Corrosion of reinforced concrete structures is a serious problem in ocean engineering. As an orientation of study, anticorrosion coating technique is developed and widely applied, but many problems need to be solved. ...Corrosion of reinforced concrete structures is a serious problem in ocean engineering. As an orientation of study, anticorrosion coating technique is developed and widely applied, but many problems need to be solved. LSW-2 type anticorrosion coating for maritime reinforced concrete structures is characterized by sea water resistance, salt fog resistance, moisture and heal resistance as well as impermeability to chlorions. The new type coating can be applied to wet concrete surface by conventional construction technique. It is a breakthrough in solving the above mentioned problem. The paper mainly introduces the test results, the property indices, coating procedure, construction technique and economic benefit of Ihe coating.展开更多
Zn-Cr coating was prepared on the surface of sintered NdFeB permanent magnet samples and preparation parameters were established. The anticorrosive property of Zn-Cr coating on NdFeB was studied by whole-immersion tes...Zn-Cr coating was prepared on the surface of sintered NdFeB permanent magnet samples and preparation parameters were established. The anticorrosive property of Zn-Cr coating on NdFeB was studied by whole-immersion test in NaCl solution and compared with that of zinc plating and nickel plating on NdFeB. Open-circuit potential and self-corrosion current of NdFeB samples with and without Zn-Cr coating were measured. The micro-morphology and composition of Zn-Cr coming were analyzed through SEM, XPS, EDS and XRD. The effect of Zn-Cr coating on magnetic property of NdFeB magnet was also investigated. It is exposed that Zn-Cr coating is anodic type coating for NdFeB magnet, and provided substrate electrochemical protection, barrier protection and passivation protection. The anticorrosion property of NdFeB magnet is obviously enhanced by Zn-Cr coating while the magnet property of NdFeB magnet changed little.展开更多
The purpose of this study is to apply the steel coated by cement paste to evaluate the corrosion inhibition of NO_(2)^(-) intercalated Mg-Al layered double hydroxides(LDHs),which was prepared by a conventional calcina...The purpose of this study is to apply the steel coated by cement paste to evaluate the corrosion inhibition of NO_(2)^(-) intercalated Mg-Al layered double hydroxides(LDHs),which was prepared by a conventional calcination-rehydration method.The chloride equilibrium isotherm,open-circuit potential(OCP)and electrochemical impedance spectroscopy(EIS)of steel in the saturated Ca(OH)_(2) solution contaminated by chloride ions were measured.The microstructures of as-obtained LDHs and cement paste containing the LDHs were observed by scanning electron microscope(SEM),X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR)and mercury intrusion porosimetry(MIP).It is found that the technique using the steel coated by the cement paste layer containing the LDHs to represent the steel in real concrete can be applied to accurately evaluate the corrosion inhibition performance of NO_(2)^(-) intercalated LDHs in a short duration.The addition of NO_(2)^(-) intercalated Mg-Al LDHs can improve the absorption capacity of Cl^(-) and the anti-corrosion property of cement paste layer.The combination actions of the refinement of pore structure,uptake of chloride ions and release of inhibitive NO_(2)^(-) contribute to the better corrosion protection property of cement paste layer.Moreover,a schematic mechanism of chloride intrusion for the steel specimen with cement paste layer is developed.展开更多
In order to improve the corrosion resistance of AZ91D magnesium alloy,a coating was formed by a potentiostatic technique from a solutions containing Ce(NO_(3))_(3),Na_(2)MoO_(4)and citric acid(H_(3)Cit).The degree of ...In order to improve the corrosion resistance of AZ91D magnesium alloy,a coating was formed by a potentiostatic technique from a solutions containing Ce(NO_(3))_(3),Na_(2)MoO_(4)and citric acid(H_(3)Cit).The degree of corrosion protection achieved was evaluated in simulated physiological solution by monitoring the open circuit potential,polarization techniques and electrochemical impedance spectroscopy(EIS).Surface analysis techniques(SEM,EDS,X-ray diffraction and X-ray photoelectron spectroscopy(XPS))were used for coating characterization.The film is mainly composed by cerium and molybdenum oxides and magnesium oxides and hydroxides.The obtained results show that the corrosion resistance of the coated electrodes has been increased significantly.This improvement in the anticorrosive performance is in part due to the corrosion inhibition properties of H_(3)Cit.展开更多
Cerium-based conversion coatings were formed on AZ91D magnesium alloy by immersion of the substrate in solutions containing Ce(NO_(3))_(3),H_(2)O_(2) and ascorbic acid(HAsc).The characterisation of the films was perfo...Cerium-based conversion coatings were formed on AZ91D magnesium alloy by immersion of the substrate in solutions containing Ce(NO_(3))_(3),H_(2)O_(2) and ascorbic acid(HAsc).The characterisation of the films was performed by electrochemical and surface analysis techniques such as SEM,EDS,X-ray diffraction and X-ray photoelectron spectroscopy(XPS).The degree of corrosion protection achieved was evaluated in simulated physiological solution by the open circuit potential monitoring,polarisation techniques and electrochemical impedance spectroscopy(EIS).The presence of HAsc in the conversion solution causes changes in the morphology,adherence and anticorrosive performance of the films.The improvement in the corrosion resistance is closely associated with the corrosion inhibition properties of HAsc.展开更多
The anticorrosive properties of cerium based conversion coatings deposited on AA6061-T6 alloy by immersion in tmbuffercd cerium chloride and cerium nitrate solutions in the presence of hydrogen peroxide were investiga...The anticorrosive properties of cerium based conversion coatings deposited on AA6061-T6 alloy by immersion in tmbuffercd cerium chloride and cerium nitrate solutions in the presence of hydrogen peroxide were investigated and characterized by potentiodynamic po- larization （PDP） and electrochemical impedance spectroscopy （EIS） in 0.5 mol/L NaCl aqueous solution. The microstructure and chemical composition of the protective films were examined by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. It was found that the best corrosion protection was afforded by the samples treated during 600 s in cerium chloride solution at pH values ~5.5-4, showing higher amounts of cerium and polarization resistance values greater than 10 f~ m2. Moreover, an ennoblement of the corro- sion potential and decreasing of the cathodic and anodic currents were obtained compared with the cerium nitrate solutions application. This behavior was attributed to the influence of the deposition parameters such as type of the salt anion, i.e., chelating effect and chaotropic characteristics, pH fluctuations in the conversion solution and deposition time.展开更多
文摘Corrosion of reinforced concrete structures is a serious problem in ocean engineering. As an orientation of study, anticorrosion coating technique is developed and widely applied, but many problems need to be solved. LSW-2 type anticorrosion coating for maritime reinforced concrete structures is characterized by sea water resistance, salt fog resistance, moisture and heal resistance as well as impermeability to chlorions. The new type coating can be applied to wet concrete surface by conventional construction technique. It is a breakthrough in solving the above mentioned problem. The paper mainly introduces the test results, the property indices, coating procedure, construction technique and economic benefit of Ihe coating.
文摘Zn-Cr coating was prepared on the surface of sintered NdFeB permanent magnet samples and preparation parameters were established. The anticorrosive property of Zn-Cr coating on NdFeB was studied by whole-immersion test in NaCl solution and compared with that of zinc plating and nickel plating on NdFeB. Open-circuit potential and self-corrosion current of NdFeB samples with and without Zn-Cr coating were measured. The micro-morphology and composition of Zn-Cr coming were analyzed through SEM, XPS, EDS and XRD. The effect of Zn-Cr coating on magnetic property of NdFeB magnet was also investigated. It is exposed that Zn-Cr coating is anodic type coating for NdFeB magnet, and provided substrate electrochemical protection, barrier protection and passivation protection. The anticorrosion property of NdFeB magnet is obviously enhanced by Zn-Cr coating while the magnet property of NdFeB magnet changed little.
基金the Natural Science Foundation of China(No.51478164)The Key Research&Development Plan of Jiangsu Province,China(No.BE2021704)。
文摘The purpose of this study is to apply the steel coated by cement paste to evaluate the corrosion inhibition of NO_(2)^(-) intercalated Mg-Al layered double hydroxides(LDHs),which was prepared by a conventional calcination-rehydration method.The chloride equilibrium isotherm,open-circuit potential(OCP)and electrochemical impedance spectroscopy(EIS)of steel in the saturated Ca(OH)_(2) solution contaminated by chloride ions were measured.The microstructures of as-obtained LDHs and cement paste containing the LDHs were observed by scanning electron microscope(SEM),X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR)and mercury intrusion porosimetry(MIP).It is found that the technique using the steel coated by the cement paste layer containing the LDHs to represent the steel in real concrete can be applied to accurately evaluate the corrosion inhibition performance of NO_(2)^(-) intercalated LDHs in a short duration.The addition of NO_(2)^(-) intercalated Mg-Al LDHs can improve the absorption capacity of Cl^(-) and the anti-corrosion property of cement paste layer.The combination actions of the refinement of pore structure,uptake of chloride ions and release of inhibitive NO_(2)^(-) contribute to the better corrosion protection property of cement paste layer.Moreover,a schematic mechanism of chloride intrusion for the steel specimen with cement paste layer is developed.
基金CONICET(PIP-112-201101-00055)ANPCYT(PICT-2015-0726)Universidad Nacional del Sur(PGI 24/M127),Bahía Blanca,Argentina。
文摘In order to improve the corrosion resistance of AZ91D magnesium alloy,a coating was formed by a potentiostatic technique from a solutions containing Ce(NO_(3))_(3),Na_(2)MoO_(4)and citric acid(H_(3)Cit).The degree of corrosion protection achieved was evaluated in simulated physiological solution by monitoring the open circuit potential,polarization techniques and electrochemical impedance spectroscopy(EIS).Surface analysis techniques(SEM,EDS,X-ray diffraction and X-ray photoelectron spectroscopy(XPS))were used for coating characterization.The film is mainly composed by cerium and molybdenum oxides and magnesium oxides and hydroxides.The obtained results show that the corrosion resistance of the coated electrodes has been increased significantly.This improvement in the anticorrosive performance is in part due to the corrosion inhibition properties of H_(3)Cit.
基金CONICET(PIP-112-201101-00055)ANPCYT(PICT-2012-0141)and Universidad Nacional del Sur(PGI 24/M127)Bahía Blanca,Argentina are acknowledged for financial support.
文摘Cerium-based conversion coatings were formed on AZ91D magnesium alloy by immersion of the substrate in solutions containing Ce(NO_(3))_(3),H_(2)O_(2) and ascorbic acid(HAsc).The characterisation of the films was performed by electrochemical and surface analysis techniques such as SEM,EDS,X-ray diffraction and X-ray photoelectron spectroscopy(XPS).The degree of corrosion protection achieved was evaluated in simulated physiological solution by the open circuit potential monitoring,polarisation techniques and electrochemical impedance spectroscopy(EIS).The presence of HAsc in the conversion solution causes changes in the morphology,adherence and anticorrosive performance of the films.The improvement in the corrosion resistance is closely associated with the corrosion inhibition properties of HAsc.
基金supported by National Research Network of the National Council for Science and Technology of Mexico (228198)
文摘The anticorrosive properties of cerium based conversion coatings deposited on AA6061-T6 alloy by immersion in tmbuffercd cerium chloride and cerium nitrate solutions in the presence of hydrogen peroxide were investigated and characterized by potentiodynamic po- larization （PDP） and electrochemical impedance spectroscopy （EIS） in 0.5 mol/L NaCl aqueous solution. The microstructure and chemical composition of the protective films were examined by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. It was found that the best corrosion protection was afforded by the samples treated during 600 s in cerium chloride solution at pH values ~5.5-4, showing higher amounts of cerium and polarization resistance values greater than 10 f~ m2. Moreover, an ennoblement of the corro- sion potential and decreasing of the cathodic and anodic currents were obtained compared with the cerium nitrate solutions application. This behavior was attributed to the influence of the deposition parameters such as type of the salt anion, i.e., chelating effect and chaotropic characteristics, pH fluctuations in the conversion solution and deposition time.
