According to the load-structure method, the wall rock with lining can bear the load caused by the surrounding rock, and the rock resistant coefficient (RRC) is a key parameter for evaluating the capacity of this wall ...According to the load-structure method, the wall rock with lining can bear the load caused by the surrounding rock, and the rock resistant coefficient (RRC) is a key parameter for evaluating the capacity of this wall rock. Based on the Mohr-Coulomb yield criterion, this paper develops a formula for calculating the RRC, which has been applied to the real engi-neering project, such as Xiamen Xiang’an East Passage Underwater Tunnel Project. The fact shows that this formula is helpful for designers to determine the RRC value.展开更多
The analysis of plane strain elastic-plastic bending of a linear strain hardening curved beam with a narrow rectangular cross section subjected to couples at its end is conducted based on a unified yield criterion. Th...The analysis of plane strain elastic-plastic bending of a linear strain hardening curved beam with a narrow rectangular cross section subjected to couples at its end is conducted based on a unified yield criterion. The solutions for the mechanical properties of plane strain bending are derived, which are adapted for various kinds of non-strength differential materials and can be degenerated to those based on the Tresca, von Mises, and twin-shear yield criteria. The dependences of the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane on different yield criteria and Poisson’s ratios are discussed. The results show that the influences of different yield criteria and Poisson’s ratio on the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane of the curved beam are significant. Once the value of bis obtained by experiments, the yield criterion and the corresponding solution for the materials of interest are then determined.展开更多
In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate ...In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.展开更多
In this paper, the Mohr-Coulomb shear strength criterion is modified by mobilising the cohesion and internal friction angle with normal stress, in order to capture the nonlinearity and critical state concept for intac...In this paper, the Mohr-Coulomb shear strength criterion is modified by mobilising the cohesion and internal friction angle with normal stress, in order to capture the nonlinearity and critical state concept for intact rocks reported in the literature. The mathematical expression for the strength is the same as the classical form, but the terms of cohesion and internal friction angle depend on the normal stress now,leading to a nonlinear relationship between the strength and normal stress. It covers both the tension and compression regions with different expressions for cohesion and internal friction angle. The strengths from the two regions join continuously at the transition of zero normal stress. The part in the compression region approximately satisfies the conditions of critical state, where the maximum shear strength is reached. Due to the nonlinearity, the classical simple relationship between the parameters of cohesion, internal friction angle and uniaxial compressive strength from the linear Mohr-Coulomb criterion does not hold anymore. The equation for determining one of the three parameters in terms of the other two is supplied. This equation is nonlinear and thus a nonlinear equation solver is needed. For simplicity, the classical linear relationship is used as a local approximation. The approximate modified Mohr-Coulomb criterion has been implemented in a fracture mechanics based numerical code FRACOD,and an example case of deep tunnel failure is presented to demonstrate the difference between the original and modified Mohr-Coulomb criteria. It is shown that the nonlinear modified Mohr-Coulomb criterion predicts somewhat deeper and more intensive fracturing regions in the surrounding rock mass than the original linear Mohr-Coulomb criterion. A more comprehensive piecewise nonlinear shear strength criterion is also included in Appendix B for those readers who are interested. It covers the tensile, compressive, brittle-ductile behaviour transition and the critical state, and gives smooth transitions.展开更多
With the increase of mining depth of mineral resources,the rock mass stress state is being more and more complex.The rock mass show different features,namely,with the increase of hydrostatic pressure,rock mass failure...With the increase of mining depth of mineral resources,the rock mass stress state is being more and more complex.The rock mass show different features,namely,with the increase of hydrostatic pressure,rock mass failure mode turns from brittle tension failure to structure ductile failure and its limit strength also increases.The restriction of minimal principal stress on the initiation and development of microcrack and the change of micro-unit stress state by the intermediate principal stress play a decisive role in the increase of rock mass limit strength.Based on the rock mass failure behavior law under complex stress state and the σ2-dependence on the rock mass strength,we proposed a Modified Mohr-Coulomb(M-MC) strength criterion which is smooth and convex.Finally,the M-MC criterion is validated by multiaxial test data of eight kinds of rock mass.We also compared the fitting results with Mohr-Coulomb criterion(MC).It shows that the new criterion fits the test data better than the Mohr-Coulomb criterion.So the M-MC strength criterion well reveals the rock mass bearing behavior and can be widely used in the rock mass strength analysis.The results can provide theoretical foundations for stability analysis and reinforcement design of complex underground engineering.展开更多
Based on the nonlinear Mohr-Coulomb failure criterion and the associated flow rules,the three-dimensional(3-D)axisymmetric failure mechanism of shallow horizontal circular plate anchors that are subjected to the ultim...Based on the nonlinear Mohr-Coulomb failure criterion and the associated flow rules,the three-dimensional(3-D)axisymmetric failure mechanism of shallow horizontal circular plate anchors that are subjected to the ultimate pullout capacity(UPC)is determined.A derivative function of the projection function for projecting the 3-D axisymmetric failure surface on plane is deduced using the variation theory.By using difference principle,the primitive function of failure surface satisfying boundary condition and numerical solution to its corresponding ultimate pullout capacity function are obtained.The influences of nonlinear Mohr-Coulomb parameters on UPC and failure mechanism are studied.The result shows that UPC decreases with dimensionless parameter m and uniaxial tensile strength increases but increases when depth and radius of plate anchor,surface overload,initial cohesion,geomaterial density and friction angle increase.The failure surface is similar to a symmetrical spatial funnel,and its shape is mainly determined by dimensionless parameter m;the surface damage range expands with the increase of radius and depth of the plate anchor as well as initial cohesion but decreases with the increase of dimensionless parameter m and uniaxial tensile strength as well as geomaterial density.As the dimensionless parameter m=2.0,the numerical solution of UPC based on the difference principle is proved to be feasible and effective through the comparison with the exact solution.In addition,the comparison between solutions of UPC computed by variation method and those computed by upper bound method indicate that variation method outperforms upper bound method.展开更多
A generalized yield criterion is proposed based on the metai plastic deformation mechanics and the fundamental formula in theory of plasticity. Using the generalized yield criterion, the reason is explained that Mises...A generalized yield criterion is proposed based on the metai plastic deformation mechanics and the fundamental formula in theory of plasticity. Using the generalized yield criterion, the reason is explained that Mises yield criterion and Tresca yield criterion do not completely match with experimental data. It has been shown that the yield criteria of ductile metals depend not only on the quadratic invariant of the deviatoric stress tensor J2, but also on the cubic invariant of the deviatoric stress tensor J3 and the ratio of the yield stress in pure shear to the yield stress in uniaxial tension κ/σs. The reason that Mises yield criterion and Tresca yield criterion are not in good agreement with the experimental data is that the effect of J3 and κ/σs is neglected.展开更多
Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an anal...Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an analytical expression of rolling torque and single force was obtained. Through redoing the same experiment of rolling pure lead as Sims, the calculated results by the above expression were compared with those of Kobayashi and Sims formulae. The results show that the twin shear stress yield criterion is available for rolling analysis and the calculated results by the new formula are a little higher than those by Kobayashi and Sims ones if the reduction ratio is less than 30%.展开更多
In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic...In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic work rate expressed as a linear function of the yield stress, the maximum and minimum strains was also deduced and compared with that of Mises criterion. The physical meaning of the proposed yield criterion is that yielding of materials begins when the shear yield stress τs reaches the magnitude of 0.594σs. By introducing the Lode parameter, validation of evolution expressions of the proposed yield criterion with those based on Tresca, Mises and TSS criteria as well as available classical yield experimental results of various metals shows that the present results intersect with Mises results and coincide well with experimental data. Moreover, further application to the limit analysis of circle plate as an example is performed to demonstrate the effectiveness of the proposed yield criterion, and the subsequent comparison of limit loads with the Tresca analytical solutions and Mises numerical results shows that the present results are higher than the Tresca analytical results, and are in good agreement with the Mises numerical results.展开更多
A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compres...A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compressive plastic deformation, were taken into account in this model, These two deformation mechanisms were described by the shear and compressive yield functions, respectively. The Lode angle dependent formulations of proposed model were deduced by incorporating a 3D nonlinear unified failure criterion. Some comparisons were presented between the numerical predictions of proposed model and test data of true triaxial tests on the modeled rockfills. The model predictions are in good agreement with the test data and capture the strain hardening and plastic volumetric dilation of CGMs. These findings verify the reasonability of current DYS model, and indicate that this model is well suited to reproduce the stress-strain-volume change behavior of CGMs in general.展开更多
Currently, for some complex plastic deformations, the analytical solution can not be obtained by using Mises yield criterion, because Mises yield criterion is nine dimensions, the velocity field is complex, and the so...Currently, for some complex plastic deformations, the analytical solution can not be obtained by using Mises yield criterion, because Mises yield criterion is nine dimensions, the velocity field is complex, and the solving methods are not innovative. Corresponding solutions of these problems are that yield criterion is linearized to reduce the variable numbers, and the velocity field and the solving methods are reasonably simplified, respectively. In this paper, a new linear yield criterion--mean yield（MY） criterion and inner-product of strain rate vector are used to analytically solve 3D forging taking into account bugling of sides. The velocity field is expressed as a vector in three dimensions, and rotation and divergence are applied to confirm that the velocity field is kinematically admissible. Then, the corresponding strain rate tensor of the velocity field is transformed into principal one by making the determinant of coefficients of the tensor cubic equation be zero. By using MY criterion, the plastic power is term by term integrated and summed according to inner-product of strain rate vector. An upper bound analytical solution is obtained for the forging, and verified by a pure lead press test. The test result turns out that the total pressure calculated by MY criterion is higher by 2.5%-15% than measuring value. In addition, a measuring formula of bulging parameter （a） is proposed, but the values of a measured by the formula are lower than those optimized by the golden section search. The total pressure calculated by MY criterion is compared with the ones by twin shear, Trasca yield, and Mises yield criterion. The comparing result shows that the total pressure calculated by MY criterion is slightly higher than the mean value of that by twin shear and Trasca yield criterion, and lower than that by Mises yield criterion, but more close to that by Mises yield criterion compared with that by other two. The proposed analytical solving methods can be effectively used to other complex plastic deformation, simplifying the solving process and obtaining the reasonable results.展开更多
A primary goal of seismic design of buildings is to protect people's life safety during strong earthquakes. Fundamentally,to predict the survived space and estimate people escape intervals during structural collap...A primary goal of seismic design of buildings is to protect people's life safety during strong earthquakes. Fundamentally,to predict the survived space and estimate people escape intervals during structural collapse are very important,which requires to describe the failure process more detailedly not only for structural joints but also for slabs and shear walls. In the present paper,the details of Mohr-Coulomb failure criterion with tension-cutoff together with its expression in failure surface and local coordinate system of reinforced concrete( RC) shear wall are given firstly,and then several typical cracking patterns of RC shear wall,such as tension shear crack and compression shear crack, are analyzed based on Mohr-Coulomb failure criterion with tension-cutoff.展开更多
[Objective] The paper was to study the disease grading criterion and assess the yield loss caused by maize rough dwarf disease. [Method] The ear lengths and yields of each healthy and infected plant of 5 cultivars wer...[Objective] The paper was to study the disease grading criterion and assess the yield loss caused by maize rough dwarf disease. [Method] The ear lengths and yields of each healthy and infected plant of 5 cultivars were measured during 2009 and 2010. The severity grading criterion was deduced according to the ear length ratios. [Result]When the ratios were 0.92-1.00, 0.67-0.91, 0.41-0.66, 0.10-0.40 and 0, its corresponding disease grading criterions were 0, 1, 3, 5 and 7, respectively. The severity grading criterion was closely correlated to the yield loss. By analyzing the data of disease indexes and yield loss rates of 27 cultivars with DPS （Data Processing System）, the regression equations were established respectively. According to the comparison with each other, the Weibull Model was proved to have the highest fitting degree. Validating with the disease indexes of 27 cultivars in 2010, the equation supported the feasibility of the equation to predict the yield loss caused by maize rough dwarf disease. [Conclusion] The paper provided theoretical basis for further study on maize rough dwarf disease.展开更多
Many experimental results show that a wide class of ductile materials obey often nonlinear behavior, thus it is important to propose a nonlinear criterion describing nonlinear behavior of ductile material. A new nonli...Many experimental results show that a wide class of ductile materials obey often nonlinear behavior, thus it is important to propose a nonlinear criterion describing nonlinear behavior of ductile material. A new nonlinear yield criterion was proposed which gives a series of new failure criteria, establishes a relationship among various failure criteria, and encompasses previous yield criteria as special cases or approximations. The criterion is capable of being expressed in a simple mathematical expression and through a particular physical concept, it also agree with some experimental data. It may therefore serve as a possible admissible isotropic yield criterion.展开更多
A novel yield criterion based on CPB06 considering anisotropic and tension-compression asymmetric behaviors of magnesium alloys was derived and proposed(called M_CPB06).This yield criterion can simultaneously predict ...A novel yield criterion based on CPB06 considering anisotropic and tension-compression asymmetric behaviors of magnesium alloys was derived and proposed(called M_CPB06).This yield criterion can simultaneously predict the yield stresses and the Lankford ratios at different angles(if any)under uniaxial tension,compression,equal-biaxial and equal-compression conditions.Then,in order to further describe the anisotropic strain-hardening characteristics of magnesium alloy,the proposed M_CPB06 criterion was further evolved to the M_CPB06ev model by expressing the parameters of the M_CPB06 model as functions of the plastic strain.As the model was developed,the stresses and Lankford ratios of AZ31B and ZK61M magnesium alloys at different angles under tensile,compressive and through-thickness compressive conditions were used to calibrate the M_CPB06/M_CPB06ev and the existing CPB06ex2 model.Calibration results reveal that compared with the CPB06ex2 yield criterion with equal quantity of coefficients,the M_CPB06 criterion exhibits certain advancement,and meanwhile the M_CPB06ev model can relatively accurately predict the change of the yield locus with increase of the plastic strain.Finally,the M_CPB06ev model was developed through UMAT in LS-DYNA.Finite element simulations using the subroutine were conducted on the specimens of different angles to the rolling direction under tension and compression.Simulation results were highly consistent with the experimental results,demonstrating a good reliability and accuracy of the developed subroutine.展开更多
Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines req...Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines requires a complete understanding of complex pillar damage mechanisms.Continuum models represent a convenient tool for analyzing this problem,but the behavior of such models is dependent of the choice of the constitutive model.In this study,a recently proposed constitutive model was used to simulate the rib fracturing process in a longwall chain pillar at West Cliff mine.After calibration,the model was able to capture the rib displacement profiles for multiple locations of the longwall face and the stress evolution 4 m into the pillar.The rib bolts in the model were found to be yielding over 60% of their length under the headgate loading condition.The model also predicted a steady damage accumulation in the rib for certain face locations,which is consistent with the description of the rib at the site.Damage was localized along the upper part of the pillar and underscored the role that the dirt band played in controlling rib deterioration at the site.The ability of the numerical model to replicate field measurements provides confidence in the capabilities of the new constitutive model.Finally,the need of using multi-point calibration is highlighted by comparing the results of the calibrated model to an alternative model calibrated to a smaller amount of data.展开更多
A kinematically admissible continuous velocity field was proposed for the analysis of three-dimensional forging.The linear yield criterion expressed by geometric midline of error triangle between Tresca and Twin shear...A kinematically admissible continuous velocity field was proposed for the analysis of three-dimensional forging.The linear yield criterion expressed by geometric midline of error triangle between Tresca and Twin shear stress yield loci on the π-plane,called GM yield criterion for short,was firstly applied to analysis of the velocity field for the forging.The analytical solution of the forging force with the effects of external zone and bulging parameter is obtained by strain rate inner product.Compression tests of pure lead are performed to compare the calculated results with the measured ones.The results show that the calculated total pressures are higher than the measured ones whilst the relative error is no more than 9.5%.It is implied that the velocity field is reasonable and the geometric midline yield criterion is available.The solution is still an upper-bound one.展开更多
In this paper a linearized and unified yield crierion of metals is presented, which is in a form of a set of linear functions with two pararneters. The parameters are ex- pressed in terms of tension yield stress and ...In this paper a linearized and unified yield crierion of metals is presented, which is in a form of a set of linear functions with two pararneters. The parameters are ex- pressed in terms of tension yield stress and so-called “shear-stretch ratio” and can bereadily determined from experimental data. It is shown that in stress space the set of yield functions is a set of polygons with twelve edges located between the Tresca’s hexagon and twin-shear-stress hexagon￣[1]. In this paper the present yield function isused to analyse the prestressiap loose running fit cylinders.展开更多
The correction in the derivation of the Gurson yield criterion is reported. Aprerequisite kine-matical condition ignored in Gurson's paper is imposed, and a parameter (C_1) ,which was unreasonably set to zero, is ...The correction in the derivation of the Gurson yield criterion is reported. Aprerequisite kine-matical condition ignored in Gurson's paper is imposed, and a parameter (C_1) ,which was unreasonably set to zero, is restored.展开更多
Inspired by Cardano＇s method for solving cubic scalar equations, the addi- tive decomposition of spherical/deviatoric tensor （DSDT） is revisited from a new view- point. This decomposition simplifies the cubic tenso...Inspired by Cardano＇s method for solving cubic scalar equations, the addi- tive decomposition of spherical/deviatoric tensor （DSDT） is revisited from a new view- point. This decomposition simplifies the cubic tensor equation, decouples the spher- ical/deviatoric strain energy density, and lays the foundation for the von Mises yield criterion. Besides, it is verified that under the precondition of energy decoupling and the simplest form, the DSDT is the only possible form of the additive decomposition with physical meanings.展开更多
文摘According to the load-structure method, the wall rock with lining can bear the load caused by the surrounding rock, and the rock resistant coefficient (RRC) is a key parameter for evaluating the capacity of this wall rock. Based on the Mohr-Coulomb yield criterion, this paper develops a formula for calculating the RRC, which has been applied to the real engi-neering project, such as Xiamen Xiang’an East Passage Underwater Tunnel Project. The fact shows that this formula is helpful for designers to determine the RRC value.
基金The Project of the Ministry of Housing and Urban-Rural Development(No.2014-K4-010)
文摘The analysis of plane strain elastic-plastic bending of a linear strain hardening curved beam with a narrow rectangular cross section subjected to couples at its end is conducted based on a unified yield criterion. The solutions for the mechanical properties of plane strain bending are derived, which are adapted for various kinds of non-strength differential materials and can be degenerated to those based on the Tresca, von Mises, and twin-shear yield criteria. The dependences of the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane on different yield criteria and Poisson’s ratios are discussed. The results show that the influences of different yield criteria and Poisson’s ratio on the two critical bending moments, the radii of the interfaces between the elastic and plastic regions and the radial displacements of the points at the symmetrical plane of the curved beam are significant. Once the value of bis obtained by experiments, the yield criterion and the corresponding solution for the materials of interest are then determined.
基金This research was supported by the National Natural Sci—ence Foundation of China(Grant No.50474015)
文摘In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.
基金the International Collaboration Project on Coupled Fracture Mechanics Modelling(project team consisting of CSIRO,SDUST,Posiva,KIGAM,KICT,CAS-IRSM,DUT/Mechsoft,SNU,LBNL,ETH,Aalto Uni.,GFZ and TYUT)Taishan Scholar Talent Team Support Plan for Advantaged&Unique Discipline Areas,Shandong Province
文摘In this paper, the Mohr-Coulomb shear strength criterion is modified by mobilising the cohesion and internal friction angle with normal stress, in order to capture the nonlinearity and critical state concept for intact rocks reported in the literature. The mathematical expression for the strength is the same as the classical form, but the terms of cohesion and internal friction angle depend on the normal stress now,leading to a nonlinear relationship between the strength and normal stress. It covers both the tension and compression regions with different expressions for cohesion and internal friction angle. The strengths from the two regions join continuously at the transition of zero normal stress. The part in the compression region approximately satisfies the conditions of critical state, where the maximum shear strength is reached. Due to the nonlinearity, the classical simple relationship between the parameters of cohesion, internal friction angle and uniaxial compressive strength from the linear Mohr-Coulomb criterion does not hold anymore. The equation for determining one of the three parameters in terms of the other two is supplied. This equation is nonlinear and thus a nonlinear equation solver is needed. For simplicity, the classical linear relationship is used as a local approximation. The approximate modified Mohr-Coulomb criterion has been implemented in a fracture mechanics based numerical code FRACOD,and an example case of deep tunnel failure is presented to demonstrate the difference between the original and modified Mohr-Coulomb criteria. It is shown that the nonlinear modified Mohr-Coulomb criterion predicts somewhat deeper and more intensive fracturing regions in the surrounding rock mass than the original linear Mohr-Coulomb criterion. A more comprehensive piecewise nonlinear shear strength criterion is also included in Appendix B for those readers who are interested. It covers the tensile, compressive, brittle-ductile behaviour transition and the critical state, and gives smooth transitions.
基金supported by the National Natural Science Foundation of China (Nos.50774082 and 50804046)
文摘With the increase of mining depth of mineral resources,the rock mass stress state is being more and more complex.The rock mass show different features,namely,with the increase of hydrostatic pressure,rock mass failure mode turns from brittle tension failure to structure ductile failure and its limit strength also increases.The restriction of minimal principal stress on the initiation and development of microcrack and the change of micro-unit stress state by the intermediate principal stress play a decisive role in the increase of rock mass limit strength.Based on the rock mass failure behavior law under complex stress state and the σ2-dependence on the rock mass strength,we proposed a Modified Mohr-Coulomb(M-MC) strength criterion which is smooth and convex.Finally,the M-MC criterion is validated by multiaxial test data of eight kinds of rock mass.We also compared the fitting results with Mohr-Coulomb criterion(MC).It shows that the new criterion fits the test data better than the Mohr-Coulomb criterion.So the M-MC strength criterion well reveals the rock mass bearing behavior and can be widely used in the rock mass strength analysis.The results can provide theoretical foundations for stability analysis and reinforcement design of complex underground engineering.
基金Project(51478477)supported by the National Natural Science Foundation of ChinaProject(2016CX012)supported by the Innovation-driven Project of Central South University,ChinaProject(2014122006)supported by the Guizhou Provincial Department of Transportation Foundation,China
文摘Based on the nonlinear Mohr-Coulomb failure criterion and the associated flow rules,the three-dimensional(3-D)axisymmetric failure mechanism of shallow horizontal circular plate anchors that are subjected to the ultimate pullout capacity(UPC)is determined.A derivative function of the projection function for projecting the 3-D axisymmetric failure surface on plane is deduced using the variation theory.By using difference principle,the primitive function of failure surface satisfying boundary condition and numerical solution to its corresponding ultimate pullout capacity function are obtained.The influences of nonlinear Mohr-Coulomb parameters on UPC and failure mechanism are studied.The result shows that UPC decreases with dimensionless parameter m and uniaxial tensile strength increases but increases when depth and radius of plate anchor,surface overload,initial cohesion,geomaterial density and friction angle increase.The failure surface is similar to a symmetrical spatial funnel,and its shape is mainly determined by dimensionless parameter m;the surface damage range expands with the increase of radius and depth of the plate anchor as well as initial cohesion but decreases with the increase of dimensionless parameter m and uniaxial tensile strength as well as geomaterial density.As the dimensionless parameter m=2.0,the numerical solution of UPC based on the difference principle is proved to be feasible and effective through the comparison with the exact solution.In addition,the comparison between solutions of UPC computed by variation method and those computed by upper bound method indicate that variation method outperforms upper bound method.
文摘A generalized yield criterion is proposed based on the metai plastic deformation mechanics and the fundamental formula in theory of plasticity. Using the generalized yield criterion, the reason is explained that Mises yield criterion and Tresca yield criterion do not completely match with experimental data. It has been shown that the yield criteria of ductile metals depend not only on the quadratic invariant of the deviatoric stress tensor J2, but also on the cubic invariant of the deviatoric stress tensor J3 and the ratio of the yield stress in pure shear to the yield stress in uniaxial tension κ/σs. The reason that Mises yield criterion and Tresca yield criterion are not in good agreement with the experimental data is that the effect of J3 and κ/σs is neglected.
基金ItemSponsored by National Natural Science Foundation of China (50474015)
文摘Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an analytical expression of rolling torque and single force was obtained. Through redoing the same experiment of rolling pure lead as Sims, the calculated results by the above expression were compared with those of Kobayashi and Sims formulae. The results show that the twin shear stress yield criterion is available for rolling analysis and the calculated results by the new formula are a little higher than those by Kobayashi and Sims ones if the reduction ratio is less than 30%.
基金Project(51074052)supported by the National Natural Science Foundation of ChinaProject(BK20140334)supported by the Basic Research Program of Jiangsu Province+2 种基金ChinaProject(14KJB460024)supported by the Natural Science Foundation of Jiangsu Higher Education Institutions of ChinaProject(2014M561707)supported by China Postdoctoral Science Foundation
文摘In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic work rate expressed as a linear function of the yield stress, the maximum and minimum strains was also deduced and compared with that of Mises criterion. The physical meaning of the proposed yield criterion is that yielding of materials begins when the shear yield stress τs reaches the magnitude of 0.594σs. By introducing the Lode parameter, validation of evolution expressions of the proposed yield criterion with those based on Tresca, Mises and TSS criteria as well as available classical yield experimental results of various metals shows that the present results intersect with Mises results and coincide well with experimental data. Moreover, further application to the limit analysis of circle plate as an example is performed to demonstrate the effectiveness of the proposed yield criterion, and the subsequent comparison of limit loads with the Tresca analytical solutions and Mises numerical results shows that the present results are higher than the Tresca analytical results, and are in good agreement with the Mises numerical results.
基金Project(50825901)supported by the National Natural Science Foundation for Distinguished Young Scholar of ChinaProject(2009492011)supported by State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering,Nanjing Hydraulic Research Institute,China+1 种基金Project(GH200903)supported by Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering(Hohai University),ChinaProject(Y1090151)supported by Natural Science Foundation of Zhejiang Province,China
文摘A new double-yield-sarface （DYS） model was developed to characterize the strength and deformation behaviors of coarse granular materials （CGMs）. Two kinds of deformation mechanisms, including the shear and compressive plastic deformation, were taken into account in this model, These two deformation mechanisms were described by the shear and compressive yield functions, respectively. The Lode angle dependent formulations of proposed model were deduced by incorporating a 3D nonlinear unified failure criterion. Some comparisons were presented between the numerical predictions of proposed model and test data of true triaxial tests on the modeled rockfills. The model predictions are in good agreement with the test data and capture the strain hardening and plastic volumetric dilation of CGMs. These findings verify the reasonability of current DYS model, and indicate that this model is well suited to reproduce the stress-strain-volume change behavior of CGMs in general.
基金supported by National Natural Science Foundation of China (Grant No. 50474015)State Key Laboratory of Rolling and Automation(RAL) Self-determination Science Foundation of UK (Grant No. RAL_SD_2008_2)
文摘Currently, for some complex plastic deformations, the analytical solution can not be obtained by using Mises yield criterion, because Mises yield criterion is nine dimensions, the velocity field is complex, and the solving methods are not innovative. Corresponding solutions of these problems are that yield criterion is linearized to reduce the variable numbers, and the velocity field and the solving methods are reasonably simplified, respectively. In this paper, a new linear yield criterion--mean yield（MY） criterion and inner-product of strain rate vector are used to analytically solve 3D forging taking into account bugling of sides. The velocity field is expressed as a vector in three dimensions, and rotation and divergence are applied to confirm that the velocity field is kinematically admissible. Then, the corresponding strain rate tensor of the velocity field is transformed into principal one by making the determinant of coefficients of the tensor cubic equation be zero. By using MY criterion, the plastic power is term by term integrated and summed according to inner-product of strain rate vector. An upper bound analytical solution is obtained for the forging, and verified by a pure lead press test. The test result turns out that the total pressure calculated by MY criterion is higher by 2.5%-15% than measuring value. In addition, a measuring formula of bulging parameter （a） is proposed, but the values of a measured by the formula are lower than those optimized by the golden section search. The total pressure calculated by MY criterion is compared with the ones by twin shear, Trasca yield, and Mises yield criterion. The comparing result shows that the total pressure calculated by MY criterion is slightly higher than the mean value of that by twin shear and Trasca yield criterion, and lower than that by Mises yield criterion, but more close to that by Mises yield criterion compared with that by other two. The proposed analytical solving methods can be effectively used to other complex plastic deformation, simplifying the solving process and obtaining the reasonable results.
基金Ningbo Scientific and Technological Innovation Team,China(No.2011B81005)Zhejiang Communication Department Foundation,China(No.2013H54)+1 种基金Ningbo Communication and Transportation Committee Foundation,China(No.201314)Zhejiang Construction Bureau Project,China(No.2014Z108)
文摘A primary goal of seismic design of buildings is to protect people's life safety during strong earthquakes. Fundamentally,to predict the survived space and estimate people escape intervals during structural collapse are very important,which requires to describe the failure process more detailedly not only for structural joints but also for slabs and shear walls. In the present paper,the details of Mohr-Coulomb failure criterion with tension-cutoff together with its expression in failure surface and local coordinate system of reinforced concrete( RC) shear wall are given firstly,and then several typical cracking patterns of RC shear wall,such as tension shear crack and compression shear crack, are analyzed based on Mohr-Coulomb failure criterion with tension-cutoff.
基金Supported by "the Eleventh Five Year" Science and Technology Project of Anhui Province(08010302172)
文摘[Objective] The paper was to study the disease grading criterion and assess the yield loss caused by maize rough dwarf disease. [Method] The ear lengths and yields of each healthy and infected plant of 5 cultivars were measured during 2009 and 2010. The severity grading criterion was deduced according to the ear length ratios. [Result]When the ratios were 0.92-1.00, 0.67-0.91, 0.41-0.66, 0.10-0.40 and 0, its corresponding disease grading criterions were 0, 1, 3, 5 and 7, respectively. The severity grading criterion was closely correlated to the yield loss. By analyzing the data of disease indexes and yield loss rates of 27 cultivars with DPS （Data Processing System）, the regression equations were established respectively. According to the comparison with each other, the Weibull Model was proved to have the highest fitting degree. Validating with the disease indexes of 27 cultivars in 2010, the equation supported the feasibility of the equation to predict the yield loss caused by maize rough dwarf disease. [Conclusion] The paper provided theoretical basis for further study on maize rough dwarf disease.
文摘Many experimental results show that a wide class of ductile materials obey often nonlinear behavior, thus it is important to propose a nonlinear criterion describing nonlinear behavior of ductile material. A new nonlinear yield criterion was proposed which gives a series of new failure criteria, establishes a relationship among various failure criteria, and encompasses previous yield criteria as special cases or approximations. The criterion is capable of being expressed in a simple mathematical expression and through a particular physical concept, it also agree with some experimental data. It may therefore serve as a possible admissible isotropic yield criterion.
基金Beijing Natural Science Foundation(No.L201010)the United Fund of Ministry of Education for Equipment Pre-Research(Grant No.6141A02033121)National Natural Science Foundation of China(Grant No.51975041).
文摘A novel yield criterion based on CPB06 considering anisotropic and tension-compression asymmetric behaviors of magnesium alloys was derived and proposed(called M_CPB06).This yield criterion can simultaneously predict the yield stresses and the Lankford ratios at different angles(if any)under uniaxial tension,compression,equal-biaxial and equal-compression conditions.Then,in order to further describe the anisotropic strain-hardening characteristics of magnesium alloy,the proposed M_CPB06 criterion was further evolved to the M_CPB06ev model by expressing the parameters of the M_CPB06 model as functions of the plastic strain.As the model was developed,the stresses and Lankford ratios of AZ31B and ZK61M magnesium alloys at different angles under tensile,compressive and through-thickness compressive conditions were used to calibrate the M_CPB06/M_CPB06ev and the existing CPB06ex2 model.Calibration results reveal that compared with the CPB06ex2 yield criterion with equal quantity of coefficients,the M_CPB06 criterion exhibits certain advancement,and meanwhile the M_CPB06ev model can relatively accurately predict the change of the yield locus with increase of the plastic strain.Finally,the M_CPB06ev model was developed through UMAT in LS-DYNA.Finite element simulations using the subroutine were conducted on the specimens of different angles to the rolling direction under tension and compression.Simulation results were highly consistent with the experimental results,demonstrating a good reliability and accuracy of the developed subroutine.
基金funded by the National Institute for Occupational Safety and Health(NIOSH)(Grant No.200-2016-90154)sponsored by the Alpha Foundation for the Improvement of Mine Safety and Health,Inc.(ALPHA FOUNDATION)。
文摘Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines requires a complete understanding of complex pillar damage mechanisms.Continuum models represent a convenient tool for analyzing this problem,but the behavior of such models is dependent of the choice of the constitutive model.In this study,a recently proposed constitutive model was used to simulate the rib fracturing process in a longwall chain pillar at West Cliff mine.After calibration,the model was able to capture the rib displacement profiles for multiple locations of the longwall face and the stress evolution 4 m into the pillar.The rib bolts in the model were found to be yielding over 60% of their length under the headgate loading condition.The model also predicted a steady damage accumulation in the rib for certain face locations,which is consistent with the description of the rib at the site.Damage was localized along the upper part of the pillar and underscored the role that the dirt band played in controlling rib deterioration at the site.The ability of the numerical model to replicate field measurements provides confidence in the capabilities of the new constitutive model.Finally,the need of using multi-point calibration is highlighted by comparing the results of the calibrated model to an alternative model calibrated to a smaller amount of data.
基金Project(50474015)supported by the National Natural Science Foundation of China
文摘A kinematically admissible continuous velocity field was proposed for the analysis of three-dimensional forging.The linear yield criterion expressed by geometric midline of error triangle between Tresca and Twin shear stress yield loci on the π-plane,called GM yield criterion for short,was firstly applied to analysis of the velocity field for the forging.The analytical solution of the forging force with the effects of external zone and bulging parameter is obtained by strain rate inner product.Compression tests of pure lead are performed to compare the calculated results with the measured ones.The results show that the calculated total pressures are higher than the measured ones whilst the relative error is no more than 9.5%.It is implied that the velocity field is reasonable and the geometric midline yield criterion is available.The solution is still an upper-bound one.
文摘In this paper a linearized and unified yield crierion of metals is presented, which is in a form of a set of linear functions with two pararneters. The parameters are ex- pressed in terms of tension yield stress and so-called “shear-stretch ratio” and can bereadily determined from experimental data. It is shown that in stress space the set of yield functions is a set of polygons with twelve edges located between the Tresca’s hexagon and twin-shear-stress hexagon￣[1]. In this paper the present yield function isused to analyse the prestressiap loose running fit cylinders.
文摘The correction in the derivation of the Gurson yield criterion is reported. Aprerequisite kine-matical condition ignored in Gurson's paper is imposed, and a parameter (C_1) ,which was unreasonably set to zero, is restored.
基金supported by the National Natural Science Foundation of China(Nos.11072125 and11272175)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20130002110044)the China Postdoctoral Science Foundation(No.2015M570035)
文摘Inspired by Cardano＇s method for solving cubic scalar equations, the addi- tive decomposition of spherical/deviatoric tensor （DSDT） is revisited from a new view- point. This decomposition simplifies the cubic tensor equation, decouples the spher- ical/deviatoric strain energy density, and lays the foundation for the von Mises yield criterion. Besides, it is verified that under the precondition of energy decoupling and the simplest form, the DSDT is the only possible form of the additive decomposition with physical meanings.
