The temperature distribution in laminated beams underging thermal boundary conditions has been investigated.The thermal boundary conditions are general and include various combinations of prescribed heat fluxes and te...The temperature distribution in laminated beams underging thermal boundary conditions has been investigated.The thermal boundary conditions are general and include various combinations of prescribed heat fluxes and temperatures at the edges.An analytical solution of temperature for the laminated beam is present on the basis of the heat conduction theory in this paper.The proposed method is applicable to the beams with arbitrary thickness and layer numbers.Due to the complexity of the boundary conditions,the temperature field to be determined was considered from two sources.The first part was the temperature field from the complex temperature conditions at two edges of the laminated beam.The solution for the temperature of the first part was constructed to satisfy temperature boundary conditions at two edges.The second part was the temperature field from the upper and lower surface temperatures without taking account of the thermal conditions at two edges.In this part,the exact solution for the temperature was obtained based on the heat conduction theory.The convergence of the solution was examined by analyzing terms of Fourier series.The validity and feasibility of the proposed method was verified by comparing theoretical results with numerical results due to the equivalent single layer approach and the finite element method(FEM).The influences of surface temperatures,beam thicknesses,layer numbers and material properties with respects to the solution of the temperature field of the beam were investigated via a series of parametric studies.展开更多
In this paper,we discuss the local existence of H^i(i=2,4)solutions for a 1D compressible viscous micropolar fluid model with non-homogeneous temperature boundary.The proof is based on the local existence of solutions...In this paper,we discuss the local existence of H^i(i=2,4)solutions for a 1D compressible viscous micropolar fluid model with non-homogeneous temperature boundary.The proof is based on the local existence of solutions in[1].展开更多
According to the principle of grain refining and slurry preparation by cooling sloping plate process, the distributions of boundary layers during melt treatment by cooling sloping plate were studied, and mathematic mo...According to the principle of grain refining and slurry preparation by cooling sloping plate process, the distributions of boundary layers during melt treatment by cooling sloping plate were studied, and mathematic model of cooling rate was established. The calculation value approximately agrees with the experimental result. Laminar flow and turbulent flow exist on sloping plate surface commonly. The thickness of velocity boundary layer and the critical transfer distance from laminar flow to turbulent flow increase with the decrease of initial flow velocity. The thickness of temperature boundary layer increases with the increment of flow distance and the decrease of initial flow velocity. The melt cooling rate and melt thickness have an inverse proportion relationship. The melt cooling rate increases along the plate direction gradually when the initial flow velocity is lower than 1 m/s, the melt cooling rate keeps nearly a constant when the initial flow velocity is 1 m/ s, when the initial flow velocity is higher than 1 m/s, the melt cooling rate decreases gradually. The melt cooling rate of cooling sloping plate process can reach 102-103 K/s and belongs to meta-rapid solidification scope.展开更多
Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we...Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we review researches on lightweight metals spun at elevated temperatures since they are difficult to deform at room temperature. These metals include light alloys, such as titanium, magnesium and aluminum alloys, and metal composites. Then, the heating methods used in the hot spinning process and the treatment methods employed for the temperature boundary condition in finite element analyses for the process were discussed. Finally, the future development directions for the hot spinning process of lightweight but difficult-to-deform alloys were highlighted.展开更多
Heteroepitaxial undoped ZnO films were grown on Si （100） substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ （Sample 1, S1） and 02-800℃ （Sample 2, S2） for 1...Heteroepitaxial undoped ZnO films were grown on Si （100） substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ （Sample 1, S1） and 02-800℃ （Sample 2, S2） for 1 h, respectively. The electrical transport characteristics of a ZnO/p-Si heterojunction were investigated. We found two interesting phenomena. First, the temperature coefficients of grain boundary resistances of S 1 were positive （positive temperature coefficients, PTC） while that of both the as-grown sample and S2 were negative （negative temperature coefficients, NTC）. Second, the I-V properties of S2 were similar to those common p-n junctions while that of both the as-grown sample and S 1 had double Schottky barrier behaviors, which were in contradiction with the ideal p-n heterojunction model. Combined with the deep level transient spectra results, this revealed that the concentrations of intrinsic defects in ZnO grains and the densities of interfacial states in ZnO/p-Si heterojunction varied with the different annealing ambiences, which caused the grain boundary barriers in ZnO/p-Si heterojunction to vary. This resulted in adjustment electrical properties ofZnO/p-Si heterojunction that may be suitable in various applications.展开更多
The data measured by using the two-disc tester show that the concentration of EP addi- tives and the viscosity temperature characteristic of lubricant have a cooperation effect on the fric- tion coefficient in boundar...The data measured by using the two-disc tester show that the concentration of EP addi- tives and the viscosity temperature characteristic of lubricant have a cooperation effect on the fric- tion coefficient in boundary lubrication.展开更多
3C-SiC is a promising structural material for piezoresistive sensors used in high-temperature applications. For sensor development, the preparation of sensor materials and study of its electrical properties, such as r...3C-SiC is a promising structural material for piezoresistive sensors used in high-temperature applications. For sensor development, the preparation of sensor materials and study of its electrical properties, such as resistivity, barrier height of grain boundaries, and temperature coefficient of resistivity, are important in addition to structural properties and these have to be optimized. In the present work, 3C-SiC thin film with in situ doping of nitrogen is prepared through low- pressure chemical vapor deposition by using methyl trichloro silane, ammonia, and hydrogen as precursors. Electrical properties of deposited 3C-SiC thin films with varying nitrogen doping concentration through four probe technique are studied. Atomic force microscopy investigations are carried out to study the grain size on and average root-mean-squared roughness 3C-SiC thin films. A decrease in the degree of crystallinity is observed in nitrogen-doped 3C-SiC thin films. The sheet resistivity of nitrogen-doped 3C-SiC thin film is found to decrease with increase in temperature in the range from 303 to 823 K. The sheet resistivity, average temperature coefficient of resistance, and barrier height of the grain boundaries of film doped with 17 at.% of nitrogen are 0.14 cm, -1.0 x 10-n/K, and 0.01 eV, respectively. Comparing all the nitrogen-doped 3C-SiC thin films, the film doped with 17 at.% of nitrogen exhibits an improved structural and electrical properties and it can be used as sensing material for high-temperature applications.展开更多
Prior austenite grain size dependence of the low temperature impact toughness has been addressed in the bainitic weld metals by in situ observations.Usually,decreasing the grain size is the only approach by which both...Prior austenite grain size dependence of the low temperature impact toughness has been addressed in the bainitic weld metals by in situ observations.Usually,decreasing the grain size is the only approach by which both the strength and the toughness of a steel are increased.However,low carbon bainitic steel with small grain size shows a weakening of the low temperature impact toughness in this study.By direct tracking of the morphological evolution during phase transformation,it is found that large austenite grain size dominates the nucleation of intragranular acicular ferrite,whereas small austenite grain size leads to grain boundary nucleation of bainite.This kinetics information will contribute to meet the increasing low temperature toughness requirement of weld metals for the storage tanks and offshore structures.展开更多
In gas turbine engines,with the existence of the intense forced convection and significant buoyancy effects,temperature distribution and level on turbine or compressor disks affect the heat transfer characteristics st...In gas turbine engines,with the existence of the intense forced convection and significant buoyancy effects,temperature distribution and level on turbine or compressor disks affect the heat transfer characteristics strongly.In this paper,numerical simulations were performed to analyze these influences for a free disk,with the laminar and turbulent flow respectively.The influences of temperature distribution on the heat transfer were observed by using incompressible cooling air,and temperature profiles of nth order monomial and polynomial were assumed on the disk.The analysis revealed that the heat transfer for two flow states on the free disk is determined by the exponent n of the monomial profile when specifying the rotating Reynolds number;for an arbitrary polynomial profile,the local Nusselt number can be deduced from results of monomial profiles.To study the effects of temperature level on heat transfer singly,monomial profiles were used and the local Nusselt number of compressible and incompressible cooling air were compared.And both for two flow states,the following conclusions could be drawn: the relative difference of local Nusselt number is mainly controlled by nondimensional local temperature difference,and almost independent of the monomial's coefficient C,exponent n and the rotating Reynolds number.Subsequently,a correction method for heat transfer of the free disk is presented and verified computationally,with which the local Nusselt number,obtained with a uniform and low temperature profile,can be revised by arbitrary distribution and high temperature magnitude.展开更多
基金Projects(52108148,51878319,51578267)supported by the National Natural Science Foundation of ChinaProject(2021M701483)supported by the China Postdoctoral Research Funding Program+1 种基金Project(2021K574C)supported by the Jiangsu Postdoctoral Research Funding Program,ChinaProject(BK20190833)supported by the Natural Science Foundation of Jiangsu Province,China。
文摘The temperature distribution in laminated beams underging thermal boundary conditions has been investigated.The thermal boundary conditions are general and include various combinations of prescribed heat fluxes and temperatures at the edges.An analytical solution of temperature for the laminated beam is present on the basis of the heat conduction theory in this paper.The proposed method is applicable to the beams with arbitrary thickness and layer numbers.Due to the complexity of the boundary conditions,the temperature field to be determined was considered from two sources.The first part was the temperature field from the complex temperature conditions at two edges of the laminated beam.The solution for the temperature of the first part was constructed to satisfy temperature boundary conditions at two edges.The second part was the temperature field from the upper and lower surface temperatures without taking account of the thermal conditions at two edges.In this part,the exact solution for the temperature was obtained based on the heat conduction theory.The convergence of the solution was examined by analyzing terms of Fourier series.The validity and feasibility of the proposed method was verified by comparing theoretical results with numerical results due to the equivalent single layer approach and the finite element method(FEM).The influences of surface temperatures,beam thicknesses,layer numbers and material properties with respects to the solution of the temperature field of the beam were investigated via a series of parametric studies.
基金Supported by the NNSF of China(11271066)Supported by the grant of Shanghai Education Commission(13ZZ048)
文摘In this paper,we discuss the local existence of H^i(i=2,4)solutions for a 1D compressible viscous micropolar fluid model with non-homogeneous temperature boundary.The proof is based on the local existence of solutions in[1].
基金Funded by the National Natural Science Foundation for Outstanding Young Scholars of China(No.51222405)the National Natural Science Foundation of China(No.51034002)+2 种基金the Fok Ying Tong Education Foundation(No.132002)the Basic Scientific Research Operation of Center University(N120602002,N120502001)the Chinese National Programfor Fundamental Research and Development(No.2011CB610405)
文摘According to the principle of grain refining and slurry preparation by cooling sloping plate process, the distributions of boundary layers during melt treatment by cooling sloping plate were studied, and mathematic model of cooling rate was established. The calculation value approximately agrees with the experimental result. Laminar flow and turbulent flow exist on sloping plate surface commonly. The thickness of velocity boundary layer and the critical transfer distance from laminar flow to turbulent flow increase with the decrease of initial flow velocity. The thickness of temperature boundary layer increases with the increment of flow distance and the decrease of initial flow velocity. The melt cooling rate and melt thickness have an inverse proportion relationship. The melt cooling rate increases along the plate direction gradually when the initial flow velocity is lower than 1 m/s, the melt cooling rate keeps nearly a constant when the initial flow velocity is 1 m/ s, when the initial flow velocity is higher than 1 m/s, the melt cooling rate decreases gradually. The melt cooling rate of cooling sloping plate process can reach 102-103 K/s and belongs to meta-rapid solidification scope.
基金Project(51222509) supported by the National Science Fund for Excellent Young Scholars of ChinaProject(51175429) supported by the National Natural Science Foundation of ChinaProjects(97-QZ-2014,90-QP-2013) supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU) of China
文摘Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we review researches on lightweight metals spun at elevated temperatures since they are difficult to deform at room temperature. These metals include light alloys, such as titanium, magnesium and aluminum alloys, and metal composites. Then, the heating methods used in the hot spinning process and the treatment methods employed for the temperature boundary condition in finite element analyses for the process were discussed. Finally, the future development directions for the hot spinning process of lightweight but difficult-to-deform alloys were highlighted.
基金Project supported by the National Natural Science Foundation of China(Nos.50472009,10474091,50532070)
文摘Heteroepitaxial undoped ZnO films were grown on Si （100） substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ （Sample 1, S1） and 02-800℃ （Sample 2, S2） for 1 h, respectively. The electrical transport characteristics of a ZnO/p-Si heterojunction were investigated. We found two interesting phenomena. First, the temperature coefficients of grain boundary resistances of S 1 were positive （positive temperature coefficients, PTC） while that of both the as-grown sample and S2 were negative （negative temperature coefficients, NTC）. Second, the I-V properties of S2 were similar to those common p-n junctions while that of both the as-grown sample and S 1 had double Schottky barrier behaviors, which were in contradiction with the ideal p-n heterojunction model. Combined with the deep level transient spectra results, this revealed that the concentrations of intrinsic defects in ZnO grains and the densities of interfacial states in ZnO/p-Si heterojunction varied with the different annealing ambiences, which caused the grain boundary barriers in ZnO/p-Si heterojunction to vary. This resulted in adjustment electrical properties ofZnO/p-Si heterojunction that may be suitable in various applications.
文摘The data measured by using the two-disc tester show that the concentration of EP addi- tives and the viscosity temperature characteristic of lubricant have a cooperation effect on the fric- tion coefficient in boundary lubrication.
文摘3C-SiC is a promising structural material for piezoresistive sensors used in high-temperature applications. For sensor development, the preparation of sensor materials and study of its electrical properties, such as resistivity, barrier height of grain boundaries, and temperature coefficient of resistivity, are important in addition to structural properties and these have to be optimized. In the present work, 3C-SiC thin film with in situ doping of nitrogen is prepared through low- pressure chemical vapor deposition by using methyl trichloro silane, ammonia, and hydrogen as precursors. Electrical properties of deposited 3C-SiC thin films with varying nitrogen doping concentration through four probe technique are studied. Atomic force microscopy investigations are carried out to study the grain size on and average root-mean-squared roughness 3C-SiC thin films. A decrease in the degree of crystallinity is observed in nitrogen-doped 3C-SiC thin films. The sheet resistivity of nitrogen-doped 3C-SiC thin film is found to decrease with increase in temperature in the range from 303 to 823 K. The sheet resistivity, average temperature coefficient of resistance, and barrier height of the grain boundaries of film doped with 17 at.% of nitrogen are 0.14 cm, -1.0 x 10-n/K, and 0.01 eV, respectively. Comparing all the nitrogen-doped 3C-SiC thin films, the film doped with 17 at.% of nitrogen exhibits an improved structural and electrical properties and it can be used as sensing material for high-temperature applications.
文摘Prior austenite grain size dependence of the low temperature impact toughness has been addressed in the bainitic weld metals by in situ observations.Usually,decreasing the grain size is the only approach by which both the strength and the toughness of a steel are increased.However,low carbon bainitic steel with small grain size shows a weakening of the low temperature impact toughness in this study.By direct tracking of the morphological evolution during phase transformation,it is found that large austenite grain size dominates the nucleation of intragranular acicular ferrite,whereas small austenite grain size leads to grain boundary nucleation of bainite.This kinetics information will contribute to meet the increasing low temperature toughness requirement of weld metals for the storage tanks and offshore structures.
文摘In gas turbine engines,with the existence of the intense forced convection and significant buoyancy effects,temperature distribution and level on turbine or compressor disks affect the heat transfer characteristics strongly.In this paper,numerical simulations were performed to analyze these influences for a free disk,with the laminar and turbulent flow respectively.The influences of temperature distribution on the heat transfer were observed by using incompressible cooling air,and temperature profiles of nth order monomial and polynomial were assumed on the disk.The analysis revealed that the heat transfer for two flow states on the free disk is determined by the exponent n of the monomial profile when specifying the rotating Reynolds number;for an arbitrary polynomial profile,the local Nusselt number can be deduced from results of monomial profiles.To study the effects of temperature level on heat transfer singly,monomial profiles were used and the local Nusselt number of compressible and incompressible cooling air were compared.And both for two flow states,the following conclusions could be drawn: the relative difference of local Nusselt number is mainly controlled by nondimensional local temperature difference,and almost independent of the monomial's coefficient C,exponent n and the rotating Reynolds number.Subsequently,a correction method for heat transfer of the free disk is presented and verified computationally,with which the local Nusselt number,obtained with a uniform and low temperature profile,can be revised by arbitrary distribution and high temperature magnitude.
