To determine the distribution of active earth pressure on retaining walls, a series of model tests with the horizontally translating rigid walls are designed. Particle image velocimetry is used to study the movement a...To determine the distribution of active earth pressure on retaining walls, a series of model tests with the horizontally translating rigid walls are designed. Particle image velocimetry is used to study the movement and shear strain during the active failure of soil with height H and friction angle φ. The test results show that there are 3 stages of soil deformation under retaining wall translation: the initial stage, the expansion stage and the stability stage. The stable sliding surface in the model tests can be considered to be composed of two parts. Within the height range of 0.82 H-1.0 H, it is a plane at an angle of π/4+φ/2 to the horizontal plane. In the height range of 0-0.82 H, it is a curve between a logarithmic spiral and a plane at an angle of π/4+φ/2 to the horizontal. A new method applicable to any sliding surface is proposed for active earth pressure with the consideration of arching effect. The active earth pressure is computed with the actual shape of the slip surface and compared with model test data and with predictions obtained by existing methods. The comparison shows that predictions from the newly proposed method are more consistent with the measured data than the predictions from the other methods.展开更多
In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pil...In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pile and subsoil. When the mobilized shear stress is less than the shear strength, partially developed arching will occur. Consequently, existing analytical methods, adopting the ultimate shear strength failure criterion, need to be improved. This study developed a simplified 2 D analytical method, which is based on the developing arching effect, to evaluate the load redistribution of the PGR embankment. Then, the influences of embankment height and internal friction angle, subsoil depth, ratio of pile cap width to pile clear spacing(RPC) and geosynthetic tensile stiffness on the critical height ratio, stress concentration ratio, soil arching ratio, geosynthetic tension and axial strain were investigated. This study suggests that a RPC of 1:1.0 and a one-way of single-layer geosynthetic tensile stiffness of 2000 kN/m should be considered as the sensitivity thresholds for the PGR embankment.展开更多
Combined with practical engineering, based on the introduction of soil arching theory, we explore the impact of barrier piles in blind sheet-pile bank connecting structure. Besides, we build a plane strain model by AB...Combined with practical engineering, based on the introduction of soil arching theory, we explore the impact of barrier piles in blind sheet-pile bank connecting structure. Besides, we build a plane strain model by ABAQUS sot＇cware to study the impact of cross section type, the pile spacing and soil properties on soil arching effect. We find that cross section type of the pile has a certain influence on soil stress distribution in front of the barrier piles by comparing circular cross section and rectangular cross section. We also find that clear distance between the barrier piles and cohesive force of the soil have a great influence on that impact. We can increase clear distance between the barrier piles appropriately to improve the efficiency of construction and reduce the proiect cost.展开更多
This study presents a detailed investigation into the soil arching effects within deep foundation pits(DFPs),focusing on their mechanical behavior and implications for structural design.Through rigorous 3D finite elem...This study presents a detailed investigation into the soil arching effects within deep foundation pits(DFPs),focusing on their mechanical behavior and implications for structural design.Through rigorous 3D finite element modeling and parameter sensitivity analyses,the research explores the formation,geometric characteristics,and spatial distribution of soil arching phenomena.The investigation encompasses the influence of key parameters such as elastic modulus,cohesion,and internal friction angle on the soil arching effect.The findings reveal that soil arching within DFPs exhibits distinct spatial characteristics,with the prominent arch axis shifting as excavation depth progresses.Optimal soil arching is observed when the pile spacing approximates three times the pile diameter,enhancing soil retention and minimizing deformation risks.Sensitivity analyses highlight the significant impact of soil parameters on soil arching behavior,underscoring the critical role of cohesive forces and internal friction angles in shaping arching characteristics.By elucidating the interplay between soil parameters and soil arching effects,the research provides insights for optimizing pile spacing and structural stability.展开更多
Tunnelling has increasingly become an essential tool in the exploration of underground space.A typical construction problem is the face instability during tunnelling,posing a great threat to associated infrastructures...Tunnelling has increasingly become an essential tool in the exploration of underground space.A typical construction problem is the face instability during tunnelling,posing a great threat to associated infrastructures.Tunnel face instability often occurs with the soil arching collapse.This study investigates the combined effect of cutterhead opening ratio and soil non-uniformity on soil arching effect and face stability,via conducting random finite-element analysis coupled with Monte–Carlo simulations.The results underscore that the face stability is strongly associated with the evolution of stress arch.The obtained stability factors in the uniform soils can serve as a reference for the design of support pressure in practical tunnelling engineering.In addition,non-uniform soils exhibit a lower stability factor than uniform soils,which implies that the latter likely yields an underestimated probability of face failure.The tunnel face is found to have a probability of failure more than 50%if the spatial non-uniformity of soil is ignored.In the end,a practical framework is established to determine factor of safety(FOS)corresponding to different levels of probability of face failure considering various opening ratios in non-uniform soils.The required FOS is 1.70 to limit the probability of face instability no more than 0.1%.Our findings can facilitate the prediction of probability of instability in the conventionally deterministic design of face pressure.展开更多
For the project of pipe jacking in cohesionless soil,it is key to determine the vertical load on jacked pipe so as to predict the jacking force accurately.In this paper,a new parabolic soil arching model was proposed ...For the project of pipe jacking in cohesionless soil,it is key to determine the vertical load on jacked pipe so as to predict the jacking force accurately.In this paper,a new parabolic soil arching model was proposed to calculate the vertical load on jacked pipe.This proposed analytical model was composed of parabolic soil arching zone,parabola-typed collapse zone and friction arch zone.Combined with existing literature,the key parameters(i.e.,height of parabolic soil arching,horizontal pressure coefficient and width and height of friction arch)were determined.In addition,considering that the trajectory of major stress is parabola,the formula of horizontal pressure coefficient was deduced in the friction arch.The parabolic soil arching zone is assumed as a three-hinged arch with reasonable arch axis,and the formula of load transfer was derived considering the transition effect of parabolic soil arching.The results of experiment,theoretical models and numerical model were adopted to verify the proposed analytical model.Finally,the influence of the key parameters on the vertical load on jacked pipe were also discussed in detail.This work provides a meaningful reference for evaluating the vertical load on jacked pipe for design of pipe jacking.展开更多
Shield tunneling and post-tunneling steady seepage are accompanied by stress and displacement variations,which could induce and influence the soil arching effect.Although there are many studies on the tunneling-induce...Shield tunneling and post-tunneling steady seepage are accompanied by stress and displacement variations,which could induce and influence the soil arching effect.Although there are many studies on the tunneling-induced soil arching effect,the research about the effect of seepage on soil arching effect is extremely lacking.In this study,a numerical model is firstly established and verified by field data.Then,a series of numerical models,whose simulation method of steady seepage is verified by adopting the conformal mapping technique,are established to study the soil arching evolution of deep-buried tunneling and post-construction steady seepage.The results indicate that seepage leads to an increase in effective vertical stress,which is consistent with the existing theory.The seepage weakens the soil arching effect resulting in the height of the arch zone reducing from 2.38D(D is the tunnel diameter)to 1.25D.The seepage leads to the further development of ground consolidation settlement,but the differential displacement in the soil mass decreases.The ground reaction curve in the steady seepage condition shows a bigger value than that after excavation.It is reasonable to control the ground loss ratio in the range of 0.5–1.0%,which can minimize overburden pressure with moderate ground deformation.展开更多
Predicting the inner displacements of deep vertical shafts during the excavation process has been a difficult task considering the geological,structural,and constructional influences.In fact,the two-dimensional(2D)ana...Predicting the inner displacements of deep vertical shafts during the excavation process has been a difficult task considering the geological,structural,and constructional influences.In fact,the two-dimensional(2D)analytical solution based on the retaining wall model remains insufficient for understanding the actual behavior during an excavation.This is because the deformation of vertical shafts becomes complicated due to the unexpected arching effect brought about by the three-dimensional(3D)flexible displacements occurring in the excavation process.Previous analytical solutions only considered the limit equilibrium.Therefore,the present study deals with a 3D soil-structure simulation by considering the displacements of a cylindrical shaft and the mechanical behavior of the surrounding soil as well as the geometry of the cylindrical structure.Moreover,this mechanical behaviors of the surrounding soil and shaft are controlled by the shaft stiffness;hence,the relationships among the shaft stiffness,mechanical behavior of the surrounding soil(in terms of earth pressure coefficient),and shaft displacement were investigated.A cylindrical model,120 m in depth and 20 m in diameter,was positioned at the center of a sand domain,and each excavation step was performed at an interval depth of 20 m.A 3D finite difference method analysis was applied using the modified Cam-Clay(MCC)model to represent the soil behavior.As a result,the present study provides a new normalized lateral earth pressure theory for excavated shafts by considering the 3D arching effect obtained from parametric studies using various levels of shaft stiffness.From a comparison with the analytical solutions of previous studies(Terzaghi,1943a;Prater,1977;Cheng&Hu,2005),it is found that the previous studies underestimated the earth pressure acting on the cylindrical shaft because they did not consider the accurate arching effect.展开更多
Seismic pile–slope stability analysis and the formation mechanism of soil arching have not been well studied. This study used a threedimensional(3D) finite difference to determine soil and pile parameter changes in t...Seismic pile–slope stability analysis and the formation mechanism of soil arching have not been well studied. This study used a threedimensional(3D) finite difference to determine soil and pile parameter changes in the static and seismic stability of the pile–slope caused by the interaction between stabilizing piles. Pile–slope stability analysis was performed to determine the optimal design of piles along a slope and the corresponding failure mode involving the formation of soil arching around two adjacent piles. The Factor of Safety(FS) of the slope was evaluated using the shear strength reduction method for static and seismic analyses. The results of the analysis show that suitable pile spacing(S) and a suitable pile diameter(D) in the middle of a slope result in the maximum FS for the pile–slope system and the formation of soil arching around two adjacent piles. FS of the pile–slope increased negligibly in the seismic analysis of piles located at the slope crest and toe. An optimized pile diameter and installation location afforded the maximum FS for the slope that corresponded to a specified slope failure mode for different pile locations. A pile spacing S ≤ 2.5D for piles installed in the middle of the slope is suggested for increasing the static and seismic pile–slope stability.展开更多
Based on the characteristics of the top coal thickness of the fully mechanized caving in special thick coal seam,the long distance of coal gangue caving,as well as the different sizes of the coal gangue broken fragmen...Based on the characteristics of the top coal thickness of the fully mechanized caving in special thick coal seam,the long distance of coal gangue caving,as well as the different sizes of the coal gangue broken fragment dimension and spatial variation of drop flow,this paper uses laboratory dispersion simulation experiment and theoretical analysis to study the arch structure effect and its influence rule on the top coal loss in the process of coal gangue flow.Research shows that in the process of coal gangue flow,arch structure can be formed in three types:the lower arch structure,middle arch structure,and upper arch structure.Moreover,the arch structure has the characteristics of dynamic random arch,the formation probability of dynamic random arch with different layers is not the same,dynamic random arch caused the reduction of the top coal fluency;analyzing the dynamic random arch formation mechanism,influencing factors,and the conditions of instability;the formation probability of the lower arch structure is the highest,the whole coal arch and the coal gangue arch structure has the greatest impact on top coal loss.Therefore,to prevent or reduce the formation of lower whole coal arch structure,the lower coal gangue arch structure and the middle whole coal arch structure is the key to reduce the top coal loss.The research conclusion provides theoretical basis for the further improvement of the top coal recovery rate of the fully mechanized caving in extra thick coal seam.展开更多
Load transformation from the yielding part of the soil to the adjacent part is known as the soil arching effect,which plays an important role in the design of various geotechnical infrastructures.Terzaghi’s trapdoor ...Load transformation from the yielding part of the soil to the adjacent part is known as the soil arching effect,which plays an important role in the design of various geotechnical infrastructures.Terzaghi’s trapdoor test was an importantmilestone in the development of theories on soil arching.The research on earth pressure of the trapdoor problem is presented in this paper using the three-dimensional(3D)discrete element method(DEM).Five 3D trapdoor models with different heights are established by 3DDEMsoftware PFC 3D.The variation of earth pressure on the trapdoor with the downward movement of the trapdoor,the distribution of vertical earth pressure along the horizontal direction,the distribution of vertical earth pressure along the vertical direction,the distribution of lateral earth pressure coefficient along the depth direction,the magnitude and direction of contact force chain are studied,respectively.Related research results show that the earth pressure on the trapdoor decreases rapidly after the downward movement of the trapdoor,and then reaches the minimum earth pressure.After that,the earth’s pressure will rise slightly,and whether this phenomenon occurs depends on the depth ratio.For the bottom soil,due to the stress transfer caused by the soil arching effect,the ratio of earth pressure in the loose area decreases,while the ratio of earth pressure in the stable area increases.With the trapdoor moving down,the vertical earth pressure along the depth in the stable zone is basically consistent with the initial state,which shows an approximate linear distribution.After the trapdoor moves down,the distribution of earth pressure along with the depth in the loose area changes,which is far less than the theoretical value of vertical earth pressure of its self-weight.Because of the compression of the soil on both sides,the lateral earth pressure coefficient of most areas on the central axis of the loose zone is close to the passive earth pressure coefficient Kp.The existence of a‘soil arch’can be observed intuitively from the distribution diagram of the contact force chain in the loose zone.展开更多
The computation of the design load on culverts in the current Chinese General Code for Design of Highway Bridges and Culverts （CGCDHBC）is primarily based on the linear earth pressure theory, which cannot accurately ...The computation of the design load on culverts in the current Chinese General Code for Design of Highway Bridges and Culverts （CGCDHBC）is primarily based on the linear earth pressure theory, which cannot accurately reflect the changes in vertical loads on trench installation culverts. So the changes in vertical earth pressure and soil arching effect in the backfill for an unsymmetrical trench installation culvert are studied based on a full scale experiment and finite element （FE） simulation. The variation laws of foundation pressure and settlement are also analyzed. Meanwhile, the influence of eccentric load induced by an unsymmetrical trench installation on the interaction of a soil- structure system is discussed. Results show that soil arch is formed when the backfill on the culvert reaches a certain height. It can relieve the earth pressure concentration on the crest of the culvert, but it is instable. The earth pressures obtained by full scale experiment and numerical simulation are greater than those calculated by the current CGCDHBC method. The eccentric load effect on the culvert has a significant influence on the stress states and deformation of the soil-structure system.展开更多
Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experi...Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experimental results show that arching effect is absent shortly after the placement of CPB in stopes.However,stress decreases in barricade drift with increasing distance between the measurement points and drawpoint have also been observed,demonstrating arching effect shortly after the pouring of CPB.To explain these paradoxes,CPB is considered as Bingham fluid having a yield shear stress.Three dimensional analytical solutions are proposed to evaluate the short-term total stresses in backfilled stopes and on barricades,accounting for the CPB's yield shear stress-induced arching effect.Stress diminution due to such arching effect in the backfilled stopes and on barricades is indeed obtained.But the reduction becomes insignificant using typical yield shear stress and stope geometry.More analyses indicate that the typical yield shear stress values do not fully correspond to field conditions where the yield shear stress would increase exponentially due to apparent consolidation(loss of water by drainage,a phenomenon similar to the desiccation of overly saturated fine-grained materials).展开更多
Wind speed forecasting is signif icant for wind farm planning and power grid operation. The research in this paper uses Eviews software to build the ARMA (autoregressive moving average) model of wind speed time series...Wind speed forecasting is signif icant for wind farm planning and power grid operation. The research in this paper uses Eviews software to build the ARMA (autoregressive moving average) model of wind speed time series, and employs Lagrange multipliers to test the ARCH (autoregressive conditional heteroscedasticity) effects of the residuals of the ARMA model. Also, the corresponding ARMA-ARCH models are established, and the wind speed series are forecasted by using the ARMA model and ARMA-ARCH model respectively. The comparison of the forecasting accuracy of the above two models shows that the ARMA-ARCH model possesses higher forecasting accuracy than the ARMA model and has certain practical value.展开更多
The consideration of unsaturated conditions is infrequently addressed in current Terzaghi’s soil arching research.A modified analytical method for calculation of unsaturated loosening earth pressure above shallow tra...The consideration of unsaturated conditions is infrequently addressed in current Terzaghi’s soil arching research.A modified analytical method for calculation of unsaturated loosening earth pressure above shallow trapdoor is proposed in this paper.By assuming the existence of a vertical slip surface above the trapdoor,the stress state of the soil in the loosening area are delineated in the extended Mohr–Coulomb circle.To account for the non-uniform distribution of vertical stress at arbitrary points along the horizontal differential soil trip,a virtual rotation circle trajectory of major principal stress is employed.Subsequently,the average vertical stress acting on the soil trip is determined through integral approach.Taking into account the influence of matric suction on soil weight and apparent cohesion,the differential equation governing the soil trip is solved analytically for cases of uniform matric suction distribution and alternatively using the finite difference method for scenarios involving non-uniform matric suction distribution.The proposed method’s validity is confirmed through comparison with published results.The parameter analysis indicates that the loosening earth pressure initially decreases and subsequently increases with the increase of the soil saturation.With the rise of groundwater level,the normalized effective loosening earth pressure shows a decreasing trend.展开更多
In order to investigate the influence of face instability for tunnels with different burial depths in sandy cobble strata on earth pressure and the instability region,geomechanical model tests and numerical simulation...In order to investigate the influence of face instability for tunnels with different burial depths in sandy cobble strata on earth pressure and the instability region,geomechanical model tests and numerical simulations were performed.The continuous excavation method was adopted to reduce the pressure of the soil bin and restore the real engineering situation.Earth pressure in three directions of the obser-vation section in front of the tunnel face was monitored during the tunneling of the shield.Evolutions of the lateral stress ratios at dif-ferent stages were also investigated.The instability area of the shield tunnel face in sandy cobble strata with different burial depth ratios during the instability stage was obtained based on the change ratio of earth pressure and compared with existing researches.The earth pressure began to change when the excavation was one shield diameter away from the observation section,and when the excavation reached the observation section,the earth pressure decreased significantly.The burial depth of shield tunnel in the sandy cobble strata has a significant impact on the evolution of soil arch and the size of the failure area.The numerical simulation of the continuum medium cannot reflect the stress redistribution characteristics of the granular body like sandy cobble strata,and the failure area or stress distur-bance area obtained by the model test is larger than the numerical simulation result.Existing methods have deviations in analyzing the failure area of shield tunnel face in sandy cobble strata.It provides not only guidance for shield tunnel excavation engineering in sandy cobble strata,but also a reference for the theoretical research on failure areas.展开更多
A simplified geomechanical model was proposed by considering three typical neckingtype slopes;this model lays a foundation for the further investigation of the deformation behaviors of such slopes.Three physical model...A simplified geomechanical model was proposed by considering three typical neckingtype slopes;this model lays a foundation for the further investigation of the deformation behaviors of such slopes.Three physical models of necking-type slopes were built according to the geomechanical model with slope evolution stages.Finally,preliminary calculations related to the arching effect in the physical model were conducted.Three evolution stages of necking-type slopes,namely,the initial stage,compression stage,and failure stage,were presented based on the formation and disappearance of the arching effect within the slope.The specific parameters of the geomechanical model were given.In the setup of the tilting test,the failure angle of the necking-type slope model was calculated to be approximately 50°with a large lateral resistance coefficient.The proposed geomechanical model and physical models of necking-type slopes provide guidance for the establishment of geomechanical and physical models of landslides at specific sites.展开更多
This paper focuses on theoretical analytical models to calculate the limit support pressure and vertical earth pressure on the cutting face for tunnels.The failure zone is divided into two parts:a sliding failure zone...This paper focuses on theoretical analytical models to calculate the limit support pressure and vertical earth pressure on the cutting face for tunnels.The failure zone is divided into two parts:a sliding failure zone and an upper loosen zone,and the limit support pressure calculation equation is derived.To verify the rationality of the theoretical model,it was compared with the existing theory,numerical simulation,and centrifugal test,and then the parameter analysis was carried out.The results show that the results of this paper agree well with the existing theory,numerical simulation,and centrifugal test.The inclination angle of the proposed mechanism is determined based on the results of the existing centrifuge test,and the recommended inclination angle is between 52°+φ/2 and 54°+φ/2.The method is proven to be safe and accurate.It can provide a theoretical basis for similar projects.展开更多
基金Projects(51978084, 51678073) supported by the National Natural Science Foundation of ChinaProject(2020JJ4605) supported by the Natural Science Foundation of Hunan Province, ChinaProject(2019IC13) supported by the International Cooperation and Development Project of Double First-Class Scientific Research in Changsha University of Science & Technology, China。
文摘To determine the distribution of active earth pressure on retaining walls, a series of model tests with the horizontally translating rigid walls are designed. Particle image velocimetry is used to study the movement and shear strain during the active failure of soil with height H and friction angle φ. The test results show that there are 3 stages of soil deformation under retaining wall translation: the initial stage, the expansion stage and the stability stage. The stable sliding surface in the model tests can be considered to be composed of two parts. Within the height range of 0.82 H-1.0 H, it is a plane at an angle of π/4+φ/2 to the horizontal plane. In the height range of 0-0.82 H, it is a curve between a logarithmic spiral and a plane at an angle of π/4+φ/2 to the horizontal. A new method applicable to any sliding surface is proposed for active earth pressure with the consideration of arching effect. The active earth pressure is computed with the actual shape of the slip surface and compared with model test data and with predictions obtained by existing methods. The comparison shows that predictions from the newly proposed method are more consistent with the measured data than the predictions from the other methods.
基金Project(51508279) supported by the National Natural Science Foundation of ChinaProject(KFJ170104) supported by the Open Fund of National Engineering Laboratory of Highway Maintenance Technology of Changsha University of Science & Technology, China+1 种基金Project(BK20150885) supported by the Jiangsu Provincial Natural Science Fund, ChinaProject(2019003) supported by the Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering of Hohai University, China。
文摘In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pile and subsoil. When the mobilized shear stress is less than the shear strength, partially developed arching will occur. Consequently, existing analytical methods, adopting the ultimate shear strength failure criterion, need to be improved. This study developed a simplified 2 D analytical method, which is based on the developing arching effect, to evaluate the load redistribution of the PGR embankment. Then, the influences of embankment height and internal friction angle, subsoil depth, ratio of pile cap width to pile clear spacing(RPC) and geosynthetic tensile stiffness on the critical height ratio, stress concentration ratio, soil arching ratio, geosynthetic tension and axial strain were investigated. This study suggests that a RPC of 1:1.0 and a one-way of single-layer geosynthetic tensile stiffness of 2000 kN/m should be considered as the sensitivity thresholds for the PGR embankment.
文摘Combined with practical engineering, based on the introduction of soil arching theory, we explore the impact of barrier piles in blind sheet-pile bank connecting structure. Besides, we build a plane strain model by ABAQUS sot＇cware to study the impact of cross section type, the pile spacing and soil properties on soil arching effect. We find that cross section type of the pile has a certain influence on soil stress distribution in front of the barrier piles by comparing circular cross section and rectangular cross section. We also find that clear distance between the barrier piles and cohesive force of the soil have a great influence on that impact. We can increase clear distance between the barrier piles appropriately to improve the efficiency of construction and reduce the proiect cost.
基金supported by Key R&D Program of Shandong Province,China(Grant No.2021CXGC011203).
文摘This study presents a detailed investigation into the soil arching effects within deep foundation pits(DFPs),focusing on their mechanical behavior and implications for structural design.Through rigorous 3D finite element modeling and parameter sensitivity analyses,the research explores the formation,geometric characteristics,and spatial distribution of soil arching phenomena.The investigation encompasses the influence of key parameters such as elastic modulus,cohesion,and internal friction angle on the soil arching effect.The findings reveal that soil arching within DFPs exhibits distinct spatial characteristics,with the prominent arch axis shifting as excavation depth progresses.Optimal soil arching is observed when the pile spacing approximates three times the pile diameter,enhancing soil retention and minimizing deformation risks.Sensitivity analyses highlight the significant impact of soil parameters on soil arching behavior,underscoring the critical role of cohesive forces and internal friction angles in shaping arching characteristics.By elucidating the interplay between soil parameters and soil arching effects,the research provides insights for optimizing pile spacing and structural stability.
基金supported by the Natural Science Foundation Innovation Group Project of Hubei Province,China(Grant No.2023AFA017)the NRF-NSFC 3rd Joint Research Grant(Earth Science)(Grant No.41861144022).
文摘Tunnelling has increasingly become an essential tool in the exploration of underground space.A typical construction problem is the face instability during tunnelling,posing a great threat to associated infrastructures.Tunnel face instability often occurs with the soil arching collapse.This study investigates the combined effect of cutterhead opening ratio and soil non-uniformity on soil arching effect and face stability,via conducting random finite-element analysis coupled with Monte–Carlo simulations.The results underscore that the face stability is strongly associated with the evolution of stress arch.The obtained stability factors in the uniform soils can serve as a reference for the design of support pressure in practical tunnelling engineering.In addition,non-uniform soils exhibit a lower stability factor than uniform soils,which implies that the latter likely yields an underestimated probability of face failure.The tunnel face is found to have a probability of failure more than 50%if the spatial non-uniformity of soil is ignored.In the end,a practical framework is established to determine factor of safety(FOS)corresponding to different levels of probability of face failure considering various opening ratios in non-uniform soils.The required FOS is 1.70 to limit the probability of face instability no more than 0.1%.Our findings can facilitate the prediction of probability of instability in the conventionally deterministic design of face pressure.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFC1509704)Young Teachers’Research Ability Improvement Plan of Beijing University of Civil Engineering and Architecture(Grant No.X23005)Beijing Municipal Engineering Institute.
文摘For the project of pipe jacking in cohesionless soil,it is key to determine the vertical load on jacked pipe so as to predict the jacking force accurately.In this paper,a new parabolic soil arching model was proposed to calculate the vertical load on jacked pipe.This proposed analytical model was composed of parabolic soil arching zone,parabola-typed collapse zone and friction arch zone.Combined with existing literature,the key parameters(i.e.,height of parabolic soil arching,horizontal pressure coefficient and width and height of friction arch)were determined.In addition,considering that the trajectory of major stress is parabola,the formula of horizontal pressure coefficient was deduced in the friction arch.The parabolic soil arching zone is assumed as a three-hinged arch with reasonable arch axis,and the formula of load transfer was derived considering the transition effect of parabolic soil arching.The results of experiment,theoretical models and numerical model were adopted to verify the proposed analytical model.Finally,the influence of the key parameters on the vertical load on jacked pipe were also discussed in detail.This work provides a meaningful reference for evaluating the vertical load on jacked pipe for design of pipe jacking.
基金supported by the National Natural Science Foundation of China(Grant Nos.52090082,51938005,52122807,and 52108318)China Hunan Provincial Science&Technology Department(Grant Nos.2021RC3043 and 2021JJ30119).
文摘Shield tunneling and post-tunneling steady seepage are accompanied by stress and displacement variations,which could induce and influence the soil arching effect.Although there are many studies on the tunneling-induced soil arching effect,the research about the effect of seepage on soil arching effect is extremely lacking.In this study,a numerical model is firstly established and verified by field data.Then,a series of numerical models,whose simulation method of steady seepage is verified by adopting the conformal mapping technique,are established to study the soil arching evolution of deep-buried tunneling and post-construction steady seepage.The results indicate that seepage leads to an increase in effective vertical stress,which is consistent with the existing theory.The seepage weakens the soil arching effect resulting in the height of the arch zone reducing from 2.38D(D is the tunnel diameter)to 1.25D.The seepage leads to the further development of ground consolidation settlement,but the differential displacement in the soil mass decreases.The ground reaction curve in the steady seepage condition shows a bigger value than that after excavation.It is reasonable to control the ground loss ratio in the range of 0.5–1.0%,which can minimize overburden pressure with moderate ground deformation.
基金partly supported by Association for Disaster Prevention Research.
文摘Predicting the inner displacements of deep vertical shafts during the excavation process has been a difficult task considering the geological,structural,and constructional influences.In fact,the two-dimensional(2D)analytical solution based on the retaining wall model remains insufficient for understanding the actual behavior during an excavation.This is because the deformation of vertical shafts becomes complicated due to the unexpected arching effect brought about by the three-dimensional(3D)flexible displacements occurring in the excavation process.Previous analytical solutions only considered the limit equilibrium.Therefore,the present study deals with a 3D soil-structure simulation by considering the displacements of a cylindrical shaft and the mechanical behavior of the surrounding soil as well as the geometry of the cylindrical structure.Moreover,this mechanical behaviors of the surrounding soil and shaft are controlled by the shaft stiffness;hence,the relationships among the shaft stiffness,mechanical behavior of the surrounding soil(in terms of earth pressure coefficient),and shaft displacement were investigated.A cylindrical model,120 m in depth and 20 m in diameter,was positioned at the center of a sand domain,and each excavation step was performed at an interval depth of 20 m.A 3D finite difference method analysis was applied using the modified Cam-Clay(MCC)model to represent the soil behavior.As a result,the present study provides a new normalized lateral earth pressure theory for excavated shafts by considering the 3D arching effect obtained from parametric studies using various levels of shaft stiffness.From a comparison with the analytical solutions of previous studies(Terzaghi,1943a;Prater,1977;Cheng&Hu,2005),it is found that the previous studies underestimated the earth pressure acting on the cylindrical shaft because they did not consider the accurate arching effect.
文摘Seismic pile–slope stability analysis and the formation mechanism of soil arching have not been well studied. This study used a threedimensional(3D) finite difference to determine soil and pile parameter changes in the static and seismic stability of the pile–slope caused by the interaction between stabilizing piles. Pile–slope stability analysis was performed to determine the optimal design of piles along a slope and the corresponding failure mode involving the formation of soil arching around two adjacent piles. The Factor of Safety(FS) of the slope was evaluated using the shear strength reduction method for static and seismic analyses. The results of the analysis show that suitable pile spacing(S) and a suitable pile diameter(D) in the middle of a slope result in the maximum FS for the pile–slope system and the formation of soil arching around two adjacent piles. FS of the pile–slope increased negligibly in the seismic analysis of piles located at the slope crest and toe. An optimized pile diameter and installation location afforded the maximum FS for the slope that corresponded to a specified slope failure mode for different pile locations. A pile spacing S ≤ 2.5D for piles installed in the middle of the slope is suggested for increasing the static and seismic pile–slope stability.
基金the Independent Research Subject of State Key Laboratory of Coal Resources and Mine Safety of China University of Mining and Technology (No.SKLCRSM12X03)the Scientific Research and Innovation Project for College Graduates in Jiangsu (No.CXZZ13_0947)+1 种基金Top-Notch Academic Programs of Jiangsu Higher Education Institutionsthe Priority Academic Development Program of Jiangsu Higher Education Institutions
文摘Based on the characteristics of the top coal thickness of the fully mechanized caving in special thick coal seam,the long distance of coal gangue caving,as well as the different sizes of the coal gangue broken fragment dimension and spatial variation of drop flow,this paper uses laboratory dispersion simulation experiment and theoretical analysis to study the arch structure effect and its influence rule on the top coal loss in the process of coal gangue flow.Research shows that in the process of coal gangue flow,arch structure can be formed in three types:the lower arch structure,middle arch structure,and upper arch structure.Moreover,the arch structure has the characteristics of dynamic random arch,the formation probability of dynamic random arch with different layers is not the same,dynamic random arch caused the reduction of the top coal fluency;analyzing the dynamic random arch formation mechanism,influencing factors,and the conditions of instability;the formation probability of the lower arch structure is the highest,the whole coal arch and the coal gangue arch structure has the greatest impact on top coal loss.Therefore,to prevent or reduce the formation of lower whole coal arch structure,the lower coal gangue arch structure and the middle whole coal arch structure is the key to reduce the top coal loss.The research conclusion provides theoretical basis for the further improvement of the top coal recovery rate of the fully mechanized caving in extra thick coal seam.
基金supports from National Natural Science Foundation of China (NSFC Grant No.52008373)Natural Science Foundation of Zhejiang Province of China (No.Q22E080445)are greatly acknowledged.
文摘Load transformation from the yielding part of the soil to the adjacent part is known as the soil arching effect,which plays an important role in the design of various geotechnical infrastructures.Terzaghi’s trapdoor test was an importantmilestone in the development of theories on soil arching.The research on earth pressure of the trapdoor problem is presented in this paper using the three-dimensional(3D)discrete element method(DEM).Five 3D trapdoor models with different heights are established by 3DDEMsoftware PFC 3D.The variation of earth pressure on the trapdoor with the downward movement of the trapdoor,the distribution of vertical earth pressure along the horizontal direction,the distribution of vertical earth pressure along the vertical direction,the distribution of lateral earth pressure coefficient along the depth direction,the magnitude and direction of contact force chain are studied,respectively.Related research results show that the earth pressure on the trapdoor decreases rapidly after the downward movement of the trapdoor,and then reaches the minimum earth pressure.After that,the earth’s pressure will rise slightly,and whether this phenomenon occurs depends on the depth ratio.For the bottom soil,due to the stress transfer caused by the soil arching effect,the ratio of earth pressure in the loose area decreases,while the ratio of earth pressure in the stable area increases.With the trapdoor moving down,the vertical earth pressure along the depth in the stable zone is basically consistent with the initial state,which shows an approximate linear distribution.After the trapdoor moves down,the distribution of earth pressure along with the depth in the loose area changes,which is far less than the theoretical value of vertical earth pressure of its self-weight.Because of the compression of the soil on both sides,the lateral earth pressure coefficient of most areas on the central axis of the loose zone is close to the passive earth pressure coefficient Kp.The existence of a‘soil arch’can be observed intuitively from the distribution diagram of the contact force chain in the loose zone.
基金Key Plan of Science and Technology of Hubei Provincial Communication Department(No.2005-361)
文摘The computation of the design load on culverts in the current Chinese General Code for Design of Highway Bridges and Culverts （CGCDHBC）is primarily based on the linear earth pressure theory, which cannot accurately reflect the changes in vertical loads on trench installation culverts. So the changes in vertical earth pressure and soil arching effect in the backfill for an unsymmetrical trench installation culvert are studied based on a full scale experiment and finite element （FE） simulation. The variation laws of foundation pressure and settlement are also analyzed. Meanwhile, the influence of eccentric load induced by an unsymmetrical trench installation on the interaction of a soil- structure system is discussed. Results show that soil arch is formed when the backfill on the culvert reaches a certain height. It can relieve the earth pressure concentration on the crest of the culvert, but it is instable. The earth pressures obtained by full scale experiment and numerical simulation are greater than those calculated by the current CGCDHBC method. The eccentric load effect on the culvert has a significant influence on the stress states and deformation of the soil-structure system.
基金the Natural Sciences and Engineering Research Council of Canada(NSERC)Institut de recherche Robert-Sauve en sante et en securite du travail(IRSST)industrial partners of the Research Institute on Mines and the Environment(RIME UQAT-Polytechnique)
文摘Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experimental results show that arching effect is absent shortly after the placement of CPB in stopes.However,stress decreases in barricade drift with increasing distance between the measurement points and drawpoint have also been observed,demonstrating arching effect shortly after the pouring of CPB.To explain these paradoxes,CPB is considered as Bingham fluid having a yield shear stress.Three dimensional analytical solutions are proposed to evaluate the short-term total stresses in backfilled stopes and on barricades,accounting for the CPB's yield shear stress-induced arching effect.Stress diminution due to such arching effect in the backfilled stopes and on barricades is indeed obtained.But the reduction becomes insignificant using typical yield shear stress and stope geometry.More analyses indicate that the typical yield shear stress values do not fully correspond to field conditions where the yield shear stress would increase exponentially due to apparent consolidation(loss of water by drainage,a phenomenon similar to the desiccation of overly saturated fine-grained materials).
文摘Wind speed forecasting is signif icant for wind farm planning and power grid operation. The research in this paper uses Eviews software to build the ARMA (autoregressive moving average) model of wind speed time series, and employs Lagrange multipliers to test the ARCH (autoregressive conditional heteroscedasticity) effects of the residuals of the ARMA model. Also, the corresponding ARMA-ARCH models are established, and the wind speed series are forecasted by using the ARMA model and ARMA-ARCH model respectively. The comparison of the forecasting accuracy of the above two models shows that the ARMA-ARCH model possesses higher forecasting accuracy than the ARMA model and has certain practical value.
基金supported by the National Natural Science Foundation of China(Grant No.41874067),the Innovative Funds Plan of Henan University of Technology(No.2022ZKCJ07)the Commonweal Technology Project of Jinhua City(No.2023-4-037).
文摘The consideration of unsaturated conditions is infrequently addressed in current Terzaghi’s soil arching research.A modified analytical method for calculation of unsaturated loosening earth pressure above shallow trapdoor is proposed in this paper.By assuming the existence of a vertical slip surface above the trapdoor,the stress state of the soil in the loosening area are delineated in the extended Mohr–Coulomb circle.To account for the non-uniform distribution of vertical stress at arbitrary points along the horizontal differential soil trip,a virtual rotation circle trajectory of major principal stress is employed.Subsequently,the average vertical stress acting on the soil trip is determined through integral approach.Taking into account the influence of matric suction on soil weight and apparent cohesion,the differential equation governing the soil trip is solved analytically for cases of uniform matric suction distribution and alternatively using the finite difference method for scenarios involving non-uniform matric suction distribution.The proposed method’s validity is confirmed through comparison with published results.The parameter analysis indicates that the loosening earth pressure initially decreases and subsequently increases with the increase of the soil saturation.With the rise of groundwater level,the normalized effective loosening earth pressure shows a decreasing trend.
基金the financial support provided by Natural Science Foundation of China(Grant Nos.51978019,52278382)Beijing Natural Science Foundation,China(Grant No.8222004).
文摘In order to investigate the influence of face instability for tunnels with different burial depths in sandy cobble strata on earth pressure and the instability region,geomechanical model tests and numerical simulations were performed.The continuous excavation method was adopted to reduce the pressure of the soil bin and restore the real engineering situation.Earth pressure in three directions of the obser-vation section in front of the tunnel face was monitored during the tunneling of the shield.Evolutions of the lateral stress ratios at dif-ferent stages were also investigated.The instability area of the shield tunnel face in sandy cobble strata with different burial depth ratios during the instability stage was obtained based on the change ratio of earth pressure and compared with existing researches.The earth pressure began to change when the excavation was one shield diameter away from the observation section,and when the excavation reached the observation section,the earth pressure decreased significantly.The burial depth of shield tunnel in the sandy cobble strata has a significant impact on the evolution of soil arch and the size of the failure area.The numerical simulation of the continuum medium cannot reflect the stress redistribution characteristics of the granular body like sandy cobble strata,and the failure area or stress distur-bance area obtained by the model test is larger than the numerical simulation result.Existing methods have deviations in analyzing the failure area of shield tunnel face in sandy cobble strata.It provides not only guidance for shield tunnel excavation engineering in sandy cobble strata,but also a reference for the theoretical research on failure areas.
基金funded by the National Nature Science Foundation of China(No.42207216)the National Major Scientific Instruments and Equipment Development Projects of China(No.41827808)the National Key Research and Development Program of China(No.2017YFC1501305)。
文摘A simplified geomechanical model was proposed by considering three typical neckingtype slopes;this model lays a foundation for the further investigation of the deformation behaviors of such slopes.Three physical models of necking-type slopes were built according to the geomechanical model with slope evolution stages.Finally,preliminary calculations related to the arching effect in the physical model were conducted.Three evolution stages of necking-type slopes,namely,the initial stage,compression stage,and failure stage,were presented based on the formation and disappearance of the arching effect within the slope.The specific parameters of the geomechanical model were given.In the setup of the tilting test,the failure angle of the necking-type slope model was calculated to be approximately 50°with a large lateral resistance coefficient.The proposed geomechanical model and physical models of necking-type slopes provide guidance for the establishment of geomechanical and physical models of landslides at specific sites.
基金The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China(Grant Nos.51978019 and 51978018)Natural Science Foundation of Beijing Municipality,China(Grant Nos.8222004 and 8222005).
文摘This paper focuses on theoretical analytical models to calculate the limit support pressure and vertical earth pressure on the cutting face for tunnels.The failure zone is divided into two parts:a sliding failure zone and an upper loosen zone,and the limit support pressure calculation equation is derived.To verify the rationality of the theoretical model,it was compared with the existing theory,numerical simulation,and centrifugal test,and then the parameter analysis was carried out.The results show that the results of this paper agree well with the existing theory,numerical simulation,and centrifugal test.The inclination angle of the proposed mechanism is determined based on the results of the existing centrifuge test,and the recommended inclination angle is between 52°+φ/2 and 54°+φ/2.The method is proven to be safe and accurate.It can provide a theoretical basis for similar projects.
