A semisynthetic polymer of carboxymethyl sago cellulose (CMSC) was synthesized from Malaysian sago biomass and further used in the development of drug delivery system. Recently, we have reported spray-dried carboxymet...A semisynthetic polymer of carboxymethyl sago cellulose (CMSC) was synthesized from Malaysian sago biomass and further used in the development of drug delivery system. Recently, we have reported spray-dried carboxymethyl sago cellulose (CMSC) microspheres for enteric release and dissolution enhancement of piroxicam. In the present investigation, an attempt has been made to improve the enteric release property of CMSC microspheres using aluminium chloride as a cross-linker in the spray drying process and prednisolone as a model drug. CMSC microspheres loaded with prednisolone were prepared using a cross-linker concentration of 0%, 0.01%, 0.025% and 0.05%. All the drug-loaded microspheres were found to have high drug entrapment efficiencies (DEE) ranging from 99% to 106.1%. FT-IR spectroscopy has confirmed the cross-linking in CMSC microspheres as well as intact and amorphous nature of the entrapped drug. Field Emission Scanning Electron Microscope (FESEM) results have shown agglomeration of microspheres and the presence of drugs on the surface. Cross-linked microspheres have shown better efficiency than the uncross-linked microspheres in restricting drug release in stomach pH. Only about 5% of the loaded drug was released from cross-linked microspheres at pH 1.2 while 10% of the drug was released from uncross-linked microspheres. Also, cross-linked microspheres have exhibited faster drug release in pH 6.8 than the uncross-linked microspheres. Spray-dried and AlCl<sub>3</sub> cross-linked CMSC microspheres have shown promising results in enteric drug delivery as well as dissolution enhancement.展开更多
Aqueous rechargeable Zn-metal batteries(ARZBs)are considered one of the most promising candidates for grid-scale energy storage.However,their widespread commercial application is largely plagued by three major challen...Aqueous rechargeable Zn-metal batteries(ARZBs)are considered one of the most promising candidates for grid-scale energy storage.However,their widespread commercial application is largely plagued by three major challenges:The uncontrollable Zn dendrites,notorious parasitic side reactions,and sluggish Zn^(2+) ion transfer.To address these issues,we design a sustainable dual crosslinked cellulose hydrogel electrolyte,which has excellent mechanical strength to inhibit dendrite formation,high Zn^(2+) ions binding capacity to suppress side reaction,and abundant porous structure to facilitate Zn^(2+) ions migration.Consequently,the Zn||Zn cell with the hydrogel electrolyte can cycle stably for more than 400 h under a high current density of 10 mA cm^(−2).Moreover,the hydrogel electrolyte also enables the Zn||polyaniline cell to achieve high-rate and long-term cycling performance(>2000 cycles at 2000 mA g^(−1)).Remarkably,the hydrogel electrolyte is easily accessible and biodegradable,making the ARZBs attractive in terms of scalability and sustainability.展开更多
In this study, we modified microcrystalline cellulose by cross-linking it with epichlorohydrin to obtain a rapid and efficient adsorbent for the removal of Reactive Blue 4 dye from aqueous solution. Evidences of the c...In this study, we modified microcrystalline cellulose by cross-linking it with epichlorohydrin to obtain a rapid and efficient adsorbent for the removal of Reactive Blue 4 dye from aqueous solution. Evidences of the cross-linking of the microcrystalline cellulose were obtained by Fourier transform infrared spectroscopy, X-ray diff raction, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, and scanning electron microscopy. We investigated the eff ects of adsorbent dosage, p H, initial dye concentration, temperature, and contact time on the dye adsorption capacity. The results showed that the adsorption equilibrium time was just 20 min and the maximum adsorption capacity was 69.79 mg/g. The adsorption isotherm data fitted the Langmuir isotherm model well, and the adsorption kinetics data followed the pseudo-second-order kinetic model. The results of the thermodynamic analysis suggest that the adsorption process was spontaneous and exothermic. Recyclability experiments demonstrated the good reusability of this adsorbent. Electrostatic interaction was found to dominate the adsorption process.展开更多
The present study aimed to compare the clinical efficacy of a 0.4% carbomer gel and 1% carboxymethyl cellulose （CMC） containing artificial tears in treatment of dry eye patients. Sixty subjects with mean age of 45.8...The present study aimed to compare the clinical efficacy of a 0.4% carbomer gel and 1% carboxymethyl cellulose （CMC） containing artificial tears in treatment of dry eye patients. Sixty subjects with mean age of 45.89 years who had symptoms and signs of dry eye were enrolled in this prospective, investigator-masked and stratified random sampling study. The subjects were divided into two parallel groups with 30 subjects （60 eyes） in each group. One group received carbomer gel, and the other group received 1% CMC containing artificial tears. Subjects received the drops 3 to 4 times or more per day for 3 months. At the first visit time, the precorneal residence time of these two drops was measured. The efficacy was assessed by comparing the subjective symptoms （ocular dry- ness, foreign body sensation, burning sensation and pain）, and the objective test results of tears breakup time, Schirmer＇s test and corneal fluorescein staining prior to the study and after the treat- ment. As a result, the ocular residence time of carbomer gel was significantly longer than that of 1% CMC （P〈0.001）. Most of the primary subjective symptoms and objective test results were improved after treatment in both carbomer gel group and 1% CMC group. As to the improvement of each symptom and objective test result, carbomer gel was more effective than 1% CMC group （P〈0.01）. In conclusion, carbomer gel had longer precorneal residence time and was more effective than 1% CMC in the treatment of patients with dry eyes.展开更多
Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by ...Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.展开更多
We prepared spherical microcapsules modified by carboxymethyl cellulose（CMC） with urea-formaldehyde（UF） resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmi...We prepared spherical microcapsules modified by carboxymethyl cellulose（CMC） with urea-formaldehyde（UF） resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmic features, chemical structure, and thermal performance of the microcapsules by SEM, FTIR, DSC, and TGA. We studied the effects of different experimental parameters of curing p H, the amounts of the emulsifier and emulsion speed. The CMC-UF microcapsules had good heat resistance and stability. The enthalpy of CMC-UF microcapsules reached 50.33 J g-1. Therefore, CMC-UF resin can be used as a potential wall material of phase change materials.展开更多
To achieve optimal recovery and value-added utilisation of cellulose in peanut shells,the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method.Then,cellulose hydrogel was pr...To achieve optimal recovery and value-added utilisation of cellulose in peanut shells,the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method.Then,cellulose hydrogel was prepared by graft copolymerisation using N,N’-methylenebisacrylamide as the cross-linking agent,sodium persulfate as the initiator,and acrylic acid as the monomer.Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g,initiator dosage of 0.20 g,polymerisation temperature of 70°C,cross-linking agent of 0.25 g,and monomer dosage of 3.0 mL.The effect of initiator dosage on hydrogel synthesis was the most significant,followed by monomer dosage and reaction temperature.Characterisation using X-ray diffraction analysis and scanning electron microscopy revealed that the hydrogel was amorphous and exhibited a distinct three-dimensional double network structure.Hydrogel swelling kinetic analysis showed that the hydrogel swelling process was divided into three stages,and fitted the Schott secondary swelling kinetic model.The prepared hydrogel had a good adsorption effect on methylene blue;the adsorption of methylene blue by the hydrogel was 1.259 mg/g at 25°C when the initial concentration of methylene blue was 5 mg/L.The adsorption kinetics of the hydrogel fit the pseudo-first-order kinetic model,pseudo-secondorder kinetic model,Eovich model and particle diffusion model.The best fitting effect was obtained with the pseudo-second-order kinetic model.The adsorption isotherm analysis of methylene blue on hydrogel showed that the adsorption process was consistent with Langmuir and Freundlich models.The correlation coefficient of the Freundlich isotherm model was higher,indicating that the adsorption of methylene blue on hydrogel was mainly chemisorption.展开更多
Conductive ionic hydrogels(CIH)have been widely studied for the development of stretchable electronic devices,such as sensors,electrodes,and actuators.Most of these CIH are made into 3D or 2D shape,while 1D CIH(hydrog...Conductive ionic hydrogels(CIH)have been widely studied for the development of stretchable electronic devices,such as sensors,electrodes,and actuators.Most of these CIH are made into 3D or 2D shape,while 1D CIH(hydrogel fibers)is often difficult to make because of the low mechanical robustness of common CIH.Herein,we use gel spinning method to prepare a robust CIH fiber with high strength,large stretchability,and good conductivity.The robust CIH fiber is drawn from the composite gel of sodium polyacrylate(PAAS)and sodium carboxymethyl cellulose(CMC).In the composite CIH fiber,the soft PAAS presents good conductivity and stretchability,while the rigid CMC significantly enhances the strength and toughness of the PAAS/CMC fiber.To protect the conductive PAAS/CMC fiber from damage by water,a thin layer of hydrophobic polymethyl acrylate(PMA)or polybutyl acrylate(PBA)is coated on the PAAS/CMC fiber as a water-resistant and insulating cover.The obtained PAAS/CMC-PMA and PAAS/CMC-PBA CIH fibers present high tensile strength(up to 28 MPa),high tensile toughness(up to 43 MJ/m~3),and good electrical conductivity(up to 0.35 S/m),which are useful for textile-based stretchable electronic devices.展开更多
A series of carboxymethyl cellulose/organic montmorillonite （CMC/OMMT） nanocomposites with different weight ratios of carboxymethyl cellulose （CMC） to organic montmorillonite （OMMT） were synthesized under differ...A series of carboxymethyl cellulose/organic montmorillonite （CMC/OMMT） nanocomposites with different weight ratios of carboxymethyl cellulose （CMC） to organic montmorillonite （OMMT） were synthesized under different conditions. The nanocomposites were characterized by the Fourier transform infrared （FT-IR） spectrophotometer, X-ray diffraction （XRD） method, transmission electron microscope （TEM）, scanning electron microscope （SEM）, and thermal gravimetric （TG） analysis. The results showed that the introduction of CMC may have different influences on the physico-chemical properties of OMMT and intercalated-exfoliated nanostructures were formed in the nanocomposites. The effects of different reaction conditions on the adsorption capacity of samples for Congo Red （CR） dye were investigated by controlling the amount ofhexadecyl trimethyl ammonium bromide （CTAB）, the weight ratio of CMC to OMMT, the reaction time, and the reaction temperature. Results from the adsorption experiment showed that the adsorption capacity of the nanocomposites can reach 171.37 rag/g, with the amount of CTAB being 1.0 cation exchange capacity （CEC） of MMT, the weight ratio of CMC to OMMT being l：l, the reaction time being 6 h, and the reaction temperature being 60~C. The CMC/OMMT nanocomposite can be used as a potential adsorbent to remove CR dye from an aqueous solution.展开更多
The two kinds of super absorbent resins from carboxymethyl cellulose were synthesized with the potassium persulphate and methylenebisacrylamide as initiator and cross linker respectively by radical polymerization in a...The two kinds of super absorbent resins from carboxymethyl cellulose were synthesized with the potassium persulphate and methylenebisacrylamide as initiator and cross linker respectively by radical polymerization in aqueous solution. Thestructures of the two resins were characterized with Fourier transform infrared spectroscopy FTIR, scanning electron miscroscopy （SEM）, and environment scanning electron miscroscopy （ESEM）, the results indicate that the fibriform of the carboxymethyl cellulose （CMC） is disappeared and the crusslink networks in eopolymer of carboxymethyl cellulose-graft-polyacrylic acid（CMC-g-PAA） are denser than that of eopolymer of carboxymethyl cellulose-graft-poly （acrylic acid-co-N-vinyl Pyrrolidone） （CMC-g- PAA-co-PVP）. The comparison between the two resins in absorption capacities is that CMC-g-PAA is better in the water-keep capability being heated, while CMC-g-PAA-co-PVP is better in the water absorbency and salt resistance.展开更多
The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization,...The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L-1 HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298-328 K. The associated apparent activation energy (E*a ) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.展开更多
Oral iron supplements such as ferrous iron salts are major treatment agents for iron deficiency anemia(IDA)due to the convenience of large dose administration and good patient compliance.However,the gastrointestinal a...Oral iron supplements such as ferrous iron salts are major treatment agents for iron deficiency anemia(IDA)due to the convenience of large dose administration and good patient compliance.However,the gastrointestinal adverse impact caused by Fe2+stimulus and low bioavailability severely impedes its therapeutic effects.In recent years,it has been found that nano iron⁃based nanoparticles with high surface⁃to⁃volume ratio and low iron ion leakage can alleviate the toxic effect and improve the gastrointestinal absorbance.For further clinical development,nano materials need to meet the pharmaceutical quality demand.Carboxymethyl cellulose(CMC)is a significant pharmaceutical ingredient applied in approved drug formulations,and polyglucosorbitol carboxymethylether(PSC)has been utilized in iron⁃based nanomedicine ferumoxytol synthesis,both of which can be firmly anchored on iron oxide by carboxyl chelation.In this work,iron oxide nanoparticles(NPs)modified with CMC were designed and synthesized,and the structure composition and physicochemical properties were distinctly characterized.Oral supplement effects on rat IDA were investigated and compared with other recently reported iron supplements including NPs modified with PSC.Results show that the oral nano iron supplement achieved the recovery of hemoglobin and serum iron level in only two weeks with high safety.The nano iron oxide modified with pharmaceutical excipients provides new potential approach for oral iron supplement available in clinics.展开更多
Biopolymer electrolyte based on carboxymethyl cellulose has been prepared by doping with different concentration of oleic acid via solution casting technique. Fourier Transform Infrared spectroscopy was used to study ...Biopolymer electrolyte based on carboxymethyl cellulose has been prepared by doping with different concentration of oleic acid via solution casting technique. Fourier Transform Infrared spectroscopy was used to study the complexation between the salt and polymer. New peak was observed at 1710, 2850, 2920 cm-1. X-ray diffraction study reveals the amorphous nature of the biopolymer electrolyte. Impedance study shows the highest ionic conductivity, σ, was found to be 2.11 × 10-5 S·cm-1 at room temperature (303 K) for sample containing 20 wt.% of oleic acid and the biopolymer electrolyte obeys Arrhenius behaviour.展开更多
Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium ...Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium carbonate tablets are carried out at various temperatures.The dissolution process of each tablet is measured by electrical conductivity tracking method and the concentration of dissolved sodium carbonate is quanti fied with calibrated conductivity-concentration converting equation of sodium carbonate.The quanti fied dissolution data is fitted with both surface reaction model and diffusion layer model and the results clearly show that surface reaction model is suggested as the appropriate dissolution model for all measured tablets.Therefore,it is determined that carboxymethyl cellulose is a stable element to remain the dissolution mechanism of tablet unchanged.The dissolution rate constant quanti fied with surface reaction model presents that carboxymethyl cellulose-sodium carbonate two-component tablets obtain signi ficant higher dissolution rate constant than pure sodium carbonate tablet and higher proportion of carboxymethyl cellulose leads to apparent higher dissolution rate constant.The results prove for the usage of carboxymethyl cellulose in most practical applications at a relative low-level,the effect of carboxymethyl cellulose is effective and positive for two-component tablet to enhance the dissolution process and improve dissolution rate constant and this effect is speculated coming from its dynamic physical transforming process in water including dilation and conglutination.展开更多
In this research it was shown that mineral surface metal-lic sites played a decisive role in carboxymethyl cellulose (CMC) adsorp-tion, and surface hydrophobicity alone did not have significant effects. Both the carbo...In this research it was shown that mineral surface metal-lic sites played a decisive role in carboxymethyl cellulose (CMC) adsorp-tion, and surface hydrophobicity alone did not have significant effects. Both the carboxymethyl groups and the hydroxyl groups of the CMC par-ticipated in the interaction with mineral surface, with the carboxymethyl groups interacting with metal and metal hydroxyl species, and hydroxyl groups interacting with metal hydroxide species, respectively.展开更多
A silica-supported carboxymethylcellulose platinum complex (abbreviated as SiO_2-CMC-Pt) has been prepared and characterized by XPS. Its catalytic properties for hydro-genation of aromatic compounds were studied. The ...A silica-supported carboxymethylcellulose platinum complex (abbreviated as SiO_2-CMC-Pt) has been prepared and characterized by XPS. Its catalytic properties for hydro-genation of aromatic compounds were studied. The results showed that this catalystcould catalyze the hydrogenation of phenol, anisol, p-cresol, benzene and toluene to cyclo-hexanol, cyclohexyl methyl ether, p-methyl cyclohexanol, cyclohexane and methylcyclo-hexane, respectively in 100% yield at 30℃ and 1 atm. In the hydrogenation of phenol,COO/Pt ratio in SiO_2-CMC-Pt has much influence on the initial hydrogenation rate andthe selectivity for the intermediate product, cyclohexanone. The highest initial rate andthe highest yield of cyclohexanone both occur at COO/Pt ratio of 6. The complex is stableduring the reaction and can be used repeatedly.展开更多
Carboxymethyl cellulose(CMC) fibers were produced by extruding the CMC solution into the metal salt coagulation bath and collected with a winding machine.It was found that copper chloride,ferric chloride,cerium chlori...Carboxymethyl cellulose(CMC) fibers were produced by extruding the CMC solution into the metal salt coagulation bath and collected with a winding machine.It was found that copper chloride,ferric chloride,cerium chloride,lanthanum chloride and aluminum nitrate solution could be used as coagulation bath to prepare CMC fibers,whereas the metal salt solutions,such as nickel chloride,zinc chloride,calcium chloride and magnesium chloride,could not.The fiber formation is due to the coordination between the carboxylates of CMC and metal ion.Fourier transform infrared spectroscopy(FTIR) was applied to studying the coordination mode of CMC and metal ion.The metal salt concentration,pH value and temperature of the coagulation bath affect the tenacity and elongation of the fiber.CMC fibers show good water uptake ability and can adsorb water more than 200% of its own weight.The mechanical behaviors of CMC fiber show dependence on environment humidity.展开更多
Bamboo harvesting residues are wastes by-products of bamboo industries that contain holocellulose for about 63.14%to 70.71%,which often be discarded,incinerated or buried.In this study,carboxymethyl cellulose was prep...Bamboo harvesting residues are wastes by-products of bamboo industries that contain holocellulose for about 63.14%to 70.71%,which often be discarded,incinerated or buried.In this study,carboxymethyl cellulose was prepared from bamboo harvesting residues(bamboo-branch and bamboo-tip)as raw materials.The chemical composition of bamboo harvesting residues,the viscosity and degree of substitution of carboxymethyl cellulose were determined.Carboxymethyl cellulose obtained was further characterized and compared by means of FTIR,SEM,XRD and TG.Results showed that under the optimized identical conditions,the viscosity and degree of substitution of carboxymethyl cellulose from bamboo-branch and bamboo-tip were 6.0 and 78.9 mPa·s,0.75 and 0.89,respectively.Carboxymethyl cellulose obtained from bamboo-tip displayed a lower crystallinity and a better thermal stability as compared to synthetic carboxymethyl cellulose obtained from bamboo-branch and bamboo-culm.展开更多
A multifunctional nanoparticle based on carboxymethyl cellulose was developed. Folate group was attached to nanoparticle for specific recognition of cancerous cells and 5FU was encapsulated for delivering cytotoxicity...A multifunctional nanoparticle based on carboxymethyl cellulose was developed. Folate group was attached to nanoparticle for specific recognition of cancerous cells and 5FU was encapsulated for delivering cytotoxicity. The whole system was able to track by the semiconductor quantum dots that were attached to the nanoparticle. The multifunctional nanoparticle was characterized by UV-VIS spectra, PL spectra, FTIR, TEM, SEM etc and was targeted to human breast cancer cell, MCF7. The biocompatibility of nanoparticle without drug and cytotoxicity rendered by nanoparticle with drug was studied with MCF7 and L929 cell lines. The epifluorescent images suggest that the folate-conjugated nanoparticles were more internalized by folate receptor positive cell line, MCF7 than the noncancerous L929 cells.展开更多
Carboxymethyl cellulose hydrogels were developed through crosslinking process using eco-friendly crosslinkers such as maleic,succinic,and citric acids.Carboxymethyl cellulose was prepared from the cellulosic fraction ...Carboxymethyl cellulose hydrogels were developed through crosslinking process using eco-friendly crosslinkers such as maleic,succinic,and citric acids.Carboxymethyl cellulose was prepared from the cellulosic fraction of olive industry residues.A series of hydrogels with varying crosslinker acid concentrations,reaction times,and reaction temperatures was produced to study the swelling capacities and gel fraction of the obtained hydrogels.Additional study pertains to the preparation of antimicrobial nanocomposite hydrogels through in-situ incorporation of the silver nanoparticles during the crosslinking reaction.Silver nanoparticles were prepared by reduction of AgNO3 with leaves of Ricinus communis.The particle size of prepared silver nanoparticles was detected by transmission electron microscopy(TEM).Chemical structure and morphological characterizations of the prepared hydrogels were performed using Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and energy-dispersive X-ray spectroscopy(EDX).Finally,the antimicrobial activity of the loaded silver hydrogels against Gram negative(G-ve),Gram positive(G+ve),and Candida albicans yeast was demonstrated.展开更多
文摘A semisynthetic polymer of carboxymethyl sago cellulose (CMSC) was synthesized from Malaysian sago biomass and further used in the development of drug delivery system. Recently, we have reported spray-dried carboxymethyl sago cellulose (CMSC) microspheres for enteric release and dissolution enhancement of piroxicam. In the present investigation, an attempt has been made to improve the enteric release property of CMSC microspheres using aluminium chloride as a cross-linker in the spray drying process and prednisolone as a model drug. CMSC microspheres loaded with prednisolone were prepared using a cross-linker concentration of 0%, 0.01%, 0.025% and 0.05%. All the drug-loaded microspheres were found to have high drug entrapment efficiencies (DEE) ranging from 99% to 106.1%. FT-IR spectroscopy has confirmed the cross-linking in CMSC microspheres as well as intact and amorphous nature of the entrapped drug. Field Emission Scanning Electron Microscope (FESEM) results have shown agglomeration of microspheres and the presence of drugs on the surface. Cross-linked microspheres have shown better efficiency than the uncross-linked microspheres in restricting drug release in stomach pH. Only about 5% of the loaded drug was released from cross-linked microspheres at pH 1.2 while 10% of the drug was released from uncross-linked microspheres. Also, cross-linked microspheres have exhibited faster drug release in pH 6.8 than the uncross-linked microspheres. Spray-dried and AlCl<sub>3</sub> cross-linked CMSC microspheres have shown promising results in enteric drug delivery as well as dissolution enhancement.
基金This work was financially supported by the National Natural Science Foundation of China(52173106 and 22375154).
文摘Aqueous rechargeable Zn-metal batteries(ARZBs)are considered one of the most promising candidates for grid-scale energy storage.However,their widespread commercial application is largely plagued by three major challenges:The uncontrollable Zn dendrites,notorious parasitic side reactions,and sluggish Zn^(2+) ion transfer.To address these issues,we design a sustainable dual crosslinked cellulose hydrogel electrolyte,which has excellent mechanical strength to inhibit dendrite formation,high Zn^(2+) ions binding capacity to suppress side reaction,and abundant porous structure to facilitate Zn^(2+) ions migration.Consequently,the Zn||Zn cell with the hydrogel electrolyte can cycle stably for more than 400 h under a high current density of 10 mA cm^(−2).Moreover,the hydrogel electrolyte also enables the Zn||polyaniline cell to achieve high-rate and long-term cycling performance(>2000 cycles at 2000 mA g^(−1)).Remarkably,the hydrogel electrolyte is easily accessible and biodegradable,making the ARZBs attractive in terms of scalability and sustainability.
文摘In this study, we modified microcrystalline cellulose by cross-linking it with epichlorohydrin to obtain a rapid and efficient adsorbent for the removal of Reactive Blue 4 dye from aqueous solution. Evidences of the cross-linking of the microcrystalline cellulose were obtained by Fourier transform infrared spectroscopy, X-ray diff raction, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, and scanning electron microscopy. We investigated the eff ects of adsorbent dosage, p H, initial dye concentration, temperature, and contact time on the dye adsorption capacity. The results showed that the adsorption equilibrium time was just 20 min and the maximum adsorption capacity was 69.79 mg/g. The adsorption isotherm data fitted the Langmuir isotherm model well, and the adsorption kinetics data followed the pseudo-second-order kinetic model. The results of the thermodynamic analysis suggest that the adsorption process was spontaneous and exothermic. Recyclability experiments demonstrated the good reusability of this adsorbent. Electrostatic interaction was found to dominate the adsorption process.
文摘The present study aimed to compare the clinical efficacy of a 0.4% carbomer gel and 1% carboxymethyl cellulose （CMC） containing artificial tears in treatment of dry eye patients. Sixty subjects with mean age of 45.89 years who had symptoms and signs of dry eye were enrolled in this prospective, investigator-masked and stratified random sampling study. The subjects were divided into two parallel groups with 30 subjects （60 eyes） in each group. One group received carbomer gel, and the other group received 1% CMC containing artificial tears. Subjects received the drops 3 to 4 times or more per day for 3 months. At the first visit time, the precorneal residence time of these two drops was measured. The efficacy was assessed by comparing the subjective symptoms （ocular dry- ness, foreign body sensation, burning sensation and pain）, and the objective test results of tears breakup time, Schirmer＇s test and corneal fluorescein staining prior to the study and after the treat- ment. As a result, the ocular residence time of carbomer gel was significantly longer than that of 1% CMC （P〈0.001）. Most of the primary subjective symptoms and objective test results were improved after treatment in both carbomer gel group and 1% CMC group. As to the improvement of each symptom and objective test result, carbomer gel was more effective than 1% CMC group （P〈0.01）. In conclusion, carbomer gel had longer precorneal residence time and was more effective than 1% CMC in the treatment of patients with dry eyes.
基金the financial support from the National Natural Science Foundation of China(No.51774041)。
文摘Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.
基金financially supported by the Central University Basic Scientific Research Project of China(No.2572014DB01)
文摘We prepared spherical microcapsules modified by carboxymethyl cellulose（CMC） with urea-formaldehyde（UF） resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmic features, chemical structure, and thermal performance of the microcapsules by SEM, FTIR, DSC, and TGA. We studied the effects of different experimental parameters of curing p H, the amounts of the emulsifier and emulsion speed. The CMC-UF microcapsules had good heat resistance and stability. The enthalpy of CMC-UF microcapsules reached 50.33 J g-1. Therefore, CMC-UF resin can be used as a potential wall material of phase change materials.
基金This study was supported by the National Visiting Scholar Program for Key Young Teachers of Central and Western Universities,the Ministry of Education(19042)the Key Science and Technology Project of Henan Province(212102310064)the National Innovation and Entrepreneurship Training Program for College Students,Ministry of Education(202111517002).
文摘To achieve optimal recovery and value-added utilisation of cellulose in peanut shells,the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method.Then,cellulose hydrogel was prepared by graft copolymerisation using N,N’-methylenebisacrylamide as the cross-linking agent,sodium persulfate as the initiator,and acrylic acid as the monomer.Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g,initiator dosage of 0.20 g,polymerisation temperature of 70°C,cross-linking agent of 0.25 g,and monomer dosage of 3.0 mL.The effect of initiator dosage on hydrogel synthesis was the most significant,followed by monomer dosage and reaction temperature.Characterisation using X-ray diffraction analysis and scanning electron microscopy revealed that the hydrogel was amorphous and exhibited a distinct three-dimensional double network structure.Hydrogel swelling kinetic analysis showed that the hydrogel swelling process was divided into three stages,and fitted the Schott secondary swelling kinetic model.The prepared hydrogel had a good adsorption effect on methylene blue;the adsorption of methylene blue by the hydrogel was 1.259 mg/g at 25°C when the initial concentration of methylene blue was 5 mg/L.The adsorption kinetics of the hydrogel fit the pseudo-first-order kinetic model,pseudo-secondorder kinetic model,Eovich model and particle diffusion model.The best fitting effect was obtained with the pseudo-second-order kinetic model.The adsorption isotherm analysis of methylene blue on hydrogel showed that the adsorption process was consistent with Langmuir and Freundlich models.The correlation coefficient of the Freundlich isotherm model was higher,indicating that the adsorption of methylene blue on hydrogel was mainly chemisorption.
基金supported by the National Natural Science Foundation of China(No.21778052 and No.21975240)by the Natural Science Foundation of Anhui Province(No.1908085J19)the Talent Research Foundation of Hefei University(No.18-19RC08)。
文摘Conductive ionic hydrogels(CIH)have been widely studied for the development of stretchable electronic devices,such as sensors,electrodes,and actuators.Most of these CIH are made into 3D or 2D shape,while 1D CIH(hydrogel fibers)is often difficult to make because of the low mechanical robustness of common CIH.Herein,we use gel spinning method to prepare a robust CIH fiber with high strength,large stretchability,and good conductivity.The robust CIH fiber is drawn from the composite gel of sodium polyacrylate(PAAS)and sodium carboxymethyl cellulose(CMC).In the composite CIH fiber,the soft PAAS presents good conductivity and stretchability,while the rigid CMC significantly enhances the strength and toughness of the PAAS/CMC fiber.To protect the conductive PAAS/CMC fiber from damage by water,a thin layer of hydrophobic polymethyl acrylate(PMA)or polybutyl acrylate(PBA)is coated on the PAAS/CMC fiber as a water-resistant and insulating cover.The obtained PAAS/CMC-PMA and PAAS/CMC-PBA CIH fibers present high tensile strength(up to 28 MPa),high tensile toughness(up to 43 MJ/m~3),and good electrical conductivity(up to 0.35 S/m),which are useful for textile-based stretchable electronic devices.
基金supported by the Special Fund for National Forestry Industry Scientific Research in the Public Interest of China (Grant No. 201104004)the Natural Science Foundation of China (Grant No. 20867004)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region
文摘A series of carboxymethyl cellulose/organic montmorillonite （CMC/OMMT） nanocomposites with different weight ratios of carboxymethyl cellulose （CMC） to organic montmorillonite （OMMT） were synthesized under different conditions. The nanocomposites were characterized by the Fourier transform infrared （FT-IR） spectrophotometer, X-ray diffraction （XRD） method, transmission electron microscope （TEM）, scanning electron microscope （SEM）, and thermal gravimetric （TG） analysis. The results showed that the introduction of CMC may have different influences on the physico-chemical properties of OMMT and intercalated-exfoliated nanostructures were formed in the nanocomposites. The effects of different reaction conditions on the adsorption capacity of samples for Congo Red （CR） dye were investigated by controlling the amount ofhexadecyl trimethyl ammonium bromide （CTAB）, the weight ratio of CMC to OMMT, the reaction time, and the reaction temperature. Results from the adsorption experiment showed that the adsorption capacity of the nanocomposites can reach 171.37 rag/g, with the amount of CTAB being 1.0 cation exchange capacity （CEC） of MMT, the weight ratio of CMC to OMMT being l：l, the reaction time being 6 h, and the reaction temperature being 60~C. The CMC/OMMT nanocomposite can be used as a potential adsorbent to remove CR dye from an aqueous solution.
基金Basic Research Foundation of Beijing Institute of Technology (BIT-UBF-200504E4202)
文摘The two kinds of super absorbent resins from carboxymethyl cellulose were synthesized with the potassium persulphate and methylenebisacrylamide as initiator and cross linker respectively by radical polymerization in aqueous solution. Thestructures of the two resins were characterized with Fourier transform infrared spectroscopy FTIR, scanning electron miscroscopy （SEM）, and environment scanning electron miscroscopy （ESEM）, the results indicate that the fibriform of the carboxymethyl cellulose （CMC） is disappeared and the crusslink networks in eopolymer of carboxymethyl cellulose-graft-polyacrylic acid（CMC-g-PAA） are denser than that of eopolymer of carboxymethyl cellulose-graft-poly （acrylic acid-co-N-vinyl Pyrrolidone） （CMC-g- PAA-co-PVP）. The comparison between the two resins in absorption capacities is that CMC-g-PAA is better in the water-keep capability being heated, while CMC-g-PAA-co-PVP is better in the water absorbency and salt resistance.
基金TUBITAK(104T417) for partially supporting the work by providing us withthe necessary equipment
文摘The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L-1 HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298-328 K. The associated apparent activation energy (E*a ) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.
基金National Key Research and Development Program of China(Grant No.2017YFA0104302)the National Natural Science Innovative Research Group Project(Grant No.61821002)+1 种基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20190938)the Key Projects of the National Natural Science Foundation of China(Grant No.51832001).
文摘Oral iron supplements such as ferrous iron salts are major treatment agents for iron deficiency anemia(IDA)due to the convenience of large dose administration and good patient compliance.However,the gastrointestinal adverse impact caused by Fe2+stimulus and low bioavailability severely impedes its therapeutic effects.In recent years,it has been found that nano iron⁃based nanoparticles with high surface⁃to⁃volume ratio and low iron ion leakage can alleviate the toxic effect and improve the gastrointestinal absorbance.For further clinical development,nano materials need to meet the pharmaceutical quality demand.Carboxymethyl cellulose(CMC)is a significant pharmaceutical ingredient applied in approved drug formulations,and polyglucosorbitol carboxymethylether(PSC)has been utilized in iron⁃based nanomedicine ferumoxytol synthesis,both of which can be firmly anchored on iron oxide by carboxyl chelation.In this work,iron oxide nanoparticles(NPs)modified with CMC were designed and synthesized,and the structure composition and physicochemical properties were distinctly characterized.Oral supplement effects on rat IDA were investigated and compared with other recently reported iron supplements including NPs modified with PSC.Results show that the oral nano iron supplement achieved the recovery of hemoglobin and serum iron level in only two weeks with high safety.The nano iron oxide modified with pharmaceutical excipients provides new potential approach for oral iron supplement available in clinics.
文摘Biopolymer electrolyte based on carboxymethyl cellulose has been prepared by doping with different concentration of oleic acid via solution casting technique. Fourier Transform Infrared spectroscopy was used to study the complexation between the salt and polymer. New peak was observed at 1710, 2850, 2920 cm-1. X-ray diffraction study reveals the amorphous nature of the biopolymer electrolyte. Impedance study shows the highest ionic conductivity, σ, was found to be 2.11 × 10-5 S·cm-1 at room temperature (303 K) for sample containing 20 wt.% of oleic acid and the biopolymer electrolyte obeys Arrhenius behaviour.
基金the Institute of Particle and Science Engineering,University of Leeds and Procter & Gamble Newcastle Innovation Centre(UK) for partially funding the project
文摘Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium carbonate tablets are carried out at various temperatures.The dissolution process of each tablet is measured by electrical conductivity tracking method and the concentration of dissolved sodium carbonate is quanti fied with calibrated conductivity-concentration converting equation of sodium carbonate.The quanti fied dissolution data is fitted with both surface reaction model and diffusion layer model and the results clearly show that surface reaction model is suggested as the appropriate dissolution model for all measured tablets.Therefore,it is determined that carboxymethyl cellulose is a stable element to remain the dissolution mechanism of tablet unchanged.The dissolution rate constant quanti fied with surface reaction model presents that carboxymethyl cellulose-sodium carbonate two-component tablets obtain signi ficant higher dissolution rate constant than pure sodium carbonate tablet and higher proportion of carboxymethyl cellulose leads to apparent higher dissolution rate constant.The results prove for the usage of carboxymethyl cellulose in most practical applications at a relative low-level,the effect of carboxymethyl cellulose is effective and positive for two-component tablet to enhance the dissolution process and improve dissolution rate constant and this effect is speculated coming from its dynamic physical transforming process in water including dilation and conglutination.
文摘In this research it was shown that mineral surface metal-lic sites played a decisive role in carboxymethyl cellulose (CMC) adsorp-tion, and surface hydrophobicity alone did not have significant effects. Both the carboxymethyl groups and the hydroxyl groups of the CMC par-ticipated in the interaction with mineral surface, with the carboxymethyl groups interacting with metal and metal hydroxyl species, and hydroxyl groups interacting with metal hydroxide species, respectively.
文摘A silica-supported carboxymethylcellulose platinum complex (abbreviated as SiO_2-CMC-Pt) has been prepared and characterized by XPS. Its catalytic properties for hydro-genation of aromatic compounds were studied. The results showed that this catalystcould catalyze the hydrogenation of phenol, anisol, p-cresol, benzene and toluene to cyclo-hexanol, cyclohexyl methyl ether, p-methyl cyclohexanol, cyclohexane and methylcyclo-hexane, respectively in 100% yield at 30℃ and 1 atm. In the hydrogenation of phenol,COO/Pt ratio in SiO_2-CMC-Pt has much influence on the initial hydrogenation rate andthe selectivity for the intermediate product, cyclohexanone. The highest initial rate andthe highest yield of cyclohexanone both occur at COO/Pt ratio of 6. The complex is stableduring the reaction and can be used repeatedly.
基金National Natural Science Foundation of China(No.51373032)Innovation Program of Shanghai Municipal Education Commission,China+1 种基金Fundamental Research Funds for the Central University,ChinaDHU Distinguished Young Professor Program,China
文摘Carboxymethyl cellulose(CMC) fibers were produced by extruding the CMC solution into the metal salt coagulation bath and collected with a winding machine.It was found that copper chloride,ferric chloride,cerium chloride,lanthanum chloride and aluminum nitrate solution could be used as coagulation bath to prepare CMC fibers,whereas the metal salt solutions,such as nickel chloride,zinc chloride,calcium chloride and magnesium chloride,could not.The fiber formation is due to the coordination between the carboxylates of CMC and metal ion.Fourier transform infrared spectroscopy(FTIR) was applied to studying the coordination mode of CMC and metal ion.The metal salt concentration,pH value and temperature of the coagulation bath affect the tenacity and elongation of the fiber.CMC fibers show good water uptake ability and can adsorb water more than 200% of its own weight.The mechanical behaviors of CMC fiber show dependence on environment humidity.
基金This work is supported by the National Forestry and Grassland Administration/Beijing Open Fund of Key Laboratory of Bamboo and Rattan Science and Technology(Grant No.ICBR-2020-10)University Scientific Research Project of Anhui Province(Grant No.KJ2020A0130).
文摘Bamboo harvesting residues are wastes by-products of bamboo industries that contain holocellulose for about 63.14%to 70.71%,which often be discarded,incinerated or buried.In this study,carboxymethyl cellulose was prepared from bamboo harvesting residues(bamboo-branch and bamboo-tip)as raw materials.The chemical composition of bamboo harvesting residues,the viscosity and degree of substitution of carboxymethyl cellulose were determined.Carboxymethyl cellulose obtained was further characterized and compared by means of FTIR,SEM,XRD and TG.Results showed that under the optimized identical conditions,the viscosity and degree of substitution of carboxymethyl cellulose from bamboo-branch and bamboo-tip were 6.0 and 78.9 mPa·s,0.75 and 0.89,respectively.Carboxymethyl cellulose obtained from bamboo-tip displayed a lower crystallinity and a better thermal stability as compared to synthetic carboxymethyl cellulose obtained from bamboo-branch and bamboo-culm.
文摘A multifunctional nanoparticle based on carboxymethyl cellulose was developed. Folate group was attached to nanoparticle for specific recognition of cancerous cells and 5FU was encapsulated for delivering cytotoxicity. The whole system was able to track by the semiconductor quantum dots that were attached to the nanoparticle. The multifunctional nanoparticle was characterized by UV-VIS spectra, PL spectra, FTIR, TEM, SEM etc and was targeted to human breast cancer cell, MCF7. The biocompatibility of nanoparticle without drug and cytotoxicity rendered by nanoparticle with drug was studied with MCF7 and L929 cell lines. The epifluorescent images suggest that the folate-conjugated nanoparticles were more internalized by folate receptor positive cell line, MCF7 than the noncancerous L929 cells.
文摘Carboxymethyl cellulose hydrogels were developed through crosslinking process using eco-friendly crosslinkers such as maleic,succinic,and citric acids.Carboxymethyl cellulose was prepared from the cellulosic fraction of olive industry residues.A series of hydrogels with varying crosslinker acid concentrations,reaction times,and reaction temperatures was produced to study the swelling capacities and gel fraction of the obtained hydrogels.Additional study pertains to the preparation of antimicrobial nanocomposite hydrogels through in-situ incorporation of the silver nanoparticles during the crosslinking reaction.Silver nanoparticles were prepared by reduction of AgNO3 with leaves of Ricinus communis.The particle size of prepared silver nanoparticles was detected by transmission electron microscopy(TEM).Chemical structure and morphological characterizations of the prepared hydrogels were performed using Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and energy-dispersive X-ray spectroscopy(EDX).Finally,the antimicrobial activity of the loaded silver hydrogels against Gram negative(G-ve),Gram positive(G+ve),and Candida albicans yeast was demonstrated.
