Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking process.However,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demand...Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking process.However,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demands on coke quality in a blast furnace.In a hydrogen-rich blast furnace,the presence of H_(2)O promotes the solution loss reaction.This result improves the reactivity of coke,which is 20%-30%higher in a pure H_(2)O atmosphere than in a pure CO_(2)atmosphere.The activation energy range is 110-300 kJ/mol between coke and CO_(2)and 80-170 kJ/mol between coke and H_(2)O.CO_(2)and H_(2)O are shown to have different effects on coke degradation mechanisms.This review provides a comprehensive overview of the effect of H_(2)O on the structure and properties of coke.By exploring the interactions between H_(2)O and coke,several unresolved issues in the field requiring further research were identified.This review aims to provide valuable insights into coke behavior in hydrogen-rich environments and promote the further development of hydrogen-rich blast furnace ironmaking processes.展开更多
The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the micro...The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.展开更多
In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction m...In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.展开更多
Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with va...Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation process.The total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 min.The asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction period.The asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.展开更多
Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation...Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.展开更多
To explore the iron coke application in hydrogen-rich blast furnace,which is an effective method to achieve the purpose of low carbon emissions,the initial gasification temperature of iron coke in CO_(2) and H_(2)O at...To explore the iron coke application in hydrogen-rich blast furnace,which is an effective method to achieve the purpose of low carbon emissions,the initial gasification temperature of iron coke in CO_(2) and H_(2)O atmosphere and its cogasification reaction mechanism with coke were systematically studied.Iron coke was prepared under laboratory conditions,with a 0-7wt%iron ore powder addition.The properties of iron cokes were tested by coke reactivity index(CRI)and coke strength after reaction(CSR),and their phases and morphology were evolution discussed by scanning electron microscopy and X-ray diffraction analysis.The results indicated that the initial gasification temperature of iron coke decreased with the increase in the iron ore powder content under the CO_(2) and H_(2)O_((g))atmosphere.In the 40vol%H_(2)O+60vol%CO_(2) atmosphere,CRI of iron coke with the addition of 3wt%iron ore powder reached 58.7%,and its CSR reached 56.5%.Because of the catalytic action of iron,the reaction capacity of iron coke was greater than that of coke.As iron coke was preferentially gasified,the CRI and CSR of coke were reduced and increased,respectively,when iron coke and coke were cogasified.The results showed that the skeleton function of the coke can be protected by iron coke.展开更多
One factor that limits development of fundamental research on the infuence of coke microstructure on its strength is the difculty in quantifying the way that microstructure is both classifed and distributed in three d...One factor that limits development of fundamental research on the infuence of coke microstructure on its strength is the difculty in quantifying the way that microstructure is both classifed and distributed in three dimensions.To support such fundamental studies,this study evaluated a novel volumetric approach for classifying small(approx.450μm^(3))blocks of coke microstructure from 3D computed tomography scans.An automated process for classifying microstructure blocks was described.It is based on Landmark Multi-Dimensional Scaling and uses the Bhattacharyya metric and k-means clustering.The approach was evaluated using 27 coke samples across a range of coke with diferent properties and reliably identifed 6 ordered class of coke microstructure based on the distribution of voxel intensities associated with structural density.The lower class(1–2)subblocks tend to be dominated by pores and thin walls.Typically,there is an increase in wall thickness and reduced pore sizes in the higher classes.Inert features are also likely to be seen in higher classes(5–6).In general,this approach provides an efcient automated means for identifying the 3D spatial distribution of microstructure in CT scans of coke.展开更多
Objective The study aimed to estimate the benchmark dose(BMD)of coke oven emissions(COEs)exposure based on mitochondrial damage with the mitochondrial DNA copy number(mtDNAcn)as a biomarker.Methods A total of 782 subj...Objective The study aimed to estimate the benchmark dose(BMD)of coke oven emissions(COEs)exposure based on mitochondrial damage with the mitochondrial DNA copy number(mtDNAcn)as a biomarker.Methods A total of 782 subjects were recruited,including 238 controls and 544 exposed workers.The mtDNAcn of peripheral leukocytes was detected through the real-time fluorescence-based quantitative polymerase chain reaction.Three BMD approaches were used to calculate the BMD of COEs exposure based on the mitochondrial damage and its 95%confidence lower limit(BMDL).Results The mtDNAcn of the exposure group was lower than that of the control group(0.60±0.29 vs.1.03±0.31;P<0.001).A dose-response relationship was shown between the mtDNAcn damage and COEs.Using the Benchmark Dose Software,the occupational exposure limits(OELs)for COEs exposure in males was 0.00190 mg/m^(3).The OELs for COEs exposure using the BBMD were 0.00170 mg/m^(3)for the total population,0.00158 mg/m^(3)for males,and 0.00174 mg/m^(3)for females.In possible risk obtained from animal studies(PROAST),the OELs of the total population,males,and females were 0.00184,0.00178,and 0.00192 mg/m^(3),respectively.Conclusion Based on our conservative estimate,the BMDL of mitochondrial damage caused by COEs is0.002 mg/m^(3).This value will provide a benchmark for determining possible OELs.展开更多
The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant ch...The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.展开更多
Replacing heavy oil with petrol coke can greatly reduce the cost of glass production,but obviously shorten the service life of refractories used in the regenerator checker body of glass tanks.To prolong the service li...Replacing heavy oil with petrol coke can greatly reduce the cost of glass production,but obviously shorten the service life of refractories used in the regenerator checker body of glass tanks.To prolong the service life of the regenerator checker body,the slag chemical composition and alkali-sulfur ratio of glass tanks after using petrol coke and the damage mechanism of the residual magnesia bricks in the regenerator checker body were studied,as well as the corrosion resistance of three magnesia based bricks(direct bonded magnesia chrome bricks,fused rebonded magnesia chrome bricks,and fused rebonded high-purity magnesium aluminate spinel bricks).On this basis,a series of targeted countermeasures were adopted to optimize the configuration of refractories,significantly improving the service life of checker bricks and meeting the requirements of glass industry development.展开更多
The coal packing density on coking chamber was tested under different conditions of moisture during coal charging.The result was studied through comparing with the lab research conditions as well as different mixing-r...The coal packing density on coking chamber was tested under different conditions of moisture during coal charging.The result was studied through comparing with the lab research conditions as well as different mixing-ratios of briquette situation,and the effect of CMC process on the coal packing density was also analyzed.The difference of temperature field and coal carbonization in the coking chamber between CMC and briquette was put forward by testing the center temperature of the coke button.With SCO experiment and mass production experiment,the effect of fine coal,CMC and briquette on coke quality was studied contrastively and some conclusion was made.展开更多
Effect of sulfur impurity on coke reactivity was investigated by simulating petroleum coke with low-impurity pitch coke and impurities doping. And its mechanism was discussed by X-ray diffraction (XRD), scanning elect...Effect of sulfur impurity on coke reactivity was investigated by simulating petroleum coke with low-impurity pitch coke and impurities doping. And its mechanism was discussed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The results show that sulfur has strong catalysis on both air and CO2 reactivity of coke in the case of no other impurity interference. Its catalysis is probably realized by triggering organic sulfur→H2S→SO2→COS and elemental sulfur (Sx)→SO2 and organic sulfur→H2S→COS→Sx→C2S→COS reaction systems during coke?O2 and coke?CO2 reactions, respectively, which are partly circular with functions of increasing carbon consumption and enlarging coke specific surface area.展开更多
Combustion and sulfur retention experiments of mixed fuel of petroleum cokeand coal were conducted on a pilot-scale circulating fluidized bed (CFB) combustor with the thermalinput of 0. 6 MW. The effects of several pa...Combustion and sulfur retention experiments of mixed fuel of petroleum cokeand coal were conducted on a pilot-scale circulating fluidized bed (CFB) combustor with the thermalinput of 0. 6 MW. The effects of several parameters, such as the primary air percentage, excess aircoefficient, bed temperature, Ca/S molar ratio and mass ratio of petroleum coke to coal on SO_2emission were verified. Experimental results show that when the ratio of petroleum coke to coal inthe mixed fuel increases, the SO_2emission increases. The maximum SO_2 emission appears when purecoke burns. The SO_2 concentration in flue gas reduces with the increase in the primary airpercentage, excess air coefficient and Ca/S molar ratio for all kinds of fuel mixtures. Therangebetween 830 t and 850 t is the optimal temperature for sulfur retention during co-firing ofpetroleum coke and coal with the mass ratio R of 1 and 3 in CFB.展开更多
This work aimed at investigating the crucial factor in building and maintaining the combustion front during in-situ combustion(ISC),oxidized coke and pyrolyzed coke.The surface morphologies,elemental contents,and non-...This work aimed at investigating the crucial factor in building and maintaining the combustion front during in-situ combustion(ISC),oxidized coke and pyrolyzed coke.The surface morphologies,elemental contents,and non-isothermal mass losses of the oxidized and pyrolyzed cokes were thoroughly examined.The results indicated that the oxidized coke could be combusted at a lower temperature compared to the pyrolyzed coke due primarily to their differences in the molecular polarity and microstructure.Kinetic triplets of coke combustion were determined using iso-conversional models and one advanced integral master plots method.The activation energy values of the oxidized and pyrolyzed cokes varied in the range of 130-153 k J/mol and 95-120 kJ/mol,respectively.The most appropriate reaction model of combustion of the oxidized and pyrolyzed cokes followed three-dimensional diffusion model(D_(3)) and random nucleation and subsequent growth model(F_(1)),respectively.These observations assisted in building the numerical model of these two types of cokes to simulate the ISC process.展开更多
In this study, the effects of particle size distribution （PSD）, chemical composition and pore structure of petroleum coke on the slurryability of petroleum coke water slurry （PCWS） were investigated. Four petroleu...In this study, the effects of particle size distribution （PSD）, chemical composition and pore structure of petroleum coke on the slurryability of petroleum coke water slurry （PCWS） were investigated. Four petroleum cokes were studied, and they showed completely different slurryability. The solid concentration at fixed viscosity （i.e. apparent viscosity of 1000 mPa） （SCFV） of four PCWSs is different from each other, with the highest value of 70.9%, and lowest of 62.1%. The apparent viscosity of the four PCWSs all increased with an increase of the solid concentration. The results showed that the PSD, inherent moisture content, specific surface area and pore volume of petroleum coke were key factors to affect the slurryability. The slurryability was enhanced with increasing PSD range and particle packing fraction, and with decreasing inherent moisture content, specific surface area and pore volume.展开更多
The coal with low moisture during carbonization could not only increase the yield of coke,but also promote the coke quality and reduce the energy consumption.In this paper,the influence of the moisture in the blend co...The coal with low moisture during carbonization could not only increase the yield of coke,but also promote the coke quality and reduce the energy consumption.In this paper,the influence of the moisture in the blend coal(1.8%10.13%)on the product yields and coke quality during coal carbonization were investigated.The results show that the coke yield is increased from 75.90%to 77.16%,and the coke qualities such as coke strength after reaction with CO2(CSR),coke reactivity index(CRI),fragmentation index(M25)and abrasion index(M10))are also improved when the moisture of the blend coal decreases from 10.13%to 1.80%in a bench scale reactor.Due to the secondary reaction,tar become lighter when the moisture is decreased.In order to further prove the above results,the blend coal with 1.8%and 9%10%(common moisture used in coke plant)moisture is carbonized in a coke oven with 6 m height,the results show that CRI are 23.4%and 27.3%,CRS are 67.1%and 62.2%under 1.8%and 9%10%moisture of blend coal.Moreover,the variation of the moisture in blend coal has a limited influence on dust emission at the ascension pipe and the charging car.展开更多
The mechanism of coke size segregation in the radial direction of pre-chamber in coke dry quenching （CDQ） shaft was investigated by experiment and numerical analysis. The experimental apparatus was a cold three-dime...The mechanism of coke size segregation in the radial direction of pre-chamber in coke dry quenching （CDQ） shaft was investigated by experiment and numerical analysis. The experimental apparatus was a cold three-dimensional semicircle model for bell-type charging, which was used to study the influences of different kinds of bells and different stock line levels on the radial distribution of coke size in the radial direction of a pre-chamber. A mathematical model was used, which is capable of estimating the radial average size distribution as well as the radial deposit distribution of each particle size for multiple size coke with a few fixed parameters. The calculated results agree well with the experimental data, which proves the reliability of both experimental study and numerical analysis.展开更多
In this study, the effects of pH on slurrying properties of petroleum coke water slurry（PCWS） were investigated. The slurrying concentration, rheological characteristics and stability of PCWS were studied with four ...In this study, the effects of pH on slurrying properties of petroleum coke water slurry（PCWS） were investigated. The slurrying concentration, rheological characteristics and stability of PCWS were studied with four different types of additives at pH varying from 5 to 11.The results showed that the slurrying concentration, rheological characteristics and stability of PCWS all increased at first and then decreased with increasing pH from 5 to 11,and a pH of around 9 was found to be the most favorable acid–alkali environment to all these three slurrying properties. It was also indicated that only in a moderate alkaline environment can the additives be active enough to react with particle surfaces sufficiently to obtain good slurrying concentration and form a stable three-dimensional network structure, which can support strong pseudoplastic characteristics and good stability. An acid environment was a very unfavorable factor to the slurrying properties of PCWS.展开更多
The stability of petroleum coke water slurry（PCWS） is currently a hot topic. The inherent relationship between yield stress and stability of bubble-PCWS was studied through orthogonal experiments and range analysis ...The stability of petroleum coke water slurry（PCWS） is currently a hot topic. The inherent relationship between yield stress and stability of bubble-PCWS was studied through orthogonal experiments and range analysis in this work. The results showed that the stability of bubble-PCWS was positively related to the yield stress and that the yield stress could be greatly impacted by the operation conditions during preparation of bubble-PCWS. The main factors affecting the yield stress of bubble-PCWS were solid concentration, aeration time and dosage of frother. However, the effects of aperture size of air distribution plates and type of frother on the yield stress were slight within the experimental range. The optimal conditions for the greatest yield stress were as follows： aeration time of 30 min, solid concentration of 65 wt%, frother dosage of0.030 wt% of the air-dried pulverized petroleum coke, aperture size of air distribution plate of 2-5 lm and AOS frother.The yield stress and the pour rate of bubble-PCWS under this optimum operation condition could reach maxima of more than 0.4 Pa and 96%, respectively.展开更多
The effects of gas composition, temperature, ore to coke ratio and prereduction rate of ore on coke degradation were studied. The results showed that 1% increment in solution loss of coke reduces coke strength by 0.6%...The effects of gas composition, temperature, ore to coke ratio and prereduction rate of ore on coke degradation were studied. The results showed that 1% increment in solution loss of coke reduces coke strength by 0.6%, and the coke degradation is accelerated with the temperature. The higher the temperature, the more coke surface is involved in reactions, and the less negative effect on coke strength is. Hydrogen exerts stronger effect on coke degradation than CO at high temperature. The coke degradation is decreased with the reduction of ore to coke ratio and increase of ore prereduction rate.展开更多
基金financially supported by the Young Elite Scientist Sponsorship Program by CAST(No.YESS20210090)the National Natural Science Foundation of China(No.51974019),Beijing Natural Science Foundation(J210017)China Baowu Low Carbon Metallurgy Innovation Foundation(Nos.BWLCF202119 and BWLCF 202117)。
文摘Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking process.However,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demands on coke quality in a blast furnace.In a hydrogen-rich blast furnace,the presence of H_(2)O promotes the solution loss reaction.This result improves the reactivity of coke,which is 20%-30%higher in a pure H_(2)O atmosphere than in a pure CO_(2)atmosphere.The activation energy range is 110-300 kJ/mol between coke and CO_(2)and 80-170 kJ/mol between coke and H_(2)O.CO_(2)and H_(2)O are shown to have different effects on coke degradation mechanisms.This review provides a comprehensive overview of the effect of H_(2)O on the structure and properties of coke.By exploring the interactions between H_(2)O and coke,several unresolved issues in the field requiring further research were identified.This review aims to provide valuable insights into coke behavior in hydrogen-rich environments and promote the further development of hydrogen-rich blast furnace ironmaking processes.
基金financially supported by the National Science Foundation of China(Nos.51974212 and 52274316)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202116)+1 种基金the Science and Technology Major Project of Wuhan(No.2023020302020572)the Foundation of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(No.FMRUlab23-04)。
文摘The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.
基金supported by the Qingdao Postdoctoral Program Funding(QDBSH20220202045)Shandong provincial Natural Science Foundation(ZR2021ME049,ZR2022ME176)+1 种基金National Natural Science Foundation of China(22078176)Taishan Industrial Experts Program(TSCX202306135).
文摘In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.
文摘Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation process.The total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 min.The asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction period.The asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.
基金the financial support from the National Natural Science Foundation of China (21908010)the Education Department of Jilin Province (JJKH20220694KJ)。
文摘Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.
基金financially supported by the National Natural Science Foundation of China(No.51576164)the Joint Research Fund of China Bao-Wu Iron and Steel Group Company Limited(Nos.U1860108 and U1860203)Science and Technology Commission of Shanghai Municipality,China(Nos.21DZ1208900 and 19DZ2270200)。
文摘To explore the iron coke application in hydrogen-rich blast furnace,which is an effective method to achieve the purpose of low carbon emissions,the initial gasification temperature of iron coke in CO_(2) and H_(2)O atmosphere and its cogasification reaction mechanism with coke were systematically studied.Iron coke was prepared under laboratory conditions,with a 0-7wt%iron ore powder addition.The properties of iron cokes were tested by coke reactivity index(CRI)and coke strength after reaction(CSR),and their phases and morphology were evolution discussed by scanning electron microscopy and X-ray diffraction analysis.The results indicated that the initial gasification temperature of iron coke decreased with the increase in the iron ore powder content under the CO_(2) and H_(2)O_((g))atmosphere.In the 40vol%H_(2)O+60vol%CO_(2) atmosphere,CRI of iron coke with the addition of 3wt%iron ore powder reached 58.7%,and its CSR reached 56.5%.Because of the catalytic action of iron,the reaction capacity of iron coke was greater than that of coke.As iron coke was preferentially gasified,the CRI and CSR of coke were reduced and increased,respectively,when iron coke and coke were cogasified.The results showed that the skeleton function of the coke can be protected by iron coke.
基金the Australian Coal Industry's Research Program(ACARP)-Grant Number C29073.
文摘One factor that limits development of fundamental research on the infuence of coke microstructure on its strength is the difculty in quantifying the way that microstructure is both classifed and distributed in three dimensions.To support such fundamental studies,this study evaluated a novel volumetric approach for classifying small(approx.450μm^(3))blocks of coke microstructure from 3D computed tomography scans.An automated process for classifying microstructure blocks was described.It is based on Landmark Multi-Dimensional Scaling and uses the Bhattacharyya metric and k-means clustering.The approach was evaluated using 27 coke samples across a range of coke with diferent properties and reliably identifed 6 ordered class of coke microstructure based on the distribution of voxel intensities associated with structural density.The lower class(1–2)subblocks tend to be dominated by pores and thin walls.Typically,there is an increase in wall thickness and reduced pore sizes in the higher classes.Inert features are also likely to be seen in higher classes(5–6).In general,this approach provides an efcient automated means for identifying the 3D spatial distribution of microstructure in CT scans of coke.
基金supported by the National Natural Science Foundation of China[grant numbers:NSFC81872597,81001239]。
文摘Objective The study aimed to estimate the benchmark dose(BMD)of coke oven emissions(COEs)exposure based on mitochondrial damage with the mitochondrial DNA copy number(mtDNAcn)as a biomarker.Methods A total of 782 subjects were recruited,including 238 controls and 544 exposed workers.The mtDNAcn of peripheral leukocytes was detected through the real-time fluorescence-based quantitative polymerase chain reaction.Three BMD approaches were used to calculate the BMD of COEs exposure based on the mitochondrial damage and its 95%confidence lower limit(BMDL).Results The mtDNAcn of the exposure group was lower than that of the control group(0.60±0.29 vs.1.03±0.31;P<0.001).A dose-response relationship was shown between the mtDNAcn damage and COEs.Using the Benchmark Dose Software,the occupational exposure limits(OELs)for COEs exposure in males was 0.00190 mg/m^(3).The OELs for COEs exposure using the BBMD were 0.00170 mg/m^(3)for the total population,0.00158 mg/m^(3)for males,and 0.00174 mg/m^(3)for females.In possible risk obtained from animal studies(PROAST),the OELs of the total population,males,and females were 0.00184,0.00178,and 0.00192 mg/m^(3),respectively.Conclusion Based on our conservative estimate,the BMDL of mitochondrial damage caused by COEs is0.002 mg/m^(3).This value will provide a benchmark for determining possible OELs.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51964031 and 52164039)。
文摘The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.
文摘Replacing heavy oil with petrol coke can greatly reduce the cost of glass production,but obviously shorten the service life of refractories used in the regenerator checker body of glass tanks.To prolong the service life of the regenerator checker body,the slag chemical composition and alkali-sulfur ratio of glass tanks after using petrol coke and the damage mechanism of the residual magnesia bricks in the regenerator checker body were studied,as well as the corrosion resistance of three magnesia based bricks(direct bonded magnesia chrome bricks,fused rebonded magnesia chrome bricks,and fused rebonded high-purity magnesium aluminate spinel bricks).On this basis,a series of targeted countermeasures were adopted to optimize the configuration of refractories,significantly improving the service life of checker bricks and meeting the requirements of glass industry development.
文摘The coal packing density on coking chamber was tested under different conditions of moisture during coal charging.The result was studied through comparing with the lab research conditions as well as different mixing-ratios of briquette situation,and the effect of CMC process on the coal packing density was also analyzed.The difference of temperature field and coal carbonization in the coking chamber between CMC and briquette was put forward by testing the center temperature of the coke button.With SCO experiment and mass production experiment,the effect of fine coal,CMC and briquette on coke quality was studied contrastively and some conclusion was made.
基金Project(51374253)supported by the National Natural Science Foundation of China
文摘Effect of sulfur impurity on coke reactivity was investigated by simulating petroleum coke with low-impurity pitch coke and impurities doping. And its mechanism was discussed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The results show that sulfur has strong catalysis on both air and CO2 reactivity of coke in the case of no other impurity interference. Its catalysis is probably realized by triggering organic sulfur→H2S→SO2→COS and elemental sulfur (Sx)→SO2 and organic sulfur→H2S→COS→Sx→C2S→COS reaction systems during coke?O2 and coke?CO2 reactions, respectively, which are partly circular with functions of increasing carbon consumption and enlarging coke specific surface area.
文摘Combustion and sulfur retention experiments of mixed fuel of petroleum cokeand coal were conducted on a pilot-scale circulating fluidized bed (CFB) combustor with the thermalinput of 0. 6 MW. The effects of several parameters, such as the primary air percentage, excess aircoefficient, bed temperature, Ca/S molar ratio and mass ratio of petroleum coke to coal on SO_2emission were verified. Experimental results show that when the ratio of petroleum coke to coal inthe mixed fuel increases, the SO_2emission increases. The maximum SO_2 emission appears when purecoke burns. The SO_2 concentration in flue gas reduces with the increase in the primary airpercentage, excess air coefficient and Ca/S molar ratio for all kinds of fuel mixtures. Therangebetween 830 t and 850 t is the optimal temperature for sulfur retention during co-firing ofpetroleum coke and coal with the mass ratio R of 1 and 3 in CFB.
基金supported by Chinese Postdoctoral Science Foundation (2021M692696)the National Science and Technology Project (2016ZX05058-003-017)Sichuan Science and Technology Program (2021YFH0081)。
文摘This work aimed at investigating the crucial factor in building and maintaining the combustion front during in-situ combustion(ISC),oxidized coke and pyrolyzed coke.The surface morphologies,elemental contents,and non-isothermal mass losses of the oxidized and pyrolyzed cokes were thoroughly examined.The results indicated that the oxidized coke could be combusted at a lower temperature compared to the pyrolyzed coke due primarily to their differences in the molecular polarity and microstructure.Kinetic triplets of coke combustion were determined using iso-conversional models and one advanced integral master plots method.The activation energy values of the oxidized and pyrolyzed cokes varied in the range of 130-153 k J/mol and 95-120 kJ/mol,respectively.The most appropriate reaction model of combustion of the oxidized and pyrolyzed cokes followed three-dimensional diffusion model(D_(3)) and random nucleation and subsequent growth model(F_(1)),respectively.These observations assisted in building the numerical model of these two types of cokes to simulate the ISC process.
基金the financial support from National Key Basic Research Program Project (No. 2010CB227001)
文摘In this study, the effects of particle size distribution （PSD）, chemical composition and pore structure of petroleum coke on the slurryability of petroleum coke water slurry （PCWS） were investigated. Four petroleum cokes were studied, and they showed completely different slurryability. The solid concentration at fixed viscosity （i.e. apparent viscosity of 1000 mPa） （SCFV） of four PCWSs is different from each other, with the highest value of 70.9%, and lowest of 62.1%. The apparent viscosity of the four PCWSs all increased with an increase of the solid concentration. The results showed that the PSD, inherent moisture content, specific surface area and pore volume of petroleum coke were key factors to affect the slurryability. The slurryability was enhanced with increasing PSD range and particle packing fraction, and with decreasing inherent moisture content, specific surface area and pore volume.
基金Project(51706160)supported by the National Natural Science Foundation of ChinaProject(T201906)supported by the Foundation for Outstanding Youth Innovative Research Groups of Higher Education Institution in Hubei Province,China
文摘The coal with low moisture during carbonization could not only increase the yield of coke,but also promote the coke quality and reduce the energy consumption.In this paper,the influence of the moisture in the blend coal(1.8%10.13%)on the product yields and coke quality during coal carbonization were investigated.The results show that the coke yield is increased from 75.90%to 77.16%,and the coke qualities such as coke strength after reaction with CO2(CSR),coke reactivity index(CRI),fragmentation index(M25)and abrasion index(M10))are also improved when the moisture of the blend coal decreases from 10.13%to 1.80%in a bench scale reactor.Due to the secondary reaction,tar become lighter when the moisture is decreased.In order to further prove the above results,the blend coal with 1.8%and 9%10%(common moisture used in coke plant)moisture is carbonized in a coke oven with 6 m height,the results show that CRI are 23.4%and 27.3%,CRS are 67.1%and 62.2%under 1.8%and 9%10%moisture of blend coal.Moreover,the variation of the moisture in blend coal has a limited influence on dust emission at the ascension pipe and the charging car.
文摘The mechanism of coke size segregation in the radial direction of pre-chamber in coke dry quenching （CDQ） shaft was investigated by experiment and numerical analysis. The experimental apparatus was a cold three-dimensional semicircle model for bell-type charging, which was used to study the influences of different kinds of bells and different stock line levels on the radial distribution of coke size in the radial direction of a pre-chamber. A mathematical model was used, which is capable of estimating the radial average size distribution as well as the radial deposit distribution of each particle size for multiple size coke with a few fixed parameters. The calculated results agree well with the experimental data, which proves the reliability of both experimental study and numerical analysis.
基金support from the National Natural Science Foundation of China (No. 51506185)Zhejiang Provincial Natural Science Foundation of China (No. LQ15E060002)
文摘In this study, the effects of pH on slurrying properties of petroleum coke water slurry（PCWS） were investigated. The slurrying concentration, rheological characteristics and stability of PCWS were studied with four different types of additives at pH varying from 5 to 11.The results showed that the slurrying concentration, rheological characteristics and stability of PCWS all increased at first and then decreased with increasing pH from 5 to 11,and a pH of around 9 was found to be the most favorable acid–alkali environment to all these three slurrying properties. It was also indicated that only in a moderate alkaline environment can the additives be active enough to react with particle surfaces sufficiently to obtain good slurrying concentration and form a stable three-dimensional network structure, which can support strong pseudoplastic characteristics and good stability. An acid environment was a very unfavorable factor to the slurrying properties of PCWS.
基金he financial supports from National Natural Science Foundation of China (Grant No. 51506185)Zhejiang Provincial Natural Science Foundation of China (Grant No. LQ15E060002)
文摘The stability of petroleum coke water slurry（PCWS） is currently a hot topic. The inherent relationship between yield stress and stability of bubble-PCWS was studied through orthogonal experiments and range analysis in this work. The results showed that the stability of bubble-PCWS was positively related to the yield stress and that the yield stress could be greatly impacted by the operation conditions during preparation of bubble-PCWS. The main factors affecting the yield stress of bubble-PCWS were solid concentration, aeration time and dosage of frother. However, the effects of aperture size of air distribution plates and type of frother on the yield stress were slight within the experimental range. The optimal conditions for the greatest yield stress were as follows： aeration time of 30 min, solid concentration of 65 wt%, frother dosage of0.030 wt% of the air-dried pulverized petroleum coke, aperture size of air distribution plate of 2-5 lm and AOS frother.The yield stress and the pour rate of bubble-PCWS under this optimum operation condition could reach maxima of more than 0.4 Pa and 96%, respectively.
文摘The effects of gas composition, temperature, ore to coke ratio and prereduction rate of ore on coke degradation were studied. The results showed that 1% increment in solution loss of coke reduces coke strength by 0.6%, and the coke degradation is accelerated with the temperature. The higher the temperature, the more coke surface is involved in reactions, and the less negative effect on coke strength is. Hydrogen exerts stronger effect on coke degradation than CO at high temperature. The coke degradation is decreased with the reduction of ore to coke ratio and increase of ore prereduction rate.
