Based on selective volatilization taking place among elements in graphite furnace, a new method for direct determination of trace titanium in high purity yttrium oxide by fluorination electrothermal vaporization(FETV)...Based on selective volatilization taking place among elements in graphite furnace, a new method for direct determination of trace titanium in high purity yttrium oxide by fluorination electrothermal vaporization(FETV)/ICP AES has been proposed. The vaporization behavior of the analyte and matrix element was studied in detail. Various factors of influence on vaporization of analyte were also investigated. Under optimal experimental conditions, the detection limit(3 σ ) of Ti is 1 0 ng/ml, and the RSD is 2 3%( n =10, c =0 2 μg/ml). The proposed method is simple, rapid and sensitive, and pretreatment is not necessary. This method can be used to directly determine trace refractory impurity titanium in high purity powder sample(Y 2O 3). The recovery for sample analysis is more than 96%.展开更多
利用四氯化钛为前驱体,制备了不同氟掺杂量的钛柱撑蒙脱石。通过X射线衍射、傅立叶转换红外光谱、透射电子显微镜及比表面积、孔隙度分析等手段对材料结构进行表征,并考察了不同氟掺杂量的钛柱撑蒙脱石对饮用水中微量砷的吸附作用。结...利用四氯化钛为前驱体,制备了不同氟掺杂量的钛柱撑蒙脱石。通过X射线衍射、傅立叶转换红外光谱、透射电子显微镜及比表面积、孔隙度分析等手段对材料结构进行表征,并考察了不同氟掺杂量的钛柱撑蒙脱石对饮用水中微量砷的吸附作用。结果表明,氢氟酸掺杂量为20 m L的20HF-Ti-MMT形成了钛柱撑结构,材料中的锐钛矿型二氧化钛颗粒粒度分布均匀,结晶度好,材料颗粒均匀,晶型完整,稳定性良好,由于比表面积大和表面羟基含量多等特点对饮用水中微量砷的吸附效果较佳,砷吸附率最高为99.76%。展开更多
文摘Based on selective volatilization taking place among elements in graphite furnace, a new method for direct determination of trace titanium in high purity yttrium oxide by fluorination electrothermal vaporization(FETV)/ICP AES has been proposed. The vaporization behavior of the analyte and matrix element was studied in detail. Various factors of influence on vaporization of analyte were also investigated. Under optimal experimental conditions, the detection limit(3 σ ) of Ti is 1 0 ng/ml, and the RSD is 2 3%( n =10, c =0 2 μg/ml). The proposed method is simple, rapid and sensitive, and pretreatment is not necessary. This method can be used to directly determine trace refractory impurity titanium in high purity powder sample(Y 2O 3). The recovery for sample analysis is more than 96%.
文摘利用四氯化钛为前驱体,制备了不同氟掺杂量的钛柱撑蒙脱石。通过X射线衍射、傅立叶转换红外光谱、透射电子显微镜及比表面积、孔隙度分析等手段对材料结构进行表征,并考察了不同氟掺杂量的钛柱撑蒙脱石对饮用水中微量砷的吸附作用。结果表明,氢氟酸掺杂量为20 m L的20HF-Ti-MMT形成了钛柱撑结构,材料中的锐钛矿型二氧化钛颗粒粒度分布均匀,结晶度好,材料颗粒均匀,晶型完整,稳定性良好,由于比表面积大和表面羟基含量多等特点对饮用水中微量砷的吸附效果较佳,砷吸附率最高为99.76%。
