The dielectric properties and phase transition characteristics of La2O3- and Sb2O3-doped barium strontium titanate ceramics prepared by solid state route were investigated. The microstructure was identified by X-ray d...The dielectric properties and phase transition characteristics of La2O3- and Sb2O3-doped barium strontium titanate ceramics prepared by solid state route were investigated. The microstructure was identified by X-ray diffraction method and scanning electron microscope was also employed to observe the surface morphologies. It is found that (La,Sb)-codoped barium strontium titanate ceramics exhibit typical perovskite structure and the average grain size decreases dramatically with increasing the content of Sb2O3. Both La3+ ions and Sb3+ ions occupy the A-sites in perovskite lattice. The dielectric constant and dielectric loss of barium strontium titanate based ceramics are obviously influenced by La2O3 as well as Sb2O3 addition content. The tetragonal-cubic phase transition of La2O3 modified barium strontium titanate ceramics is of second order and the Curie temperature shifts to lower value with increasing the La2O3 doping content. The phase transition of (La,Sb)-codoped barium strontium titanate ceramics diffuses and the deviation from Curie-Weiss law becomes more obvious with the increase in Sb2O3 concentration. The temperature corresponding to the dielectric constant maximum of (La,Sb)-codoped barium strontium titanate ceramics decreases with increasing the Sb2O3 content, which is attributed to the replacement of host ions by the Sb3+ ions.展开更多
The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD a...The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD and LCR measure system.It is found that with the increase ofδ,(Ba0.75Sr0.25)Ti1-δO3-2δceramics transform from single phase solid solutions with typical cubic perovskite structure to multiphase compounds while(Ba0.75Sr0.25)Ti0.998O2.996ceramics remain to be single-phase with the increasing Sb2O3content.The distortion of the ABO3perovskite lattice caused by VTi″″and VO..induces the drop of Curie temperature and the rise of relative dielectric constant in(Ba0.75Sr0.25)Ti1-δO3-2δceramics with increasingδvalue.The orientation of VO??elastic dipoles results in the domain-wall pinning and thus the reduction of the dielectric loss.With increasing Sb2O3content,the relative dielectric constant,dielectric constant maximum and Curie temperature of(Ba0.75Sr0.25)Ti0.998O2.996ceramics decrease dramatically while the dielectric loss increases.展开更多
Barium strontium titanate (Ba0.5Sr0.5TiO3, BST)/silicon nanoporous pillar array (Si-NPA) thin films were prepared by a spin-coating/annealing technique based on Si-NPA with micro/nano-structure. Both the isomer co...Barium strontium titanate (Ba0.5Sr0.5TiO3, BST)/silicon nanoporous pillar array (Si-NPA) thin films were prepared by a spin-coating/annealing technique based on Si-NPA with micro/nano-structure. Both the isomer conversion of acetylacetone and the network structure combined by enol and Ti-alkoxide facilitate the formation of the BST sol and the subsequent crystallization. Before the perovskite BST begins to form, the intermediate phase (Ba, Sr)Ti2OsCO3 is found. The boundary between BST and Si-NPA is of clarity and little interface diffusion, disclosing that Si-NPA is an ideal template substrate in the preparation of multifunctional composite films.展开更多
Highly uniformed barium-strontium titanate nanotube arrays were fabricated using a porous anodic aluminum oxide template from a barium-strontium titanate sol-gel solution. Electron microscope results showed that nanot...Highly uniformed barium-strontium titanate nanotube arrays were fabricated using a porous anodic aluminum oxide template from a barium-strontium titanate sol-gel solution. Electron microscope results showed that nanotubes with uniform length and diameter were obtained. The diameters and lengths of these nanotubes were dependent on the pore diameter and the thickness of the applied anodic aluminum oxide template. High resolution transmission electron microscopy and the selected-area electron diffraction pattern investigations demonstrated the perovskite structure and the polycrystalline of the fabricated barium-strontium titanate nanotubes. The characterization of the electrical and dielectric properties had also been made. Compared to thin film material, the intrinsic leakage current density is almost the same. Besides, at 30 ℃ the dielectric constant and dielectric loss of the fabricated nanotube is 80 and 0.027 at 1 MHz respectively.展开更多
Reflectance and transmittance parameters of pulsed laser deposited barium strontium titanate (BST) were investigated using spectrophotometric methods. Three stoichiometries consisting of BaxSr1-xTiO3 (x = 0.30, 0.40, ...Reflectance and transmittance parameters of pulsed laser deposited barium strontium titanate (BST) were investigated using spectrophotometric methods. Three stoichiometries consisting of BaxSr1-xTiO3 (x = 0.30, 0.40, 0.50) were deposited on glass substrates using oxygen partial pressures of 1.3 Pa ± 0.13 Pa at 500oC. Subsequently, the measured optical parameters were employed to determine the refractive index (n), extinction coefficient (k), optical conductivity (σ), absorption coefficient (α) and optical bandgap (Eg) using swept spectra in the ultraviolet, visible and near-infrared range (200 nm - 1100 nm) as these have not been reported in the literature. The calculated parameters for Ba0.4Sr0.6TiO3 are reported in this experimental work. Minimal differences in the transmittance have been observed at the visible band edges when comparing each stoichiometry. Sharp cutoffs were observed at the bands edges and strong absorbance in the 200 nm - 300 nm band as attributed to the crystal structure based upon the oxygen partial pressure during the deposition process.展开更多
采用硝酸钡、硝酸锶、钛酸丁酯、正硅酸乙脂和硼酸三正丁脂为原料的溶胶凝胶方法制备了Si B O系BaxSr1-xTiO3玻璃陶瓷。通过差热分析(DTA)、热失重(TG)、X射线衍射(XRD)分析Si B O系BST玻璃陶瓷超细粉体合成过程及其相结构变化。采用... 采用硝酸钡、硝酸锶、钛酸丁酯、正硅酸乙脂和硼酸三正丁脂为原料的溶胶凝胶方法制备了Si B O系BaxSr1-xTiO3玻璃陶瓷。通过差热分析(DTA)、热失重(TG)、X射线衍射(XRD)分析Si B O系BST玻璃陶瓷超细粉体合成过程及其相结构变化。采用X射线衍射(XRD)、扫描电子显微镜(SEM)描述Si B O系BST玻璃陶瓷烧结体的相结构和显微组织结构变化。阻抗分析仪测量Si B O系BST玻璃陶瓷的-50~100℃介电温谱。实验结果表明:Si B O系BST玻璃陶瓷粉体的相结构为立方钙钛矿相结构,其合成温度为700℃,不存在第二相。Si B O系BST玻璃陶瓷的烧结温度低于传统工艺。Si B O系BST玻璃陶瓷的显微结构呈细晶结构。Si B O系BST玻璃陶瓷的介电常数ε随着烧结温度升高而增大,介电损耗tgδ随测试温度的增加而降低。随着晶粒平均尺寸的减小,Si B O系BST玻璃陶瓷样品的介电峰变低,平坦,宽化,存在介电峰弥散化的现象。展开更多
Reactive ion etching was used to etch barium strontium titanate thin films in a CHF3/Ar plasma.BST surfaces before and after etching were analyzed by X-ray photoelectron spectroscopy to investigate the reaction ion et...Reactive ion etching was used to etch barium strontium titanate thin films in a CHF3/Ar plasma.BST surfaces before and after etching were analyzed by X-ray photoelectron spectroscopy to investigate the reaction ion etching mechanism,and chemical reactions had occurred between the F plasma and the Ba,Sr and Ti metal species.Fluorides of these metals were formed and remained on the surface during the etching process.Ti was almost completely removed because the TiF4 by-product is volatile.Minor quantities of Ti?F could still be detected by narrow scan X-ray photoelectron spectra,and Ti?F was thought to be present in the form of a metal-oxy-fluoride.These species were investigated from O1s spectra,and a fluoride-rich surface was formed during etching.BaF2 and SrF2 residues were difficult to remove because of their high boiling point.The etching rate was limited to 12.86 nm/min.C?F polymers were not found on the surface,indicating that the removal of BaF2 and SrF2 was important for further etching.A 1-min Ar/15 plasma physical sputtering was carried out for every 4 min of surface etching,which effectively removed remaining surface residue.Sequential chemical reaction and sputtered etching is an effective etching method for barium strontium titanate films.展开更多
基金Project (11KJB430007) supported by the University Natural Science Research Program of Jiangsu Province, ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions, China
文摘The dielectric properties and phase transition characteristics of La2O3- and Sb2O3-doped barium strontium titanate ceramics prepared by solid state route were investigated. The microstructure was identified by X-ray diffraction method and scanning electron microscope was also employed to observe the surface morphologies. It is found that (La,Sb)-codoped barium strontium titanate ceramics exhibit typical perovskite structure and the average grain size decreases dramatically with increasing the content of Sb2O3. Both La3+ ions and Sb3+ ions occupy the A-sites in perovskite lattice. The dielectric constant and dielectric loss of barium strontium titanate based ceramics are obviously influenced by La2O3 as well as Sb2O3 addition content. The tetragonal-cubic phase transition of La2O3 modified barium strontium titanate ceramics is of second order and the Curie temperature shifts to lower value with increasing the La2O3 doping content. The phase transition of (La,Sb)-codoped barium strontium titanate ceramics diffuses and the deviation from Curie-Weiss law becomes more obvious with the increase in Sb2O3 concentration. The temperature corresponding to the dielectric constant maximum of (La,Sb)-codoped barium strontium titanate ceramics decreases with increasing the Sb2O3 content, which is attributed to the replacement of host ions by the Sb3+ ions.
基金Project(BK20140517)supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(14KJB430011)supported by Jiangsu Provincial Natural Science Foundation for Colleges and Universities,China
文摘The microstructures and dielectric properties of Sb2O3-doped Ti deficient barium strontium titanate ceramics prepared by solid state method were investigated with non-stoichiometric level and Sb2O3content by SEM,XRD and LCR measure system.It is found that with the increase ofδ,(Ba0.75Sr0.25)Ti1-δO3-2δceramics transform from single phase solid solutions with typical cubic perovskite structure to multiphase compounds while(Ba0.75Sr0.25)Ti0.998O2.996ceramics remain to be single-phase with the increasing Sb2O3content.The distortion of the ABO3perovskite lattice caused by VTi″″and VO..induces the drop of Curie temperature and the rise of relative dielectric constant in(Ba0.75Sr0.25)Ti1-δO3-2δceramics with increasingδvalue.The orientation of VO??elastic dipoles results in the domain-wall pinning and thus the reduction of the dielectric loss.With increasing Sb2O3content,the relative dielectric constant,dielectric constant maximum and Curie temperature of(Ba0.75Sr0.25)Ti0.998O2.996ceramics decrease dramatically while the dielectric loss increases.
基金supported by the Research Funds of Guangxi Key Laboratory of Information Materials, China (No.0710908-04-K)Guangxi Natural Science Fund, China (No.0832257)the Research Funds of Education Bureau of Guangxi Province, China (No.200708LX333)
文摘Barium strontium titanate (Ba0.5Sr0.5TiO3, BST)/silicon nanoporous pillar array (Si-NPA) thin films were prepared by a spin-coating/annealing technique based on Si-NPA with micro/nano-structure. Both the isomer conversion of acetylacetone and the network structure combined by enol and Ti-alkoxide facilitate the formation of the BST sol and the subsequent crystallization. Before the perovskite BST begins to form, the intermediate phase (Ba, Sr)Ti2OsCO3 is found. The boundary between BST and Si-NPA is of clarity and little interface diffusion, disclosing that Si-NPA is an ideal template substrate in the preparation of multifunctional composite films.
基金supported by the National Natural Science Foundation of China (Grant No 60244003)
文摘Highly uniformed barium-strontium titanate nanotube arrays were fabricated using a porous anodic aluminum oxide template from a barium-strontium titanate sol-gel solution. Electron microscope results showed that nanotubes with uniform length and diameter were obtained. The diameters and lengths of these nanotubes were dependent on the pore diameter and the thickness of the applied anodic aluminum oxide template. High resolution transmission electron microscopy and the selected-area electron diffraction pattern investigations demonstrated the perovskite structure and the polycrystalline of the fabricated barium-strontium titanate nanotubes. The characterization of the electrical and dielectric properties had also been made. Compared to thin film material, the intrinsic leakage current density is almost the same. Besides, at 30 ℃ the dielectric constant and dielectric loss of the fabricated nanotube is 80 and 0.027 at 1 MHz respectively.
文摘Reflectance and transmittance parameters of pulsed laser deposited barium strontium titanate (BST) were investigated using spectrophotometric methods. Three stoichiometries consisting of BaxSr1-xTiO3 (x = 0.30, 0.40, 0.50) were deposited on glass substrates using oxygen partial pressures of 1.3 Pa ± 0.13 Pa at 500oC. Subsequently, the measured optical parameters were employed to determine the refractive index (n), extinction coefficient (k), optical conductivity (σ), absorption coefficient (α) and optical bandgap (Eg) using swept spectra in the ultraviolet, visible and near-infrared range (200 nm - 1100 nm) as these have not been reported in the literature. The calculated parameters for Ba0.4Sr0.6TiO3 are reported in this experimental work. Minimal differences in the transmittance have been observed at the visible band edges when comparing each stoichiometry. Sharp cutoffs were observed at the bands edges and strong absorbance in the 200 nm - 300 nm band as attributed to the crystal structure based upon the oxygen partial pressure during the deposition process.
文摘 采用硝酸钡、硝酸锶、钛酸丁酯、正硅酸乙脂和硼酸三正丁脂为原料的溶胶凝胶方法制备了Si B O系BaxSr1-xTiO3玻璃陶瓷。通过差热分析(DTA)、热失重(TG)、X射线衍射(XRD)分析Si B O系BST玻璃陶瓷超细粉体合成过程及其相结构变化。采用X射线衍射(XRD)、扫描电子显微镜(SEM)描述Si B O系BST玻璃陶瓷烧结体的相结构和显微组织结构变化。阻抗分析仪测量Si B O系BST玻璃陶瓷的-50~100℃介电温谱。实验结果表明:Si B O系BST玻璃陶瓷粉体的相结构为立方钙钛矿相结构,其合成温度为700℃,不存在第二相。Si B O系BST玻璃陶瓷的烧结温度低于传统工艺。Si B O系BST玻璃陶瓷的显微结构呈细晶结构。Si B O系BST玻璃陶瓷的介电常数ε随着烧结温度升高而增大,介电损耗tgδ随测试温度的增加而降低。随着晶粒平均尺寸的减小,Si B O系BST玻璃陶瓷样品的介电峰变低,平坦,宽化,存在介电峰弥散化的现象。
基金supported by the University of Electronic Science and Technology of China (Y02002010301045)the Foundation of State Key Laboratory of Electronic Thin Films and Integrated Devices (kFJJ200909)
文摘Reactive ion etching was used to etch barium strontium titanate thin films in a CHF3/Ar plasma.BST surfaces before and after etching were analyzed by X-ray photoelectron spectroscopy to investigate the reaction ion etching mechanism,and chemical reactions had occurred between the F plasma and the Ba,Sr and Ti metal species.Fluorides of these metals were formed and remained on the surface during the etching process.Ti was almost completely removed because the TiF4 by-product is volatile.Minor quantities of Ti?F could still be detected by narrow scan X-ray photoelectron spectra,and Ti?F was thought to be present in the form of a metal-oxy-fluoride.These species were investigated from O1s spectra,and a fluoride-rich surface was formed during etching.BaF2 and SrF2 residues were difficult to remove because of their high boiling point.The etching rate was limited to 12.86 nm/min.C?F polymers were not found on the surface,indicating that the removal of BaF2 and SrF2 was important for further etching.A 1-min Ar/15 plasma physical sputtering was carried out for every 4 min of surface etching,which effectively removed remaining surface residue.Sequential chemical reaction and sputtered etching is an effective etching method for barium strontium titanate films.