Numerical weather prediction(NWP)models have always presented large forecasting errors of surface wind speeds over regions with complex terrain.In this study,surface wind forecasts from an operational NWP model,the SM...Numerical weather prediction(NWP)models have always presented large forecasting errors of surface wind speeds over regions with complex terrain.In this study,surface wind forecasts from an operational NWP model,the SMS-WARR(Shanghai Meteorological Service-WRF ADAS Rapid Refresh System),are analyzed to quantitatively reveal the relationships between the forecasted surface wind speed errors and terrain features,with the intent of providing clues to better apply the NWP model to complex terrain regions.The terrain features are described by three parameters:the standard deviation of the model grid-scale orography,terrain height error of the model,and slope angle.The results show that the forecast bias has a unimodal distribution with a change in the standard deviation of orography.The minimum ME(the mean value of bias)is 1.2 m s^(-1) when the standard deviation is between 60 and 70 m.A positive correlation exists between bias and terrain height error,with the ME increasing by 10%−30%for every 200 m increase in terrain height error.The ME decreases by 65.6%when slope angle increases from(0.5°−1.5°)to larger than 3.5°for uphill winds but increases by 35.4%when the absolute value of slope angle increases from(0.5°−1.5°)to(2.5°−3.5°)for downhill winds.Several sensitivity experiments are carried out with a model output statistical(MOS)calibration model for surface wind speeds and ME(RMSE)has been reduced by 90%(30%)by introducing terrain parameters,demonstrating the value of this study.展开更多
Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassificatio...Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassification. A new segmentation method, called multi-resolution Ganssian mixture model method, is proposed. First, an image pyramid is constructed and son-father link relationship is built between each level of pyramid. Then the mixture model segmentation method is applied to the top level. The segmentation result on the top level is passed top-down to the bottom level according to the son-father link relationship between levels. The proposed method considers not only local but also global information of image, it overcomes the effect of noise and can obtain better segmentation result. Experimental result demonstrates its effectiveness.展开更多
We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects ...We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects （such as vehicles） tracking multiple moving targets. By using a modified Dijkstra＇s algorithm, an optimal path between each vehicle-target pair over a weighted grid-presented terrain is computed and updated to eliminate the problem of local minima and losing of tracking. Then, a dynamic path re-planning strategy using multi-resolution representation of a dynamic updating region is proposed to achieve high-performance by trading-off precision for efficiency, while guaranteeing accuracy. Primary experimental results showed that our algorithm successfully achieved l0 to 96 frames per second interactive path-replanning rates during a terrain simulation scenario with 10 to 100 vehicles and multiple moving targets.展开更多
Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topo...Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topographic factors like altitude,slope,slope direction,slope variability,surface roughness,and meteorological factors like temperature and wind speed.The results of the correction demonstrated that the ensemble learning method has a considerably corrective effect and the three methods(Random Forest,AdaBoost,and Bagging)adopted in the study had similar results.The mean bias between CMPAS and 85%of automatic weather stations has dropped by more than 30%.The plateau region displays the largest accuracy increase,the winter season shows the greatest error reduction,and decreasing precipitation improves the correction outcome.Additionally,the heavy precipitation process’precision has improved to some degree.For individual stations,the revised CMPAS error fluctuation range is significantly reduced.展开更多
In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different typ...In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different types of terrain. In this paper, an algorithm to generate random terrain data is given.展开更多
The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(Ca...The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(California Meteorological Model,CALMET) with 100-m horizontal spacing was driven with outputs from the Weather Research and Forecasting(WRF) model to obtain near-surface winds for the 1-year period from 12 September 2003 to 11 September 2004.Results were compared with wind observations at four sites.Traditional statistical scores,including correlation coefficients,standard deviations(SDs) and mean absolute errors(MAEs),indicate that the wind estimates from the WRF/CALMET modeling system are produced reasonably well.The correlation coefficients are relatively large,ranging from 0.5 to 0.7 for the zonal wind component and from 0.75 to 0.85 for the meridional wind component.MAEs for wind speed range from 1.5 to 2.0 m s-1 at 10 meters above ground level(AGL) and from 2.0 to 2.5 m s-1 at 60 m AGL.MAEs for wind direction range from 30 to 40 degrees at both levels.A spectral decomposition of the time series of wind speed shows positive impacts of CALMET in improving the mesoscale winds.Moreover,combining the CALMET model with WRF significantly improves the spatial variability of the simulated wind fields.It can be concluded that the WRF/CALMET modeling system is capable of providing a detailed near-surface wind field,but the physics in the diagnostic CALMET model needs to be further improved.展开更多
Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data...Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data and meteorological observations, a distributed model for calculating DSR over rugged terrain is developed. This model gives an all-sided consideration on factors influencing th a resolution of 1 km × 1 km for thDSR. Using the developed model, normals of annual DSR quantity wie Yellow River Basin was generated, with DEM data as the general characterization of terrain. Characteristics of DSR quantity influenced by geographic and topographic factors over rugged terrain were analyzed thoroughly. Results suggest that： influenced by local topographic factors, i.e. azimuth, slope and so on, and annual DSR quantity over mountainous area has a clear spatial difference; annual DSR quantity of sunny slope （or southern slope） of mountains is obviously larger than that of shady slope （or northern slope）. The calculated DSR quantity of the Yellow River Basin is provided in the same way as other kinds of spatial information and can be employed as basic geographic data for relevant studies as well.展开更多
The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrai...The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.展开更多
In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripher...In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripheral national territories,little or no solar radiation data,non-satisfactory sunshine hours data,and low quality of ground observed cloud cover data create a situation in which the spatial modeling of Extraterrestrial Solar Radiation(ESR) and its ground parameterization got sufficient scope.The Digital Elevation Model (DEM) input into Geographic Information System (GIS) is a compatible tool to demonstrate the spatial distribution of ESR over the rugged terrains of the study domain.For the first time,distributed modeling of ESR is done over the rugged terrains of Pakistan,based on DEM and ArcGIS..Results clearly depict that the complex landforms profoundly disrupt the zonal distribution of ESR in Pakistan.The screening impact of topography is higher on spatial distribution of ESR in winter and considerably low in summer.The combined effect of topography and latitude is obvious.Hence,the model was further testified by plotting Rb (ratio of ESR quantity over rugged terrain against plane surface) against azimuth at different latitudes with different angled slopes.The results clearly support the strong screening effect of rugged terrain through out the country especially in Himalayas,Karakoram and Hindukush (HKH),western border mountains and Balochistan Plateau.This model can be instrumental as baseline geospatial information for scientific investigations in Pakistan,where substantial fraction of national population is living in mountainous regions.展开更多
To solve the problem that the magnetic resonance(MR)image has weak boundaries,large amount of information,and low signal-to-noise ratio,we propose an image segmentation method based on the multi-resolution Markov rand...To solve the problem that the magnetic resonance(MR)image has weak boundaries,large amount of information,and low signal-to-noise ratio,we propose an image segmentation method based on the multi-resolution Markov random field(MRMRF)model.The algorithm uses undecimated dual-tree complex wavelet transformation to transform the image into multiple scales.The transformed low-frequency scale histogram is used to improve the initial clustering center of the K-means algorithm,and then other cluster centers are selected according to the maximum distance rule to obtain the coarse-scale segmentation.The results are then segmented by the improved MRMRF model.In order to solve the problem of fuzzy edge segmentation caused by the gray level inhomogeneity of MR image segmentation under the MRMRF model,it is proposed to introduce variable weight parameters in the segmentation process of each scale.Furthermore,the final segmentation results are optimized.We name this algorithm the variable-weight multi-resolution Markov random field(VWMRMRF).The simulation and clinical MR image segmentation verification show that the VWMRMRF algorithm has high segmentation accuracy and robustness,and can accurately and stably achieve low signal-to-noise ratio,weak boundary MR image segmentation.展开更多
In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with som...In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.展开更多
A numerical method is put forward in this paper, using the boundary element method （BEM） to model 3D terrain effects on magnetotelluric （MT） surveys, Using vector integral theory and electromagnetic field boundary...A numerical method is put forward in this paper, using the boundary element method （BEM） to model 3D terrain effects on magnetotelluric （MT） surveys, Using vector integral theory and electromagnetic field boundary conditions, the boundary problem of two electromagnetic fields in the upper half space （air） and lower half space （earth medium） was transformed into two vector integral equations just related to the topography ： one magnetic equation for computing the magnetic field and the other electrical equation for computing the electrical field. The topography integral is decomposed into a series of integrals in a triangle element. For the integral in a triangle element, we suppose that the electromagnetic field in it is the stack of the electromagnetic field in the homogeneous earth and the topography response which is a constant; so the computation becomes simple, convenient and highly accurate. By decomposition and computation, each vector integral equation can be calculated by solving three linear equations that are related to the three Cartesian directions. The matrix of these linear equations is diagonally dominant and can be solved using the Symmetric Successive Over-Relaxation （SSOR） method. The apparent resistivity curve of MT on two 3D terrains calculated by BEM is shown in this paper.展开更多
Augmented reality is the merging of synthetic sensory information into a user's perception of a real environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has...Augmented reality is the merging of synthetic sensory information into a user's perception of a real environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has gained more and more attention. In this paper, we mainly focus on point selection problem in terrain simplification using triangulated irregular network. Based on the analysis and comparison of traditional importance measures for each input point, we put forward a new importance measure based on local entropy. The results demonstrate that the local entropy criterion has a better performance than any traditional methods. In addition, it can effectively conquer the 'short-sight' problem associated with the traditional methods.展开更多
The purpose of this work is to analyze the feasibility of using the wavelet transform in the edge detection of digital terrain models (DTM) obtained by Laser Scanner. The Haar wavelet transform and the edge detection ...The purpose of this work is to analyze the feasibility of using the wavelet transform in the edge detection of digital terrain models (DTM) obtained by Laser Scanner. The Haar wavelet transform and the edge detection method called Wavelet Transform Modulus Maxima (WTMM), both implemented in Matlab language, were used. In order to validate and verify the efficiency of WTMM, the edge detection of the same DTM was performed by the Roberts, Sobel-Feldman and Canny methods, chosen due to the wide use in the scientific community in the area of Image Processing and Remote Sensing. The comparison of the results showed superior performance of WTMM in terms of processing time.展开更多
The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital imag...The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital image scanned in a cycle as the raw data.First the label rings are detected with the improved Hough transform (HT) method and followed by curve-fitting for accurate location;then the most probable window for each ping is detected with weighted neighborhood gray-level co-occurrence matrix;and finally the DTM is built by integrating the GPS data with sonar data for 3D visualization.The case of an underwater trench for immersed tube road tunnel is illustrated.展开更多
An integrated hydrological model has been applied for a rural-urban catchment of the Szamos-Kraszna interfluve geographic area, using the WateRisk integrated hydrological model system. The aim of the hydrological simu...An integrated hydrological model has been applied for a rural-urban catchment of the Szamos-Kraszna interfluve geographic area, using the WateRisk integrated hydrological model system. The aim of the hydrological simulations was to identify the role that the relief plays in the water coverage formation process, and to highlight the possible consequences of it on phosphorus transport processes. To support this aim, the rainfall-runoff and the one-dimensional flow routing modules have been modelled, and maximal water cover has been calculated. Measured water coverage data by remote sensing have been compared to calculated maximum water cover in several ways. Results support the existing perspective on excess water formation namely that the process is very complex, therefore, the coincidence of the locations of measured water cover with calculated maximum water cover based on the DEM （digital elevation model） and the river network is low. Analysis shows that as far as the larger depressions of the area are concerned, the error of the DEM is not high, but it is likely that at locations with small altitude differences, the error of DEM can cause larger errors. The results foreshadow the importance of the micro relief of the area on phosphorus transport.展开更多
基金supported by the National Natural Science Foundation of China(No.U2142206).
文摘Numerical weather prediction(NWP)models have always presented large forecasting errors of surface wind speeds over regions with complex terrain.In this study,surface wind forecasts from an operational NWP model,the SMS-WARR(Shanghai Meteorological Service-WRF ADAS Rapid Refresh System),are analyzed to quantitatively reveal the relationships between the forecasted surface wind speed errors and terrain features,with the intent of providing clues to better apply the NWP model to complex terrain regions.The terrain features are described by three parameters:the standard deviation of the model grid-scale orography,terrain height error of the model,and slope angle.The results show that the forecast bias has a unimodal distribution with a change in the standard deviation of orography.The minimum ME(the mean value of bias)is 1.2 m s^(-1) when the standard deviation is between 60 and 70 m.A positive correlation exists between bias and terrain height error,with the ME increasing by 10%−30%for every 200 m increase in terrain height error.The ME decreases by 65.6%when slope angle increases from(0.5°−1.5°)to larger than 3.5°for uphill winds but increases by 35.4%when the absolute value of slope angle increases from(0.5°−1.5°)to(2.5°−3.5°)for downhill winds.Several sensitivity experiments are carried out with a model output statistical(MOS)calibration model for surface wind speeds and ME(RMSE)has been reduced by 90%(30%)by introducing terrain parameters,demonstrating the value of this study.
基金This project was supported by the National Natural Foundation of China (60404022) and the Foundation of Department ofEducation of Hebei Province (2002209).
文摘Mixture model based image segmentation method, which assumes that image pixels are independent and do not consider the position relationship between pixels, is not robust to noise and usually leads to misclassification. A new segmentation method, called multi-resolution Ganssian mixture model method, is proposed. First, an image pyramid is constructed and son-father link relationship is built between each level of pyramid. Then the mixture model segmentation method is applied to the top level. The segmentation result on the top level is passed top-down to the bottom level according to the son-father link relationship between levels. The proposed method considers not only local but also global information of image, it overcomes the effect of noise and can obtain better segmentation result. Experimental result demonstrates its effectiveness.
基金Project partially supported by NSF (No. CCR0306438) and theBoeing Company, USA
文摘We propose a high-performance path planning algorithm for automatic target tracking in the applications of real-time simulation and visualization of large-scale terrain datasets, with a large number of moving objects （such as vehicles） tracking multiple moving targets. By using a modified Dijkstra＇s algorithm, an optimal path between each vehicle-target pair over a weighted grid-presented terrain is computed and updated to eliminate the problem of local minima and losing of tracking. Then, a dynamic path re-planning strategy using multi-resolution representation of a dynamic updating region is proposed to achieve high-performance by trading-off precision for efficiency, while guaranteeing accuracy. Primary experimental results showed that our algorithm successfully achieved l0 to 96 frames per second interactive path-replanning rates during a terrain simulation scenario with 10 to 100 vehicles and multiple moving targets.
基金Program of Science and Technology Department of Sichuan Province(2022YFS0541-02)Program of Heavy Rain and Drought-flood Disasters in Plateau and Basin Key Laboratory of Sichuan Province(SCQXKJQN202121)Innovative Development Program of the China Meteorological Administration(CXFZ2021Z007)。
文摘Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topographic factors like altitude,slope,slope direction,slope variability,surface roughness,and meteorological factors like temperature and wind speed.The results of the correction demonstrated that the ensemble learning method has a considerably corrective effect and the three methods(Random Forest,AdaBoost,and Bagging)adopted in the study had similar results.The mean bias between CMPAS and 85%of automatic weather stations has dropped by more than 30%.The plateau region displays the largest accuracy increase,the winter season shows the greatest error reduction,and decreasing precipitation improves the correction outcome.Additionally,the heavy precipitation process’precision has improved to some degree.For individual stations,the revised CMPAS error fluctuation range is significantly reduced.
文摘In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different types of terrain. In this paper, an algorithm to generate random terrain data is given.
基金National Public Benefit Research Foundation of China (2008416048GYHY201006035)
文摘The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(California Meteorological Model,CALMET) with 100-m horizontal spacing was driven with outputs from the Weather Research and Forecasting(WRF) model to obtain near-surface winds for the 1-year period from 12 September 2003 to 11 September 2004.Results were compared with wind observations at four sites.Traditional statistical scores,including correlation coefficients,standard deviations(SDs) and mean absolute errors(MAEs),indicate that the wind estimates from the WRF/CALMET modeling system are produced reasonably well.The correlation coefficients are relatively large,ranging from 0.5 to 0.7 for the zonal wind component and from 0.75 to 0.85 for the meridional wind component.MAEs for wind speed range from 1.5 to 2.0 m s-1 at 10 meters above ground level(AGL) and from 2.0 to 2.5 m s-1 at 60 m AGL.MAEs for wind direction range from 30 to 40 degrees at both levels.A spectral decomposition of the time series of wind speed shows positive impacts of CALMET in improving the mesoscale winds.Moreover,combining the CALMET model with WRF significantly improves the spatial variability of the simulated wind fields.It can be concluded that the WRF/CALMET modeling system is capable of providing a detailed near-surface wind field,but the physics in the diagnostic CALMET model needs to be further improved.
文摘Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data and meteorological observations, a distributed model for calculating DSR over rugged terrain is developed. This model gives an all-sided consideration on factors influencing th a resolution of 1 km × 1 km for thDSR. Using the developed model, normals of annual DSR quantity wie Yellow River Basin was generated, with DEM data as the general characterization of terrain. Characteristics of DSR quantity influenced by geographic and topographic factors over rugged terrain were analyzed thoroughly. Results suggest that： influenced by local topographic factors, i.e. azimuth, slope and so on, and annual DSR quantity over mountainous area has a clear spatial difference; annual DSR quantity of sunny slope （or southern slope） of mountains is obviously larger than that of shady slope （or northern slope）. The calculated DSR quantity of the Yellow River Basin is provided in the same way as other kinds of spatial information and can be employed as basic geographic data for relevant studies as well.
基金Supported by the National Natural Science Foundation of China （No.40671158）, the National 863 Program of China（No.2006AA12Z224） and the Program for New Century Excellent Talents in University （No.NCET-05-0626）.
文摘The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.
文摘In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripheral national territories,little or no solar radiation data,non-satisfactory sunshine hours data,and low quality of ground observed cloud cover data create a situation in which the spatial modeling of Extraterrestrial Solar Radiation(ESR) and its ground parameterization got sufficient scope.The Digital Elevation Model (DEM) input into Geographic Information System (GIS) is a compatible tool to demonstrate the spatial distribution of ESR over the rugged terrains of the study domain.For the first time,distributed modeling of ESR is done over the rugged terrains of Pakistan,based on DEM and ArcGIS..Results clearly depict that the complex landforms profoundly disrupt the zonal distribution of ESR in Pakistan.The screening impact of topography is higher on spatial distribution of ESR in winter and considerably low in summer.The combined effect of topography and latitude is obvious.Hence,the model was further testified by plotting Rb (ratio of ESR quantity over rugged terrain against plane surface) against azimuth at different latitudes with different angled slopes.The results clearly support the strong screening effect of rugged terrain through out the country especially in Himalayas,Karakoram and Hindukush (HKH),western border mountains and Balochistan Plateau.This model can be instrumental as baseline geospatial information for scientific investigations in Pakistan,where substantial fraction of national population is living in mountainous regions.
基金the National Natural Science Foundation of China(Grant No.11471004)the Key Research and Development Program of Shaanxi Province,China(Grant No.2018SF-251)。
文摘To solve the problem that the magnetic resonance(MR)image has weak boundaries,large amount of information,and low signal-to-noise ratio,we propose an image segmentation method based on the multi-resolution Markov random field(MRMRF)model.The algorithm uses undecimated dual-tree complex wavelet transformation to transform the image into multiple scales.The transformed low-frequency scale histogram is used to improve the initial clustering center of the K-means algorithm,and then other cluster centers are selected according to the maximum distance rule to obtain the coarse-scale segmentation.The results are then segmented by the improved MRMRF model.In order to solve the problem of fuzzy edge segmentation caused by the gray level inhomogeneity of MR image segmentation under the MRMRF model,it is proposed to introduce variable weight parameters in the segmentation process of each scale.Furthermore,the final segmentation results are optimized.We name this algorithm the variable-weight multi-resolution Markov random field(VWMRMRF).The simulation and clinical MR image segmentation verification show that the VWMRMRF algorithm has high segmentation accuracy and robustness,and can accurately and stably achieve low signal-to-noise ratio,weak boundary MR image segmentation.
基金supported by the National High Technology Research and Development Program of China(863 Program, Grant No.2006AA09Z240)the National Deep-Sea Technology Project of Development and Re-search(Grant No.DYXM-115-04-02-01)
文摘In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.
基金This paper is supported by the National Natural Science Foundation ofChina (No .40344002) .
文摘A numerical method is put forward in this paper, using the boundary element method （BEM） to model 3D terrain effects on magnetotelluric （MT） surveys, Using vector integral theory and electromagnetic field boundary conditions, the boundary problem of two electromagnetic fields in the upper half space （air） and lower half space （earth medium） was transformed into two vector integral equations just related to the topography ： one magnetic equation for computing the magnetic field and the other electrical equation for computing the electrical field. The topography integral is decomposed into a series of integrals in a triangle element. For the integral in a triangle element, we suppose that the electromagnetic field in it is the stack of the electromagnetic field in the homogeneous earth and the topography response which is a constant; so the computation becomes simple, convenient and highly accurate. By decomposition and computation, each vector integral equation can be calculated by solving three linear equations that are related to the three Cartesian directions. The matrix of these linear equations is diagonally dominant and can be solved using the Symmetric Successive Over-Relaxation （SSOR） method. The apparent resistivity curve of MT on two 3D terrains calculated by BEM is shown in this paper.
基金This paper is supported by the State Key Laboratory for Image Processing & Intelligent Control (No. TKLJ9903) National Defe
文摘Augmented reality is the merging of synthetic sensory information into a user's perception of a real environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has gained more and more attention. In this paper, we mainly focus on point selection problem in terrain simplification using triangulated irregular network. Based on the analysis and comparison of traditional importance measures for each input point, we put forward a new importance measure based on local entropy. The results demonstrate that the local entropy criterion has a better performance than any traditional methods. In addition, it can effectively conquer the 'short-sight' problem associated with the traditional methods.
文摘The purpose of this work is to analyze the feasibility of using the wavelet transform in the edge detection of digital terrain models (DTM) obtained by Laser Scanner. The Haar wavelet transform and the edge detection method called Wavelet Transform Modulus Maxima (WTMM), both implemented in Matlab language, were used. In order to validate and verify the efficiency of WTMM, the edge detection of the same DTM was performed by the Roberts, Sobel-Feldman and Canny methods, chosen due to the wide use in the scientific community in the area of Image Processing and Remote Sensing. The comparison of the results showed superior performance of WTMM in terms of processing time.
文摘The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital image scanned in a cycle as the raw data.First the label rings are detected with the improved Hough transform (HT) method and followed by curve-fitting for accurate location;then the most probable window for each ping is detected with weighted neighborhood gray-level co-occurrence matrix;and finally the DTM is built by integrating the GPS data with sonar data for 3D visualization.The case of an underwater trench for immersed tube road tunnel is illustrated.
文摘An integrated hydrological model has been applied for a rural-urban catchment of the Szamos-Kraszna interfluve geographic area, using the WateRisk integrated hydrological model system. The aim of the hydrological simulations was to identify the role that the relief plays in the water coverage formation process, and to highlight the possible consequences of it on phosphorus transport processes. To support this aim, the rainfall-runoff and the one-dimensional flow routing modules have been modelled, and maximal water cover has been calculated. Measured water coverage data by remote sensing have been compared to calculated maximum water cover in several ways. Results support the existing perspective on excess water formation namely that the process is very complex, therefore, the coincidence of the locations of measured water cover with calculated maximum water cover based on the DEM （digital elevation model） and the river network is low. Analysis shows that as far as the larger depressions of the area are concerned, the error of the DEM is not high, but it is likely that at locations with small altitude differences, the error of DEM can cause larger errors. The results foreshadow the importance of the micro relief of the area on phosphorus transport.
