In order to make the relevant risk departments and the agricultural producers have a clearer understanding of maize cold damage, the data of daily average temperature of 83 meteorological stations in Heilongjiang Prov...In order to make the relevant risk departments and the agricultural producers have a clearer understanding of maize cold damage, the data of daily average temperature of 83 meteorological stations in Heilongjiang Province from 1986 to 2015, and the risk assessment model of maize cold damage in northeast China were used, and the risk index values of maize cold damage in Heilongjiang Province from 1986 to 2015 were calculated. And according to the risk index values, Heilongjiang Province was divided into five risk areas. The results showed that the high risk areas and the sub-high risk areas of maize cold damage in Heilongjiang Province in recent 30 years were in Daqing and Suihua cities, the medium risk areas were located in the center of the Songnen Plain and other regions, the sub-low risk areas were located in the Songnen Plain, and most of the rest were the low risk areas.展开更多
Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Mach...Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Machine Systems (HEMSs), to store cold energy is a key to solve the heat damage problems in deep mines. Based on the geological conditions, thermodynamic and hydraulic parameters of Jiahe Mine, the isotherms in the period of cold energy storage and refrigeration and the volumes of cold water within different temperature ranges of the cold energy storage well were numerically analyzed. The results show that 1) with the same pumped and injected water volumes, the lower the temperature of injected water is, the larger the volume of cold water in the cold energy storage well is. With the larger volume, the effect of cold energy storage is better. 2) the larger the volumes of pumped and reinjected water are, the larger the volume of cold water from the cold energy storage well is. With the larger volume, the effect of refrigeration is better. And 3) without disturbance, the volume and temperature of cold water in the cold energy storage well can keep unchanged or have only a little change for a long time. Therefore the technology of doublet wells for cold energy storage is feasible and the cold energy storage aquifers can meet the requirement of the technology.展开更多
Combined with remote sensing data and meteorological data, cold damage risk was assessed for planting area of double cropping rice (DCR) in Hunan Province, China. A new methodology of cold damage risk assessment was b...Combined with remote sensing data and meteorological data, cold damage risk was assessed for planting area of double cropping rice (DCR) in Hunan Province, China. A new methodology of cold damage risk assessment was built that apply to grid and have clear hazard-affected body. Each station cold damage annual frequency and average annual intensity of cold damage was calculated by using 1951-2010 station daily mean temperature and simple cold damage identification index. On this basis, average annual cold damage risk index was obtained by their product. The spatial analysis models of cold damage risk index about double-season early rice (DSER) and double-season later rice (DSLR) were established respectively by the relation of average annual cold damage risk index and its geographic factors. Critical threshold of level of average annual cold damage risk index for DSER and DSLR were respectively divided by the correlative equation of cold damage annual frequency and average annual intensity of cold damage. 2001-2010 planting area of DCR, acquired by time series analysis of MOD09A1 8-d composite land surface reflectance product, was as target of assessment. The results show average annual intensity of cold damage is exponential function of cold damage annual frequency, average annual cold damage risk index is directly proportional to cold damage cumulant and cold damage annual frequency, and is inversely proportional to happen times of cold damage and the square of statistical time sequence length. Cold damage risk of DSER is higher than DSLR in Hunan Province. In the 10-yr stacking map, DCR planting in low risk area accounted for 11.92% of total extraction area, in moderate risk area accounted for 69.62%, in high risk area accounted for 18.46%. According to the cold damage risk assessment result, DCR production can be guided to reduce cold damage losses.展开更多
In recent years,metal matrix syntactic foams(MMSFs)have become highly attractive owing to their unique physical,microstructural and mechanical features.Due to their promising potential for different industrial areas l...In recent years,metal matrix syntactic foams(MMSFs)have become highly attractive owing to their unique physical,microstructural and mechanical features.Due to their promising potential for different industrial areas like automotive,aviation,and defense,these advanced engineering materials can also be evaluated as serious alternatives to particle reinforced metallic composites and conventional metallic foams.Differently from previously reported laboratory scaled techniques in the literature,this experimental effort focuses on the feasibility of MMSF manufacturing via a fully automated and industrial-based cold chamber die casting technique.Accordingly,1-2 mm,2-4 mm,and bimodal(50vol.%)natural-based pumice filled aluminum syntactic foams were manufactured utilizing a purpose-made casting machine.Physical,macroscopic,and microscopic examinations show that all of the fabricated samples display perfect matrix/filler harmony.Average density levels of fabricated syntactic foams range between 1.50 and 1.80 g·cm^(-3) depending upon the pumice particles size interval.To assess mechanical responses,quasi-static compression tests were performed.Furthermore,half of the foam samples were subjected to heat treatment to explore possible influences of aging on the compressive features and damage modes.Results indicate that although the heat treatment enhances the compressive strength,plateau stress,and energy absorption properties of the fabricated foams,it changes damage mode of the samples by causing brittle dominant deformation.展开更多
文摘In order to make the relevant risk departments and the agricultural producers have a clearer understanding of maize cold damage, the data of daily average temperature of 83 meteorological stations in Heilongjiang Province from 1986 to 2015, and the risk assessment model of maize cold damage in northeast China were used, and the risk index values of maize cold damage in Heilongjiang Province from 1986 to 2015 were calculated. And according to the risk index values, Heilongjiang Province was divided into five risk areas. The results showed that the high risk areas and the sub-high risk areas of maize cold damage in Heilongjiang Province in recent 30 years were in Daqing and Suihua cities, the medium risk areas were located in the center of the Songnen Plain and other regions, the sub-low risk areas were located in the Songnen Plain, and most of the rest were the low risk areas.
基金Project 50490270 supported by Key Project of National Natural Science Foundation of China
文摘Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Machine Systems (HEMSs), to store cold energy is a key to solve the heat damage problems in deep mines. Based on the geological conditions, thermodynamic and hydraulic parameters of Jiahe Mine, the isotherms in the period of cold energy storage and refrigeration and the volumes of cold water within different temperature ranges of the cold energy storage well were numerically analyzed. The results show that 1) with the same pumped and injected water volumes, the lower the temperature of injected water is, the larger the volume of cold water in the cold energy storage well is. With the larger volume, the effect of cold energy storage is better. 2) the larger the volumes of pumped and reinjected water are, the larger the volume of cold water from the cold energy storage well is. With the larger volume, the effect of refrigeration is better. And 3) without disturbance, the volume and temperature of cold water in the cold energy storage well can keep unchanged or have only a little change for a long time. Therefore the technology of doublet wells for cold energy storage is feasible and the cold energy storage aquifers can meet the requirement of the technology.
基金funded by the Key Technologies R&D Program of China during the 12th Five-Year Plan period(2011BAD32B01)the National Natural Science Foundation of China(40875070)the Research Fund for Doctoral Program of Higher Education,China(20100101110035)
文摘Combined with remote sensing data and meteorological data, cold damage risk was assessed for planting area of double cropping rice (DCR) in Hunan Province, China. A new methodology of cold damage risk assessment was built that apply to grid and have clear hazard-affected body. Each station cold damage annual frequency and average annual intensity of cold damage was calculated by using 1951-2010 station daily mean temperature and simple cold damage identification index. On this basis, average annual cold damage risk index was obtained by their product. The spatial analysis models of cold damage risk index about double-season early rice (DSER) and double-season later rice (DSLR) were established respectively by the relation of average annual cold damage risk index and its geographic factors. Critical threshold of level of average annual cold damage risk index for DSER and DSLR were respectively divided by the correlative equation of cold damage annual frequency and average annual intensity of cold damage. 2001-2010 planting area of DCR, acquired by time series analysis of MOD09A1 8-d composite land surface reflectance product, was as target of assessment. The results show average annual intensity of cold damage is exponential function of cold damage annual frequency, average annual cold damage risk index is directly proportional to cold damage cumulant and cold damage annual frequency, and is inversely proportional to happen times of cold damage and the square of statistical time sequence length. Cold damage risk of DSER is higher than DSLR in Hunan Province. In the 10-yr stacking map, DCR planting in low risk area accounted for 11.92% of total extraction area, in moderate risk area accounted for 69.62%, in high risk area accounted for 18.46%. According to the cold damage risk assessment result, DCR production can be guided to reduce cold damage losses.
文摘In recent years,metal matrix syntactic foams(MMSFs)have become highly attractive owing to their unique physical,microstructural and mechanical features.Due to their promising potential for different industrial areas like automotive,aviation,and defense,these advanced engineering materials can also be evaluated as serious alternatives to particle reinforced metallic composites and conventional metallic foams.Differently from previously reported laboratory scaled techniques in the literature,this experimental effort focuses on the feasibility of MMSF manufacturing via a fully automated and industrial-based cold chamber die casting technique.Accordingly,1-2 mm,2-4 mm,and bimodal(50vol.%)natural-based pumice filled aluminum syntactic foams were manufactured utilizing a purpose-made casting machine.Physical,macroscopic,and microscopic examinations show that all of the fabricated samples display perfect matrix/filler harmony.Average density levels of fabricated syntactic foams range between 1.50 and 1.80 g·cm^(-3) depending upon the pumice particles size interval.To assess mechanical responses,quasi-static compression tests were performed.Furthermore,half of the foam samples were subjected to heat treatment to explore possible influences of aging on the compressive features and damage modes.Results indicate that although the heat treatment enhances the compressive strength,plateau stress,and energy absorption properties of the fabricated foams,it changes damage mode of the samples by causing brittle dominant deformation.
