With the continuous development of new energy generation technology and the increasingly complex power grid environment,the traditional black start scheme cannot meet the requirements of today’s power grid in order t...With the continuous development of new energy generation technology and the increasingly complex power grid environment,the traditional black start scheme cannot meet the requirements of today’s power grid in order to ensure the stable operation of the power system can be restored quickly in the face of large power outages,so a more complete black start scheme needs to be developed to cope with the new power system.With the development of energy storage technology,the limitations of the traditional black-start scheme can be solved by new energy farms with energy storage configuration.Therefore,this paper investigates the problems faced by black-start,the key technologies of energy storage assisted new energy black-start,and introduces the research related to new energy black-start technology to provide reference for future research and application of new energy black-start.展开更多
With the increasing deployment of renewable energy-based power generation plants,the power system is becoming increasingly vulnerable due to the intermittent nature of renewable energy,and a blackout can be the worst ...With the increasing deployment of renewable energy-based power generation plants,the power system is becoming increasingly vulnerable due to the intermittent nature of renewable energy,and a blackout can be the worst scenario.The current auxiliary generators must be upgraded to energy sources with substantially high power and storage capacity,a short response time,good profitability,and minimal environmental concern.Difficulties in the power restoration of renewable energy generators should also be addressed.The different energy storage methods can store and release electrical/thermal/mechanical energy and provide flexibility and stability to the power system.Herein,a review of the use of energy storage methods for black start services is provided,for which little has been discussed in the literature.First,the challenges that impede a stable,environmentally friendly,and cost-effective energy storage-based black start are identified.The energy storagebased black start service may lack supply resilience.Second,the typical energy storage-based black start service,including explanations on its steps and configurations,is introduced.Black start services with different energy storage technologies,including electrochemical,thermal,and electromechanical resources,are compared.Results suggest that hybridization of energy storage technologies should be developed,which mitigates the disadvantages of individual energy storage methods,considering the deployment of energy storage-based black start services.展开更多
The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as h...The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as high as ten times its rated current. This could cause many problems from mechanical stress on transformer windings to harmonics injection, and system protection malfunction. There have been numerous researches focusing on calculation and mitigation of the transformer inrush current. With the development of smart grid, distributed generation from independent power producers (IPPs) is growing rapidly. This paper investigates the inrush current due to black start of an IPP system with several parallel transformers, through a simulation model in DIgSILENT Power Factory software. The study demonstrates that a single genset is capable of energizing a group of transformers since the overall inrush current is slightly above the inrush of the transformer directly connected to the generator. In addition, a simple method is proposed to mitigate the inrush current of the transformers using an auxiliary transformer.展开更多
The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development o...The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development of real-time communication networks,the black-start decision-makers are no longer limited to only one or a few power system experts such as dispatchers,but rather a large group of professional people in practice.The overall behaviors of a large decision-making group of decision-makers/experts are more complicated and unpredictable.However,the existing methods for black-start decision-making cannot handle the situations with a large group of decision-makers.Given this background,a clustering algorithm is presented to optimize the black-start decision-making problem with a large group of decision-makers.Group decision-making preferences are obtained by clustering analysis,and the final black-start decision-making results are achieved by combining the weights of black-start indexes and the preferences of the decision-making group.The effectiveness of the proposed method is validated by a practical case.This work extends the black-start decision-making problem to situations with a large group of decision-makers.展开更多
On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions ...On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions for parallel recovery. On the basis of adequate consideration of fuzziness of black-start zone partitioning, a new algorithm based on fuzzy clustering analysis is presented. Characteristic indexes are extracted fully and accurately. The raw data matrix is made up of the electrical distance between every nodes and blackstart resources. Closure transfer method is utilized to get the dynamic clustering. The availability and feasibility of the proposed algorithm are verified on the New-England 39 bus system at last.展开更多
液流电池具有充放电循环次数大、容量高及寿命长等优点,是长时大规模储能的理想选择,但是其复杂的结构对电池控制系统的要求较高,传统开发方式难以满足其多样的控制需求,因此提出精准度更高、实时性更好的基于事件驱动技术的液流电池控...液流电池具有充放电循环次数大、容量高及寿命长等优点,是长时大规模储能的理想选择,但是其复杂的结构对电池控制系统的要求较高,传统开发方式难以满足其多样的控制需求,因此提出精准度更高、实时性更好的基于事件驱动技术的液流电池控制系统开发方法。首先针对液流电池稳定性需求高、内部损耗大等问题,提出了主/辅助电堆协同架构,并对该架构系统进行建模分析;然后基于事件驱动技术对控制系统进行模块化设计,包括柔性充放电控制、辅助电堆参与的黑启动控制、基于卡尔曼滤波的电池荷电状态(state of charge,SOC)估计等;最后搭建半实物仿真平台,对所提架构和策略进行验证,证明了该架构和策略能提高系统的能量转换效率和稳定性。展开更多
故障场景下,软开关(soft open points,SOP)的电压支撑和负荷转供作用能有效改善配电系统中的恢复性能。为了提高互联配电系统在极端事件下的运行灵活性和供电可靠性,该文建立含多端软开关的互联配电系统故障恢复的优化决策方法。具体地...故障场景下,软开关(soft open points,SOP)的电压支撑和负荷转供作用能有效改善配电系统中的恢复性能。为了提高互联配电系统在极端事件下的运行灵活性和供电可靠性,该文建立含多端软开关的互联配电系统故障恢复的优化决策方法。具体地,对互联配电网中的多端SOP、分布式电源、储能和冷负荷启动过程进行建模,分析SOP各个端口在恢复过程中的控制模式,并探讨互联配电系统恢复过程中线路拓扑变化和电气装置动作之间的联系,从而实现对系统内可控装置动作顺序的优化决策。之后以负荷恢复量最大、系统总损耗最小为目标,构建互联配电网的故障恢复模型。在原模型基础上进行二阶锥松弛和逻辑约束线性化,并对转化成的混合整数二阶锥规划模型进行求解。最后,以5端SOP连接IEEE33节点和IEEE69节点的系统为算例,验证所述恢复方法的有效性。展开更多
基金Supported by Joint Foundation of Natural Science Foundation of Jilin Province(No.YDZJ202101ZYTS152).
文摘With the continuous development of new energy generation technology and the increasingly complex power grid environment,the traditional black start scheme cannot meet the requirements of today’s power grid in order to ensure the stable operation of the power system can be restored quickly in the face of large power outages,so a more complete black start scheme needs to be developed to cope with the new power system.With the development of energy storage technology,the limitations of the traditional black-start scheme can be solved by new energy farms with energy storage configuration.Therefore,this paper investigates the problems faced by black-start,the key technologies of energy storage assisted new energy black-start,and introduces the research related to new energy black-start technology to provide reference for future research and application of new energy black-start.
基金financially supported by the UK Engineering and Physical Sciences Research Council(Nos.EP/S001905/1,EP/S032622/1,and EP/N032888/1)the Jiangsu Provincial Department of Science and Technology,China(Nos.BZ2019071 and BZ2020076)。
文摘With the increasing deployment of renewable energy-based power generation plants,the power system is becoming increasingly vulnerable due to the intermittent nature of renewable energy,and a blackout can be the worst scenario.The current auxiliary generators must be upgraded to energy sources with substantially high power and storage capacity,a short response time,good profitability,and minimal environmental concern.Difficulties in the power restoration of renewable energy generators should also be addressed.The different energy storage methods can store and release electrical/thermal/mechanical energy and provide flexibility and stability to the power system.Herein,a review of the use of energy storage methods for black start services is provided,for which little has been discussed in the literature.First,the challenges that impede a stable,environmentally friendly,and cost-effective energy storage-based black start are identified.The energy storagebased black start service may lack supply resilience.Second,the typical energy storage-based black start service,including explanations on its steps and configurations,is introduced.Black start services with different energy storage technologies,including electrochemical,thermal,and electromechanical resources,are compared.Results suggest that hybridization of energy storage technologies should be developed,which mitigates the disadvantages of individual energy storage methods,considering the deployment of energy storage-based black start services.
文摘The energizing of large power transformers has long been considered a critical event in the operation of an electric power system. When a transformer is energized by the utility, a typical inrush current could be as high as ten times its rated current. This could cause many problems from mechanical stress on transformer windings to harmonics injection, and system protection malfunction. There have been numerous researches focusing on calculation and mitigation of the transformer inrush current. With the development of smart grid, distributed generation from independent power producers (IPPs) is growing rapidly. This paper investigates the inrush current due to black start of an IPP system with several parallel transformers, through a simulation model in DIgSILENT Power Factory software. The study demonstrates that a single genset is capable of energizing a group of transformers since the overall inrush current is slightly above the inrush of the transformer directly connected to the generator. In addition, a simple method is proposed to mitigate the inrush current of the transformers using an auxiliary transformer.
基金supported by National Natural Science Foundation of China (No.51007080)National High Technology Research and Development Program of China (863 Program) (No.2011AA05A105)+1 种基金the Fundamental Research Funds for the Central Universities (No.2012QNA4011)key project from Zhejiang Electric Power Corporation
文摘The optimization of black-start decision-making plays an important role in the rapid restoration of a power system after a major failure/outage.With the introduction of the concept of smart grids and the development of real-time communication networks,the black-start decision-makers are no longer limited to only one or a few power system experts such as dispatchers,but rather a large group of professional people in practice.The overall behaviors of a large decision-making group of decision-makers/experts are more complicated and unpredictable.However,the existing methods for black-start decision-making cannot handle the situations with a large group of decision-makers.Given this background,a clustering algorithm is presented to optimize the black-start decision-making problem with a large group of decision-makers.Group decision-making preferences are obtained by clustering analysis,and the final black-start decision-making results are achieved by combining the weights of black-start indexes and the preferences of the decision-making group.The effectiveness of the proposed method is validated by a practical case.This work extends the black-start decision-making problem to situations with a large group of decision-makers.
文摘On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions for parallel recovery. On the basis of adequate consideration of fuzziness of black-start zone partitioning, a new algorithm based on fuzzy clustering analysis is presented. Characteristic indexes are extracted fully and accurately. The raw data matrix is made up of the electrical distance between every nodes and blackstart resources. Closure transfer method is utilized to get the dynamic clustering. The availability and feasibility of the proposed algorithm are verified on the New-England 39 bus system at last.
文摘液流电池具有充放电循环次数大、容量高及寿命长等优点,是长时大规模储能的理想选择,但是其复杂的结构对电池控制系统的要求较高,传统开发方式难以满足其多样的控制需求,因此提出精准度更高、实时性更好的基于事件驱动技术的液流电池控制系统开发方法。首先针对液流电池稳定性需求高、内部损耗大等问题,提出了主/辅助电堆协同架构,并对该架构系统进行建模分析;然后基于事件驱动技术对控制系统进行模块化设计,包括柔性充放电控制、辅助电堆参与的黑启动控制、基于卡尔曼滤波的电池荷电状态(state of charge,SOC)估计等;最后搭建半实物仿真平台,对所提架构和策略进行验证,证明了该架构和策略能提高系统的能量转换效率和稳定性。
文摘故障场景下,软开关(soft open points,SOP)的电压支撑和负荷转供作用能有效改善配电系统中的恢复性能。为了提高互联配电系统在极端事件下的运行灵活性和供电可靠性,该文建立含多端软开关的互联配电系统故障恢复的优化决策方法。具体地,对互联配电网中的多端SOP、分布式电源、储能和冷负荷启动过程进行建模,分析SOP各个端口在恢复过程中的控制模式,并探讨互联配电系统恢复过程中线路拓扑变化和电气装置动作之间的联系,从而实现对系统内可控装置动作顺序的优化决策。之后以负荷恢复量最大、系统总损耗最小为目标,构建互联配电网的故障恢复模型。在原模型基础上进行二阶锥松弛和逻辑约束线性化,并对转化成的混合整数二阶锥规划模型进行求解。最后,以5端SOP连接IEEE33节点和IEEE69节点的系统为算例,验证所述恢复方法的有效性。
文摘针对黑启动过程中的功率协调问题,基于模型预测控制(model predictive control,MPC)提出一种优化策略。首先,介绍了风储发电系统作黑启动电源,设计了风储发电系统的出力方式;其次,结合MPC策略设定了风储出力优化策略,构建风储系统预测模型和滚动优化模型;最后,通过算例对不同功率协调优化策略分析,得出所提风储发电系统功率协调优化策略可以使风电出力有效跟踪火电厂辅机负荷,减小黑启动过程中储能系统的输出功率,进而使储能荷电状态(state of charge,SOC)维持在理想值附近,防止储能SOC越限。
