Objective: To evaluate transperineal laser ablation (TPLA) with Echolaser® (Echolaser® TPLA, Elesta S.p.A., Calenzano, Italy) as a treatment for benign prostatic hyperplasia (BPH) and prostate cancer (PCa) u...Objective: To evaluate transperineal laser ablation (TPLA) with Echolaser® (Echolaser® TPLA, Elesta S.p.A., Calenzano, Italy) as a treatment for benign prostatic hyperplasia (BPH) and prostate cancer (PCa) using the Delphi consensus method.Methods: Italian and international experts on BPH and PCa participated in a collaborative consensus project. During two rounds, they expressed their opinions on Echolaser® TPLA for the treatment of BPH and PCa answering online questionnaires on indications, methodology, and potential complications of this technology. Level of agreement or disagreement to reach consensus was set at 75%. If the consensus was not achieved, questions were modified after each round. A final round was performed during an online meeting, in which results were discussed and finalized.Results: Thirty-two out of forty invited experts participated and consensus was reached on all topics. Agreement was achieved on recommending Echolaser® TPLA as a treatment of BPH in patients with ample range of prostate volume, from <40 mL (80%) to >80 mL (80%), comorbidities (100%), antiplatelet or anticoagulant treatment (96%), indwelling catheter (77%), and strong will of preserving ejaculatory function (100%). Majority of respondents agreed that Echolaser® TPLA is a potential option for the treatment of localized PCa (78%) and recommended it for low-risk PCa (90%). During the final round, experts concluded that it can be used for intermediate-risk PCa and it should be proposed as an effective alternative to radical prostatectomy for patients with strong will of avoiding urinary incontinence and sexual dysfunction. Almost all participants agreed that the transperineal approach of this organ-sparing technique is safer than transrectal and transurethral approaches typical of other techniques (97% of agreement among experts). Pre-procedural assessment, technical aspects, post-procedural catheterization, pharmacological therapy, and expected outcomes were discussed, leading to statements and recommendations.Conclusion: Echolaser® TPLA is a safe and effective procedure that treats BPH and localized PCa with satisfactory functional and sexual outcomes.展开更多
For the practical use of femtosecond laser ablation, inputs of higher laser intensity are preferred to attain high-throughput material removal. However, the use of higher laser intensities for increasing ablation rate...For the practical use of femtosecond laser ablation, inputs of higher laser intensity are preferred to attain high-throughput material removal. However, the use of higher laser intensities for increasing ablation rates can have detrimental effects on ablation quality due to excess heat generation and air ionization. This paper employs ablation using BiBurst femtosecond laser pulses, which consist of multiple bursts(2 and 5 bursts) at a repetition rate of 64 MHz, each containing multiple intra-pulses(2–20 pulses) at an ultrafast repetition rate of 4.88 GHz, to overcome these conflicting conditions. Ablation of silicon substrates using the BiBurst mode with 5 burst pulses and 20 intra-pulses successfully prevents air breakdown at packet energies higher than the pulse energy inducing the air ionization by the conventional femtosecond laser pulse irradiation(single-pulse mode). As a result, ablation speed can be enhanced by a factor of23 without deteriorating the ablation quality compared to that by the single-pulse mode ablation under the conditions where the air ionization is avoided.展开更多
Copper oxide nanoparticles(CuO NPs)were synthesised with laser ablation of a copper sheet immersed in deionized water(DW),cetrimonium bromide(CTAB),and sodium dodecyl sulphate(SDS),respectively.The target was irradiat...Copper oxide nanoparticles(CuO NPs)were synthesised with laser ablation of a copper sheet immersed in deionized water(DW),cetrimonium bromide(CTAB),and sodium dodecyl sulphate(SDS),respectively.The target was irradiated with a pulsed Nd:YAG laser at 1064 nm,600 mJ,a pulse duration of 10 ns,and a repetition rate of 5 Hz.The CuO NPs colloidal were analyzed using UV–Vis spectroscopy,the Fourier transform infrared(FTIR)spectrometer,zeta potential(ZP),X-ray diffraction(XRD),transmission electron microscope(TEM)and field emission scanning electron microscopy(FESEM).The absorption spectra of CuO NPs colloidal showed peaks at 214,215 and 220 nm and low-intensity peaks at 645,650 and 680 nm for SDS,CTAB and DW,respectively.CuO NPs’colloidal results are(−21.6,1.2,and 80 mV)for negatively,neutrally,and positively charged SDS,DW,and CTAB,respectively.The XRD pattern of the NPs revealed the presence of CuO phase planes(110)(111),(20-2)and(11-1).The TEM images revealed nearly spherical NPs,with sizes ranging from 10–90,10–50,and 10–210 nm for CuO NPs mixed with DW,SDS and CTAB,respectively.FESEM images of all the synthesized samples illustrate the formation of spherical nanostructure and large particles are observable.The CuO NPs were tested for antibacterial activity against Streptococcus mutans by using the well diffusion method.In this method,CuO NPs prepared in DW at a concentration of 200μg/mL showed a greater inhibition zone against Streptococcus mutans.展开更多
This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of...This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of synthesis is generally called pulsed laser ablation in liquid (PLAL). The presence of carbon structures in the solution contributed to the carbon content in the produced Ti-based nanomaterials. The atomic composition of the produced nanostructures was analyzed using SEM-EDS, while TEM micrographs revealed the formation of spherical TiC and core-shell nanostructures ranging from 40 to 100 nm. The identification of atomic planes by HRTEM confirmed a 10 nm diameter C-shell with a graphite structure surrounding the Ti-core. Raman spectroscopy allowed for the identification of D and G peaks for graphite and a Raman signal at 380 and 600 cm<sup>−1</sup>, assigned to TiC. The results contribute to the state-of-the-art production of TiC and Ti-C core-shell nanostructures using the PLAL route.展开更多
Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation...Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation in liquid(fs-LAL)can easily break this polarization restriction to produce irregular circular-LIPSS(CLIPPS)and crisscross-LIPSS(CCLIPSS).Fs laser ablation of silicon in water shows formation of diverse LIPSS depending on ablation conditions.At a high power of 700 mW(repetition rate of 100 kHz,pulse duration of 457 fs and wavelength of 1045 nm),single/twin CLIPSS are produced at the bottom of macropores of several microns in diameter due to the formation of strong liquid vortexes and occurrence of the vortex shedding effect.Theoretical simulations validate our speculation about the formation of liquid vortex with an ultrahigh static pressure,which can induce the microstructure trenches and cracks at the sidewalls for fs-LAL of Si and tungsten(W)in water,respectively.At a low power of 50 mW,weak liquid vortexes are produced,which only give birth to curved LIPSS in the valleys of grooves.Consequently,it is deduced that liquid vortex plays a crucial role in the formation of macropores.Mountain-like microstructures induce complex fluid dynamics which can cause the formation of CCLIPSS on them.It is believed that liquid vortexes and fluid dynamics presented in this work open up new possibilities to diversify the morphologies of LIPSS formed by fs-LAL.展开更多
We report a newly constructed laser ablation crossed molecular beam apparatus, equipped with time-sliced velocity map imaging technique, to study state-to-state metal atom reaction dynamics. Supersonic metal atomic be...We report a newly constructed laser ablation crossed molecular beam apparatus, equipped with time-sliced velocity map imaging technique, to study state-to-state metal atom reaction dynamics. Supersonic metal atomic beam is generated by laser vaporization of metal rod, and free expansion design without gas flow channel has been employed to obtain a good quality of metal atomic beam. We have chosen the crossed-beam reaction Al＋O2 to test the performance of the new apparatus. Two-rotational-states selected AIO（X^2∑＋, v=0, N and N＋I4） products can be imaged via P（N） and R（N＋14） branches of the Av=l band at the same wavelength, during （1＋1） resonance-enhanced multi-photon ionization through the AIO（D2E＋） intermediate state. In our experiment at 244.145 nm for simultaneous transitions of P（15） and R（29） branch, two rings in slice image were clearly distinguishable, corresponding to the AiO（v=0, N=IS） and AIO（v=0, N=29） states respectively. The energy difference between the two rotational levels is 403 cm^-1. The success of two states resolved in our apparatus suggests a better collisional energy resolution compared with the recent research study [J. Chem. Phys. 140, 214304 （2014）].展开更多
Radiofrequency ablation(RFA) is currently the most popular and used ablation modality for the treatment ofnon surgical patients with primary and secondary liver tumors, but in the last years microwave ablation(MWA) is...Radiofrequency ablation(RFA) is currently the most popular and used ablation modality for the treatment ofnon surgical patients with primary and secondary liver tumors, but in the last years microwave ablation(MWA) is being technically improved and widely rediscovered for clinical use. Laser thermal ablation(LTA) is by far less investigated and used than RFA and MWA, but the available data on its effectiveness and safety are quite good and comparable to those of RFA and MWA. All the three hyperthermia-based ablative techniques, when performed by skilled operators, can successfully treat all liver tumors eligible for thermal ablation, and to date in most centers of interventional oncology or interventional radiology the choice of the technique usually depends on the physician's preference and experience, or technical availability. However, RFA, MWA, and LTA have peculiar advantages and limitations that can make each of them more suitable than the other ones to treat patients and tumors with different characteristics. When all the three thermal ablation techniques are available, the choice among RFA, MWA, and LTA should be guided by their advantages and disadvantages, number, size, and location of the liver nodules, and cost-saving considerations, in order to give patients the best treatment option.展开更多
Improving the OER activity of noble metal-based materials is of profound importance to minimize the usage of noble metals and lower the cost.Here,we report considerable improvement on the catalytic activity of RuO_(2)...Improving the OER activity of noble metal-based materials is of profound importance to minimize the usage of noble metals and lower the cost.Here,we report considerable improvement on the catalytic activity of RuO_(2) particles for OER in both alkali and acid environments.The RuO_(2) nanoparticles were treated with a method of pulse laser ablation.Numerous Ru and RuO_(2) clusters were generated at the surface of RuO_(2) nanoparticles after the laser ablation,forming a lychee-shaped morphology.The larger pulse energy RuO_(2) nanoparticles are treated with,the better the OER activity can be.DFT calculations shows that the surface tension induced by the lychee-shaped morphology benefits the OER performance.Our best sample gives an overpotential of 172 mV(at 10 mA cm^(-2))and a Tafel slope of 53.5 mV dec^(-1) in KOH,while an overpotential of 219 mV and a Tafel slope of 44.9 mV dec^(-1) in H_(2)SO_(4),which are of topclass results.This work may inspire a new way to develop high-performance electrocatalysts for OER.展开更多
A novel spatial double-pulse laser ablation scheme is investigated to enhance the processing quality and efficiency fornanosecond laser ablation of silicon substrate. During the double-pulse laser ablation, two splitt...A novel spatial double-pulse laser ablation scheme is investigated to enhance the processing quality and efficiency fornanosecond laser ablation of silicon substrate. During the double-pulse laser ablation, two splitted laser beams simulta-neously irradiate on silicon surface at a tunable gap. The ablation quality and efficiency are evaluated by both scanning electron microscope and laser scanning confocal microscope. As tuning the gap distance, the ablation can be signifi-cantly enhanced if the spatial interaction between the two splitted laser pulses is optimized. The underlying physical mechanism for the interacting spatial double-pulse enhancement effect is attributed to the redistribution of the integratedenergy field, corresponding to the temperature field. This new method has great potential applications in laser microm-achining of functional devices at higher processing quality and faster speed.展开更多
We develop a new synthetical model of high-power pulsed laser ablation,which considers the dynamicabsorptance,vaporization,and plasma shielding.And the corresponding heat conduction equations with the initial andbound...We develop a new synthetical model of high-power pulsed laser ablation,which considers the dynamicabsorptance,vaporization,and plasma shielding.And the corresponding heat conduction equations with the initial andboundary conditions are given.The numerical solutions are obtained under the reasonable technical parameter condi-tions by taking YBa_2Cu_3O_7 target for example.The space-dependence and time-dependence of temperature in targetat a certain laser fluence are presented,then,the transmitted intensity through plasma plume,space-dependence oftemperature and ablation rate for different laser fluences are significantly analyzed.As a result,the satisfactorily goodagreement between our numerical results and experimental results indicates that the influences of the dynamic absorp-tance,vaporization,and plasma shielding cannot be neglected.Taking all the three mechanisms above simultaneouslyinto account for the first time,we cause the present model to be more practical.展开更多
A preliminary experiment triggering a plasma current quench by laser ablation of high-Z impurities has been performed in the HL-1M tokamak. The injection of impurities with higher electric charges into tokamak plasmas...A preliminary experiment triggering a plasma current quench by laser ablation of high-Z impurities has been performed in the HL-1M tokamak. The injection of impurities with higher electric charges into tokamak plasmas can increase the radiation cooling of the plasma. Resistive, highly radiating plasma formed prior to the thermal quench can dissipate both the thermal and magnetic energies, which is possibly a simple and potential approach to reducing significantly the plasma thermal energy and magnetic energy before a disruption thereby a safe plasma termination is obtained.展开更多
Aggressive cytoreduction can prolong survival in patients with unresectable liver metastases(LM)from neuroendocrine neoplasms(NEN),and minimally invasive,liver-directed therapies are gaining increasing interest.Cathet...Aggressive cytoreduction can prolong survival in patients with unresectable liver metastases(LM)from neuroendocrine neoplasms(NEN),and minimally invasive,liver-directed therapies are gaining increasing interest.Catheter-based treatments are used in disseminated disease,whereas ablation techniques are usually indicated when the number of LM is limited.Although radiofrequency ablation(RFA)is by far the most used ablative technique,the goal of this opinion review is to explore the potential role of laser ablation(LA)in the treatment of LM from NEN.LA uses thinner needles than RFA,and this is an advantage when the tumors are in at-risk locations.Moreover,the multi-fiber technique enables the use of one to four laser fibers at once,and each fiber provides an almost spherical thermal lesion of 12-15 mm in diameter.Such a characteristic enables to tailor the size of each thermal lesion to the size of each tumor,sparing the liver parenchyma more than any other liver-directed therapy,and allowing for repeated treatments with low risk of liver failure.A recent retrospective study reporting the largest series of LM treated with LA documents both safety and effectiveness of LA,that can play a useful role in the multimodality approach to LM from NEN.展开更多
In this review we consider the development of optical near-field imaging and nanostructuring by means of laser ablation since its early stages around the turn of the century.The interaction of short,intense laser puls...In this review we consider the development of optical near-field imaging and nanostructuring by means of laser ablation since its early stages around the turn of the century.The interaction of short,intense laser pulses with nanoparticles on a surface leads to laterally tightly confined,strongly enhanced electromagnetic fields below and around the nano-objects,which can easily give rise to nanoablation.This effect can be exploited for structuring substrate surfaces on a length scale well below the diffraction limit,one to two orders smaller than the incident laser wavelength.We report on structure formation by the optical near field of both dielectric and metallic nano-objects,the latter allowing even stronger and more localized enhancement of the electromagnetic field due to the excitation of plasmon modes.Structuring with this method enables one to nanopattern large areas in a one-step parallel process with just one laser pulse irradiation,and in the course of time various improvements have been added to this technique,so that also more complex and even arbitrary structures can be produced by means of nanoablation.The near-field patterns generated on the surface can be read out with high resolution techniques like scanning electron microscopy and atomic force microscopy and provide thus a valuable tool-in conjunction with numerical calculations like finite difference time domain(FDTD)simulations-for a deeper understanding of the optical and plasmonic properties of nanostructures and their applications.展开更多
This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid.In recent years,pulsed laser ablation in liquid(PLAL)has been widely employed for p...This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid.In recent years,pulsed laser ablation in liquid(PLAL)has been widely employed for polyynes synthesis thanks to its flexibility with varying laser parameters,solvents,and targets.This allows the control of sp-carbon chains properties as yield,length,termination and stability.Although many reviews related to PLAL have been published,a comprehensive work reporting the current status and advances related to the synthesis of sp-carbon chains by PLAL is still missing.Here we first review the principle of PLAL and the mechanisms of formation of sp-carbon chains.Then we discuss the role of laser fluence(i.e.energy density),solvent,and target for sp-carbon chains synthesis.Lastly,we report the progress related to the prolonged stability of sp-carbon chains by PLAL encapsulated in polymeric matrices.This review will be a helpful guide for researchers interested in synthesizing sp-carbon chains by PLAL.展开更多
Increasing number of endovenous techniques are available for the treatment of saphenous vein reflux and endovenous laser ablation（EVLA） is a frequently used method. A newly developed alternative, based on thermal th...Increasing number of endovenous techniques are available for the treatment of saphenous vein reflux and endovenous laser ablation（EVLA） is a frequently used method. A newly developed alternative, based on thermal therapy, is endovenous microwave ablation（EMA）. This study evaluated the effect of the two procedures, in terms of coagulation and histological changes, in occluding lateral veins in goats. Twelve animals were randomized into two group, with 6 treated with EMA（EMA group）, and the rest 6 with EVLA（EVLA group）. Results of coagulation, including coagulation, fibrinolysis and platelet activation, were assessed at three or four different time points： before, immediately after, 24 h（and 48 h） after ablation. The diameter change, a measure of efficacy, was ultrasonographically measured before and 1 month after the ablation. Histological changes were grossly and microscopically evaluated immediately, 1 and 3 month（s） after the ablation. The length of the ablated vein and preoperative average diameter were comparable between the two groups. In both EMA and EVLA groups, several coagulation parameters, fibrinolysis and platelet activation parameters only underwent slight changes. Ultrasound imaging displayed that the diameter reduction of the veins treated by EMA was significantly larger than by EVLA, in consistent with the results of macroscopic examination. Microscopic examination revealed necrosis and thickening of the vein wall, and occlusion of the lumen within 3 months after ablation in both EMA and EVLA groups. It is concluded that EMA is a minimally invasive therapy, which appears to be safe and effective for treatment of lateral veins in goats.展开更多
Titanite(CaTi2SiO5) is an important accessory mineral not only in magmatic and metamorphic rocks,but also commonly in hydrothermal mineral deposits. It incorporates appreciable amounts(usually 10×10-6 s to 100&#...Titanite(CaTi2SiO5) is an important accessory mineral not only in magmatic and metamorphic rocks,but also commonly in hydrothermal mineral deposits. It incorporates appreciable amounts(usually 10×10-6 s to 100×10-6 s) of U and Th into its structure and has a closure temperature of Pb diffusion higher than 660～700 ℃(Scott and St-Onge,1995) ,making it an ideal U-Th-Pb geochronometer. The Daye metallogenic district is located in the west of the giant Middle-Lower Yangtze River(MLYR) Cu-Fe-Au province,eastern China and is well endowed with Fe,Cu,and polymetallic skarn deposits.展开更多
We present the results of laser ablations cleanness process on bronzes covered by a chloride patina in two different media： marine water and air. The bronze chloride disease was obtained treating commercial bronzes w...We present the results of laser ablations cleanness process on bronzes covered by a chloride patina in two different media： marine water and air. The bronze chloride disease was obtained treating commercial bronzes with HCI 37%, for 190 h. X-ray photoelectron spectroscopy and optical images taken on treated samples show the formation of a CuCIJCu2CI2 patina of about 300 m Laser ablation reduces in both medium the patina thickness at few microns without changing the chemical composition of bronze. X-ray analysis show the most effectiveness of ablation procedure in marine water where its only effect is the patina reduction without introducing changes in bronze chemical composition. Ablation in air, instead, reduces the patina but favors the adsorption of air oxygen and carbon on sample surfaces and a progressive ＂carbonization＂ of samples.展开更多
Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O ...Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O x@ITO electrodes are characterized by a low amount of iron coverage of 16–50 nmol/cm^2,and show electrocatalytic activity towards water oxidation in neutral phosphate buffer pH 7 with 0.58 V overpotential and quantitative Faradaic efficiency towards oxygen production. XPS analysis on the oxygen region of the FeOx films reveals a substantial hydration of the surface after catalysis, recognized as a crucial step to access reactivity.展开更多
The 2024 aluminum alloy is used extensively in the aircraft and aerospace industries because of its excellent mechanical properties.However,the weldability of 2024 aluminum alloy is generally low because it contains a...The 2024 aluminum alloy is used extensively in the aircraft and aerospace industries because of its excellent mechanical properties.However,the weldability of 2024 aluminum alloy is generally low because it contains a high number of solutes,such as copper(Cu),magnesium(Mg),and manganese(Mn),causing solidification cracking.If high speed welding of 2024 aluminum alloy without the use of filler is achieved,the applicability of 2024 aluminum alloys will expand.Grain refining is one of the methods used to prevent solidification cracking in weld metal,although it has never been achieved for high-speed laser welding of 2024 aluminum alloy without filler.Here,we propose a short-pulsed,laser-induced,grain-refining method during continuous wave laser welding without filler.Bead-on-plate welding was performed on a 2024-T3 aluminum alloy at a welding speed of 1 m min−1 with a single mode fiber laser at a wavelength of 1070 nm and power of 1 kW.Areas in and around the molten pool were irradiated with nanosecond laser pulses at a wavelength of 1064 nm,pulse width of 10 ns,and pulse energy of 430 mJ.The grain-refinement effect was confirmed when laser pulses were irradiated on the molten pool.The grain-refinement region was formed in a semicircular shape along the solid–liquid interface.Results of the vertical section indicate that the grain-refinement region reached a depth of 1 mm along the solid–liquid interface.The Vickers hardness test results demonstrated that the hardness increased as a result of grain refinement and that the progress of solidification cracking was suppressed in the grain refinement region.展开更多
In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches...In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.展开更多
文摘Objective: To evaluate transperineal laser ablation (TPLA) with Echolaser® (Echolaser® TPLA, Elesta S.p.A., Calenzano, Italy) as a treatment for benign prostatic hyperplasia (BPH) and prostate cancer (PCa) using the Delphi consensus method.Methods: Italian and international experts on BPH and PCa participated in a collaborative consensus project. During two rounds, they expressed their opinions on Echolaser® TPLA for the treatment of BPH and PCa answering online questionnaires on indications, methodology, and potential complications of this technology. Level of agreement or disagreement to reach consensus was set at 75%. If the consensus was not achieved, questions were modified after each round. A final round was performed during an online meeting, in which results were discussed and finalized.Results: Thirty-two out of forty invited experts participated and consensus was reached on all topics. Agreement was achieved on recommending Echolaser® TPLA as a treatment of BPH in patients with ample range of prostate volume, from <40 mL (80%) to >80 mL (80%), comorbidities (100%), antiplatelet or anticoagulant treatment (96%), indwelling catheter (77%), and strong will of preserving ejaculatory function (100%). Majority of respondents agreed that Echolaser® TPLA is a potential option for the treatment of localized PCa (78%) and recommended it for low-risk PCa (90%). During the final round, experts concluded that it can be used for intermediate-risk PCa and it should be proposed as an effective alternative to radical prostatectomy for patients with strong will of avoiding urinary incontinence and sexual dysfunction. Almost all participants agreed that the transperineal approach of this organ-sparing technique is safer than transrectal and transurethral approaches typical of other techniques (97% of agreement among experts). Pre-procedural assessment, technical aspects, post-procedural catheterization, pharmacological therapy, and expected outcomes were discussed, leading to statements and recommendations.Conclusion: Echolaser® TPLA is a safe and effective procedure that treats BPH and localized PCa with satisfactory functional and sexual outcomes.
基金supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) Grant Number JPMXS0118067246。
文摘For the practical use of femtosecond laser ablation, inputs of higher laser intensity are preferred to attain high-throughput material removal. However, the use of higher laser intensities for increasing ablation rates can have detrimental effects on ablation quality due to excess heat generation and air ionization. This paper employs ablation using BiBurst femtosecond laser pulses, which consist of multiple bursts(2 and 5 bursts) at a repetition rate of 64 MHz, each containing multiple intra-pulses(2–20 pulses) at an ultrafast repetition rate of 4.88 GHz, to overcome these conflicting conditions. Ablation of silicon substrates using the BiBurst mode with 5 burst pulses and 20 intra-pulses successfully prevents air breakdown at packet energies higher than the pulse energy inducing the air ionization by the conventional femtosecond laser pulse irradiation(single-pulse mode). As a result, ablation speed can be enhanced by a factor of23 without deteriorating the ablation quality compared to that by the single-pulse mode ablation under the conditions where the air ionization is avoided.
文摘Copper oxide nanoparticles(CuO NPs)were synthesised with laser ablation of a copper sheet immersed in deionized water(DW),cetrimonium bromide(CTAB),and sodium dodecyl sulphate(SDS),respectively.The target was irradiated with a pulsed Nd:YAG laser at 1064 nm,600 mJ,a pulse duration of 10 ns,and a repetition rate of 5 Hz.The CuO NPs colloidal were analyzed using UV–Vis spectroscopy,the Fourier transform infrared(FTIR)spectrometer,zeta potential(ZP),X-ray diffraction(XRD),transmission electron microscope(TEM)and field emission scanning electron microscopy(FESEM).The absorption spectra of CuO NPs colloidal showed peaks at 214,215 and 220 nm and low-intensity peaks at 645,650 and 680 nm for SDS,CTAB and DW,respectively.CuO NPs’colloidal results are(−21.6,1.2,and 80 mV)for negatively,neutrally,and positively charged SDS,DW,and CTAB,respectively.The XRD pattern of the NPs revealed the presence of CuO phase planes(110)(111),(20-2)and(11-1).The TEM images revealed nearly spherical NPs,with sizes ranging from 10–90,10–50,and 10–210 nm for CuO NPs mixed with DW,SDS and CTAB,respectively.FESEM images of all the synthesized samples illustrate the formation of spherical nanostructure and large particles are observable.The CuO NPs were tested for antibacterial activity against Streptococcus mutans by using the well diffusion method.In this method,CuO NPs prepared in DW at a concentration of 200μg/mL showed a greater inhibition zone against Streptococcus mutans.
文摘This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of synthesis is generally called pulsed laser ablation in liquid (PLAL). The presence of carbon structures in the solution contributed to the carbon content in the produced Ti-based nanomaterials. The atomic composition of the produced nanostructures was analyzed using SEM-EDS, while TEM micrographs revealed the formation of spherical TiC and core-shell nanostructures ranging from 40 to 100 nm. The identification of atomic planes by HRTEM confirmed a 10 nm diameter C-shell with a graphite structure surrounding the Ti-core. Raman spectroscopy allowed for the identification of D and G peaks for graphite and a Raman signal at 380 and 600 cm<sup>−1</sup>, assigned to TiC. The results contribute to the state-of-the-art production of TiC and Ti-C core-shell nanostructures using the PLAL route.
基金This work was supported by the national key R&D program for internation-al collaboration under grant No.2018YFE9103900in part by the Nat-ural Science Foundation of China(NSFC)grant No.11972384 and the Guangdong MEPP Fund,grant No.GDOE[2019]A01.
文摘Orientations of laser induced periodic surface structures(LIPSS)are usually considered to be governed by the laser polarization state.In this work,we unveil that fluid dynamics induced by femtosecond(fs)laser ablation in liquid(fs-LAL)can easily break this polarization restriction to produce irregular circular-LIPSS(CLIPPS)and crisscross-LIPSS(CCLIPSS).Fs laser ablation of silicon in water shows formation of diverse LIPSS depending on ablation conditions.At a high power of 700 mW(repetition rate of 100 kHz,pulse duration of 457 fs and wavelength of 1045 nm),single/twin CLIPSS are produced at the bottom of macropores of several microns in diameter due to the formation of strong liquid vortexes and occurrence of the vortex shedding effect.Theoretical simulations validate our speculation about the formation of liquid vortex with an ultrahigh static pressure,which can induce the microstructure trenches and cracks at the sidewalls for fs-LAL of Si and tungsten(W)in water,respectively.At a low power of 50 mW,weak liquid vortexes are produced,which only give birth to curved LIPSS in the valleys of grooves.Consequently,it is deduced that liquid vortex plays a crucial role in the formation of macropores.Mountain-like microstructures induce complex fluid dynamics which can cause the formation of CCLIPSS on them.It is believed that liquid vortexes and fluid dynamics presented in this work open up new possibilities to diversify the morphologies of LIPSS formed by fs-LAL.
基金We are indebted to Prof. Kopin Liu （IAMS, Taipei） for stimulating discussions on going experiments, to Prof. Ming-fei Zhou and Assoc. Prof. Guan-jun Wang （Fudan University, Shanghai） for assistance in building machine, to Prof. Uzi. Even （Tel Aviv University, Tel Aviv） for discussions oil E1 valve employnmnt in laser ablation, and to Prof. Xue-ming Yang＇s group （DICP, Dalian） for new Iaser system. This work was supported by the National Natural Science Foundation of China （No.21322309） and the Program for Professor of Special Appointment （Eastern Scholar） at Shanghai Institutions of Higher Learning.
文摘We report a newly constructed laser ablation crossed molecular beam apparatus, equipped with time-sliced velocity map imaging technique, to study state-to-state metal atom reaction dynamics. Supersonic metal atomic beam is generated by laser vaporization of metal rod, and free expansion design without gas flow channel has been employed to obtain a good quality of metal atomic beam. We have chosen the crossed-beam reaction Al＋O2 to test the performance of the new apparatus. Two-rotational-states selected AIO（X^2∑＋, v=0, N and N＋I4） products can be imaged via P（N） and R（N＋14） branches of the Av=l band at the same wavelength, during （1＋1） resonance-enhanced multi-photon ionization through the AIO（D2E＋） intermediate state. In our experiment at 244.145 nm for simultaneous transitions of P（15） and R（29） branch, two rings in slice image were clearly distinguishable, corresponding to the AiO（v=0, N=IS） and AIO（v=0, N=29） states respectively. The energy difference between the two rotational levels is 403 cm^-1. The success of two states resolved in our apparatus suggests a better collisional energy resolution compared with the recent research study [J. Chem. Phys. 140, 214304 （2014）].
文摘Radiofrequency ablation(RFA) is currently the most popular and used ablation modality for the treatment ofnon surgical patients with primary and secondary liver tumors, but in the last years microwave ablation(MWA) is being technically improved and widely rediscovered for clinical use. Laser thermal ablation(LTA) is by far less investigated and used than RFA and MWA, but the available data on its effectiveness and safety are quite good and comparable to those of RFA and MWA. All the three hyperthermia-based ablative techniques, when performed by skilled operators, can successfully treat all liver tumors eligible for thermal ablation, and to date in most centers of interventional oncology or interventional radiology the choice of the technique usually depends on the physician's preference and experience, or technical availability. However, RFA, MWA, and LTA have peculiar advantages and limitations that can make each of them more suitable than the other ones to treat patients and tumors with different characteristics. When all the three thermal ablation techniques are available, the choice among RFA, MWA, and LTA should be guided by their advantages and disadvantages, number, size, and location of the liver nodules, and cost-saving considerations, in order to give patients the best treatment option.
基金the financial support from the Key Research and Development of Ministry of Science and Technology of China(No.2018YFE0202600)National Natural Science Foundation of China(No.11947070,No.51902220,No.51572183)+1 种基金Materials Science&Engineering of Zhejiang Province First-Class Discipline(No.P61021902)Cultivating Program of Taizhou University(No.2018PY050)。
文摘Improving the OER activity of noble metal-based materials is of profound importance to minimize the usage of noble metals and lower the cost.Here,we report considerable improvement on the catalytic activity of RuO_(2) particles for OER in both alkali and acid environments.The RuO_(2) nanoparticles were treated with a method of pulse laser ablation.Numerous Ru and RuO_(2) clusters were generated at the surface of RuO_(2) nanoparticles after the laser ablation,forming a lychee-shaped morphology.The larger pulse energy RuO_(2) nanoparticles are treated with,the better the OER activity can be.DFT calculations shows that the surface tension induced by the lychee-shaped morphology benefits the OER performance.Our best sample gives an overpotential of 172 mV(at 10 mA cm^(-2))and a Tafel slope of 53.5 mV dec^(-1) in KOH,while an overpotential of 219 mV and a Tafel slope of 44.9 mV dec^(-1) in H_(2)SO_(4),which are of topclass results.This work may inspire a new way to develop high-performance electrocatalysts for OER.
基金We are grateful for financial supports from the National Natural Science Foundation of China under Grant （No. 61605162） Singapore Maritime Institute under the research project Grant （No. SMI-2015-OF-10）+1 种基金 Natural Science Foundation of Fujian Province of China under Grant （No. 2017J05106） and Collaborative Innovation Center of High-End Equipment Manufacturing in Fujian.
文摘A novel spatial double-pulse laser ablation scheme is investigated to enhance the processing quality and efficiency fornanosecond laser ablation of silicon substrate. During the double-pulse laser ablation, two splitted laser beams simulta-neously irradiate on silicon surface at a tunable gap. The ablation quality and efficiency are evaluated by both scanning electron microscope and laser scanning confocal microscope. As tuning the gap distance, the ablation can be signifi-cantly enhanced if the spatial interaction between the two splitted laser pulses is optimized. The underlying physical mechanism for the interacting spatial double-pulse enhancement effect is attributed to the redistribution of the integratedenergy field, corresponding to the temperature field. This new method has great potential applications in laser microm-achining of functional devices at higher processing quality and faster speed.
基金National Natural Science Foundation of China under Grant Nos.10675048 and 10604017the Natural Science Foundation of Hubei Province under Grant No.2001ABB099the Sunshine Foundation of Wuhan City under Grant No.20045006071-40
文摘We develop a new synthetical model of high-power pulsed laser ablation,which considers the dynamicabsorptance,vaporization,and plasma shielding.And the corresponding heat conduction equations with the initial andboundary conditions are given.The numerical solutions are obtained under the reasonable technical parameter condi-tions by taking YBa_2Cu_3O_7 target for example.The space-dependence and time-dependence of temperature in targetat a certain laser fluence are presented,then,the transmitted intensity through plasma plume,space-dependence oftemperature and ablation rate for different laser fluences are significantly analyzed.As a result,the satisfactorily goodagreement between our numerical results and experimental results indicates that the influences of the dynamic absorp-tance,vaporization,and plasma shielding cannot be neglected.Taking all the three mechanisms above simultaneouslyinto account for the first time,we cause the present model to be more practical.
基金Project supported by IAEA International Science Foundation （Grant No IS 105123）.
文摘A preliminary experiment triggering a plasma current quench by laser ablation of high-Z impurities has been performed in the HL-1M tokamak. The injection of impurities with higher electric charges into tokamak plasmas can increase the radiation cooling of the plasma. Resistive, highly radiating plasma formed prior to the thermal quench can dissipate both the thermal and magnetic energies, which is possibly a simple and potential approach to reducing significantly the plasma thermal energy and magnetic energy before a disruption thereby a safe plasma termination is obtained.
文摘Aggressive cytoreduction can prolong survival in patients with unresectable liver metastases(LM)from neuroendocrine neoplasms(NEN),and minimally invasive,liver-directed therapies are gaining increasing interest.Catheter-based treatments are used in disseminated disease,whereas ablation techniques are usually indicated when the number of LM is limited.Although radiofrequency ablation(RFA)is by far the most used ablative technique,the goal of this opinion review is to explore the potential role of laser ablation(LA)in the treatment of LM from NEN.LA uses thinner needles than RFA,and this is an advantage when the tumors are in at-risk locations.Moreover,the multi-fiber technique enables the use of one to four laser fibers at once,and each fiber provides an almost spherical thermal lesion of 12-15 mm in diameter.Such a characteristic enables to tailor the size of each thermal lesion to the size of each tumor,sparing the liver parenchyma more than any other liver-directed therapy,and allowing for repeated treatments with low risk of liver failure.A recent retrospective study reporting the largest series of LM treated with LA documents both safety and effectiveness of LA,that can play a useful role in the multimodality approach to LM from NEN.
文摘In this review we consider the development of optical near-field imaging and nanostructuring by means of laser ablation since its early stages around the turn of the century.The interaction of short,intense laser pulses with nanoparticles on a surface leads to laterally tightly confined,strongly enhanced electromagnetic fields below and around the nano-objects,which can easily give rise to nanoablation.This effect can be exploited for structuring substrate surfaces on a length scale well below the diffraction limit,one to two orders smaller than the incident laser wavelength.We report on structure formation by the optical near field of both dielectric and metallic nano-objects,the latter allowing even stronger and more localized enhancement of the electromagnetic field due to the excitation of plasmon modes.Structuring with this method enables one to nanopattern large areas in a one-step parallel process with just one laser pulse irradiation,and in the course of time various improvements have been added to this technique,so that also more complex and even arbitrary structures can be produced by means of nanoablation.The near-field patterns generated on the surface can be read out with high resolution techniques like scanning electron microscopy and atomic force microscopy and provide thus a valuable tool-in conjunction with numerical calculations like finite difference time domain(FDTD)simulations-for a deeper understanding of the optical and plasmonic properties of nanostructures and their applications.
基金funding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program ERC Consolidator Grant(ERC Co G2016 Esp LORE grant agreement No.724610,website:www.esplore.polimi.it)
文摘This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid.In recent years,pulsed laser ablation in liquid(PLAL)has been widely employed for polyynes synthesis thanks to its flexibility with varying laser parameters,solvents,and targets.This allows the control of sp-carbon chains properties as yield,length,termination and stability.Although many reviews related to PLAL have been published,a comprehensive work reporting the current status and advances related to the synthesis of sp-carbon chains by PLAL is still missing.Here we first review the principle of PLAL and the mechanisms of formation of sp-carbon chains.Then we discuss the role of laser fluence(i.e.energy density),solvent,and target for sp-carbon chains synthesis.Lastly,we report the progress related to the prolonged stability of sp-carbon chains by PLAL encapsulated in polymeric matrices.This review will be a helpful guide for researchers interested in synthesizing sp-carbon chains by PLAL.
基金supported by grants from Shanghai Science and Technology Commission(No.13401903900)Municipal Health Bureau of Traditional Chinese Medicine Development Office(No.ZYSNXD-YL-YSZK010 and No.ZXb Z2012-09)Appropriate Technology Project of Shanghai Shenkang Hospital Development Center(No.SHDC12014242)
文摘Increasing number of endovenous techniques are available for the treatment of saphenous vein reflux and endovenous laser ablation（EVLA） is a frequently used method. A newly developed alternative, based on thermal therapy, is endovenous microwave ablation（EMA）. This study evaluated the effect of the two procedures, in terms of coagulation and histological changes, in occluding lateral veins in goats. Twelve animals were randomized into two group, with 6 treated with EMA（EMA group）, and the rest 6 with EVLA（EVLA group）. Results of coagulation, including coagulation, fibrinolysis and platelet activation, were assessed at three or four different time points： before, immediately after, 24 h（and 48 h） after ablation. The diameter change, a measure of efficacy, was ultrasonographically measured before and 1 month after the ablation. Histological changes were grossly and microscopically evaluated immediately, 1 and 3 month（s） after the ablation. The length of the ablated vein and preoperative average diameter were comparable between the two groups. In both EMA and EVLA groups, several coagulation parameters, fibrinolysis and platelet activation parameters only underwent slight changes. Ultrasound imaging displayed that the diameter reduction of the veins treated by EMA was significantly larger than by EVLA, in consistent with the results of macroscopic examination. Microscopic examination revealed necrosis and thickening of the vein wall, and occlusion of the lumen within 3 months after ablation in both EMA and EVLA groups. It is concluded that EMA is a minimally invasive therapy, which appears to be safe and effective for treatment of lateral veins in goats.
基金supported by the NSFC(Grants Nos.90814004 and 40821061)
文摘Titanite(CaTi2SiO5) is an important accessory mineral not only in magmatic and metamorphic rocks,but also commonly in hydrothermal mineral deposits. It incorporates appreciable amounts(usually 10×10-6 s to 100×10-6 s) of U and Th into its structure and has a closure temperature of Pb diffusion higher than 660～700 ℃(Scott and St-Onge,1995) ,making it an ideal U-Th-Pb geochronometer. The Daye metallogenic district is located in the west of the giant Middle-Lower Yangtze River(MLYR) Cu-Fe-Au province,eastern China and is well endowed with Fe,Cu,and polymetallic skarn deposits.
文摘We present the results of laser ablations cleanness process on bronzes covered by a chloride patina in two different media： marine water and air. The bronze chloride disease was obtained treating commercial bronzes with HCI 37%, for 190 h. X-ray photoelectron spectroscopy and optical images taken on treated samples show the formation of a CuCIJCu2CI2 patina of about 300 m Laser ablation reduces in both medium the patina thickness at few microns without changing the chemical composition of bronze. X-ray analysis show the most effectiveness of ablation procedure in marine water where its only effect is the patina reduction without introducing changes in bronze chemical composition. Ablation in air, instead, reduces the patina but favors the adsorption of air oxygen and carbon on sample surfaces and a progressive ＂carbonization＂ of samples.
基金supported by the Italian Ministero dell’Università e della Ricerca (MIUR), (FIRB RBAP11C58Y, "Nano Solar" and PRIN 2010 "Hi-Phuture")COST action CM1205 "CARISMA: CAtalytic Rout Ines for Small Molecule Activation"
文摘Iron oxide nanoparticles（FeOx NPs, 5–30 nm size） prepared via laser ablation in liquid were supported onto Indium Tin Oxide conductive glass slides by magnetophoretic deposition（MD） technique. The resulting Fe O x@ITO electrodes are characterized by a low amount of iron coverage of 16–50 nmol/cm^2,and show electrocatalytic activity towards water oxidation in neutral phosphate buffer pH 7 with 0.58 V overpotential and quantitative Faradaic efficiency towards oxygen production. XPS analysis on the oxygen region of the FeOx films reveals a substantial hydration of the surface after catalysis, recognized as a crucial step to access reactivity.
基金The authors would like to thank Mr Tetsuji Kuwabara of NAC Image Technology Inc.for support of high-speed photographingThis work was supported in part by MEXT Quantum Leap Flagship Program(MEXT Q-LEAP)Grant No.JPMXS0118068348,JSPS KAKENHI Grant Nos.JP16H04247,JP16K14417,and 19K22061This work was funded in part by ImPACT Program of Council for Science,Technology and Innovation(Cabinet Office,Government of Japan).
文摘The 2024 aluminum alloy is used extensively in the aircraft and aerospace industries because of its excellent mechanical properties.However,the weldability of 2024 aluminum alloy is generally low because it contains a high number of solutes,such as copper(Cu),magnesium(Mg),and manganese(Mn),causing solidification cracking.If high speed welding of 2024 aluminum alloy without the use of filler is achieved,the applicability of 2024 aluminum alloys will expand.Grain refining is one of the methods used to prevent solidification cracking in weld metal,although it has never been achieved for high-speed laser welding of 2024 aluminum alloy without filler.Here,we propose a short-pulsed,laser-induced,grain-refining method during continuous wave laser welding without filler.Bead-on-plate welding was performed on a 2024-T3 aluminum alloy at a welding speed of 1 m min−1 with a single mode fiber laser at a wavelength of 1070 nm and power of 1 kW.Areas in and around the molten pool were irradiated with nanosecond laser pulses at a wavelength of 1064 nm,pulse width of 10 ns,and pulse energy of 430 mJ.The grain-refinement effect was confirmed when laser pulses were irradiated on the molten pool.The grain-refinement region was formed in a semicircular shape along the solid–liquid interface.Results of the vertical section indicate that the grain-refinement region reached a depth of 1 mm along the solid–liquid interface.The Vickers hardness test results demonstrated that the hardness increased as a result of grain refinement and that the progress of solidification cracking was suppressed in the grain refinement region.
文摘In this work, the results of a study of laser ablation cleaning process on ceramic artifacts are presented. The experiments were conducted on a ＂Carosello＂, a structural hollow element made of clay, placed in arches, in domes or even in the walls of buildings such as churches and houses. Our results show that laser ablation techniques is able to remove the surface impurity patina from artifacts surface without changes the chemical composition and the optical properties of ceramic. Moreover, because the laser cleaning heats only locally the surface of the sample, this method don＇t preclude the possibility to apply on artifact the thermo-luminescence dating process.
