The on-board diagnosis network is the nervous system of high-speed Maglev trains, connecting all controller sensors, and corresponding devices to realize the information acquisition and control. In order to study the ...The on-board diagnosis network is the nervous system of high-speed Maglev trains, connecting all controller sensors, and corresponding devices to realize the information acquisition and control. In order to study the on-board diagnosis network＇s security and reliability, a simulation model for the on-board diagnosis network of high-speed Maglev trains with the optimal network engineering tool （OPNET） was built to analyze the network＇s performance, such as response error and bit error rate on the network load, throughput, and node-state response. The simulation model was verified with an actual on-board diagnosis network structure. The results show that the model results obtained are in good agreement with actual system performance and can be used to achieve actual communication network optimization and control algorithms.展开更多
Along with the introduction of the concept of dual-channel communication,we utilized the finite-difference time-domain（FDTD） method to simulate and measure the radiation pattern under certain plasma densities and pl...Along with the introduction of the concept of dual-channel communication,we utilized the finite-difference time-domain（FDTD） method to simulate and measure the radiation pattern under certain plasma densities and plasma collision frequencies.Results show that under certain settings,the radiation pattern of a plasma antenna resembles that of a metallic antenna.In contrast to a metallic antenna,a plasma antenna possesses other functionalities,such as dynamic reconfiguration and digital controllability.The data from simulation are similar to the measurement results,indicating that column plasma antenna can realize dual-channel communication.This work confirms the viability of realizing dual-channel communication by column plasma antenna,which adds a new but promising method for modern intelligent communication.展开更多
A peculiarity of control network systems is the automatic implementation mode of monitoring and control, without outside intervention in a control process. This mode imposes rigid restrictions upon transmitted data. A...A peculiarity of control network systems is the automatic implementation mode of monitoring and control, without outside intervention in a control process. This mode imposes rigid restrictions upon transmitted data. All circulating data should comply to the defined time interval in which their reliability is definite. In other word communication has to be predictable and time-constrained in order to produce control output in time. This characteristic corresponds to concept 《determinism》 that characterizes an ability of a protocol to guarantee equivalent and opportune network access with the delay not exceeding definite time interval. For development of a deterministic and noise-resistant protocol is necessary to carry out analysis of an error model obtained by the computer simulation of an electromagnetic process in conditions of variety and intensity of interference. The formalization of the error model gives computer simulation an ability to get the error sequence directly without simulation of the electromagnetic process. The results of the simulation of an error sequence can be used for the expediency analysis of a noise-resistant encoding and the analysis of an error-correcting ability.展开更多
Multiple earth observing satellites need to communicate with each other to observe plenty of targets on the Earth together. The factors, such as external interference, result in satellite information interaction delay...Multiple earth observing satellites need to communicate with each other to observe plenty of targets on the Earth together. The factors, such as external interference, result in satellite information interaction delays, which is unable to ensure the integrity and timeliness of the information on decision making for satellites. And the optimization of the planning result is affected. Therefore, the effect of communication delay is considered during the multi-satel ite coordinating process. For this problem, firstly, a distributed cooperative optimization problem for multiple satellites in the delayed communication environment is formulized. Secondly, based on both the analysis of the temporal sequence of tasks in a single satellite and the dynamically decoupled characteristics of the multi-satellite system, the environment information of multi-satellite distributed cooperative optimization is constructed on the basis of the directed acyclic graph（DAG）. Then, both a cooperative optimization decision making framework and a model are built according to the decentralized partial observable Markov decision process（DEC-POMDP）. After that, a satellite coordinating strategy aimed at different conditions of communication delay is mainly analyzed, and a unified processing strategy on communication delay is designed. An approximate cooperative optimization algorithm based on simulated annealing is proposed. Finally, the effectiveness and robustness of the method presented in this paper are verified via the simulation.展开更多
This paper explores the multi-frequency independent channel interference alignment(MFC-IA) system of 3 channels and4 users,and single data stream transmit,i.e.(3×3,1)~4 system.We derive the analytic solution for(...This paper explores the multi-frequency independent channel interference alignment(MFC-IA) system of 3 channels and4 users,and single data stream transmit,i.e.(3×3,1)~4 system.We derive the analytic solution for(3×3,1)~4 MFC-IA system.Based on the analytic solution,an optimization problem is proposed aim at the optimal IA solution.Then based on such a math model,we propose a simulated annealing(SA) algorithm to search optimal IA solution.The simulation results show that the simulated annealing IA algorithm has a better sum rate performance than iterative maximize signal to interference plus noise ratio(Max-SINR) algorithm.This result can be extended to single data stream multi-antenna IA system with 3 antennas and4 users.展开更多
This paper introduces the high-speed electrical multiple unit （EMO） life cycle, including the design, manufacturing, testing, and maintenance stages. It also presents the train control and monitoring system （TCMS）...This paper introduces the high-speed electrical multiple unit （EMO） life cycle, including the design, manufacturing, testing, and maintenance stages. It also presents the train control and monitoring system （TCMS） software development platform, the TCMS testing and verification bench, the EMU driving simulation platform, and the EMU remote data transmittal and maintenance platform. All these platforms and benches combined together make up the EMU life cycle cost （LCC） system. Each platform facilitates EMU LCC management and is an important part of the system.展开更多
The multipath fading channel,models are described in this paper in order to investigate their per-formance for digrtal radio transmissions. The simulation model for such fading channels are focused on thepoints as fol...The multipath fading channel,models are described in this paper in order to investigate their per-formance for digrtal radio transmissions. The simulation model for such fading channels are focused on thepoints as follows: 1) Optimal signal desigu; 2) High-performance receiver design; 3) Communication systemperformance analysis; 4) Reliable high-performance equalizing schemes. Finally, the simulation program of64 QAM digital radio with an adaptive equalizer is desigued and the simulation results are presented to showsome conclusrons we have reached.展开更多
基金supported by the National Natural Science Foundation of China (No. 51007074)the Program for New Century Excellent Talents in University(NECT-08-0825)+1 种基金the Research and Development Project of the National Railway Ministry (2011J016-B)The basic research universities special fund operations(SWJTU11CX141)
文摘The on-board diagnosis network is the nervous system of high-speed Maglev trains, connecting all controller sensors, and corresponding devices to realize the information acquisition and control. In order to study the on-board diagnosis network＇s security and reliability, a simulation model for the on-board diagnosis network of high-speed Maglev trains with the optimal network engineering tool （OPNET） was built to analyze the network＇s performance, such as response error and bit error rate on the network load, throughput, and node-state response. The simulation model was verified with an actual on-board diagnosis network structure. The results show that the model results obtained are in good agreement with actual system performance and can be used to achieve actual communication network optimization and control algorithms.
文摘Along with the introduction of the concept of dual-channel communication,we utilized the finite-difference time-domain（FDTD） method to simulate and measure the radiation pattern under certain plasma densities and plasma collision frequencies.Results show that under certain settings,the radiation pattern of a plasma antenna resembles that of a metallic antenna.In contrast to a metallic antenna,a plasma antenna possesses other functionalities,such as dynamic reconfiguration and digital controllability.The data from simulation are similar to the measurement results,indicating that column plasma antenna can realize dual-channel communication.This work confirms the viability of realizing dual-channel communication by column plasma antenna,which adds a new but promising method for modern intelligent communication.
文摘A peculiarity of control network systems is the automatic implementation mode of monitoring and control, without outside intervention in a control process. This mode imposes rigid restrictions upon transmitted data. All circulating data should comply to the defined time interval in which their reliability is definite. In other word communication has to be predictable and time-constrained in order to produce control output in time. This characteristic corresponds to concept 《determinism》 that characterizes an ability of a protocol to guarantee equivalent and opportune network access with the delay not exceeding definite time interval. For development of a deterministic and noise-resistant protocol is necessary to carry out analysis of an error model obtained by the computer simulation of an electromagnetic process in conditions of variety and intensity of interference. The formalization of the error model gives computer simulation an ability to get the error sequence directly without simulation of the electromagnetic process. The results of the simulation of an error sequence can be used for the expediency analysis of a noise-resistant encoding and the analysis of an error-correcting ability.
基金supported by the National Science Foundation for Young Scholars of China(6130123471401175)
文摘Multiple earth observing satellites need to communicate with each other to observe plenty of targets on the Earth together. The factors, such as external interference, result in satellite information interaction delays, which is unable to ensure the integrity and timeliness of the information on decision making for satellites. And the optimization of the planning result is affected. Therefore, the effect of communication delay is considered during the multi-satel ite coordinating process. For this problem, firstly, a distributed cooperative optimization problem for multiple satellites in the delayed communication environment is formulized. Secondly, based on both the analysis of the temporal sequence of tasks in a single satellite and the dynamically decoupled characteristics of the multi-satellite system, the environment information of multi-satellite distributed cooperative optimization is constructed on the basis of the directed acyclic graph（DAG）. Then, both a cooperative optimization decision making framework and a model are built according to the decentralized partial observable Markov decision process（DEC-POMDP）. After that, a satellite coordinating strategy aimed at different conditions of communication delay is mainly analyzed, and a unified processing strategy on communication delay is designed. An approximate cooperative optimization algorithm based on simulated annealing is proposed. Finally, the effectiveness and robustness of the method presented in this paper are verified via the simulation.
基金supported by the 863 Program of China under Grant No.2015AA01A703the Fundamental Research Funds for the Central Universities under Grant No.2014ZD03-02+1 种基金the National Natural Science Foundation of China(NSFC,No.61171104,61571055)fund of State Key Laboratory of Millimeter Wave(SKL of MMW,No.K201501)
文摘This paper explores the multi-frequency independent channel interference alignment(MFC-IA) system of 3 channels and4 users,and single data stream transmit,i.e.(3×3,1)~4 system.We derive the analytic solution for(3×3,1)~4 MFC-IA system.Based on the analytic solution,an optimization problem is proposed aim at the optimal IA solution.Then based on such a math model,we propose a simulated annealing(SA) algorithm to search optimal IA solution.The simulation results show that the simulated annealing IA algorithm has a better sum rate performance than iterative maximize signal to interference plus noise ratio(Max-SINR) algorithm.This result can be extended to single data stream multi-antenna IA system with 3 antennas and4 users.
文摘This paper introduces the high-speed electrical multiple unit （EMO） life cycle, including the design, manufacturing, testing, and maintenance stages. It also presents the train control and monitoring system （TCMS） software development platform, the TCMS testing and verification bench, the EMU driving simulation platform, and the EMU remote data transmittal and maintenance platform. All these platforms and benches combined together make up the EMU life cycle cost （LCC） system. Each platform facilitates EMU LCC management and is an important part of the system.
文摘The multipath fading channel,models are described in this paper in order to investigate their per-formance for digrtal radio transmissions. The simulation model for such fading channels are focused on thepoints as follows: 1) Optimal signal desigu; 2) High-performance receiver design; 3) Communication systemperformance analysis; 4) Reliable high-performance equalizing schemes. Finally, the simulation program of64 QAM digital radio with an adaptive equalizer is desigued and the simulation results are presented to showsome conclusrons we have reached.
