A new ultra-low specific on-resistance （Ron,sp） vertical double diffusion metal-oxide-semiconductor field-effect tran- sistor （VDMOS） with continuous electron accumulation （CEA） layer, denoted as CEA-VDMOS, is p...A new ultra-low specific on-resistance （Ron,sp） vertical double diffusion metal-oxide-semiconductor field-effect tran- sistor （VDMOS） with continuous electron accumulation （CEA） layer, denoted as CEA-VDMOS, is proposed and its new current transport mechanism is investigated. It features a trench gate directly extended to the drain, which includes two PN junctions. In on-state, the electron accumulation layers are formed along the sides of the extended gate and introduce two continuous low-resistance current paths from the source to the drain in a cell pitch. This mechanism not only dramatically reduces the Ron,sp but also makes the Ron,sp almost independent of the n-pillar doping concentration （Am）. In off-state, the depletion between the n-pillar and p-pillar within the extended trench gate increases the Nn, and further reduces the Ron,sp. Especially, the two PNjunctions within the trench gate support a high gate--drain voltage in the off-state and on-state, re- spectively. However, the extended gate increases the gate capacitance and thus weakens the dynamic performance to some extent. Therefore, the CEA-VDMOS is more suitable for low and medium frequencies application. Simulation indicates that the CEA-VDMOS reduces the Ron,sp by 80% compared with the conventional super-junction VDMOS （CSJ-VDMOS） at the same high breakdown voltage （BV）.展开更多
P-InGaN/p-GaN superlattices （SLs） are developed for a hole accumulation layer （HAL） of a blue light emitting diode （LED）. Free hole concentration as high as 2.6× 1018 cm-3 is achieved by adjusting the Cp2Mg...P-InGaN/p-GaN superlattices （SLs） are developed for a hole accumulation layer （HAL） of a blue light emitting diode （LED）. Free hole concentration as high as 2.6× 1018 cm-3 is achieved by adjusting the Cp2Mg flow rate during the growth of p-InGaN/p-GaN SLs. The p-InGaN/p-GaN SLs with appropriate Cp2Mg flow rates are then incorporated between the multi-quantum well and A1GaN electron blocking layer as an HAL, which leads to the enhancement of light output power by 29% at 200 mA, compared with the traditional LED without such SL HAL. Meanwhile, the efficiency droop is also effectively alleviated in the LED with the SL HAL. The improved performance is attributed to the increased hole injection efficiency, and the reduced electron leakage by inserting the p-type SL HAL.展开更多
[Objective] This study aimed to investigation the effects of straw covering and different types of potassium fertilizer on salinity accumulation in surface layer of tobacco-planted paddy soil in southern China. [Metho...[Objective] This study aimed to investigation the effects of straw covering and different types of potassium fertilizer on salinity accumulation in surface layer of tobacco-planted paddy soil in southern China. [Method] Tobacco variety ‘Yunyan87’ was used as the experimental material to investigate the effects of salinity accumulation in surface layer of tobacco-planted paddy soil on the growth and development of flue-cured tobacco using different types of potassium fertilizer and mulching cultivation methods. [Result] The results showed that K＋ , Ca2＋ , SO42and NO3-were the major salt ions in topsoil at different growth stages of flue-cured tobacco, Na ＋ and Mg2＋ contents were also relatively high at vigorous growth stage, indicating that these salt ions were easily accumulated in surface layer of soil; to be specific, the absolute increase of salt ion concentration showed a decreasing order of K＋ SO42- NO3-Ca2＋ Mg2＋ Na＋ Cl-, while the relative increase of salt ion concentration showed a decreasing order of Ca2＋ K＋ Na＋ NO3-SO42-Mg2＋ Cl-. At 60 d posttransplanting, total salt content in topsoil reached the minimum of 359.1 mg/kg in Treatment 2, total salt content in topsoil reached the maximum of 536.1 mg/kg in Treatment 5 （CK）, which was significantly higher than that in other treatments. At 90 d post-transplanting, no significant difference was observed in total salt content among various treatments. At harvesting period, total salt content in topsoil reached the maximum of 3 278.4 mg/kg in Treatment 1, which was significantly higher than that in other treatments. Topsoil pH showed no significant differences among various treatments at three different periods, ranging from 5.39 to 5.59. Straw covering could effectively reduce salt content in topsoil, accelerate vigorous growth of tobacco, shorten vigorous growth period and increase plant height, leaf number and lead area; at vigorous growth stage, root vitality and root volume of tobacco were improved, but the yield and output value were relatively low. Major agronomic traits and yield of tobacco showed no significant difference among various treatments. Output value of tobacco reached the maximum of 24 196.8 yuan/hm2 in Treatment 3, which was significantly higher than that in other treatments. [Conclusion] Appropriate types and proportions of potassium fertilizer and straw covering can effectively reduce the total salt content in tobacco-planted paddy soil and increase the effective supply amount of K＋ , Ca2＋ , SO42-and NO3-, thereby promoting and improving the root vitality of tobacco, which is conducive to the growth and development of tobacco and will eventually enhance the yield, quality and economic benefits of flue-cured tobacco.展开更多
The North China Plain(NCP)is troubled by severe haze pollution and the evolution of haze pollution is closely related to the atmospheric boundary layer(ABL).However,experimental and theoretical studies on the physical...The North China Plain(NCP)is troubled by severe haze pollution and the evolution of haze pollution is closely related to the atmospheric boundary layer(ABL).However,experimental and theoretical studies on the physical-chemical processes of the ABL in the NCP are lacking,with many scientific problems to be addressed.To solve these problems,the Comprehensive Observation on the Atmospheric boundary layer Three-dimensional Structure(COATS)during haze pollution was carried out in the NCP from 2016 to 2020.The COATS experiment adopted a"point-line-surface"spatial layout,obtaining both spatial-temporal profiles of the meteorological and environmental elements in the ABL and the turbulent transport data of fine particulate matter(PM_(2.5))in winter and summer.The research achievements are as follows.The spatial-temporal distribution characteristics of the ABL structure and PM_(2.5)concentrations in NCP were determined.The typical thermal structure of persistent heavy haze events and the pollutant removal mechanism by low-level jets were revealed.It was determined that the spatial structure of the ABL adjusted by the Taihang Mountains is responsible for the heterogeneous distribution of haze pollution in the NCP,and that mountain-induced vertical circulations can promote the formation of elevated pollution layers.The restraints of the atmospheric internal boundaries on horizontal diffusion of pollutants were emphasized.The contribution of the ABL to haze pollution in winter and summer was qualitatively compared and quantitatively estimated.The turbulent transport nature behind the relationship between the atmospheric boundary layer height(ABLH)and surface PM_(2.5)concentrations was analyzed.The concept of"aerosol accumulation layer"was defined,and the applicability of the material method in determining ABLH was clarified.A measurement system for obtaining the turbulent flux of PM_(2.5)concentrations was developed,and the turbulence characteristics of PM_(2.5)concentrations were demonstrated.The COATS experiment is of great theoretical significance for thoroughly understanding the physical mechanisms of the ABL during haze pollution and filling the knowledge gap on the impacts of the ABL three-dimensional structure on haze pollution.The results of this study are conducive to the improvement and development of ABL parameterization schemes and serve as a scientific basis for formulating regional pollution prevention and control measures.展开更多
Rapid prototyping technology can greatly improve the actual processing industrial prototype; this paper introduces the main principle, characteristics and technology of rapid prototype manufacturing. The current rapid...Rapid prototyping technology can greatly improve the actual processing industrial prototype; this paper introduces the main principle, characteristics and technology of rapid prototype manufacturing. The current rapid prototype manufacturing products and production problems are analyzed. Because of the direct metal forming process have the characteristic of point by point, surfacing with stack molding manufacturing layer by layer, so it is suitable for complex shape parts two-dimensional or three-dimensional functionally gradient materials manufacturing.展开更多
Atmospheric boundary layer height(ABLH)is an important parameter used to depict characteristics of the planetary boundary layer(PBL)in the lower troposphere.The ABLH is strongly associated with the vertical distributi...Atmospheric boundary layer height(ABLH)is an important parameter used to depict characteristics of the planetary boundary layer(PBL)in the lower troposphere.The ABLH is strongly associated with the vertical distributions of heat,mass,and energy in the PBL,and it is a key quantity in numerical simulation of the PBL and plays an essential role in atmospheric environmental assessment.In this paper,various definitions and methods for deriving and estimating the ABLH are summarized,from the perspectives of turbulent motion,PBL dynamics and thermodynamics,and distributions of various substances in the PBL.Different methods for determining the ABLH by means of direct observation and remote sensing retrieval are reviewed,and comparisons of the advantages and disadvantages of these methods are presented.The paper also summarizes the ABLH parameterization schemes,discusses current problems in the estimation of ABLH,and finally points out the directions for possible future breakthroughs in the ABLHrelated research and application.展开更多
Experiments with the limited space-charge accumulation（LSA） mode of oscillation in a large gap semiinsulating （SI） GaAs photoconductive semiconductor switch（PCSS） are discussed.It has been observed that growth a...Experiments with the limited space-charge accumulation（LSA） mode of oscillation in a large gap semiinsulating （SI） GaAs photoconductive semiconductor switch（PCSS） are discussed.It has been observed that growth and drift of a photo-activated charge domain（PACD） are quenched only when the bias voltage is more than twice the threshold voltage.The original negative resistance characteristics are directly utilized in the LSA mode;during LSA operation the spatial average of the electric field varies over a large portion of the negative differential mobility region of the velocity-electric field characteristic.The work efficiency of an SI GaAs PCSS is remarkably enhanced by electric field excursions into the positive resistance region when the total electric field is only below the threshold part of the time.The LSA mode can only operate in the certain conditions that satisfy the quenching of the accumulation layer and the smaller initial domain voltage.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.61176069 and 61376079)the Fundamental Research Funds for the Central Universities,China(Grant No.ZYGX2014Z006)
文摘A new ultra-low specific on-resistance （Ron,sp） vertical double diffusion metal-oxide-semiconductor field-effect tran- sistor （VDMOS） with continuous electron accumulation （CEA） layer, denoted as CEA-VDMOS, is proposed and its new current transport mechanism is investigated. It features a trench gate directly extended to the drain, which includes two PN junctions. In on-state, the electron accumulation layers are formed along the sides of the extended gate and introduce two continuous low-resistance current paths from the source to the drain in a cell pitch. This mechanism not only dramatically reduces the Ron,sp but also makes the Ron,sp almost independent of the n-pillar doping concentration （Am）. In off-state, the depletion between the n-pillar and p-pillar within the extended trench gate increases the Nn, and further reduces the Ron,sp. Especially, the two PNjunctions within the trench gate support a high gate--drain voltage in the off-state and on-state, re- spectively. However, the extended gate increases the gate capacitance and thus weakens the dynamic performance to some extent. Therefore, the CEA-VDMOS is more suitable for low and medium frequencies application. Simulation indicates that the CEA-VDMOS reduces the Ron,sp by 80% compared with the conventional super-junction VDMOS （CSJ-VDMOS） at the same high breakdown voltage （BV）.
文摘P-InGaN/p-GaN superlattices （SLs） are developed for a hole accumulation layer （HAL） of a blue light emitting diode （LED）. Free hole concentration as high as 2.6× 1018 cm-3 is achieved by adjusting the Cp2Mg flow rate during the growth of p-InGaN/p-GaN SLs. The p-InGaN/p-GaN SLs with appropriate Cp2Mg flow rates are then incorporated between the multi-quantum well and A1GaN electron blocking layer as an HAL, which leads to the enhancement of light output power by 29% at 200 mA, compared with the traditional LED without such SL HAL. Meanwhile, the efficiency droop is also effectively alleviated in the LED with the SL HAL. The improved performance is attributed to the increased hole injection efficiency, and the reduced electron leakage by inserting the p-type SL HAL.
基金Supported by Project of Guangdong Zhongyan Industry Limited Liability Company[YYG15JO-QK(2011)-004]~~
文摘[Objective] This study aimed to investigation the effects of straw covering and different types of potassium fertilizer on salinity accumulation in surface layer of tobacco-planted paddy soil in southern China. [Method] Tobacco variety ‘Yunyan87’ was used as the experimental material to investigate the effects of salinity accumulation in surface layer of tobacco-planted paddy soil on the growth and development of flue-cured tobacco using different types of potassium fertilizer and mulching cultivation methods. [Result] The results showed that K＋ , Ca2＋ , SO42and NO3-were the major salt ions in topsoil at different growth stages of flue-cured tobacco, Na ＋ and Mg2＋ contents were also relatively high at vigorous growth stage, indicating that these salt ions were easily accumulated in surface layer of soil; to be specific, the absolute increase of salt ion concentration showed a decreasing order of K＋ SO42- NO3-Ca2＋ Mg2＋ Na＋ Cl-, while the relative increase of salt ion concentration showed a decreasing order of Ca2＋ K＋ Na＋ NO3-SO42-Mg2＋ Cl-. At 60 d posttransplanting, total salt content in topsoil reached the minimum of 359.1 mg/kg in Treatment 2, total salt content in topsoil reached the maximum of 536.1 mg/kg in Treatment 5 （CK）, which was significantly higher than that in other treatments. At 90 d post-transplanting, no significant difference was observed in total salt content among various treatments. At harvesting period, total salt content in topsoil reached the maximum of 3 278.4 mg/kg in Treatment 1, which was significantly higher than that in other treatments. Topsoil pH showed no significant differences among various treatments at three different periods, ranging from 5.39 to 5.59. Straw covering could effectively reduce salt content in topsoil, accelerate vigorous growth of tobacco, shorten vigorous growth period and increase plant height, leaf number and lead area; at vigorous growth stage, root vitality and root volume of tobacco were improved, but the yield and output value were relatively low. Major agronomic traits and yield of tobacco showed no significant difference among various treatments. Output value of tobacco reached the maximum of 24 196.8 yuan/hm2 in Treatment 3, which was significantly higher than that in other treatments. [Conclusion] Appropriate types and proportions of potassium fertilizer and straw covering can effectively reduce the total salt content in tobacco-planted paddy soil and increase the effective supply amount of K＋ , Ca2＋ , SO42-and NO3-, thereby promoting and improving the root vitality of tobacco, which is conducive to the growth and development of tobacco and will eventually enhance the yield, quality and economic benefits of flue-cured tobacco.
基金supported by the National Natural Science Foundation of China(Grant Nos.42090031,42175092,92044301&91544216)the National Key R&D Program of China(Grant Nos.2016YFC0203306&2017YFC0209600)the National Research Program for Key Issues in Air Pollution Control(Grant Nos.DQGG0104&DQGG0106)。
文摘The North China Plain(NCP)is troubled by severe haze pollution and the evolution of haze pollution is closely related to the atmospheric boundary layer(ABL).However,experimental and theoretical studies on the physical-chemical processes of the ABL in the NCP are lacking,with many scientific problems to be addressed.To solve these problems,the Comprehensive Observation on the Atmospheric boundary layer Three-dimensional Structure(COATS)during haze pollution was carried out in the NCP from 2016 to 2020.The COATS experiment adopted a"point-line-surface"spatial layout,obtaining both spatial-temporal profiles of the meteorological and environmental elements in the ABL and the turbulent transport data of fine particulate matter(PM_(2.5))in winter and summer.The research achievements are as follows.The spatial-temporal distribution characteristics of the ABL structure and PM_(2.5)concentrations in NCP were determined.The typical thermal structure of persistent heavy haze events and the pollutant removal mechanism by low-level jets were revealed.It was determined that the spatial structure of the ABL adjusted by the Taihang Mountains is responsible for the heterogeneous distribution of haze pollution in the NCP,and that mountain-induced vertical circulations can promote the formation of elevated pollution layers.The restraints of the atmospheric internal boundaries on horizontal diffusion of pollutants were emphasized.The contribution of the ABL to haze pollution in winter and summer was qualitatively compared and quantitatively estimated.The turbulent transport nature behind the relationship between the atmospheric boundary layer height(ABLH)and surface PM_(2.5)concentrations was analyzed.The concept of"aerosol accumulation layer"was defined,and the applicability of the material method in determining ABLH was clarified.A measurement system for obtaining the turbulent flux of PM_(2.5)concentrations was developed,and the turbulence characteristics of PM_(2.5)concentrations were demonstrated.The COATS experiment is of great theoretical significance for thoroughly understanding the physical mechanisms of the ABL during haze pollution and filling the knowledge gap on the impacts of the ABL three-dimensional structure on haze pollution.The results of this study are conducive to the improvement and development of ABL parameterization schemes and serve as a scientific basis for formulating regional pollution prevention and control measures.
文摘Rapid prototyping technology can greatly improve the actual processing industrial prototype; this paper introduces the main principle, characteristics and technology of rapid prototype manufacturing. The current rapid prototype manufacturing products and production problems are analyzed. Because of the direct metal forming process have the characteristic of point by point, surfacing with stack molding manufacturing layer by layer, so it is suitable for complex shape parts two-dimensional or three-dimensional functionally gradient materials manufacturing.
基金Supported by the National Key Research and Development Program of China(2016YFC0203300 and 2017YFC0209600)National Research Program for Key Issues in Air Pollution Control(DQGG0104 and DQGG0106)National Natural Science Foundation of China(91544216).
文摘Atmospheric boundary layer height(ABLH)is an important parameter used to depict characteristics of the planetary boundary layer(PBL)in the lower troposphere.The ABLH is strongly associated with the vertical distributions of heat,mass,and energy in the PBL,and it is a key quantity in numerical simulation of the PBL and plays an essential role in atmospheric environmental assessment.In this paper,various definitions and methods for deriving and estimating the ABLH are summarized,from the perspectives of turbulent motion,PBL dynamics and thermodynamics,and distributions of various substances in the PBL.Different methods for determining the ABLH by means of direct observation and remote sensing retrieval are reviewed,and comparisons of the advantages and disadvantages of these methods are presented.The paper also summarizes the ABLH parameterization schemes,discusses current problems in the estimation of ABLH,and finally points out the directions for possible future breakthroughs in the ABLHrelated research and application.
基金Project supported by the National Natural Science Foundation of China(Nos.50837005,11204264)the Research Fund for Doctors of Xinjiang Normal University(No.XJNUBS 1220)the Research Fund for the Outstanding Young Teacher of Xinjiang Normal University (No.XJNU1214)
文摘Experiments with the limited space-charge accumulation（LSA） mode of oscillation in a large gap semiinsulating （SI） GaAs photoconductive semiconductor switch（PCSS） are discussed.It has been observed that growth and drift of a photo-activated charge domain（PACD） are quenched only when the bias voltage is more than twice the threshold voltage.The original negative resistance characteristics are directly utilized in the LSA mode;during LSA operation the spatial average of the electric field varies over a large portion of the negative differential mobility region of the velocity-electric field characteristic.The work efficiency of an SI GaAs PCSS is remarkably enhanced by electric field excursions into the positive resistance region when the total electric field is only below the threshold part of the time.The LSA mode can only operate in the certain conditions that satisfy the quenching of the accumulation layer and the smaller initial domain voltage.
