The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with ...The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.展开更多
The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. T...The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. The diffusion operation is controlled by four factors including approximation, closing, length-limiting, and hit-rate. Based on this model, three shape indices, i. e., dimension index, abnormity index, and fluctuation index, were put forward to describe the shape of objects. The rule of shape indices selection was discussed subsequently. Finally, the fibers in polyester/cotton blended yam are classified and the blending ratio is determined.展开更多
This paper studies rotor spinning blended yam produced of spun silk and cashmere. Nine samples were spun, from three different opening rollers and different navels. According to the Uster test results of yam quality p...This paper studies rotor spinning blended yam produced of spun silk and cashmere. Nine samples were spun, from three different opening rollers and different navels. According to the Uster test results of yam quality properties, optimum selection is done by using analysis method of combining fuzzy decision-making and fuzzy pattern classification. Experimental plan is designed based on universal rotated experimental design, and the method of confined optimization is used to optimize the speed of opening roller, the speed of rotor and twist factor, according to the results of yam quality test by Uster.展开更多
According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the...According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the theoretical fibre distribution and the actual fibre distribution is analyzed by use of electron microscope.展开更多
Pressure applied on the top roller of drafting zone is a vital factor on which the quality of ultimate yarn depends. Drafting zone is needed to reduce the mass per unit length of input material. Appropriate contact of...Pressure applied on the top roller of drafting zone is a vital factor on which the quality of ultimate yarn depends. Drafting zone is needed to reduce the mass per unit length of input material. Appropriate contact of top rollers with bottom rollers is necessary to ensure proper drafting. In this paper, the effects of different front top roller pressure of drafting zone on the quality of 20Ne cotton-flax blended yarns (C:L = 45:55) were studied. It was observed that a higher pressure value gives a lower co-efficient of mass variation, imperfections, hairiness and higher evenness, tenacity, elongation properties.展开更多
Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has holl...Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.展开更多
基金National Key Technologies R&D Programof China (No.2007BAE41B01)
文摘The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.
文摘The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. The diffusion operation is controlled by four factors including approximation, closing, length-limiting, and hit-rate. Based on this model, three shape indices, i. e., dimension index, abnormity index, and fluctuation index, were put forward to describe the shape of objects. The rule of shape indices selection was discussed subsequently. Finally, the fibers in polyester/cotton blended yam are classified and the blending ratio is determined.
文摘This paper studies rotor spinning blended yam produced of spun silk and cashmere. Nine samples were spun, from three different opening rollers and different navels. According to the Uster test results of yam quality properties, optimum selection is done by using analysis method of combining fuzzy decision-making and fuzzy pattern classification. Experimental plan is designed based on universal rotated experimental design, and the method of confined optimization is used to optimize the speed of opening roller, the speed of rotor and twist factor, according to the results of yam quality test by Uster.
文摘According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the theoretical fibre distribution and the actual fibre distribution is analyzed by use of electron microscope.
文摘Pressure applied on the top roller of drafting zone is a vital factor on which the quality of ultimate yarn depends. Drafting zone is needed to reduce the mass per unit length of input material. Appropriate contact of top rollers with bottom rollers is necessary to ensure proper drafting. In this paper, the effects of different front top roller pressure of drafting zone on the quality of 20Ne cotton-flax blended yarns (C:L = 45:55) were studied. It was observed that a higher pressure value gives a lower co-efficient of mass variation, imperfections, hairiness and higher evenness, tenacity, elongation properties.
基金Technical Standards for the Development of Kinitted Jinlong Underw ear Factory of Guangdong Province,China(No.HX201303000008)
文摘Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.
