A cost-effective, high-performance and highly stable membrane has always been in intensively needed in aqueous organic-based flow batteries. Here we present a porous polybenzimidazole(PBI) membrane with positive charg...A cost-effective, high-performance and highly stable membrane has always been in intensively needed in aqueous organic-based flow batteries. Here we present a porous polybenzimidazole(PBI) membrane with positive charges that endow the membrane with a high rejection and an excellent anti-fouling ability for target organic molecule and asymmetric structure that affords a high conductivity for vanadiummethylene blue flow battery(V-MB FB). The morphologies and thickness of separating layer in particular of the porous PBI can be well adjusted by simply altering the polymer concentration in the cast solution and further afford the membrane with a controllable property in terms of both ion selectivity and ion conductivity. As a result, a V-MB FB assembled with a porous PBI membrane delivers a coulombic efficiency(CE) of 99.45% and an energy efficiency(EE) of 86.10% at a current density of 40 mA cm^(-2), which is 12% higher than that afforded by a Nafion 212 membrane. Most importantly, the V-MB FB demonstrates a methylene blue(MB) utilization of 97.55% at a theoretical capacity of 32.16 Ah L^(-1)(based on the concentration of MB in the electrolyte) because of the high ion conductivity of the membrane, which favors reducing the cost of a battery. The results suggest that the designed porous PBI membranes exhibit a very promising prospect for methylene blue-vanadium flow battery.展开更多
The magnetically responsive anti-fouling nanofiber membrane(MRANM)was fabricated for efficient oilwater emulsion separation,which could be cleaned using oscillating magnetic field.MRANM was prepared by grafting superp...The magnetically responsive anti-fouling nanofiber membrane(MRANM)was fabricated for efficient oilwater emulsion separation,which could be cleaned using oscillating magnetic field.MRANM was prepared by grafting superparamagnetic Fe_(3)O_(4) nanoparticles onto the surface of electrospun polyacrylonitrile nanofiber membrane(PANM).Compared with PANM,the water contact angle of MRANM decreased from 104°to 0°,indicating that the hydrophilicity of the membrane was significantly improved.For the emulsions of hexadecane,octane and rapeseed oil,the separation efficiency was 98.04%,96.59%and 92.67%,respectively.After the treatments in oscillating magnetic field,the separation efficiency kept above 95%after 8 times recycling,which indicated that the MRANM had good regenerability and reusability.The as-fabricated membrane with magnetic responsiveness facilitated an effective method for solving the membrane fouling problem during practical applications of separation high viscosity oil-water emulsion.展开更多
The harsh working environment affects the performance and usage life of Al and its alloys,thus limiting their application.In recent years,Slippery Liquid-infused Porous Surface(SLIPS)has attracted much attention due t...The harsh working environment affects the performance and usage life of Al and its alloys,thus limiting their application.In recent years,Slippery Liquid-infused Porous Surface(SLIPS)has attracted much attention due to excellent anti-corrosion,anti-fouling and anti-icing properties.This may be an effective way to improve the properties of Al and its alloys.Here,the SLIPS with petal-like structure was constructed on the Al alloy via simple hydrothermal reaction,Stearic Acid(STA)modification and lubricant injection.A variety of droplets(including oil-in-water emulsions)can slide on the SLIPS at a low angle,even the Sliding Angle(SA)of the water droplet is only 3°.Furthermore,the SLIPS exhibits outstanding mechanical and chemical properties.It can maintain fine oil-locking ability under high shearing force and keep slippery stability after immersion in acid/alkaline solutions.In addition,the SLIPS possesses excellent anti-corrosion,anti-fouling and anti-icing properties,which provides a new way to promote the application of Al and its alloys.Therefore,the SLIPS is expected to be an effective way to improve the properties of Al and its alloys,as well as play a role in anti-fouling and self-cleaning in construction,shipbuilding and automotive manufacturing industries,thereby expanding the practical application of Al and its alloys.展开更多
The clearwater obtained from stabilized oily wastewater has become a worldwide challenge.Nowdays,the area of oil/water emulsion separation materials have accomplished great progress,but still faces the enormous proble...The clearwater obtained from stabilized oily wastewater has become a worldwide challenge.Nowdays,the area of oil/water emulsion separation materials have accomplished great progress,but still faces the enormous problems of low flux,poor stability,and pollution resistance.Nanocelluloses(cellulose nanocrystals(CNC))with the advantages of hydrophilicity,ecofriendliness,and regeneration are ideal materials for the construction of separation membranes.In this paper,a flexible,antifouling,and durable nanocellulose-based membrane functionalized by block copolymer(poly(N-isopropylacrylamide)-b-poly(N,Ndimethylaminoethyl methacrylate))is prepared via chemical modification and self-assembly,showing high separation efficiency(above 99.6%)for stabilized oil-in-water emulsions,excellent anti-fouling and cycling stability,high-temperature resistance,and acid and alkali resistance.More importantly,the composite membrane has ultra-high flux in separating oil-in-water emulsions(29,003 L·m^(−2)·h^(−1)·bar^(−1))and oil/water mixture(51,444 L·m^(−2)·h^(−1)·bar^(−1)),which ensures high separation efficiency.With its durability,easy scale-up,and green regeneration,we envision this biomass-derived membrane will be an alternative to the existing commercial filter membrane in environmental remediation.展开更多
A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ethe...A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment.展开更多
Zwitterions have aroused much interest to endow implantable medical devices with anti-fouling and anti-thrombosis performance,due to their ability to form a hydrated layer that can provide a good barrier against prote...Zwitterions have aroused much interest to endow implantable medical devices with anti-fouling and anti-thrombosis performance,due to their ability to form a hydrated layer that can provide a good barrier against protein and cell adhesion. Herein,tyramine modified sulfobetaine-derived sodium hyaluronan(HST) hydrogel coating was fabricated, in which hyaluronan(HA)was used as polysaccharide skeleton to graft zwitterionic sulfobetaine, and tyramine was introduced as crosslinker to construct both the network of hydrogel and a strong covalent bond between coating and substrate. Hydrogel coating was prepared by spin coating or painting HST prepolymer solution under ultraviolet light irradiation. The obtained HST hydrogel coating shows good stability. Moreover, in addition to its outstanding anti-fouling performance and good biocompatibility, it can effectively prevent thrombosis in blood circulation ex vivo. This work offers a universal strategy to prepare a high-performance anti-fouling and antithrombosis coating, which is expected to promote the development of functional coatings for biomedical materials.展开更多
Direct deployment of gluing and achieving durable robust adhesion in water is challenging due to difficulty in repelling interface water.This work reports a novel hyperbranched polymer-based water-resistant adhesive(H...Direct deployment of gluing and achieving durable robust adhesion in water is challenging due to difficulty in repelling interface water.This work reports a novel hyperbranched polymer-based water-resistant adhesive(HBPBA)based on Michael addition reaction of multi-vinyl monomers with dopamine and 3-aminophenylboronic acid.Upon encountering water,the HBPBA forms coacervates whose hydrophobic chains aggregate to displace interface water,and meanwhile the catechols exposing outwards contribute to underwater adhesion.The HBPBA can strongly glue diverse substrates including PTFE,PE,PET,ceramic,Ti and stainless steel.The HBPBA can maintain stable adhesion in different environments,such as tap water,simulated sea water,PBS,and a wide range of pH solutions(pH 2 to 10)for 3 months,supposedly due to the complexation of catechol with boronic acid.Intriguingly,HBPBA film can be bonded to the titanium surface as a primer,which firmly anchors the antifouling PNAGAPCBAA hydrogel coating through copolymerization of remaining double bonds in HBPBA and NAGA plus CBAA.The PNAGA-PCBAA hydrogel-modified titanium is biocompatible and shows outstanding antifouling ability both in vitro and in vivo.This work proposes a new strategy for creating underwater deployable and water-resistant adhesives that may find promising applications in engineering and biomedical fields.展开更多
Antifouling ability and blood compatibility are critically important in the development of medical metallic implants for clinical applications.Here,we report the zwitterionic-phosphonate block polymer as a new type of...Antifouling ability and blood compatibility are critically important in the development of medical metallic implants for clinical applications.Here,we report the zwitterionic-phosphonate block polymer as a new type of high-efficiency antifouling coating for metallic substrates.Six block polymers(pSBMA-b-pDEMMP)with different segment lengths(nSBMA:nDEMMP=10:25,40:25,100:25,75:5,75:40,75:100)were prepared and anchored on titanium alloy(TC4)substrates.1H nuclear magnetic resonance(NMR)results clearly showed the precise preparation of the block polymers.XPS analysis and water contact angle measurement indicated the successful construction of the block polymer on TC4 substrates.The relationship between the antifouling performance of the polymer coating and the length of pDEMMP and pSBMA segments in the block polymer was established.Results showed that the polymer containing the pSBMA segment above 40 repeat units could significantly inhibit protein adsorption,platelet adhesion,bacterial adhesion and cell adhesion,while the pDEMMP segment above 5 repeat units is able to generate stable zwitterionic polymer coating on TC4 substrates.This ease of production and high-efficiency antifouling modification strategy elucidated here may find broad application for biomedical implants and devices in clinical applications.展开更多
In order to solve the problem of fouling of submerged optical instruments,an air-blast cleaning mechanism was integrated into an optical sensor used for measuring suspended sediment concentration(SSC)in natural waters...In order to solve the problem of fouling of submerged optical instruments,an air-blast cleaning mechanism was integrated into an optical sensor used for measuring suspended sediment concentration(SSC)in natural waters.Laboratory experiments in a manually created fouling environment were conducted to observe the fouling process on sensor cases made of different materials,and to verify the effectiveness of air-blast cleaning in reducing fouling.Results indicated that sensors with an aluminum case experienced more serious bio-fouling than that with polyethylene case,and the air-blast cleaning mechanism was capable of reducing fouling effect on sensor signals.So the submerged optical instruments should avoid using metal materials.The duration and frequency of air-blast cleaning can be determined and adjusted depending on actual field conditions.展开更多
Herein,copper ion doped calcium alginate(Cu^(2+)/CaAlg)composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate(NaAlg)as raw material.The thermal stability and structure of the co...Herein,copper ion doped calcium alginate(Cu^(2+)/CaAlg)composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate(NaAlg)as raw material.The thermal stability and structure of the composite membranes were characterized by thermogravimetric analysis and infrared spectroscopy.The mechanical strength,anti-fouling performance,hydrophilicity and filtration performance of the membrane were studied.The results show that Cu^(2+)/CaAlg hydrogel membrane has excelle nt mechanical properties and thermal stability.The anti-swelling ability of the membrane was greatly enhanced by doping Cu^(2+).After three alternate filtration cycles,the flux recovery rate of Cu^(2+)/CaAlg hydrogel membrane can still reach 85%,indicating that the membrane has good antipollution performance.When the operation pressure was 0.1 MPa,the rejection of coomassie brilliant blue G250 reached 99.8%with a flux of 46.3 L m^(-2)h^(-1),while the Na_(2)SO_(4) rejection was less than 10.0%.The Cu^(2+)/CaAlg membrane was recycled after 24 h in the filtration process,and its flux and rejection rate did not decrease significantly,indicating that the hydrogel membrane has long-term application potential.The Cu^(2+)/CaAlg membrane has a wide range of applications prospect in dye desalination,fine separation and biopharmaceutical technology fields.展开更多
The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups ...The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups was achieved by atom transfer radical polymerization(ATRP).The amphiphilic copolymers were characterized by ~1H-NMR, Fourier transform infrared(FTIR) spectroscopy and gel permeation chromatography(GPC).From thermogravimetric analysis (TGA),the decomposition temperature of SHMI-g-PEGMA is low...展开更多
Enormous demands on the separation of oil/water(O/W)emulsions in various industries,such as petrochemical,food and pharmaceutical industries,are looking for high performance and energy-efficient separation methods.Cer...Enormous demands on the separation of oil/water(O/W)emulsions in various industries,such as petrochemical,food and pharmaceutical industries,are looking for high performance and energy-efficient separation methods.Ceramic membranes have been used to deal with O/W emulsions,for its outstanding characteristics of easy-operation,high-flux,and long-term stability.However,membrane fouling is still a challenge in the industrial application of ceramic membranes.Herein,antifouling ceramic membranes were fabricated by grafting zwitterions on the membrane surface via an environment-friendly two-step grafting method,which improves the antifouling property and permeability.Successful grafting of such zwitterion on the ceramic surface was assessed by the combination of FTIR and XPS characterization.More importantly,the hydration can be formed by electrostatic interactions layer on the modified membrane,which was confirmed by TGA characterization.The antifouling performance of prepared zwitterionic ceramic membranes in the separation of O/W emulsions was systematically tested.The results suggested that zwitterion can significantly improve the flux of ceramic ultrafiltration membrane,and can also improve antifouling property dramatically by reducing the irreversible fouling in the separation of O/W emulsions.Therefore,zwitterionic ceramic membranes hold promising potentials as an antifouling,highly efficient and green method in the practical purification of the O/W emulsions.展开更多
Designing and fabricating the marine anti-corrosion materials without fluorine by superhydrophobic method is a huge challenge. In this study, an environmentally friendly composite coating was prepared by combing modif...Designing and fabricating the marine anti-corrosion materials without fluorine by superhydrophobic method is a huge challenge. In this study, an environmentally friendly composite coating was prepared by combing modified expanded graphite(EAG) with nano zinc oxide(ZnO). This coating showed superhydrophobic surface and good corrosion resistance. Fourier transform infrared spectroscopy(FITR), X-ray diffraction(XRD),and scanning electron microscopy(SEM) were used to characterize the materials in fabricating process of the coating. The properties of three composite coatings(ZnO,EAG, and EAG@ZnO) were analyzed, including surface roughness, water contact angle, corrosion resistance, selfcleaning and anti-fouling. The combination of ZnO and EAG caused a big water contact angle, leading superhydrophobic surface of the composite coatings. The electrochemical results showed that the superhydrophobic EAG@ZnO coating had a larger capacitive arc diameter and charge transfer resistance, indicating the enhanced anti-corrosion resistance. Meanwhile, the EAG@ZnO coating also showed good self-cleaning and anti-fouling performance according to solid and liquid pollutants tests.In addition, the mechanical properties and stability of the superhydrophobic EAG@ZnO coatings were evaluated by knife peeling and finger scratch tests. In summary, these superhydrophobic and anti-fouling EAG@ZnO composite coatings provide a potential application in marine corrosion and protection field.展开更多
In this paper,graphene oxide quantum dots with amino groups(NH_(2)-GOQDs)were tailored to the surface of a thin-film composite(TFC)membrane surface for optimizing forward osmosis(FO)membrane performance using the amid...In this paper,graphene oxide quantum dots with amino groups(NH_(2)-GOQDs)were tailored to the surface of a thin-film composite(TFC)membrane surface for optimizing forward osmosis(FO)membrane performance using the amide coupling reaction.The results jointly demonstrated hydrophilicity and surface roughness of the membrane enhanced after grafting NH_(2)-GOQDs,leading to the optimized affinity and the contact area between the membrane and water molecules.Therefore,grafting of the membrane with a concentration of 100 ppm(TFC-100)exhibited excellent permeability performance(58.32 L·m^(–2)·h^(–1))compared with TFC membrane(16.94 L·m^(–2)·h^(–1)).In the evaluation of static antibacterial properties of membranes,TFC-100 membrane destroyed the cell morphology of Escherichia coli(E.coli)and reduced the degree of bacterial adsorption.In the dynamic biofouling experiment,TFC-100 membrane showed a lower flux decline than TFC membrane.After the physical cleaning,the flux of TFC-100 membrane could recover to 96%of the initial flux,which was notably better than that of TFC membrane(63%).Additionally,the extended Derjaguin–Landau–Verwey–Overbeek analysis of the affinity between pollutants and membrane surface verified that NH_(2)-GOQDs alleviates E.coli contamination of membrane.This work highlights the potential applications of NH_(2)-GOQDs for optimizing permeability and biofouling mitigation of FO membranes.展开更多
In membrane distillation(MD),complicated feed water with amphiphilic contaminants induces fouling/wetting of the MD membrane and can even lead to process failure.This study reports a facile approach to fabricate robus...In membrane distillation(MD),complicated feed water with amphiphilic contaminants induces fouling/wetting of the MD membrane and can even lead to process failure.This study reports a facile approach to fabricate robust and self-healing hybrid amphiphobic membranes for anti-surfactant-wetting MD based on the ultra-low surface energy of fluorinated polyhedral oligomeric silsesquioxanes(F-POSS)and its thermal induced motivation and rotation.The thermal treatment makes the membranes achieving amphiphobicity at a very low cost of F-POSS(13.04 wt.%),which is about 1/3 of without thermal treatment.The prepared membrane exhibits excellent amphiphobicity,i.e.ethanol contact angle of 120.3°,without using environmentally toxic fluorinated nanoparticles.Robust MD performance was observed for the amphiphobic membrane in concentrated sodium dodecyl sulfate(SDS)feed solutions.Furthermore,the fabricated membrane exhibited stable amphiphobicity even in extreme environments,including strong acid or alkaline solutions.In the event of a damaged or abraded membrane surface where the F-POSS can be removed,the amphiphobic membrane exhibits self-healing ability with additional thermal treatment.This simple approach without the use of nanoparticles provides an environmentally friendly way for fabrication of amphiphobic membranes for anti-surfactant-wetting membrane distillation.展开更多
In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion oc...In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion occurred when Zn^(2+)and Cl-ions gradually diffused into water, creating a well-connected ion channel network and the SF-g-PAN filtration membrane was obtained. The membranes were observed by SEM and 3D ultra-depth microscope. The hydrophilic property, pore size distribution and dye rejection of the membrane were investigated. Results showed that the membrane has no finger hole formation because ZnCl_2 aqueous solution has a lower curing rate parameter compared with organic solvents. SF-gPAN membrane possessed good anti-fouling properties and pH sensitivity. The pore size distribution of the SF-g-PAN membrane was 0.25–1.04 nm. The rejection of direct yellow 27(Mw = 662.6) and amaranth(Mw = 604.5) was 96.51% and 30.63%, with the flux of 72.32 L m^(-2) h^(-1) and 73.83 L m^(-2) h^(-1) respectively at0.1 MPa. The SF-g-PAN membrane has a wide range of applications prospect in fine separation, dye desalination, waste water treatment and biomedical fields.展开更多
The advancement in material science and engineering technology has led to the development of antifouling(AF) coatings which are cheaper, durable, less toxic, and safe to the environment. The use of AF coatings contain...The advancement in material science and engineering technology has led to the development of antifouling(AF) coatings which are cheaper, durable, less toxic, and safe to the environment. The use of AF coatings containing tributyltin compounds was prohibited at the beginning of 2003, this necessitated the development of environmentally friendly coatings. The fouling release coating(FRC) lacks biocides and has low surface energy, low elastic modulus with smooth surface properties, hence a better release effect to fouling organisms. Several functional coatings have been recently developed based on fouling release(FR) technology to combat the effects of biofouling. Here, we provide a brief overview of innovative technologies and recent developments based on FRCs, including silicone, modified fluorinated polymer,cross-linked coatings, amphiphilic copolymer coating, hydrogel coatings, and biomimetic coatings. We also highlight the key issues and shortcomings of innovative technologies based on FRCs. This may give new insights into the future development of marine AF coatings.展开更多
Transcatheter aortic heart valves(TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study,...Transcatheter aortic heart valves(TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study, composites of poly(ethylene glycol) diacrylate(PEGDA) hydrogels and anisotropic highshrinkage polyethylene terephthalate/polyamide6(PET-PA6) fabric(PEGDA/PET-PA6) were fabricated as artificial heart valve leaflets. Dynamic mechanical analyses(DMA) indicated that PEGDA/PET-PA6 composites possessed anisotropic mechanical properties(i.e., storage moduli ~23.30 ± 1.36 MPa parallel to the aligned fabric fibers and ~9.68 ± 0.90 MPa perpendicular to the aligned fibers at 1 Hz) that were comparable to aortic valve leaflets. The PEGDA/PET-PA6 composites with smooth surfaces were highly hydrophilic(contact angle ~41.6°± 3.8°) and had low-fouling properties without platelet adhesion,suggesting a low risk of thrombogenicity when they interacted with blood. Furthermore, transcatheter aortic heart valves were fabricated using nitinol self-expanding frames and PEGDA/PET-PA6 composites as artificial leaflets, which presented excellent hemodynamic performance with a large orifice area(1.75cm2) and low regurgitation(3.41%), thus meeting the requirements of ISO 5840-3 standard. Therefore,PEGDA/PET-PA6 composites had suitable mechanical properties, good biocompatibility, and low-fouling properties, indicating that they might be used for TAHVs in the future.展开更多
Development of porous materials with anti-fouling and remote controllability is highly desired for oil-water separation application yet still challenging. Herein, to address this challenge, a sponge with unusual super...Development of porous materials with anti-fouling and remote controllability is highly desired for oil-water separation application yet still challenging. Herein, to address this challenge, a sponge with unusual superhydrophilicity/superoleophobicity and magnetic property was fabricated through a dip-coating process. To exploit its superhydrophilic/superoleophobic property, the obtained sponge was used as a reusable water sorbent scaffold to collect water from bulk oils without absorbing any oil. Owing to its magnetic property, the sponge was manipulated remotely by a magnet without touching it directly during the whole water collection process, which could potentially lower the cost of the water collection process. Apart from acting as a water-absorbing material, the sponge can also be used as affiliation material to separate water from oil-water mixture and oil in water emulsion selectively, when fixed into a cone funnel. This research provides a key addition to the field of oil-water separation materials.展开更多
In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic...In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic silica (SiO2) nanoparticles onto the surface to improve anti-fouling performance. A range of testing techniques including attenuated total reflection Flourier transformed infrared spectroscopy(ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), water contact angle, mechanical test,filtration and anti-fouling performance were carried out to discuss the influence of different modification conditions on the properties of the membranes. The prepared hollow fiber membranes display the significantly excellent performance when the vinyl trimethoxy silane (VTMS) concentration was 13%, the pH value of the hydrolyzate was 4 and the hydrolysis reaction time was 6 h. In particular, the hydrophilicity of modified membranes was improved effectively, resulting in the enhancement of membrane anti-fouling properties. The results of this work can be consulted for improving the anti-fouling performance of the UHMWPE microfiltration hollow fiber membrane applied in the field of water purification.展开更多
基金financial support from NSFC (22075121)the Youth Innovation Promotion Association CAS (2019182)+1 种基金the Dalian Science and Technology Innovation Project (2020JJ26GX031)the DNL Cooperation Found,CAS(DNL201910)。
文摘A cost-effective, high-performance and highly stable membrane has always been in intensively needed in aqueous organic-based flow batteries. Here we present a porous polybenzimidazole(PBI) membrane with positive charges that endow the membrane with a high rejection and an excellent anti-fouling ability for target organic molecule and asymmetric structure that affords a high conductivity for vanadiummethylene blue flow battery(V-MB FB). The morphologies and thickness of separating layer in particular of the porous PBI can be well adjusted by simply altering the polymer concentration in the cast solution and further afford the membrane with a controllable property in terms of both ion selectivity and ion conductivity. As a result, a V-MB FB assembled with a porous PBI membrane delivers a coulombic efficiency(CE) of 99.45% and an energy efficiency(EE) of 86.10% at a current density of 40 mA cm^(-2), which is 12% higher than that afforded by a Nafion 212 membrane. Most importantly, the V-MB FB demonstrates a methylene blue(MB) utilization of 97.55% at a theoretical capacity of 32.16 Ah L^(-1)(based on the concentration of MB in the electrolyte) because of the high ion conductivity of the membrane, which favors reducing the cost of a battery. The results suggest that the designed porous PBI membranes exhibit a very promising prospect for methylene blue-vanadium flow battery.
基金supported by the National Natural Science Founda-tion of China(22078347)National Natural Science Foundation of China(21961160745)+2 种基金Key Research and Development Program of Hebei Province,China(20374001D,21373303D)Science and Technology Program of Guanshanhu([2020]13)Program of Inno-vation Academy for Green Manufacture,CAS(IAGM2020C04).
文摘The magnetically responsive anti-fouling nanofiber membrane(MRANM)was fabricated for efficient oilwater emulsion separation,which could be cleaned using oscillating magnetic field.MRANM was prepared by grafting superparamagnetic Fe_(3)O_(4) nanoparticles onto the surface of electrospun polyacrylonitrile nanofiber membrane(PANM).Compared with PANM,the water contact angle of MRANM decreased from 104°to 0°,indicating that the hydrophilicity of the membrane was significantly improved.For the emulsions of hexadecane,octane and rapeseed oil,the separation efficiency was 98.04%,96.59%and 92.67%,respectively.After the treatments in oscillating magnetic field,the separation efficiency kept above 95%after 8 times recycling,which indicated that the MRANM had good regenerability and reusability.The as-fabricated membrane with magnetic responsiveness facilitated an effective method for solving the membrane fouling problem during practical applications of separation high viscosity oil-water emulsion.
基金supported by the National Natural Science Foundation of China(no.51735013 and 51905520)the Pre‐Research Program in National 14th Five‐Year Plan(grant number 61409230614).
文摘The harsh working environment affects the performance and usage life of Al and its alloys,thus limiting their application.In recent years,Slippery Liquid-infused Porous Surface(SLIPS)has attracted much attention due to excellent anti-corrosion,anti-fouling and anti-icing properties.This may be an effective way to improve the properties of Al and its alloys.Here,the SLIPS with petal-like structure was constructed on the Al alloy via simple hydrothermal reaction,Stearic Acid(STA)modification and lubricant injection.A variety of droplets(including oil-in-water emulsions)can slide on the SLIPS at a low angle,even the Sliding Angle(SA)of the water droplet is only 3°.Furthermore,the SLIPS exhibits outstanding mechanical and chemical properties.It can maintain fine oil-locking ability under high shearing force and keep slippery stability after immersion in acid/alkaline solutions.In addition,the SLIPS possesses excellent anti-corrosion,anti-fouling and anti-icing properties,which provides a new way to promote the application of Al and its alloys.Therefore,the SLIPS is expected to be an effective way to improve the properties of Al and its alloys,as well as play a role in anti-fouling and self-cleaning in construction,shipbuilding and automotive manufacturing industries,thereby expanding the practical application of Al and its alloys.
基金the financial support provided by the National Natural Science Foundation of China(Nos.22108125,21971113,and 22175094)Independent Innovation of Agricultural Science and Technology in Jiangsu Province(Nos.CX(21)3166,and CX(21)3163)+3 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210627)Doctor Project of Mass Entrepreneurship and Innovation in Jiangsu Province(No.JSSCBS20210549)Nanjing Science&Technology Innovation Project for Personnel Studying Abroad and Research Start-up Funding of Nanjing Forestry University(No.163020259)Q.C.Z.appreciates the funding support from City University of Hong Kong and Hong Kong Institute for Advanced Study,City University of Hong Kong.
文摘The clearwater obtained from stabilized oily wastewater has become a worldwide challenge.Nowdays,the area of oil/water emulsion separation materials have accomplished great progress,but still faces the enormous problems of low flux,poor stability,and pollution resistance.Nanocelluloses(cellulose nanocrystals(CNC))with the advantages of hydrophilicity,ecofriendliness,and regeneration are ideal materials for the construction of separation membranes.In this paper,a flexible,antifouling,and durable nanocellulose-based membrane functionalized by block copolymer(poly(N-isopropylacrylamide)-b-poly(N,Ndimethylaminoethyl methacrylate))is prepared via chemical modification and self-assembly,showing high separation efficiency(above 99.6%)for stabilized oil-in-water emulsions,excellent anti-fouling and cycling stability,high-temperature resistance,and acid and alkali resistance.More importantly,the composite membrane has ultra-high flux in separating oil-in-water emulsions(29,003 L·m^(−2)·h^(−1)·bar^(−1))and oil/water mixture(51,444 L·m^(−2)·h^(−1)·bar^(−1)),which ensures high separation efficiency.With its durability,easy scale-up,and green regeneration,we envision this biomass-derived membrane will be an alternative to the existing commercial filter membrane in environmental remediation.
基金Supported by the National Natural Science Foundation of China(Nos.51508078, 51478095)the Jilin Provincial Science and Technology Development Project of China(No.20160520023JH)+1 种基金the Science and Technology Research Project of the Jilin Provincial Education Department, China(No.JJKH20180021KJ)the Fundamental Research Funds for the Central Universities ofCliina(No.2412018ZD016).
文摘A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment.
基金supported by the National Key Research and Development Program of China (Grant No. 2018YFC1105500)the National Natural Science Foundation of China (Grant Nos. U20A20261,31870948,31971250,and 52073205)the Natural Science Foundation of Tianjin (Grant Nos. 20JCYBJC00660 and 21JCYBJC00560)。
文摘Zwitterions have aroused much interest to endow implantable medical devices with anti-fouling and anti-thrombosis performance,due to their ability to form a hydrated layer that can provide a good barrier against protein and cell adhesion. Herein,tyramine modified sulfobetaine-derived sodium hyaluronan(HST) hydrogel coating was fabricated, in which hyaluronan(HA)was used as polysaccharide skeleton to graft zwitterionic sulfobetaine, and tyramine was introduced as crosslinker to construct both the network of hydrogel and a strong covalent bond between coating and substrate. Hydrogel coating was prepared by spin coating or painting HST prepolymer solution under ultraviolet light irradiation. The obtained HST hydrogel coating shows good stability. Moreover, in addition to its outstanding anti-fouling performance and good biocompatibility, it can effectively prevent thrombosis in blood circulation ex vivo. This work offers a universal strategy to prepare a high-performance anti-fouling and antithrombosis coating, which is expected to promote the development of functional coatings for biomedical materials.
基金supported by the National Key Research and Development Program(Grant No.2018YFA0703100)the National Natural Science Foundation of China(Grant No.51733006)。
文摘Direct deployment of gluing and achieving durable robust adhesion in water is challenging due to difficulty in repelling interface water.This work reports a novel hyperbranched polymer-based water-resistant adhesive(HBPBA)based on Michael addition reaction of multi-vinyl monomers with dopamine and 3-aminophenylboronic acid.Upon encountering water,the HBPBA forms coacervates whose hydrophobic chains aggregate to displace interface water,and meanwhile the catechols exposing outwards contribute to underwater adhesion.The HBPBA can strongly glue diverse substrates including PTFE,PE,PET,ceramic,Ti and stainless steel.The HBPBA can maintain stable adhesion in different environments,such as tap water,simulated sea water,PBS,and a wide range of pH solutions(pH 2 to 10)for 3 months,supposedly due to the complexation of catechol with boronic acid.Intriguingly,HBPBA film can be bonded to the titanium surface as a primer,which firmly anchors the antifouling PNAGAPCBAA hydrogel coating through copolymerization of remaining double bonds in HBPBA and NAGA plus CBAA.The PNAGA-PCBAA hydrogel-modified titanium is biocompatible and shows outstanding antifouling ability both in vitro and in vivo.This work proposes a new strategy for creating underwater deployable and water-resistant adhesives that may find promising applications in engineering and biomedical fields.
基金This work was financially supported by the Six Talent Peaks Project in Jiangsu Province(No.SWYY-060)the National Natural Science Foundation of China(No.21504046)the Projects of Nanjing Normal University(Nos.184080H20192,184080H10386 and 184080H202B283).
文摘Antifouling ability and blood compatibility are critically important in the development of medical metallic implants for clinical applications.Here,we report the zwitterionic-phosphonate block polymer as a new type of high-efficiency antifouling coating for metallic substrates.Six block polymers(pSBMA-b-pDEMMP)with different segment lengths(nSBMA:nDEMMP=10:25,40:25,100:25,75:5,75:40,75:100)were prepared and anchored on titanium alloy(TC4)substrates.1H nuclear magnetic resonance(NMR)results clearly showed the precise preparation of the block polymers.XPS analysis and water contact angle measurement indicated the successful construction of the block polymer on TC4 substrates.The relationship between the antifouling performance of the polymer coating and the length of pDEMMP and pSBMA segments in the block polymer was established.Results showed that the polymer containing the pSBMA segment above 40 repeat units could significantly inhibit protein adsorption,platelet adhesion,bacterial adhesion and cell adhesion,while the pDEMMP segment above 5 repeat units is able to generate stable zwitterionic polymer coating on TC4 substrates.This ease of production and high-efficiency antifouling modification strategy elucidated here may find broad application for biomedical implants and devices in clinical applications.
基金The authors acknowledge that this research was supported by the Environmental Security Technology Certification(ESTCP)program,U.S.Department of Defensethe National Natural Science Foundation of China(Grant No.51309103)。
文摘In order to solve the problem of fouling of submerged optical instruments,an air-blast cleaning mechanism was integrated into an optical sensor used for measuring suspended sediment concentration(SSC)in natural waters.Laboratory experiments in a manually created fouling environment were conducted to observe the fouling process on sensor cases made of different materials,and to verify the effectiveness of air-blast cleaning in reducing fouling.Results indicated that sensors with an aluminum case experienced more serious bio-fouling than that with polyethylene case,and the air-blast cleaning mechanism was capable of reducing fouling effect on sensor signals.So the submerged optical instruments should avoid using metal materials.The duration and frequency of air-blast cleaning can be determined and adjusted depending on actual field conditions.
基金supported by National Natural Science Foundation of China(Nos.51678409,51708406,51708407)Tianjin Science Technology Research Funds of China(Nos.16JCZDJC37500,15JCZDJC38300)Tianjin Science and Technology Plan Project(No.18ZXJMTG00120)。
文摘Herein,copper ion doped calcium alginate(Cu^(2+)/CaAlg)composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate(NaAlg)as raw material.The thermal stability and structure of the composite membranes were characterized by thermogravimetric analysis and infrared spectroscopy.The mechanical strength,anti-fouling performance,hydrophilicity and filtration performance of the membrane were studied.The results show that Cu^(2+)/CaAlg hydrogel membrane has excelle nt mechanical properties and thermal stability.The anti-swelling ability of the membrane was greatly enhanced by doping Cu^(2+).After three alternate filtration cycles,the flux recovery rate of Cu^(2+)/CaAlg hydrogel membrane can still reach 85%,indicating that the membrane has good antipollution performance.When the operation pressure was 0.1 MPa,the rejection of coomassie brilliant blue G250 reached 99.8%with a flux of 46.3 L m^(-2)h^(-1),while the Na_(2)SO_(4) rejection was less than 10.0%.The Cu^(2+)/CaAlg membrane was recycled after 24 h in the filtration process,and its flux and rejection rate did not decrease significantly,indicating that the hydrogel membrane has long-term application potential.The Cu^(2+)/CaAlg membrane has a wide range of applications prospect in dye desalination,fine separation and biopharmaceutical technology fields.
基金supported by the National Natural Science Foundation of China(Nos.50673084 and 50433010)National Basic Research Program of China(No.2009CB623402)Natural Science Foundation of Zhejiang province (Y406204)
文摘The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups was achieved by atom transfer radical polymerization(ATRP).The amphiphilic copolymers were characterized by ~1H-NMR, Fourier transform infrared(FTIR) spectroscopy and gel permeation chromatography(GPC).From thermogravimetric analysis (TGA),the decomposition temperature of SHMI-g-PEGMA is low...
基金financially supported by the National Natural Science Foundation of China (21921006, 21706115)the National Key Research and Development Program of China (2017YFC0403702)+1 种基金the Project for Marine Science and Technology Innovation of Jiangsu Province (HY2018-10)Jiangsu Students’ Innovation and Entrepreneurship Training Program (201810291044Z)
文摘Enormous demands on the separation of oil/water(O/W)emulsions in various industries,such as petrochemical,food and pharmaceutical industries,are looking for high performance and energy-efficient separation methods.Ceramic membranes have been used to deal with O/W emulsions,for its outstanding characteristics of easy-operation,high-flux,and long-term stability.However,membrane fouling is still a challenge in the industrial application of ceramic membranes.Herein,antifouling ceramic membranes were fabricated by grafting zwitterions on the membrane surface via an environment-friendly two-step grafting method,which improves the antifouling property and permeability.Successful grafting of such zwitterion on the ceramic surface was assessed by the combination of FTIR and XPS characterization.More importantly,the hydration can be formed by electrostatic interactions layer on the modified membrane,which was confirmed by TGA characterization.The antifouling performance of prepared zwitterionic ceramic membranes in the separation of O/W emulsions was systematically tested.The results suggested that zwitterion can significantly improve the flux of ceramic ultrafiltration membrane,and can also improve antifouling property dramatically by reducing the irreversible fouling in the separation of O/W emulsions.Therefore,zwitterionic ceramic membranes hold promising potentials as an antifouling,highly efficient and green method in the practical purification of the O/W emulsions.
基金financially supported by Hainan Province Science and Technology Special Fund (No. ZDYF2021GXJS210)Hainan Provincial Joint Project of Sanya Yazhou Bay Science and Technology City (No. 2021CXLH0005)+2 种基金Wenhai Program of the S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology (No. 2021WHZZB2301)Overseas Science and Education Centers of Bureau of International Cooperation Chinese Academy of Sciences (No. 121311KYSB20210005)Hainan Institute for Chinese Development Strategy of Engineering & Technology (No. 22-HN-XZ-02) and for providing support。
文摘Designing and fabricating the marine anti-corrosion materials without fluorine by superhydrophobic method is a huge challenge. In this study, an environmentally friendly composite coating was prepared by combing modified expanded graphite(EAG) with nano zinc oxide(ZnO). This coating showed superhydrophobic surface and good corrosion resistance. Fourier transform infrared spectroscopy(FITR), X-ray diffraction(XRD),and scanning electron microscopy(SEM) were used to characterize the materials in fabricating process of the coating. The properties of three composite coatings(ZnO,EAG, and EAG@ZnO) were analyzed, including surface roughness, water contact angle, corrosion resistance, selfcleaning and anti-fouling. The combination of ZnO and EAG caused a big water contact angle, leading superhydrophobic surface of the composite coatings. The electrochemical results showed that the superhydrophobic EAG@ZnO coating had a larger capacitive arc diameter and charge transfer resistance, indicating the enhanced anti-corrosion resistance. Meanwhile, the EAG@ZnO coating also showed good self-cleaning and anti-fouling performance according to solid and liquid pollutants tests.In addition, the mechanical properties and stability of the superhydrophobic EAG@ZnO coatings were evaluated by knife peeling and finger scratch tests. In summary, these superhydrophobic and anti-fouling EAG@ZnO composite coatings provide a potential application in marine corrosion and protection field.
基金The work was funded by the National Natural Science Foundation of China(Grant No.22108203).
文摘In this paper,graphene oxide quantum dots with amino groups(NH_(2)-GOQDs)were tailored to the surface of a thin-film composite(TFC)membrane surface for optimizing forward osmosis(FO)membrane performance using the amide coupling reaction.The results jointly demonstrated hydrophilicity and surface roughness of the membrane enhanced after grafting NH_(2)-GOQDs,leading to the optimized affinity and the contact area between the membrane and water molecules.Therefore,grafting of the membrane with a concentration of 100 ppm(TFC-100)exhibited excellent permeability performance(58.32 L·m^(–2)·h^(–1))compared with TFC membrane(16.94 L·m^(–2)·h^(–1)).In the evaluation of static antibacterial properties of membranes,TFC-100 membrane destroyed the cell morphology of Escherichia coli(E.coli)and reduced the degree of bacterial adsorption.In the dynamic biofouling experiment,TFC-100 membrane showed a lower flux decline than TFC membrane.After the physical cleaning,the flux of TFC-100 membrane could recover to 96%of the initial flux,which was notably better than that of TFC membrane(63%).Additionally,the extended Derjaguin–Landau–Verwey–Overbeek analysis of the affinity between pollutants and membrane surface verified that NH_(2)-GOQDs alleviates E.coli contamination of membrane.This work highlights the potential applications of NH_(2)-GOQDs for optimizing permeability and biofouling mitigation of FO membranes.
基金the National Key Research and Development Program of China(No.2016YFB0600501)Natural Science Foundation of China(Nos.51425405 and 21377130)China Scholarship Council(No.201804910753)。
文摘In membrane distillation(MD),complicated feed water with amphiphilic contaminants induces fouling/wetting of the MD membrane and can even lead to process failure.This study reports a facile approach to fabricate robust and self-healing hybrid amphiphobic membranes for anti-surfactant-wetting MD based on the ultra-low surface energy of fluorinated polyhedral oligomeric silsesquioxanes(F-POSS)and its thermal induced motivation and rotation.The thermal treatment makes the membranes achieving amphiphobicity at a very low cost of F-POSS(13.04 wt.%),which is about 1/3 of without thermal treatment.The prepared membrane exhibits excellent amphiphobicity,i.e.ethanol contact angle of 120.3°,without using environmentally toxic fluorinated nanoparticles.Robust MD performance was observed for the amphiphobic membrane in concentrated sodium dodecyl sulfate(SDS)feed solutions.Furthermore,the fabricated membrane exhibited stable amphiphobicity even in extreme environments,including strong acid or alkaline solutions.In the event of a damaged or abraded membrane surface where the F-POSS can be removed,the amphiphobic membrane exhibits self-healing ability with additional thermal treatment.This simple approach without the use of nanoparticles provides an environmentally friendly way for fabrication of amphiphobic membranes for anti-surfactant-wetting membrane distillation.
基金supported by the National Natural Science Foundation of China (Nos. 51678409, 145 708407, 21476172)Tianjin Science Technology Research Funds of China (Nos. 16JCZDJC37500, 15JCZDJC38300)+1 种基金Program for Innovative Research Team in University of Tianjin (No. TD13-5042)Science Foundation for the Youth Teachers of Peking Union Medical College (No. 2014ZLGC0754)
文摘In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion occurred when Zn^(2+)and Cl-ions gradually diffused into water, creating a well-connected ion channel network and the SF-g-PAN filtration membrane was obtained. The membranes were observed by SEM and 3D ultra-depth microscope. The hydrophilic property, pore size distribution and dye rejection of the membrane were investigated. Results showed that the membrane has no finger hole formation because ZnCl_2 aqueous solution has a lower curing rate parameter compared with organic solvents. SF-gPAN membrane possessed good anti-fouling properties and pH sensitivity. The pore size distribution of the SF-g-PAN membrane was 0.25–1.04 nm. The rejection of direct yellow 27(Mw = 662.6) and amaranth(Mw = 604.5) was 96.51% and 30.63%, with the flux of 72.32 L m^(-2) h^(-1) and 73.83 L m^(-2) h^(-1) respectively at0.1 MPa. The SF-g-PAN membrane has a wide range of applications prospect in fine separation, dye desalination, waste water treatment and biomedical fields.
文摘The advancement in material science and engineering technology has led to the development of antifouling(AF) coatings which are cheaper, durable, less toxic, and safe to the environment. The use of AF coatings containing tributyltin compounds was prohibited at the beginning of 2003, this necessitated the development of environmentally friendly coatings. The fouling release coating(FRC) lacks biocides and has low surface energy, low elastic modulus with smooth surface properties, hence a better release effect to fouling organisms. Several functional coatings have been recently developed based on fouling release(FR) technology to combat the effects of biofouling. Here, we provide a brief overview of innovative technologies and recent developments based on FRCs, including silicone, modified fluorinated polymer,cross-linked coatings, amphiphilic copolymer coating, hydrogel coatings, and biomimetic coatings. We also highlight the key issues and shortcomings of innovative technologies based on FRCs. This may give new insights into the future development of marine AF coatings.
基金supportedby the National Natural Science Foundation of China(Nos.31670981 and 31300788)the Hundred-Talent Program from Chinese Academy of Sciences
文摘Transcatheter aortic heart valves(TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study, composites of poly(ethylene glycol) diacrylate(PEGDA) hydrogels and anisotropic highshrinkage polyethylene terephthalate/polyamide6(PET-PA6) fabric(PEGDA/PET-PA6) were fabricated as artificial heart valve leaflets. Dynamic mechanical analyses(DMA) indicated that PEGDA/PET-PA6 composites possessed anisotropic mechanical properties(i.e., storage moduli ~23.30 ± 1.36 MPa parallel to the aligned fabric fibers and ~9.68 ± 0.90 MPa perpendicular to the aligned fibers at 1 Hz) that were comparable to aortic valve leaflets. The PEGDA/PET-PA6 composites with smooth surfaces were highly hydrophilic(contact angle ~41.6°± 3.8°) and had low-fouling properties without platelet adhesion,suggesting a low risk of thrombogenicity when they interacted with blood. Furthermore, transcatheter aortic heart valves were fabricated using nitinol self-expanding frames and PEGDA/PET-PA6 composites as artificial leaflets, which presented excellent hemodynamic performance with a large orifice area(1.75cm2) and low regurgitation(3.41%), thus meeting the requirements of ISO 5840-3 standard. Therefore,PEGDA/PET-PA6 composites had suitable mechanical properties, good biocompatibility, and low-fouling properties, indicating that they might be used for TAHVs in the future.
基金This work was supported by the National Natural Science Foundation of China(Grant No.11704321)the Natural Science Foundation of Shandong Province(ZR2016JL020 and ZR2019MEM044)the Yantai Science and Technology Plan Projects(2019XDHZ087).
文摘Development of porous materials with anti-fouling and remote controllability is highly desired for oil-water separation application yet still challenging. Herein, to address this challenge, a sponge with unusual superhydrophilicity/superoleophobicity and magnetic property was fabricated through a dip-coating process. To exploit its superhydrophilic/superoleophobic property, the obtained sponge was used as a reusable water sorbent scaffold to collect water from bulk oils without absorbing any oil. Owing to its magnetic property, the sponge was manipulated remotely by a magnet without touching it directly during the whole water collection process, which could potentially lower the cost of the water collection process. Apart from acting as a water-absorbing material, the sponge can also be used as affiliation material to separate water from oil-water mixture and oil in water emulsion selectively, when fixed into a cone funnel. This research provides a key addition to the field of oil-water separation materials.
基金financially supported by the National Natural Science Foundation of China (No. 51473031)Shanghai International S&T Cooperation Fund (No. 16160731302)。
文摘In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic silica (SiO2) nanoparticles onto the surface to improve anti-fouling performance. A range of testing techniques including attenuated total reflection Flourier transformed infrared spectroscopy(ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), water contact angle, mechanical test,filtration and anti-fouling performance were carried out to discuss the influence of different modification conditions on the properties of the membranes. The prepared hollow fiber membranes display the significantly excellent performance when the vinyl trimethoxy silane (VTMS) concentration was 13%, the pH value of the hydrolyzate was 4 and the hydrolysis reaction time was 6 h. In particular, the hydrophilicity of modified membranes was improved effectively, resulting in the enhancement of membrane anti-fouling properties. The results of this work can be consulted for improving the anti-fouling performance of the UHMWPE microfiltration hollow fiber membrane applied in the field of water purification.