The organizations used quality tools to develop their processes and gain satisfaction from the customers. The main objective of this study is to develop levels of quality in the construction industry through the use o...The organizations used quality tools to develop their processes and gain satisfaction from the customers. The main objective of this study is to develop levels of quality in the construction industry through the use of the seven basic quality control tools. Such tools are extremely crucial tools which are used worldwide in the industries for continual improvement. The seven basic quality tools are Check Sheet, Histogram, Pareto Chart, Fishbone Diagram, Control Chart, Flowchart and Scatter Diagram. They were implemented in various steps of the process in order to define the problems, measure its impacts, find out its root causes and solve these problems to ensure the production of non-defective items. The study shows how the seven basic tools of quality are very useful and effective in identifying and removal of defects from the manufacturing process. These tools are helpful in every stage of the defect removal process. This study was conducted on Cleopatra Group Company. This company succeeded to serve the public and private projects in the Egyptian construction sectors.展开更多
Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of...Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.展开更多
A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control （NC） machine tool and controlling the limited cutting width. A model of the cutting system of the NC mac...A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control （NC） machine tool and controlling the limited cutting width. A model of the cutting system of the NC machine tool is established. It includes the mechanical system, the servo system and the cutting chatter system. Interactions between every two systems are shown in the model. The cutting system stability is simulated and relation curves between the limited cutting width and servo system parameters are described in the experiment. Simulation and experimental results show that there is a mapping relation between the limited cutting width and servo parameters of the NC machine tool, and the method is applicable and credible to suppress chatter.展开更多
The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also...The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also makes thermal error prediction difficult. To address this issue, a novel prediction method for machine tool thermal error based on Bayesian networks (BNs) was presented. The method described causal relationships of factors inducing thermal deformation by graph theory and estimated the thermal error by Bayesian statistical techniques. Due to the effective combination of domain knowledge and sampled data, the BN method could adapt to the change of running state of machine, and obtain satisfactory prediction accuracy. Ex- periments on spindle thermal deformation were conducted to evaluate the modeling performance. Experimental results indicate that the BN method performs far better than the least squares (LS) analysis in terms of modeling estimation accuracy.展开更多
A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus...A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus, the zero-failure data form and corresponding Bayesian model are developed to solve the zero-failure problem of NCMTs, for which no previous suitable statistical model has been developed. An expert-judgment process that incorporates prior information is presented to solve the difficulty in obtaining reliable prior distributions of Weibull parameters. The equations for the posterior distribution of the parameter vector and the Markov chain Monte Carlo(MCMC) algorithm are derived to solve the difficulty of calculating high-dimensional integration and to obtain parameter estimators. The proposed method is applied to a real case; a corresponding programming code and trick are developed to implement an MCMC simulation in Win BUGS, and a mean time between failures(MTBF) of 1057.9 h is obtained. Given its ability to combine expert judgment, prior information, and data, the proposed reliability modeling and assessment method under the zero failure of NCMTs is validated.展开更多
The impact of environmental regulation on technology innovation is a hot spot in current research where a large number of empirical studies are based on Porter Hypothesis(PH). However, there are still controversies in...The impact of environmental regulation on technology innovation is a hot spot in current research where a large number of empirical studies are based on Porter Hypothesis(PH). However, there are still controversies in academia about the establishment of "weak" and "narrow" versions of PH. Based on the panel data of application for patent of energy conservation and emission reduction(ECER) technology of Chinese city scale during 2008-2014, comprehensive energy price, pollutant emission, etc., mixed regression model and systematic generalized method of moments method were adopted, respectively,to study the impact of market-oriented and command-and-control policy tool on China's ECER technology innovation. The results show that the environmental regulation hindered the technological innovation in the immediate phase; however, it turned out to be positive in the first-lag phase. Hence, the establishment of "weak" PH is time-bounded. The command-and-control policy tool played a more positive role in promoting technological innovation in the first-lag phase than market-oriented policy tool. Therefore, "narrow" PH is not tenable. The reason is that the main participants of China's ECER technology innovation are state-owned companies and public institutions. Regionally speaking, the impact which command-and-control policy tool has on technological innovation at sight was nonsignificant in the eastern, the central, and the western regions of China whilst market-oriented policy tool had a negative effect. And market-oriented policy tool in the central region had strongest negative effect, which would diminish in the eastern region and become weakest in the western region. This was related to regional energy consumption level and the market economic vitality.展开更多
Infection Prevention and Control is a Quality Standard and is crucial in all health care facilities. Many hospitals remain deficient in trained infection control professionals (ICPs), and now there is an acute awarene...Infection Prevention and Control is a Quality Standard and is crucial in all health care facilities. Many hospitals remain deficient in trained infection control professionals (ICPs), and now there is an acute awareness of the need to correct this shortfall. The objectives of the study were to describe the current status of ICP programs at ministry of health (MOH) and to evaluate the current status of infection prevention and control programs at health care facilities in kingdom of Saudi Arabia. A cross sectional interview and a self assessment study were conducted on infection prevention and control (IPC) program in Saudi Arabia. All the MOH hospital in all regions was randomly chosen to the study setting. The selection of facilities was done at random with a clear intention to include twenty regions. A random sample was taken from these hospitals with sample size 56 (55.4%), by Multi stage random sampling technique. Results showed that the total facility in all over the kingdom was 51.4% where central area covered the facility score 58.2%, followed by western area (54.8%), south (53.7%), east (46.3%), and lastly with (45.8%) north area. Survey revealed that the infrastructure for infection control program in Saudi Arabian hospitals remained underdeveloped. There were defects in the identified components of effective infection control programs.展开更多
In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML...In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.展开更多
A structure scheme for a novel hybrid machine tool (HMT) is proposed in this paper. In the scheme,a 4-DOFs 1PS+3TPS type spatial hybrid mechanism is utilized as main feed mechanism,with assistance of a two direction m...A structure scheme for a novel hybrid machine tool (HMT) is proposed in this paper. In the scheme,a 4-DOFs 1PS+3TPS type spatial hybrid mechanism is utilized as main feed mechanism,with assistance of a two direction movable worktable,multi-coordinates NC machining can be realized. In the main feed mechanism,fixed platform is connected with moving platform by three TPS driving links and one PS driving link,one translation DOF and three rotation DOFs can be achieved by it. This type HMT enjoys some advantages over its conventional counterparts:large workspace,good dexterity,etc. Closed form inverse displacement analysis model and inverse kinematic model for main feed mechanism are established. A fuzzy PID control scheme for machining control of HMTs with high tracking precision is proposed aiming at highly nonlinear,tightly coupled and uncertain characteristic of HMTs. Simulation researches for fuzzy PID control of HMTs are carried out. Simulation Results demonstrate the effectiveness and the Robostness of the fuzzy PID controller.展开更多
Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC ...Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC machine tools was built by considering the influences of the cutting tool geometrical parameters.The manufacturing CEs were produced by electric power,cutting tools,and cutting fluid consumed in manufacturing process. The parameters of cutting tools affected not only the CEs,but also the machining quality. Then the actual constraint models of the machine performance,machining quality were given in order to optimize the cutting parameters and achieve the low-CEs. Finally,a case was given to analyze the influences of the cutting tool angles on the manufacturing CEs. The results show that the CEs decrease as the rake angle and edge angle increase under the constraints of the machine specifications and machining quality.展开更多
In this paper, a Supervised Linear Feature Mapping(SLFM) algorithm, as a modification of the Kohonen Self Organizing Mapping (SOM),is proposed. The applications in cutting tool wear estimation and quality control and...In this paper, a Supervised Linear Feature Mapping(SLFM) algorithm, as a modification of the Kohonen Self Organizing Mapping (SOM),is proposed. The applications in cutting tool wear estimation and quality control and the comparison with a back propagation (BP) algorithm are discussed. The results show that the SLFM algorithm requires less training time and has higher accuracy compared with the BP algorithm. It might be a great potential approach to integrate multi sensor information in process control.展开更多
The structure features and driving modes of virtual axis NC machine tools are studied. Accor ding to different application requirements,the three axis control method,the five axis control method and the sixfre...The structure features and driving modes of virtual axis NC machine tools are studied. Accor ding to different application requirements,the three axis control method,the five axis control method and the sixfreedom control method are put forward.These results lay a foundation for the product development of the virtual axis NC machine tools展开更多
Highly accurate manufacture in machining industry can only be obtained with precise temperature control of the coolant （oil or water）.Machine tool with more accurate,stable and advanced the precision of the working ...Highly accurate manufacture in machining industry can only be obtained with precise temperature control of the coolant （oil or water）.Machine tool with more accurate,stable and advanced the precision of the working component cannot be developed without appropriate cooling.However,the machine tool coolers are facing the control hunting of cooling temperature and the dramatic variation of heat load in high-accuracy machining.The main objective of this study is to evaluate the influence of the hot-gas by-pass scheme and suction regulation for capacity control of a machine tool cooler system.In this study,experimental investigation on both hot-gas by-pass scheme and suction valve regulation for capacity control has been proposed.Effects of using capillary tube and thermostatic expansion valve along with different capacity control scheme have been investigated extensively in an environmental testing room.Cooling performance and power consumption of the cooler system have been measured and analyzed as well by comparing with different opening percentage of throttling valve under specific coolant temperature.The experimental results reveal that the power consumption will reduce slightly by capacity control using the hot-gas by-pass scheme but the coefficient of performance （COP） of the overall system will decrease.Lower coolant temperature will result in higher compressor power consumption as well.While conducting suction valve regulating for capacity control,energy-saving at 10%-12% can be obtained by using thermostatic expansion valve under different evaporator load.It also reveals that suction valve regulation along with adequate choice of thermostatic expansion valve can provide alternative choice for steady capacity control and substantial energy-saving.The proposed cooler systems with different capacity control schemes are not only more cost-effective than inverter driven system,but also can perform energy-saving and precise temperature control specific for high-accuracy machine tool cooling.展开更多
文摘The organizations used quality tools to develop their processes and gain satisfaction from the customers. The main objective of this study is to develop levels of quality in the construction industry through the use of the seven basic quality control tools. Such tools are extremely crucial tools which are used worldwide in the industries for continual improvement. The seven basic quality tools are Check Sheet, Histogram, Pareto Chart, Fishbone Diagram, Control Chart, Flowchart and Scatter Diagram. They were implemented in various steps of the process in order to define the problems, measure its impacts, find out its root causes and solve these problems to ensure the production of non-defective items. The study shows how the seven basic tools of quality are very useful and effective in identifying and removal of defects from the manufacturing process. These tools are helpful in every stage of the defect removal process. This study was conducted on Cleopatra Group Company. This company succeeded to serve the public and private projects in the Egyptian construction sectors.
基金Supported by the Project of National Natural Science Foundation of China(52234002,42230814)。
文摘Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.
文摘A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control （NC） machine tool and controlling the limited cutting width. A model of the cutting system of the NC machine tool is established. It includes the mechanical system, the servo system and the cutting chatter system. Interactions between every two systems are shown in the model. The cutting system stability is simulated and relation curves between the limited cutting width and servo system parameters are described in the experiment. Simulation and experimental results show that there is a mapping relation between the limited cutting width and servo parameters of the NC machine tool, and the method is applicable and credible to suppress chatter.
基金Project supported by National Natural Science Foundation of China(No. 50675199)the Science and Technology Project of Zhejiang Province (No. 2006C11067), China
文摘The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also makes thermal error prediction difficult. To address this issue, a novel prediction method for machine tool thermal error based on Bayesian networks (BNs) was presented. The method described causal relationships of factors inducing thermal deformation by graph theory and estimated the thermal error by Bayesian statistical techniques. Due to the effective combination of domain knowledge and sampled data, the BN method could adapt to the change of running state of machine, and obtain satisfactory prediction accuracy. Ex- periments on spindle thermal deformation were conducted to evaluate the modeling performance. Experimental results indicate that the BN method performs far better than the least squares (LS) analysis in terms of modeling estimation accuracy.
基金Project(2014ZX04014-011)supported by State Key Science&Technology Program of ChinaProject([2016]414)supported by the 13th Five-year Program of Education Department of Jilin Province,China
文摘A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus, the zero-failure data form and corresponding Bayesian model are developed to solve the zero-failure problem of NCMTs, for which no previous suitable statistical model has been developed. An expert-judgment process that incorporates prior information is presented to solve the difficulty in obtaining reliable prior distributions of Weibull parameters. The equations for the posterior distribution of the parameter vector and the Markov chain Monte Carlo(MCMC) algorithm are derived to solve the difficulty of calculating high-dimensional integration and to obtain parameter estimators. The proposed method is applied to a real case; a corresponding programming code and trick are developed to implement an MCMC simulation in Win BUGS, and a mean time between failures(MTBF) of 1057.9 h is obtained. Given its ability to combine expert judgment, prior information, and data, the proposed reliability modeling and assessment method under the zero failure of NCMTs is validated.
文摘The impact of environmental regulation on technology innovation is a hot spot in current research where a large number of empirical studies are based on Porter Hypothesis(PH). However, there are still controversies in academia about the establishment of "weak" and "narrow" versions of PH. Based on the panel data of application for patent of energy conservation and emission reduction(ECER) technology of Chinese city scale during 2008-2014, comprehensive energy price, pollutant emission, etc., mixed regression model and systematic generalized method of moments method were adopted, respectively,to study the impact of market-oriented and command-and-control policy tool on China's ECER technology innovation. The results show that the environmental regulation hindered the technological innovation in the immediate phase; however, it turned out to be positive in the first-lag phase. Hence, the establishment of "weak" PH is time-bounded. The command-and-control policy tool played a more positive role in promoting technological innovation in the first-lag phase than market-oriented policy tool. Therefore, "narrow" PH is not tenable. The reason is that the main participants of China's ECER technology innovation are state-owned companies and public institutions. Regionally speaking, the impact which command-and-control policy tool has on technological innovation at sight was nonsignificant in the eastern, the central, and the western regions of China whilst market-oriented policy tool had a negative effect. And market-oriented policy tool in the central region had strongest negative effect, which would diminish in the eastern region and become weakest in the western region. This was related to regional energy consumption level and the market economic vitality.
文摘Infection Prevention and Control is a Quality Standard and is crucial in all health care facilities. Many hospitals remain deficient in trained infection control professionals (ICPs), and now there is an acute awareness of the need to correct this shortfall. The objectives of the study were to describe the current status of ICP programs at ministry of health (MOH) and to evaluate the current status of infection prevention and control programs at health care facilities in kingdom of Saudi Arabia. A cross sectional interview and a self assessment study were conducted on infection prevention and control (IPC) program in Saudi Arabia. All the MOH hospital in all regions was randomly chosen to the study setting. The selection of facilities was done at random with a clear intention to include twenty regions. A random sample was taken from these hospitals with sample size 56 (55.4%), by Multi stage random sampling technique. Results showed that the total facility in all over the kingdom was 51.4% where central area covered the facility score 58.2%, followed by western area (54.8%), south (53.7%), east (46.3%), and lastly with (45.8%) north area. Survey revealed that the infrastructure for infection control program in Saudi Arabian hospitals remained underdeveloped. There were defects in the identified components of effective infection control programs.
文摘In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.
文摘A structure scheme for a novel hybrid machine tool (HMT) is proposed in this paper. In the scheme,a 4-DOFs 1PS+3TPS type spatial hybrid mechanism is utilized as main feed mechanism,with assistance of a two direction movable worktable,multi-coordinates NC machining can be realized. In the main feed mechanism,fixed platform is connected with moving platform by three TPS driving links and one PS driving link,one translation DOF and three rotation DOFs can be achieved by it. This type HMT enjoys some advantages over its conventional counterparts:large workspace,good dexterity,etc. Closed form inverse displacement analysis model and inverse kinematic model for main feed mechanism are established. A fuzzy PID control scheme for machining control of HMTs with high tracking precision is proposed aiming at highly nonlinear,tightly coupled and uncertain characteristic of HMTs. Simulation researches for fuzzy PID control of HMTs are carried out. Simulation Results demonstrate the effectiveness and the Robostness of the fuzzy PID controller.
基金Research Fund for the Doctoral Program of Higher Education of China(No.20122125120013)Scientific Research Fund of Liaoning Provincial Education Department,China(No.L2013206)the Fundamental Research Funds for the Central Universities,China(Nos.3132014303,3132015087)
文摘Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC machine tools was built by considering the influences of the cutting tool geometrical parameters.The manufacturing CEs were produced by electric power,cutting tools,and cutting fluid consumed in manufacturing process. The parameters of cutting tools affected not only the CEs,but also the machining quality. Then the actual constraint models of the machine performance,machining quality were given in order to optimize the cutting parameters and achieve the low-CEs. Finally,a case was given to analyze the influences of the cutting tool angles on the manufacturing CEs. The results show that the CEs decrease as the rake angle and edge angle increase under the constraints of the machine specifications and machining quality.
文摘In this paper, a Supervised Linear Feature Mapping(SLFM) algorithm, as a modification of the Kohonen Self Organizing Mapping (SOM),is proposed. The applications in cutting tool wear estimation and quality control and the comparison with a back propagation (BP) algorithm are discussed. The results show that the SLFM algorithm requires less training time and has higher accuracy compared with the BP algorithm. It might be a great potential approach to integrate multi sensor information in process control.
文摘The structure features and driving modes of virtual axis NC machine tools are studied. Accor ding to different application requirements,the three axis control method,the five axis control method and the sixfreedom control method are put forward.These results lay a foundation for the product development of the virtual axis NC machine tools
基金supported by Science Committee of Taiwan,China(Grant No. NSC 98-2622-E-167-029-CC3),and Industrial Technology Research Institute,Taiwan,China
文摘Highly accurate manufacture in machining industry can only be obtained with precise temperature control of the coolant （oil or water）.Machine tool with more accurate,stable and advanced the precision of the working component cannot be developed without appropriate cooling.However,the machine tool coolers are facing the control hunting of cooling temperature and the dramatic variation of heat load in high-accuracy machining.The main objective of this study is to evaluate the influence of the hot-gas by-pass scheme and suction regulation for capacity control of a machine tool cooler system.In this study,experimental investigation on both hot-gas by-pass scheme and suction valve regulation for capacity control has been proposed.Effects of using capillary tube and thermostatic expansion valve along with different capacity control scheme have been investigated extensively in an environmental testing room.Cooling performance and power consumption of the cooler system have been measured and analyzed as well by comparing with different opening percentage of throttling valve under specific coolant temperature.The experimental results reveal that the power consumption will reduce slightly by capacity control using the hot-gas by-pass scheme but the coefficient of performance （COP） of the overall system will decrease.Lower coolant temperature will result in higher compressor power consumption as well.While conducting suction valve regulating for capacity control,energy-saving at 10%-12% can be obtained by using thermostatic expansion valve under different evaporator load.It also reveals that suction valve regulation along with adequate choice of thermostatic expansion valve can provide alternative choice for steady capacity control and substantial energy-saving.The proposed cooler systems with different capacity control schemes are not only more cost-effective than inverter driven system,but also can perform energy-saving and precise temperature control specific for high-accuracy machine tool cooling.
