Rapid development in Information Technology(IT)has allowed several novel application regions like large outdoor vehicular networks for Vehicle-to-Vehicle(V2V)transmission.Vehicular networks give a safe and more effect...Rapid development in Information Technology(IT)has allowed several novel application regions like large outdoor vehicular networks for Vehicle-to-Vehicle(V2V)transmission.Vehicular networks give a safe and more effective driving experience by presenting time-sensitive and location-aware data.The communication occurs directly between V2V and Base Station(BS)units such as the Road Side Unit(RSU),named as a Vehicle to Infrastructure(V2I).However,the frequent topology alterations in VANETs generate several problems with data transmission as the vehicle velocity differs with time.Therefore,the scheme of an effectual routing protocol for reliable and stable communications is significant.Current research demonstrates that clustering is an intelligent method for effectual routing in a mobile environment.Therefore,this article presents a Falcon Optimization Algorithm-based Energy Efficient Communication Protocol for Cluster-based Routing(FOA-EECPCR)technique in VANETS.The FOA-EECPCR technique intends to group the vehicles and determine the shortest route in the VANET.To accomplish this,the FOA-EECPCR technique initially clusters the vehicles using FOA with fitness functions comprising energy,distance,and trust level.For the routing process,the Sparrow Search Algorithm(SSA)is derived with a fitness function that encompasses two variables,namely,energy and distance.A series of experiments have been conducted to exhibit the enhanced performance of the FOA-EECPCR method.The experimental outcomes demonstrate the enhanced performance of the FOA-EECPCR approach over other current methods.展开更多
This paper is aimed at the distributed fault estimation issue associated with the potential loss of actuator efficiency for a type of discrete-time nonlinear systems with sensor saturation.For the distributed estimati...This paper is aimed at the distributed fault estimation issue associated with the potential loss of actuator efficiency for a type of discrete-time nonlinear systems with sensor saturation.For the distributed estimation structure under consideration,an estimation center is not necessary,and the estimator derives its information from itself and neighboring nodes,which fuses the state vector and the measurement vector.In an effort to cut down data conflicts in communication networks,the stochastic communication protocol(SCP)is employed so that the output signals from sensors can be selected.Additionally,a recursive security estimator scheme is created since attackers randomly inject malicious signals into the selected data.On this basis,sufficient conditions for a fault estimator with less conservatism are presented which ensure an upper bound of the estimation error covariance and the mean-square exponential boundedness of the estimating error.Finally,a numerical example is used to show the reliability and effectiveness of the considered distributed estimation algorithm.展开更多
In this paper,an adaptive dynamic programming(ADP)strategy is investigated for discrete-time nonlinear systems with unknown nonlinear dynamics subject to input saturation.To save the communication resources between th...In this paper,an adaptive dynamic programming(ADP)strategy is investigated for discrete-time nonlinear systems with unknown nonlinear dynamics subject to input saturation.To save the communication resources between the controller and the actuators,stochastic communication protocols(SCPs)are adopted to schedule the control signal,and therefore the closed-loop system is essentially a protocol-induced switching system.A neural network(NN)-based identifier with a robust term is exploited for approximating the unknown nonlinear system,and a set of switch-based updating rules with an additional tunable parameter of NN weights are developed with the help of the gradient descent.By virtue of a novel Lyapunov function,a sufficient condition is proposed to achieve the stability of both system identification errors and the update dynamics of NN weights.Then,a value iterative ADP algorithm in an offline way is proposed to solve the optimal control of protocol-induced switching systems with saturation constraints,and the convergence is profoundly discussed in light of mathematical induction.Furthermore,an actor-critic NN scheme is developed to approximate the control law and the proposed performance index function in the framework of ADP,and the stability of the closed-loop system is analyzed in view of the Lyapunov theory.Finally,the numerical simulation results are presented to demonstrate the effectiveness of the proposed control scheme.展开更多
In this paper,a new filtering fusion problem is studied for nonlinear cyber-physical systems under errorvariance constraints and denial-of-service attacks.To prevent data collision and reduce communication cost,the st...In this paper,a new filtering fusion problem is studied for nonlinear cyber-physical systems under errorvariance constraints and denial-of-service attacks.To prevent data collision and reduce communication cost,the stochastic communication protocol is adopted in the sensor-to-filter channels to regulate the transmission order of sensors.Each sensor is allowed to enter the network according to the transmission priority decided by a set of independent and identicallydistributed random variables.From the defenders’view,the occurrence of the denial-of-service attack is governed by the randomly Bernoulli-distributed sequence.At the local filtering stage,a set of variance-constrained local filters are designed where the upper bounds(on the filtering error covariances)are first acquired and later minimized by appropriately designing filter parameters.At the fusion stage,all local estimates and error covariances are combined to develop a variance-constrained fusion estimator under the federated fusion rule.Furthermore,the performance of the fusion estimator is examined by studying the boundedness of the fused error covariance.A simulation example is finally presented to demonstrate the effectiveness of the proposed fusion estimator.展开更多
As the main communication mediums in industrial control networks,industrial communication protocols are always vulnerable to extreme exploitations,and it is very difficult to take protective measures due to their seri...As the main communication mediums in industrial control networks,industrial communication protocols are always vulnerable to extreme exploitations,and it is very difficult to take protective measures due to their serious privacy.Based on the SDN(Software Defined Network)technology,this paper proposes a novel event-based anomaly detection approach to identify misbehaviors using non-public industrial communication protocols,and this approach can be installed in SDN switches as a security software appliance in SDN-based control systems.Furthermore,aiming at the unknown protocol specification and message format,this approach first restructures the industrial communication sessions and merges the payloads from industrial communication packets.After that,the feature selection and event sequence extraction can be carried out by using the N-gram model and K-means algorithm.Based on the obtained event sequences,this approach finally trains an event-based HMM(Hidden Markov Model)to identify aberrant industrial communication behaviors.Experimental results clearly show that the proposed approach has obvious advantages of classification accuracy and detection efficiency.展开更多
The centralized radio access cellular network infrastructure based on centralized Super Base Station(CSBS) is a promising solution to reduce the high construction cost and energy consumption of conventional cellular n...The centralized radio access cellular network infrastructure based on centralized Super Base Station(CSBS) is a promising solution to reduce the high construction cost and energy consumption of conventional cellular networks. With CSBS, the computing resource for communication protocol processing could be managed flexibly according the protocol load to improve the resource efficiency. Since the protocol load changes frequently and may exceed the capacity of processors, load balancing is needed. However, existing load balancing mechanisms used in data centers cannot satisfy the real-time requirement of the communication protocol processing. Therefore, a new computing resource adjustment scheme is proposed for communication protocol processing in the CSBS architecture. First of all, the main principles of protocol processing resource adjustment is concluded, followed by the analysis on the processing resource outage probability that the computing resource becomes inadequate for protocol processing as load changes. Following the adjustment principles, the proposed scheme is designed to reduce the processing resource outage probability based onthe optimized connected graph which is constructed by the approximate Kruskal algorithm. Simulation re-sults show that compared with the conventional load balancing mechanisms, the proposed scheme can reduce the occurrence number of inadequate processing resource and the additional resource consumption of adjustment greatly.展开更多
The rising number of electronic control units (ECUs) in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the ...The rising number of electronic control units (ECUs) in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the explicit calibration protocol (XCP) and J1939 communication protocol to satisfy the need of calibrating multiple ECUs simultaneously. The messages in the controller area network (CAN) are defined in the J1939 protocol. Each CAN node can get its own calibration messages and information from other ECUs, and block other messages by qualifying the CAN messages with priority, source or destination address. The data field of the calibration message is designed with the XCP, with CAN acting as the transport layer. The calibration sessions are setup with the event-triggered XCP driver in the master node and the responding XCP driver in the slave nodes. Mirroring calibration variables from ROM to RAM enables the user to calibrate ECUs online. The application example shows that the multi-ECU calibration system can calibrate multiple ECUs simultaneously, and the main program can also accomplish its calculation and send commands to the actuators in time. By the multi-ECU calibration system, the calibration effort and time can be reduced and the variables in ECU can get a better match with the variables of other ECUs.展开更多
To analyze the security of two-step quantum direct communication protocol (QDCP) by using Einstein-Podolsky Rosen pair proposed by Deng et al. [Phys. Rev. A 68 (2003)042317] in collective-rotation noise channel, a...To analyze the security of two-step quantum direct communication protocol (QDCP) by using Einstein-Podolsky Rosen pair proposed by Deng et al. [Phys. Rev. A 68 (2003)042317] in collective-rotation noise channel, an excellent model of noise analysis is proposed. In the security analysis, the method of the entropy theory is introduced, and is compared with QDCP, an error rate point Qo(M : (Q0, 1.0)) is given. In different noise levels, if Eve wants to obtain the same amount of information, the error rate Q is distinguishable. The larger the noise level ~ is, the larger the error rate Q is. When the noise level ~ is lower than 11%, the high error rate is 0.153 without eavesdropping. Lastly, the security of the proposed protocol is discussed. It turns out that the quantum channel will be safe when Q 〈 0.153. Similarly, if error rate Q〉 0.153 = Q0, eavesdropping information I 〉 1, which means that there exist eavesdroppers in the quantum channel, and the quantum channel will not be safe anymore.展开更多
This paper presents a recovery algorithm for self-stabilizing communication protocols. It first describes some concepts and a formal description method for the algorithm. Then it proposes the algorithm procedures, pro...This paper presents a recovery algorithm for self-stabilizing communication protocols. It first describes some concepts and a formal description method for the algorithm. Then it proposes the algorithm procedures, proves its correctness and analyses its complexity. Finally, it also verifies the availability and efficiency of the algorithm by illustrating an example protocol with multi-processes.展开更多
Most of the public key algorithms used in the exchange of information for power data transmission protocols are RSA. The core of the key part of this kind of algorithm system has not been announced. For the domestic s...Most of the public key algorithms used in the exchange of information for power data transmission protocols are RSA. The core of the key part of this kind of algorithm system has not been announced. For the domestic sensitive information data field, there are threats such as preset backdoors and security vulnerabilities. In response to the above problems, the article introduces a secure communication protocol based on the optimized Secret SM2 algorithm, which uses socket programming to achieve two-way encrypted communication between clients and services, and is able to complete the security protection of data encryption transmission, authentication, data tampering, etc., and proves through experiments that the security protocol is more secure than traditional methods, can effectively identify each other, carry out stable and controllable data encryption transmission, and has good applicability.展开更多
A deep space multi-file delivery protocol(DSMDP) based on LT codes is proposed to reduce the influence of long delay and a high bit error rate(BER) in deep space communication. The protocol increases sending redun...A deep space multi-file delivery protocol(DSMDP) based on LT codes is proposed to reduce the influence of long delay and a high bit error rate(BER) in deep space communication. The protocol increases sending redundancy by LT codes to improve the success rate of file delivery, and adopts different protective strategies for different situations of packet loss. At the same time, the multi-file united delivery strategy is adopted to make full use of the retransmission time to reduce the end-toend transmission delay. Furthermore, the protocol determines the quantity of encoded packets according to the feedback for controlling redundancy. The simulation results show that the proposed protocol can significantly reduce the transmission delay of files, which would be effectively suitable for deep space communication environment of high BER and long delay.展开更多
In this paper, we propose and evaluate outage performance of a mixed amplify-and-forward(AF) and decode-and-forward(DF) relaying protocol in underlay cognitive radio. Different from the conventional AF and DF protocol...In this paper, we propose and evaluate outage performance of a mixed amplify-and-forward(AF) and decode-and-forward(DF) relaying protocol in underlay cognitive radio. Different from the conventional AF and DF protocols, in the proposed protocol, a secondary source attempts to transmit its signal to a secondary destination with help of two secondary relays. One secondary relay always operates in AF mode, while the remaining one always operates in DF mode. Moreover, we also propose a relay selection method, which relies on the decoding status at the DF relay. For performance evaluation and comparison, we derive the exact and approximate closedform expressions of the outage probability for the proposed protocol over Rayleigh fading channel. Finally, we run Monte Carlo simulations to verify the derivations. Results presented that the proposed protocol obtains a diversity order of three and the outage performance of our scheme is between that of the conventional underlay DF protocol and that of the conventional underlay AF protocol.展开更多
This paper discusses the algorithms for achieving global states and self-stabilizationfor communication protocols. It first describes a primary algorithm including its suitability forachieving global states and limita...This paper discusses the algorithms for achieving global states and self-stabilizationfor communication protocols. It first describes a primary algorithm including its suitability forachieving global states and limitation of self-stabilization for communication protocols, and thenpresents an improved algorithm that can be suitable to achieve global states and can be also usedto self-stabilizing communication protocols. Filially, it gives the proof of correctness and analysis ofcomplexity of the improved algorithm, and verifies its availability and efficiency by illustrating anexample protocol.展开更多
This paper investigates formal techniques of protocol based on communicating finite state machines (CFSM). Taking the protocols POLLEND (PE) and ACKNACK (AN) as the examples, the paper discusses the formal description...This paper investigates formal techniques of protocol based on communicating finite state machines (CFSM). Taking the protocols POLLEND (PE) and ACKNACK (AN) as the examples, the paper discusses the formal description, validation and conversion of protocol with the CFSM, presents a protocol validation method and a protocol conversion algorithm based on the CFSM and demonstrates the applicability of the method and the algorithm using the example protocols PE and AN.展开更多
Since communication protocol deals with complex issues related to distribution such as communication, concurrency and synchronization, their development needs to be traced by using sophisticated formal description met...Since communication protocol deals with complex issues related to distribution such as communication, concurrency and synchronization, their development needs to be traced by using sophisticated formal description methods. This paper presents a new hybrid formal method for communication protocol specification. In this method, finite state machine (FSM), communication sequential process (CSP) and abstract data type (ADT) are mixed and the best features of these approaches are offered. In this paper, the main formal description techniques (FDT) for protocol engineering are brieny introduced and a hybrid formal description method based on the FSM, CSP and ADT for communication protocol is described. Finally, this paper presents the formal specification of an example protocol for LAN by using the proposed hybrid formal method. The results of studies show that the hybrid formal description method for communication protocol is an available and effective approach.展开更多
This paper studies the communication protocol and link establishing mode of the mine managing mobile communication system consisted of minute areas. The communication protocol suitable for the system is proposed and d...This paper studies the communication protocol and link establishing mode of the mine managing mobile communication system consisted of minute areas. The communication protocol suitable for the system is proposed and designed.展开更多
The adoption of Internet of Things(IoT)sensing devices is growing rapidly due to their ability to provide realtime services.However,it is constrained by limited data storage and processing power.It offloads its massiv...The adoption of Internet of Things(IoT)sensing devices is growing rapidly due to their ability to provide realtime services.However,it is constrained by limited data storage and processing power.It offloads its massive data stream to edge devices and the cloud for adequate storage and processing.This further leads to the challenges of data outliers,data redundancies,and cloud resource load balancing that would affect the execution and outcome of data streams.This paper presents a review of existing analytics algorithms deployed on IoT-enabled edge cloud infrastructure that resolved the challenges of data outliers,data redundancies,and cloud resource load balancing.The review highlights the problems solved,the results,the weaknesses of the existing algorithms,and the physical and virtual cloud storage servers for resource load balancing.In addition,it discusses the adoption of network protocols that govern the interaction between the three-layer architecture of IoT sensing devices enabled edge cloud and its prevailing challenges.A total of 72 algorithms covering the categories of classification,regression,clustering,deep learning,and optimization have been reviewed.The classification approach has been widely adopted to solve the problem of redundant data,while clustering and optimization approaches are more used for outlier detection and cloud resource allocation.展开更多
The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectr...The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectricity isolation) to transfer measur ment and control information about homing head, gyro and rudder and utilize the digital hand shaking board to build correct communication communication protocol. In order to satisfy the real-time requirement of HLS, this paper first simplifies the aerodynamic data file reasonably, then builds a PC software with C language. The program of the controller part is made with PL/M language. The simulation of HLS based on PC is done with the same sampling period of 10ms as that of YH-F1 and the experiment results are identical to those of digital simulation of the homing anti-tank guided missile.展开更多
Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifun...Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.展开更多
A scheme for three-party quantum secret sharing of a private key is presented with single photons. The agent Bob first prepares a sequence of single photons with two biased bases and then sends them to the boss Alice ...A scheme for three-party quantum secret sharing of a private key is presented with single photons. The agent Bob first prepares a sequence of single photons with two biased bases and then sends them to the boss Alice who checks the security of the transmission with measurements and produces some decoy photons by rearranging the orders of some sample photons. Alice encodes her bits with two unitary operations on the photons and then sends them to the other agent. The security of this scheme is equivalent to that in the modified Bennett Brassard 1984 quantum key distribution protocol. Moreover, each photon can carry one bit of the private key and the intrinsic efficiency for qubits and the total efficiency both approach the maximal value 100% when the number of the bits in the key is very large.展开更多
文摘Rapid development in Information Technology(IT)has allowed several novel application regions like large outdoor vehicular networks for Vehicle-to-Vehicle(V2V)transmission.Vehicular networks give a safe and more effective driving experience by presenting time-sensitive and location-aware data.The communication occurs directly between V2V and Base Station(BS)units such as the Road Side Unit(RSU),named as a Vehicle to Infrastructure(V2I).However,the frequent topology alterations in VANETs generate several problems with data transmission as the vehicle velocity differs with time.Therefore,the scheme of an effectual routing protocol for reliable and stable communications is significant.Current research demonstrates that clustering is an intelligent method for effectual routing in a mobile environment.Therefore,this article presents a Falcon Optimization Algorithm-based Energy Efficient Communication Protocol for Cluster-based Routing(FOA-EECPCR)technique in VANETS.The FOA-EECPCR technique intends to group the vehicles and determine the shortest route in the VANET.To accomplish this,the FOA-EECPCR technique initially clusters the vehicles using FOA with fitness functions comprising energy,distance,and trust level.For the routing process,the Sparrow Search Algorithm(SSA)is derived with a fitness function that encompasses two variables,namely,energy and distance.A series of experiments have been conducted to exhibit the enhanced performance of the FOA-EECPCR method.The experimental outcomes demonstrate the enhanced performance of the FOA-EECPCR approach over other current methods.
基金supported in part by the National Natural Science Foundation of China(62073189,62173207)the Taishan Scholar Project of Shandong Province(tsqn202211129)。
文摘This paper is aimed at the distributed fault estimation issue associated with the potential loss of actuator efficiency for a type of discrete-time nonlinear systems with sensor saturation.For the distributed estimation structure under consideration,an estimation center is not necessary,and the estimator derives its information from itself and neighboring nodes,which fuses the state vector and the measurement vector.In an effort to cut down data conflicts in communication networks,the stochastic communication protocol(SCP)is employed so that the output signals from sensors can be selected.Additionally,a recursive security estimator scheme is created since attackers randomly inject malicious signals into the selected data.On this basis,sufficient conditions for a fault estimator with less conservatism are presented which ensure an upper bound of the estimation error covariance and the mean-square exponential boundedness of the estimating error.Finally,a numerical example is used to show the reliability and effectiveness of the considered distributed estimation algorithm.
基金supported in part by the Australian Research Council Discovery Early Career Researcher Award(DE200101128)Australian Research Council(DP190101557)。
文摘In this paper,an adaptive dynamic programming(ADP)strategy is investigated for discrete-time nonlinear systems with unknown nonlinear dynamics subject to input saturation.To save the communication resources between the controller and the actuators,stochastic communication protocols(SCPs)are adopted to schedule the control signal,and therefore the closed-loop system is essentially a protocol-induced switching system.A neural network(NN)-based identifier with a robust term is exploited for approximating the unknown nonlinear system,and a set of switch-based updating rules with an additional tunable parameter of NN weights are developed with the help of the gradient descent.By virtue of a novel Lyapunov function,a sufficient condition is proposed to achieve the stability of both system identification errors and the update dynamics of NN weights.Then,a value iterative ADP algorithm in an offline way is proposed to solve the optimal control of protocol-induced switching systems with saturation constraints,and the convergence is profoundly discussed in light of mathematical induction.Furthermore,an actor-critic NN scheme is developed to approximate the control law and the proposed performance index function in the framework of ADP,and the stability of the closed-loop system is analyzed in view of the Lyapunov theory.Finally,the numerical simulation results are presented to demonstrate the effectiveness of the proposed control scheme.
基金supported in part by the National Natural Science Foundation of China(62173068,61803074,61703245,61973102,U2030205,61903065,61671109,U1830207,U1830133)the China Postdoctoral Science Foundation(2018M643441,2017M623005)+1 种基金the Royal Society of UKthe Alexander von Humboldt Foundation of Germany。
文摘In this paper,a new filtering fusion problem is studied for nonlinear cyber-physical systems under errorvariance constraints and denial-of-service attacks.To prevent data collision and reduce communication cost,the stochastic communication protocol is adopted in the sensor-to-filter channels to regulate the transmission order of sensors.Each sensor is allowed to enter the network according to the transmission priority decided by a set of independent and identicallydistributed random variables.From the defenders’view,the occurrence of the denial-of-service attack is governed by the randomly Bernoulli-distributed sequence.At the local filtering stage,a set of variance-constrained local filters are designed where the upper bounds(on the filtering error covariances)are first acquired and later minimized by appropriately designing filter parameters.At the fusion stage,all local estimates and error covariances are combined to develop a variance-constrained fusion estimator under the federated fusion rule.Furthermore,the performance of the fusion estimator is examined by studying the boundedness of the fused error covariance.A simulation example is finally presented to demonstrate the effectiveness of the proposed fusion estimator.
基金This work is supported by the Hainan Provincial Natural Science Foundation of China(618QN219)the National Natural Science Foundation of China(Grant No.61501447)the General Project of Scientific Research of Liaoning Provincial Department of Education(LYB201616).
文摘As the main communication mediums in industrial control networks,industrial communication protocols are always vulnerable to extreme exploitations,and it is very difficult to take protective measures due to their serious privacy.Based on the SDN(Software Defined Network)technology,this paper proposes a novel event-based anomaly detection approach to identify misbehaviors using non-public industrial communication protocols,and this approach can be installed in SDN switches as a security software appliance in SDN-based control systems.Furthermore,aiming at the unknown protocol specification and message format,this approach first restructures the industrial communication sessions and merges the payloads from industrial communication packets.After that,the feature selection and event sequence extraction can be carried out by using the N-gram model and K-means algorithm.Based on the obtained event sequences,this approach finally trains an event-based HMM(Hidden Markov Model)to identify aberrant industrial communication behaviors.Experimental results clearly show that the proposed approach has obvious advantages of classification accuracy and detection efficiency.
基金supported in part by the National Science Foundationof China under Grant number 61431001the Beijing Talents Fund under Grant number 2015000021223ZK31
文摘The centralized radio access cellular network infrastructure based on centralized Super Base Station(CSBS) is a promising solution to reduce the high construction cost and energy consumption of conventional cellular networks. With CSBS, the computing resource for communication protocol processing could be managed flexibly according the protocol load to improve the resource efficiency. Since the protocol load changes frequently and may exceed the capacity of processors, load balancing is needed. However, existing load balancing mechanisms used in data centers cannot satisfy the real-time requirement of the communication protocol processing. Therefore, a new computing resource adjustment scheme is proposed for communication protocol processing in the CSBS architecture. First of all, the main principles of protocol processing resource adjustment is concluded, followed by the analysis on the processing resource outage probability that the computing resource becomes inadequate for protocol processing as load changes. Following the adjustment principles, the proposed scheme is designed to reduce the processing resource outage probability based onthe optimized connected graph which is constructed by the approximate Kruskal algorithm. Simulation re-sults show that compared with the conventional load balancing mechanisms, the proposed scheme can reduce the occurrence number of inadequate processing resource and the additional resource consumption of adjustment greatly.
文摘The rising number of electronic control units (ECUs) in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the explicit calibration protocol (XCP) and J1939 communication protocol to satisfy the need of calibrating multiple ECUs simultaneously. The messages in the controller area network (CAN) are defined in the J1939 protocol. Each CAN node can get its own calibration messages and information from other ECUs, and block other messages by qualifying the CAN messages with priority, source or destination address. The data field of the calibration message is designed with the XCP, with CAN acting as the transport layer. The calibration sessions are setup with the event-triggered XCP driver in the master node and the responding XCP driver in the slave nodes. Mirroring calibration variables from ROM to RAM enables the user to calibrate ECUs online. The application example shows that the multi-ECU calibration system can calibrate multiple ECUs simultaneously, and the main program can also accomplish its calculation and send commands to the actuators in time. By the multi-ECU calibration system, the calibration effort and time can be reduced and the variables in ECU can get a better match with the variables of other ECUs.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61472048,61402058,61272511,61472046,61202082 and 61370194the Beijing Natural Science Foundation under Grant No 4152038the China Postdoctoral Science Foundation Funded Project under Grant No 2014M561826
文摘To analyze the security of two-step quantum direct communication protocol (QDCP) by using Einstein-Podolsky Rosen pair proposed by Deng et al. [Phys. Rev. A 68 (2003)042317] in collective-rotation noise channel, an excellent model of noise analysis is proposed. In the security analysis, the method of the entropy theory is introduced, and is compared with QDCP, an error rate point Qo(M : (Q0, 1.0)) is given. In different noise levels, if Eve wants to obtain the same amount of information, the error rate Q is distinguishable. The larger the noise level ~ is, the larger the error rate Q is. When the noise level ~ is lower than 11%, the high error rate is 0.153 without eavesdropping. Lastly, the security of the proposed protocol is discussed. It turns out that the quantum channel will be safe when Q 〈 0.153. Similarly, if error rate Q〉 0.153 = Q0, eavesdropping information I 〉 1, which means that there exist eavesdroppers in the quantum channel, and the quantum channel will not be safe anymore.
基金National Natural Science Foundation of China and NSF of Hubei Province.
文摘This paper presents a recovery algorithm for self-stabilizing communication protocols. It first describes some concepts and a formal description method for the algorithm. Then it proposes the algorithm procedures, proves its correctness and analyses its complexity. Finally, it also verifies the availability and efficiency of the algorithm by illustrating an example protocol with multi-processes.
文摘Most of the public key algorithms used in the exchange of information for power data transmission protocols are RSA. The core of the key part of this kind of algorithm system has not been announced. For the domestic sensitive information data field, there are threats such as preset backdoors and security vulnerabilities. In response to the above problems, the article introduces a secure communication protocol based on the optimized Secret SM2 algorithm, which uses socket programming to achieve two-way encrypted communication between clients and services, and is able to complete the security protection of data encryption transmission, authentication, data tampering, etc., and proves through experiments that the security protocol is more secure than traditional methods, can effectively identify each other, carry out stable and controllable data encryption transmission, and has good applicability.
基金supported by the National Natural Science Foundation of China(61271261)the Natural Science Foundation Project of CQ CSTC(CSTC2012jjA40048)
文摘A deep space multi-file delivery protocol(DSMDP) based on LT codes is proposed to reduce the influence of long delay and a high bit error rate(BER) in deep space communication. The protocol increases sending redundancy by LT codes to improve the success rate of file delivery, and adopts different protective strategies for different situations of packet loss. At the same time, the multi-file united delivery strategy is adopted to make full use of the retransmission time to reduce the end-toend transmission delay. Furthermore, the protocol determines the quantity of encoded packets according to the feedback for controlling redundancy. The simulation results show that the proposed protocol can significantly reduce the transmission delay of files, which would be effectively suitable for deep space communication environment of high BER and long delay.
基金supported by the 2016 research fund of University of Ulsan
文摘In this paper, we propose and evaluate outage performance of a mixed amplify-and-forward(AF) and decode-and-forward(DF) relaying protocol in underlay cognitive radio. Different from the conventional AF and DF protocols, in the proposed protocol, a secondary source attempts to transmit its signal to a secondary destination with help of two secondary relays. One secondary relay always operates in AF mode, while the remaining one always operates in DF mode. Moreover, we also propose a relay selection method, which relies on the decoding status at the DF relay. For performance evaluation and comparison, we derive the exact and approximate closedform expressions of the outage probability for the proposed protocol over Rayleigh fading channel. Finally, we run Monte Carlo simulations to verify the derivations. Results presented that the proposed protocol obtains a diversity order of three and the outage performance of our scheme is between that of the conventional underlay DF protocol and that of the conventional underlay AF protocol.
文摘This paper discusses the algorithms for achieving global states and self-stabilizationfor communication protocols. It first describes a primary algorithm including its suitability forachieving global states and limitation of self-stabilization for communication protocols, and thenpresents an improved algorithm that can be suitable to achieve global states and can be also usedto self-stabilizing communication protocols. Filially, it gives the proof of correctness and analysis ofcomplexity of the improved algorithm, and verifies its availability and efficiency by illustrating anexample protocol.
文摘This paper investigates formal techniques of protocol based on communicating finite state machines (CFSM). Taking the protocols POLLEND (PE) and ACKNACK (AN) as the examples, the paper discusses the formal description, validation and conversion of protocol with the CFSM, presents a protocol validation method and a protocol conversion algorithm based on the CFSM and demonstrates the applicability of the method and the algorithm using the example protocols PE and AN.
文摘Since communication protocol deals with complex issues related to distribution such as communication, concurrency and synchronization, their development needs to be traced by using sophisticated formal description methods. This paper presents a new hybrid formal method for communication protocol specification. In this method, finite state machine (FSM), communication sequential process (CSP) and abstract data type (ADT) are mixed and the best features of these approaches are offered. In this paper, the main formal description techniques (FDT) for protocol engineering are brieny introduced and a hybrid formal description method based on the FSM, CSP and ADT for communication protocol is described. Finally, this paper presents the formal specification of an example protocol for LAN by using the proposed hybrid formal method. The results of studies show that the hybrid formal description method for communication protocol is an available and effective approach.
基金The project supported by Coal Science and Doctor Subject Foundation
文摘This paper studies the communication protocol and link establishing mode of the mine managing mobile communication system consisted of minute areas. The communication protocol suitable for the system is proposed and designed.
文摘The adoption of Internet of Things(IoT)sensing devices is growing rapidly due to their ability to provide realtime services.However,it is constrained by limited data storage and processing power.It offloads its massive data stream to edge devices and the cloud for adequate storage and processing.This further leads to the challenges of data outliers,data redundancies,and cloud resource load balancing that would affect the execution and outcome of data streams.This paper presents a review of existing analytics algorithms deployed on IoT-enabled edge cloud infrastructure that resolved the challenges of data outliers,data redundancies,and cloud resource load balancing.The review highlights the problems solved,the results,the weaknesses of the existing algorithms,and the physical and virtual cloud storage servers for resource load balancing.In addition,it discusses the adoption of network protocols that govern the interaction between the three-layer architecture of IoT sensing devices enabled edge cloud and its prevailing challenges.A total of 72 algorithms covering the categories of classification,regression,clustering,deep learning,and optimization have been reviewed.The classification approach has been widely adopted to solve the problem of redundant data,while clustering and optimization approaches are more used for outlier detection and cloud resource allocation.
文摘The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectricity isolation) to transfer measur ment and control information about homing head, gyro and rudder and utilize the digital hand shaking board to build correct communication communication protocol. In order to satisfy the real-time requirement of HLS, this paper first simplifies the aerodynamic data file reasonably, then builds a PC software with C language. The program of the controller part is made with PL/M language. The simulation of HLS based on PC is done with the same sampling period of 10ms as that of YH-F1 and the experiment results are identical to those of digital simulation of the homing anti-tank guided missile.
文摘Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10604008 and 10435020 and Beijing Education Committee under Grant No XK100270454.
文摘A scheme for three-party quantum secret sharing of a private key is presented with single photons. The agent Bob first prepares a sequence of single photons with two biased bases and then sends them to the boss Alice who checks the security of the transmission with measurements and produces some decoy photons by rearranging the orders of some sample photons. Alice encodes her bits with two unitary operations on the photons and then sends them to the other agent. The security of this scheme is equivalent to that in the modified Bennett Brassard 1984 quantum key distribution protocol. Moreover, each photon can carry one bit of the private key and the intrinsic efficiency for qubits and the total efficiency both approach the maximal value 100% when the number of the bits in the key is very large.