The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specifi...The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.展开更多
The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and ...The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and the work method. The samples of Wool/PET blended fibre bundles, the method of fibre-bundle tensile tests and the typical specific stress-extension curves from the fibre bundles with different blend ratios are the same as in Part Ⅰ. It can be found that the theoretical results estimated by the modulus and percentage methods accord with the experimental values highly though the calculations of the two methods are slightly more complex than those of the strength and work methods. Especially, using the modulus method can not only avoid the influence of the error caused by the determination of the tensile curve of no fibre breaking in stretching, Y(e), but also need not to know the tensile curves of mono-component fibre bundles in certain calculation. The latter advantage of the modulus method exists in the percentage method too, but it should adopt the improved calculation of ones.展开更多
The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the freque...The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the frequency-function calculation of the definition method are defined and developed in detail. Meanwhile, the procedures to find the tensile parameters are analysed experimentally and involve “ED” being the average values of the corresponding tensile parameters of each bundle tensile curve measured; “EC” being the tensile parameters obtained from the averaged experimental tensile curve; and “TC” being the parameters of the theoretical tensile curve according to the corresponding nominal blend ratio. The theoretical and experimental results indicate that the blend ratio estimated by the definition method from wool/polyester blended fibre bundles has a high correlation with the actual blend ratio though the variables to be known in this method are the most of all the methods and there exist the difficulty to solve fibre bundle tensile behaviour without fibre broken in accuracy and that there are high correlations between the EC and TC data and the tensile parameters should be calculated using the EC method rather than the ED method with the exception of the bundle initial modulus. The relationships between blend ratios and the tensile properties of blended fibre bundles can be used to select the optimum blend ratio of blended tops or yarns.展开更多
The effects of blend ratio on combustion and pollution emission characteristics for co-combustion of Shenmu pyrolyzed semi-char (SC), i.e., residuals of the coal pyrolysis chemical processing, and Shenhua bituminous c...The effects of blend ratio on combustion and pollution emission characteristics for co-combustion of Shenmu pyrolyzed semi-char (SC), i.e., residuals of the coal pyrolysis chemical processing, and Shenhua bituminous coal (SB) were investigated in a 0.35 MW pilot-scale pulverized coal-fired furnace. The gas temperature and concentrations of gaseous species (O2, CO, CO_(2), NO_(x) and HCN) were measured in the primary combustion zone at different blend ratios. It is found that the standoff distance of ignition changes monotonically from 132 to 384 mm with the increase in pyrolyzed semi-char blend ratio. The effects on the combustion characteristics may be neglected when the blend ratio is less than 30%. Above the 30% blend ratio, the increase in blend ratio postpones ignition in the primary stage and lowers the burnout rate. With the blend ratio increasing, NO_(x) emission at the furnace exit is smallest for the 30% blend ratio and highest for the 100% SC. The NO_(x) concentration was 425 mg/m^(3) at 6% O_(2) and char burnout was 76.23% for the 45% blend ratio. The above results indicate that the change of standoff distance and NO_(x) emission were not obvious when the blend ratio of semi-char is less than 45%, and carbon burnout changed a little at all blend ratios. The goal of this study is to achieve blending combustion with a large proportion of semi-char without great changes in combustion characteristics. So, an SC blend ratio of no more than 45% can be suitable for the burning of semi-char.展开更多
A microscope method was developed for testing the blending ratio of akund/cotton blended yarns. Fiber characteristics such as diameter, longitudinal feature, and hollow structure were observed to identify akund and co...A microscope method was developed for testing the blending ratio of akund/cotton blended yarns. Fiber characteristics such as diameter, longitudinal feature, and hollow structure were observed to identify akund and cotton. Therefore, the measurement of the blending ratio for akund/cotton blended yarns based on each fiber's amount, moisture regain, and metric count was available. The results show that using specimen's longitudinal section is more effective during the fiber counting than specimen's transverse section benefiting from the separation of the fibers.展开更多
A 600 MW coal-fired boiler with a four-corner tangential combustion mode is considered here to study the combustion features and pollutant emissions at different loads for large-percentages of blending dried sludges.T...A 600 MW coal-fired boiler with a four-corner tangential combustion mode is considered here to study the combustion features and pollutant emissions at different loads for large-percentages of blending dried sludges.The influence of the over-fired air(OFA)coefficient is examined and the impact of the blending ratio on the boiler operation is explored.The results show that for low blending ratios,a slight increase in the blending ratio can improve the combustion of bituminite,whereas a further increase leads to the deterioration of the combustion of blended fuels and thus reduces the boiler efficiency.Enhancing the supporting capability of the secondary air effectively reduces the slagging degree in the bottom ash hopper and improves the burnout rate of coals.For a large-percentage blending case at full load,it is found that the OFA coefficient must be reduced appropriately,otherwise,a secondary high-temperature combustion zone can be generated in the vicinity of the furnace arches,causing high temperature slagging and superheater tube bursting.Considering the influences of combustion and pollutant emissions,the recommended OFA coefficient is 0.2.Blending dried sludge under low loads increases the flue gas temperature at the furnace exit.While reducing the flue gas temperature in the main combustion region,which is beneficial to the safe operation of the denitrification system.Increasing the blending ratio and reducing load lead to an increase in NOx concentration at the furnace exit Sludges with low nitrogen content are suggested for the practical operation of boilers.展开更多
The hydration process,hydration product and hydration heat of blended cement paste mixed with mineral admixture and expansive agent at low W/B ratio are studied by XRD,thermo analysis,and calorimetry instrument,and th...The hydration process,hydration product and hydration heat of blended cement paste mixed with mineral admixture and expansive agent at low W/B ratio are studied by XRD,thermo analysis,and calorimetry instrument,and they were compared with those of pure cement paste.The results show that pure cement and blended cement at low W/B ratio have the same types of hydration products,but their respective amounts of hydration products of various blended cements at same ages and the variation law of the amount of same hydration products with ages are different;The joint effect of tumefaction of gel-ettringite due to water absorption and the expansive pressure on the pore and rift caused by the crystalloid ettringite is the impetus of the volume expansion of cement paste,and the former effect is much greater than the latter one.展开更多
The composition ratio of donor and acceptor materials in organic bulk heterojunction (BHJ) is one of the key parameters to govern the performance in organic solar cells (OSCs). Therefore, high-performance non-fulleren...The composition ratio of donor and acceptor materials in organic bulk heterojunction (BHJ) is one of the key parameters to govern the performance in organic solar cells (OSCs). Therefore, high-performance non-fullerene organic bulk heterojunction consisting of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b' ]dithiophene))-co-(1,3-di(5-thiophene-2-yl)–5,7-bis(2-ethylhexyl) benzo[1,2-c:4,5-c']dithiophene-4,8-dione)] (PBDB-T) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))–5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2' ,3'-d' ]-s-indaceno[1,2-b:5,6-b' ]-dithio-phene (ITIC) are used to investigate the correlation among various donor: acceptor (D:A) ratios, photophysical properties and photovoltaic performance. Interestingly, the function of short-circuit current (Jsc) and D:A ratios demonstrates an axisymmetric trend. When the blending ratio of D:A deviates from the optimal ratio, the symmetrically decreased Jsc is derived from a reduction in the D:A interface or amorphous region. Research on the steady-state photoluminescence (PL), the time-resolved fluorescence spectroscopy measurements, atomic force microscopic (AFM) and grazing-incidence small angle X-rays scattering (GIWAXS) indicates no significant variation in energy loss in the process of changing D:A ratios in BHJs. With high donor or acceptor content, the domain size improves significantly, but the distance of π-π stacking corresponding to molecular packing has not changed significantly, and the bi-continuous percolation pathways were not obviously influenced.展开更多
The effects of the blending ratio on the properties of Ramie/Polyester blended yarns are discussed in this paper. The experimental results show that the elongation of the yarn with the polyester content more than 40% ...The effects of the blending ratio on the properties of Ramie/Polyester blended yarns are discussed in this paper. The experimental results show that the elongation of the yarn with the polyester content more than 40% is better than that of others. There is a lowest tenacity of the yarn corresponding to the blending ratio of 50/50 or so. The other properties of the yarn, such as the evenness and hairiness, will be improved with the increasing of the polyester content.展开更多
In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data wa...In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.展开更多
The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysi...The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.展开更多
文摘The blend ratio and tensile properties are vital important characteristics of blended fibre bundles. Fibre-bundle tensile behaviour has been measured by means of the Sirolan-Tensor in order to derive a typical specific stress — extension curve. According to the typical tensile curve, the relationships between the blend ratio and the tensile parameters are discussed and established. Two new algorithms, so-called the strength method and the work method, have been developed for the blend-ratio estimation of blended fibre bundles. The relevant blend-ratios and calculations of the two methods are defined in detail. Also, the characteristics have been explained for every calculation and compared to each others. The experimental results show that the blend ratios estimated from the theoretical methods are high coincidence with the measured results. Meanwhile, the specific stress — extension curve of blended fibre bundles depends directly on the blend ratios of the fibre bundles.
文摘The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and the work method. The samples of Wool/PET blended fibre bundles, the method of fibre-bundle tensile tests and the typical specific stress-extension curves from the fibre bundles with different blend ratios are the same as in Part Ⅰ. It can be found that the theoretical results estimated by the modulus and percentage methods accord with the experimental values highly though the calculations of the two methods are slightly more complex than those of the strength and work methods. Especially, using the modulus method can not only avoid the influence of the error caused by the determination of the tensile curve of no fibre breaking in stretching, Y(e), but also need not to know the tensile curves of mono-component fibre bundles in certain calculation. The latter advantage of the modulus method exists in the percentage method too, but it should adopt the improved calculation of ones.
文摘The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the frequency-function calculation of the definition method are defined and developed in detail. Meanwhile, the procedures to find the tensile parameters are analysed experimentally and involve “ED” being the average values of the corresponding tensile parameters of each bundle tensile curve measured; “EC” being the tensile parameters obtained from the averaged experimental tensile curve; and “TC” being the parameters of the theoretical tensile curve according to the corresponding nominal blend ratio. The theoretical and experimental results indicate that the blend ratio estimated by the definition method from wool/polyester blended fibre bundles has a high correlation with the actual blend ratio though the variables to be known in this method are the most of all the methods and there exist the difficulty to solve fibre bundle tensile behaviour without fibre broken in accuracy and that there are high correlations between the EC and TC data and the tensile parameters should be calculated using the EC method rather than the ED method with the exception of the bundle initial modulus. The relationships between blend ratios and the tensile properties of blended fibre bundles can be used to select the optimum blend ratio of blended tops or yarns.
基金This work was supported by the National Key R&D Program of China(No.2017YFB0602002).
文摘The effects of blend ratio on combustion and pollution emission characteristics for co-combustion of Shenmu pyrolyzed semi-char (SC), i.e., residuals of the coal pyrolysis chemical processing, and Shenhua bituminous coal (SB) were investigated in a 0.35 MW pilot-scale pulverized coal-fired furnace. The gas temperature and concentrations of gaseous species (O2, CO, CO_(2), NO_(x) and HCN) were measured in the primary combustion zone at different blend ratios. It is found that the standoff distance of ignition changes monotonically from 132 to 384 mm with the increase in pyrolyzed semi-char blend ratio. The effects on the combustion characteristics may be neglected when the blend ratio is less than 30%. Above the 30% blend ratio, the increase in blend ratio postpones ignition in the primary stage and lowers the burnout rate. With the blend ratio increasing, NO_(x) emission at the furnace exit is smallest for the 30% blend ratio and highest for the 100% SC. The NO_(x) concentration was 425 mg/m^(3) at 6% O_(2) and char burnout was 76.23% for the 45% blend ratio. The above results indicate that the change of standoff distance and NO_(x) emission were not obvious when the blend ratio of semi-char is less than 45%, and carbon burnout changed a little at all blend ratios. The goal of this study is to achieve blending combustion with a large proportion of semi-char without great changes in combustion characteristics. So, an SC blend ratio of no more than 45% can be suitable for the burning of semi-char.
文摘A microscope method was developed for testing the blending ratio of akund/cotton blended yarns. Fiber characteristics such as diameter, longitudinal feature, and hollow structure were observed to identify akund and cotton. Therefore, the measurement of the blending ratio for akund/cotton blended yarns based on each fiber's amount, moisture regain, and metric count was available. The results show that using specimen's longitudinal section is more effective during the fiber counting than specimen's transverse section benefiting from the separation of the fibers.
文摘A 600 MW coal-fired boiler with a four-corner tangential combustion mode is considered here to study the combustion features and pollutant emissions at different loads for large-percentages of blending dried sludges.The influence of the over-fired air(OFA)coefficient is examined and the impact of the blending ratio on the boiler operation is explored.The results show that for low blending ratios,a slight increase in the blending ratio can improve the combustion of bituminite,whereas a further increase leads to the deterioration of the combustion of blended fuels and thus reduces the boiler efficiency.Enhancing the supporting capability of the secondary air effectively reduces the slagging degree in the bottom ash hopper and improves the burnout rate of coals.For a large-percentage blending case at full load,it is found that the OFA coefficient must be reduced appropriately,otherwise,a secondary high-temperature combustion zone can be generated in the vicinity of the furnace arches,causing high temperature slagging and superheater tube bursting.Considering the influences of combustion and pollutant emissions,the recommended OFA coefficient is 0.2.Blending dried sludge under low loads increases the flue gas temperature at the furnace exit.While reducing the flue gas temperature in the main combustion region,which is beneficial to the safe operation of the denitrification system.Increasing the blending ratio and reducing load lead to an increase in NOx concentration at the furnace exit Sludges with low nitrogen content are suggested for the practical operation of boilers.
文摘The hydration process,hydration product and hydration heat of blended cement paste mixed with mineral admixture and expansive agent at low W/B ratio are studied by XRD,thermo analysis,and calorimetry instrument,and they were compared with those of pure cement paste.The results show that pure cement and blended cement at low W/B ratio have the same types of hydration products,but their respective amounts of hydration products of various blended cements at same ages and the variation law of the amount of same hydration products with ages are different;The joint effect of tumefaction of gel-ettringite due to water absorption and the expansive pressure on the pore and rift caused by the crystalloid ettringite is the impetus of the volume expansion of cement paste,and the former effect is much greater than the latter one.
基金supported by the National Natural Science Foundation of China(Nos.61631166001,11574181,11774204)Key R&D Programs of Shandong Province,China(No.2018GGX103004)support from the ARC Centre of Excellence in Exciton Science(No.CE170100026)
文摘The composition ratio of donor and acceptor materials in organic bulk heterojunction (BHJ) is one of the key parameters to govern the performance in organic solar cells (OSCs). Therefore, high-performance non-fullerene organic bulk heterojunction consisting of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b' ]dithiophene))-co-(1,3-di(5-thiophene-2-yl)–5,7-bis(2-ethylhexyl) benzo[1,2-c:4,5-c']dithiophene-4,8-dione)] (PBDB-T) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))–5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2' ,3'-d' ]-s-indaceno[1,2-b:5,6-b' ]-dithio-phene (ITIC) are used to investigate the correlation among various donor: acceptor (D:A) ratios, photophysical properties and photovoltaic performance. Interestingly, the function of short-circuit current (Jsc) and D:A ratios demonstrates an axisymmetric trend. When the blending ratio of D:A deviates from the optimal ratio, the symmetrically decreased Jsc is derived from a reduction in the D:A interface or amorphous region. Research on the steady-state photoluminescence (PL), the time-resolved fluorescence spectroscopy measurements, atomic force microscopic (AFM) and grazing-incidence small angle X-rays scattering (GIWAXS) indicates no significant variation in energy loss in the process of changing D:A ratios in BHJs. With high donor or acceptor content, the domain size improves significantly, but the distance of π-π stacking corresponding to molecular packing has not changed significantly, and the bi-continuous percolation pathways were not obviously influenced.
文摘The effects of the blending ratio on the properties of Ramie/Polyester blended yarns are discussed in this paper. The experimental results show that the elongation of the yarn with the polyester content more than 40% is better than that of others. There is a lowest tenacity of the yarn corresponding to the blending ratio of 50/50 or so. The other properties of the yarn, such as the evenness and hairiness, will be improved with the increasing of the polyester content.
文摘In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.
文摘The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.
