A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheom...A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.展开更多
With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (but...With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (butylene terephthalate) (PBT) blends containing athermotropic LCP. The blend has zero entrance pressure loss, although the LCP has rather largeone. The viscosity curve of the blend lies between those of the LCP and PBT. The crystallizationof PBT is not affected by the presence of the LCP together with no indication oftransesterification between the two ingredients. LCP spheres and ellipsoids with the size of 0. 5--1. 5 μm disperse in PBT matrix uniformly, which is related to the viscosity ratio of the two components.展开更多
1 Introduction Four species of reactive thermotropic liquid crystalline polymer (LCMC) with different relative molecular weight were synthesized in this work (see scheme 1, n=2, 6, 10, ∞.n means number of repeat stru...1 Introduction Four species of reactive thermotropic liquid crystalline polymer (LCMC) with different relative molecular weight were synthesized in this work (see scheme 1, n=2, 6, 10, ∞.n means number of repeat structure unit). Their structure, morphology and properties were investigated systemically by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Wide-angle X-ray diffraction (WAXD), polarizing opticalmicroscopy (POM) and ubb...展开更多
The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12...The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.展开更多
A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phas...A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.展开更多
文摘A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.
基金Supported by the National Natural Science Foundation of China
文摘With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (butylene terephthalate) (PBT) blends containing athermotropic LCP. The blend has zero entrance pressure loss, although the LCP has rather largeone. The viscosity curve of the blend lies between those of the LCP and PBT. The crystallizationof PBT is not affected by the presence of the LCP together with no indication oftransesterification between the two ingredients. LCP spheres and ellipsoids with the size of 0. 5--1. 5 μm disperse in PBT matrix uniformly, which is related to the viscosity ratio of the two components.
基金National Natural Science Foundation of China (Grant No.50473060)
文摘1 Introduction Four species of reactive thermotropic liquid crystalline polymer (LCMC) with different relative molecular weight were synthesized in this work (see scheme 1, n=2, 6, 10, ∞.n means number of repeat structure unit). Their structure, morphology and properties were investigated systemically by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Wide-angle X-ray diffraction (WAXD), polarizing opticalmicroscopy (POM) and ubb...
文摘The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.
文摘A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.
