In order to investigate the effect of solid particles dopants on physicochemical properties of α-PbO2 electrodes, a-PbO2 composite electrodes doped with nano-TiO2 and nano-CeO2 particles were respectively prepared on...In order to investigate the effect of solid particles dopants on physicochemical properties of α-PbO2 electrodes, a-PbO2 composite electrodes doped with nano-TiO2 and nano-CeO2 particles were respectively prepared on A1/conductive coating electrodes in 4 mol/L NaOH solution with addition of PbO until saturation by anodic codeposition. The electrodeposition mechanism, morphology, composition and structure of the composite electrodes were characterized by cyclic voltarnmogram （CV）, SEM, EDAX and XRD. Results show that the doping solid particles can not change reaction mechanism of α-PbO2 electrode in alkaline or acid plating bath, but can improve deposition rate and reduce oxygen evolution potential. The doping solid particles can inhibit the growth of a-PbO2 unit cell and improve specific surface area. The diffraction peak intensity of a-PbO2-CeO2-TiO2 composite electrode is lower than that of pure a-PbO2 electrode. The electrocatalytic activity of a-PbO2-2.12%CEO2-3.71%TIO2 composite electrode is the best. The Guglielmi model for CeO2 and TiO2 codeposition with a-PbO2 is also pronosed.展开更多
Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for...Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for DC-SOFCs is a substantial scientific challenge.Herein we investigated the use of La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3)-δ−Ce_(0.8)Gd_(0.2)O_(1.9)(LSCM−GDC)composite electrodes as anodes for La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(3)-δelectrolyte-based DC-SOFCs,with Camellia oleifera shell char as the carbon fuel.The LSCM−GDC-anode DC-SOFC delivered a maximum power density of 221 mW/cm^(2) at 800℃ and it significantly improved to 425 mW/cm^(2) after Ni nanoparticles were introduced into the LSCM−GDC anode through wet impregnation.The microstructures of the prepared anodes were characterized,and the stability of the anode in a DC-SOFC and the influence of catalytic activity on open circuit voltage were studied.The above results indicate that LSCM–GDC anode is promising to be applied in DC-SOFCs.展开更多
Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surf...Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surface area and mesoporous content than two other composite electrodes.Electrochemical analysis showed that D860/AC M presents higher specific capacitance and electrical double layer capacitor than the others,and significantly lower internal diffusion impedance.Thus,D860/AC M exhibits the highest adsorption capacity and rate of Ⅴ(Ⅳ)among three electrodes.The intra-particle diffusion model fits well in the initial adsorption stage,while the liquid film diffusion model is more suitable for fitting at the later stage.The pseudo-second-order kinetic model is suited for the entire adsorption process.The adsorption of Ⅴ(Ⅳ)on the composite electrode follows that of the Freundlich isotherm.Thermodynamic analysis indicates that the adsorption of Ⅴ(Ⅳ)is an exothermic process with entropy reduction,and the electric field force plays a dominant role in the CDI process.This work aims to improve our understanding of the ion adsorption behaviors and mechanisms on the composite electrodes in CDI.展开更多
The super volume changes and severe mechanical degradation have been a hindrance in the wide application of silicon based composite electrodes in commercial lithium-ion batteries(LIBs).Calendering,one procedure in pro...The super volume changes and severe mechanical degradation have been a hindrance in the wide application of silicon based composite electrodes in commercial lithium-ion batteries(LIBs).Calendering,one procedure in producing LIBs'electrodes,is indispensable to ensure low porosity and energy density.However,the repercussions of the calendering process on the physical characteristics related to the behavior of silicon(Si)based electrodes during the electrochemical reaction have not been well understood.Thus,on account of the deformation characteristic of cantilever electrodes,an in-situ technique is employed to analyze the repercussions of calendering status on the coupled electro-chemo-mechanical performances.During the electrochemical cycling,Young's modulus and diffusion-induced stress in composite electrodes are quantified.The results show that the swelling strain,the stress and the modulus of the Si-based electrode and the calendering degree are positively correlated.Meanwhile,the stress induced by diffusion in the active layer tends to increase in the stage of lithiation and reverses during the delithiation process.Accompany with the SEM analysis,we conclude that the calendering process can induce larger stress,driving the formation of cracks in electrodes.These findings can help understand how the calendering process could affect the capacity dissipating and lifetime of Si based electrodes.展开更多
Stretchable organic light-emitting diodes(OLEDs)are important components for flexible/wearable electronics.However,the efficiency of the existing stretchable OLEDs is still much lower as compared with their rigid coun...Stretchable organic light-emitting diodes(OLEDs)are important components for flexible/wearable electronics.However,the efficiency of the existing stretchable OLEDs is still much lower as compared with their rigid counterparts,one of the main reasons being the lack of ideal flexible transparent electrodes.Herein,we propose and develop a printed embedded metal composite electrode(PEMCE)strategy that enables the fabrication of ultra-thin,highly flexible transparent electrodes with robust mechanical properties.With the flexible transparent electrodes serves as the anodes,flexible/stretchable white OLEDs have been successfully constructed,achieving a current efficiency of up to 77.4 cd A^(-1)and a maximum luminance of 34787 cd m^(-2).The current efficiency of the resulting stretchable OLEDs is the highest ever reported for flexible/stretchable white OLEDs,which is about 1.2 times higher than that of the reference rigid devices based on ITO/glass electrodes.The excellent optoelectronic properties of the printed embedded transparent electrodes and the light extraction effect of the Ag-mesh account for the significant increase in current efficiency.Remarkably,the electroluminescence performance still retains~83%of the original luminance even after bending the device 2000 cycles at a radii of~0.5 mm.More importantly,the device can withstand tensile strains of up to~100%,and even mechanical deformation of 90%tensile strain does not result in a significant loss of electroluminescence performance with current efficiency and luminance maintained at over 85%.The results confirm that the PEMCE strategy is effective for constructing ultra-flexible transparent electrodes,showing great promise for use in a variety of flexible/stretchable electronics.展开更多
1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve t...1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve the mechanical properties of the ionomer in the catalytic layer was used: different inorganic compounds (zeolite,titania and zirconia),having different chemical-physical properties,were selected as inorganic fillers due to their water retention capacity and to act as mechanical reinforce by ...展开更多
A mild and simple synthesis process for large-scale vanadium redox flow batteries(VRFBs)energy storage systems is desirable.A graphite felt/Mn O_2(GF-MNO)composite electrode with excellent electrocatalytic activity to...A mild and simple synthesis process for large-scale vanadium redox flow batteries(VRFBs)energy storage systems is desirable.A graphite felt/Mn O_2(GF-MNO)composite electrode with excellent electrocatalytic activity towards VO^(2+)/VO_2^+redox couples in a VRFB was synthesized by a one-step hydrothermal process.The resulting GF-MNO electrodes possess improved electrochemical kinetic reversibility of the vanadium redox reactions compared to pristine GF electrodes,and the corresponding energy efficiency and discharge capacity at 150 m A cm^(-2)are increased by 12.5%and 40%,respectively.The discharge capacity is maintained at 4.8 A h L^(-1)at the ultrahigh current density of 250 m A cm^(-2).Above all,80%of the energy efficiency of the GF-MNO composite electrodes is retained after 120 charge-discharge cycles at 150 m A cm^(-2).Furthermore,these electrodes demonstrated that more evenly distributed catalytic active sites were obtained from the Mn O_2particles under acidic conditions.The proposed synthetic route is facile,and the raw materials are low cost and environmentally friendly.Therefore,these novel GF-MNO electrodes hold great promise in large-scale vanadium redox flow battery energy storage systems.展开更多
The variation of the effective modulus of silicon composite electrodes,which is a fundamental feature to analyze the coupled mechanical–electrochemical behavior of Si-based electrodes in high-capacity lithium-ion bat...The variation of the effective modulus of silicon composite electrodes,which is a fundamental feature to analyze the coupled mechanical–electrochemical behavior of Si-based electrodes in high-capacity lithium-ion batteries,remains qualitatively controversial.To clarify the contradictory experimental results,numerical modeling of a representative volume element with silicon particles,carbon-binder domains(CBDs),and pores has been performed for the lithiation process.The key parameters for modulus variation were identified and evaluated.A mesostructure change is proposed to be a crucial mechanism that affects the modulus variation,and silicon softening is another key mechanism.Silicon softening and the decreasing CBD volume fraction collectively result in a decrease in the effective modulus of the composite,whereas an increase in the silicon volume fraction along with a decrease in porosity has the opposite effect.The findings of this work provide an in-depth and fundamental understanding of the mechanical properties of silicon composite electrodes.展开更多
Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we ...Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we propose a transparent conducting oxide(TCO)and low-cost metal composite electrode to improve the stability of PSCs without sacrificing the efficiency.The TCO can block ion migrations and chemical reactions between the metal and perovskite,while the metal greatly enhances the conductivity of the composite electrode.As a result,composite electrode-PSCs achieved a power conversion efficiency(PCE)of 23.7%(certified 23.2%)and exhibited excellent stability,maintaining 95%of the initial PCE when applying a reverse bias of 4.0 V for 60 s and over 92%of the initial PCE after 1000 h continuous light soaking.This composite electrode strategy can be extended to different combinations of TCOs and metals.It opens a new avenue for improving the stability of PSCs.展开更多
Lithium-ion batteries with composite anodes of graphite and silicon are increasingly being used. However, their degradation pathways are complicated due to the blended nature of the electrodes, with graphite and silic...Lithium-ion batteries with composite anodes of graphite and silicon are increasingly being used. However, their degradation pathways are complicated due to the blended nature of the electrodes, with graphite and silicon degrading at different rates. Here, we develop a deep learning health diagnostic framework to rapidly quantify and separate the different degradation rates of graphite and silicon in composite anodes using partial charging data. The convolutional neural network (CNN), trained with synthetic data, uses experimental partial charging data to diagnose electrode-level health of tested batteries, with errors of less than 3.1% (corresponding to the loss of active material reaching ∼75%). Sensitivity analysis of the capacity-voltage curve under different degradation modes is performed to provide a physically informed voltage window for diagnostics with partial charging data. By using the gradient-weighted class activation mapping approach, we provide explainable insights into how these CNNs work;highlighting regions of the voltage-curve to which they are most sensitive. Robustness is validated by introducing noise to the data, with no significant negative impact on the diagnostic accuracy for noise levels below 10 mV, thus highlighting the potential for deep learning approaches in the diagnostics of lithium-ion battery performance under real-world conditions. The framework presented here can be generalised to other cell formats and chemistries, providing robust and explainable battery diagnostics for both conventional single material electrodes, but also the more challenging composite electrodes.展开更多
Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique...Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique. The effects of current density on the chemical composition, electrocatalytic activity, and stability of the composite anode material were investigated by energy dispersive X-ray spectroscopy（EDXS）, anode polarization curves, quasi-stationary polarization（Tafel） curves, electrochemical impedance spectroscopy（EIS）, scanning electron microscopy（SEM）, and X-ray diffraction（XRD）. Results reveal that the composite electrode obtained at 1 A/dm2 possesses the lowest overpotential（0.610 V at 500 A/m2） for oxygen evolution, the best electrocatalytic activity, the longest service life（360 h at 40 °C in 150 g/L H2SO4 solution under 2 A/cm2）, and the lowest cell voltage（2.75 V at 500 A/m2）. Furthermore, with increasing current density, the coating exhibits grain growth and the decrease of content of Mn O2. Only a slight effect on crystalline structure is observed.展开更多
Particle based models of composite anodes are useful tools for exploring the behavior of SOFC systems. As part of our efforts to develop models for understanding fuel cells, we have been building models of Ni-YSZ comp...Particle based models of composite anodes are useful tools for exploring the behavior of SOFC systems. As part of our efforts to develop models for understanding fuel cells, we have been building models of Ni-YSZ composite anodes using experimentally measured particle size distributions. The objectives of this study were to characterize the percolation threshold and conductivity of these models in comparison to simpler mono dispersed and biphasic particle size distributions from the literature. We found that the average values for the onset of percolation and the measured conductivity of the models with experimentally measured particle size distributions are similar to those for the simple distributions and the experimentally measured distributions. For all of the configurations evaluated, the onset of percolation in the Nickel phase occurred at a solid fraction of Nickel between 20% and 25%. This corresponded almost exactly to the point at which the coordination number between Nickel phase particles reached 2.2. The significant finding was that the variation in the value for the conductivity, as measured by the standard deviation of the results, was several orders of magnitude higher than for the simpler systems. We explored the validity of our assumptions, specifically the assumption of random particle placement, by building a particle model directly from FIB-SEM data. In this reconstruction, it was clear that the location of particles was not random. Particles of the same type and size had much likelihood of contact higher than would indicated by random location.展开更多
The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great break...The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.展开更多
Taking the nano-sized carbon black and aniline monomer as precursor and （NH4）2S2O6 as oxidant, the well coated C/polyaniline（C/PANI） composite materials were prepared by in situ polymerization of the aniline on th...Taking the nano-sized carbon black and aniline monomer as precursor and （NH4）2S2O6 as oxidant, the well coated C/polyaniline（C/PANI） composite materials were prepared by in situ polymerization of the aniline on the surface of well-dispersed nano-sized carbon black for supercapacitor. The micro-structure of the C/PANI composite electrode materials were analyzed by SEM. The electrochemical properties of C/ PANI and PANI composite electrode were characterized by means of the galvanostatic charge-discharge experiment, cyclic voltammetric measurement and impedance spectroscopy analysis. The results show that by adding the nano-sized carbon black in the process of chemical polymerization of the aniline, the polyaniline can be in situ polymerized and well-coated onto the carbon black particles, which may effectively improve the aggregation of particles and the electrolyte penetration. What’s more , the maximum of specific capacitance of C/PANI electrode 437.6F·g -1 can be attained. Compared with PANI electrode, C/PANI electrode shows more desired capacitance characteristics, smaller internal resistance and better cycle performance.展开更多
This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydroth...This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy reveal that MnO2 nanosheets homogeneously grow onto the surface of micro-HC to form a loose-packed microstructure. The quantity of MnO2 required in the electrode layer has thereby been reduced significantly, and higher specific capacitances have been achieved. The micro-HC/nano-MnO2 electrode presents a high capacitance of 239.0 F g-1 at a current density of 5 m A cm-2, which is a strong promise for high-rate electrochemical capacitive energy storage applications.展开更多
This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of ...This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy(SEM) and transmission electron microscopy(TEM) revealed that MnO2nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO2active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO2composite presented high capacitance of 181 F g-1and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na2SO4solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.展开更多
The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transp...The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transportation, and the microstructure characteristics of the electrode. The efficient thickness, which is defined as the electrode thickness corresponding to the minimum electrode polarization resistance, is formulated as a function of charge transfer resistivity, effective resistivity to ion and electron transport, and three-phase boundary length per unit volume. The model prediction is compared with the experimental reports to check the validity. Simulation is performed to show the effect of microstructure, intrinsic material properties, and electrode reaction mechanism on the efficient thickness. The results suggest that when an electrode is fabricated, its thickness should be controlled regarding its composition, particle size of its components, the intrinsic ionic and electronic conductivities,and its reaction mechanisms as well as the expected operation temperatures. The sensitivity of electrode polarization resistance to its thickness is also discussed.展开更多
Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy...Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy （SEM） images revealed that dense and uniform Au-Pt particles with 25-nm diameter were dispersed on SnO2 film. X-ray photoelectron spectroscopy （XPS） results proved that there was an interaction between Au-Pt nanoparticles and SnO2 support. Electrochemical experiments showed that Au-Pt/SnOz/GC composite electrode had a good electrocatalytic activity to the oxidation of methanol展开更多
Ordered films were made by casting a mixture of aqueous dispersions of didodecyldimethylammonium bromide (DDAB)-clay composite and myoglobin (Mb) solution on pyrolytic graphite (PG) electrodes. The Mb-DDAB-clay film e...Ordered films were made by casting a mixture of aqueous dispersions of didodecyldimethylammonium bromide (DDAB)-clay composite and myoglobin (Mb) solution on pyrolytic graphite (PG) electrodes. The Mb-DDAB-clay film electrodes showed stable and reversible cyclic voltammetric responses in buffers and can catalyze the reduction of id (TCA).展开更多
A novel amperometric biosensor for the detection of hydrogen peroxide is described. The biosensor was constructed by electrodepositing HRP/PPy membrane on the surface of ferrocenecarboxylic acid mediated sol-gel deriv...A novel amperometric biosensor for the detection of hydrogen peroxide is described. The biosensor was constructed by electrodepositing HRP/PPy membrane on the surface of ferrocenecarboxylic acid mediated sol-gel derived composite carbon electrode. The biosensor gives response to hydrogen peroxide in a few seconds with detection limit of 5×10-7 mol·L-1 （based on signal : noise=3）. Linear range is up to 0.2 mmol·L-1.展开更多
基金Project(51004056) supported by the National Natural Science Foundation of ChinaProject(KKZ6201152009) supported by the Opening Foundation of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences+2 种基金Project(2010ZC052) supported by the Applied Basic Research Foundation of Yunnan Province,ChinaProject(20125314110011) supported by the Specialized Research Fund for the Doctoral Program of Higher EducationProject(2010247) supported by Analysis & Testing Foundation of Kunming University of Science and Technology,China
文摘In order to investigate the effect of solid particles dopants on physicochemical properties of α-PbO2 electrodes, a-PbO2 composite electrodes doped with nano-TiO2 and nano-CeO2 particles were respectively prepared on A1/conductive coating electrodes in 4 mol/L NaOH solution with addition of PbO until saturation by anodic codeposition. The electrodeposition mechanism, morphology, composition and structure of the composite electrodes were characterized by cyclic voltarnmogram （CV）, SEM, EDAX and XRD. Results show that the doping solid particles can not change reaction mechanism of α-PbO2 electrode in alkaline or acid plating bath, but can improve deposition rate and reduce oxygen evolution potential. The doping solid particles can inhibit the growth of a-PbO2 unit cell and improve specific surface area. The diffraction peak intensity of a-PbO2-CeO2-TiO2 composite electrode is lower than that of pure a-PbO2 electrode. The electrocatalytic activity of a-PbO2-2.12%CEO2-3.71%TIO2 composite electrode is the best. The Guglielmi model for CeO2 and TiO2 codeposition with a-PbO2 is also pronosed.
基金Project(2019YFC1907405)supported by the National Key R&D Program of ChinaProject(GJJ200809)supported by the Education Department Project Fund of Jiangxi Province,ChinaProject(2020BAB214021)supported by the Natural Science Foundation of Jiangxi Province,China。
文摘Direct carbon solid oxide fuel cells(DC-SOFCs)are promising,green,and efficient power-generating devices that are fueled by solid carbons and comprise all-solid-state structures.Developing suitable anode materials for DC-SOFCs is a substantial scientific challenge.Herein we investigated the use of La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3)-δ−Ce_(0.8)Gd_(0.2)O_(1.9)(LSCM−GDC)composite electrodes as anodes for La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(3)-δelectrolyte-based DC-SOFCs,with Camellia oleifera shell char as the carbon fuel.The LSCM−GDC-anode DC-SOFC delivered a maximum power density of 221 mW/cm^(2) at 800℃ and it significantly improved to 425 mW/cm^(2) after Ni nanoparticles were introduced into the LSCM−GDC anode through wet impregnation.The microstructures of the prepared anodes were characterized,and the stability of the anode in a DC-SOFC and the influence of catalytic activity on open circuit voltage were studied.The above results indicate that LSCM–GDC anode is promising to be applied in DC-SOFCs.
基金financially supported by the National Natural Science Foundation of China(No.51874222).
文摘Composite electrodes prepared by cation exchange resins and activated carbon(AC)were used to adsorb Ⅴ(Ⅳ)in capacitive deionization(CDI).The electrode made of middle resin size(D860/AC M)had the largest specific surface area and mesoporous content than two other composite electrodes.Electrochemical analysis showed that D860/AC M presents higher specific capacitance and electrical double layer capacitor than the others,and significantly lower internal diffusion impedance.Thus,D860/AC M exhibits the highest adsorption capacity and rate of Ⅴ(Ⅳ)among three electrodes.The intra-particle diffusion model fits well in the initial adsorption stage,while the liquid film diffusion model is more suitable for fitting at the later stage.The pseudo-second-order kinetic model is suited for the entire adsorption process.The adsorption of Ⅴ(Ⅳ)on the composite electrode follows that of the Freundlich isotherm.Thermodynamic analysis indicates that the adsorption of Ⅴ(Ⅳ)is an exothermic process with entropy reduction,and the electric field force plays a dominant role in the CDI process.This work aims to improve our understanding of the ion adsorption behaviors and mechanisms on the composite electrodes in CDI.
基金supported by the National Natural Science Foundation of China(Grant Nos.12102264).
文摘The super volume changes and severe mechanical degradation have been a hindrance in the wide application of silicon based composite electrodes in commercial lithium-ion batteries(LIBs).Calendering,one procedure in producing LIBs'electrodes,is indispensable to ensure low porosity and energy density.However,the repercussions of the calendering process on the physical characteristics related to the behavior of silicon(Si)based electrodes during the electrochemical reaction have not been well understood.Thus,on account of the deformation characteristic of cantilever electrodes,an in-situ technique is employed to analyze the repercussions of calendering status on the coupled electro-chemo-mechanical performances.During the electrochemical cycling,Young's modulus and diffusion-induced stress in composite electrodes are quantified.The results show that the swelling strain,the stress and the modulus of the Si-based electrode and the calendering degree are positively correlated.Meanwhile,the stress induced by diffusion in the active layer tends to increase in the stage of lithiation and reverses during the delithiation process.Accompany with the SEM analysis,we conclude that the calendering process can induce larger stress,driving the formation of cracks in electrodes.These findings can help understand how the calendering process could affect the capacity dissipating and lifetime of Si based electrodes.
基金National Natural Science Foundation of China,Grant/Award Numbers:21835003,21422402,21674050,62005126National Key Basic Research Program of China,Grant/Award Numbers:2014CB648300,2017YFB0404501+7 种基金Natural Science Foundation of Jiangsu Province,Grant/Award Numbers:BE2019120,BK20140060Program for Jiangsu Specially-Appointed Professor,Grant/Award Number:RK030STP15001Six Talent Peaks Project of Jiangsu Province,Grant/Award Number:TD-XCL-009333 Project of Jiangsu Province,Grant/Award Number:BRA2017402Leading Talent of Technological Innovation of National Ten-Thousands Talents Program of ChinaExcellent Scientific and Technological Innovative Teams of Jiangsu Higher Education Institutions,Grant/Award Number:TJ217038NUPT Scientific Foundation,Grant/Award Number:NY220152Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Stretchable organic light-emitting diodes(OLEDs)are important components for flexible/wearable electronics.However,the efficiency of the existing stretchable OLEDs is still much lower as compared with their rigid counterparts,one of the main reasons being the lack of ideal flexible transparent electrodes.Herein,we propose and develop a printed embedded metal composite electrode(PEMCE)strategy that enables the fabrication of ultra-thin,highly flexible transparent electrodes with robust mechanical properties.With the flexible transparent electrodes serves as the anodes,flexible/stretchable white OLEDs have been successfully constructed,achieving a current efficiency of up to 77.4 cd A^(-1)and a maximum luminance of 34787 cd m^(-2).The current efficiency of the resulting stretchable OLEDs is the highest ever reported for flexible/stretchable white OLEDs,which is about 1.2 times higher than that of the reference rigid devices based on ITO/glass electrodes.The excellent optoelectronic properties of the printed embedded transparent electrodes and the light extraction effect of the Ag-mesh account for the significant increase in current efficiency.Remarkably,the electroluminescence performance still retains~83%of the original luminance even after bending the device 2000 cycles at a radii of~0.5 mm.More importantly,the device can withstand tensile strains of up to~100%,and even mechanical deformation of 90%tensile strain does not result in a significant loss of electroluminescence performance with current efficiency and luminance maintained at over 85%.The results confirm that the PEMCE strategy is effective for constructing ultra-flexible transparent electrodes,showing great promise for use in a variety of flexible/stretchable electronics.
文摘1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve the mechanical properties of the ionomer in the catalytic layer was used: different inorganic compounds (zeolite,titania and zirconia),having different chemical-physical properties,were selected as inorganic fillers due to their water retention capacity and to act as mechanical reinforce by ...
基金supported by the Ministry of Science and Technology of China (2016YFA0202500)the National Natural Science Foundation of China (51772093)the National key Research and Development Program of China (2017YFD0301507)
文摘A mild and simple synthesis process for large-scale vanadium redox flow batteries(VRFBs)energy storage systems is desirable.A graphite felt/Mn O_2(GF-MNO)composite electrode with excellent electrocatalytic activity towards VO^(2+)/VO_2^+redox couples in a VRFB was synthesized by a one-step hydrothermal process.The resulting GF-MNO electrodes possess improved electrochemical kinetic reversibility of the vanadium redox reactions compared to pristine GF electrodes,and the corresponding energy efficiency and discharge capacity at 150 m A cm^(-2)are increased by 12.5%and 40%,respectively.The discharge capacity is maintained at 4.8 A h L^(-1)at the ultrahigh current density of 250 m A cm^(-2).Above all,80%of the energy efficiency of the GF-MNO composite electrodes is retained after 120 charge-discharge cycles at 150 m A cm^(-2).Furthermore,these electrodes demonstrated that more evenly distributed catalytic active sites were obtained from the Mn O_2particles under acidic conditions.The proposed synthetic route is facile,and the raw materials are low cost and environmentally friendly.Therefore,these novel GF-MNO electrodes hold great promise in large-scale vanadium redox flow battery energy storage systems.
基金supported by the National Natural Science Foundation of China (Grant Nos.12072183,11872236 and 12172205)the Key Research Project of Zhejiang Laboratory (No.2021PE0AC02).
文摘The variation of the effective modulus of silicon composite electrodes,which is a fundamental feature to analyze the coupled mechanical–electrochemical behavior of Si-based electrodes in high-capacity lithium-ion batteries,remains qualitatively controversial.To clarify the contradictory experimental results,numerical modeling of a representative volume element with silicon particles,carbon-binder domains(CBDs),and pores has been performed for the lithiation process.The key parameters for modulus variation were identified and evaluated.A mesostructure change is proposed to be a crucial mechanism that affects the modulus variation,and silicon softening is another key mechanism.Silicon softening and the decreasing CBD volume fraction collectively result in a decrease in the effective modulus of the composite,whereas an increase in the silicon volume fraction along with a decrease in porosity has the opposite effect.The findings of this work provide an in-depth and fundamental understanding of the mechanical properties of silicon composite electrodes.
基金supported by National Natural Science Foundation of China(No.21872080)National Key Research and Development Program of China(2022YFB3803304)+2 种基金supported by Tsinghua University Initiative Scientific Research Program(20221080065,20223080044)The State Key Laboratory of Power System and Generation Equipment(Nos.SKLD21Z03 and SKLD20M03)the Chinese Thousand Talents Program for Young Professionals.
文摘Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we propose a transparent conducting oxide(TCO)and low-cost metal composite electrode to improve the stability of PSCs without sacrificing the efficiency.The TCO can block ion migrations and chemical reactions between the metal and perovskite,while the metal greatly enhances the conductivity of the composite electrode.As a result,composite electrode-PSCs achieved a power conversion efficiency(PCE)of 23.7%(certified 23.2%)and exhibited excellent stability,maintaining 95%of the initial PCE when applying a reverse bias of 4.0 V for 60 s and over 92%of the initial PCE after 1000 h continuous light soaking.This composite electrode strategy can be extended to different combinations of TCOs and metals.It opens a new avenue for improving the stability of PSCs.
基金supported by the EPSRC Impact Acceleration Award(EP/X52556X/1)the Faraday Institution's Industrial Fellowship(FIIF-013)+2 种基金the EPSRC Faraday Institution's Multi-Scale Modelling Project(EP/S003053/1,grant number FIRG003)the EPSRC Joint UK-India Clean Energy Center(JUICE)(EP/P003605/1)the EPSRC Integrated Development of Low-Carbon Energy Systems(IDLES)project(EP/R045518/1).
文摘Lithium-ion batteries with composite anodes of graphite and silicon are increasingly being used. However, their degradation pathways are complicated due to the blended nature of the electrodes, with graphite and silicon degrading at different rates. Here, we develop a deep learning health diagnostic framework to rapidly quantify and separate the different degradation rates of graphite and silicon in composite anodes using partial charging data. The convolutional neural network (CNN), trained with synthetic data, uses experimental partial charging data to diagnose electrode-level health of tested batteries, with errors of less than 3.1% (corresponding to the loss of active material reaching ∼75%). Sensitivity analysis of the capacity-voltage curve under different degradation modes is performed to provide a physically informed voltage window for diagnostics with partial charging data. By using the gradient-weighted class activation mapping approach, we provide explainable insights into how these CNNs work;highlighting regions of the voltage-curve to which they are most sensitive. Robustness is validated by introducing noise to the data, with no significant negative impact on the diagnostic accuracy for noise levels below 10 mV, thus highlighting the potential for deep learning approaches in the diagnostics of lithium-ion battery performance under real-world conditions. The framework presented here can be generalised to other cell formats and chemistries, providing robust and explainable battery diagnostics for both conventional single material electrodes, but also the more challenging composite electrodes.
基金Projects(51004056,51004057)supported by the National Natural Science Foundation of ChinaProject(KKZ6201152009)supported by the Opening Foundation of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences+2 种基金Project(2010ZC052)supported by the Applied Basic Research Foundation of Yunnan Province,ChinaProject(20125314110011)supported by the Specialized Research Fund for the Doctoral Program of Higher Education,ChinaProject(2010247)supported by Analysis&Testing Foundation of Kunming University of Science and Technology,China
文摘Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique. The effects of current density on the chemical composition, electrocatalytic activity, and stability of the composite anode material were investigated by energy dispersive X-ray spectroscopy（EDXS）, anode polarization curves, quasi-stationary polarization（Tafel） curves, electrochemical impedance spectroscopy（EIS）, scanning electron microscopy（SEM）, and X-ray diffraction（XRD）. Results reveal that the composite electrode obtained at 1 A/dm2 possesses the lowest overpotential（0.610 V at 500 A/m2） for oxygen evolution, the best electrocatalytic activity, the longest service life（360 h at 40 °C in 150 g/L H2SO4 solution under 2 A/cm2）, and the lowest cell voltage（2.75 V at 500 A/m2）. Furthermore, with increasing current density, the coating exhibits grain growth and the decrease of content of Mn O2. Only a slight effect on crystalline structure is observed.
基金partially supported through a MURI from the United States Office of Naval Research
文摘Particle based models of composite anodes are useful tools for exploring the behavior of SOFC systems. As part of our efforts to develop models for understanding fuel cells, we have been building models of Ni-YSZ composite anodes using experimentally measured particle size distributions. The objectives of this study were to characterize the percolation threshold and conductivity of these models in comparison to simpler mono dispersed and biphasic particle size distributions from the literature. We found that the average values for the onset of percolation and the measured conductivity of the models with experimentally measured particle size distributions are similar to those for the simple distributions and the experimentally measured distributions. For all of the configurations evaluated, the onset of percolation in the Nickel phase occurred at a solid fraction of Nickel between 20% and 25%. This corresponded almost exactly to the point at which the coordination number between Nickel phase particles reached 2.2. The significant finding was that the variation in the value for the conductivity, as measured by the standard deviation of the results, was several orders of magnitude higher than for the simpler systems. We explored the validity of our assumptions, specifically the assumption of random particle placement, by building a particle model directly from FIB-SEM data. In this reconstruction, it was clear that the location of particles was not random. Particles of the same type and size had much likelihood of contact higher than would indicated by random location.
基金supported by the Programs of National 973 (2011CB935900)NSFC (51231003 and 21231005)+1 种基金111 Project (B12015)Tianjin High-Tech (10SYSYJC27600)
文摘The synthetic routes of porous carbons and the applications of the functional porous carbon-based composite electrode materials for lithium secondary batteries are reviewed. The synthetic methods have made great breakthroughs to control the pore size and volume, wall thickness, surface area, and connectivity of porous carbons, which result in the development of functional porous carbon-based composite electrode materials. The effects of porous carbons on the electrochemical properties are further discussed. The porous carbons as ideal matrixes to incorporate active materials make a great improvement on the electrochemical properties because of high surface area and pore volume, excellent electronic conductivity, and strong adsorption capacity. Large numbers of the composite electrode materials have been used for the devices of electrochemical energy conversion and storage, such as lithium-ion batteries （LIBs）, Li-S batteries, and Li-O2 batteries. It is believed that functional porous carbon-based composite electrode materials will continuously contribute to the field of lithium secondary batteries.
基金Project(2005CB623703) supported by the National Basic Research Program of China project(5JJ30103) supported bythe Natural Science Foundation of Hunan Province
文摘Taking the nano-sized carbon black and aniline monomer as precursor and （NH4）2S2O6 as oxidant, the well coated C/polyaniline（C/PANI） composite materials were prepared by in situ polymerization of the aniline on the surface of well-dispersed nano-sized carbon black for supercapacitor. The micro-structure of the C/PANI composite electrode materials were analyzed by SEM. The electrochemical properties of C/ PANI and PANI composite electrode were characterized by means of the galvanostatic charge-discharge experiment, cyclic voltammetric measurement and impedance spectroscopy analysis. The results show that by adding the nano-sized carbon black in the process of chemical polymerization of the aniline, the polyaniline can be in situ polymerized and well-coated onto the carbon black particles, which may effectively improve the aggregation of particles and the electrolyte penetration. What’s more , the maximum of specific capacitance of C/PANI electrode 437.6F·g -1 can be attained. Compared with PANI electrode, C/PANI electrode shows more desired capacitance characteristics, smaller internal resistance and better cycle performance.
基金supported by the National Natural Science Foundation of China (51203071, 51363014 and 51362018)China Postdoctoral Science Foundation (2014M552509)+1 种基金the Key Project of Chinese Ministry of Education (212183)the Natural Science Funds for Distinguished Young Scholars of Gansu Province (1111RJDA012)
文摘This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy reveal that MnO2 nanosheets homogeneously grow onto the surface of micro-HC to form a loose-packed microstructure. The quantity of MnO2 required in the electrode layer has thereby been reduced significantly, and higher specific capacitances have been achieved. The micro-HC/nano-MnO2 electrode presents a high capacitance of 239.0 F g-1 at a current density of 5 m A cm-2, which is a strong promise for high-rate electrochemical capacitive energy storage applications.
基金supported by the National Natural Science Foundation of China(No.51363014,51362018,51203071 and 21163010)the Key Project of Chinese Ministry of Education(No.212183)the Natural Science Funds for Distinguished Young Scholars of Gansu Province(No1111RJDA012)
文摘This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy(SEM) and transmission electron microscopy(TEM) revealed that MnO2nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO2active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO2composite presented high capacitance of 181 F g-1and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na2SO4solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.
文摘The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transportation, and the microstructure characteristics of the electrode. The efficient thickness, which is defined as the electrode thickness corresponding to the minimum electrode polarization resistance, is formulated as a function of charge transfer resistivity, effective resistivity to ion and electron transport, and three-phase boundary length per unit volume. The model prediction is compared with the experimental reports to check the validity. Simulation is performed to show the effect of microstructure, intrinsic material properties, and electrode reaction mechanism on the efficient thickness. The results suggest that when an electrode is fabricated, its thickness should be controlled regarding its composition, particle size of its components, the intrinsic ionic and electronic conductivities,and its reaction mechanisms as well as the expected operation temperatures. The sensitivity of electrode polarization resistance to its thickness is also discussed.
基金supported by the High-Tech Research and Development Program of China (No. 2007AA03Z219)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality, and the Beijing Natural Science Foundation (No. 207001)
文摘Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy （SEM） images revealed that dense and uniform Au-Pt particles with 25-nm diameter were dispersed on SnO2 film. X-ray photoelectron spectroscopy （XPS） results proved that there was an interaction between Au-Pt nanoparticles and SnO2 support. Electrochemical experiments showed that Au-Pt/SnOz/GC composite electrode had a good electrocatalytic activity to the oxidation of methanol
文摘Ordered films were made by casting a mixture of aqueous dispersions of didodecyldimethylammonium bromide (DDAB)-clay composite and myoglobin (Mb) solution on pyrolytic graphite (PG) electrodes. The Mb-DDAB-clay film electrodes showed stable and reversible cyclic voltammetric responses in buffers and can catalyze the reduction of id (TCA).
文摘A novel amperometric biosensor for the detection of hydrogen peroxide is described. The biosensor was constructed by electrodepositing HRP/PPy membrane on the surface of ferrocenecarboxylic acid mediated sol-gel derived composite carbon electrode. The biosensor gives response to hydrogen peroxide in a few seconds with detection limit of 5×10-7 mol·L-1 （based on signal : noise=3）. Linear range is up to 0.2 mmol·L-1.
