The violent vibration of supersonic wings threatens aircraft safety.This paper proposes the strongly nonlinear acoustic metamaterial(NAM)method to mitigate aeroelastic vibration in supersonic wing plates.We employ the...The violent vibration of supersonic wings threatens aircraft safety.This paper proposes the strongly nonlinear acoustic metamaterial(NAM)method to mitigate aeroelastic vibration in supersonic wing plates.We employ the cantilever plate to simulate the practical behavior of a wing.An aeroelastic vibration model of the NAM cantilever plate is established based on the mode superposition method and a modified third-order piston theory.The aerodynamic properties are systematically studied using both the timedomain integration and frequency-domain harmonic balance methods.While presenting the flutter and post-flutter behaviors of the NAM wing,we emphasize more on the preflutter broadband vibration that is prevalent in aircraft.The results show that the NAM method can reduce the low-frequency and broadband pre-flutter steady vibration by 50%-90%,while the post-flutter vibration is reduced by over 95%,and the critical flutter velocity is also slightly delayed.As clarified,the significant reduction arises from the bandgap,chaotic band,and nonlinear resonances of the NAM plate.The reduction effect is robust across a broad range of parameters,with optimal performance achieved with only 10%attached mass.This work offers a novel approach for reducing aeroelastic vibration in aircraft,and it expands the study of nonlinear acoustic/elastic metamaterials.展开更多
A multi-degree-of-freedom device is proposed,which can achieve efficient vibration reduction as the main objective and energy harvesting as the secondary purpose.The device comprises a multiscale nonlinear vibration a...A multi-degree-of-freedom device is proposed,which can achieve efficient vibration reduction as the main objective and energy harvesting as the secondary purpose.The device comprises a multiscale nonlinear vibration absorber(NVA)and piezoelectric components.Energy conversion and energy measurement methods are used to evaluate the device performance from multiple perspectives.Research has shown that this device can efficiently transfer transient energy from the main structure and convert a portion of transient energy into electrical energy.Main resonance and higher-order resonance are the main reasons for efficient energy transfer.The device can maintain high vibration reduction performance even when the excitation amplitude changes over a large range.Compared with the single structures with and without precompression,the multiscale NVA-piezoelectric device offers significant vibration reduction advantages.In addition,there are significant differences in the parameter settings of the two substructures for vibration reduction and energy harvesting.展开更多
By considering electromechanical coupling, a unified dynamic model of the cylindrical shell with the piezoelectric shunt damping patch(PSDP) is created. The model is universal and can simulate the vibration characteri...By considering electromechanical coupling, a unified dynamic model of the cylindrical shell with the piezoelectric shunt damping patch(PSDP) is created. The model is universal and can simulate the vibration characteristic of the shell under different states including the states in which PSDP cannot be connected, partially connected, and completely connected to the shunt circuit. The equivalent loss factor and elastic modulus with frequency dependence are proposed to consider the electrical damping effect of resistance shunt circuits. Moreover, the semi-analytical dynamic equation of the cylindrical shell with PSDP is derived by the Lagrange equation. An experimental test is carried out on the cylindrical shell with PSDP to verify the vibration suppression ability of PSDP on the cylindrical shell and the correctness of the proposed model. Furthermore, the parameter analysis shows that determining the appropriate resistance value in the shunt circuit can achieve a good vibration suppression effect.展开更多
In this paper,the metal hydraulic engine mount (HEM) with the orifice is presented,the construction of HEM is consist of hydraulic cylinder and the spring on the bottom,its mechanical model is given and dynamics equat...In this paper,the metal hydraulic engine mount (HEM) with the orifice is presented,the construction of HEM is consist of hydraulic cylinder and the spring on the bottom,its mechanical model is given and dynamics equations are set up with considering kinematics conditions and continuous of fluid,the dynamics behavior of HEM including dynamic stiffness of fluid and transferability of HEM are studied here.The example of hydraulic engine mount is calculated,it is shown that the vibration reduction performance of the hydraulic engine mount of this paper is better.The analysis method of vibration reduction behavior for HEM in this paper can be used in designing of the reduction vibration devices and the HEM in this paper can be used in the practical engineering for reduction vibration.展开更多
Because of their elastic links and joints,high-speed parallel robots for pick-and-place operations inevitably suffer from residual vibrations that significantly degrade their positioning accuracy.An effective approach...Because of their elastic links and joints,high-speed parallel robots for pick-and-place operations inevitably suffer from residual vibrations that significantly degrade their positioning accuracy.An effective approach based on the input shaping technique is presented in this paper for suppressing the residual vibration in these parallel robots.After addressing the design principle of an input shaper for a parallel robot with flexible actuated joints,a robust optimal input shaper is developed by considering the configuration-dependent flexible modes and minimizing the maximum percentage of residual vibration at the end-effector.The input shaper allows a good overall performance to be achieved throughout the entire workspace.Experimental results on a 4-DOF SCARA-type parallel robot show that the residual vibration of the end-effector is dramatically reduced and the dynamic positioning accuracy of the robot significantly improved.展开更多
A generalized scheme based on the sliding mode and component synthesis vibration suppression (CSVS) method has been proposed for the rotational maneuver and vibration suppression of an orbiting spacecraft with flexibl...A generalized scheme based on the sliding mode and component synthesis vibration suppression (CSVS) method has been proposed for the rotational maneuver and vibration suppression of an orbiting spacecraft with flexible appendages. The proposed control design process is twofold: design of the attitude controller followed by the design of a flexible vibration attenuator. The attitude controller using only the attitude and the rate information for the flexible spacecraft (FS) is designed to serve two purposes: it forces the attitude motion onto a pre-selected sliding surface and then guides it to the state space origin. The shaped command input controller based on the CSVS method is designed for the reduction of the flexible mode vibration, which only requires information about the natural frequency and damping of the closed system. This information is used to discretize the input so that minimum energy is injected via the controller to the flexible modes of the spacecraft. Additionally, to extend the CSVS method to the system with the on-off actuators, the pulse-width pulse-frequency (PWPF) modulation is introduced to control the thruster firing and integrated with the CSVS method. PWPF modulation is a control method that provides pseudo-linear operation for an on-off thruster. The proposed control strategy has been implemented on a FS, which is a hub with symmetric cantilever flexible beam appendages and can undergo a single axis rotation. The results have been proven the potential of this technique to control FS.展开更多
A large model box was developed in our experiment to study the vibration reduction effect.Five hydraulic highperformance actuators are arranged in the upper part of the model box.There is a time difference between adj...A large model box was developed in our experiment to study the vibration reduction effect.Five hydraulic highperformance actuators are arranged in the upper part of the model box.There is a time difference between adjacent actuators,which can simulate the train induced vibration.To reduce vibration a composite barrier is designed;the barrier consists of a honeycomb concrete canvas and PE polymer water bags.The concrete canvas can be mixed with water to produce a hydration reaction to form a structure with a certain hardness.By simulating different train speeds and loads,vertical vibration velocity,and acceleration before and after the barrier are compared and analyzed.The experimental results show that the new barrier can achieve a good vibration reduction effect.When the simulated train speed increases,the damping effect of the barrier is improved.At a speed of 180 km/h,an amplitude of 1.5 m after the barrier is found to be 48.6%lower than that before the barrier.Velocity decreases by 24.2%at 36 km/h and by 38.1%at 108 km/h.展开更多
Based on dynamical theories of water waves and dynamics of Mindlin thick plates, the investigation of the wave-induced responses and the vibration reduction of an elastic floating plate are presented using the Wiener-...Based on dynamical theories of water waves and dynamics of Mindlin thick plates, the investigation of the wave-induced responses and the vibration reduction of an elastic floating plate are presented using the Wiener-Hopf technique. Without regard to the case of elastic connector, the calculated results obtained by the present method are in good agreement with those from the literature and the experiment. It can be shown that the present method is valid. Relations between the spring stiffness to be used to connect the sea bottom and the floating plate and the parameters of wave-induced responses of floating plates are investigated using the present method. Therefore, these results can be used as theoretical bases for the design stage of super floating platform systems.展开更多
The diagonal inerter is integrated into a suspension vibration reduction system(SVRS).The dynamic model of the SVRS with diagonal inerter and damping is established.The dynamic model is of strong geometric nonlinearit...The diagonal inerter is integrated into a suspension vibration reduction system(SVRS).The dynamic model of the SVRS with diagonal inerter and damping is established.The dynamic model is of strong geometric nonlinearity.The retaining nonlinearity up to cubic terms is validated under impact excitation.The conditions omitting the static deformation are determined.The effects of the diagonal inerter on the vibration reduction performance of the SVRS are explored under impact and random excitations.The vibration reduction performance of the proposed SVRS with both diagonal inerter and damping is better than that of either the SVRS without them or the SVRS with the diagonal damping only.展开更多
A novel distributed tuned liquid damper (DTLD) for reducing vibration in structures is proposed in this paper. The basic working principle of the DTLDs is to fill the empty space inside the pipes or boxes of cast-in...A novel distributed tuned liquid damper (DTLD) for reducing vibration in structures is proposed in this paper. The basic working principle of the DTLDs is to fill the empty space inside the pipes or boxes of cast-in-situ hollow reinforced concrete (RC) floor slabs with water or other liquid. The pipes or boxes then work as a series of small TLDs inside the structure, to increase the damping ratio of the entire structural system. Numerical simulation that accounts for the fluid- structure conpling effect is carried out to evaluate the vibration-reduction efficiency of the DTLDs. The results show that the DTLDs are able to considerably increase the damping of the structure and thus reduce its vibration. An additional benefit is that the DTLDs do not require architectural space to be added to the structure.展开更多
The epoxy resin (E-51) was used as polymer matrix,conductive carbon black (CB) as conductive filler,and PZT was used to prepare a composite by curing.The effects of PZT and CB content on the properties of PZT/ CB/ EP ...The epoxy resin (E-51) was used as polymer matrix,conductive carbon black (CB) as conductive filler,and PZT was used to prepare a composite by curing.The effects of PZT and CB content on the properties of PZT/ CB/ EP piezoelectric composite were studied.When the PZT content reaches 40 wt%,the optimized vibration attenuation properties of PZT/CB/EP materials could be achieved with a loss factor of 0.9 from room temperature to 60 ℃.With the increase of PZT content,the bending strength of PZT/CB/EP piezoelectric composite vibration reduction material firstly increased from 45 MPa to 65 MPa and then decreased to 38 MPa.At room temperature,the dielectric constant increased from 7 to 50,and the dielectric loss increased from 0.1 to 0.5.展开更多
The centrifugal air compressor outlet pipeline vibration was not decreased after barrel viscous dampers were installed in a petrochemical plant in Tianjin.A pipeline-damper experiment apparatus was built for studying ...The centrifugal air compressor outlet pipeline vibration was not decreased after barrel viscous dampers were installed in a petrochemical plant in Tianjin.A pipeline-damper experiment apparatus was built for studying the influence factors of the barrel viscous damper and pipe hoop in pipeline vibration reduction.The performance of the damper under different frequency and amplitude was researched respectively,the results showed that damping effect dependsed mainly on frequency and was not related to amplitude.Damper will fail when its vibration frequency exceeds its limit working frequency which was 40 Hz in test.The mechanical properties and energy dissipation were analyzed by using the Maxwell model,which explains experimental results well.According to damping effect and calculation of stiffness with ANSYS in different hoop width,hoop stiffness should match pipe stiffness and keep uniform along transfer path.Damping effect will get worse when local stiffness is too small or too large.Finally,the outlet pipeline vibration was decreased by 70%after using appropriate pipe hoop width and replacing the original damping liquid.展开更多
Using the method of structural finite element topology optimization and analysis of the hindwings of Trypoxylus dichotomus,this work identified the main loading force transmission path and designed the initial structu...Using the method of structural finite element topology optimization and analysis of the hindwings of Trypoxylus dichotomus,this work identified the main loading force transmission path and designed the initial structure of a bionic flexible wing.A structural design scheme of the vibration damping unit was proposed,and the structural mechanics and modal vibration characteristics were simulated and analyzed.3D printing technology was used to manufacture the designed bionic wing skeleton,which was combined with two kinds of wing membrane materials.The Flapping Wing Micro-aerial Vehicle(FWMAV)transmission mechanism vibration characteristics were observed and analyzed by a high-speed digital camera.A triaxial force transducer was used to record the force vibration of the flexible bionic wing flapping in a wind tunnel.A wavelet processing method was used to process and analyze the force signal.The results showed that the force amplitude was more stable,the waveform roughness was the lowest,and the peak shaving phenomenon at the z-axis was the least obvious for the bionic flexible wing model that combined the topology-optimized bionic wing skeleton with a polyamide elastic membrane.This was determined to be the most suitable design scheme for the wings of FWMAVs.展开更多
Levitation failure occasionally occurs when a maglev vehicle runs on a track. At the moment of levitation failure, the levitation module falls and hits the track, and there is a violent impact on the maglev vehicle-br...Levitation failure occasionally occurs when a maglev vehicle runs on a track. At the moment of levitation failure, the levitation module falls and hits the track, and there is a violent impact on the maglev vehicle-bridge coupled system. In this paper, the response of the maglev vehicle-bridge coupled system at the moment of and after levitation failure is analyzed, and three methods of reducing the vibration are proposed. First, a dynamics model of the maglev vehicle-bridge coupled system, which considers the control system, five flexible bridges, and track irregularity, is established, and the correctness of the model is verified using test data. The system response for different failure cases is then analyzed. Finally, the three methods of reducing vibration under levitation failure are proposed, and their effectiveness is evaluated. The results show that the failure position and speed barely affect the response, whereas the maximum impact forces due to levitation failure reduced by 13%, 63%, and 50% by adopting the three methods, namely connecting the first and third coils in series, coupling the ends of the levitation module vertically, and adopting two sets of anti-roll devices, respectively. When the latter two schemes are combined, the maximum impact force reduced from 133 kN(without vibration-reduction measures) to 9 kN, and the vibration-reduction measure is also effective for failures of the levitation units at the ends of the vehicle.展开更多
The paper presents an analytical study of the helicopter rotor vibratory loadreduction design optimization with aeroelastic stability constraints. The composite rotor blade ismodeled by beam type finite elements, and ...The paper presents an analytical study of the helicopter rotor vibratory loadreduction design optimization with aeroelastic stability constraints. The composite rotor blade ismodeled by beam type finite elements, and warping deformation is taken into consideration for2-dimension analysis, while the one-dimension nonlinear differential equations of blade motion areformulated via Hamilton's principle. The rotor hub vibratory loads is chosen as the objectivefunction, while rotor blade section construction parameter, composite material ply structure andblade tip swept angle as the design variables, and au-torotation inertia, natural frequency andaeroelastic stability as the constraints. A 3-bladed rotor is designed, as an example, based on thevibratory hub load reduction optimization process with swept tip angle and composite material. Thecalculating results show a 24. 9 percent-33 percent reduction of 3/rev hub loads in comparison withthe base-line rotor.展开更多
Experimental results of sound transmission loss in a range of frequency through bubbly curtains were obtained, where the air content was in a wide range by means of varying pressure differences and the diameters of th...Experimental results of sound transmission loss in a range of frequency through bubbly curtains were obtained, where the air content was in a wide range by means of varying pressure differences and the diameters of the pores of bubble-produce apparatus . Vibration reduction of a vessel in water due to the bubbly curtain was found.展开更多
To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper ...To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper constructs pure nonlinear stiffness without neglecting the gravity effect of the oscillator. Both analytical and numerical methods are used to evaluate the performance of the NES-IA. The research findings indicate that even if the actual mass is 1% of the main oscillator, the NES-IA with proper inertia angles and mass distribution ratios can still effectively attenuate the steady-state and transient responses of the main oscillator. Nonlinear stiffness and damping also have important effects. Due to strongly nonlinear factors, the coupled system may exhibit higher branch responses under harmonic excitation. In shock excitation environment, the NES-IA with a large dynamic mass can trigger energy capture of both main resonance and high-frequency resonance. Furthermore, the comparison with the traditional NES also confirms the advantages of the NES-IA in overcoming mass dependence.展开更多
An isolation trench is a simple and effective method to isolate structural vibrations originating from sources of vibration other than earthquakes(machines,traffic,explosions,etc.);however,there is still not a conclus...An isolation trench is a simple and effective method to isolate structural vibrations originating from sources of vibration other than earthquakes(machines,traffic,explosions,etc.);however,there is still not a conclusive depth of the isolation trench for frame structures.To investigate the isolation effect of a trench in the frame structure designed for ground vibration,both a field test and finite element analysis were conducted to analyze the reduced effect of the vibration.The vibration reduction analysis was based on the dynamic equation and wave theory.Considering the vibration control of an industrial plant frame,a soil-trench-building finite element model was built to analyze the vibration characteristics of the floor before and after the open isolation trench structure was used.According to the model,a dynamic test was carried out on the frame structure to assess the effect of the vibration reduction by introducing the trench.The results showed that the depth of the trench was the dominating factor in vibration isolation.When the depth of the trench reached 1~1.3 times the wavelength of the Rayleigh wave,the damping effect was the strongest.the width of the trench has little effect on the vibration isolation efficiency,and the trench must be maintained at a certain distance from the building to ensure the vibration damping efficiency.The vibration of each floor was obviously reduced after the trench was built.The vibration damping effect of the trench was significant.展开更多
Vibratory driving is the most efficient method of sheet pile installation. The elimination or at least reduction of harmful consequences of sheet pile vibratory driving becomes an increasingly important and often the ...Vibratory driving is the most efficient method of sheet pile installation. The elimination or at least reduction of harmful consequences of sheet pile vibratory driving becomes an increasingly important and often the decisive factor in the selection of the excavation protection technology. In difficult soil conditions with strength soil parameters, pressure water jetting precedes sheet pile driving. This technique changes the soil properties, destroying its existing structure near the installed sheet pile. Unfortunately, the results and achievements of contractors using this technique are very often held confidential or simply remain in the records and it is difficult to find papers on this subject. This article features a detailed description of jet-assisted sheet pile driving, including a prefabrication description for the sheet pile toe used to jet water through, water pressure and quantity data and the results with regard to reduce vibrations and noise, as well as to the increase in sheet pile vibratory driving performance.展开更多
To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics...To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics are analyzed and a friction damper is designed. The effect on an unbalanced response is studied. Results show that the stiffness factor and the friction-damping factor of the damper are related to the cone angle and the friction factor of the inner-ring when adopting a proper structure. By changing these parameters and the Z-directional stiffness of the outer-ring, the stiffness and the damping characteristic of the damper can be varied. Introducing a friction damper into the support can reduce the stiffness and increase the damping of the support, thus decreasing the critical speed to avoid the operating speed, suppress the resonant response of a rotor system, and attenuate vibration forces to the outside.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52241103,52322505,and 11991032)the Natural Science Foundation of Hunan Province of China(No.2023JJ10055)。
文摘The violent vibration of supersonic wings threatens aircraft safety.This paper proposes the strongly nonlinear acoustic metamaterial(NAM)method to mitigate aeroelastic vibration in supersonic wing plates.We employ the cantilever plate to simulate the practical behavior of a wing.An aeroelastic vibration model of the NAM cantilever plate is established based on the mode superposition method and a modified third-order piston theory.The aerodynamic properties are systematically studied using both the timedomain integration and frequency-domain harmonic balance methods.While presenting the flutter and post-flutter behaviors of the NAM wing,we emphasize more on the preflutter broadband vibration that is prevalent in aircraft.The results show that the NAM method can reduce the low-frequency and broadband pre-flutter steady vibration by 50%-90%,while the post-flutter vibration is reduced by over 95%,and the critical flutter velocity is also slightly delayed.As clarified,the significant reduction arises from the bandgap,chaotic band,and nonlinear resonances of the NAM plate.The reduction effect is robust across a broad range of parameters,with optimal performance achieved with only 10%attached mass.This work offers a novel approach for reducing aeroelastic vibration in aircraft,and it expands the study of nonlinear acoustic/elastic metamaterials.
基金Project supported by the National Natural Science Foundation of China(Nos.11972050 and 12332001)。
文摘A multi-degree-of-freedom device is proposed,which can achieve efficient vibration reduction as the main objective and energy harvesting as the secondary purpose.The device comprises a multiscale nonlinear vibration absorber(NVA)and piezoelectric components.Energy conversion and energy measurement methods are used to evaluate the device performance from multiple perspectives.Research has shown that this device can efficiently transfer transient energy from the main structure and convert a portion of transient energy into electrical energy.Main resonance and higher-order resonance are the main reasons for efficient energy transfer.The device can maintain high vibration reduction performance even when the excitation amplitude changes over a large range.Compared with the single structures with and without precompression,the multiscale NVA-piezoelectric device offers significant vibration reduction advantages.In addition,there are significant differences in the parameter settings of the two substructures for vibration reduction and energy harvesting.
基金Project supported by the National Natural Science Foundation of China (No. 12272087)。
文摘By considering electromechanical coupling, a unified dynamic model of the cylindrical shell with the piezoelectric shunt damping patch(PSDP) is created. The model is universal and can simulate the vibration characteristic of the shell under different states including the states in which PSDP cannot be connected, partially connected, and completely connected to the shunt circuit. The equivalent loss factor and elastic modulus with frequency dependence are proposed to consider the electrical damping effect of resistance shunt circuits. Moreover, the semi-analytical dynamic equation of the cylindrical shell with PSDP is derived by the Lagrange equation. An experimental test is carried out on the cylindrical shell with PSDP to verify the vibration suppression ability of PSDP on the cylindrical shell and the correctness of the proposed model. Furthermore, the parameter analysis shows that determining the appropriate resistance value in the shunt circuit can achieve a good vibration suppression effect.
基金Supported by National Fund Committee for Study Abroad
文摘In this paper,the metal hydraulic engine mount (HEM) with the orifice is presented,the construction of HEM is consist of hydraulic cylinder and the spring on the bottom,its mechanical model is given and dynamics equations are set up with considering kinematics conditions and continuous of fluid,the dynamics behavior of HEM including dynamic stiffness of fluid and transferability of HEM are studied here.The example of hydraulic engine mount is calculated,it is shown that the vibration reduction performance of the hydraulic engine mount of this paper is better.The analysis method of vibration reduction behavior for HEM in this paper can be used in designing of the reduction vibration devices and the HEM in this paper can be used in the practical engineering for reduction vibration.
基金Supported by National Natural Science Foundation of China(Grant No.51721003)State Key Laboratory of Robotics and System(HIT)(Grant No.SKLRS–2018–KF-09)。
文摘Because of their elastic links and joints,high-speed parallel robots for pick-and-place operations inevitably suffer from residual vibrations that significantly degrade their positioning accuracy.An effective approach based on the input shaping technique is presented in this paper for suppressing the residual vibration in these parallel robots.After addressing the design principle of an input shaper for a parallel robot with flexible actuated joints,a robust optimal input shaper is developed by considering the configuration-dependent flexible modes and minimizing the maximum percentage of residual vibration at the end-effector.The input shaper allows a good overall performance to be achieved throughout the entire workspace.Experimental results on a 4-DOF SCARA-type parallel robot show that the residual vibration of the end-effector is dramatically reduced and the dynamic positioning accuracy of the robot significantly improved.
文摘A generalized scheme based on the sliding mode and component synthesis vibration suppression (CSVS) method has been proposed for the rotational maneuver and vibration suppression of an orbiting spacecraft with flexible appendages. The proposed control design process is twofold: design of the attitude controller followed by the design of a flexible vibration attenuator. The attitude controller using only the attitude and the rate information for the flexible spacecraft (FS) is designed to serve two purposes: it forces the attitude motion onto a pre-selected sliding surface and then guides it to the state space origin. The shaped command input controller based on the CSVS method is designed for the reduction of the flexible mode vibration, which only requires information about the natural frequency and damping of the closed system. This information is used to discretize the input so that minimum energy is injected via the controller to the flexible modes of the spacecraft. Additionally, to extend the CSVS method to the system with the on-off actuators, the pulse-width pulse-frequency (PWPF) modulation is introduced to control the thruster firing and integrated with the CSVS method. PWPF modulation is a control method that provides pseudo-linear operation for an on-off thruster. The proposed control strategy has been implemented on a FS, which is a hub with symmetric cantilever flexible beam appendages and can undergo a single axis rotation. The results have been proven the potential of this technique to control FS.
基金Supported by:National Natural Science Foundation of China under Grant Nos.52078387 and 51578425the Naturalof Zhejiang Province under Grant No.LY18E080027。
文摘A large model box was developed in our experiment to study the vibration reduction effect.Five hydraulic highperformance actuators are arranged in the upper part of the model box.There is a time difference between adjacent actuators,which can simulate the train induced vibration.To reduce vibration a composite barrier is designed;the barrier consists of a honeycomb concrete canvas and PE polymer water bags.The concrete canvas can be mixed with water to produce a hydration reaction to form a structure with a certain hardness.By simulating different train speeds and loads,vertical vibration velocity,and acceleration before and after the barrier are compared and analyzed.The experimental results show that the new barrier can achieve a good vibration reduction effect.When the simulated train speed increases,the damping effect of the barrier is improved.At a speed of 180 km/h,an amplitude of 1.5 m after the barrier is found to be 48.6%lower than that before the barrier.Velocity decreases by 24.2%at 36 km/h and by 38.1%at 108 km/h.
文摘Based on dynamical theories of water waves and dynamics of Mindlin thick plates, the investigation of the wave-induced responses and the vibration reduction of an elastic floating plate are presented using the Wiener-Hopf technique. Without regard to the case of elastic connector, the calculated results obtained by the present method are in good agreement with those from the literature and the experiment. It can be shown that the present method is valid. Relations between the spring stiffness to be used to connect the sea bottom and the floating plate and the parameters of wave-induced responses of floating plates are investigated using the present method. Therefore, these results can be used as theoretical bases for the design stage of super floating platform systems.
文摘The diagonal inerter is integrated into a suspension vibration reduction system(SVRS).The dynamic model of the SVRS with diagonal inerter and damping is established.The dynamic model is of strong geometric nonlinearity.The retaining nonlinearity up to cubic terms is validated under impact excitation.The conditions omitting the static deformation are determined.The effects of the diagonal inerter on the vibration reduction performance of the SVRS are explored under impact and random excitations.The vibration reduction performance of the proposed SVRS with both diagonal inerter and damping is better than that of either the SVRS without them or the SVRS with the diagonal damping only.
基金Cultivation Fund of the Key Grant Scientifi c and Technical Innovation Project, Ministry of Education of China Under Grant No.704003
文摘A novel distributed tuned liquid damper (DTLD) for reducing vibration in structures is proposed in this paper. The basic working principle of the DTLDs is to fill the empty space inside the pipes or boxes of cast-in-situ hollow reinforced concrete (RC) floor slabs with water or other liquid. The pipes or boxes then work as a series of small TLDs inside the structure, to increase the damping ratio of the entire structural system. Numerical simulation that accounts for the fluid- structure conpling effect is carried out to evaluate the vibration-reduction efficiency of the DTLDs. The results show that the DTLDs are able to considerably increase the damping of the structure and thus reduce its vibration. An additional benefit is that the DTLDs do not require architectural space to be added to the structure.
基金Funded by State Key Laboratory of Power Grid Environmental Protection(No.GYW51201801173)。
文摘The epoxy resin (E-51) was used as polymer matrix,conductive carbon black (CB) as conductive filler,and PZT was used to prepare a composite by curing.The effects of PZT and CB content on the properties of PZT/ CB/ EP piezoelectric composite were studied.When the PZT content reaches 40 wt%,the optimized vibration attenuation properties of PZT/CB/EP materials could be achieved with a loss factor of 0.9 from room temperature to 60 ℃.With the increase of PZT content,the bending strength of PZT/CB/EP piezoelectric composite vibration reduction material firstly increased from 45 MPa to 65 MPa and then decreased to 38 MPa.At room temperature,the dielectric constant increased from 7 to 50,and the dielectric loss increased from 0.1 to 0.5.
基金Supported by the National Basic Research Program of China(No.2012CB026000)the Beijing Education Commission Special Fund andDoctoral Degree Fund(No.20110010110009)
文摘The centrifugal air compressor outlet pipeline vibration was not decreased after barrel viscous dampers were installed in a petrochemical plant in Tianjin.A pipeline-damper experiment apparatus was built for studying the influence factors of the barrel viscous damper and pipe hoop in pipeline vibration reduction.The performance of the damper under different frequency and amplitude was researched respectively,the results showed that damping effect dependsed mainly on frequency and was not related to amplitude.Damper will fail when its vibration frequency exceeds its limit working frequency which was 40 Hz in test.The mechanical properties and energy dissipation were analyzed by using the Maxwell model,which explains experimental results well.According to damping effect and calculation of stiffness with ANSYS in different hoop width,hoop stiffness should match pipe stiffness and keep uniform along transfer path.Damping effect will get worse when local stiffness is too small or too large.Finally,the outlet pipeline vibration was decreased by 70%after using appropriate pipe hoop width and replacing the original damping liquid.
基金supported by the National Natural Science Foundation of China(grant number 31970454)the Aviation Science Foundation of China(2020Z0740R4001)+1 种基金the Graduate Innovation Fund of Jilin University(2022189)Undergraduate Innovation and Entrepreneurship Training Program Project of Jilin University(S202210183259).
文摘Using the method of structural finite element topology optimization and analysis of the hindwings of Trypoxylus dichotomus,this work identified the main loading force transmission path and designed the initial structure of a bionic flexible wing.A structural design scheme of the vibration damping unit was proposed,and the structural mechanics and modal vibration characteristics were simulated and analyzed.3D printing technology was used to manufacture the designed bionic wing skeleton,which was combined with two kinds of wing membrane materials.The Flapping Wing Micro-aerial Vehicle(FWMAV)transmission mechanism vibration characteristics were observed and analyzed by a high-speed digital camera.A triaxial force transducer was used to record the force vibration of the flexible bionic wing flapping in a wind tunnel.A wavelet processing method was used to process and analyze the force signal.The results showed that the force amplitude was more stable,the waveform roughness was the lowest,and the peak shaving phenomenon at the z-axis was the least obvious for the bionic flexible wing model that combined the topology-optimized bionic wing skeleton with a polyamide elastic membrane.This was determined to be the most suitable design scheme for the wings of FWMAVs.
基金supported by the National Natural Science Foundation of China (Grant No.52102442)the Fundamental Research Funds for the Central Universities (Grant Nos.2682022CX060 and 2682023GF002)。
文摘Levitation failure occasionally occurs when a maglev vehicle runs on a track. At the moment of levitation failure, the levitation module falls and hits the track, and there is a violent impact on the maglev vehicle-bridge coupled system. In this paper, the response of the maglev vehicle-bridge coupled system at the moment of and after levitation failure is analyzed, and three methods of reducing the vibration are proposed. First, a dynamics model of the maglev vehicle-bridge coupled system, which considers the control system, five flexible bridges, and track irregularity, is established, and the correctness of the model is verified using test data. The system response for different failure cases is then analyzed. Finally, the three methods of reducing vibration under levitation failure are proposed, and their effectiveness is evaluated. The results show that the failure position and speed barely affect the response, whereas the maximum impact forces due to levitation failure reduced by 13%, 63%, and 50% by adopting the three methods, namely connecting the first and third coils in series, coupling the ends of the levitation module vertically, and adopting two sets of anti-roll devices, respectively. When the latter two schemes are combined, the maximum impact force reduced from 133 kN(without vibration-reduction measures) to 9 kN, and the vibration-reduction measure is also effective for failures of the levitation units at the ends of the vehicle.
文摘The paper presents an analytical study of the helicopter rotor vibratory loadreduction design optimization with aeroelastic stability constraints. The composite rotor blade ismodeled by beam type finite elements, and warping deformation is taken into consideration for2-dimension analysis, while the one-dimension nonlinear differential equations of blade motion areformulated via Hamilton's principle. The rotor hub vibratory loads is chosen as the objectivefunction, while rotor blade section construction parameter, composite material ply structure andblade tip swept angle as the design variables, and au-torotation inertia, natural frequency andaeroelastic stability as the constraints. A 3-bladed rotor is designed, as an example, based on thevibratory hub load reduction optimization process with swept tip angle and composite material. Thecalculating results show a 24. 9 percent-33 percent reduction of 3/rev hub loads in comparison withthe base-line rotor.
基金The project is supported by National Natural Science Foundation of China and Nationalshipbuilding Corporation
文摘Experimental results of sound transmission loss in a range of frequency through bubbly curtains were obtained, where the air content was in a wide range by means of varying pressure differences and the diameters of the pores of bubble-produce apparatus . Vibration reduction of a vessel in water due to the bubbly curtain was found.
基金Project supported by the National Natural Science Foundation of China (Nos. 12172014 and11972050)the Key Laboratory of Vibration and Control of Aero-Propulsion System (Northeastern University),Ministry of Education of China (No. VCAME 202004)。
文摘To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper constructs pure nonlinear stiffness without neglecting the gravity effect of the oscillator. Both analytical and numerical methods are used to evaluate the performance of the NES-IA. The research findings indicate that even if the actual mass is 1% of the main oscillator, the NES-IA with proper inertia angles and mass distribution ratios can still effectively attenuate the steady-state and transient responses of the main oscillator. Nonlinear stiffness and damping also have important effects. Due to strongly nonlinear factors, the coupled system may exhibit higher branch responses under harmonic excitation. In shock excitation environment, the NES-IA with a large dynamic mass can trigger energy capture of both main resonance and high-frequency resonance. Furthermore, the comparison with the traditional NES also confirms the advantages of the NES-IA in overcoming mass dependence.
基金National Natural Science Foundation of China(U1904177)Key R&D Projects of the Ministry of Transport(2018-MS5-136)Henan Province Transportation Science and Technology Plan Project(2018J2,2019J-2-10).
文摘An isolation trench is a simple and effective method to isolate structural vibrations originating from sources of vibration other than earthquakes(machines,traffic,explosions,etc.);however,there is still not a conclusive depth of the isolation trench for frame structures.To investigate the isolation effect of a trench in the frame structure designed for ground vibration,both a field test and finite element analysis were conducted to analyze the reduced effect of the vibration.The vibration reduction analysis was based on the dynamic equation and wave theory.Considering the vibration control of an industrial plant frame,a soil-trench-building finite element model was built to analyze the vibration characteristics of the floor before and after the open isolation trench structure was used.According to the model,a dynamic test was carried out on the frame structure to assess the effect of the vibration reduction by introducing the trench.The results showed that the depth of the trench was the dominating factor in vibration isolation.When the depth of the trench reached 1~1.3 times the wavelength of the Rayleigh wave,the damping effect was the strongest.the width of the trench has little effect on the vibration isolation efficiency,and the trench must be maintained at a certain distance from the building to ensure the vibration damping efficiency.The vibration of each floor was obviously reduced after the trench was built.The vibration damping effect of the trench was significant.
文摘Vibratory driving is the most efficient method of sheet pile installation. The elimination or at least reduction of harmful consequences of sheet pile vibratory driving becomes an increasingly important and often the decisive factor in the selection of the excavation protection technology. In difficult soil conditions with strength soil parameters, pressure water jetting precedes sheet pile driving. This technique changes the soil properties, destroying its existing structure near the installed sheet pile. Unfortunately, the results and achievements of contractors using this technique are very often held confidential or simply remain in the records and it is difficult to find papers on this subject. This article features a detailed description of jet-assisted sheet pile driving, including a prefabrication description for the sheet pile toe used to jet water through, water pressure and quantity data and the results with regard to reduce vibrations and noise, as well as to the increase in sheet pile vibratory driving performance.
文摘To reduce the excessive vibration of a high-speed rotor system at the critical speed, a friction damper with a flexible support structure is introduced. The mechanism of vibration reduction and support characteristics are analyzed and a friction damper is designed. The effect on an unbalanced response is studied. Results show that the stiffness factor and the friction-damping factor of the damper are related to the cone angle and the friction factor of the inner-ring when adopting a proper structure. By changing these parameters and the Z-directional stiffness of the outer-ring, the stiffness and the damping characteristic of the damper can be varied. Introducing a friction damper into the support can reduce the stiffness and increase the damping of the support, thus decreasing the critical speed to avoid the operating speed, suppress the resonant response of a rotor system, and attenuate vibration forces to the outside.