Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood ...Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood was produced via a two-step process utilizing boric acid(BA)and ammonium dihydrogen phosphate(ADP)as flame-retardant components,and biomass-derived furfuryl alcohol(FA)as a modifier.The acidity of BA and ADP allowed them to catalyze the polymerization of FA,which formed a cross-linked network that immobilized BA and ADP inside the wood.The addition of BA/ADP substantially delayed the time to ignition from 10 to 385 s and reduced the total heat release and total smoke release by 58.75%and 77.31%,respectively.Analysis of the pyrolysis process showed that the decomposition products of BA and ADP protected the underlying furfurylated wood and diluted combustible gases.This method significantly improved the fire retardancy and smokeless properties of furfurylated wood,providing promising prospects for its application as an engineering material.展开更多
We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effect...We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effects of varied content of silane coupling agent content and ratios of straw to poplar wood particles on particleboard prop- erties. The ratios of straw to poplar wood particles were 100：0, 85：15, 70：30 and 55：45. Silane coupling agent content was tested at three levels, 0, 5 and 10 %. The experimental panels were tested for their mechanical strength, including modulus of elasticity （MOE）, modulus of rupture （MOR）, intemal bonding （IB） and physical properties according to procedures specified in DIN 68763 （Chipboard for special purposes in building construction： concepts, requirements, testing, 1982-03, 1982）. All board properties were improved by the addition of silane cou- pling agent. The use of poplar wood particles had a positive effect on the mechanical properties of wheat straw parti- cleboard but had a negative effect on physical properties （thickness swelling and water absorption）.展开更多
To enhance mechanical properties and improve flame retardancy and smoke suppression of fast-growing poplar wood in wood applications,the wood was impregnated and modified.An organic phenolic prepolymer and inorganic s...To enhance mechanical properties and improve flame retardancy and smoke suppression of fast-growing poplar wood in wood applications,the wood was impregnated and modified.An organic phenolic prepolymer and inorganic sodium silicate was used as contrasting impregnation modifiers and wood samples were impregnated by a bionic“respiration”method with alternating positive and negative pressure.The weight percentage gain,density increase ratio,mechanical properties(bending and compressive strength and hardness),and water absorption rate of inorganic and organic-impregnated modified poplar wood(IIMPW and OIMPW,respectively)were compared and these properties in IIMPW were found to be higher than those of OIMPW with the exception of the water absorption rate which was lower than the OIMPW.This was attributed to the superior absorption of sodium silicate that also improved the impregnation,reinforcement,and dimensional stability in the IIMPW.The chemical structure,crystalline structure,internal morphology,flame retardancy,smoke suppression,and thermal stability of IIMPW and OIMPW were characterized by FT-IR,XRD,SEM,CONE,and TGA.FT-IR and XRD results showed that,although IIMPW cellulose crystallinity reduced the most,more chemical bonds were come into being in IIMPW,which explained the better physical and mechanical properties of IIMPW.Compared with OIMPW,IIMPW had better flame retardant and smoke suppression performance.展开更多
The objective of this research is to design a method for an appropriate alternative to supply poplar wood as raw material for wood and paper factories in Iran. Due to the destruction of the forests and lack of proper ...The objective of this research is to design a method for an appropriate alternative to supply poplar wood as raw material for wood and paper factories in Iran. Due to the destruction of the forests and lack of proper plantation, replacement of the forest wood by the fast growing wood is vital to satisfy all requirements of these factories. A hierarchy was used to prioritize benefits, opportunities, costs and risks （BOCR） using the Analytic Hierarchy Process （AHP） ratings approach. To evaluate the ＂control criteria＂ of the system, a control hierarchy was also created and prioritized by applying the Analytic Network Process （ANP）. A total of four major control criteria in the system are prioritized where each one controls a network structure evaluated by using ANE The final synthesis results of the system showed that internal poplar tree farming supplied by the forest product factories was the best choice among three potential alternatives （factory procurement, external procurement and mix procurement）.展开更多
We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made f...We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made from UF-bonded wheat straw （Triticum aestivum L.） combined with poplar wood as affected by silane coupling agent content and straw/poplar wood particle ratios. We manufactured one-layered particleboard panels at four different ratios of straw to poplar wood par-ticles （0%, 15%, 30% and 45% wheat straw） and silane coupling agent content at three levels of 0, 5% and 10%. Roughness measurements, average roughness （Ra）, mean peak-to-valley height （Rz）, and root mean square roughness （Rq） were measured on unsanded samples by using a fine stylus tracing technique. We obtained contact angle measurements by using a goniometer connected to a digital camera and computer sys-tem. Boards containing greater amounts of poplar particles had superior hardness compared to control samples and had lower wettability. Panels made with higher amounts of silane had lower Rq values.展开更多
The pyrolysis characteristics of residues of poplar （Populus sp.） wood were investigated using a thermogravimetric analyzer coupled with a Fourier transform infrared （TG-FTIR） spectrometer. The pyrolysis process w...The pyrolysis characteristics of residues of poplar （Populus sp.） wood were investigated using a thermogravimetric analyzer coupled with a Fourier transform infrared （TG-FTIR） spectrometer. The pyrolysis process was sub- divided into four stages at a rate of 10℃.min-1, varying from 30 to 650℃. Below 180℃, a mass loss occurred for drying and preheating the sample and the onset temperature of pyrolysis ranged between 180-260℃. A significant mass loss 3f 61.4 wt.% occurred between 260-380℃, followed by a slow and continuous mass change with lignin devolatilization. The analysis of kinetic reactions showed that the activation energy （78.29 kJ.mol-1） in the low-temperature section was much larger than that （6.40 kJ-mol-1） in the high-temperature section. The evolved gases formed by thermal degradation 3f poplar wood were simultaneously analyzed by FTIR. It was observed from the main peaks that the emissions evolved during poplar wood pyrolysis were acetic acid, carbon dioxide, carbon monoxide, methane, water, some volatile com- 3ounds of esters, alcohols and aldehydes. The emissions gradually increased with rising temperatures before a strong 3eak around 360℃ and then decreased. Most gaseous products were emitted in the 320-380℃ range, while CO2 was =ontinuously emitted in a wide range from 140-550℃.展开更多
Interfacial compatibility is a crucial factor to the performance of wood-plastic composites （WPCs）. Yet, so far, the coupling mechanisms of WPC have not been completely understood. In order to further clarify the in...Interfacial compatibility is a crucial factor to the performance of wood-plastic composites （WPCs）. Yet, so far, the coupling mechanisms of WPC have not been completely understood. In order to further clarify the interfacial coupling mechanism, the dielectric constant and dielectric loss factor of Simon poplar wood flour/polypropylene composites without additives at different wood contents were measured at oven-dry state, and parameters and thermodynamic quantities of the relaxation process were also analyzed and calculated. Consequently, an obvious relaxation process based on the reorientation of methanol groups in amorphous region of wood cell wall was observed exactly that its dielectric loss factor peak decreased with the decreasing wood content within the measured range of 50%-100%. With the trend of dielectric relaxation strength, the two changing trends both revealed that the existence of polypropylene could hinder reorientation of methanol groups. Following the decreasing wood contents, the effect of the hindrance on the dielectric properties turned obvious gradually. It elucidated that introduction of polypropylene caused the quantities of hydrogen bonds formed between each methanol group and the groups around it change. The same conclusion could be drawn from the analysis of thermodynamic quantities during the dielectric relaxation progress.展开更多
Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar...Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar is an inherent catalyst for pyrolysis.In this study,in order to investigate the influence of functionalities and pore structures of biochar on its capability for catalyzing the conversion of homologous volatiles in bio-oil,three char catalysts(600C,800C,and 800AC)produced via pyrolysis of poplar wood at 600 or 800℃or activated at 800℃,were used for catalyzing pyrolysis of homologous poplar wood at 600℃,respectively.The results indicated that the 600C catalyst was more active than 800C and 800AC for catalyzing cracking of volatiles to form more gas(yield increase by 40.2%)and aromatization of volatiles to form more light or heavy phenolics,due to its abundant oxygen-containing functionalities acting as active sites.The developed pores of the 800AC showed no such catalytic effect but could trap some volatiles and allow their further conversion via sufficient aromatization.Nevertheless,the interaction with the volatiles consumed oxygen on 600C(decrease by 50%),enhancing the aromatic degree and increasing thermal stability.The dominance of deposition of carbonaceous material of a very aromatic nature over 800C and 800AC resulted in net weight gain and blocked micropores but formed additional macropores.The in situ diffuse reflectance infrared Fourier transform spectroscopy characterization of the catalytic pyrolysis indicated superior activity of 600C for removal of -OH,while conversion of the intermediates bearing C=O was enhanced over all the char catalysts.展开更多
Computer simulation was carried out on fiber length and width for plantation-grown Chinesewhite poplar (Populus tomentosa Carr. clone) and plantation-grown poplar I-72 (P. x eurumericana (Dode)Guiner cv.). Skewness an...Computer simulation was carried out on fiber length and width for plantation-grown Chinesewhite poplar (Populus tomentosa Carr. clone) and plantation-grown poplar I-72 (P. x eurumericana (Dode)Guiner cv.). Skewness and kurtosis of measured results exhibited that distributions of the fiber length andwidth departured from normal distribution. Three-parameter Weibull density function was used in thisinvestigation and the corresponding program was written with Turbo C. The results showed that profiles ofsimulated length and width histograms were similar to ones of measured histograms, and that there was apretty good agreement between simulated and measured means of fiber length and width. There was a littleinfluence on the simulated means from seed used in random number generator and number of simulatedvariables. That indicated that the simulation was steady when the seed and the number were altered. Differenthistograms can be obtained with different values of the location, the shape, and the scale parameter correspondingto different values of the minimum, the mean, and the standard deviation for fiber length and width. Thesimulation presented here can be used as a tool for the studies on the variations in fiber morphology.展开更多
Sodium silicate modification can improve the overall performance of wood.The modification process has a great influence on the properties of modified wood.In this study,a new method was introduced to analyze the wood ...Sodium silicate modification can improve the overall performance of wood.The modification process has a great influence on the properties of modified wood.In this study,a new method was introduced to analyze the wood modification process,and the properties of modified wood were studied.Poplar wood was modified with sodium silicate by vacuum-pressure impregnation.After screening using single-factor experiments,an orthogonal experiment was carried out with solution concentration,impregnation time,impregnation pressure,and the cycle times as experimental factors.The modified poplar with the best properties was selected by fuzzy mathematics and characterized by SEM,FT-IR,XRD and TG.The results showed that some lignin and hemicellulose were removed from the wood due to the alkaline action of sodium silicate,and the orderly crystal area of poplar became disorderly,resulting in the reduction of crystallinity of the modified poplar wood.FT-IR analysis showed that sodium silicate was hydrolyzed to form polysilicic acid in wood,and structural analysis revealed the formation of Si-O-Si and Si-O-C,indicating that sodium silicate reacted with fibers on the wood cell wall.TG-DTG curves showed that the final residual mass of modified poplar wood increased from 25%to 67%,and the temperature of the maximum loss rate decreased from 343℃ to 276℃.The heat release and smoke release of modified poplar wood decreased obviously.This kind of material with high strength and fire resistance can be used in the outdoor building and indoor furniture.展开更多
Bioconversion of lignocellulose to fermentable sugars is a promising approach to produce potential bio-based energy and chemicals.Pretreatment is the key step to remove or delocalize lignin in lignocellulose,thus impr...Bioconversion of lignocellulose to fermentable sugars is a promising approach to produce potential bio-based energy and chemicals.Pretreatment is the key step to remove or delocalize lignin in lignocellulose,thus improving enzymatic saccharification efficiency.In this study,three kinds of pretreatment methods(ethanol,bisulfite and sulfate)were employed to produce substrates with various lignin contents which were subsequently subjected to biological saccharification processes.Results showed that a lower lignin content led to a higher fermentable sugar yield based on reducing sugar release for all samples.Additionally,the sulfate pretreatment improved the enzymatic saccharification efficiency in a greater extent than the others.Fourier transform infrared(FTIR)spectroscopy confirmed the structure changes during pretreatment.展开更多
Hydrothermal pretreatment of poplar wood chips was performed in an acetic acid/sodium acetate buffer medium.To characterize the structural changes of lignin in the pretreatment process,milled wood lignin(MWL)was isola...Hydrothermal pretreatment of poplar wood chips was performed in an acetic acid/sodium acetate buffer medium.To characterize the structural changes of lignin in the pretreatment process,milled wood lignin(MWL)was isolated from both the un-treated and treated poplar wood chips,and analyzed by ^(1)H-NMR,^(13)C-NMR,^(31)P-NMR,FT-IR,and GPC-MALLS.Results showed that the lignin in the pretreated wood chips had more phenolic OH groups,less aliphatic OH groups,higher molecular weight,and narrower polydispersity,in comparison with the lignin in the un-treated wood.The acetic acid-sodium acetate buffer pretreatment facilitated the removal of-OCH_(3) groups and the cleavage of the inter-unit linkages ofβ-O-4 bond in the lignin.Furthermore,the re-polymerization of lignin in the acetic acid-sodium acetate buffer pretreatment was found to be less than that in autohydrolysis.展开更多
Poplar wood,which was used as the absorption material for the solar-driven interfacial evaporation,was treated for 3 days,6 days and 9 days with the pectinase,and then was simulated for photothermal evaporation test a...Poplar wood,which was used as the absorption material for the solar-driven interfacial evaporation,was treated for 3 days,6 days and 9 days with the pectinase,and then was simulated for photothermal evaporation test at one standard solar radiation intensity(1 kW⋅m^(−2)).The effects of pectinase treatment on cell passage and water migration capacity of poplars were analyzed by the mercury intrusion porosimetry,the scanning electron microscope and fractal theory.It was found that the pit membrane and the ray parenchyma cells of poplar wood were degraded and destroyed after pectinase treatment.Compared with the untreated poplar wood,the evaporation rate of three sections of the specimen was changed.Especially the evaporation rate of radial and tangential direction was significantly increased.At the same time,based on the experimental data and fractal dimension deduction,fractal characteristics could be found in that the structure of poplars treated with pectinase.The porosity decreased with the increase of the fractal dimension in a certain range.It was shown that it is feasible to evaluate solar-driven water migration capacity by using fractal theory.展开更多
This study aims to improve the value of fast-growing wood and extend the heat-treated wood utilization using inorganic calcium carbonate(CaCO_(3))crystals via an in-situ synthesis method.CaCl_(2)and Na 2CO_(3)solution...This study aims to improve the value of fast-growing wood and extend the heat-treated wood utilization using inorganic calcium carbonate(CaCO_(3))crystals via an in-situ synthesis method.CaCl_(2)and Na 2CO_(3)solutions with a concentration ratio of 1:1 were successively introduced into the thermally modified poplar wood obtained by steam heat treatment(HT)at 200℃for 1.5 and 3 h,resulting in the in-situ synthesis of CaCO_(3)crystals inside the heat-treated wood.The filling effect was best at the concentration of 1.2 mol/L.CaCO_(3)was uniformly distributed in the cell cavities of the heat-treated wood,and some of the crystals were embedded in the fissures of the wood cell walls.The morphology of CaCO_(3)crystals was mainly spherical and rhombic polyhedral.Three main types of CaCO_(3)crystals were calcite,vaterite,and aragonite.The HT of poplar wood at 200℃resulted in degrading the chemical components of the wood cell wall.This degradation led to reduced wood mechanical properties,including the surface hardness(HD),modulus of rupture(MOR),and modulus of elasticity(MOE).After CaCO_(3)was in-situ synthesized in the heat-treated wood,the HD increased by 18.36%and 16.35%,and MOR increased by 14.64%and 8.89%,respectively.Because of the CaCO_(3)synthesization,the char residue of the 200℃heat-treated wood samples increased by 9.31%and the maximum weight loss rate decreased by 19.80%,indicating that the filling with CaCO_(3)cannot only improve the mechanical properties of the heat-treated wood but also effectively enhance its thermal stability.展开更多
The volatiles release behavior of poplar powder has been studied by TD-GC/MS online technique at different temperatures.The results show that the proportion of main harmful components was higher than that of beneficia...The volatiles release behavior of poplar powder has been studied by TD-GC/MS online technique at different temperatures.The results show that the proportion of main harmful components was higher than that of beneficial in the volatiles of poplar powder at 40℃ and 90℃,the harmful components was 1.7 times higher than beneficial components. The proportions of main beneficial and harmful components were equivalent at 60℃,while the main beneficial components was 5.42 times higher than that of harmful.Taking poplar wood powder as substrate to prepare wood powder-based composites by high-pressure no-gel molding compaction between the temperature of lignin softening point and wood materials carbonization(about 150-180℃) can present a satisfactory environmental friendliness.展开更多
基金financially supported by the Key Research and Development Program of Hunan Province,China(2023NK2038)National Natural Science Foundation of China(32201485)+2 种基金Natural Science Foundation of Hunan Province,China(2022JJ40863,2023JJ60161)Scientific Research Project of Hunan Provincial Education Department,China(21B0238,22A0177)Hunan Provincial Technical Innovation Platform and Talent Program in Science and Technology,China(2023RC3159).
文摘Furfurylated wood exhibits excellent dimensional stability and corrosion resistance,making it a promising material for constructing buildings,but it is highly flammable.Herein,flame-retardant furfurylated poplar wood was produced via a two-step process utilizing boric acid(BA)and ammonium dihydrogen phosphate(ADP)as flame-retardant components,and biomass-derived furfuryl alcohol(FA)as a modifier.The acidity of BA and ADP allowed them to catalyze the polymerization of FA,which formed a cross-linked network that immobilized BA and ADP inside the wood.The addition of BA/ADP substantially delayed the time to ignition from 10 to 385 s and reduced the total heat release and total smoke release by 58.75%and 77.31%,respectively.Analysis of the pyrolysis process showed that the decomposition products of BA and ADP protected the underlying furfurylated wood and diluted combustible gases.This method significantly improved the fire retardancy and smokeless properties of furfurylated wood,providing promising prospects for its application as an engineering material.
文摘We evaluated the potential use of amino silane coupling agent （SiNH） to improve physical and mechanical properties of UF-bonded wheat straw （Triticurn aestivum L.） poplar wood particleboard. We examined the effects of varied content of silane coupling agent content and ratios of straw to poplar wood particles on particleboard prop- erties. The ratios of straw to poplar wood particles were 100：0, 85：15, 70：30 and 55：45. Silane coupling agent content was tested at three levels, 0, 5 and 10 %. The experimental panels were tested for their mechanical strength, including modulus of elasticity （MOE）, modulus of rupture （MOR）, intemal bonding （IB） and physical properties according to procedures specified in DIN 68763 （Chipboard for special purposes in building construction： concepts, requirements, testing, 1982-03, 1982）. All board properties were improved by the addition of silane cou- pling agent. The use of poplar wood particles had a positive effect on the mechanical properties of wheat straw parti- cleboard but had a negative effect on physical properties （thickness swelling and water absorption）.
基金the Scientific Research Project of Hunan Provincial Education Department,China(21B0238)Hunan Provincial Technical Innovation Platform and Talent Program in Science and Technology,China(2019RS2040)+1 种基金National Natural Science Foundation of China(32171708)The Science and Technology Innovation Program of Hunan Province(2021RC4062).
文摘To enhance mechanical properties and improve flame retardancy and smoke suppression of fast-growing poplar wood in wood applications,the wood was impregnated and modified.An organic phenolic prepolymer and inorganic sodium silicate was used as contrasting impregnation modifiers and wood samples were impregnated by a bionic“respiration”method with alternating positive and negative pressure.The weight percentage gain,density increase ratio,mechanical properties(bending and compressive strength and hardness),and water absorption rate of inorganic and organic-impregnated modified poplar wood(IIMPW and OIMPW,respectively)were compared and these properties in IIMPW were found to be higher than those of OIMPW with the exception of the water absorption rate which was lower than the OIMPW.This was attributed to the superior absorption of sodium silicate that also improved the impregnation,reinforcement,and dimensional stability in the IIMPW.The chemical structure,crystalline structure,internal morphology,flame retardancy,smoke suppression,and thermal stability of IIMPW and OIMPW were characterized by FT-IR,XRD,SEM,CONE,and TGA.FT-IR and XRD results showed that,although IIMPW cellulose crystallinity reduced the most,more chemical bonds were come into being in IIMPW,which explained the better physical and mechanical properties of IIMPW.Compared with OIMPW,IIMPW had better flame retardant and smoke suppression performance.
文摘The objective of this research is to design a method for an appropriate alternative to supply poplar wood as raw material for wood and paper factories in Iran. Due to the destruction of the forests and lack of proper plantation, replacement of the forest wood by the fast growing wood is vital to satisfy all requirements of these factories. A hierarchy was used to prioritize benefits, opportunities, costs and risks （BOCR） using the Analytic Hierarchy Process （AHP） ratings approach. To evaluate the ＂control criteria＂ of the system, a control hierarchy was also created and prioritized by applying the Analytic Network Process （ANP）. A total of four major control criteria in the system are prioritized where each one controls a network structure evaluated by using ANE The final synthesis results of the system showed that internal poplar tree farming supplied by the forest product factories was the best choice among three potential alternatives （factory procurement, external procurement and mix procurement）.
文摘We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made from UF-bonded wheat straw （Triticum aestivum L.） combined with poplar wood as affected by silane coupling agent content and straw/poplar wood particle ratios. We manufactured one-layered particleboard panels at four different ratios of straw to poplar wood par-ticles （0%, 15%, 30% and 45% wheat straw） and silane coupling agent content at three levels of 0, 5% and 10%. Roughness measurements, average roughness （Ra）, mean peak-to-valley height （Rz）, and root mean square roughness （Rq） were measured on unsanded samples by using a fine stylus tracing technique. We obtained contact angle measurements by using a goniometer connected to a digital camera and computer sys-tem. Boards containing greater amounts of poplar particles had superior hardness compared to control samples and had lower wettability. Panels made with higher amounts of silane had lower Rq values.
基金supported by the National Natural Science Foundation of China (No. 30972309)the Doctoral Fund of the Ministry of Education of China (No. 20090014110015)
文摘The pyrolysis characteristics of residues of poplar （Populus sp.） wood were investigated using a thermogravimetric analyzer coupled with a Fourier transform infrared （TG-FTIR） spectrometer. The pyrolysis process was sub- divided into four stages at a rate of 10℃.min-1, varying from 30 to 650℃. Below 180℃, a mass loss occurred for drying and preheating the sample and the onset temperature of pyrolysis ranged between 180-260℃. A significant mass loss 3f 61.4 wt.% occurred between 260-380℃, followed by a slow and continuous mass change with lignin devolatilization. The analysis of kinetic reactions showed that the activation energy （78.29 kJ.mol-1） in the low-temperature section was much larger than that （6.40 kJ-mol-1） in the high-temperature section. The evolved gases formed by thermal degradation 3f poplar wood were simultaneously analyzed by FTIR. It was observed from the main peaks that the emissions evolved during poplar wood pyrolysis were acetic acid, carbon dioxide, carbon monoxide, methane, water, some volatile com- 3ounds of esters, alcohols and aldehydes. The emissions gradually increased with rising temperatures before a strong 3eak around 360℃ and then decreased. Most gaseous products were emitted in the 320-380℃ range, while CO2 was =ontinuously emitted in a wide range from 140-550℃.
基金funded by the National Natural Science Foundation of China (Grant No. 30871966).
文摘Interfacial compatibility is a crucial factor to the performance of wood-plastic composites （WPCs）. Yet, so far, the coupling mechanisms of WPC have not been completely understood. In order to further clarify the interfacial coupling mechanism, the dielectric constant and dielectric loss factor of Simon poplar wood flour/polypropylene composites without additives at different wood contents were measured at oven-dry state, and parameters and thermodynamic quantities of the relaxation process were also analyzed and calculated. Consequently, an obvious relaxation process based on the reorientation of methanol groups in amorphous region of wood cell wall was observed exactly that its dielectric loss factor peak decreased with the decreasing wood content within the measured range of 50%-100%. With the trend of dielectric relaxation strength, the two changing trends both revealed that the existence of polypropylene could hinder reorientation of methanol groups. Following the decreasing wood contents, the effect of the hindrance on the dielectric properties turned obvious gradually. It elucidated that introduction of polypropylene caused the quantities of hydrogen bonds formed between each methanol group and the groups around it change. The same conclusion could be drawn from the analysis of thermodynamic quantities during the dielectric relaxation progress.
基金supported by the National Natural Science Foundation of China(51876080)the Program for Taishan Scholars of the Shandong Province Government。
文摘Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar is an inherent catalyst for pyrolysis.In this study,in order to investigate the influence of functionalities and pore structures of biochar on its capability for catalyzing the conversion of homologous volatiles in bio-oil,three char catalysts(600C,800C,and 800AC)produced via pyrolysis of poplar wood at 600 or 800℃or activated at 800℃,were used for catalyzing pyrolysis of homologous poplar wood at 600℃,respectively.The results indicated that the 600C catalyst was more active than 800C and 800AC for catalyzing cracking of volatiles to form more gas(yield increase by 40.2%)and aromatization of volatiles to form more light or heavy phenolics,due to its abundant oxygen-containing functionalities acting as active sites.The developed pores of the 800AC showed no such catalytic effect but could trap some volatiles and allow their further conversion via sufficient aromatization.Nevertheless,the interaction with the volatiles consumed oxygen on 600C(decrease by 50%),enhancing the aromatic degree and increasing thermal stability.The dominance of deposition of carbonaceous material of a very aromatic nature over 800C and 800AC resulted in net weight gain and blocked micropores but formed additional macropores.The in situ diffuse reflectance infrared Fourier transform spectroscopy characterization of the catalytic pyrolysis indicated superior activity of 600C for removal of -OH,while conversion of the intermediates bearing C=O was enhanced over all the char catalysts.
文摘Computer simulation was carried out on fiber length and width for plantation-grown Chinesewhite poplar (Populus tomentosa Carr. clone) and plantation-grown poplar I-72 (P. x eurumericana (Dode)Guiner cv.). Skewness and kurtosis of measured results exhibited that distributions of the fiber length andwidth departured from normal distribution. Three-parameter Weibull density function was used in thisinvestigation and the corresponding program was written with Turbo C. The results showed that profiles ofsimulated length and width histograms were similar to ones of measured histograms, and that there was apretty good agreement between simulated and measured means of fiber length and width. There was a littleinfluence on the simulated means from seed used in random number generator and number of simulatedvariables. That indicated that the simulation was steady when the seed and the number were altered. Differenthistograms can be obtained with different values of the location, the shape, and the scale parameter correspondingto different values of the minimum, the mean, and the standard deviation for fiber length and width. Thesimulation presented here can be used as a tool for the studies on the variations in fiber morphology.
基金This work was financially supported by National Natural Science Foundation of China(32201485)Natural Science Foundation of Hunan Province,China(2022JJ40863)+1 种基金Scientific Research Project of Hunan Provincial Education Department,China(21B0238)The Science and Technology Innovation Program of Hunan Province(2021RC4062).
文摘Sodium silicate modification can improve the overall performance of wood.The modification process has a great influence on the properties of modified wood.In this study,a new method was introduced to analyze the wood modification process,and the properties of modified wood were studied.Poplar wood was modified with sodium silicate by vacuum-pressure impregnation.After screening using single-factor experiments,an orthogonal experiment was carried out with solution concentration,impregnation time,impregnation pressure,and the cycle times as experimental factors.The modified poplar with the best properties was selected by fuzzy mathematics and characterized by SEM,FT-IR,XRD and TG.The results showed that some lignin and hemicellulose were removed from the wood due to the alkaline action of sodium silicate,and the orderly crystal area of poplar became disorderly,resulting in the reduction of crystallinity of the modified poplar wood.FT-IR analysis showed that sodium silicate was hydrolyzed to form polysilicic acid in wood,and structural analysis revealed the formation of Si-O-Si and Si-O-C,indicating that sodium silicate reacted with fibers on the wood cell wall.TG-DTG curves showed that the final residual mass of modified poplar wood increased from 25%to 67%,and the temperature of the maximum loss rate decreased from 343℃ to 276℃.The heat release and smoke release of modified poplar wood decreased obviously.This kind of material with high strength and fire resistance can be used in the outdoor building and indoor furniture.
基金support from National Training Programs of Innovation and Entrepreneurship for Undergraduates(Qilu University of Technology)National Science Foundation of China(Grant Nos.31670584,31500490).
文摘Bioconversion of lignocellulose to fermentable sugars is a promising approach to produce potential bio-based energy and chemicals.Pretreatment is the key step to remove or delocalize lignin in lignocellulose,thus improving enzymatic saccharification efficiency.In this study,three kinds of pretreatment methods(ethanol,bisulfite and sulfate)were employed to produce substrates with various lignin contents which were subsequently subjected to biological saccharification processes.Results showed that a lower lignin content led to a higher fermentable sugar yield based on reducing sugar release for all samples.Additionally,the sulfate pretreatment improved the enzymatic saccharification efficiency in a greater extent than the others.Fourier transform infrared(FTIR)spectroscopy confirmed the structure changes during pretreatment.
基金support from the National Natural Science Foundation of China (31540009 and 31370581)the Yellow River Mouth Scholar Program (DYRC20120105).
文摘Hydrothermal pretreatment of poplar wood chips was performed in an acetic acid/sodium acetate buffer medium.To characterize the structural changes of lignin in the pretreatment process,milled wood lignin(MWL)was isolated from both the un-treated and treated poplar wood chips,and analyzed by ^(1)H-NMR,^(13)C-NMR,^(31)P-NMR,FT-IR,and GPC-MALLS.Results showed that the lignin in the pretreated wood chips had more phenolic OH groups,less aliphatic OH groups,higher molecular weight,and narrower polydispersity,in comparison with the lignin in the un-treated wood.The acetic acid-sodium acetate buffer pretreatment facilitated the removal of-OCH_(3) groups and the cleavage of the inter-unit linkages ofβ-O-4 bond in the lignin.Furthermore,the re-polymerization of lignin in the acetic acid-sodium acetate buffer pretreatment was found to be less than that in autohydrolysis.
基金The authors’funding is supported by the Fundamental Research Funds Jiangsu Vocational College of Agriculture and Forestry(2021KJ20).
文摘Poplar wood,which was used as the absorption material for the solar-driven interfacial evaporation,was treated for 3 days,6 days and 9 days with the pectinase,and then was simulated for photothermal evaporation test at one standard solar radiation intensity(1 kW⋅m^(−2)).The effects of pectinase treatment on cell passage and water migration capacity of poplars were analyzed by the mercury intrusion porosimetry,the scanning electron microscope and fractal theory.It was found that the pit membrane and the ray parenchyma cells of poplar wood were degraded and destroyed after pectinase treatment.Compared with the untreated poplar wood,the evaporation rate of three sections of the specimen was changed.Especially the evaporation rate of radial and tangential direction was significantly increased.At the same time,based on the experimental data and fractal dimension deduction,fractal characteristics could be found in that the structure of poplars treated with pectinase.The porosity decreased with the increase of the fractal dimension in a certain range.It was shown that it is feasible to evaluate solar-driven water migration capacity by using fractal theory.
基金funded by“Natural Science Foundation of Anhui Province,Grant No.2008085QC130”.
文摘This study aims to improve the value of fast-growing wood and extend the heat-treated wood utilization using inorganic calcium carbonate(CaCO_(3))crystals via an in-situ synthesis method.CaCl_(2)and Na 2CO_(3)solutions with a concentration ratio of 1:1 were successively introduced into the thermally modified poplar wood obtained by steam heat treatment(HT)at 200℃for 1.5 and 3 h,resulting in the in-situ synthesis of CaCO_(3)crystals inside the heat-treated wood.The filling effect was best at the concentration of 1.2 mol/L.CaCO_(3)was uniformly distributed in the cell cavities of the heat-treated wood,and some of the crystals were embedded in the fissures of the wood cell walls.The morphology of CaCO_(3)crystals was mainly spherical and rhombic polyhedral.Three main types of CaCO_(3)crystals were calcite,vaterite,and aragonite.The HT of poplar wood at 200℃resulted in degrading the chemical components of the wood cell wall.This degradation led to reduced wood mechanical properties,including the surface hardness(HD),modulus of rupture(MOR),and modulus of elasticity(MOE).After CaCO_(3)was in-situ synthesized in the heat-treated wood,the HD increased by 18.36%and 16.35%,and MOR increased by 14.64%and 8.89%,respectively.Because of the CaCO_(3)synthesization,the char residue of the 200℃heat-treated wood samples increased by 9.31%and the maximum weight loss rate decreased by 19.80%,indicating that the filling with CaCO_(3)cannot only improve the mechanical properties of the heat-treated wood but also effectively enhance its thermal stability.
文摘The volatiles release behavior of poplar powder has been studied by TD-GC/MS online technique at different temperatures.The results show that the proportion of main harmful components was higher than that of beneficial in the volatiles of poplar powder at 40℃ and 90℃,the harmful components was 1.7 times higher than beneficial components. The proportions of main beneficial and harmful components were equivalent at 60℃,while the main beneficial components was 5.42 times higher than that of harmful.Taking poplar wood powder as substrate to prepare wood powder-based composites by high-pressure no-gel molding compaction between the temperature of lignin softening point and wood materials carbonization(about 150-180℃) can present a satisfactory environmental friendliness.
