A memory-type control chart utilizes previous information for chart construction.An example of a memory-type chart is an exponentially-weighted moving average(EWMA)control chart.The EWMA control chart is well-known an...A memory-type control chart utilizes previous information for chart construction.An example of a memory-type chart is an exponentially-weighted moving average(EWMA)control chart.The EWMA control chart is well-known and widely employed by practitioners for monitoring small and moderate process mean shifts.Meanwhile,the EWMA median chart is robust against outliers.In light of this,the economic model of the EWMA and EWMA median control charts are commonly considered.This study aims to investigate the effect of cost parameters on the out-of-control average run lengthðARL_(1)Þin implementing EWMA and EWMA median control charts.The economic model was used to compute the ARL_(1) parameter.The 14 input parameters were identified and the analysis was carried out based on the one-parameter-at-a-time basis.When the input parameters change based on a predetermined percentage,the ARL_(1) is affected.According to the results of the EWMA chart,nine input parameters had an effect andfive input parameters had no effect on the ARL_(1) parameter.Further,only seven of the 14 input parameters had an effect on the ARL_(1) of the EWMA median chart.However,the effect of each input parameter on the ARL_(1) was different.Moreover,the ARL_(1) for the EWMA median chart was smaller than the EWMA chart.This analysis is crucial to observe and determine the input parameters that have a significant impact on the ARL_(1) of the EMWA and EWMA median control charts.Hence,practitioners can obtain an overview of the influence of the input parameters on the ARL_(1) when implementing the EWMA and EWMA median control charts.展开更多
Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cos...Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cost and the expected cycle length. In this paper an alternative simple proof for the theorem is provided based on mathematical induction.展开更多
介绍了多变量统计过程控制(multivariate statistical process control,MSPC)的基本概念和有关背景。描述了MSPC实施的基本流程以及常用统计量与控制图。强调了MSPC在药品生产过程中的重要作用,特别是中药领域,为药品生产过程质量控制...介绍了多变量统计过程控制(multivariate statistical process control,MSPC)的基本概念和有关背景。描述了MSPC实施的基本流程以及常用统计量与控制图。强调了MSPC在药品生产过程中的重要作用,特别是中药领域,为药品生产过程质量控制方法的选择提供参考。总结了MSPC的优势和不足,并展望了MSPC在药品生产和质量控制方面的发展趋势。展开更多
The industrial organisations have a vested interest in quality and its practices in making a quantum leap, thereby requiring proper refocusing and rethinking. This is targeted seriously towards firms acquiring Knowled...The industrial organisations have a vested interest in quality and its practices in making a quantum leap, thereby requiring proper refocusing and rethinking. This is targeted seriously towards firms acquiring Knowledge Systems （KS） in order to nurture the employees＇ capabilities. Therefore, to enhance performances and their highly creative direction takes consideration of QE （quality engineering） and KS and disciplines complementary to each other. Additionally, the flow of operations and activities of the KS through the application of quality engineering （QE） principles is according to the view of Japanese engineer Taguchi. This aims to achieve good quality in the product design and processes, and also to anticipate problems that may occur before the shipping of the products. In this study, the use of quality control engineering and Taguchi＇s function methods in determining these properties and the loss caused by the company will be examined. However, the adopted approach of study scope to the society will aid KS. Also, efforts in this direction motivate the employment of a statistical method by Taguchi which relied on the principle of target-oriented quality, representing the value characterising the product quality.展开更多
基金funded by the Universiti Kebangsaan Malaysia,Geran Galakan Penyelidikan,GGP-2020-040.
文摘A memory-type control chart utilizes previous information for chart construction.An example of a memory-type chart is an exponentially-weighted moving average(EWMA)control chart.The EWMA control chart is well-known and widely employed by practitioners for monitoring small and moderate process mean shifts.Meanwhile,the EWMA median chart is robust against outliers.In light of this,the economic model of the EWMA and EWMA median control charts are commonly considered.This study aims to investigate the effect of cost parameters on the out-of-control average run lengthðARL_(1)Þin implementing EWMA and EWMA median control charts.The economic model was used to compute the ARL_(1) parameter.The 14 input parameters were identified and the analysis was carried out based on the one-parameter-at-a-time basis.When the input parameters change based on a predetermined percentage,the ARL_(1) is affected.According to the results of the EWMA chart,nine input parameters had an effect andfive input parameters had no effect on the ARL_(1) parameter.Further,only seven of the 14 input parameters had an effect on the ARL_(1) of the EWMA median chart.However,the effect of each input parameter on the ARL_(1) was different.Moreover,the ARL_(1) for the EWMA median chart was smaller than the EWMA chart.This analysis is crucial to observe and determine the input parameters that have a significant impact on the ARL_(1) of the EMWA and EWMA median control charts.Hence,practitioners can obtain an overview of the influence of the input parameters on the ARL_(1) when implementing the EWMA and EWMA median control charts.
文摘Rahim and Banerjee [1] developed a general model for the optimal design of x-control charts. The model minimizes the expected cost per unit time. The heart of the model is a theorem that derives the expected total cost and the expected cycle length. In this paper an alternative simple proof for the theorem is provided based on mathematical induction.
文摘介绍了多变量统计过程控制(multivariate statistical process control,MSPC)的基本概念和有关背景。描述了MSPC实施的基本流程以及常用统计量与控制图。强调了MSPC在药品生产过程中的重要作用,特别是中药领域,为药品生产过程质量控制方法的选择提供参考。总结了MSPC的优势和不足,并展望了MSPC在药品生产和质量控制方面的发展趋势。
文摘The industrial organisations have a vested interest in quality and its practices in making a quantum leap, thereby requiring proper refocusing and rethinking. This is targeted seriously towards firms acquiring Knowledge Systems （KS） in order to nurture the employees＇ capabilities. Therefore, to enhance performances and their highly creative direction takes consideration of QE （quality engineering） and KS and disciplines complementary to each other. Additionally, the flow of operations and activities of the KS through the application of quality engineering （QE） principles is according to the view of Japanese engineer Taguchi. This aims to achieve good quality in the product design and processes, and also to anticipate problems that may occur before the shipping of the products. In this study, the use of quality control engineering and Taguchi＇s function methods in determining these properties and the loss caused by the company will be examined. However, the adopted approach of study scope to the society will aid KS. Also, efforts in this direction motivate the employment of a statistical method by Taguchi which relied on the principle of target-oriented quality, representing the value characterising the product quality.
