Chalkiness characters affect not only the grain appearance,milling,eating and cooking qualities but also the grain nutritional quality in rice,thus it is one of the most important traits in rice. It is very important ...Chalkiness characters affect not only the grain appearance,milling,eating and cooking qualities but also the grain nutritional quality in rice,thus it is one of the most important traits in rice. It is very important for us to investigate the relation of the chalkiness formation and the development of endosperm structure and starch granule of different rice varieties. Here,we have investigated the chalkiness characters such as chalkiness rate,chalkiness degree and chalkiness area in 15 japonica rice varieties from southern Henan. Furthermore,the endosperm structure and starch granules of rice grain were also observed with scanning electron microscope. The results showed that the 15 japonica varieties have a significantly linear relationship between the chalkiness rate and chalkiness degree. Among the varieties,the biggest difference is the chalkiness rate,the second is the chalkiness area,and the last is the chalkiness degree. Moreover,there is a certain correlation between the distribution of starch granules,the arrangement of endosperm cells and the occurrence of grain chalkiness in the different rice varieties. For the same variety,the starch granules of chalky and non-chalky grains have obvious difference,while the starch granules from the transparent part of chalky rice and non-chalky rice do not have significant difference. The results would provide useful references for the improvement of grain quality in rice.展开更多
Background:Fingermark is an individual’s primary identification source.It is helpful in determining individuals involved in illegal activities and is frequently encountered in clandestine laboratories.During forensic...Background:Fingermark is an individual’s primary identification source.It is helpful in determining individuals involved in illegal activities and is frequently encountered in clandestine laboratories.During forensic investigation,the critical question to be answered is whether a fingermark was left on a surface before or after the initiation of an unlawful activity.Aims and Objectives:This study aimed to investigate the visualization of methamphetamine-contaminated fingermarks on glass surfaces and estimate the immediacy of their depositions.Materials and Methods:In this study,the prior-deposition contaminated fingermarks,i.e.,fingermarks deposited a surface priorly contaminated by methamphetamine,and the postdeposition contaminated fingermarks,i.e.,fingermarks deposited on a clean surface but subsequently contaminated with methamphetamine were visualized and compared using Field Emission Scanning Electron Microscope(FESEM).Results:Under FESEM,the latent fingermarks and the crystalline structure of methamphetamine were clearly visualized.The postdeposition contaminated fingermarks appeared in smudge conditions in all the three replicate samples,where the ridge and nonridge areas could not be well-distinguished.On the contrary,the prior-deposition contaminated fingermark demonstrated distinct separations between ridges and nonridges.However,the application of fingerprint powders reduced the possibility to determine the immediacy of deposition.Conclusion:To conclude,both prior-deposition contaminated fingermarks and postdeposition contaminated fingermarks can be discriminated,providing information on the instance when a fingermark was left on a surface.展开更多
A scanning electron microscope(SEM)provides real-time imaging with nanometer resolution and a large scanning area,which enables the development and integration of robotic nanomanipulation systems inside a vacuum chamb...A scanning electron microscope(SEM)provides real-time imaging with nanometer resolution and a large scanning area,which enables the development and integration of robotic nanomanipulation systems inside a vacuum chamber to realize simultaneous imaging and direct interactions with nanoscaled samples.Emerging techniques for nanorobotic manipulation during SEM imaging enable the characterization of nanomaterials and nanostructures and the prototyping/assembly of nanodevices.This paper presents a comprehensive survey of recent advances in nanorobotic manipulation,including the development of nanomanipulation platforms,tools,changeable toolboxes,sensing units,control strategies,electron beam-induced deposition approaches,automation techniques,and nanomanipulation-enabled applications and discoveries.The limitations of the existing technologies and prospects for new technologies are also discussed.展开更多
Objective To ascertain the coexistence of osteoarthritis and osteoporosis in the femoral head. Methods During total hip replacement for osteoarthritis of hip joint in 12 female patients with an average age of 56 years...Objective To ascertain the coexistence of osteoarthritis and osteoporosis in the femoral head. Methods During total hip replacement for osteoarthritis of hip joint in 12 female patients with an average age of 56 years, the femoral heads were procured. After processing the femoral had, specimens were studied under scanning electron microscope. Results Different degrees of osteoarthritic lesions (characterized by degeneration of articular cartilage and hyperplasia of subchondral bone tissues) could coexust with osteoporotic lesions (characterized by icicle-like trabeculae ) in the femoral had. The hyperplas- tic bone tissues of osteoarthritis lay in the vicinity of icicle-like trabeculae. However, they did not care into contact, nor did they exert influence on each other. Coexistence of these two different lesions covered a brood territory extending from the deep surface of subchondral bone plate to the head-neck junction of femoral head. Conclusion The results suggest that osteoarthritis and osteoporosis do coexist in the femoral head.展开更多
The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,...The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,and the secondary electron emission(SEE)characteristics for the VGN structure are studied.The COMSOL simulation and the scanning electron microscope(SEM)image analysis are carried out to study the secondary electron yield(SEY).The effect of aspect ratio and packing density of VGN on SEY under normal incident condition are studied.The results show that the VGN structure has a good effect on suppressing SEE.展开更多
We detailed the valve morphology of five new species of diatom genus Nupela from wetwall communities in Yunnan Province,China,with light and scanning electron microscope.The five new species demonstrate great variabil...We detailed the valve morphology of five new species of diatom genus Nupela from wetwall communities in Yunnan Province,China,with light and scanning electron microscope.The five new species demonstrate great variability within the genus,as three of them are biraphid and two are monoraphid.In addition,variation was noted in the structure of internal proximal raphe ends,with some species having anchor-shaped ends and other species have hooked ends.The genus Nupela has grown considerably in 30years since it was first proposed,going from a monotypic genus to over 85 taxa.Diagnosis of the genus is based on the presence of an external covering over the areolae.We discussed the systematic placement of Nupela within the naviculoid diatoms.Yunnan Province appears to harbor many endemic diatom taxa,and many regions of the province have yet to be studied.展开更多
To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by...To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by immersing the material in distilled water for 36 days at ambient temperature and fitted to Fick’s second law.The strength of materials before and after water absorption were tested by uniaxial experiments,and the effects of the filling ratio and water absorption on the mechanical properties of the materials were analyzed and explained.Finally,the failure modes and mechanism of the hollow glass microspheres composite material were explicated from the microscopic level by scanning electron microscope(SEM).This research will help solve the problems of solid buoyancy materials in ocean engineering applications.展开更多
The treatment of wheat straw is very difficult,and its utilization rate is very low;accumulation causes air pollution and even fire.To make full use of wheat straw resources,we examined how using different physical an...The treatment of wheat straw is very difficult,and its utilization rate is very low;accumulation causes air pollution and even fire.To make full use of wheat straw resources,we examined how using different physical and chemical methods to treat the wheat straw which can improve its strength abilities,or enhance the activity of wheat straw ash.In terms of concrete additives,it can reduce the amount of cement used.In this paper,we found that alkali treatment can significantly improve the tensile strength of wheat straw fiber,but polyvinyl alcohol treatment has no obvious effect on the strength of wheat straw fiber after alkali treatment.At the same time,we analyzed the wheat straw fiber microstructure through scanning electron microscopy,and we also studied the wheat straw ash chemical composition after 600℃ high-temperature treatment.Through the compressive strength test,we found that the strength of concrete decreases with increasing of wheat straw fiber and wheat straw powder content,and the compressive strength of concrete with wheat straw ash instead of 5%cement decreases little,and the strength of the concrete also decreases with the increasing of wheat straw ash.Through the macroscopic observation of the failure form of concrete,we found that the failure form of concrete with wheat straw ash is similar to that of common concrete,while the failure degree of concrete with wheat straw fiber and wheat straw powder is weakened.Through the scanning electron microscope test of the concrete,it was found that wheat straw fiber has an effect on the cracking of concrete and the inner compactness of concrete can also be affected by adding wheat straw ash and wheat straw powder.展开更多
Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w...Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.展开更多
Objective:To investigate the prevalence,phylogenetics and DNA barcoding of Zeylanicobdella arugamensis(Z.arugamensis) from crimson snapper(Lutjanus erythropterus),Jerejak Island,Penang,Malaysia.Methods:Experiment was ...Objective:To investigate the prevalence,phylogenetics and DNA barcoding of Zeylanicobdella arugamensis(Z.arugamensis) from crimson snapper(Lutjanus erythropterus),Jerejak Island,Penang,Malaysia.Methods:Experiment was conducted with 200 fish specimens of cultured Lutjanus erythropterus from Jerejak Island,Penang,Peninsular Malaysia.The water temperature and length for each fish were measured prior to parasites examination.Next,the morphological identification of parasites was performed.Genomic DNA from parasites was extracted for further molecular analysis.After PCR amplification,phylogenetic tree was constructed.The lowest Bayesian information criterion scores showed that the most compatible model is Tajima and Nei.Finally,data sets of cytochrome oxidase subunit I gene sequence and trace file have been submitted to Barcode of Life Data System.Results:The prevalence rate of Z.arugamensis was recorded to be 11.5%,and the intensity was 1.48.The low intensity was due to the water temperature recorded in this study(32.9–33.2 C).All the individuals of Z.arugamensis recorded in this study showed a close relationship with species that were recorded in NCBI database(Z.arugamensis DQ414344,Aestabdella leiostomi DQ414305,Pterobdella amara DQ414334 and Cystobranchus meyeri DQ414315) but less relationship with Aestabdella abditovesiculata DQ414300.Finally,the DNA sequences submitted to Barcode of Life Data System in accordance to species have already obtained Barcode Index Number as BOLD:ACM3477.Conclusions:This study has provided an overview of sequence divergence at cytochrome oxidase subunit I gene,DNA barcodes and parasite prevalence of Z.arugamensis.展开更多
Ga-doped Yttrium Iron Garnet (Y_(3)Ga_(x)Fe_(5-x)O_(12),Ga:YIG) was prepared by solid state reaction method and sintering at 1 300 ℃.Rietveld analysis of X-ray diffraction patterns indicated that all samples crystall...Ga-doped Yttrium Iron Garnet (Y_(3)Ga_(x)Fe_(5-x)O_(12),Ga:YIG) was prepared by solid state reaction method and sintering at 1 300 ℃.Rietveld analysis of X-ray diffraction patterns indicated that all samples crystallized in a single cubic structure (space group Ia-3d) with decreasing lattice constant as Ga concentration increased.SEM surface micrograph images of YIG samples showed highly compacted grains with small reduction in the grain size with increasing Ga concentration.Raman spectroscopy measurements confirmed the replacement of Fe^(3+) ions by Ga^(3+) ions in the garnet structure was revealed by the observed blue shifts in Raman spectra.The saturation magnetization decreased from 28.2 to 4.98 emu g^(-1) with increasing x from 0.0 to 1.0 due to the preferential substitution of Ga^(3+) ions for Fe^(3+) ions at tetrahedral sites.Room temperature Mössbauer spectra for the samples revealed a reduction of the hyperfine field values for octahedral and tetrahedral sites,and the development of additional components with increasing Ga concentration.Analysis of the magnetic data and Mössbauer spectra confirmed that spin canting in the substituted garnets plays an important role in explaining the observed reduction of the saturation magnetization as x increased.展开更多
In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosi...In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40 Cr Mn Si B steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thickness and the number of the circumferential divisions. The results show that as the tempering temperature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.展开更多
Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic...Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic electro-hydraulic servo press to study the evolution laws of physical and fracture properties of different deep rock materials under high-temperature geological conditions. The fracture characteristics were measured using an industrial camera and digital image correlation technology to analyze the effect of high temperature on fracture properties and failure modes of the CSTBD samples after different thermal treatments. The micro-damage properties of green sandstone and granite materials were obtained using a scanning electron microscope(SEM). The following conclusions were drawn from the test results:(1) With the increasing temperature, the fracture characteristics of green sandstone and granite change from brittle fracture to plasticity fracture, the longitudinal wave velocity of granite decreases sharply at 600℃, and the damage factor reaches 0.8748 at 700℃.(2) The fracture toughness of green sandstone and granite decreases with increasing temperature;however, the decreasing range of granite is larger than that of green sandstone.(3) As the temperature increases, the fracture morphologies of green sandstone and granite materials become rougher, whereas thermal damage cracks of granite and intergranular fractures inside sandstone as well as pores of sandstone increase.(4) The crack tip opening displacement and peak strain corresponding to peak load increase with the temperature.展开更多
A silver nanostructures prepared by using chemical reduction method. The silver nanoparticles were prepared with diameters of about (20 nm). Numerous techniques had been used to study the optical, structural like the ...A silver nanostructures prepared by using chemical reduction method. The silver nanoparticles were prepared with diameters of about (20 nm). Numerous techniques had been used to study the optical, structural like the UV-Vis absorption spectrometer, Ttransmission Electron Microscopy (TEM), Field-Emission Scanning Electron microscope (FESEM), and X-ray diffraction (XRD). The practical results exhibited the absorption spectrum of the prepared nanoparticles at (357 nm), it was found that there is a relationship between the positions of the optical absorption peak and the size of the silver nanoparticles. The analysis of TEM results showed the presence of nanoparticles in the range (20 nm). The analyzing of XRD results explained the crystal structure for silver nanoparticles. It is found a cubic unit cell have a lattice constants (a = 4.0855 <span style="white-space:nowrap;">Å</span>), with the Miller indices were (111), (002), (002), and (113).展开更多
In order to investigate the influence of natural defect on the fatigue behavior of 5A06/7A05 dissimilar aluminum alloys welding joint,fatigue tests of two types of specimens with and without defects were carried out s...In order to investigate the influence of natural defect on the fatigue behavior of 5A06/7A05 dissimilar aluminum alloys welding joint,fatigue tests of two types of specimens with and without defects were carried out systematically under stress amplitude control conditions (stress ratio R=0.1) at normal temperature in laboratory air condition.Furthermore,a new parameter,i e,fatigue defect effect factor (FDEF) was introduced to assess the effect of defect on fatigue strength.The fatigue failure analysis was conducted as well to compare the fatigue and fracture behavior of the two types of specimens.The results show that:(1) natural defects have a strong effect on the fatigue lives of welding joint,and the differences between the specimens with and without defects can reach 80 times under a same theoretical net sectional stress;(2) the FDEF parameter introduced is effective to deal with the defect effect,and the FDEF decreases along with the increase of fatigue life.The mean relative error between the experimental data and predicted fatigue strength based on the FDEF is 10.2%;(3) the macro fracture of both types of specimens have three typical zones,i e,fatigue source zone,crack propagation zone and final fracture zone,while there are more than one fatigue sources for specimens with natural defects.The overall pattern of crack propagation zone and fracture zone are quite similar,but the morphologies are different in details.展开更多
Polyhydroxyalkanoates(PHAs)were synthesized in activated sludge using three types of carbon sources(sodium acetate,sodium propionate and sodium butyrate),and their characterization were studied.It was shown that the c...Polyhydroxyalkanoates(PHAs)were synthesized in activated sludge using three types of carbon sources(sodium acetate,sodium propionate and sodium butyrate),and their characterization were studied.It was shown that the content of PHA synthesized by microorganisms in activated sludge were different.The biggest synthetic amount up to 36.7% of VSS was obtained when sodium acetate was used as carbon source.The polymer yield was lower when using sodium propionate as the carbon source than when using others,with25.1% of VSS,while resulted in an increase of hydroxyvalerate(HV)units produced.The structure and thermal properties of extracted biopolymers were analyzed by scanning electron microscope(SEM),Fourier transform infrared spectroscopy(FTIR)and themogravimetry(TG).展开更多
In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy fr...In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy from ambient vibrations have been revolutionized.There’s an absence of experiment-based investigation which incorporates the microstructure analysis and crystal morphology of those energy harvest home materials.Moreover,the impact of variable mechanical and thermal load conditions has seldom been studied within the previous literature to utilize the effectiveness of those materials in several practical applications like structural health monitoring(SHM),etc.In the proposed research work,scanning electron microscope(SEM)and energy dispersive x-ray(EDX)analysis are performed to examine the inside crystal morphology of PZT-5A and ensure the quality of the piezoelectric ceramic.Further,the performance of piezoelectric vibration-based energy harvester has been investigated in the second phase of current research work under the variable mechanical and thermal load conditions through a regular series of experiments.It’s been found that the output voltage of piezoelectric sensors will increase by increasing the applied load,whereas a decreasing trend in output voltage is noticed by increasing the applied temperature,resistance and frequency.Within the third part,a measuring setup is developed in the laboratory to further investigate the effectiveness of PZT-5A in practical applications such as electromechanical impedance(EMI)based structural health monitoring under the controlled heating environment.Therefore,this analysis not only evaluates the performance of PZT sensors under the variable operating conditions but also encourages developing a temperature compensation approach in EMI-based SHM.展开更多
[Objectives] The paper was to explore whether the microemulsion is a nano-pesticide. [Methods] Several microemulsions commonly available on the market were studied from the perspective of particle size and morphologic...[Objectives] The paper was to explore whether the microemulsion is a nano-pesticide. [Methods] Several microemulsions commonly available on the market were studied from the perspective of particle size and morphological characteristics. With ZIF nano-pesticide prepared earlier as the control, the changes in particle size of microemulsions diluted at different concentrations and the microscopic morphology of dispersed particles were tested and compared by dynamic light scattering laser particle size analyzer combined with scanning electron microscope. [Results] Conventional microemulsions were in dynamic equilibrium, and the particle size changed irregularly after dilution at different concentrations. Especially under scanning electron microscope, the particle distribution of pesticide-bearing droplets were uneven after drying, with aggregation and precipitation of large particles, while the particle size of nano-pesticide changed little after dilution at different concentrations, ranging from 1 to 300 nm. Moreover, the microscopic morphology of nano-pesticide observed under scanning electron microscope was in monodisperse nano state, without aggregation. [Conclusions] The particle size measured by dynamic light scattering alone can not judge whether the microemulsion is a nanometer pesticide, and it is necessary to observe the microscopic disperse state and particle size distribution with the help of electron microscopy.展开更多
The antioxidant of seeds was carried out using extracts from methanol and Silver Nanoparticles from the spice. The SEM shows the shapes, dispersion and agglomeration of the sample, while the EDX confirms the SEM and t...The antioxidant of seeds was carried out using extracts from methanol and Silver Nanoparticles from the spice. The SEM shows the shapes, dispersion and agglomeration of the sample, while the EDX confirms the SEM and the presence of some compounds. The FT-IR reveals the AgNP<sub>s</sub> capping and reducing the particular biomolecule from the functional group for identification. Compounds found in the FT-IR seeds of Capsicum annum are Ag L (Silver iodide), C K (Cyanogen chloride), P K (Phenol). Monodora myristica are Mo L (Molybdenum), Ag L (Silver iodide), C K (Cyanogen chloride), P K (Phenol), Mg K (Magnesium). Piper guineense are Ag L (Silver iodide), Ci K (Potassium chloride), C K (Cyanogen chloride), P K (Phenol). The seeds show that the AgNP<sub>S</sub> of CA and MM has a better antioxidant activity than the methanol of CA and MM, while the PG methanol has a better activity than the AgNP<sub>S</sub> PG. The control (Catechin and Galic acid) has a slight overall better DPPH activity than the AgNP<sub>S</sub>. It is important to note that there is a concentration dependency in CA, MM AgNP<sub>S,</sub> PG methanol respectively. Notably, at CA methanol, the conc. at 125 was higher than the conc. at 250. Hence, there is need to create a great part in using plant samples for making tabulated or capsulated drugs for treatment of diseases and using plant silver nanoparticles to develop a healthy food/drug preservative package material “smart packaging” that will enhance shelf-life.展开更多
基金Supported by Key Project of Science and Technology in Henan Province(152102110100,152102110036)National Natural Science Foundation of China(U1604110,U1404319,31270727,31600992)+3 种基金Nanhu Scholars Program for Young Scholars of XYNU(2016056)Major Science and Technology Project in Henan Province(121100110200)Students Scientific Research Fund of Xinyang Normal University(2015-DXS-158)Fund of Institute for Conservation and Utilization of Agro-bioresources in Dabie Mountains(2016020)
文摘Chalkiness characters affect not only the grain appearance,milling,eating and cooking qualities but also the grain nutritional quality in rice,thus it is one of the most important traits in rice. It is very important for us to investigate the relation of the chalkiness formation and the development of endosperm structure and starch granule of different rice varieties. Here,we have investigated the chalkiness characters such as chalkiness rate,chalkiness degree and chalkiness area in 15 japonica rice varieties from southern Henan. Furthermore,the endosperm structure and starch granules of rice grain were also observed with scanning electron microscope. The results showed that the 15 japonica varieties have a significantly linear relationship between the chalkiness rate and chalkiness degree. Among the varieties,the biggest difference is the chalkiness rate,the second is the chalkiness area,and the last is the chalkiness degree. Moreover,there is a certain correlation between the distribution of starch granules,the arrangement of endosperm cells and the occurrence of grain chalkiness in the different rice varieties. For the same variety,the starch granules of chalky and non-chalky grains have obvious difference,while the starch granules from the transparent part of chalky rice and non-chalky rice do not have significant difference. The results would provide useful references for the improvement of grain quality in rice.
基金Universiti Sains Malaysia RUI grant(1001/PPSK/8012236).
文摘Background:Fingermark is an individual’s primary identification source.It is helpful in determining individuals involved in illegal activities and is frequently encountered in clandestine laboratories.During forensic investigation,the critical question to be answered is whether a fingermark was left on a surface before or after the initiation of an unlawful activity.Aims and Objectives:This study aimed to investigate the visualization of methamphetamine-contaminated fingermarks on glass surfaces and estimate the immediacy of their depositions.Materials and Methods:In this study,the prior-deposition contaminated fingermarks,i.e.,fingermarks deposited a surface priorly contaminated by methamphetamine,and the postdeposition contaminated fingermarks,i.e.,fingermarks deposited on a clean surface but subsequently contaminated with methamphetamine were visualized and compared using Field Emission Scanning Electron Microscope(FESEM).Results:Under FESEM,the latent fingermarks and the crystalline structure of methamphetamine were clearly visualized.The postdeposition contaminated fingermarks appeared in smudge conditions in all the three replicate samples,where the ridge and nonridge areas could not be well-distinguished.On the contrary,the prior-deposition contaminated fingermark demonstrated distinct separations between ridges and nonridges.However,the application of fingerprint powders reduced the possibility to determine the immediacy of deposition.Conclusion:To conclude,both prior-deposition contaminated fingermarks and postdeposition contaminated fingermarks can be discriminated,providing information on the instance when a fingermark was left on a surface.
基金This study was supported by the Natural Sciences and Engineering Research Council of Canada,the Canada Research Chairs Program,and the Ontario Ministry of Research and Innovation via an ORF-RE grant.
文摘A scanning electron microscope(SEM)provides real-time imaging with nanometer resolution and a large scanning area,which enables the development and integration of robotic nanomanipulation systems inside a vacuum chamber to realize simultaneous imaging and direct interactions with nanoscaled samples.Emerging techniques for nanorobotic manipulation during SEM imaging enable the characterization of nanomaterials and nanostructures and the prototyping/assembly of nanodevices.This paper presents a comprehensive survey of recent advances in nanorobotic manipulation,including the development of nanomanipulation platforms,tools,changeable toolboxes,sensing units,control strategies,electron beam-induced deposition approaches,automation techniques,and nanomanipulation-enabled applications and discoveries.The limitations of the existing technologies and prospects for new technologies are also discussed.
文摘Objective To ascertain the coexistence of osteoarthritis and osteoporosis in the femoral head. Methods During total hip replacement for osteoarthritis of hip joint in 12 female patients with an average age of 56 years, the femoral heads were procured. After processing the femoral had, specimens were studied under scanning electron microscope. Results Different degrees of osteoarthritic lesions (characterized by degeneration of articular cartilage and hyperplasia of subchondral bone tissues) could coexust with osteoporotic lesions (characterized by icicle-like trabeculae ) in the femoral had. The hyperplas- tic bone tissues of osteoarthritis lay in the vicinity of icicle-like trabeculae. However, they did not care into contact, nor did they exert influence on each other. Coexistence of these two different lesions covered a brood territory extending from the deep surface of subchondral bone plate to the head-neck junction of femoral head. Conclusion The results suggest that osteoarthritis and osteoporosis do coexist in the femoral head.
基金supported by the National Natural Science Foundation of China(Grant No.11975163)。
文摘The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,and the secondary electron emission(SEE)characteristics for the VGN structure are studied.The COMSOL simulation and the scanning electron microscope(SEM)image analysis are carried out to study the secondary electron yield(SEY).The effect of aspect ratio and packing density of VGN on SEY under normal incident condition are studied.The results show that the VGN structure has a good effect on suppressing SEE.
基金Supported by the National Nature Science Foundation(No.31970217)the One-Hundred Talents Program of Shanxi Provincethe Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(No.2019L0070)。
文摘We detailed the valve morphology of five new species of diatom genus Nupela from wetwall communities in Yunnan Province,China,with light and scanning electron microscope.The five new species demonstrate great variability within the genus,as three of them are biraphid and two are monoraphid.In addition,variation was noted in the structure of internal proximal raphe ends,with some species having anchor-shaped ends and other species have hooked ends.The genus Nupela has grown considerably in 30years since it was first proposed,going from a monotypic genus to over 85 taxa.Diagnosis of the genus is based on the presence of an external covering over the areolae.We discussed the systematic placement of Nupela within the naviculoid diatoms.Yunnan Province appears to harbor many endemic diatom taxa,and many regions of the province have yet to be studied.
基金financially supported by the Natural Science Foundation of Liaoning Province(Grant No.2021-MS-109)。
文摘To study the water absorption of hollow glass microspheres(HGMs)composite epoxy resin solid buoyancy materials in the marine environment and its effect on the mechanical properties,the water absorption was measured by immersing the material in distilled water for 36 days at ambient temperature and fitted to Fick’s second law.The strength of materials before and after water absorption were tested by uniaxial experiments,and the effects of the filling ratio and water absorption on the mechanical properties of the materials were analyzed and explained.Finally,the failure modes and mechanism of the hollow glass microspheres composite material were explicated from the microscopic level by scanning electron microscope(SEM).This research will help solve the problems of solid buoyancy materials in ocean engineering applications.
基金Supported by the Opening Project of Tunnel and Underground Engineering Research Center of Jiangsu Province (TERC) (2021-SDJJ-08).
文摘The treatment of wheat straw is very difficult,and its utilization rate is very low;accumulation causes air pollution and even fire.To make full use of wheat straw resources,we examined how using different physical and chemical methods to treat the wheat straw which can improve its strength abilities,or enhance the activity of wheat straw ash.In terms of concrete additives,it can reduce the amount of cement used.In this paper,we found that alkali treatment can significantly improve the tensile strength of wheat straw fiber,but polyvinyl alcohol treatment has no obvious effect on the strength of wheat straw fiber after alkali treatment.At the same time,we analyzed the wheat straw fiber microstructure through scanning electron microscopy,and we also studied the wheat straw ash chemical composition after 600℃ high-temperature treatment.Through the compressive strength test,we found that the strength of concrete decreases with increasing of wheat straw fiber and wheat straw powder content,and the compressive strength of concrete with wheat straw ash instead of 5%cement decreases little,and the strength of the concrete also decreases with the increasing of wheat straw ash.Through the macroscopic observation of the failure form of concrete,we found that the failure form of concrete with wheat straw ash is similar to that of common concrete,while the failure degree of concrete with wheat straw fiber and wheat straw powder is weakened.Through the scanning electron microscope test of the concrete,it was found that wheat straw fiber has an effect on the cracking of concrete and the inner compactness of concrete can also be affected by adding wheat straw ash and wheat straw powder.
文摘Non Pt based metals and alloys as electrode materials for methyl alcohol fuel cells have been investigated w ith an aim of finding high electrocatalytic surface property for the faster electrode reactions.Electrodes w ere fabricated by electrodeposition on pure Al foil,from an electrolyte of Ni,Co,Fe salts.The optimum condition of electrodeposition w ere found out by a series of experiments,varying the chemistry of the electrolyte,pH valve,temperature,current and cell potential.Polarization study of the coated Ni-Co or Ni-CoFe alloy on pure Al w as found to exhibit high exchange current density,indicating an improved electro catalytic surface w ith faster charge-discharge reactions at anode and cathode and low overvoltage.Electrochemical impedance studies on coated and uncoated surface clearly show ed that the polarization resistance and impedance w ere decreased by Ni-Co or Ni-Co-Fe coating.X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDX)and atomic absorption spectroscopy(AAS)studies confirmed the presence of alloying elements and constituents of the alloy.The morphology of the deposits from scanning electron microscope(SEM)images indicated that the electrode surface w as a three dimensional space w hich increased the effective surface area for the electrode reactions to take place.
基金Supported by Universiti Sains Malaysia Research University Grant(1001/PBIOLOGI/855003)
文摘Objective:To investigate the prevalence,phylogenetics and DNA barcoding of Zeylanicobdella arugamensis(Z.arugamensis) from crimson snapper(Lutjanus erythropterus),Jerejak Island,Penang,Malaysia.Methods:Experiment was conducted with 200 fish specimens of cultured Lutjanus erythropterus from Jerejak Island,Penang,Peninsular Malaysia.The water temperature and length for each fish were measured prior to parasites examination.Next,the morphological identification of parasites was performed.Genomic DNA from parasites was extracted for further molecular analysis.After PCR amplification,phylogenetic tree was constructed.The lowest Bayesian information criterion scores showed that the most compatible model is Tajima and Nei.Finally,data sets of cytochrome oxidase subunit I gene sequence and trace file have been submitted to Barcode of Life Data System.Results:The prevalence rate of Z.arugamensis was recorded to be 11.5%,and the intensity was 1.48.The low intensity was due to the water temperature recorded in this study(32.9–33.2 C).All the individuals of Z.arugamensis recorded in this study showed a close relationship with species that were recorded in NCBI database(Z.arugamensis DQ414344,Aestabdella leiostomi DQ414305,Pterobdella amara DQ414334 and Cystobranchus meyeri DQ414315) but less relationship with Aestabdella abditovesiculata DQ414300.Finally,the DNA sequences submitted to Barcode of Life Data System in accordance to species have already obtained Barcode Index Number as BOLD:ACM3477.Conclusions:This study has provided an overview of sequence divergence at cytochrome oxidase subunit I gene,DNA barcodes and parasite prevalence of Z.arugamensis.
文摘Ga-doped Yttrium Iron Garnet (Y_(3)Ga_(x)Fe_(5-x)O_(12),Ga:YIG) was prepared by solid state reaction method and sintering at 1 300 ℃.Rietveld analysis of X-ray diffraction patterns indicated that all samples crystallized in a single cubic structure (space group Ia-3d) with decreasing lattice constant as Ga concentration increased.SEM surface micrograph images of YIG samples showed highly compacted grains with small reduction in the grain size with increasing Ga concentration.Raman spectroscopy measurements confirmed the replacement of Fe^(3+) ions by Ga^(3+) ions in the garnet structure was revealed by the observed blue shifts in Raman spectra.The saturation magnetization decreased from 28.2 to 4.98 emu g^(-1) with increasing x from 0.0 to 1.0 due to the preferential substitution of Ga^(3+) ions for Fe^(3+) ions at tetrahedral sites.Room temperature Mössbauer spectra for the samples revealed a reduction of the hyperfine field values for octahedral and tetrahedral sites,and the development of additional components with increasing Ga concentration.Analysis of the magnetic data and Mössbauer spectra confirmed that spin canting in the substituted garnets plays an important role in explaining the observed reduction of the saturation magnetization as x increased.
基金funded by the National Natural Science Foundation of China (Grant No.11972018)sponsored by the Defense Pre-Research Joint Foundation of Chinese Ordnance Industry (Grant No. 6141B012858)。
文摘In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40 Cr Mn Si B steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thickness and the number of the circumferential divisions. The results show that as the tempering temperature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.
基金funding support from the Sichuan Science and Technology Program (Grant No. 2021YJ0511)the State Key Laboratory for Geo-Mechanics and Deep Underground Engineering,China University of Mining&Technology (Grant No.SKLGDUEK2111)the Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province (Grant No. ZJRMG-2020-01)。
文摘Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic electro-hydraulic servo press to study the evolution laws of physical and fracture properties of different deep rock materials under high-temperature geological conditions. The fracture characteristics were measured using an industrial camera and digital image correlation technology to analyze the effect of high temperature on fracture properties and failure modes of the CSTBD samples after different thermal treatments. The micro-damage properties of green sandstone and granite materials were obtained using a scanning electron microscope(SEM). The following conclusions were drawn from the test results:(1) With the increasing temperature, the fracture characteristics of green sandstone and granite change from brittle fracture to plasticity fracture, the longitudinal wave velocity of granite decreases sharply at 600℃, and the damage factor reaches 0.8748 at 700℃.(2) The fracture toughness of green sandstone and granite decreases with increasing temperature;however, the decreasing range of granite is larger than that of green sandstone.(3) As the temperature increases, the fracture morphologies of green sandstone and granite materials become rougher, whereas thermal damage cracks of granite and intergranular fractures inside sandstone as well as pores of sandstone increase.(4) The crack tip opening displacement and peak strain corresponding to peak load increase with the temperature.
文摘A silver nanostructures prepared by using chemical reduction method. The silver nanoparticles were prepared with diameters of about (20 nm). Numerous techniques had been used to study the optical, structural like the UV-Vis absorption spectrometer, Ttransmission Electron Microscopy (TEM), Field-Emission Scanning Electron microscope (FESEM), and X-ray diffraction (XRD). The practical results exhibited the absorption spectrum of the prepared nanoparticles at (357 nm), it was found that there is a relationship between the positions of the optical absorption peak and the size of the silver nanoparticles. The analysis of TEM results showed the presence of nanoparticles in the range (20 nm). The analyzing of XRD results explained the crystal structure for silver nanoparticles. It is found a cubic unit cell have a lattice constants (a = 4.0855 <span style="white-space:nowrap;">Å</span>), with the Miller indices were (111), (002), (002), and (113).
基金Funded by the Special Research on Civil Aircraft Quality,Airworthiness and Accident Investigation System (Phase I)-Quality and Reliability Assurance Systemthe National Natural Science Foundation of China (No. 51805500)Technical Foundation Project of Defense Industrial Technology Development Program (No. JSZL2019205C003)。
文摘In order to investigate the influence of natural defect on the fatigue behavior of 5A06/7A05 dissimilar aluminum alloys welding joint,fatigue tests of two types of specimens with and without defects were carried out systematically under stress amplitude control conditions (stress ratio R=0.1) at normal temperature in laboratory air condition.Furthermore,a new parameter,i e,fatigue defect effect factor (FDEF) was introduced to assess the effect of defect on fatigue strength.The fatigue failure analysis was conducted as well to compare the fatigue and fracture behavior of the two types of specimens.The results show that:(1) natural defects have a strong effect on the fatigue lives of welding joint,and the differences between the specimens with and without defects can reach 80 times under a same theoretical net sectional stress;(2) the FDEF parameter introduced is effective to deal with the defect effect,and the FDEF decreases along with the increase of fatigue life.The mean relative error between the experimental data and predicted fatigue strength based on the FDEF is 10.2%;(3) the macro fracture of both types of specimens have three typical zones,i e,fatigue source zone,crack propagation zone and final fracture zone,while there are more than one fatigue sources for specimens with natural defects.The overall pattern of crack propagation zone and fracture zone are quite similar,but the morphologies are different in details.
基金Supported by the National Science&Technology Pillar Program During the 12th Five-Year Plan Period(2014BAC28B01)Beijing Natural Science Foundation(8112012)
文摘Polyhydroxyalkanoates(PHAs)were synthesized in activated sludge using three types of carbon sources(sodium acetate,sodium propionate and sodium butyrate),and their characterization were studied.It was shown that the content of PHA synthesized by microorganisms in activated sludge were different.The biggest synthetic amount up to 36.7% of VSS was obtained when sodium acetate was used as carbon source.The polymer yield was lower when using sodium propionate as the carbon source than when using others,with25.1% of VSS,while resulted in an increase of hydroxyvalerate(HV)units produced.The structure and thermal properties of extracted biopolymers were analyzed by scanning electron microscope(SEM),Fourier transform infrared spectroscopy(FTIR)and themogravimetry(TG).
基金University of Engineering and Technology Lahore,Pakistanand NFC IET Multan,Pakistan for financial and technical support to complete the current research work。
文摘In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy from ambient vibrations have been revolutionized.There’s an absence of experiment-based investigation which incorporates the microstructure analysis and crystal morphology of those energy harvest home materials.Moreover,the impact of variable mechanical and thermal load conditions has seldom been studied within the previous literature to utilize the effectiveness of those materials in several practical applications like structural health monitoring(SHM),etc.In the proposed research work,scanning electron microscope(SEM)and energy dispersive x-ray(EDX)analysis are performed to examine the inside crystal morphology of PZT-5A and ensure the quality of the piezoelectric ceramic.Further,the performance of piezoelectric vibration-based energy harvester has been investigated in the second phase of current research work under the variable mechanical and thermal load conditions through a regular series of experiments.It’s been found that the output voltage of piezoelectric sensors will increase by increasing the applied load,whereas a decreasing trend in output voltage is noticed by increasing the applied temperature,resistance and frequency.Within the third part,a measuring setup is developed in the laboratory to further investigate the effectiveness of PZT-5A in practical applications such as electromechanical impedance(EMI)based structural health monitoring under the controlled heating environment.Therefore,this analysis not only evaluates the performance of PZT sensors under the variable operating conditions but also encourages developing a temperature compensation approach in EMI-based SHM.
基金Supported by Zhejiang Public Welfare Technology Application Research- Analysis and Test Project (LGC22C140001)Laboratory Work Research in Colleges and Universities of Zhejiang Province (ZD202104).
文摘[Objectives] The paper was to explore whether the microemulsion is a nano-pesticide. [Methods] Several microemulsions commonly available on the market were studied from the perspective of particle size and morphological characteristics. With ZIF nano-pesticide prepared earlier as the control, the changes in particle size of microemulsions diluted at different concentrations and the microscopic morphology of dispersed particles were tested and compared by dynamic light scattering laser particle size analyzer combined with scanning electron microscope. [Results] Conventional microemulsions were in dynamic equilibrium, and the particle size changed irregularly after dilution at different concentrations. Especially under scanning electron microscope, the particle distribution of pesticide-bearing droplets were uneven after drying, with aggregation and precipitation of large particles, while the particle size of nano-pesticide changed little after dilution at different concentrations, ranging from 1 to 300 nm. Moreover, the microscopic morphology of nano-pesticide observed under scanning electron microscope was in monodisperse nano state, without aggregation. [Conclusions] The particle size measured by dynamic light scattering alone can not judge whether the microemulsion is a nanometer pesticide, and it is necessary to observe the microscopic disperse state and particle size distribution with the help of electron microscopy.
文摘The antioxidant of seeds was carried out using extracts from methanol and Silver Nanoparticles from the spice. The SEM shows the shapes, dispersion and agglomeration of the sample, while the EDX confirms the SEM and the presence of some compounds. The FT-IR reveals the AgNP<sub>s</sub> capping and reducing the particular biomolecule from the functional group for identification. Compounds found in the FT-IR seeds of Capsicum annum are Ag L (Silver iodide), C K (Cyanogen chloride), P K (Phenol). Monodora myristica are Mo L (Molybdenum), Ag L (Silver iodide), C K (Cyanogen chloride), P K (Phenol), Mg K (Magnesium). Piper guineense are Ag L (Silver iodide), Ci K (Potassium chloride), C K (Cyanogen chloride), P K (Phenol). The seeds show that the AgNP<sub>S</sub> of CA and MM has a better antioxidant activity than the methanol of CA and MM, while the PG methanol has a better activity than the AgNP<sub>S</sub> PG. The control (Catechin and Galic acid) has a slight overall better DPPH activity than the AgNP<sub>S</sub>. It is important to note that there is a concentration dependency in CA, MM AgNP<sub>S,</sub> PG methanol respectively. Notably, at CA methanol, the conc. at 125 was higher than the conc. at 250. Hence, there is need to create a great part in using plant samples for making tabulated or capsulated drugs for treatment of diseases and using plant silver nanoparticles to develop a healthy food/drug preservative package material “smart packaging” that will enhance shelf-life.