Aerocapture is one of the key technologies for low-cost transportation,with high demands of autonomy,accuracy,and robustness of guidance and control,due to its high reliability requirements for only one chance of tryi...Aerocapture is one of the key technologies for low-cost transportation,with high demands of autonomy,accuracy,and robustness of guidance and control,due to its high reliability requirements for only one chance of trying.A unified numerical predictor-corrector guidance method based on characteristic models for aerocapture is proposed.The numerical predictor-corrector guidance method is used to achieve autonomy and high accuracy,and the characteristic model control method is introduced to achieve robustness.At the same time,by transforming path constraints,characteristic model equations including apogee deviation and altitude differentiation are established.Based on the characteristic model equations,a unified guidance law which can satisfy path constraints and guidance objectives simultaneously is designed.In guidance problems,guidance deviation is not directly obtained from the output of the dynamics at present,but is calculated through integral and algebraic equations.Therefore,the method of directly discretizing differential equations cannot be used to establish characteristic models,which brings great difficulty to characteristic modeling.A method for characteristic modeling of guidance problems is proposed,and convergence analysis of the proposed guidance law is also provided.Finally,a joint numerical simulation of guidance and control considering navigation deviation and various uncertainties is conducted to verify the effectiveness of the proposed method.The proposed unified method can be extended to general aerodynamic entry guidance designs,providing theoretical and methodological support for them.展开更多
Although predictor-corrector methods have been extensively applied,they might not meet the requirements of practical applications and engineering tasks,particularly when high accuracy and efficiency are necessary.A no...Although predictor-corrector methods have been extensively applied,they might not meet the requirements of practical applications and engineering tasks,particularly when high accuracy and efficiency are necessary.A novel class of correctors based on feedback-accelerated Picard iteration(FAPI)is proposed to further enhance computational performance.With optimal feedback terms that do not require inversion of matrices,significantly faster convergence speed and higher numerical accuracy are achieved by these correctors compared with their counterparts;however,the computational complexities are comparably low.These advantages enable nonlinear engineering problems to be solved quickly and accurately,even with rough initial guesses from elementary predictors.The proposed method offers flexibility,enabling the use of the generated correctors for either bulk processing of collocation nodes in a domain or successive corrections of a single node in a finite difference approach.In our method,the functional formulas of FAPI are discretized into numerical forms using the collocation approach.These collocated iteration formulas can directly solve nonlinear problems,but they may require significant computational resources because of the manipulation of high-dimensionalmatrices.To address this,the collocated iteration formulas are further converted into finite difference forms,enabling the design of lightweight predictor-corrector algorithms for real-time computation.The generality of the proposed method is illustrated by deriving new correctors for three commonly employed finite-difference approaches:the modified Euler approach,the Adams-Bashforth-Moulton approach,and the implicit Runge-Kutta approach.Subsequently,the updated approaches are tested in solving strongly nonlinear problems,including the Matthieu equation,the Duffing equation,and the low-earth-orbit tracking problem.The numerical findings confirm the computational accuracy and efficiency of the derived predictor-corrector algorithms.展开更多
The energy norm convergence rate of the finite element solution of the heat equation is reduced by the time-regularity of the exact solution. This paper presents an adaptive finite element treatment of time-dependent ...The energy norm convergence rate of the finite element solution of the heat equation is reduced by the time-regularity of the exact solution. This paper presents an adaptive finite element treatment of time-dependent singularities on the one-dimensional heat equation. The method is based on a Fourier decomposition of the solution and an extraction formula of the coefficients of the singularities coupled with a predictor-corrector algorithm. The method recovers the optimal convergence rate of the finite element method on a quasi-uniform mesh refinement. Numerical results are carried out to show the efficiency of the method.展开更多
A globally convergent infeasible-interior-point predictor-corrector algorithm is presented for the second-order cone programming （SOCP） by using the Alizadeh- Haeberly-Overton （AHO） search direction. This algorith...A globally convergent infeasible-interior-point predictor-corrector algorithm is presented for the second-order cone programming （SOCP） by using the Alizadeh- Haeberly-Overton （AHO） search direction. This algorithm does not require the feasibility of the initial points and iteration points. Under suitable assumptions, it is shown that the algorithm can find an -approximate solution of an SOCP in at most O（√n ln（ε0/ε）） iterations. The iteration-complexity bound of our algorithm is almost the same as the best known bound of feasible interior point algorithms for the SOCP.展开更多
This article presents a polynomial predictor-corrector interior-point algorithm for convex quadratic programming based on a modified predictor-corrector interior-point algorithm. In this algorithm, there is only one c...This article presents a polynomial predictor-corrector interior-point algorithm for convex quadratic programming based on a modified predictor-corrector interior-point algorithm. In this algorithm, there is only one corrector step after each predictor step, where Step 2 is a predictor step and Step 4 is a corrector step in the algorithm. In the algorithm, the predictor step decreases the dual gap as much as possible in a wider neighborhood of the central path and the corrector step draws iteration points back to a narrower neighborhood and make a reduction for the dual gap. It is shown that the algorithm has O（√nL） iteration complexity which is the best result for convex quadratic programming so far.展开更多
A three-dimensional （3D） predictor-corrector finite difference method for standing wave is developed. It is applied to solve the 3D nonlinear potential flow equa- tions with a free surface. The 3D irregular tank is ...A three-dimensional （3D） predictor-corrector finite difference method for standing wave is developed. It is applied to solve the 3D nonlinear potential flow equa- tions with a free surface. The 3D irregular tank is mapped onto a fixed cubic tank through the proper coordinate transform schemes. The cubic tank is distributed by the staggered meshgrid, and the staggered meshgrid is used to denote the variables of the flow field. The predictor-corrector finite difference method is given to develop the difference equa- tions of the dynamic boundary equation and kinematic boundary equation. Experimental results show that, using the finite difference method of the predictor-corrector scheme, the numerical solutions agree well with the published results. The wave profiles of the standing wave with different amplitudes and wave lengths are studied. The numerical solutions are also analyzed and presented graphically.展开更多
Based on the ideas of infeasible interior-point methods and predictor-corrector algorithms, two interior-point predictor-corrector algorithms for the second-order cone programming （SOCP） are presented. The two algor...Based on the ideas of infeasible interior-point methods and predictor-corrector algorithms, two interior-point predictor-corrector algorithms for the second-order cone programming （SOCP） are presented. The two algorithms use the Newton direction and the Euler direction as the predictor directions, respectively. The corrector directions belong to the category of the Alizadeh-Haeberly-Overton （AHO） directions. These algorithms are suitable to the cases of feasible and infeasible interior iterative points. A simpler neighborhood of the central path for the SOCP is proposed, which is the pivotal difference from other interior-point predictor-corrector algorithms. Under some assumptions, the algorithms possess the global, linear, and quadratic convergence. The complexity bound O（rln（εo/ε）） is obtained, where r denotes the number of the second-order cones in the SOCP problem. The numerical results show that the proposed algorithms are effective.展开更多
The numerical solution of large scale multi-dimensional convection diffusion equations often requires efficient parallel algorithms.In this work,we consider the extension of a recently proposed non-overlapping domain ...The numerical solution of large scale multi-dimensional convection diffusion equations often requires efficient parallel algorithms.In this work,we consider the extension of a recently proposed non-overlapping domain decomposition method for two dimensional time dependent convection diffusion equations with variable coefficients. By combining predictor-corrector technique,modified upwind differences with explicitimplicit coupling,the method under consideration provides intrinsic parallelism while maintaining good stability and accuracy.Moreover,for multi-dimensional problems, the method can be readily implemented on a multi-processor system and does not have the limitation on the choice of subdomains required by some other similar predictor-corrector or stabilized schemes.These properties of the method are demonstrated in this work through both rigorous mathematical analysis and numerical experiments.展开更多
We present the new predictor-corrector methods for systems of nonlinear differential equations, based on the method of exponential time differencing. We compare the present schemes with the explicit multistep exponent...We present the new predictor-corrector methods for systems of nonlinear differential equations, based on the method of exponential time differencing. We compare the present schemes with the explicit multistep exponential time differencing and Adams–Bashforth–Moulton method. The numerical results show that the schemes are more accurate and more efficient than Adams predictor-corrector method. The exponential time differencing method has been developed and perfected by the present studies.展开更多
A finite volume element predictor-corrector method for a class of nonlinear parabolic system of equations is presented and analyzed. Suboptimal L^2 error estimate for the finite volume element predictor-corrector meth...A finite volume element predictor-corrector method for a class of nonlinear parabolic system of equations is presented and analyzed. Suboptimal L^2 error estimate for the finite volume element predictor-corrector method is derived. A numerical experiment shows that the numerical results are consistent with theoretical analysis.展开更多
Direct dynamics simulations are a useful and general approach for studying the atomistic properties of complex chemical systems because they do not require fitting an analytic potential energy function.Hessian-based p...Direct dynamics simulations are a useful and general approach for studying the atomistic properties of complex chemical systems because they do not require fitting an analytic potential energy function.Hessian-based predictor-corrector integrators are a widely used approach for calculating the trajectories of moving atoms in direct dynamics simulations.We employ a monodromy matrix to propose a tool for evaluating the accuracy of integrators in the trajectory calculation.We choose a general velocity Verlet as a different object.We also simulate molecular with hydrogen(CO_2) and molecular with hydrogen(H_2O) motions.Comparing the eigenvalues of monodromy matrix,many simulations show that Hessian-based predictor-corrector integrators perform well for Hessian updates and non-Hessian updates.Hessian-based predictor-corrector integrator with Hessian update has a strong performance in the H_2O simulations.Hessian-based predictor-corrector integrator with Hessian update has a strong performance when the integrating step of the velocity Verlet approach is tripled for the predicting step.In the CO_2 simulations,a strong performance occurs when the integrating step is a multiple of five.展开更多
The simplified Newton method, at the expense of fast convergence, reduces the work required by Newton method by reusing the initial Jacobian matrix. The composite Newton method attempts to balance the trade-off betwee...The simplified Newton method, at the expense of fast convergence, reduces the work required by Newton method by reusing the initial Jacobian matrix. The composite Newton method attempts to balance the trade-off between expense and fast convergence by composing one Newton step with one simplified Newton step. Recently, Mehrotra suggested a predictor-corrector variant of primal-dual interior point method for linear programming. It is currently the interiorpoint method of the choice for linear programming. In this work we propose a predictor-corrector interior-point algorithm for convex quadratic programming. It is proved that the algorithm is equivalent to a level-1 perturbed composite Newton method. Computations in the algorithm do not require that the initial primal and dual points be feasible. Numerical experiments are made.展开更多
A new class of generalized mixed implicit quasi-equilibrium problems （GMIQEP） with four-functions is introduced and studied. The new class of equilibrium problems includes many known generalized equilibrium problems...A new class of generalized mixed implicit quasi-equilibrium problems （GMIQEP） with four-functions is introduced and studied. The new class of equilibrium problems includes many known generalized equilibrium problems and generalized mixed implicit quasi-variational inequality problems as many special cases. By employing the auxiliary principle technique, some predictor-corrector iterative algorithms for solving the GMIQEP are suggested and analyzed. The convergence of the suggested algorithm only requires the continuity and the partially relaxed implicit strong monotonicity of the mappings展开更多
It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of t...It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of the recent variant of Mehrotra＇s second order algorithm for linear optimijation.It is shown that the iteration-complexity bound of the algorithm is O（4κ ＋ 3）√14κ ＋ 5 nlog（x0）Ts0/ε,which is similar to that of the corresponding algorithm for linear optimization.展开更多
In this paper, we present and analyze modified families of predictor-corrector iterative methods for finding simple zeros of univariate nonlinear equations, permitting near the root. The main advantage of our methods ...In this paper, we present and analyze modified families of predictor-corrector iterative methods for finding simple zeros of univariate nonlinear equations, permitting near the root. The main advantage of our methods is that they perform better and moreover, have the same efficiency indices as that of existing multipoint iterative methods. Furthermore, the convergence analysis of the new methods is discussed and several examples are given to illustrate their efficiency.展开更多
A split-step second-order predictor-corrector method for space-fractional reaction-diffusion equations with nonhomogeneous boundary conditions is presented and analyzed for the stability and convergence.The matrix tra...A split-step second-order predictor-corrector method for space-fractional reaction-diffusion equations with nonhomogeneous boundary conditions is presented and analyzed for the stability and convergence.The matrix transfer technique is used for spatial discretization of the problem.The method is shown to be unconditionally stable and second-order convergent.Numerical experiments are performed to confirm the stability and secondorder convergence of the method.The split-step predictor-corrector method is also compared with an IMEX predictor-corrector method which is found to incur oscillatory behavior for some time steps.Our method is seen to produce reliable and oscillatioresults for any time step when implemented on numerical examples with nonsmooth initial data.We also present a priori reliability constraint for the IMEX predictor-corrector method to avoid unwanted oscillations and show its validity numerically.展开更多
EDF R＆D is developing a new calculation scheme based on the transport-Simplified Pn （SPn） approach. The lattice code used is the deterministic code APOLLO2, developed at CEA. The core code is the code COCAGNE, deve...EDF R＆D is developing a new calculation scheme based on the transport-Simplified Pn （SPn） approach. The lattice code used is the deterministic code APOLLO2, developed at CEA. The core code is the code COCAGNE, developed at EDF R＆D. The latter can take advantage of a microscopic depletion solver expected to improve the treatment of spectral history effects. However, the direct use of the microscopic depletion solver is computationally very intensive because very small evolution steps （typically 100 MWd/t） are needed to reach a good accuracy, which is not always compatible with industrial applications. In order to reduce the calculation time associated with the use of the microscopic depletion solver, a predictor-corrector scheme has been implemented within COCAGNE. It enables the use of larger evolution steps, up to 1000 MWd/t. Tests show that the predictor-corrector procedure gives fairly accurate results while significantly reducing the calculation time.展开更多
This research delves into an intricate exploration offluid dynamics within heat transfer systems,with a specific focus on enhancing our understanding and improving system efficiency.Employing a sophisticated mathemati...This research delves into an intricate exploration offluid dynamics within heat transfer systems,with a specific focus on enhancing our understanding and improving system efficiency.Employing a sophisticated mathematical model,the study incorporates micropolarfluid dynamics,micro rotational effects,laminarflow characterized by the Darcy-Forchheimer model,inertia effects,and chemical reactions within a heat transfer system featuring boundary layer complexities.The mathematical framework consists of partial differential equations(PDEs),and the study utilizes advanced numerical techniques,including the(PC4-FDM)Predictor-Corrector Finite Difference Method and the shooting method,to solve these govern-ing equations.The inclusion of quantized mesh points and analysis of convergence using 4th orderfinite difference methods enhances the precision of the obtained solutions.Various param-eters are scrutinized to draw meaningful insights.The heterogeneous parameter reveals an increasing trend influid concentration,while the homogeneous parameter indicates a collision effect leading to a decrease influid concentration.The Eckert number,associated with viscous dissipation,exhibits a correlation with decreasedfluid temperature and increasedfluid velocity.Micro rotation parameters suggest a parallel increase influid velocity and a marginal decrease influid temperature.Notably,the Darcy-Forchheimer parameter,reflective of inertial effects,showcases an increase influid temperature and decrease in velocity in the convection system.Highlighting the industrial implications,the study underscores the significance of convection heat transfer systems in the context of industrialization.Thefindings offer valuable insights for optimizing heating and cooling processes in diverse industrial applications,ranging from power plants to waste heat recovery units and pharmaceutical industries.展开更多
基金The National Key R&D Program of China(2018YFA0703800)。
文摘Aerocapture is one of the key technologies for low-cost transportation,with high demands of autonomy,accuracy,and robustness of guidance and control,due to its high reliability requirements for only one chance of trying.A unified numerical predictor-corrector guidance method based on characteristic models for aerocapture is proposed.The numerical predictor-corrector guidance method is used to achieve autonomy and high accuracy,and the characteristic model control method is introduced to achieve robustness.At the same time,by transforming path constraints,characteristic model equations including apogee deviation and altitude differentiation are established.Based on the characteristic model equations,a unified guidance law which can satisfy path constraints and guidance objectives simultaneously is designed.In guidance problems,guidance deviation is not directly obtained from the output of the dynamics at present,but is calculated through integral and algebraic equations.Therefore,the method of directly discretizing differential equations cannot be used to establish characteristic models,which brings great difficulty to characteristic modeling.A method for characteristic modeling of guidance problems is proposed,and convergence analysis of the proposed guidance law is also provided.Finally,a joint numerical simulation of guidance and control considering navigation deviation and various uncertainties is conducted to verify the effectiveness of the proposed method.The proposed unified method can be extended to general aerodynamic entry guidance designs,providing theoretical and methodological support for them.
基金work is supported by the Fundamental Research Funds for the Central Universities(No.3102019HTQD014)of Northwestern Polytechnical UniversityFunding of National Key Laboratory of Astronautical Flight DynamicsYoung Talent Support Project of Shaanxi State.
文摘Although predictor-corrector methods have been extensively applied,they might not meet the requirements of practical applications and engineering tasks,particularly when high accuracy and efficiency are necessary.A novel class of correctors based on feedback-accelerated Picard iteration(FAPI)is proposed to further enhance computational performance.With optimal feedback terms that do not require inversion of matrices,significantly faster convergence speed and higher numerical accuracy are achieved by these correctors compared with their counterparts;however,the computational complexities are comparably low.These advantages enable nonlinear engineering problems to be solved quickly and accurately,even with rough initial guesses from elementary predictors.The proposed method offers flexibility,enabling the use of the generated correctors for either bulk processing of collocation nodes in a domain or successive corrections of a single node in a finite difference approach.In our method,the functional formulas of FAPI are discretized into numerical forms using the collocation approach.These collocated iteration formulas can directly solve nonlinear problems,but they may require significant computational resources because of the manipulation of high-dimensionalmatrices.To address this,the collocated iteration formulas are further converted into finite difference forms,enabling the design of lightweight predictor-corrector algorithms for real-time computation.The generality of the proposed method is illustrated by deriving new correctors for three commonly employed finite-difference approaches:the modified Euler approach,the Adams-Bashforth-Moulton approach,and the implicit Runge-Kutta approach.Subsequently,the updated approaches are tested in solving strongly nonlinear problems,including the Matthieu equation,the Duffing equation,and the low-earth-orbit tracking problem.The numerical findings confirm the computational accuracy and efficiency of the derived predictor-corrector algorithms.
文摘The energy norm convergence rate of the finite element solution of the heat equation is reduced by the time-regularity of the exact solution. This paper presents an adaptive finite element treatment of time-dependent singularities on the one-dimensional heat equation. The method is based on a Fourier decomposition of the solution and an extraction formula of the coefficients of the singularities coupled with a predictor-corrector algorithm. The method recovers the optimal convergence rate of the finite element method on a quasi-uniform mesh refinement. Numerical results are carried out to show the efficiency of the method.
基金the National Science Foundation(60574075, 60674108)
文摘A globally convergent infeasible-interior-point predictor-corrector algorithm is presented for the second-order cone programming （SOCP） by using the Alizadeh- Haeberly-Overton （AHO） search direction. This algorithm does not require the feasibility of the initial points and iteration points. Under suitable assumptions, it is shown that the algorithm can find an -approximate solution of an SOCP in at most O（√n ln（ε0/ε）） iterations. The iteration-complexity bound of our algorithm is almost the same as the best known bound of feasible interior point algorithms for the SOCP.
基金Project supported by the National Science Foundation of China (60574071) the Foundation for University Key Teacher by the Ministry of Education.
文摘This article presents a polynomial predictor-corrector interior-point algorithm for convex quadratic programming based on a modified predictor-corrector interior-point algorithm. In this algorithm, there is only one corrector step after each predictor step, where Step 2 is a predictor step and Step 4 is a corrector step in the algorithm. In the algorithm, the predictor step decreases the dual gap as much as possible in a wider neighborhood of the central path and the corrector step draws iteration points back to a narrower neighborhood and make a reduction for the dual gap. It is shown that the algorithm has O（√nL） iteration complexity which is the best result for convex quadratic programming so far.
基金supported by the Yunnan Provincial Applied Basic Research Program of China(No. KKSY201207019)
文摘A three-dimensional （3D） predictor-corrector finite difference method for standing wave is developed. It is applied to solve the 3D nonlinear potential flow equa- tions with a free surface. The 3D irregular tank is mapped onto a fixed cubic tank through the proper coordinate transform schemes. The cubic tank is distributed by the staggered meshgrid, and the staggered meshgrid is used to denote the variables of the flow field. The predictor-corrector finite difference method is given to develop the difference equa- tions of the dynamic boundary equation and kinematic boundary equation. Experimental results show that, using the finite difference method of the predictor-corrector scheme, the numerical solutions agree well with the published results. The wave profiles of the standing wave with different amplitudes and wave lengths are studied. The numerical solutions are also analyzed and presented graphically.
基金supported by the National Natural Science Foundation of China (Nos. 71061002 and 11071158)the Natural Science Foundation of Guangxi Province of China (Nos. 0832052 and 2010GXNSFB013047)
文摘Based on the ideas of infeasible interior-point methods and predictor-corrector algorithms, two interior-point predictor-corrector algorithms for the second-order cone programming （SOCP） are presented. The two algorithms use the Newton direction and the Euler direction as the predictor directions, respectively. The corrector directions belong to the category of the Alizadeh-Haeberly-Overton （AHO） directions. These algorithms are suitable to the cases of feasible and infeasible interior iterative points. A simpler neighborhood of the central path for the SOCP is proposed, which is the pivotal difference from other interior-point predictor-corrector algorithms. Under some assumptions, the algorithms possess the global, linear, and quadratic convergence. The complexity bound O（rln（εo/ε）） is obtained, where r denotes the number of the second-order cones in the SOCP problem. The numerical results show that the proposed algorithms are effective.
基金the National Natural Science Foundation of China(No.10571017)supported in part by the National Natural Science Foundation of China(No.60533020)supported in part by NSF DMS 0712744
文摘The numerical solution of large scale multi-dimensional convection diffusion equations often requires efficient parallel algorithms.In this work,we consider the extension of a recently proposed non-overlapping domain decomposition method for two dimensional time dependent convection diffusion equations with variable coefficients. By combining predictor-corrector technique,modified upwind differences with explicitimplicit coupling,the method under consideration provides intrinsic parallelism while maintaining good stability and accuracy.Moreover,for multi-dimensional problems, the method can be readily implemented on a multi-processor system and does not have the limitation on the choice of subdomains required by some other similar predictor-corrector or stabilized schemes.These properties of the method are demonstrated in this work through both rigorous mathematical analysis and numerical experiments.
基金The project supported by National Natural Science Foundation of China under Grant No.19902002
文摘We present the new predictor-corrector methods for systems of nonlinear differential equations, based on the method of exponential time differencing. We compare the present schemes with the explicit multistep exponential time differencing and Adams–Bashforth–Moulton method. The numerical results show that the schemes are more accurate and more efficient than Adams predictor-corrector method. The exponential time differencing method has been developed and perfected by the present studies.
基金The Major State Research Program (G1999030803) of China and the NNSF (G10271066, 19972023) of China.
文摘A finite volume element predictor-corrector method for a class of nonlinear parabolic system of equations is presented and analyzed. Suboptimal L^2 error estimate for the finite volume element predictor-corrector method is derived. A numerical experiment shows that the numerical results are consistent with theoretical analysis.
基金Project(2016JJ2029)supported by Hunan Provincial Natural Science Foundation of ChinaProject(2016WLZC014)supported by the Open Research Fund of Hunan Provincial Key Laboratory of Network Investigational TechnologyProject(2015HNWLFZ059)supported by the Open Research Fund of Key Laboratory of Network Crime Investigation of Hunan Provincial Colleges,China
文摘Direct dynamics simulations are a useful and general approach for studying the atomistic properties of complex chemical systems because they do not require fitting an analytic potential energy function.Hessian-based predictor-corrector integrators are a widely used approach for calculating the trajectories of moving atoms in direct dynamics simulations.We employ a monodromy matrix to propose a tool for evaluating the accuracy of integrators in the trajectory calculation.We choose a general velocity Verlet as a different object.We also simulate molecular with hydrogen(CO_2) and molecular with hydrogen(H_2O) motions.Comparing the eigenvalues of monodromy matrix,many simulations show that Hessian-based predictor-corrector integrators perform well for Hessian updates and non-Hessian updates.Hessian-based predictor-corrector integrator with Hessian update has a strong performance in the H_2O simulations.Hessian-based predictor-corrector integrator with Hessian update has a strong performance when the integrating step of the velocity Verlet approach is tripled for the predicting step.In the CO_2 simulations,a strong performance occurs when the integrating step is a multiple of five.
文摘The simplified Newton method, at the expense of fast convergence, reduces the work required by Newton method by reusing the initial Jacobian matrix. The composite Newton method attempts to balance the trade-off between expense and fast convergence by composing one Newton step with one simplified Newton step. Recently, Mehrotra suggested a predictor-corrector variant of primal-dual interior point method for linear programming. It is currently the interiorpoint method of the choice for linear programming. In this work we propose a predictor-corrector interior-point algorithm for convex quadratic programming. It is proved that the algorithm is equivalent to a level-1 perturbed composite Newton method. Computations in the algorithm do not require that the initial primal and dual points be feasible. Numerical experiments are made.
基金Project supported by the Natural Science Foundation of Sichuan Educational Commission (No.2003A081)
文摘A new class of generalized mixed implicit quasi-equilibrium problems （GMIQEP） with four-functions is introduced and studied. The new class of equilibrium problems includes many known generalized equilibrium problems and generalized mixed implicit quasi-variational inequality problems as many special cases. By employing the auxiliary principle technique, some predictor-corrector iterative algorithms for solving the GMIQEP are suggested and analyzed. The convergence of the suggested algorithm only requires the continuity and the partially relaxed implicit strong monotonicity of the mappings
基金supported by the Natural Science Foundation of Hubei Province of China(2008CDZ047)
文摘It has been shown in various papers that most interior-point algorithms for linear optimization and their analysis can be generalized to P_＊（κ） linear complementarity problems.This paper presents an extension of the recent variant of Mehrotra＇s second order algorithm for linear optimijation.It is shown that the iteration-complexity bound of the algorithm is O（4κ ＋ 3）√14κ ＋ 5 nlog（x0）Ts0/ε,which is similar to that of the corresponding algorithm for linear optimization.
文摘In this paper, we present and analyze modified families of predictor-corrector iterative methods for finding simple zeros of univariate nonlinear equations, permitting near the root. The main advantage of our methods is that they perform better and moreover, have the same efficiency indices as that of existing multipoint iterative methods. Furthermore, the convergence analysis of the new methods is discussed and several examples are given to illustrate their efficiency.
文摘A split-step second-order predictor-corrector method for space-fractional reaction-diffusion equations with nonhomogeneous boundary conditions is presented and analyzed for the stability and convergence.The matrix transfer technique is used for spatial discretization of the problem.The method is shown to be unconditionally stable and second-order convergent.Numerical experiments are performed to confirm the stability and secondorder convergence of the method.The split-step predictor-corrector method is also compared with an IMEX predictor-corrector method which is found to incur oscillatory behavior for some time steps.Our method is seen to produce reliable and oscillatioresults for any time step when implemented on numerical examples with nonsmooth initial data.We also present a priori reliability constraint for the IMEX predictor-corrector method to avoid unwanted oscillations and show its validity numerically.
文摘EDF R＆D is developing a new calculation scheme based on the transport-Simplified Pn （SPn） approach. The lattice code used is the deterministic code APOLLO2, developed at CEA. The core code is the code COCAGNE, developed at EDF R＆D. The latter can take advantage of a microscopic depletion solver expected to improve the treatment of spectral history effects. However, the direct use of the microscopic depletion solver is computationally very intensive because very small evolution steps （typically 100 MWd/t） are needed to reach a good accuracy, which is not always compatible with industrial applications. In order to reduce the calculation time associated with the use of the microscopic depletion solver, a predictor-corrector scheme has been implemented within COCAGNE. It enables the use of larger evolution steps, up to 1000 MWd/t. Tests show that the predictor-corrector procedure gives fairly accurate results while significantly reducing the calculation time.
文摘This research delves into an intricate exploration offluid dynamics within heat transfer systems,with a specific focus on enhancing our understanding and improving system efficiency.Employing a sophisticated mathematical model,the study incorporates micropolarfluid dynamics,micro rotational effects,laminarflow characterized by the Darcy-Forchheimer model,inertia effects,and chemical reactions within a heat transfer system featuring boundary layer complexities.The mathematical framework consists of partial differential equations(PDEs),and the study utilizes advanced numerical techniques,including the(PC4-FDM)Predictor-Corrector Finite Difference Method and the shooting method,to solve these govern-ing equations.The inclusion of quantized mesh points and analysis of convergence using 4th orderfinite difference methods enhances the precision of the obtained solutions.Various param-eters are scrutinized to draw meaningful insights.The heterogeneous parameter reveals an increasing trend influid concentration,while the homogeneous parameter indicates a collision effect leading to a decrease influid concentration.The Eckert number,associated with viscous dissipation,exhibits a correlation with decreasedfluid temperature and increasedfluid velocity.Micro rotation parameters suggest a parallel increase influid velocity and a marginal decrease influid temperature.Notably,the Darcy-Forchheimer parameter,reflective of inertial effects,showcases an increase influid temperature and decrease in velocity in the convection system.Highlighting the industrial implications,the study underscores the significance of convection heat transfer systems in the context of industrialization.Thefindings offer valuable insights for optimizing heating and cooling processes in diverse industrial applications,ranging from power plants to waste heat recovery units and pharmaceutical industries.
