Metal-organic frameworks(MOFs)have been developed as an ideal platform for exploration of the relationship between intrinsic structure and catalytic activity,but the limited catalytic activity and stability has hamper...Metal-organic frameworks(MOFs)have been developed as an ideal platform for exploration of the relationship between intrinsic structure and catalytic activity,but the limited catalytic activity and stability has hampered their practical use in water splitting.Herein,we develop a bond length adjustment strategy for optimizing naphthalene-based MOFs that synthesized by acid etching Co-naphthalenedicarboxylic acid-based MOFs(donated as AE-CoNDA)to serve as efficient catalyst for water splitting.AE-CoNDA exhibits a low overpotential of 260 mV to reach 10 mA cm^(−2)and a small Tafel slope of 62 mV dec^(−1)with excellent stability over 100 h.After integrated AE-CoNDA onto BiVO_(4),photocurrent density of 4.3 mA cm^(−2)is achieved at 1.23 V.Experimental investigations demonstrate that the stretched Co-O bond length was found to optimize the orbitals hybridization of Co 3d and O 2p,which accounts for the fast kinetics and high activity.Theoretical calculations reveal that the stretched Co-O bond length strengthens the adsorption of oxygen-contained intermediates at the Co active sites for highly efficient water splitting.展开更多
Rotational isomerism effects on the optical spectra of a push-pull nonlinear optical chro-mophore 2-dicyanomethylen-3-cyano-4-f2-[E-(4-N,N-di(2-acetoxyethyl)-amino)-phenylene-(3,4-dibutyl)-thien-5]-E-vinylg-5,5-...Rotational isomerism effects on the optical spectra of a push-pull nonlinear optical chro-mophore 2-dicyanomethylen-3-cyano-4-f2-[E-(4-N,N-di(2-acetoxyethyl)-amino)-phenylene-(3,4-dibutyl)-thien-5]-E-vinylg-5,5-dimethyl-2,5-dihydrofuran (FTC) in a few solvents have been studied using the time-dependent density functional theory in combination with the polarizable continuum model. It is shown that the maximum absorption peaks of the ro-tamers have difference of nearly 30 nm both in vacuum and in solutions. The population of the rotamers changes a lot in different solvents. Based on the geometries optimized by Hartree-Fock method, the Maxwell-Boltzmann averaged absorption has been calculated and the maximum absorption peak is in good agreement with experiment. It indicates that the bond length alternation can have an important effect on the optical spectra.展开更多
The bond length of ^4HeH^+ resulting from collision-induced destruction is measured at 1.4420 MeV using the Coulomb Explosion Technique. The measured bond length of ^4HeH^+ is 0.094±0.003nm. The bond length of ...The bond length of ^4HeH^+ resulting from collision-induced destruction is measured at 1.4420 MeV using the Coulomb Explosion Technique. The measured bond length of ^4HeH^+ is 0.094±0.003nm. The bond length of ^4HeH^+ obtained with our radio frequency (RF) ion source is larger than that obtained with a duoplasmatron ion source at Argonne National Laboratory (ANL), but the bond lengths of H^+2 and H^+3obtained separately by ANL and by us with the two different ion sources are consistent with each other, which implies that there exists an ion source effect on the bond length of ^4HeH^+. The main reason why the 4^4HeH^+ bond lengths obtained by the two different ion sources are different is also discussed.展开更多
Based on the two-component relativistic effective core potential and matched basis sets cc-pwcvnz-pp (n=Q, 5), combining the completed basis-set extrapolation of electronic correlation energy and the fourth-order po...Based on the two-component relativistic effective core potential and matched basis sets cc-pwcvnz-pp (n=Q, 5), combining the completed basis-set extrapolation of electronic correlation energy and the fourth-order polynomial fitting technique, the bond length and spectroscopic constants of Hg2 are studied by the coupled cluster theory with spin-orbit coupling. Spin-orbit coupling is included in the post Hartree-Fock procedure, i.e., in the coupled- cluster iteration, to obtain more reliable theoretical results. The results show that our theoretical values agree with the experimental values very well and will be helpful to understand the spectral character of Hg2.展开更多
By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization(DI) process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ioniza...By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization(DI) process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ionization probability presents a "knee" structure with equilibrium internuclear distance R = 2.9245 a.u.(a.u. is short for atomic unit). As the bond length of CS increases, the DI probability is enhanced and the "knee" structure becomes less obvious. In addition,the momentum distribution of double ionized electrons is also investigated, which shows the momentum mostly distributed in the first and third quadrants with equilibrium internuclear distance R = 2.9245 a.u. As the bond length of CS increases,the electron momentum becomes evenly distributed in the four quadrants. Furthermore, the energy distributions and the corresponding trajectories of the double-ionized electrons versus time are also demonstrated, which show that the bond length of CS in the CS_2 molecule plays a key role in the DI process.展开更多
The main reaction products were investigated by analysis of microstructure of alkali-activated ground granulated blast furnace slag (GGBFS) paste. An experimental research was performed on bond performance of alkali...The main reaction products were investigated by analysis of microstructure of alkali-activated ground granulated blast furnace slag (GGBFS) paste. An experimental research was performed on bond performance of alkali-activated GGBFS paste as a construction adhesive after exposure to 20-500℃. Through XRD analysis, a few calcium silicate hydrate, hydrotalcite and tetracalcium aluminate hydrate were determined as end products, and they were filled and packed each other at room temperature. In addition, akermanite dramatically increased at 800 ~C and above. The two key parameters, the ultimate load Pu.T and effective bond length Le, were determined using test data of carbon fiber-reinforced polymer (CFRP)-to-concrete bonded joints at elevated temperature. The experimental results indicate that the ultimate load Pu.T remains relatively stable initially and then decreases with increasing temperature. The effective bond length Le increases with increasing temperature except at 300℃. The proposed temperature-dependent effective bond length formula is shown to closely represent the test data.展开更多
A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivatio...A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivation of the formulations. A tri-linear bond-slip constitutive law is used for modeling the tendon-grout interface behavior and debonding of this interface. The bearing plate width is also considered in the analysis. The obtained solutions are in the integral forms and numerical techniques that have been used for evaluation. In the illustrative example given, the major principal stress is compressive in the anchor free zone and compressive stress concentrations of 815 k Pa and 727 k Pa(for the anchor load of 300 k N) are observed under the bearing plate and the bond length proximal end, respectively. However, large values of tensile stresses with the maximum of-434 k Pa are formed at the bond length distal end. The results obtained using the proposed solution are compared very those of numerical method(FEM).展开更多
The calcining process was recorded by differential scanning calorimetry and ther-mogravimetry (DSC-TG). The dehydroxylation (activating process) was partitioned into two steps by calculating and comparing the O-H ...The calcining process was recorded by differential scanning calorimetry and ther-mogravimetry (DSC-TG). The dehydroxylation (activating process) was partitioned into two steps by calculating and comparing the O-H bond lengths between inner hydroxyl group and surface hydroxyl group, as well as the ionic bond of Al-OH and position of -OH. X-ray diffraction (XRD) and compressive strength measurement show that the activity of calcined materials increases with the increasing of temperature in dehydroxylation region but decreases abruptly in the "spinel" region. The suggested temperature for activating kaolinite is 900 ℃ .展开更多
In this work,we measure the Raman scattering cross sections(RSCSs) of the carbon-carbon(CC) stretching vibrational modes of canthaxanthin in benzene,acetone,n-heptane,cyclohexane,and m-xylene.It is found that the ...In this work,we measure the Raman scattering cross sections(RSCSs) of the carbon-carbon(CC) stretching vibrational modes of canthaxanthin in benzene,acetone,n-heptane,cyclohexane,and m-xylene.It is found that the absolute RSCS of CC stretching mode of canthaxanthin reaches a value of 10 24 cm ^-2 ·molecule ^-1 ·sr ^-1 at 8×10 ^-5 M,which is 6 orders of magnitude larger than general RSCS(10 30 cm 2 ·molecule 1 ·sr 1),and the RSCSs of canthaxanthin in various solvents are very different due to the hydrogen bond.A theoretical interpretation of the magnetic experimental results is given,which is introduced in a qualitative nonlinear model of coherent weakly damped electron-lattice vibration in the structural order of polyene chains.In addition,the optimal structure and the bond length alternation(BLA) parameter of canthaxanthin are calculated using quantum chemistry calculation(at the b3lyp/6-31g(d,p) level of theory).The theoretical calculations are in good agreement with the experimental results.Furthermore,the combination of Raman spectroscopy and the quantum chemistry calculation study would be a quite suitable method of studying the structures and the properties of the π-conjugated systems.展开更多
To study the extraction difficulty of lithium ions from various crystal planes of Li2 TiO3, according to the first principle, four representative crystal surfaces of Li2TiO3(precursor),(-133),(-206),(002) and...To study the extraction difficulty of lithium ions from various crystal planes of Li2 TiO3, according to the first principle, four representative crystal surfaces of Li2TiO3(precursor),(-133),(-206),(002) and(-131), were selected to establish a model and to calculate the surface energy, bond length and population using Materials Studio 5.5(MS 5.5). The results demonstrate that there is no direct relationship between the surface energy and the order of disappearance of the four diffraction peaks when lithium titanate is treated with hydrochloric acid, instead, the difficulty of Li~+ extraction from various crystal faces corresponds to the Li-O bond strength. Lithium ion is easy to remove from(-133) and(-206) due to the relatively weak Li-O bond strength. In contrast, Li+ extraction requires a longer time for(002) and(-131).展开更多
The minerals of chevkinite group were commonly considered to be anhydrous minerals. The infrared absorption spectrum of natural nonmetamict chevkinite-(Ce) from the aegirine-alkali granite, Miannlng, Sichuan Provinc...The minerals of chevkinite group were commonly considered to be anhydrous minerals. The infrared absorption spectrum of natural nonmetamict chevkinite-(Ce) from the aegirine-alkali granite, Miannlng, Sichuan Province, China, exhibited two broad peaks in the 3600-2800 cm^-1 region owing to the OH stretching. The corresponding H20 content required for the charge balance in formula was 1.27%. The O-H. … O bond lengths maight cover from 0.2658 to 0.2794 nm by the correlated OH stretching energies. An electrostatic charge balance for chevkinite-(Ce) based on the assigned site-population from chemical data was calculated without the hydrogen contribution. The resulting empirical bond-valence sum on 06, 08, 02, 03, 05, and 04 ranged from 1.73 to 1.95 vu. The partial substitution of O by OH may occur in four atom sites: 06, 02, 04, and 05. The small differences in the bond-valence sums between the supposed donors and acceptors may mean a mixed donor/acceptor role of the involved oxygen atoms. The IR spectral features between 3394 and 3035 cm-1 consisted of various hydrous species at different structural sites and orientations. The OH groups in the chevkinlte-(Ce) appeared to be involved in local charge imbalance in the structure and to be present when the mineral crystallized hydrothermally.展开更多
The static O-H bond parameters including O-H bond length, O-H charge difference, O-H Mulliken population and O-H bond stretching force constant (k) for 17 phenols were calculated by ab initio method HF/6-31G**. In com...The static O-H bond parameters including O-H bond length, O-H charge difference, O-H Mulliken population and O-H bond stretching force constant (k) for 17 phenols were calculated by ab initio method HF/6-31G**. In combination with the O-H bond dissociation enthalpies (BDE) of the phenols determined by experiment, it was found that there were poor correlationships between the static O-H bond parameters and O-H BDE. Considering the good correlationship bt tween O-H BDE and logarithm of free radical scavenging rate constant for phenolic antioxidant, it is reasonable to believe that the ineffectiveness of static O-H bond parameters in characterizing antioxidant activity arises from the fact that they cannot measure the O-H BDE.展开更多
The ideal formula for chevkinite can be expressed as A4BC2D2Si4O22. It is important to determine the valence state and site occupation proportions for Fe among the B, C, and D octahedral sites as it may help to identi...The ideal formula for chevkinite can be expressed as A4BC2D2Si4O22. It is important to determine the valence state and site occupation proportions for Fe among the B, C, and D octahedral sites as it may help to identify different species in the chevkinite group. Non-metamict chevkinite-(Ce) from Mianxi alkali feldspar-granite, Sichuan Province, China, was investigated using Moessbauer spectroscopy. The Fe^3+/∑Fe ratio was 39.2%. A significant increase of Fe^3+ occured during metamictization and annealing for chevkinite-group minerals. In metamict samples Fe tended to lower coordination, According to the correlation between bond length and isomer shift (IS), the quadrupole doublets with IS = 1.10 and 0.94 mm·s^-1 can be assigned to Fe^2+ in the B and C octahedral sites, respectively. Based on the correlation between octahedral distortion and quadrupole splitting (QS), the quadrupole doublets with QS = 0.86 and 0.77 mm·s^-1 can be assigned to Fe^3+ in the C and D sites, respectively. The simplified formula can be revised as: Ce4Fe^2+ (Ti, Fe^2+, Fe^3+ )2(Ti, Fe^3+ )2Si4(O,OH)22. It indicated that the non-metamict chevkinite-(Ce) belonged to Fe^2+ end member of the chevkinite group because Fe^2+ was the predominant component in the B site.展开更多
We present a quantum-chemical analysis of the relationship between the bond length alteration (BLA) and the static first hyperpolarizability of a series of one-dimensional (1D) chromophores with donor-bridge-accep...We present a quantum-chemical analysis of the relationship between the bond length alteration (BLA) and the static first hyperpolarizability of a series of one-dimensional (1D) chromophores with donor-bridge-acceptor (D-B-A) structures. The calculated results show that the parameter BLA can be considered as an indicator to evaluate the molecular first hyper- polarizability. Along the direction of molecular ground-state dipole moments, the evolutions of BLA can be classified into three categories: the first is a non-monotonic line, which represents most chromophores; the second is monotonic increasing; and the third, contrarily, is monotonic decreasing. On the whole, the first hyperpolarizabilities of these studied chromophores are the monotonic functions of BLA along the direction of dipole moments. Therefore, the first hyperpolarizability of these 1D chromophores can be preliminarily evaluated in terms of the development of BLA without a rigorous computation. In other words, one can roughly estimate the relative magnitude of the first hyperpolarizability according to the optimized geometry.展开更多
The present work concerns the study of solvent effects on the geometrical structures, as well as one- and two-photon absorption (TPA) processes, for two series of alkyne and alkene π-bridging molecules, within the ...The present work concerns the study of solvent effects on the geometrical structures, as well as one- and two-photon absorption (TPA) processes, for two series of alkyne and alkene π-bridging molecules, within the framework of the polarization continuum model. Particular emphasis was put on the characterization of solvent effects on the molecular geometrical structures and geometric distortion, which were measured by the bond-length-alternation parameter. The π centres in the compounds are seen to play a decisive role in increasing the TPA cross section and nonlinear optical properties. All studied molecules have relatively strong TPA characteristics, while the alkyne π-bridging ones yield larger TPA cross sections.展开更多
We theoretically investigate high-order harmonic generation from H + 2 in an infrared laser field.Our numerical simulations show that a highly efficient plateau structure exists in the molecular harmonic spectrum.Und...We theoretically investigate high-order harmonic generation from H + 2 in an infrared laser field.Our numerical simulations show that a highly efficient plateau structure exists in the molecular harmonic spectrum.Under the action of the infrared laser pulse,the bound electronic wave packet in a potential well has enough time to tunnel through the effective potential barrier,which is formed by the molecular potential and the infrared laser field,and then recombine with the neighboring nucleus emitting a harmonic photon.During the entire dynamic process,because the wave packet is mainly located in the effective potential,the diffusion effect is of no significance,and thus a highly efficient harmonic plateau can be achieved.Specifically,the cut-off frequency of the plateau is linearly scaled with the peak amplitude of the infrared laser electric field,which may open another route to examine the internuclear distance of the molecule.Furthermore,one may detect the molecular bond lengths using the harmonic plateau.展开更多
By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocya...By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.展开更多
Carbon forms a variety of compounds with single, double, triple and the intermediate resonance bonds with atoms of its own or other kinds. This paper is concerned with graphite, a very useful material, which is a stac...Carbon forms a variety of compounds with single, double, triple and the intermediate resonance bonds with atoms of its own or other kinds. This paper is concerned with graphite, a very useful material, which is a stack of electrically conducting graphene layers held together by weak van der Waals (vdW) bonds. It crystallizes in hexagonal and rhombohedral forms, in which the hexagon inter-planar bond distance is 0.34 nm. Here a new and simple approach accounts for this bond length and shows the coulombic nature of the vdW bond.展开更多
In this paper,a primary model is established for MD(molecular dynamics) simulation for the PBXs(polymer-bonded explosives) with RDX(cyclotrimethylene trinitramine) as base explosive and PS as polymer binder.A series o...In this paper,a primary model is established for MD(molecular dynamics) simulation for the PBXs(polymer-bonded explosives) with RDX(cyclotrimethylene trinitramine) as base explosive and PS as polymer binder.A series of results from the MD simulation are compared between two PBX models,which are represented by PBX1 and PBX2,respectively,including one PS molecular chain having 46 repeating units and two PS molecular chains with each having 23 repeating units.It has been found that their structural,interaction energy and mechanical properties are basically consistent between the two models.A systematic MD study for the PBX2 is performed under NPT conditions at five different temperatures,i.e.,195 K,245 K,295 K,345 K,and 395 K.We have found that with the temperature increase,the maximum bond length(L max) of RDX N N trigger bond increases,and the interaction energy(E N-N) between two N atoms of the N-N trigger bond and the cohesive energy density(CED) decrease.These phenomena agree with the experimental fact that the PBX becomes more sensitive as the temperature increases.Therefore,we propose to use the maximum bond length L max of the trigger bond of the easily decomposed and exploded component and the interaction energy E N-N of the two relevant atoms as theoretical criteria to judge or predict the relative degree of heat and impact sensitivity for the energetic composites such as PBXs and solid propellants.展开更多
Pr_(2)(Zr_(1−x)Ti_(x))_(3)(MoO_(4))_(9)(x=0.1-1.0)ceramics were prepared via a conventional solid-state method,the dependence of crystal structure and bond characteristics on microwave dielectric properties was invest...Pr_(2)(Zr_(1−x)Ti_(x))_(3)(MoO_(4))_(9)(x=0.1-1.0)ceramics were prepared via a conventional solid-state method,the dependence of crystal structure and bond characteristics on microwave dielectric properties was investigated systemically.The X-ray diffraction patterns indicated that the single-phase Pr_(2)Zr_(3)(MoO_(4))_(9)structure was formed in all the specimens.As the Ti^(4+)content increased,the lattice volume gradually decreased,which was ascribed to the fact that the ionic radius of Ti^(4+)was smaller than that of Zr^(4+).Notably,outstanding microwave dielectric properties withεr of 10.73-16.35,Q·f values of 80,696-18,726 GHz and minorτ_(f) values−14.1-−2.6 ppm/℃were achieved in Pr_(2)(Zr_(1−x)Ti_(x))_(3)(MoO_(4))_(9)ceramics.Theε_(r) increased with the rising x values,which was associated with the increase ofα/Vm values.The decreasing Q·f was affected by the decline of lattice energy of[Zr/TiO_(6)]octahedral.Theτf value was dominated by[Zr/TiO_(6)]octahedral distortion,Mo-O bond energy,bond strength and B-site bond valence.Furthermore,infrared reflection spectra suggested that the properties were mainly caused by the absorption of phonon,and the dielectric loss could be further reduced by optimizing the experimental process.展开更多
基金supported by the National Key Research and Development Program of China (2022YFB4002100)the development project of Zhejiang Province's "Jianbing" and "Lingyan" (2023C01226)+4 种基金the National Natural Science Foundation of China (22278364, U22A20432, 22238008, 22211530045, and 22178308)the Fundamental Research Funds for the Central Universities (226-2022-00044 and 226-2022-00055)the Science Foundation of Donghai Laboratory (DH-2022ZY0009)the Startup Foundation for Hundred-Talent Program of Zhejiang UniversityScientific Research Fund of Zhejiang Provincial Education Department.
文摘Metal-organic frameworks(MOFs)have been developed as an ideal platform for exploration of the relationship between intrinsic structure and catalytic activity,but the limited catalytic activity and stability has hampered their practical use in water splitting.Herein,we develop a bond length adjustment strategy for optimizing naphthalene-based MOFs that synthesized by acid etching Co-naphthalenedicarboxylic acid-based MOFs(donated as AE-CoNDA)to serve as efficient catalyst for water splitting.AE-CoNDA exhibits a low overpotential of 260 mV to reach 10 mA cm^(−2)and a small Tafel slope of 62 mV dec^(−1)with excellent stability over 100 h.After integrated AE-CoNDA onto BiVO_(4),photocurrent density of 4.3 mA cm^(−2)is achieved at 1.23 V.Experimental investigations demonstrate that the stretched Co-O bond length was found to optimize the orbitals hybridization of Co 3d and O 2p,which accounts for the fast kinetics and high activity.Theoretical calculations reveal that the stretched Co-O bond length strengthens the adsorption of oxygen-contained intermediates at the Co active sites for highly efficient water splitting.
基金ACKNOWLEDGMENTS This work was supported by Young Scientists Fund of the National Natural Science Foundation of China (No.10904085).
文摘Rotational isomerism effects on the optical spectra of a push-pull nonlinear optical chro-mophore 2-dicyanomethylen-3-cyano-4-f2-[E-(4-N,N-di(2-acetoxyethyl)-amino)-phenylene-(3,4-dibutyl)-thien-5]-E-vinylg-5,5-dimethyl-2,5-dihydrofuran (FTC) in a few solvents have been studied using the time-dependent density functional theory in combination with the polarizable continuum model. It is shown that the maximum absorption peaks of the ro-tamers have difference of nearly 30 nm both in vacuum and in solutions. The population of the rotamers changes a lot in different solvents. Based on the geometries optimized by Hartree-Fock method, the Maxwell-Boltzmann averaged absorption has been calculated and the maximum absorption peak is in good agreement with experiment. It indicates that the bond length alternation can have an important effect on the optical spectra.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10175041 and 10375040).
文摘The bond length of ^4HeH^+ resulting from collision-induced destruction is measured at 1.4420 MeV using the Coulomb Explosion Technique. The measured bond length of ^4HeH^+ is 0.094±0.003nm. The bond length of ^4HeH^+ obtained with our radio frequency (RF) ion source is larger than that obtained with a duoplasmatron ion source at Argonne National Laboratory (ANL), but the bond lengths of H^+2 and H^+3obtained separately by ANL and by us with the two different ion sources are consistent with each other, which implies that there exists an ion source effect on the bond length of ^4HeH^+. The main reason why the 4^4HeH^+ bond lengths obtained by the two different ion sources are different is also discussed.
基金Supported by the Start-Up Funds of Xi’an Polytechnic University under Grant No BS1211the Scientific Research Program Funded by Shaanxi Provincial Education Department under Grant No 2013JK0679
文摘Based on the two-component relativistic effective core potential and matched basis sets cc-pwcvnz-pp (n=Q, 5), combining the completed basis-set extrapolation of electronic correlation energy and the fourth-order polynomial fitting technique, the bond length and spectroscopic constants of Hg2 are studied by the coupled cluster theory with spin-orbit coupling. Spin-orbit coupling is included in the post Hartree-Fock procedure, i.e., in the coupled- cluster iteration, to obtain more reliable theoretical results. The results show that our theoretical values agree with the experimental values very well and will be helpful to understand the spectral character of Hg2.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11574117 and11604131)
文摘By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization(DI) process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ionization probability presents a "knee" structure with equilibrium internuclear distance R = 2.9245 a.u.(a.u. is short for atomic unit). As the bond length of CS increases, the DI probability is enhanced and the "knee" structure becomes less obvious. In addition,the momentum distribution of double ionized electrons is also investigated, which shows the momentum mostly distributed in the first and third quadrants with equilibrium internuclear distance R = 2.9245 a.u. As the bond length of CS increases,the electron momentum becomes evenly distributed in the four quadrants. Furthermore, the energy distributions and the corresponding trajectories of the double-ionized electrons versus time are also demonstrated, which show that the bond length of CS in the CS_2 molecule plays a key role in the DI process.
基金Funded by the National Natural Science Foundation of China(50178026)the Cheung Kong Scholars Program Foundation of Chinese Ministry of Education(2009-37)
文摘The main reaction products were investigated by analysis of microstructure of alkali-activated ground granulated blast furnace slag (GGBFS) paste. An experimental research was performed on bond performance of alkali-activated GGBFS paste as a construction adhesive after exposure to 20-500℃. Through XRD analysis, a few calcium silicate hydrate, hydrotalcite and tetracalcium aluminate hydrate were determined as end products, and they were filled and packed each other at room temperature. In addition, akermanite dramatically increased at 800 ~C and above. The two key parameters, the ultimate load Pu.T and effective bond length Le, were determined using test data of carbon fiber-reinforced polymer (CFRP)-to-concrete bonded joints at elevated temperature. The experimental results indicate that the ultimate load Pu.T remains relatively stable initially and then decreases with increasing temperature. The effective bond length Le increases with increasing temperature except at 300℃. The proposed temperature-dependent effective bond length formula is shown to closely represent the test data.
文摘A new analytical study on stresses around a post-tensioned anchor in rocks with two perpendicular joint sets is presented. The assumptions of orthotropic elastic rock with plane strain conditions are made in derivation of the formulations. A tri-linear bond-slip constitutive law is used for modeling the tendon-grout interface behavior and debonding of this interface. The bearing plate width is also considered in the analysis. The obtained solutions are in the integral forms and numerical techniques that have been used for evaluation. In the illustrative example given, the major principal stress is compressive in the anchor free zone and compressive stress concentrations of 815 k Pa and 727 k Pa(for the anchor load of 300 k N) are observed under the bearing plate and the bond length proximal end, respectively. However, large values of tensile stresses with the maximum of-434 k Pa are formed at the bond length distal end. The results obtained using the proposed solution are compared very those of numerical method(FEM).
基金Funded by the National High-Tech Research and Development Programof China(No. 2006AA06Z225)
文摘The calcining process was recorded by differential scanning calorimetry and ther-mogravimetry (DSC-TG). The dehydroxylation (activating process) was partitioned into two steps by calculating and comparing the O-H bond lengths between inner hydroxyl group and surface hydroxyl group, as well as the ionic bond of Al-OH and position of -OH. X-ray diffraction (XRD) and compressive strength measurement show that the activity of calcined materials increases with the increasing of temperature in dehydroxylation region but decreases abruptly in the "spinel" region. The suggested temperature for activating kaolinite is 900 ℃ .
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11004252 and 10974067)the National Basic Research Program of China (Grant No. 2012CB722802)
文摘In this work,we measure the Raman scattering cross sections(RSCSs) of the carbon-carbon(CC) stretching vibrational modes of canthaxanthin in benzene,acetone,n-heptane,cyclohexane,and m-xylene.It is found that the absolute RSCS of CC stretching mode of canthaxanthin reaches a value of 10 24 cm ^-2 ·molecule ^-1 ·sr ^-1 at 8×10 ^-5 M,which is 6 orders of magnitude larger than general RSCS(10 30 cm 2 ·molecule 1 ·sr 1),and the RSCSs of canthaxanthin in various solvents are very different due to the hydrogen bond.A theoretical interpretation of the magnetic experimental results is given,which is introduced in a qualitative nonlinear model of coherent weakly damped electron-lattice vibration in the structural order of polyene chains.In addition,the optimal structure and the bond length alternation(BLA) parameter of canthaxanthin are calculated using quantum chemistry calculation(at the b3lyp/6-31g(d,p) level of theory).The theoretical calculations are in good agreement with the experimental results.Furthermore,the combination of Raman spectroscopy and the quantum chemistry calculation study would be a quite suitable method of studying the structures and the properties of the π-conjugated systems.
基金Funded partly by the Key Project of Natural Science of Sichuan Provincial Education Department(No.16ZA0309)the Doctoral Research Start-up Funding(No.15B16)
文摘To study the extraction difficulty of lithium ions from various crystal planes of Li2 TiO3, according to the first principle, four representative crystal surfaces of Li2TiO3(precursor),(-133),(-206),(002) and(-131), were selected to establish a model and to calculate the surface energy, bond length and population using Materials Studio 5.5(MS 5.5). The results demonstrate that there is no direct relationship between the surface energy and the order of disappearance of the four diffraction peaks when lithium titanate is treated with hydrochloric acid, instead, the difficulty of Li~+ extraction from various crystal faces corresponds to the Li-O bond strength. Lithium ion is easy to remove from(-133) and(-206) due to the relatively weak Li-O bond strength. In contrast, Li+ extraction requires a longer time for(002) and(-131).
基金the National Natural Science Foundation of China (40572029)
文摘The minerals of chevkinite group were commonly considered to be anhydrous minerals. The infrared absorption spectrum of natural nonmetamict chevkinite-(Ce) from the aegirine-alkali granite, Miannlng, Sichuan Province, China, exhibited two broad peaks in the 3600-2800 cm^-1 region owing to the OH stretching. The corresponding H20 content required for the charge balance in formula was 1.27%. The O-H. … O bond lengths maight cover from 0.2658 to 0.2794 nm by the correlated OH stretching energies. An electrostatic charge balance for chevkinite-(Ce) based on the assigned site-population from chemical data was calculated without the hydrogen contribution. The resulting empirical bond-valence sum on 06, 08, 02, 03, 05, and 04 ranged from 1.73 to 1.95 vu. The partial substitution of O by OH may occur in four atom sites: 06, 02, 04, and 05. The small differences in the bond-valence sums between the supposed donors and acceptors may mean a mixed donor/acceptor role of the involved oxygen atoms. The IR spectral features between 3394 and 3035 cm-1 consisted of various hydrous species at different structural sites and orientations. The OH groups in the chevkinlte-(Ce) appeared to be involved in local charge imbalance in the structure and to be present when the mineral crystallized hydrothermally.
文摘The static O-H bond parameters including O-H bond length, O-H charge difference, O-H Mulliken population and O-H bond stretching force constant (k) for 17 phenols were calculated by ab initio method HF/6-31G**. In combination with the O-H bond dissociation enthalpies (BDE) of the phenols determined by experiment, it was found that there were poor correlationships between the static O-H bond parameters and O-H BDE. Considering the good correlationship bt tween O-H BDE and logarithm of free radical scavenging rate constant for phenolic antioxidant, it is reasonable to believe that the ineffectiveness of static O-H bond parameters in characterizing antioxidant activity arises from the fact that they cannot measure the O-H BDE.
基金Project supported by the National Natural Science Foundation of China (40572029)
文摘The ideal formula for chevkinite can be expressed as A4BC2D2Si4O22. It is important to determine the valence state and site occupation proportions for Fe among the B, C, and D octahedral sites as it may help to identify different species in the chevkinite group. Non-metamict chevkinite-(Ce) from Mianxi alkali feldspar-granite, Sichuan Province, China, was investigated using Moessbauer spectroscopy. The Fe^3+/∑Fe ratio was 39.2%. A significant increase of Fe^3+ occured during metamictization and annealing for chevkinite-group minerals. In metamict samples Fe tended to lower coordination, According to the correlation between bond length and isomer shift (IS), the quadrupole doublets with IS = 1.10 and 0.94 mm·s^-1 can be assigned to Fe^2+ in the B and C octahedral sites, respectively. Based on the correlation between octahedral distortion and quadrupole splitting (QS), the quadrupole doublets with QS = 0.86 and 0.77 mm·s^-1 can be assigned to Fe^3+ in the C and D sites, respectively. The simplified formula can be revised as: Ce4Fe^2+ (Ti, Fe^2+, Fe^3+ )2(Ti, Fe^3+ )2Si4(O,OH)22. It indicated that the non-metamict chevkinite-(Ce) belonged to Fe^2+ end member of the chevkinite group because Fe^2+ was the predominant component in the B site.
基金the National Natural Science Foundation of China (20573114)the MOST projects of 2004CB720605and 2006DFA403020
文摘We present a quantum-chemical analysis of the relationship between the bond length alteration (BLA) and the static first hyperpolarizability of a series of one-dimensional (1D) chromophores with donor-bridge-acceptor (D-B-A) structures. The calculated results show that the parameter BLA can be considered as an indicator to evaluate the molecular first hyper- polarizability. Along the direction of molecular ground-state dipole moments, the evolutions of BLA can be classified into three categories: the first is a non-monotonic line, which represents most chromophores; the second is monotonic increasing; and the third, contrarily, is monotonic decreasing. On the whole, the first hyperpolarizabilities of these studied chromophores are the monotonic functions of BLA along the direction of dipole moments. Therefore, the first hyperpolarizability of these 1D chromophores can be preliminarily evaluated in terms of the development of BLA without a rigorous computation. In other words, one can roughly estimate the relative magnitude of the first hyperpolarizability according to the optimized geometry.
文摘The present work concerns the study of solvent effects on the geometrical structures, as well as one- and two-photon absorption (TPA) processes, for two series of alkyne and alkene π-bridging molecules, within the framework of the polarization continuum model. Particular emphasis was put on the characterization of solvent effects on the molecular geometrical structures and geometric distortion, which were measured by the bond-length-alternation parameter. The π centres in the compounds are seen to play a decisive role in increasing the TPA cross section and nonlinear optical properties. All studied molecules have relatively strong TPA characteristics, while the alkyne π-bridging ones yield larger TPA cross sections.
基金Project supported by the National Basic Research Program of China (Grant No. 2013CB922200)the National Natural Science Foundation of China (Grant Nos. 11274141 and 11034003)the Natural Science Foundation of Zhejiang Province,China (Grant No. Y6110578)
文摘We theoretically investigate high-order harmonic generation from H + 2 in an infrared laser field.Our numerical simulations show that a highly efficient plateau structure exists in the molecular harmonic spectrum.Under the action of the infrared laser pulse,the bound electronic wave packet in a potential well has enough time to tunnel through the effective potential barrier,which is formed by the molecular potential and the infrared laser field,and then recombine with the neighboring nucleus emitting a harmonic photon.During the entire dynamic process,because the wave packet is mainly located in the effective potential,the diffusion effect is of no significance,and thus a highly efficient harmonic plateau can be achieved.Specifically,the cut-off frequency of the plateau is linearly scaled with the peak amplitude of the infrared laser electric field,which may open another route to examine the internuclear distance of the molecule.Furthermore,one may detect the molecular bond lengths using the harmonic plateau.
文摘By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.
文摘Carbon forms a variety of compounds with single, double, triple and the intermediate resonance bonds with atoms of its own or other kinds. This paper is concerned with graphite, a very useful material, which is a stack of electrically conducting graphene layers held together by weak van der Waals (vdW) bonds. It crystallizes in hexagonal and rhombohedral forms, in which the hexagon inter-planar bond distance is 0.34 nm. Here a new and simple approach accounts for this bond length and shows the coulombic nature of the vdW bond.
基金supported by the National Key Laboratory of Shock Wave and Detonation Physics,Institute of Fluid Physics,China Academy of Engineering Physics(076100-1197F)the Defence Industrial Technology Development Program(B1520110002)the State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(KFJJ09-5)
文摘In this paper,a primary model is established for MD(molecular dynamics) simulation for the PBXs(polymer-bonded explosives) with RDX(cyclotrimethylene trinitramine) as base explosive and PS as polymer binder.A series of results from the MD simulation are compared between two PBX models,which are represented by PBX1 and PBX2,respectively,including one PS molecular chain having 46 repeating units and two PS molecular chains with each having 23 repeating units.It has been found that their structural,interaction energy and mechanical properties are basically consistent between the two models.A systematic MD study for the PBX2 is performed under NPT conditions at five different temperatures,i.e.,195 K,245 K,295 K,345 K,and 395 K.We have found that with the temperature increase,the maximum bond length(L max) of RDX N N trigger bond increases,and the interaction energy(E N-N) between two N atoms of the N-N trigger bond and the cohesive energy density(CED) decrease.These phenomena agree with the experimental fact that the PBX becomes more sensitive as the temperature increases.Therefore,we propose to use the maximum bond length L max of the trigger bond of the easily decomposed and exploded component and the interaction energy E N-N of the two relevant atoms as theoretical criteria to judge or predict the relative degree of heat and impact sensitivity for the energetic composites such as PBXs and solid propellants.
基金supported by the National Natural Science Foundation of China(No.51972143)supported by State Key Laboratory of New Ceramic and Fine Processing Tsinghua University(No.KFZD202101)。
文摘Pr_(2)(Zr_(1−x)Ti_(x))_(3)(MoO_(4))_(9)(x=0.1-1.0)ceramics were prepared via a conventional solid-state method,the dependence of crystal structure and bond characteristics on microwave dielectric properties was investigated systemically.The X-ray diffraction patterns indicated that the single-phase Pr_(2)Zr_(3)(MoO_(4))_(9)structure was formed in all the specimens.As the Ti^(4+)content increased,the lattice volume gradually decreased,which was ascribed to the fact that the ionic radius of Ti^(4+)was smaller than that of Zr^(4+).Notably,outstanding microwave dielectric properties withεr of 10.73-16.35,Q·f values of 80,696-18,726 GHz and minorτ_(f) values−14.1-−2.6 ppm/℃were achieved in Pr_(2)(Zr_(1−x)Ti_(x))_(3)(MoO_(4))_(9)ceramics.Theε_(r) increased with the rising x values,which was associated with the increase ofα/Vm values.The decreasing Q·f was affected by the decline of lattice energy of[Zr/TiO_(6)]octahedral.Theτf value was dominated by[Zr/TiO_(6)]octahedral distortion,Mo-O bond energy,bond strength and B-site bond valence.Furthermore,infrared reflection spectra suggested that the properties were mainly caused by the absorption of phonon,and the dielectric loss could be further reduced by optimizing the experimental process.