Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production...Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2)permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2)-δcatalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2)injection into the reaction can be easily fine-tuned.展开更多
Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological st...Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.展开更多
Elaidic acid(EA)stimulation can lead to endoplasmic reticulum stress(ERS),accompanied by a large release of Ca^(2+),and ultimately the activation of NLRP3 inflammasome in Kupffer cells(KCs).Mitochondrial instability o...Elaidic acid(EA)stimulation can lead to endoplasmic reticulum stress(ERS),accompanied by a large release of Ca^(2+),and ultimately the activation of NLRP3 inflammasome in Kupffer cells(KCs).Mitochondrial instability or dysfunction may be the key stimulating factors to activate NLRP3 inflammasome,and sustained Ca^(2+)transfer can result in mitochondrial dysfunction.We focused on KCs to explore the damage to mitochondria by EA.After EA stimulation,cells produced an oxidative stress(OS)response with a significant increase in ROS release.Immunoprecipitation experiments and the addition of inhibitors revealed that the increase in the level of intracellular Ca^(2+)led to Ca^(2+)accumulation in the mitochondrial matrix via mitochondria-associated membranes(MAMs).This was accompanied by a significant release of m ROS,loss of MMP and ATP,and a significant increase in mitochondrial permeability transition pore opening,ultimately leading to mitochondrial instability.These findings confirmed the mechanism that EA induced mitochondrial Ca^(2+)imbalance in KCs via MAM,ultimately leading to mitochondrial dysfunction.Meanwhile,EA induced OS and the decrease of MMP and ATP in rat liver,and significant lesions were found in liver mitochondria.Swelling of the inner mitochondrial cristae and mitochondrial vacuolization occurred,with a marked increase in lipid droplets.展开更多
Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,s...Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,such as the presence of interfacial voids,hardening of polymer chains,and blockage of micropores by polymers between common MMMsfillers and the polymer matrix,currently limit the gas sep-aration performance of MMMs.Ternary phase MMMs(consisting of afiller,an additive,and a matrix)made by adding a third compound,usually functionalized additives,can overcome the structural problems of binary phase MMMs and positively impact membrane separation performance.This review introduces the structure and fabrication processes for ternary MMMs,categorizes various nanofillers and the third component,and summarizes and analyzes in detail the CO_(2) separation performance of newly developed ternary MMMs based on both rubbery and glassy polymers.Based on this separation data,the challenges of ternary MMMs are also discussed.Finally,future directions for ternary MMMs are proposed.展开更多
Objective: The objective of this study was to determine if early rupture of membranes (ROM) in women undergoing induction of labor (IOL) at term is associated with an increased rate of clinical chorioamnionitis. Study...Objective: The objective of this study was to determine if early rupture of membranes (ROM) in women undergoing induction of labor (IOL) at term is associated with an increased rate of clinical chorioamnionitis. Study Design: A retrospective cohort study was performed on women undergoing IOL. Early ROM was defined as ROM at a modified Bishop score less than 5, cervical dilation less than 4 cm, or cervical effacement less than 80%. The rate of clinical chorioamnionitis was compared between women with early and late ROM. Results: The rate of clinical chorioamnionitis was 8.6% (24/279). ROM at an effacement of less than 80% was associated with a rate of clinical chorioamnionitis of 15.4% (12/78) compared to 6.0% (12/201) at an effacement of equal to or greater than 80%, p = 0.017. The rate of cesarean delivery was higher for patients with early ROM by any definition: 32% compared to 17.5% by modified Bishop score (p = 0.031), 32.4% versus 18.2% by cervical dilation (p = 0.049), and 33.3% versus 14.9% by cervical effacement (p = 0.001). Conclusions: In patients undergoing IOL, early ROM may be associated with an increased rate of clinical chorioamnionitis when performed at a cervical effacement of less than 80% and an increased rate of cesarean delivery.展开更多
Nanofiber membranes(NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a ...Nanofiber membranes(NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a great challenge due to the enormous reflection and incredibly poor transmission generated by the nanofiber-air interface. In this research, we report a general strategy for the preparation of flexible temperature-responsive transparent(TRT) membranes,which achieves a rapid transformation of NFMs from opaque to highly transparent under a narrow temperature window. In this process, the phase change material eicosane is coated on the surface of the polyurethane nanofibers by electrospray technology. When the temperature rises to 37 ℃, eicosane rapidly completes the phase transition and establishes the light transmission path between the nanofibers, preventing light loss from reflection at the nanofiber-air interface. The resulting TRT membrane exhibits high transmittance(> 90%), and fast response(5 s). This study achieves the first TRT transition of NFMs, offering a general strategy for building highly transparent nanofiber materials, shaping the future of next-generation intelligent temperature monitoring, anti-counterfeiting measures, and other high-performance devices.展开更多
Objective:Placement of human placenta derived grafts during robotic-assisted radical prostatectomy(RARP)hastens the return of continence and potency.The long-term impact on the oncologic outcomes remains to be investi...Objective:Placement of human placenta derived grafts during robotic-assisted radical prostatectomy(RARP)hastens the return of continence and potency.The long-term impact on the oncologic outcomes remains to be investigated.Our objective was to determine the oncologic outcomes of patients with dehydrated human amnion chorion membrane(dHACM)at RARP compared to a matched cohort.Methods:In a referral centre,from August 2013 to October 2019,599 patients used dHACM in bilateral nerve-sparing RARP.We excluded patients with less than 12 months follow-up,simple prostatectomy,and unilateral nerve-sparing.Patients with dHACM(amnio group)were 529,and were propensity score matched 1:1 to 2465 patients without dHACM(non-amnio group)and a minimum follow-up of 36 months.At the time of RARP,dHACM was placed around the neurovascular bundle in the amnio group.Continuous and categorical variables in matched groups was tested by two-sample Kolmogorov-Smirnov test and Fisher's exact test respectively.Outcomes measured were biochemical recurrence(BCR),adjuvant and salvage therapy rates.Results:Propensity score matching resulted in two groups of 444 patients.Cumulative incidence functions for BCR did not show a difference between the groups(p=0.3).Patients in the non-amnio group required salvage therapy more frequently than the amnio group,particularly after partial nerve-sparing RARP(6.3%vs.2.3%,p=0.001).Limitations are the absence of prospective randomization.Conclusion:The data suggest that using dHACM does not have a negative impact on BCR in patients.Outcomes of cancer specific and overall survival will require follow-up study to increase our understanding of these grafts’impact on prostate cancer biology.展开更多
Membrane technology has become the mainstream process for the production of electronic grade hydrogen peroxide(H_(2)O_(2)).But due to the oxidation degradation of the organic membranes(e.g.polyamide)by the strong oxid...Membrane technology has become the mainstream process for the production of electronic grade hydrogen peroxide(H_(2)O_(2)).But due to the oxidation degradation of the organic membranes(e.g.polyamide)by the strong oxidative radicals(e.g.OH)generated via the activation of H_(2)O_(2)by iron ions(Fe^(3+)),the short effective lifetime of membranes remains a challenge.Inorganic nano tin oxide(SnO_(2))has great potential for the removal of Fe^(3+)in strongly oxidative H_(2)O_(2)because of its ability to stabilize H2O_(2)and preferentially adsorb Fe^(3+).Herein,we have designed for the first time a flower-like robust SnO_(2)membrane on the ceramic support by in situ template-free one-step hydrothermal method.The three-dimensional loose pore structure in the membrane built by interlacing SnO_(2)nanosheets endows the SnO_(2)membrane with a high specific surface area and abundant adsorption sites(AOH).Based on the coordination complexation and electrostatic attraction between the SnO_(2)surface and Fe^(3+),the membrane shows a high Fe3+removal efficiency(83%)and permeability(24 L·m^(-2)·h^(-1)·MPa^(-1))in H_(2)O_(2).This study provides an innovative and simple approach to designing robust SnO_(2)membranes for highly efficient removal of Fe^(3+)in harsh environments,such as strong oxidation conditions.展开更多
Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell...Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell proliferation and differentiation,thereby exerting neuroprotective effects.However,the beneficial effects of endogenous VEGFA/b FGF are limited as their expression is only transiently increased.In this study,we generated multilayered nanofiber membranes loaded with VEGFA/b FGF using layer-by-layer self-assembly and electrospinning techniques.We found that a membrane containing 10 layers had an ideal ultrastructure and could efficiently and stably release growth factors for more than 1 month.This 10-layered nanofiber membrane promoted brain microvascular endothelial cell tube formation and proliferation,inhibited neuronal apoptosis,upregulated the expression of tight junction proteins,and improved the viability of various cellular components of neurovascular units under conditions of oxygen/glucose deprivation.Furthermore,this nanofiber membrane decreased the expression of Janus kinase-2/signal transducer and activator of transcription-3(JAK2/STAT3),Bax/Bcl-2,and cleaved caspase-3.Therefore,this nanofiber membrane exhibits a neuroprotective effect on oxygen/glucose-deprived neurovascular units by inhibiting the JAK2/STAT3 pathway.展开更多
In industry, ethylene(C_(2)H_(4))/propylene(C_(3)H_(6)) separations are usually performed by a cryogenic process,which is energy intensive. Membrane separation technology is an alternative separation process that save...In industry, ethylene(C_(2)H_(4))/propylene(C_(3)H_(6)) separations are usually performed by a cryogenic process,which is energy intensive. Membrane separation technology is an alternative separation process that saves energy and is efficient. In this study, blend membranes were prepared by doping polyethylene glycol(PEG600) into a poly(ether-block-amide)(Pebax^(■) 2533) matrix and were used to separate the C_(2)H_(4)/C_(3)H_(6) mixture. The PEG 600 and Pebax^(■) 2533 polymers have good compatibility because they share hydrogen bonds. The addition of PEG600 is conducive to the hydrophilicity and the free volume of blend membranes, and it is also conducive to the solubility of C_(2)H_(4) and C_(3)H_(6) in the membranes, which improves the ability of the membranes to separate this gas pair. The Pebax^(■) 2533/PEG600 blend membrane with 15%(mass) PEG600 showed the highest separation performance in our investigated membranes, with a C_(3)H_(6)/C_(2)H_(4) selectivity of 8.9 and a C_(3)H_(6) permeability of 196 barrer(1 barrer = 1.33×10^(14)m^(3)(STP)·m·m^(-2)·s^(-1)·kPa^(-1)) at 238 K and 0.2 MPa, which is higher than that of the Pebax^(■) 2533/NaY-6%(mass) membrane(α_(C_(3)H_(6)/C_(2)H_(4)) =6.5, P_(C_(3)H_(6))=211 barrer) reported in our previous work. It is confirmed that incorporating PEG600 into the Pebax^(■) 2533 matrix to fabricate blend membranes is an efficient strategy for separating light olefins.展开更多
Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of ...Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.展开更多
Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation d...Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.展开更多
High-quality standard oil synthetic zeolite-13(SSZ-13) membranes with thickness only ~ 1.0 μm were prepared on tubular supports by the new seeded-gel approach. Seeded-gel approach is simpler than the normal secondary...High-quality standard oil synthetic zeolite-13(SSZ-13) membranes with thickness only ~ 1.0 μm were prepared on tubular supports by the new seeded-gel approach. Seeded-gel approach is simpler than the normal secondary-growth one since adding seeds in the gel is simpler than seeding on the support surface. The synthesis time was greatly reduced from 3.0 to 1.0 d after synthesis modification of gel aging and seed sizes. Low temperature ozone calcination was used for the removal of the organic structural directing agent. The best SSZ-13 membrane displayed CO_(2)permeances of 1.3 × 10^(-6) and 1.5 × 10^(-6) mol·m^(-2)·s^(-1)·Pa^(-1) and CO_(2)/CH_(4) and CO_(2)/N_(2) selectivities of 125 and 27 for equimolar CO_(2)/CH_(4) and CO_(2)/N2mixtures at 0.2 MPa pressure drop and 298 K, respectively. Separation performance of the membrane in the two binary mixtures is higher than that of most zeolite membranes. Three SSZ-13 membranes were reproducibly prepared on tubular supports by seeded-gel approach and the standard deviation ratios of CO_(2) permeance and CO_(2)/CH_(4) selectivity are 12.5% and 7%, respectively. It suggests that this new synthesis approach is creditable. The effects of temperature and pressure on separation performance of the thin SSZ-13 membranes were studied in the two binary mixtures. The tubular SSZ-13 membranes displayed great potentials for CO_(2) capture from natural gas, biogas and flue gas.展开更多
The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar mem...The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar membranes with sub-nanometer wide channels are promising candidates for discerning OH^(-)and other anions.Here,we report the development of alkaline recycling membranes through stacking MoS_(2) nanosheets.Benefiting from the ordered and narrow 2D channels,MoS_(2) membranes show excellent alkaline recovery performances.The OH^(-)dialysis coefficient (U_(OH)-) and separation factor (S)towards simulated OH^(-) and WO_(4)^(2-) across the 500 nm thick MoS_(2) laminates reach 6.9×10^(-3)m·h^(-1)and 34.3 respectively.Furthermore,the chemical environments of MoS_(2) laminates were modulated by intercalating ionic poly(sodium 4-styrene sulfonate)(PSS@MoS_(2)).The U_(OH)-and S values of PSS@MoS_(2) membrane further improve to 11.7×10^(-3)m·h^(-1)and 49.8 respectively.Besides,both MoS_(2) and PSS@MoS_(2) membranes exhibit promising stability.展开更多
We report a universal method to transfer freestanding La_(0.7)Sr_(0.3)MnO_(3)membranes to target substrates.The 4-unit-cell-thick freestanding La_(0.7)Sr_(0.3)MnO_(3)membrane exhibits the enhanced ferromagnetism,condu...We report a universal method to transfer freestanding La_(0.7)Sr_(0.3)MnO_(3)membranes to target substrates.The 4-unit-cell-thick freestanding La_(0.7)Sr_(0.3)MnO_(3)membrane exhibits the enhanced ferromagnetism,conductivity and out-of-plane magnetic anisotropy,which otherwise shows nonmagnetic/antiferromagnetic and insulating behavior due to the intrinsic epitaxial strain.This work facilitates the promising applications of ultrathin freestanding correlated oxide membranes in electronics and spintronics.展开更多
3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,th...3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,the direct growth of 3D transition metal dichalcogenides architectures with high crystal quality and well-controlled size/thickness remains a huge challenge.Herein,we report a facile,highly-repeatable,and versatile chemical vapor deposition strategy,for the mass production of high-quality 3D-architecratured transition metal dichalcogenides(e.g.,MoS_(2),WS_(2),and ReS_(2))and their alloys(e.g.,W_(x)Mo(1–x)S_(2)and Rex Mo_((1–x))S_(2))nanosheets on naturally abundant and low-cost diatomite templates.Particularly,the purified transition metal dichalcogenides products exhibit unique and designable 3D biomorphic hierarchical microstructures,controllable layer thicknesses,tailorable chemical compositions,and good crystallinities.The weak interlayer interactions endow them with good dispersity in solutions to form stable additive-free inks for solution-processing-based applications,for example,high-permeable and high-stable separation membranes for water purification,and efficient electrocatalysts for hydrogen evolution reactions.This work paves ways for the low-cost,mass production of versatile transition metal dichalcogenides powder-like materials with designable structures and properties,toward energy/environmental-related applications and beyond.展开更多
Background: Respiratory distress syndrome (RDS) is a major cause of neonatal morbidity and mortality, affecting approximately 1% of all live births and 10% of all preterm infants. Lamellar bodies represent a storage f...Background: Respiratory distress syndrome (RDS) is a major cause of neonatal morbidity and mortality, affecting approximately 1% of all live births and 10% of all preterm infants. Lamellar bodies represent a storage form of pulmonary surfactant within Type II pneumocytes, secretion of which increases with advancing gestational age, thus enabling prediction of the degree of FLM. Preterm premature rupture of membranes (PPROM) complicates approximately 1/3 of all preterm births. Birth within 1 week is the most likely outcome for any patient with PPROM in the absence of adjunctive treatments. Respiratory distress has been reported to be the most common complication of preterm birth. Sepsis, intraventricular haemorrhage, and necrotizing enterocolitis also are associated with prematurity, but these are less common near to term. Objective: To assess the efficacy of the amniotic fluid lamellar body counting from a vaginal pool in predicting fetal lung maturity in women with preterm premature rupture of membranes. Methods: This study was conducted at Ain Shams University Maternity Hospital in the emergency ward from January 2019 to September 2019. It included 106 women with singleton pregnancies, gestational age from 28 - 36 weeks with preterm premature rupture of membranes. This study is designed to assess the efficacy of the amniotic fluid lamellar body counting (LBC) from a vaginal pool in predicting fetal lung maturity in women with preterm premature rupture of membranes. Results: The current study revealed a highly significant increase in the lamellar body count in cases giving birth to neonates without RDS compared to that cases giving birth to neonates with RDS. Also, no statistically significant difference between LBC and age, parity and number of previous miscarriages in the mother was found. Gestational age at delivery was significantly lower among cases with respiratory distress. Steroid administration was significantly less frequent among cases with respiratory distress. However, lamellar bodies had high diagnostic performance in the prediction of respiratory distress. Conclusion: Lamellar body count (LBC) is an effective, safe, easy, and cost-effective method to assess fetal lung maturity (FLM). It does not need a highly equipped laboratory or specially trained personnel, it just needs the conventional blood count analyzer. Measurement of LBC is now replacing the conventional Lecithin/Sphyngomyelin L/S ratio. LBC cut-off value of ≤42.5 × 10<sup>3</sup>/μL can be used safely to decide fetal lung maturity with sensitivity of 95.7% and specificity of 97.6%.展开更多
Hydrogen-bonded organic frameworks(HOFs)have emerged as a new class of crystalline porous materials,and their application in membrane technology needs to be explored.Herein,for the first time,we demonstrated the utili...Hydrogen-bonded organic frameworks(HOFs)have emerged as a new class of crystalline porous materials,and their application in membrane technology needs to be explored.Herein,for the first time,we demonstrated the utilization of HOF-based mixed-matrix membrane for CO_(2) separation.HOF-21,a unique metallo-hydrogen-bonded organic framework material,was designed and processed into nanofillers via amine modulator,uniformly dispersing with Pebax polymer.Featured with the mix-bonded framework,HOF-21 possessed moderate pore size of 0.35 nm and displayed excellent stability under humid feed gas.The chemical functions of multiple binding sites and continuous hydrogen-bonded network jointly facilitated the mass transport of CO_(2).The resulting HOF-21 mixed-matrix membrane exhibited a permeability above 750 Barrer,a selectivity of~40 for CO_(2)/CH_(4) and~60 for CO_(2)/N_(2),surpassing the 2008 Robeson upper bound.This work enlarges the family of mixed-matrix membranes and lays the foundation for HOF membrane development.展开更多
High-temperature proton exchange membrane fuel cells(HT-PEMFC) possess distinct technical advantages of high output power, simplified water/heat management, increased tolerance to fuel impurities and diverse fuel sour...High-temperature proton exchange membrane fuel cells(HT-PEMFC) possess distinct technical advantages of high output power, simplified water/heat management, increased tolerance to fuel impurities and diverse fuel sources, within the temperature range of 120–200 ℃. However, for practical automobile applications, it was crucial to broaden their low-temperature operating window and enable cold start-up capability. Herein, gel-state phosphoric acid(PA) doped sulfonated polybenzimidazole(PBI) proton exchange membranes(PEMs) were designed and synthesized via PPA sol-gel process and in-situ sultone ring-opening reactions with various proton transport pathways based on absorbed PA, flexible alkyl chain connected sulfonic acid groups and imidazole sites. The effects of flexible alkyl sulfonic acid side chain length and content on PA doping level, proton conductivity, and membrane stability under different temperature and relative humidity(RH) were thoroughly investigated. The prepared gel-state membranes contained a self-assembled lamellar and porous structure that facilitated the absorption of a large amount of PA with rapid proton transporting mechanisms. At room temperature, the optimized membrane exhibited a proton conductivity of 0.069 S cm^(-1), which was further increased to 0.162 and 0.358 S cm^(-1)at 80 and 200 ℃, respectively, without additional humidification. The most significant contribution of this work was demonstrating the feasibility of gel-state sulfonated PBI membranes in expanding HT-PEMFC application opportunities over a wider operating range of 25 to 240 ℃.展开更多
Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membra...Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber(PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H_(2) permeance of 8.7 × 10^(-8)mol·m^(-2)·s^(-1)·Pa^(-1) with a H_(2)/N_(2) ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.展开更多
基金Financial support by the Spanish Ministry of Science(PID2022139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AE I/10.13039/501100011033)with funding from Next Generation EU(PRTR-C17.I1)within the Planes Complementarios con CCAA(Area of Green Hydrogen and Energy)+2 种基金carried out in the CSIC Interdisciplinary Thematic Platform(PTI+)Transición Energética Sostenible+(PTI-TRANSENER+)the Universitat Politècnica de València(UPV)the support of the Servicio de Microscopía Elcectronica of the UPV。
文摘Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2)permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2)-δcatalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2)injection into the reaction can be easily fine-tuned.
基金the financial support from the National Natural Science Foundation of China(22078272&22278340)。
文摘Building well-developed ion-conductive highways is highly desirable for anion exchange membranes(AEMs).Grafting side chain is a highly effective approach for constructing a well-defined phaseseparated morphological structure and forming unblocked ion pathways in AEMs for fast ion transport.Fluorination of side chains can further enhance phase separation due to the superhydrophobic nature of fluorine groups.However,their electronic effect on the alkaline stability of side chains and membranes is rarely reported.Here,fluorine-containing and fluorine-free side chains are introduced into the polyaromatic backbone in proper configuration to investigate the impact of the fluorine terminal group on the stability of the side chains and membrane properties.The poly(binaphthyl-co-p-terphenyl piperidinium)AEM(QBNp TP)has the highest molecular weight and most dimensional stability due to its favorable backbone arrangement among ortho-and meta-terphenyl based AEMs.Importantly,by introducing both a fluorinated piperidinium side chain and a hexane chain into the p-terphenyl-based backbone,the prepared AEM(QBNp TP-QFC)presents an enhanced conductivity(150.6 m S cm^(-1))and a constrained swelling at 80℃.The electronic effect of fluorinated side chains is contemplated by experiments and simulations.The results demonstrate that the presence of strong electro-withdrawing fluorine groups weakens the electronic cloud of adjacent C atoms,increasing OH^(-)attack on the C atom and improving the stability of piperidinium cations.Hence QBNp TP-QFC possesses a robust alkaline stability at 80℃(95.3%conductivity retention after testing in 2 M Na OH for 2160 h).An excellent peak power density of 1.44 W cm^(-2)and a remarkable durability at 80℃(4.5%voltage loss after 100 h)can be observed.
基金supported by fund from the National Natural Science Foundation of China(32172322)。
文摘Elaidic acid(EA)stimulation can lead to endoplasmic reticulum stress(ERS),accompanied by a large release of Ca^(2+),and ultimately the activation of NLRP3 inflammasome in Kupffer cells(KCs).Mitochondrial instability or dysfunction may be the key stimulating factors to activate NLRP3 inflammasome,and sustained Ca^(2+)transfer can result in mitochondrial dysfunction.We focused on KCs to explore the damage to mitochondria by EA.After EA stimulation,cells produced an oxidative stress(OS)response with a significant increase in ROS release.Immunoprecipitation experiments and the addition of inhibitors revealed that the increase in the level of intracellular Ca^(2+)led to Ca^(2+)accumulation in the mitochondrial matrix via mitochondria-associated membranes(MAMs).This was accompanied by a significant release of m ROS,loss of MMP and ATP,and a significant increase in mitochondrial permeability transition pore opening,ultimately leading to mitochondrial instability.These findings confirmed the mechanism that EA induced mitochondrial Ca^(2+)imbalance in KCs via MAM,ultimately leading to mitochondrial dysfunction.Meanwhile,EA induced OS and the decrease of MMP and ATP in rat liver,and significant lesions were found in liver mitochondria.Swelling of the inner mitochondrial cristae and mitochondrial vacuolization occurred,with a marked increase in lipid droplets.
基金support from Sichuan Science and Technology Program(2021YFH0116)National Natural Science Foundation of China(No.52170112)DongFang Boiler Co.,Ltd.(3522015).
文摘Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,such as the presence of interfacial voids,hardening of polymer chains,and blockage of micropores by polymers between common MMMsfillers and the polymer matrix,currently limit the gas sep-aration performance of MMMs.Ternary phase MMMs(consisting of afiller,an additive,and a matrix)made by adding a third compound,usually functionalized additives,can overcome the structural problems of binary phase MMMs and positively impact membrane separation performance.This review introduces the structure and fabrication processes for ternary MMMs,categorizes various nanofillers and the third component,and summarizes and analyzes in detail the CO_(2) separation performance of newly developed ternary MMMs based on both rubbery and glassy polymers.Based on this separation data,the challenges of ternary MMMs are also discussed.Finally,future directions for ternary MMMs are proposed.
文摘Objective: The objective of this study was to determine if early rupture of membranes (ROM) in women undergoing induction of labor (IOL) at term is associated with an increased rate of clinical chorioamnionitis. Study Design: A retrospective cohort study was performed on women undergoing IOL. Early ROM was defined as ROM at a modified Bishop score less than 5, cervical dilation less than 4 cm, or cervical effacement less than 80%. The rate of clinical chorioamnionitis was compared between women with early and late ROM. Results: The rate of clinical chorioamnionitis was 8.6% (24/279). ROM at an effacement of less than 80% was associated with a rate of clinical chorioamnionitis of 15.4% (12/78) compared to 6.0% (12/201) at an effacement of equal to or greater than 80%, p = 0.017. The rate of cesarean delivery was higher for patients with early ROM by any definition: 32% compared to 17.5% by modified Bishop score (p = 0.031), 32.4% versus 18.2% by cervical dilation (p = 0.049), and 33.3% versus 14.9% by cervical effacement (p = 0.001). Conclusions: In patients undergoing IOL, early ROM may be associated with an increased rate of clinical chorioamnionitis when performed at a cervical effacement of less than 80% and an increased rate of cesarean delivery.
基金financially supported by National Key Research and Development Program of China (2022YFB3804903, 2022YFB3804900)the National Natural Science Foundation of China (No. 52273052)+2 种基金the Fundamental Research Funds for the Central Universities (No. 2232023Y01)the Program of Shanghai Academic/Technology Research Leader (No. 21XD1420100)the International Cooperation Fund of Science and Technology Commission of Shanghai Municipality (No. 21130750100)。
文摘Nanofiber membranes(NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a great challenge due to the enormous reflection and incredibly poor transmission generated by the nanofiber-air interface. In this research, we report a general strategy for the preparation of flexible temperature-responsive transparent(TRT) membranes,which achieves a rapid transformation of NFMs from opaque to highly transparent under a narrow temperature window. In this process, the phase change material eicosane is coated on the surface of the polyurethane nanofibers by electrospray technology. When the temperature rises to 37 ℃, eicosane rapidly completes the phase transition and establishes the light transmission path between the nanofibers, preventing light loss from reflection at the nanofiber-air interface. The resulting TRT membrane exhibits high transmittance(> 90%), and fast response(5 s). This study achieves the first TRT transition of NFMs, offering a general strategy for building highly transparent nanofiber materials, shaping the future of next-generation intelligent temperature monitoring, anti-counterfeiting measures, and other high-performance devices.
文摘Objective:Placement of human placenta derived grafts during robotic-assisted radical prostatectomy(RARP)hastens the return of continence and potency.The long-term impact on the oncologic outcomes remains to be investigated.Our objective was to determine the oncologic outcomes of patients with dehydrated human amnion chorion membrane(dHACM)at RARP compared to a matched cohort.Methods:In a referral centre,from August 2013 to October 2019,599 patients used dHACM in bilateral nerve-sparing RARP.We excluded patients with less than 12 months follow-up,simple prostatectomy,and unilateral nerve-sparing.Patients with dHACM(amnio group)were 529,and were propensity score matched 1:1 to 2465 patients without dHACM(non-amnio group)and a minimum follow-up of 36 months.At the time of RARP,dHACM was placed around the neurovascular bundle in the amnio group.Continuous and categorical variables in matched groups was tested by two-sample Kolmogorov-Smirnov test and Fisher's exact test respectively.Outcomes measured were biochemical recurrence(BCR),adjuvant and salvage therapy rates.Results:Propensity score matching resulted in two groups of 444 patients.Cumulative incidence functions for BCR did not show a difference between the groups(p=0.3).Patients in the non-amnio group required salvage therapy more frequently than the amnio group,particularly after partial nerve-sparing RARP(6.3%vs.2.3%,p=0.001).Limitations are the absence of prospective randomization.Conclusion:The data suggest that using dHACM does not have a negative impact on BCR in patients.Outcomes of cancer specific and overall survival will require follow-up study to increase our understanding of these grafts’impact on prostate cancer biology.
基金support from the National Key Research and Development Program(2021YFB3801303)the National Natural Science Foundation of China(21838005,21921006)+1 种基金the State Key Laboratory of Materials-Oriented Chemical Engineering(SKL-MCE-22A03)the Key Research and Development Program of Jiangsu Provincial Department of Science and Technology(BE2022033-3).
文摘Membrane technology has become the mainstream process for the production of electronic grade hydrogen peroxide(H_(2)O_(2)).But due to the oxidation degradation of the organic membranes(e.g.polyamide)by the strong oxidative radicals(e.g.OH)generated via the activation of H_(2)O_(2)by iron ions(Fe^(3+)),the short effective lifetime of membranes remains a challenge.Inorganic nano tin oxide(SnO_(2))has great potential for the removal of Fe^(3+)in strongly oxidative H_(2)O_(2)because of its ability to stabilize H2O_(2)and preferentially adsorb Fe^(3+).Herein,we have designed for the first time a flower-like robust SnO_(2)membrane on the ceramic support by in situ template-free one-step hydrothermal method.The three-dimensional loose pore structure in the membrane built by interlacing SnO_(2)nanosheets endows the SnO_(2)membrane with a high specific surface area and abundant adsorption sites(AOH).Based on the coordination complexation and electrostatic attraction between the SnO_(2)surface and Fe^(3+),the membrane shows a high Fe3+removal efficiency(83%)and permeability(24 L·m^(-2)·h^(-1)·MPa^(-1))in H_(2)O_(2).This study provides an innovative and simple approach to designing robust SnO_(2)membranes for highly efficient removal of Fe^(3+)in harsh environments,such as strong oxidation conditions.
基金supported by the National Natural Science Foundation of China,Nos.81974207(to JH),82001383(to DW)the Special Clinical Research Project of Health Profession of Shanghai Municipal Health Commission,No.20204Y0076(to DW)。
文摘Upregulation of vascular endothelial growth factor A/basic fibroblast growth factor(VEGFA/b FGF)expression in the penumbra of cerebral ischemia can increase vascular volume,reduce lesion volume,and enhance neural cell proliferation and differentiation,thereby exerting neuroprotective effects.However,the beneficial effects of endogenous VEGFA/b FGF are limited as their expression is only transiently increased.In this study,we generated multilayered nanofiber membranes loaded with VEGFA/b FGF using layer-by-layer self-assembly and electrospinning techniques.We found that a membrane containing 10 layers had an ideal ultrastructure and could efficiently and stably release growth factors for more than 1 month.This 10-layered nanofiber membrane promoted brain microvascular endothelial cell tube formation and proliferation,inhibited neuronal apoptosis,upregulated the expression of tight junction proteins,and improved the viability of various cellular components of neurovascular units under conditions of oxygen/glucose deprivation.Furthermore,this nanofiber membrane decreased the expression of Janus kinase-2/signal transducer and activator of transcription-3(JAK2/STAT3),Bax/Bcl-2,and cleaved caspase-3.Therefore,this nanofiber membrane exhibits a neuroprotective effect on oxygen/glucose-deprived neurovascular units by inhibiting the JAK2/STAT3 pathway.
基金the financial support of the National Key Research and Development Program of China (2020YFB0606405)the Basic Research Program of Shanxi Province (20210302123197)+2 种基金the Key Project of the National Natural Science Foundation of China (21336006)the Scientific Research Foundation for Returned Scholars of Ministry of Education (2017047)the Foundation of State Key Laboratory of Highefficiency Utilization of Coal and Green Chemical Engineering (2017-K15)。
文摘In industry, ethylene(C_(2)H_(4))/propylene(C_(3)H_(6)) separations are usually performed by a cryogenic process,which is energy intensive. Membrane separation technology is an alternative separation process that saves energy and is efficient. In this study, blend membranes were prepared by doping polyethylene glycol(PEG600) into a poly(ether-block-amide)(Pebax^(■) 2533) matrix and were used to separate the C_(2)H_(4)/C_(3)H_(6) mixture. The PEG 600 and Pebax^(■) 2533 polymers have good compatibility because they share hydrogen bonds. The addition of PEG600 is conducive to the hydrophilicity and the free volume of blend membranes, and it is also conducive to the solubility of C_(2)H_(4) and C_(3)H_(6) in the membranes, which improves the ability of the membranes to separate this gas pair. The Pebax^(■) 2533/PEG600 blend membrane with 15%(mass) PEG600 showed the highest separation performance in our investigated membranes, with a C_(3)H_(6)/C_(2)H_(4) selectivity of 8.9 and a C_(3)H_(6) permeability of 196 barrer(1 barrer = 1.33×10^(14)m^(3)(STP)·m·m^(-2)·s^(-1)·kPa^(-1)) at 238 K and 0.2 MPa, which is higher than that of the Pebax^(■) 2533/NaY-6%(mass) membrane(α_(C_(3)H_(6)/C_(2)H_(4)) =6.5, P_(C_(3)H_(6))=211 barrer) reported in our previous work. It is confirmed that incorporating PEG600 into the Pebax^(■) 2533 matrix to fabricate blend membranes is an efficient strategy for separating light olefins.
基金Financial support from the Science Fund for Creative Research Groups of the National Science Foundation of China (22021005)the National Natural Science Foundation of China (21776032)the Innovation Team of Dalian University of Technology (DUT2017TB01)。
文摘Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.
文摘Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.
基金Financial supports from the National Natural Science Foundation of China (21921006, 21938007 and 21576131)the open project of the State Key Laboratory of Materials-Oriented Chemical Engineering of China (KL21-04)。
文摘High-quality standard oil synthetic zeolite-13(SSZ-13) membranes with thickness only ~ 1.0 μm were prepared on tubular supports by the new seeded-gel approach. Seeded-gel approach is simpler than the normal secondary-growth one since adding seeds in the gel is simpler than seeding on the support surface. The synthesis time was greatly reduced from 3.0 to 1.0 d after synthesis modification of gel aging and seed sizes. Low temperature ozone calcination was used for the removal of the organic structural directing agent. The best SSZ-13 membrane displayed CO_(2)permeances of 1.3 × 10^(-6) and 1.5 × 10^(-6) mol·m^(-2)·s^(-1)·Pa^(-1) and CO_(2)/CH_(4) and CO_(2)/N_(2) selectivities of 125 and 27 for equimolar CO_(2)/CH_(4) and CO_(2)/N2mixtures at 0.2 MPa pressure drop and 298 K, respectively. Separation performance of the membrane in the two binary mixtures is higher than that of most zeolite membranes. Three SSZ-13 membranes were reproducibly prepared on tubular supports by seeded-gel approach and the standard deviation ratios of CO_(2) permeance and CO_(2)/CH_(4) selectivity are 12.5% and 7%, respectively. It suggests that this new synthesis approach is creditable. The effects of temperature and pressure on separation performance of the thin SSZ-13 membranes were studied in the two binary mixtures. The tubular SSZ-13 membranes displayed great potentials for CO_(2) capture from natural gas, biogas and flue gas.
基金partially supported by the National Key Research and Development Program of China (2022YFB3805102)the National Natural Science Foundation of China (22278105, 21978062)。
文摘The available alkaline recovery membranes are currently dominated by polymeric materials,but they suffer from a permeation-selectivity trade-off and inferior chemical resistance.Robust two dimensional(2D) lamellar membranes with sub-nanometer wide channels are promising candidates for discerning OH^(-)and other anions.Here,we report the development of alkaline recycling membranes through stacking MoS_(2) nanosheets.Benefiting from the ordered and narrow 2D channels,MoS_(2) membranes show excellent alkaline recovery performances.The OH^(-)dialysis coefficient (U_(OH)-) and separation factor (S)towards simulated OH^(-) and WO_(4)^(2-) across the 500 nm thick MoS_(2) laminates reach 6.9×10^(-3)m·h^(-1)and 34.3 respectively.Furthermore,the chemical environments of MoS_(2) laminates were modulated by intercalating ionic poly(sodium 4-styrene sulfonate)(PSS@MoS_(2)).The U_(OH)-and S values of PSS@MoS_(2) membrane further improve to 11.7×10^(-3)m·h^(-1)and 49.8 respectively.Besides,both MoS_(2) and PSS@MoS_(2) membranes exhibit promising stability.
基金supported in part by the National Key R&D Program of China(Grant No.2022YFA1402404)the National Natural Science Foundation of China(Grant Nos.62274085,11874203,and 61822403)。
文摘We report a universal method to transfer freestanding La_(0.7)Sr_(0.3)MnO_(3)membranes to target substrates.The 4-unit-cell-thick freestanding La_(0.7)Sr_(0.3)MnO_(3)membrane exhibits the enhanced ferromagnetism,conductivity and out-of-plane magnetic anisotropy,which otherwise shows nonmagnetic/antiferromagnetic and insulating behavior due to the intrinsic epitaxial strain.This work facilitates the promising applications of ultrathin freestanding correlated oxide membranes in electronics and spintronics.
基金supported by the National Natural Science Foundation of China(Nos.52021006,51925201,51991344,51991340)the National Key Research and Development Program of China(No.2018YFA0703700)+1 种基金the Beijing Natural Science Foundation(No.2192021)the China Postdoctoral Science Foundation(No.2021M690195).
文摘3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,the direct growth of 3D transition metal dichalcogenides architectures with high crystal quality and well-controlled size/thickness remains a huge challenge.Herein,we report a facile,highly-repeatable,and versatile chemical vapor deposition strategy,for the mass production of high-quality 3D-architecratured transition metal dichalcogenides(e.g.,MoS_(2),WS_(2),and ReS_(2))and their alloys(e.g.,W_(x)Mo(1–x)S_(2)and Rex Mo_((1–x))S_(2))nanosheets on naturally abundant and low-cost diatomite templates.Particularly,the purified transition metal dichalcogenides products exhibit unique and designable 3D biomorphic hierarchical microstructures,controllable layer thicknesses,tailorable chemical compositions,and good crystallinities.The weak interlayer interactions endow them with good dispersity in solutions to form stable additive-free inks for solution-processing-based applications,for example,high-permeable and high-stable separation membranes for water purification,and efficient electrocatalysts for hydrogen evolution reactions.This work paves ways for the low-cost,mass production of versatile transition metal dichalcogenides powder-like materials with designable structures and properties,toward energy/environmental-related applications and beyond.
文摘Background: Respiratory distress syndrome (RDS) is a major cause of neonatal morbidity and mortality, affecting approximately 1% of all live births and 10% of all preterm infants. Lamellar bodies represent a storage form of pulmonary surfactant within Type II pneumocytes, secretion of which increases with advancing gestational age, thus enabling prediction of the degree of FLM. Preterm premature rupture of membranes (PPROM) complicates approximately 1/3 of all preterm births. Birth within 1 week is the most likely outcome for any patient with PPROM in the absence of adjunctive treatments. Respiratory distress has been reported to be the most common complication of preterm birth. Sepsis, intraventricular haemorrhage, and necrotizing enterocolitis also are associated with prematurity, but these are less common near to term. Objective: To assess the efficacy of the amniotic fluid lamellar body counting from a vaginal pool in predicting fetal lung maturity in women with preterm premature rupture of membranes. Methods: This study was conducted at Ain Shams University Maternity Hospital in the emergency ward from January 2019 to September 2019. It included 106 women with singleton pregnancies, gestational age from 28 - 36 weeks with preterm premature rupture of membranes. This study is designed to assess the efficacy of the amniotic fluid lamellar body counting (LBC) from a vaginal pool in predicting fetal lung maturity in women with preterm premature rupture of membranes. Results: The current study revealed a highly significant increase in the lamellar body count in cases giving birth to neonates without RDS compared to that cases giving birth to neonates with RDS. Also, no statistically significant difference between LBC and age, parity and number of previous miscarriages in the mother was found. Gestational age at delivery was significantly lower among cases with respiratory distress. Steroid administration was significantly less frequent among cases with respiratory distress. However, lamellar bodies had high diagnostic performance in the prediction of respiratory distress. Conclusion: Lamellar body count (LBC) is an effective, safe, easy, and cost-effective method to assess fetal lung maturity (FLM). It does not need a highly equipped laboratory or specially trained personnel, it just needs the conventional blood count analyzer. Measurement of LBC is now replacing the conventional Lecithin/Sphyngomyelin L/S ratio. LBC cut-off value of ≤42.5 × 10<sup>3</sup>/μL can be used safely to decide fetal lung maturity with sensitivity of 95.7% and specificity of 97.6%.
基金support from National Key Research and Development Program of China(No.2021YFB3802200)National Natural Science Foundation of China(No.U20B2023,22208238,U1732120)+1 种基金the Haihe Laboratory of Sustainable Chemical TransformationsNingbo Natural Science Foundation(No.2021J004).
文摘Hydrogen-bonded organic frameworks(HOFs)have emerged as a new class of crystalline porous materials,and their application in membrane technology needs to be explored.Herein,for the first time,we demonstrated the utilization of HOF-based mixed-matrix membrane for CO_(2) separation.HOF-21,a unique metallo-hydrogen-bonded organic framework material,was designed and processed into nanofillers via amine modulator,uniformly dispersing with Pebax polymer.Featured with the mix-bonded framework,HOF-21 possessed moderate pore size of 0.35 nm and displayed excellent stability under humid feed gas.The chemical functions of multiple binding sites and continuous hydrogen-bonded network jointly facilitated the mass transport of CO_(2).The resulting HOF-21 mixed-matrix membrane exhibited a permeability above 750 Barrer,a selectivity of~40 for CO_(2)/CH_(4) and~60 for CO_(2)/N_(2),surpassing the 2008 Robeson upper bound.This work enlarges the family of mixed-matrix membranes and lays the foundation for HOF membrane development.
基金supported by the National Natural Science Foundation of China (NSFC-22209147)。
文摘High-temperature proton exchange membrane fuel cells(HT-PEMFC) possess distinct technical advantages of high output power, simplified water/heat management, increased tolerance to fuel impurities and diverse fuel sources, within the temperature range of 120–200 ℃. However, for practical automobile applications, it was crucial to broaden their low-temperature operating window and enable cold start-up capability. Herein, gel-state phosphoric acid(PA) doped sulfonated polybenzimidazole(PBI) proton exchange membranes(PEMs) were designed and synthesized via PPA sol-gel process and in-situ sultone ring-opening reactions with various proton transport pathways based on absorbed PA, flexible alkyl chain connected sulfonic acid groups and imidazole sites. The effects of flexible alkyl sulfonic acid side chain length and content on PA doping level, proton conductivity, and membrane stability under different temperature and relative humidity(RH) were thoroughly investigated. The prepared gel-state membranes contained a self-assembled lamellar and porous structure that facilitated the absorption of a large amount of PA with rapid proton transporting mechanisms. At room temperature, the optimized membrane exhibited a proton conductivity of 0.069 S cm^(-1), which was further increased to 0.162 and 0.358 S cm^(-1)at 80 and 200 ℃, respectively, without additional humidification. The most significant contribution of this work was demonstrating the feasibility of gel-state sulfonated PBI membranes in expanding HT-PEMFC application opportunities over a wider operating range of 25 to 240 ℃.
基金supported by the National Natural Science Foundation of China (21978253)the Fundamental Research Funds for the Central Universities (226-2022-00020, 226-2022-00055)。
文摘Compared to inorganic supports, polymeric supports can offer additional benefits, e.g., easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks(ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber(PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H_(2) permeance of 8.7 × 10^(-8)mol·m^(-2)·s^(-1)·Pa^(-1) with a H_(2)/N_(2) ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.
