China experienced a decline of water use intensity in the 11th Five Year Plan,but the water use intensity actually increased in 2009.To the best of our knowledge,the index decomposition analysis method was rarely used...China experienced a decline of water use intensity in the 11th Five Year Plan,but the water use intensity actually increased in 2009.To the best of our knowledge,the index decomposition analysis method was rarely used to analyze changes in water use,and no decomposition analysis has investigated the role of regional economy in the decline of water use intensity.In this paper,we use logarithmic mean Divisia index(LMDI)techniques to decompose the change of water use intensity in the period 2006-2010.We find that the change of industrial water use intensity is confirmed as the dominant contributor to the decline in the overall water use intensity;the regional structure effect and the industrial structure effect is positive to the decline of overall water use intensity;the decline of China's water use intensity is mainly attributed to the effect of developed eastern provinces;meanwhile,the effect of central and undeveloped western is also positive to the decline of overall water use intensity;at least one out of three effects is positive to the decline of water use intensity in the different provinces;the intensity effect is positive and the industrial structure effect is positive to the declines of China's water use intensity based on chaining approach except the period 2008-2009,individually;and the deviation of regional structure effect and industrial structure effect between with regional economy and without regional economy in LMDI is 0.9 and2.3 m^3/10~4 RMB,respectively.展开更多
This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is ...This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is based on the orthogonality principle in linear mean square estimation of stochastic processes. The error of the method is analyzed and compared with that of the conventional method. It is found that the method is able to effectively reduce the error so long as some feasible measures are adopted. A simulated test of the method has been conducted in a large scale wind wave flume. The test results are in good agreement with those given by theoretical error analysis. A scheme to implement the method is proposed on the basis of error analysis. The scheme is so designed as to reduce the estimation error as far as possible. This method is also suitable to utilizing satellite wave data for the estimation.展开更多
The Carboniferous volcanic reservoir in the Chepaizi Uplift became an exploration hot target in recent years for its substantial amount of oils discovered. However, most of the Carboniferous heavy oils were biodegrade...The Carboniferous volcanic reservoir in the Chepaizi Uplift became an exploration hot target in recent years for its substantial amount of oils discovered. However, most of the Carboniferous heavy oils were biodegraded to PM7 or higher with orders of magnitude variation in oil viscosities. Two oil groups (I and II) exactly corresponding to the western and eastern Chepaizi Uplift were distinguished according to their source diagnose. Furthermore, three oil families (II1, II2 and II3), with the biodegradation level of PM7, PM8–8+, PM9+, respectively, were classified based on molecular compositions and parameter-stripping method of strongly bioresistant parameters. Allowing for this extremely high biodegradation case, more biodegradation refractory compound class were added to establish a refined Manco scale to quantitatively evaluate the biodegradation extent. Refined Manco number (RMN2) positively correlated with the oil density, NSO contents, and absolute concentrations of diasteranes and gammacerane, negatively correlated with the absolute concentrations of diahopane, summed tricyclic terpanes and pentacyclic terpanes. This refined scale showed higher resolution than the PM one to differentiate the biodegradation extent of Carboniferous heavy oils from the Chepaizi Uplift, especially those with same PM values but different oil viscosities.展开更多
Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting app...Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.展开更多
To extract quantitative biophysical parameters such as leaf biomass and leaf chlorophyll concentration from the remotely sensed imagery, the effect of atmospheric attenuation must be removed. The refined empirical li...To extract quantitative biophysical parameters such as leaf biomass and leaf chlorophyll concentration from the remotely sensed imagery, the effect of atmospheric attenuation must be removed. The refined empirical line （REL） method was used to calibrate the IKONOS multispectral imagery. The IKONOS digital numbers （DN） were converted to the at-satellite reflectance, then the linear relation between at-satellite reflectance and surface spectral reflectance （ρA） was derived from six bright targets of known reflectance in the image, and modelled estimates of the image reflectance at ρA=0. Validation targets were used to test the feasibility of REL method. The mean relative errors between ρA retrieved from IKONOS image using REL method and ground-measured ρA were 11%, 13%, 3% and 5% in the IKONOS blue, green, red and near-infrared （NIR） respectively. When dark targets are unavailable or measurement of dark target is inconvenient, the REL method was most crucial for retrieving surface spectral reflectance. The REL offers a simple approach for quantitative retrieval of biophysical parameters from IKONOS imagery.展开更多
A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on ...A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on non-uniform rational B-spline (NURBS) technology provides the means to build a refined three-dimensional finite element model with more accurate meshing under complex terrain and geological conditions. Meanwhile, this method is a back-analysis of ground stress with combination of multivariable linear regression model and neural network (ANN) model. Firstly, the regression model is used to fit approximately boundary loads. Regarding the regressed loads as mean value, some sets of boundary loads with the same interval are constructed according to the principle of orthogonal design, to calculate the corresponding ground stress at the observation positions using finite element method. The results (boundary loads and the corresponding ground stress) are added to the samples for ANN training. And on this basis, an ANN model is established to implement higher precise back-analysis of initial ground stress. A practical application case shows that the relative error between the inversed ground stress and observed value is mostly less than 10 %, which can meet the need of engineering design and construction requirements.展开更多
To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direc...To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.展开更多
Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction...Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction angle,which indicates uniform refining effects.The bar angle of the curved bar was proposed and two typical curved-bar plates,the three-stage radial curved-bar plate and isometric curved-bar plate,were designed in this paper.The arc equations of the curved-bar center line and curved-bar edges were established and finally,the specific edge load(SEL)of the curved-bar plate was derived.The determination of bar parameters was discussed,which provides a theoretical basis for the design of curved-bar plates.展开更多
Due to the conflict between equilibrium and constitutive requirements,Eringen’s strain-driven nonlocal integral model is not applicable to nanostructures of engineering interest.As an alternative,the stress-driven mo...Due to the conflict between equilibrium and constitutive requirements,Eringen’s strain-driven nonlocal integral model is not applicable to nanostructures of engineering interest.As an alternative,the stress-driven model has been recently developed.In this paper,for higher-order shear deformation beams,the ill-posed issue(i.e.,excessive mandatory boundary conditions(BCs)cannot be met simultaneously)exists not only in strain-driven nonlocal models but also in stress-driven ones.The well-posedness of both the strain-and stress-driven two-phase nonlocal(TPN-Strain D and TPN-Stress D)models is pertinently evidenced by formulating the static bending of curved beams made of functionally graded(FG)materials.The two-phase nonlocal integral constitutive relation is equivalent to a differential law equipped with two restriction conditions.By using the generalized differential quadrature method(GDQM),the coupling governing equations are solved numerically.The results show that the two-phase models can predict consistent scale-effects under different supported and loading conditions.展开更多
In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate ...In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate or correct when considering specifications that have temporal relationships of operations. The concept of temporal state variables is introduced into Z. Then new implementation relations are defined and new refinement relations are deduced, mainly for temporal state variables to process temporal relationships of operations. We use state transition systems to abstract the temporal state transitions. A simple example is used to show the procedures of MVORM. Finally some directions of further work are forwarded.展开更多
In this paper, based on complex variables and conformal mapping methods, using the refined dynamic equation of plates, elastic wave scattering and dynamic stress concentrations in plates with two cutouts were studied....In this paper, based on complex variables and conformal mapping methods, using the refined dynamic equation of plates, elastic wave scattering and dynamic stress concentrations in plates with two cutouts were studied. Applying the orthogonal function expansion method, the problem to be solved can be reduced into the solution of a set of infinite algebraic equations. According to free boundary conditions, numerical results of dynamic moment concentration factors in thick plates with two circular cutouts analyze that: there will be more complex interaction changes between two-cutout situation than single cutout situation. In the case of low frequency or high frequency and thin plate, the hole-spacing in the absence of coupling interactions was larger or smaller. The numerical results and method can be used to analyze the dynamics and strength of plate-like structures.展开更多
V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were ...V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were investigated. The results show that appropriate technological parameters are： the mass ratio of V205 to TiO2 is 0.5：1, Al addition represents 95% of the theoretical value, and the Al-Mg alloy addition amount is one third that of the Al addition. The results from energy spectrum analysis show that V and Fe distribute uniformly in the prepared alloy, while the segregation for Ti, i.e. Ti-rich phase is detected. A spray refming process was carried out to reduce the impurity contents of Al and O in the prepared alloys. The Al content drops from 4.27% to 1.86%, and the O content drops from 2.10% to 0.91% after the refining process.展开更多
基金subsidized by the Central Project of Water Resource Fees[grant number 1261320212020]
文摘China experienced a decline of water use intensity in the 11th Five Year Plan,but the water use intensity actually increased in 2009.To the best of our knowledge,the index decomposition analysis method was rarely used to analyze changes in water use,and no decomposition analysis has investigated the role of regional economy in the decline of water use intensity.In this paper,we use logarithmic mean Divisia index(LMDI)techniques to decompose the change of water use intensity in the period 2006-2010.We find that the change of industrial water use intensity is confirmed as the dominant contributor to the decline in the overall water use intensity;the regional structure effect and the industrial structure effect is positive to the decline of overall water use intensity;the decline of China's water use intensity is mainly attributed to the effect of developed eastern provinces;meanwhile,the effect of central and undeveloped western is also positive to the decline of overall water use intensity;at least one out of three effects is positive to the decline of water use intensity in the different provinces;the intensity effect is positive and the industrial structure effect is positive to the declines of China's water use intensity based on chaining approach except the period 2008-2009,individually;and the deviation of regional structure effect and industrial structure effect between with regional economy and without regional economy in LMDI is 0.9 and2.3 m^3/10~4 RMB,respectively.
文摘This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is based on the orthogonality principle in linear mean square estimation of stochastic processes. The error of the method is analyzed and compared with that of the conventional method. It is found that the method is able to effectively reduce the error so long as some feasible measures are adopted. A simulated test of the method has been conducted in a large scale wind wave flume. The test results are in good agreement with those given by theoretical error analysis. A scheme to implement the method is proposed on the basis of error analysis. The scheme is so designed as to reduce the estimation error as far as possible. This method is also suitable to utilizing satellite wave data for the estimation.
基金This work was funded by the National Natural Science Foundation of China(Grant No.42072172,41772120)the Shandong Province Natural Science Fund for Distinguished Young Scholars(Grant No.JQ201311)+1 种基金the SDUST Research Fund(Grant No.2015TDJH101)Associated editor Jie Hao and seven anonymous reviewers were deeply acknowledged for their critical comments and helpful suggestions,which greatly improved the early version of this manuscript.
文摘The Carboniferous volcanic reservoir in the Chepaizi Uplift became an exploration hot target in recent years for its substantial amount of oils discovered. However, most of the Carboniferous heavy oils were biodegraded to PM7 or higher with orders of magnitude variation in oil viscosities. Two oil groups (I and II) exactly corresponding to the western and eastern Chepaizi Uplift were distinguished according to their source diagnose. Furthermore, three oil families (II1, II2 and II3), with the biodegradation level of PM7, PM8–8+, PM9+, respectively, were classified based on molecular compositions and parameter-stripping method of strongly bioresistant parameters. Allowing for this extremely high biodegradation case, more biodegradation refractory compound class were added to establish a refined Manco scale to quantitatively evaluate the biodegradation extent. Refined Manco number (RMN2) positively correlated with the oil density, NSO contents, and absolute concentrations of diasteranes and gammacerane, negatively correlated with the absolute concentrations of diahopane, summed tricyclic terpanes and pentacyclic terpanes. This refined scale showed higher resolution than the PM one to differentiate the biodegradation extent of Carboniferous heavy oils from the Chepaizi Uplift, especially those with same PM values but different oil viscosities.
基金Project supported by the National Natural Science Foundation of China(Nos.11932008 and 12272156)the Fundamental Research Funds for the Central Universities(No.lzujbky-2022-kb06)+1 种基金the Gansu Science and Technology ProgramLanzhou City’s Scientific Research Funding Subsidy to Lanzhou University of China。
文摘Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.
基金Project supported by the Hi-Tech Research and Development Pro-gram (863) of China (Nos. 2002AA130010-2-7 and 2003AA131020- 04-06) and the National Natural Science Foundation of China (No. 40171065)
文摘To extract quantitative biophysical parameters such as leaf biomass and leaf chlorophyll concentration from the remotely sensed imagery, the effect of atmospheric attenuation must be removed. The refined empirical line （REL） method was used to calibrate the IKONOS multispectral imagery. The IKONOS digital numbers （DN） were converted to the at-satellite reflectance, then the linear relation between at-satellite reflectance and surface spectral reflectance （ρA） was derived from six bright targets of known reflectance in the image, and modelled estimates of the image reflectance at ρA=0. Validation targets were used to test the feasibility of REL method. The mean relative errors between ρA retrieved from IKONOS image using REL method and ground-measured ρA were 11%, 13%, 3% and 5% in the IKONOS blue, green, red and near-infrared （NIR） respectively. When dark targets are unavailable or measurement of dark target is inconvenient, the REL method was most crucial for retrieving surface spectral reflectance. The REL offers a simple approach for quantitative retrieval of biophysical parameters from IKONOS imagery.
基金Innovative Research Groups of the National Natural Science Foundation of China (No.51021004)National Science Foundation of China (No. 51079096)Program for New Century Excellent Talents in University (No. NCET-08-0391)
文摘A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on non-uniform rational B-spline (NURBS) technology provides the means to build a refined three-dimensional finite element model with more accurate meshing under complex terrain and geological conditions. Meanwhile, this method is a back-analysis of ground stress with combination of multivariable linear regression model and neural network (ANN) model. Firstly, the regression model is used to fit approximately boundary loads. Regarding the regressed loads as mean value, some sets of boundary loads with the same interval are constructed according to the principle of orthogonal design, to calculate the corresponding ground stress at the observation positions using finite element method. The results (boundary loads and the corresponding ground stress) are added to the samples for ANN training. And on this basis, an ANN model is established to implement higher precise back-analysis of initial ground stress. A practical application case shows that the relative error between the inversed ground stress and observed value is mostly less than 10 %, which can meet the need of engineering design and construction requirements.
基金financially supported by the National Natural Science Foundation of China(No.41574127 and 41174104)the National Key Technology R&D Program for the 13th five-year plan(No.2016ZX05018006-006)
文摘To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.
基金funding by the National Natural Science Foundation (Grant No. 50745048)
文摘Straight-and curved-bar refining plates are two important types of plates commonly used in disc refiners in the papermaking industry.Theoretically,the curved-bar refining plate has a relatively uniform bar interaction angle,which indicates uniform refining effects.The bar angle of the curved bar was proposed and two typical curved-bar plates,the three-stage radial curved-bar plate and isometric curved-bar plate,were designed in this paper.The arc equations of the curved-bar center line and curved-bar edges were established and finally,the specific edge load(SEL)of the curved-bar plate was derived.The determination of bar parameters was discussed,which provides a theoretical basis for the design of curved-bar plates.
基金Project supported by the National Natural Science Foundation of China(No.11672131)。
文摘Due to the conflict between equilibrium and constitutive requirements,Eringen’s strain-driven nonlocal integral model is not applicable to nanostructures of engineering interest.As an alternative,the stress-driven model has been recently developed.In this paper,for higher-order shear deformation beams,the ill-posed issue(i.e.,excessive mandatory boundary conditions(BCs)cannot be met simultaneously)exists not only in strain-driven nonlocal models but also in stress-driven ones.The well-posedness of both the strain-and stress-driven two-phase nonlocal(TPN-Strain D and TPN-Stress D)models is pertinently evidenced by formulating the static bending of curved beams made of functionally graded(FG)materials.The two-phase nonlocal integral constitutive relation is equivalent to a differential law equipped with two restriction conditions.By using the generalized differential quadrature method(GDQM),the coupling governing equations are solved numerically.The results show that the two-phase models can predict consistent scale-effects under different supported and loading conditions.
基金Supported by Natural Science Foundation of Hubei Province (98J0 75 ) Ziqiang Technical Innovation Foundation ofWuhan Universi
文摘In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate or correct when considering specifications that have temporal relationships of operations. The concept of temporal state variables is introduced into Z. Then new implementation relations are defined and new refinement relations are deduced, mainly for temporal state variables to process temporal relationships of operations. We use state transition systems to abstract the temporal state transitions. A simple example is used to show the procedures of MVORM. Finally some directions of further work are forwarded.
文摘In this paper, based on complex variables and conformal mapping methods, using the refined dynamic equation of plates, elastic wave scattering and dynamic stress concentrations in plates with two cutouts were studied. Applying the orthogonal function expansion method, the problem to be solved can be reduced into the solution of a set of infinite algebraic equations. According to free boundary conditions, numerical results of dynamic moment concentration factors in thick plates with two circular cutouts analyze that: there will be more complex interaction changes between two-cutout situation than single cutout situation. In the case of low frequency or high frequency and thin plate, the hole-spacing in the absence of coupling interactions was larger or smaller. The numerical results and method can be used to analyze the dynamics and strength of plate-like structures.
基金Project (2006AA068128) supported by the High-tech Research and Development Program of China
文摘V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were investigated. The results show that appropriate technological parameters are： the mass ratio of V205 to TiO2 is 0.5：1, Al addition represents 95% of the theoretical value, and the Al-Mg alloy addition amount is one third that of the Al addition. The results from energy spectrum analysis show that V and Fe distribute uniformly in the prepared alloy, while the segregation for Ti, i.e. Ti-rich phase is detected. A spray refming process was carried out to reduce the impurity contents of Al and O in the prepared alloys. The Al content drops from 4.27% to 1.86%, and the O content drops from 2.10% to 0.91% after the refining process.
