Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mec...Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mechanical strength, unique surface characteristics, and improved adherence that is transmitted into the polymer matrix to form a nanocomposite with improved properties. Polymethyl methacrylate is a common carbon source for the synthesis of carbon nanofibres of its high mechanical strength, thermal stability, and low moisture and water absorbing capacity that allows its products to have several applications. In this work, we report the successful electrospinning of carbon nanofibres from Poly methyl methacrylate and functionalizing the resulting carbon nanofibres. The functionalized carbon nanofibres were analyzed to determine their solubility/dispersion in selected organic solvents, then characterized using Fourier transform infra-red spectroscopy, Raman spectroscopy, scanning electron microscopy combined with Energy dispersive spectroscopy and Thermalgravimetric analysis.展开更多
A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The sa...A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.展开更多
Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylen...Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.展开更多
Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive...Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.展开更多
Prosthetic joint infection(PJI)is the most serious complication following total joint arthroplasty,this being because it is associated with,among other things,high morbidity and low quality of life,is difficult to pre...Prosthetic joint infection(PJI)is the most serious complication following total joint arthroplasty,this being because it is associated with,among other things,high morbidity and low quality of life,is difficult to prevent,and is very challenging to treat/manage.The many shortcomings of antibiotic-loaded poly(methyl methacrylate)(PMMA)bone cement(ALBC)as an agent for preventing and treating/managing PJI are well-known.One is that microorganisms responsible for most PJI cases,such as methicillin-resistant S.aureus,have developed or are developing resistance to gentamicin sulfate,which is the antibiotic in the vast majority of approved ALBC brands.This has led to many research efforts to develop cements that do not contain gentamicin(or,for that matter,any antibiotic)but demonstrate excellent antimicrobial efficacy.There is a sizeable body of literature on these socalled“antibiotic-free antimicrobial”PMMA bone cements(AFAMBCs).The present work is a comprehensive and critical review of this body.In addition to summaries of key trends in results of characterization studies of AFAMBCs,the attractive features and shortcomings of the literature are highlighted.Shortcomings provide motivation for future work,with some ideas being formulation of a new generation of AFAMBCs by,example,adding a nanostructured material and/or an extract from a natural product to the powder and/or liquid of the basis cement,respectively.展开更多
Two new chiral ionic liquids, 1 -((-)-menthoxycarbonylmethylene)-3-methylimidazolium hexafluorophosphateand 1-((-)-menthoxycarbonylmethylene)-3-hexadecylimidazolium hexafluorophosphate, were designed an d prepared. Th...Two new chiral ionic liquids, 1 -((-)-menthoxycarbonylmethylene)-3-methylimidazolium hexafluorophosphateand 1-((-)-menthoxycarbonylmethylene)-3-hexadecylimidazolium hexafluorophosphate, were designed an d prepared. Theirchemical structures were characterized by ~1H-NMR. Reverse atom transfer radical polymerization of methyl methacrylate(MMA) in these two ionic liquids was carried out using AIBN/CuCl_2/bipy as the initiating system. The resultant well-definedpolymethyl methacrylate (PMMA) was employed as a macroinitiator to induce the atom transfer radical polymerization ofmenthyl methacrylate (MnMA) in chlorobenzene, which yielded a PMMA-b-PMnMA diblock copolymer with narrow polydispersity.展开更多
With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by prep...With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by preparation of polymer blends gives rise to new materials with tailored properties. More complex, three-component systems, obtained by the addition of polymeric modifier to polymer filled composites may be of interest. Use of Fly ash cenospheres is very attractive because it is inexpensive and its use can reduce the environmental pollution to a significant extent. In the present study, Poly (Methyl Methacrylate) (PMMA)-Fly ash cenospheres composites were prepared using extrusion followed by Injection molding. The effect of matrix modification with Methyl methacrylate– acrylonitrile -butadiene–styrene (MABS) on the performance of PMMA- Fly ash cenospheres compositions was also, studied. It was found that with the addition of Fly ash cenospheres particulate as filler in PMMA showed marginal reduction in Tensile Strength, % Elongation and Impact strength and improvement in Flexural Strength, Heat Deflection Temperature and Vicat Softening Point. Compared with PMMA-cenospheres composites, the notched Impact Strength of the PMMA/MABS/cenospheres composites showed marginal enhancement in values at higher loading of cenospheres. The optimum performances in mechanical and thermal properties were obtained when the ratio of MABS to cenospheres was 1:2.展开更多
The substituted indenyl lanthanide(Ⅱ) complexes as single component catalyzed for the copolymerization of dimethylaminoethyl methacrylate and methyl methacrylate were studied. The results indicate that these complexe...The substituted indenyl lanthanide(Ⅱ) complexes as single component catalyzed for the copolymerization of dimethylaminoethyl methacrylate and methyl methacrylate were studied. The results indicate that these complexes all show good catalytic activity and the catalytic activity is affected by the temperature and time of polymerization, amount of catalyast and the solvent as well. The yields of the copolymerization are not affected by the ratio of monomers at all. In order of catalytic activity of the substituted indenyl lanthanide(Ⅱ) complexes: (C_5H_9C_9H_6)_2Sm(THF)>(C_2H_5C_9H_6)_2Sm(THF)_2>(C_5H_9C_9H_6)_2Yb(THF)_2>KSm(C_5H_9C_9H_6)_3(THF)_3>(PhCH_2C_9H_6)_2Sm(THF)_2. The reactivity ratio of the copolymerization of dimethylaminoethyl methacrylate and methyl methacrylate catalyzed by the substituted indenyl lanthanide (Ⅱ) complex (C_5H_9C_9H_6)_2Yb(THF)_2 (r_1=0.98, r_2=0.71) were measured.展开更多
The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reve...The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reversible addition fragmentation chain transfer(RAFT) polymerization method. PTBCHNB was characterized by FTIR, 1HNMR, GPC and DSC. After UV irradiation, the o-nitrobenzyl groups of PTBCHNB were photocleaved and the resulting carboxyl groups were highly alkali soluble, and PTBCHNB was converted to PCHIBMA bearing carboxyl groups. So, the matrix polymer could be etched by mild alkali solution with no requirements of photoacid generators and other diverse additives. The photocleavable behaviors of PTBCHNB were determined by FTIR, 1H NMR and TGA analysis. The resist formulated with PTBCHNB and cast in THF solution showed square pattern of 10 μm×10 μm using a mercury-xenon lamp in a contact printing mode and tetramethyl-ammonium hydroxide aqueous solution as a developer.展开更多
Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl ...Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl methacrylate) (PMMA)/nano-CaCO3 composite. The reaction between nano-CaCO3 and MPTMS, and the grafting of PMMA onto nano-CaCO3 were confirmed by infrared spectrum. The grafting ratio and grafting efficiency of PMMA on nano-CaCO3 modified with MPTMS were much higher than that on nano-CaCO3 modified with stearic acid. The grafting ratio of PMMA increased as the weight ratio between MMA and nano-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that nano-CaCO3 covered with PMMA was formed by in-situ emulsion polymerization.展开更多
Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization...Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.展开更多
Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia load...Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity.展开更多
Antibacterial adhesives are promising to inhibit biofilms and secondary caries. The objectives of this study were to synthesize and incorporate quaternary ammonium methacrylates into adhesives, and investigate the alk...Antibacterial adhesives are promising to inhibit biofilms and secondary caries. The objectives of this study were to synthesize and incorporate quaternary ammonium methacrylates into adhesives, and investigate the alkyl chain length effects on three-dimensional biofilms adherent on adhesives for the first time. Six quaternary ammonium methacrylates with chain lengths of 3, 6, 9, 12, 16 and 18 were synthesized and incorporated into Scotchbond Multi-Purpose. Streptococcus mutans bacteria were cultured on resin to form biofilms. Confocal laser scanning microscopy was used to measure biofilm thickness, live/dead volumes and live-bacteria percentage vs. distance from resin surface. Biofilm thickness was the greatest for Scotchbond control; it decreased with increasing chain length, reaching a minimum at chain length 16. Live-biofilm volume had a similar trend. Dead-biofilm volume increased with increasing chain length. The adhesive with chain length 9 had 37% live bacteria near resin surface, but close to 100% live bacteria in the biofilm top section. For chain length 16, there were nearly 0% live bacteria throughout the three-dimensional biofilm. In conclusion, strong antibacterial activity was achieved by adding quaternary ammonium into adhesive, with biofilm thickness and live-biofilm volume decreasing as chain length was increased from 3 to 16. Antibacterial adhesives typically only inhibited bacteria close to its surface; however, adhesive with chain length 16 had mostly dead bacteria in the entire three-dimensional biofilm. Antibacterial adhesive with chain length 16 is promising to inhibit biofilms at the margins and combat secondary caries.展开更多
Objective To evaluate the genotoxic and nongenotoxic effects of short-term exposure to glycidyl mathacrylate (GMA) on human lung fibroblast cells (2BS cells) in vitro. Methods DNA strand breakage was determined by sin...Objective To evaluate the genotoxic and nongenotoxic effects of short-term exposure to glycidyl mathacrylate (GMA) on human lung fibroblast cells (2BS cells) in vitro. Methods DNA strand breakage was determined by single cell gel electrophoresis, and DNA ladder formation assay and flow cytometric analysis were carried out to detect apoptic responses of cells to GMA exposure. The HPRT gene mutation assay was used to evaluate the mutagenicity, and the effect of GMA on gap junctional intercellular communication (GJIC) in the exposed cells was examined with the scrape loading/dye transfer technique. The ability of GMA to transform 2BS cells was also tested by an in vitro cell transformation assay. Results Exposure to GMA resulted in a dose-dependent increase in DNA strand breaks but not apoptic responses. GMA was also shown to significantly induce HPRT gene mutations and morphological transformation in 2BS cells in vitro. In contrast, GMA produced a concentration-dependent inhibition of GJIC. Conclusions GMA elicits both genotoxic and nongenotoxic effects on 2BS cells in vitro. The induction of DNA damage and gene mutations and inhibition of GJIC by GMA may casually contribute to GMA-induced cell transformation.展开更多
Poly （ethyleneglycol monomethylether） methacrylate （PEGMM）was synthesized by means of the reaction of methacrylyl chloride with sodium monomethylpolyethyleneglycoxide and was characterized by FTIR,;H-NMR,and ultra...Poly （ethyleneglycol monomethylether） methacrylate （PEGMM）was synthesized by means of the reaction of methacrylyl chloride with sodium monomethylpolyethyleneglycoxide and was characterized by FTIR,;H-NMR,and ultraviolet spectrometries. A series of poly （vinyl alcohol）-graft-PEGMM （PVA-g-PEGMM ）and methyl methacrylate-PEGMM copolymer （PMMA-PEGMM） were prepared and tested for antithrombogenicity in vitro. The results indicate that the antithrombogenicity of the copolymers basically increases with the increasing of the DP of polyoxyethylene （POE） chain and tends to a plateau after the DP around 114,i.e. the long chain structure of POE is favourable to the antithrombogenicityof its copolymers ;moreover, the extent of the improvement ofantithrombogenicity also relates to the PEGMM content of the copolymers and the kind of the matrix that the POE chains are located on. These results are consistent with the anticipation of the hypothesis of maintaining proteins normal conformations for blood compatible bioraaterials.展开更多
Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans ...Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans impregnated into dentin blocks for the first time, and （2） compare the antibacterial efficacy of DMADDM with a previous quaternary ammonium dimethacrylate （QADM）. Scotchbond Multi-Purpose （SBMP） bonding agent was used. DMADDM and QADM were mixed into SBMP primer. Six primers were tested： SBMP control primer P, P＋2.5% DMADDM, P＋5% DMADDM, P＋7.5% DMADDM, P＋10% DMADDM, and P＋10% QADM. S. mutans were impregnated into human dentin blocks, and each primer was applied to dentin to test its ability to kill bacteria in dentinal tubules. Bacteria in dentin were collected via a sonication method, and the colony-forming units （CFU） and inhibition zones were measured. The bacterial inhibition zone of P＋10% DMADDM was 10 times that of control primer （P〈0.05）. CFU in dentin with P＋10% DMADDM was reduced by three orders of magnitude, compared with control. DMADDM had a much stronger antibacterial effect than QADM, and antibacterial efficacy increased with increasing DMADDM concentration. Dentin shear bond strengths were similar among all groups （P〉0.1）. In conclusion, antibacterial DMADDM-containing primer was validated to kill bacteria inside dentin blocks, possessing a much stronger antibacterial potency than the previous QADM. DMADDM-containing bonding agent was effective in eradicating bacteria in dentin, and its efficacy was directly proportional to DMADDM mass fraction. Therefore, DMADDM may be promisine for use in bonding agents as well as in other restorative and oreventive materials to inhibit bacteria.展开更多
To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting s...To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting system,the thermal behavior of obtained green body,and the microstructures and mechanical properties of the sintered bodies were investigated by rheometer,TG-DSC,SEM and bending strength testing,respectively.The results show that,(1)10 mg/mL of the initiator(benzoyl peroxide)is the optimal amount for polymerization of this gelscasting system at 25 ℃;(2)The alumina suspension of the HEMA-TBA gelcasting system showing shear-thinning behavior is sufficiently low for gelcasting process;(3)The bending strength of porous alumina ceramic samples,whose porosities range from 42% to 56%,is from(8±0.5)to(91±4.5)MPa.展开更多
Synthesis and characterization of the copolymers （PAG） of α-methyl styrene （AMS） and glycidyl methacrylate （GMA） are presented. The copolymers of PAG were characterized by gel permeation chromatography （GPC）,...Synthesis and characterization of the copolymers （PAG） of α-methyl styrene （AMS） and glycidyl methacrylate （GMA） are presented. The copolymers of PAG were characterized by gel permeation chromatography （GPC）, Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （^1H-NMR） and thermogravimetery （TG）. Based on the copolymer compositions determined by ^1H-NMR, the reactivity ratios of AMS and GMA were found to be 0.105 ± 0.012 and 0.883 ± 0.046 respectively by Kelen-Tudos method. TG revealed that thermal stability of the copolymers decreased with increasing the AMS content in the copolymers, which indicated that the degradation was mainly caused by the chain scission of AMS-containing structures. Under heating, the copolymers depolymerize at their weak bonds and form chain radicals, which could further initiate other chemical reactions.展开更多
Atom transfer radical polymerization （ATRP） of methyl methacrylate （MMA） employing ethyl 2-bromoisobutyrate （EBiB）/ CuBr as the initiating system was investigated at 50 ℃ in the absence of any additional ligand...Atom transfer radical polymerization （ATRP） of methyl methacrylate （MMA） employing ethyl 2-bromoisobutyrate （EBiB）/ CuBr as the initiating system was investigated at 50 ℃ in the absence of any additional ligand in the three room temperature ionic liquids （RTILs）, 1-methyl-imidazolium acetate （[mim][CH3COO]）, 1-methylimidazolium propionate （[mim][CH3CH2COO]） and 1-methylimidazolium butyrate （[mim][CH3CH2CH2COO]）, respectively. All the polymerization in the three RTILs proceeded in a well-controlled manner. The sequence of the apparent polymerization rate constants was kapp（[mim][CH3COO]） 〉 kapp（[mim] [CH3CH2COO]） 〉 kapp （[mim][CH3CH2CH2COO]）.展开更多
Poly methyl methacrylate(PMMA)bone cement is used in augmenting and stabilizing fractured vertebral bodies through percutaneous vertebroplasty(PVP)and percutaneous kyphoplasty(PKP).However,applications of PMMA bone ce...Poly methyl methacrylate(PMMA)bone cement is used in augmenting and stabilizing fractured vertebral bodies through percutaneous vertebroplasty(PVP)and percutaneous kyphoplasty(PKP).However,applications of PMMA bone cement are limited by the high elasticity modulus of PMMA,its low biodegradability,and its limited ability to regenerate bone.To improve PMMA bio activity and biodegradability and to modify its elasticity modulus,we mixed PMMA bone cement with oxidized hyaluronic acid and carboxymethyl chitosan in situ cross-linking hydrogel loaded with bone morphogenetic protein-2(BMP-2)to achieve novel hybrid cement.These fabric ated PMMA-hydrogel hybrid cements exhibited lower setting temperatures,a lower elasticity modulus,and better biodegradability and biocompatibility than that of pure PMMA cement,while retaining acceptable setting times,mechanical strength,and inj ectability.In addition,we detected release of BMP-2 from the PMMA-hydrogel hybrid cements,significantly enhancing in vitro osteogenesis of bone marrow mesenchymal stem cells by up-regulating the gene expression of Runx2,Coll,and OPN.Use of PMMA-hydrogel hybrid cements loaded with BMP-2 on rabbit femoral condyle bone-defect models revealed their biodegradability and enhanced bone formation.Our study demonstrated the favorable mechanical properties,biocompatibility,and biodegradability of fabricated PMMA-hydrogel hybrid cements loaded with BMP-2,as well as their ability to improve osteogenesis,making them a promising material for use in PKP and PVP.展开更多
文摘Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mechanical strength, unique surface characteristics, and improved adherence that is transmitted into the polymer matrix to form a nanocomposite with improved properties. Polymethyl methacrylate is a common carbon source for the synthesis of carbon nanofibres of its high mechanical strength, thermal stability, and low moisture and water absorbing capacity that allows its products to have several applications. In this work, we report the successful electrospinning of carbon nanofibres from Poly methyl methacrylate and functionalizing the resulting carbon nanofibres. The functionalized carbon nanofibres were analyzed to determine their solubility/dispersion in selected organic solvents, then characterized using Fourier transform infra-red spectroscopy, Raman spectroscopy, scanning electron microscopy combined with Energy dispersive spectroscopy and Thermalgravimetric analysis.
文摘A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.
基金Fujian External Cooperation project of Natural Science Foundation,China(No.2022I0042)。
文摘Thermo-responsive random copolymers,poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-(ethylene glycol)methyl ether methacrylate)(P(EO_(2)-co-EO_(4/5)))and poly(2-(2-methoxyethoxy)ethoxyethyl methacrylate-co-ethylene glycol methacrylate(P(EO2-co-EG4/5))are synthesized via atom transfer radical polymerization(ATRP).The successful synthesis and the narrow polydispersity index(PDI)of two copolymers are indicated by 1H nuclear magnetic resonance(1H-NMR)and gel permeation chromatography(GPC)analyses.The transition behaviors of polymers in the aqueous solution are demonstrated by changes in turbidity and particle sizes.The transition behavior of P(EO2-co-EG4/5)is found to be milder than that of P(EO2-co-EO4/5).Moreover,the presence of hydrogen bonds without thermo-responsive properties established by hydroxyl groups in the end-side chain of P(EO_(2)-co-EG_(4/5))hinders the dehydration at the transition temperature(TT).Attenuated total reflection Fourier transform infrared spectrometry(ATR-FTIR)analysis along with contact angle measurements reveals that both P(EO_(2)-co-EO_(4/5))and P(EO_(2)-co-EG_(4/5))films undergo phase transitions from hydrophilicity to hydrophobicity above TT.By examining the swelling and collapse behaviors of the polymer films during phase transitions,it can be concluded that the end hydroxyl groups may establish hydrogen bonds with neighboring ether groups within the films,which remain intact throughout the phase transition process due to their strong bonding interactions.This leads to an increase in steric hindrance within swollen films thereby impeding dehydration processes and inducing hysteresis during phase transitions.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(Grant No.51925403)Major Research plan of the National Natural Science Foundation of China(Grant No.91934302)+2 种基金the National Science Foundation of China(21676052,21606042)Independent Innovation Fund of Tianjin University(2023XJD0050)Funding for National Key R&D Program of China(2022YFB3808800).
文摘Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.
文摘Prosthetic joint infection(PJI)is the most serious complication following total joint arthroplasty,this being because it is associated with,among other things,high morbidity and low quality of life,is difficult to prevent,and is very challenging to treat/manage.The many shortcomings of antibiotic-loaded poly(methyl methacrylate)(PMMA)bone cement(ALBC)as an agent for preventing and treating/managing PJI are well-known.One is that microorganisms responsible for most PJI cases,such as methicillin-resistant S.aureus,have developed or are developing resistance to gentamicin sulfate,which is the antibiotic in the vast majority of approved ALBC brands.This has led to many research efforts to develop cements that do not contain gentamicin(or,for that matter,any antibiotic)but demonstrate excellent antimicrobial efficacy.There is a sizeable body of literature on these socalled“antibiotic-free antimicrobial”PMMA bone cements(AFAMBCs).The present work is a comprehensive and critical review of this body.In addition to summaries of key trends in results of characterization studies of AFAMBCs,the attractive features and shortcomings of the literature are highlighted.Shortcomings provide motivation for future work,with some ideas being formulation of a new generation of AFAMBCs by,example,adding a nanostructured material and/or an extract from a natural product to the powder and/or liquid of the basis cement,respectively.
基金This work was supported by the National Natural Science Foundation of China (Grants 20174001, 29992590-4) and the Ministry of Education of China for the teaching and research award fund for outstanding young teacher in higher education institutions.
文摘Two new chiral ionic liquids, 1 -((-)-menthoxycarbonylmethylene)-3-methylimidazolium hexafluorophosphateand 1-((-)-menthoxycarbonylmethylene)-3-hexadecylimidazolium hexafluorophosphate, were designed an d prepared. Theirchemical structures were characterized by ~1H-NMR. Reverse atom transfer radical polymerization of methyl methacrylate(MMA) in these two ionic liquids was carried out using AIBN/CuCl_2/bipy as the initiating system. The resultant well-definedpolymethyl methacrylate (PMMA) was employed as a macroinitiator to induce the atom transfer radical polymerization ofmenthyl methacrylate (MnMA) in chlorobenzene, which yielded a PMMA-b-PMnMA diblock copolymer with narrow polydispersity.
文摘With the advent of plastics and the wide range of fillers that are available have made modifications as precise as the tailored resins themselves. To modify the properties of polymer either by using fillers or by preparation of polymer blends gives rise to new materials with tailored properties. More complex, three-component systems, obtained by the addition of polymeric modifier to polymer filled composites may be of interest. Use of Fly ash cenospheres is very attractive because it is inexpensive and its use can reduce the environmental pollution to a significant extent. In the present study, Poly (Methyl Methacrylate) (PMMA)-Fly ash cenospheres composites were prepared using extrusion followed by Injection molding. The effect of matrix modification with Methyl methacrylate– acrylonitrile -butadiene–styrene (MABS) on the performance of PMMA- Fly ash cenospheres compositions was also, studied. It was found that with the addition of Fly ash cenospheres particulate as filler in PMMA showed marginal reduction in Tensile Strength, % Elongation and Impact strength and improvement in Flexural Strength, Heat Deflection Temperature and Vicat Softening Point. Compared with PMMA-cenospheres composites, the notched Impact Strength of the PMMA/MABS/cenospheres composites showed marginal enhancement in values at higher loading of cenospheres. The optimum performances in mechanical and thermal properties were obtained when the ratio of MABS to cenospheres was 1:2.
文摘The substituted indenyl lanthanide(Ⅱ) complexes as single component catalyzed for the copolymerization of dimethylaminoethyl methacrylate and methyl methacrylate were studied. The results indicate that these complexes all show good catalytic activity and the catalytic activity is affected by the temperature and time of polymerization, amount of catalyast and the solvent as well. The yields of the copolymerization are not affected by the ratio of monomers at all. In order of catalytic activity of the substituted indenyl lanthanide(Ⅱ) complexes: (C_5H_9C_9H_6)_2Sm(THF)>(C_2H_5C_9H_6)_2Sm(THF)_2>(C_5H_9C_9H_6)_2Yb(THF)_2>KSm(C_5H_9C_9H_6)_3(THF)_3>(PhCH_2C_9H_6)_2Sm(THF)_2. The reactivity ratio of the copolymerization of dimethylaminoethyl methacrylate and methyl methacrylate catalyzed by the substituted indenyl lanthanide (Ⅱ) complex (C_5H_9C_9H_6)_2Yb(THF)_2 (r_1=0.98, r_2=0.71) were measured.
基金Project(2008AA03323) supported by the High-Tech Research and Development of ChinaProject(21374016) supported by the National Natural Science Foundation of ChinaProject(BY201153) supported by Production,Forward-Looking Joint Research Project of Jiangsu Province,China
文摘The matrix polymer PTBCHNB bearing o-nitrobenzyl group was successfully synthesized by copolymerization of tertiary-butyl methacrylate(TBMA), cyclohexyl methacrylate(CHMA) and o-nitrobenzyl methacrylate(NBMA) via reversible addition fragmentation chain transfer(RAFT) polymerization method. PTBCHNB was characterized by FTIR, 1HNMR, GPC and DSC. After UV irradiation, the o-nitrobenzyl groups of PTBCHNB were photocleaved and the resulting carboxyl groups were highly alkali soluble, and PTBCHNB was converted to PCHIBMA bearing carboxyl groups. So, the matrix polymer could be etched by mild alkali solution with no requirements of photoacid generators and other diverse additives. The photocleavable behaviors of PTBCHNB were determined by FTIR, 1H NMR and TGA analysis. The resist formulated with PTBCHNB and cast in THF solution showed square pattern of 10 μm×10 μm using a mercury-xenon lamp in a contact printing mode and tetramethyl-ammonium hydroxide aqueous solution as a developer.
文摘Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate(nano-CaCO3) surface modified with γ-methacryloxypropyltrimethoxysilane (MPTMS) was carried out to prepare poly (methyl methacrylate) (PMMA)/nano-CaCO3 composite. The reaction between nano-CaCO3 and MPTMS, and the grafting of PMMA onto nano-CaCO3 were confirmed by infrared spectrum. The grafting ratio and grafting efficiency of PMMA on nano-CaCO3 modified with MPTMS were much higher than that on nano-CaCO3 modified with stearic acid. The grafting ratio of PMMA increased as the weight ratio between MMA and nano-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that nano-CaCO3 covered with PMMA was formed by in-situ emulsion polymerization.
文摘Polybutylacrylate (PBA)/poly(methyl methacrylate) (PMMA) core-shell elastic particles (CSEP), whose rubbery core diameter ranged from 0.08 μm to 1.38μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.
基金Supported by the Key Program of the National Natural Science Foundation of China(21036007)the National High-Tech Project of China(2012AA062903)
文摘Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity.
基金supported by NIH R01 DE17974West China School of Stomatologya Seed Grant from Department of Endodontics,Prosthodontics and Operative Dentistry,University of Maryland
文摘Antibacterial adhesives are promising to inhibit biofilms and secondary caries. The objectives of this study were to synthesize and incorporate quaternary ammonium methacrylates into adhesives, and investigate the alkyl chain length effects on three-dimensional biofilms adherent on adhesives for the first time. Six quaternary ammonium methacrylates with chain lengths of 3, 6, 9, 12, 16 and 18 were synthesized and incorporated into Scotchbond Multi-Purpose. Streptococcus mutans bacteria were cultured on resin to form biofilms. Confocal laser scanning microscopy was used to measure biofilm thickness, live/dead volumes and live-bacteria percentage vs. distance from resin surface. Biofilm thickness was the greatest for Scotchbond control; it decreased with increasing chain length, reaching a minimum at chain length 16. Live-biofilm volume had a similar trend. Dead-biofilm volume increased with increasing chain length. The adhesive with chain length 9 had 37% live bacteria near resin surface, but close to 100% live bacteria in the biofilm top section. For chain length 16, there were nearly 0% live bacteria throughout the three-dimensional biofilm. In conclusion, strong antibacterial activity was achieved by adding quaternary ammonium into adhesive, with biofilm thickness and live-biofilm volume decreasing as chain length was increased from 3 to 16. Antibacterial adhesives typically only inhibited bacteria close to its surface; however, adhesive with chain length 16 had mostly dead bacteria in the entire three-dimensional biofilm. Antibacterial adhesive with chain length 16 is promising to inhibit biofilms at the margins and combat secondary caries.
基金This work was supported by a grant from the National Natural Science Foundation of China (grant no. 39840017).
文摘Objective To evaluate the genotoxic and nongenotoxic effects of short-term exposure to glycidyl mathacrylate (GMA) on human lung fibroblast cells (2BS cells) in vitro. Methods DNA strand breakage was determined by single cell gel electrophoresis, and DNA ladder formation assay and flow cytometric analysis were carried out to detect apoptic responses of cells to GMA exposure. The HPRT gene mutation assay was used to evaluate the mutagenicity, and the effect of GMA on gap junctional intercellular communication (GJIC) in the exposed cells was examined with the scrape loading/dye transfer technique. The ability of GMA to transform 2BS cells was also tested by an in vitro cell transformation assay. Results Exposure to GMA resulted in a dose-dependent increase in DNA strand breaks but not apoptic responses. GMA was also shown to significantly induce HPRT gene mutations and morphological transformation in 2BS cells in vitro. In contrast, GMA produced a concentration-dependent inhibition of GJIC. Conclusions GMA elicits both genotoxic and nongenotoxic effects on 2BS cells in vitro. The induction of DNA damage and gene mutations and inhibition of GJIC by GMA may casually contribute to GMA-induced cell transformation.
文摘Poly （ethyleneglycol monomethylether） methacrylate （PEGMM）was synthesized by means of the reaction of methacrylyl chloride with sodium monomethylpolyethyleneglycoxide and was characterized by FTIR,;H-NMR,and ultraviolet spectrometries. A series of poly （vinyl alcohol）-graft-PEGMM （PVA-g-PEGMM ）and methyl methacrylate-PEGMM copolymer （PMMA-PEGMM） were prepared and tested for antithrombogenicity in vitro. The results indicate that the antithrombogenicity of the copolymers basically increases with the increasing of the DP of polyoxyethylene （POE） chain and tends to a plateau after the DP around 114,i.e. the long chain structure of POE is favourable to the antithrombogenicityof its copolymers ;moreover, the extent of the improvement ofantithrombogenicity also relates to the PEGMM content of the copolymers and the kind of the matrix that the POE chains are located on. These results are consistent with the anticipation of the hypothesis of maintaining proteins normal conformations for blood compatible bioraaterials.
基金supported by NIH R01 DE17974 (Hockin HK Xu)a scholarship from West China School of Stomatology (Chen Chen)+3 种基金Program for New Century Excellent Talents in University (Lei Cheng)Youth Grant of Science and Technology Department of Sichuan Province China (2014JQ0033) (Lei Cheng)a bridge fund from University of Maryland Baltimore School of Dentistry (Hockin HK Xu)a seed grant from University of Maryland Baltimore (Hockin HK Xu)
文摘Antibacterial dimethylaminododecyl methacrylate （DMADDM） was recently synthesized. The objectives of this study were to： （1） investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans impregnated into dentin blocks for the first time, and （2） compare the antibacterial efficacy of DMADDM with a previous quaternary ammonium dimethacrylate （QADM）. Scotchbond Multi-Purpose （SBMP） bonding agent was used. DMADDM and QADM were mixed into SBMP primer. Six primers were tested： SBMP control primer P, P＋2.5% DMADDM, P＋5% DMADDM, P＋7.5% DMADDM, P＋10% DMADDM, and P＋10% QADM. S. mutans were impregnated into human dentin blocks, and each primer was applied to dentin to test its ability to kill bacteria in dentinal tubules. Bacteria in dentin were collected via a sonication method, and the colony-forming units （CFU） and inhibition zones were measured. The bacterial inhibition zone of P＋10% DMADDM was 10 times that of control primer （P〈0.05）. CFU in dentin with P＋10% DMADDM was reduced by three orders of magnitude, compared with control. DMADDM had a much stronger antibacterial effect than QADM, and antibacterial efficacy increased with increasing DMADDM concentration. Dentin shear bond strengths were similar among all groups （P〉0.1）. In conclusion, antibacterial DMADDM-containing primer was validated to kill bacteria inside dentin blocks, possessing a much stronger antibacterial potency than the previous QADM. DMADDM-containing bonding agent was effective in eradicating bacteria in dentin, and its efficacy was directly proportional to DMADDM mass fraction. Therefore, DMADDM may be promisine for use in bonding agents as well as in other restorative and oreventive materials to inhibit bacteria.
基金Project(51202296) supported by the National Natural Science Foundation of China
文摘To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting system,the thermal behavior of obtained green body,and the microstructures and mechanical properties of the sintered bodies were investigated by rheometer,TG-DSC,SEM and bending strength testing,respectively.The results show that,(1)10 mg/mL of the initiator(benzoyl peroxide)is the optimal amount for polymerization of this gelscasting system at 25 ℃;(2)The alumina suspension of the HEMA-TBA gelcasting system showing shear-thinning behavior is sufficiently low for gelcasting process;(3)The bending strength of porous alumina ceramic samples,whose porosities range from 42% to 56%,is from(8±0.5)to(91±4.5)MPa.
文摘Synthesis and characterization of the copolymers （PAG） of α-methyl styrene （AMS） and glycidyl methacrylate （GMA） are presented. The copolymers of PAG were characterized by gel permeation chromatography （GPC）, Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （^1H-NMR） and thermogravimetery （TG）. Based on the copolymer compositions determined by ^1H-NMR, the reactivity ratios of AMS and GMA were found to be 0.105 ± 0.012 and 0.883 ± 0.046 respectively by Kelen-Tudos method. TG revealed that thermal stability of the copolymers decreased with increasing the AMS content in the copolymers, which indicated that the degradation was mainly caused by the chain scission of AMS-containing structures. Under heating, the copolymers depolymerize at their weak bonds and form chain radicals, which could further initiate other chemical reactions.
基金Financial support from Zhejiang Provincial Natural Science Foundation （No.R203154, Y405124） is gratefully acknowledged.
文摘Atom transfer radical polymerization （ATRP） of methyl methacrylate （MMA） employing ethyl 2-bromoisobutyrate （EBiB）/ CuBr as the initiating system was investigated at 50 ℃ in the absence of any additional ligand in the three room temperature ionic liquids （RTILs）, 1-methyl-imidazolium acetate （[mim][CH3COO]）, 1-methylimidazolium propionate （[mim][CH3CH2COO]） and 1-methylimidazolium butyrate （[mim][CH3CH2CH2COO]）, respectively. All the polymerization in the three RTILs proceeded in a well-controlled manner. The sequence of the apparent polymerization rate constants was kapp（[mim][CH3COO]） 〉 kapp（[mim] [CH3CH2COO]） 〉 kapp （[mim][CH3CH2CH2COO]）.
基金supported by the National Key R&D Program of China(No.2018YFA0703000)the National Natural Science Foundation of China(Nos.82071564,82072412,and 81772326)+1 种基金the Fundamental Research Program Funding of Ninth People’s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine(No.JYZZ070)Project of Shanghai Science and Technology Commission(No.19XD1434200/18431903700)。
文摘Poly methyl methacrylate(PMMA)bone cement is used in augmenting and stabilizing fractured vertebral bodies through percutaneous vertebroplasty(PVP)and percutaneous kyphoplasty(PKP).However,applications of PMMA bone cement are limited by the high elasticity modulus of PMMA,its low biodegradability,and its limited ability to regenerate bone.To improve PMMA bio activity and biodegradability and to modify its elasticity modulus,we mixed PMMA bone cement with oxidized hyaluronic acid and carboxymethyl chitosan in situ cross-linking hydrogel loaded with bone morphogenetic protein-2(BMP-2)to achieve novel hybrid cement.These fabric ated PMMA-hydrogel hybrid cements exhibited lower setting temperatures,a lower elasticity modulus,and better biodegradability and biocompatibility than that of pure PMMA cement,while retaining acceptable setting times,mechanical strength,and inj ectability.In addition,we detected release of BMP-2 from the PMMA-hydrogel hybrid cements,significantly enhancing in vitro osteogenesis of bone marrow mesenchymal stem cells by up-regulating the gene expression of Runx2,Coll,and OPN.Use of PMMA-hydrogel hybrid cements loaded with BMP-2 on rabbit femoral condyle bone-defect models revealed their biodegradability and enhanced bone formation.Our study demonstrated the favorable mechanical properties,biocompatibility,and biodegradability of fabricated PMMA-hydrogel hybrid cements loaded with BMP-2,as well as their ability to improve osteogenesis,making them a promising material for use in PKP and PVP.
