To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore...To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore the lunar subsurface structure by using ground penetrating radar with high resolution. We have probed the subsur- face to a depth of several hundred meters using LPR. In-orbit testing, data processing and the preliminary results are presented. These observations have revealed the con- figuration of regolith where the thickness of regolith varies from about 4 m to 6 m. In addition, one layer of lunar rock, which is about 330 m deep and might have been accumulated during the depositional hiatus of mare basalts, was detected.展开更多
The Extreme Ultraviolet Camera （EUVC） onboard the Chang＇e-3 （CE-3） lander is used to observe the structure and dynamics of Earth＇s plasmasphere from the Moon. By detecting the resonance line emission of helium i...The Extreme Ultraviolet Camera （EUVC） onboard the Chang＇e-3 （CE-3） lander is used to observe the structure and dynamics of Earth＇s plasmasphere from the Moon. By detecting the resonance line emission of helium ions （He＋） at 30.4 nm, the EUVC images the entire plasmasphere with a time resolution of 10 min and a spatial resolution of about 0.1 Earth radius （RE） in a single frame. We first present details about the data processing from EUVC and the data acquisition in the commissioning phase, and then report some initial results, which reflect the basic features of the plas- masphere well. The photon count and emission intensity of EUVC are consistent with previous observations and models, which indicate that the EUVC works normally and can provide high quality data for future studies.展开更多
The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from whi...The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.展开更多
In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large...In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large amount of experiments. By reducing the group interval, the low frequency signal are enhanced instead of been attenuated. Fur-thermore, to solve the problem that the precision of Rayleigh wave exploration method count much to the signal-to-noise ratio, some preprocessing methods were put forward. By using zero shift rectifying, digital F-K filtering and cutting, noises can be effectively eliminated.展开更多
The terrain camera （TCAM） and panoramic camera （PCAM） are two of the major scientific payloads installed on the lander and rover of the Chang＇e 3 mission re- spectively. They both use a Bayer color filter array c...The terrain camera （TCAM） and panoramic camera （PCAM） are two of the major scientific payloads installed on the lander and rover of the Chang＇e 3 mission re- spectively. They both use a Bayer color filter array covering CMOS sensor to capture color images of the Moon＇s surface. RGB values of the original images are related to these two kinds of cameras. There is an obvious color difference compared with human visual perception. This paper follows standards published by the International Commission on Illumination to establish a color correction model, designs the ground calibration experiment and obtains the color correction coefficient. The image qual- ity has been significantly improved and there is no obvious color difference in the corrected images. Ground experimental results show that： （1） Compared with uncor- rected images, the average color difference of TCAM is 4.30, which has been reduced by 62.1%. （2） The average color differences of the left and right cameras in PCAM are 4.14 and 4.16, which have been reduced by 68.3% and 67.6% respectively.展开更多
Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surfa...Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surface environment. To better understand the environment of this region, this paper utilizes the available high-resolution topography data, image data and geological data to carry out a detailed analysis and research on the area surrounding the landing site （Sinus Iridum and 45 km×70 km of the landing area） as well as on the topography, landform, geology and lunar dust of the area surrounding the landing site. A general topographic analysis of the surrounding area is based on a digital elevation model and digital elevation model data acquired by Chang＇e-2 that have high resolution; the geology analysis is based on lunar geological data published by USGS; the study on topographic factors and distribution of craters and rocks in the surrounding area covering 4km^4km or even smaller is based on images from the CE-3 landing camera and images from the topographic camera; an analysis is done of the effect of the CE-3 engine plume on the lunar surface by comparing images before and after the landing using data from the landing camera. A comprehensive analysis of the results shows that the landing site and its surrounding area are identified as typical lunar mare with flat topography. They are suitable for maneuvers by the rover, and are rich in geological phenomena and scientific targets, making it an ideal site for exploration.展开更多
We observed the open clusters NGC 1664 （43 exposures） and M35 （42 ex- posures） by the Yunnan Faint Object Spectrograph and Camera in the 2.4 m telescope at Yunnan Astronomical Observatory on 2011 January 3, and pr...We observed the open clusters NGC 1664 （43 exposures） and M35 （42 ex- posures） by the Yunnan Faint Object Spectrograph and Camera in the 2.4 m telescope at Yunnan Astronomical Observatory on 2011 January 3, and processed them by a method recently proposed by us. The result shows that there is a geometric distortion effect in the field of view and the maximum distortion is - 0.25 （i.e. 1 pixel）. After correcting the geometric distortion, the precision of stellar positional measurement is significantly improved. The best precision in each direction is 6 mas for well-exposed stars.展开更多
An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and anal...An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.展开更多
Terrain classification is one of the critical steps used in lunar geomorphologic analysis and landing site selection. Most of the published works have focused on a Digital Elevation Model （DEM） to distinguish differ...Terrain classification is one of the critical steps used in lunar geomorphologic analysis and landing site selection. Most of the published works have focused on a Digital Elevation Model （DEM） to distinguish different regions of lunar terrain. This paper presents an algorithm that can be applied to lunar CCD images by blocking and clustering according to image features, which can accurately distinguish between lunar highland and lunar mare. The new algorithm, compared with the traditional algo- rithm, can improve classification accuracy. The new algorithm incorporates two new features and one Tamura texture feature. The new features are generating an enhanced image histogram and modeling the properties of light reflection, which can represent the geological characteristics based on CCD gray level images. These features are ap- plied to identify texture in order to perform image clustering and segmentation by a weighted Euclidean distance to distinguish between lunar mare and lunar highlands. The new algorithm has been tested on Chang＇e-1 CCD data and the testing result has been compared with geological data published by the U.S. Geological Survey. The result has shown that the algorithm can effectively distinguish the lunar mare from highlands in CCD images. The overall accuracy of the proposed algorithm is satisfactory, and the Kappa coefficient is 0.802, which is higher than the result of combining the DEM with CCD images.展开更多
Observation and research on solar radio emission have unique scientific values in solar and space physics and related space weather forecasting applications, since the observed spectral structures may carry important ...Observation and research on solar radio emission have unique scientific values in solar and space physics and related space weather forecasting applications, since the observed spectral structures may carry important information about energetic electrons and underlying physical mechanisms. In this study, we present the design of a novel dynamic spectrograph that has been installed at the Chashan Solar Radio Observatory operated by the Laboratory for Radio Technologies, Institute of Space Sciences at Shandong University. The spectrograph is characterized by real-time storage of digitized radio intensity data in the time domain and its capability to perform off-line spectral analysis of the radio spectra. The analog signals received via antennas and amplified with a low-noise amplifier are converted into digital data at a speed reaching up to 32 k data points per millisecond. The digital data are then saved into a high- speed electronic disk for further off-line spectral analysis. Using different word lengths （1-32k） and time cadences （5 ms-10 s） for off-line fast Fourier transform analysis, we can obtain the dynamic spectrum of a radio burst with different （user-defined） temporal （5 ms-10 s） and spectral （3 kHz-320kHz） resolutions. This enables great flexibility and convenience in data analysis of solar radio bursts, especially when some specific fine spectral structures are under study.展开更多
The establishment of a lunar control network is one of the core tasks in selenodesy, in which defining an absolute control point on the Moon is the most im- portant step. However, up to now, the number of absolute con...The establishment of a lunar control network is one of the core tasks in selenodesy, in which defining an absolute control point on the Moon is the most im- portant step. However, up to now, the number of absolute control points has been very sparse. These absolute control points have mainly been lunar laser ranging retrore- flectors, whose geographical location can be observed by observations on Earth and also identified in high resolution lunar satellite images. The Chang＇e-3 （CE-3） probe successfully landed on the Moon, and its geographical location has been monitored by an observing station on Earth. Since its positional accuracy is expected to reach the meter level, the CE-3 landing site can become a new high precision absolute control point. We use a sequence of images taken from the landing camera, as well as satellite images taken by CE-1 and CE-2, to identify the location of the CE-3 lander. With its geographical location known, the CE-3 landing site can be established as a new abso- lute control point, which will effectively expand the current area of the lunar absolute control network by 22%, and can greatly facilitate future research in the field of lunar surveying and mapping, as well as selenodesy.展开更多
Six high-resolution TiO-band image sequences from the New Vacuum Solar Telescope （NVST） are used to investigate the properties of intergranular bright points （igBPs）. We detect the igBPs using a Laplacian and morp...Six high-resolution TiO-band image sequences from the New Vacuum Solar Telescope （NVST） are used to investigate the properties of intergranular bright points （igBPs）. We detect the igBPs using a Laplacian and morphological dilation algorithm （LMD） and automatically track them using a three- dimensional segmentation algorithm, and then investigate the morphologic, photometric and dynamic prop- erties of igBPs in terms of equivalent diameter, intensity contrast, lifetime, horizontal velocity, diffusion index, motion range and motion type. The statistical results confirm previous studies based on G-band or TiO-band igBPs from other telescopes. These results illustrate that TiO data from the NVST are stable and reliable, and are suitable for studying igBPs. In addition, our method is feasible for detecting and track- ing igBPs with TiO data from the NVST. With the aid of vector magnetograms obtained from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager, the properties of igBPs are found to be strongly influenced by their embedded magnetic environments. The areal coverage, size and intensity contrast values of igBPs are generally larger in regions with higher magnetic flux. However, the dynamics of igBPs, includ- ing the horizontal velocity, diffusion index, ratio of motion range and index of motion type are generally larger in the regions with lower magnetic flux. This suggests that the absence of strong magnetic fields in the medium makes it possible for the igBPs to look smaller and weaker, diffuse faster, and move faster and further along a straighter path.展开更多
We investigate the nonlinear behaviors of light recognized as chaos during the propagation of Gaussian laser beam inside a nonlinear polarization maintaining and absorption reducing （PANDA） ring resonator system. It...We investigate the nonlinear behaviors of light recognized as chaos during the propagation of Gaussian laser beam inside a nonlinear polarization maintaining and absorption reducing （PANDA） ring resonator system. It aims to generate the nonlinear behavior of light to obtain data in binary logic codes for transmission in fiber optics communication. Effective parameters, such as refractive indices of a silicon waveguide, coupling coefficients （~）, and ring radius ring （R）, can be properly selected to operate the nonlinear behavior. Therefore, the binary coded data generated by the PANDA ring resonator system can be decoded and converted to Manchester codes, where the decoding process of the transmitted codes occurs at the end of the transmission link. The simulation results show that the original codes can be recovered with a high security of signal transmission using the Manchester method.展开更多
Due to the low spatial resolution of images taken from the Chang＇e-1 （CE-I） orbiter, the details of the lunar surface are blurred and lost. Considering the limited spatial resolution of image data obtained by a CCD...Due to the low spatial resolution of images taken from the Chang＇e-1 （CE-I） orbiter, the details of the lunar surface are blurred and lost. Considering the limited spatial resolution of image data obtained by a CCD camera on CE-1, an example-based super-resolution （SR） algorithm is employed to obtain high- resolution （HR） images. SR reconstruction is important for the application of image data to increase the resolution of images. In this article, a novel example-based algorithm is proposed to implement SR reconstruction by single-image analysis, and the computational cost is reduced compared to other example-based SR methods. The results show that this method can enhance the resolution of images using SR and recover detailed information about the lunar surface. Thus it can be used for surveying HR terrain and geological features. Moreover, the algorithm is significant for the HR processing of remotely sensed images obtained by other imaging systems.展开更多
With the fast increase in the resolution of astronomical images, the question of how to process and transfer such large images has become a key issue in astronomy. We propose a new real-time compression and fast recon...With the fast increase in the resolution of astronomical images, the question of how to process and transfer such large images has become a key issue in astronomy. We propose a new real-time compression and fast reconstruction algorithm for astronomical images based on compressive sensing techniques. We first reconstruct tile Original signal with fewer measurements, according to its compressibility. Then, based on the characteristics of astronomical images, we apply Daubechies orthogonal wavelets to obtain a sparse representation. A matrix representing a random Fourier ensembleis used to obtain a sparse representation in a lower dimensional space. For reconstructing the image, we propose a novel minimum total variation with block addptive sensing to balance the accuracy and eomputation time. Our experimental results show that the proposed algorithm can efficiently reconstruct colorful astronomicai images with high resolution and improve the applicability of compressed sensing.展开更多
The quality of full-disk solar Hα images is significantly degraded by stripe interference. In this paper, to improve the analysis of morphological evolution, a robust solution for stripe interference removal in a par...The quality of full-disk solar Hα images is significantly degraded by stripe interference. In this paper, to improve the analysis of morphological evolution, a robust solution for stripe interference removal in a partial full-disk solar Hα image is proposed. The full-disk solar image is decomposed into a set of support value images on different scales by convolving the image with a sequence of multiscale support value filters, which are calculated from the mapped least-squares support vector machines （LS-SVMs）. To match the resolution of the support value images, a scale-adaptive LS-SVM regression model is used to remove stripe interference from the support value images. We have demonstrated the advantages of our method on solar Hα images taken in 2001-2002 at the Huairou Solar Observing Station. Our experimental results show that our method can remove the stripe interference well in solar Hα images and the restored image can be used in morphology researches.展开更多
基金Supported by the National Natural Science Foundation of China
文摘To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore the lunar subsurface structure by using ground penetrating radar with high resolution. We have probed the subsur- face to a depth of several hundred meters using LPR. In-orbit testing, data processing and the preliminary results are presented. These observations have revealed the con- figuration of regolith where the thickness of regolith varies from about 4 m to 6 m. In addition, one layer of lunar rock, which is about 330 m deep and might have been accumulated during the depositional hiatus of mare basalts, was detected.
文摘The Extreme Ultraviolet Camera （EUVC） onboard the Chang＇e-3 （CE-3） lander is used to observe the structure and dynamics of Earth＇s plasmasphere from the Moon. By detecting the resonance line emission of helium ions （He＋） at 30.4 nm, the EUVC images the entire plasmasphere with a time resolution of 10 min and a spatial resolution of about 0.1 Earth radius （RE） in a single frame. We first present details about the data processing from EUVC and the data acquisition in the commissioning phase, and then report some initial results, which reflect the basic features of the plas- masphere well. The photon count and emission intensity of EUVC are consistent with previous observations and models, which indicate that the EUVC works normally and can provide high quality data for future studies.
基金supported by the National Natural Science Foundation of China (Grant No. 11173038)
文摘The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.
文摘In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large amount of experiments. By reducing the group interval, the low frequency signal are enhanced instead of been attenuated. Fur-thermore, to solve the problem that the precision of Rayleigh wave exploration method count much to the signal-to-noise ratio, some preprocessing methods were put forward. By using zero shift rectifying, digital F-K filtering and cutting, noises can be effectively eliminated.
基金Supported by the National Natural Science Foundation of China
文摘The terrain camera （TCAM） and panoramic camera （PCAM） are two of the major scientific payloads installed on the lander and rover of the Chang＇e 3 mission re- spectively. They both use a Bayer color filter array covering CMOS sensor to capture color images of the Moon＇s surface. RGB values of the original images are related to these two kinds of cameras. There is an obvious color difference compared with human visual perception. This paper follows standards published by the International Commission on Illumination to establish a color correction model, designs the ground calibration experiment and obtains the color correction coefficient. The image qual- ity has been significantly improved and there is no obvious color difference in the corrected images. Ground experimental results show that： （1） Compared with uncor- rected images, the average color difference of TCAM is 4.30, which has been reduced by 62.1%. （2） The average color differences of the left and right cameras in PCAM are 4.14 and 4.16, which have been reduced by 68.3% and 67.6% respectively.
基金Supported by the National Natural Science Foundation of China
文摘Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surface environment. To better understand the environment of this region, this paper utilizes the available high-resolution topography data, image data and geological data to carry out a detailed analysis and research on the area surrounding the landing site （Sinus Iridum and 45 km×70 km of the landing area） as well as on the topography, landform, geology and lunar dust of the area surrounding the landing site. A general topographic analysis of the surrounding area is based on a digital elevation model and digital elevation model data acquired by Chang＇e-2 that have high resolution; the geology analysis is based on lunar geological data published by USGS; the study on topographic factors and distribution of craters and rocks in the surrounding area covering 4km^4km or even smaller is based on images from the CE-3 landing camera and images from the topographic camera; an analysis is done of the effect of the CE-3 engine plume on the lunar surface by comparing images before and after the landing using data from the landing camera. A comprehensive analysis of the results shows that the landing site and its surrounding area are identified as typical lunar mare with flat topography. They are suitable for maneuvers by the rover, and are rich in geological phenomena and scientific targets, making it an ideal site for exploration.
基金supported by the National Natural Science Foundation of China(Grant Nos. 10973007, 11273014)the open fund of the Key Laboratory of Modern Astronomy and Astrophysics (Nanjing University), Ministry of Education, China
文摘We observed the open clusters NGC 1664 （43 exposures） and M35 （42 ex- posures） by the Yunnan Faint Object Spectrograph and Camera in the 2.4 m telescope at Yunnan Astronomical Observatory on 2011 January 3, and processed them by a method recently proposed by us. The result shows that there is a geometric distortion effect in the field of view and the maximum distortion is - 0.25 （i.e. 1 pixel）. After correcting the geometric distortion, the precision of stellar positional measurement is significantly improved. The best precision in each direction is 6 mas for well-exposed stars.
基金Supported by the National Natural Science Foundation of China
文摘An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.
基金supported by the Science and Technology Development Fund, Macao SAR, China (No. 048/2012/A2)
文摘Terrain classification is one of the critical steps used in lunar geomorphologic analysis and landing site selection. Most of the published works have focused on a Digital Elevation Model （DEM） to distinguish different regions of lunar terrain. This paper presents an algorithm that can be applied to lunar CCD images by blocking and clustering according to image features, which can accurately distinguish between lunar highland and lunar mare. The new algorithm, compared with the traditional algo- rithm, can improve classification accuracy. The new algorithm incorporates two new features and one Tamura texture feature. The new features are generating an enhanced image histogram and modeling the properties of light reflection, which can represent the geological characteristics based on CCD gray level images. These features are ap- plied to identify texture in order to perform image clustering and segmentation by a weighted Euclidean distance to distinguish between lunar mare and lunar highlands. The new algorithm has been tested on Chang＇e-1 CCD data and the testing result has been compared with geological data published by the U.S. Geological Survey. The result has shown that the algorithm can effectively distinguish the lunar mare from highlands in CCD images. The overall accuracy of the proposed algorithm is satisfactory, and the Kappa coefficient is 0.802, which is higher than the result of combining the DEM with CCD images.
基金supported by the National Natural Science Foundation of China(41331068,11503014 and U1431103)the China Postdoctoral Science Foundation(2016M600538)
文摘Observation and research on solar radio emission have unique scientific values in solar and space physics and related space weather forecasting applications, since the observed spectral structures may carry important information about energetic electrons and underlying physical mechanisms. In this study, we present the design of a novel dynamic spectrograph that has been installed at the Chashan Solar Radio Observatory operated by the Laboratory for Radio Technologies, Institute of Space Sciences at Shandong University. The spectrograph is characterized by real-time storage of digitized radio intensity data in the time domain and its capability to perform off-line spectral analysis of the radio spectra. The analog signals received via antennas and amplified with a low-noise amplifier are converted into digital data at a speed reaching up to 32 k data points per millisecond. The digital data are then saved into a high- speed electronic disk for further off-line spectral analysis. Using different word lengths （1-32k） and time cadences （5 ms-10 s） for off-line fast Fourier transform analysis, we can obtain the dynamic spectrum of a radio burst with different （user-defined） temporal （5 ms-10 s） and spectral （3 kHz-320kHz） resolutions. This enables great flexibility and convenience in data analysis of solar radio bursts, especially when some specific fine spectral structures are under study.
基金Supported by the National Natural Science Foundation of China
文摘The establishment of a lunar control network is one of the core tasks in selenodesy, in which defining an absolute control point on the Moon is the most im- portant step. However, up to now, the number of absolute control points has been very sparse. These absolute control points have mainly been lunar laser ranging retrore- flectors, whose geographical location can be observed by observations on Earth and also identified in high resolution lunar satellite images. The Chang＇e-3 （CE-3） probe successfully landed on the Moon, and its geographical location has been monitored by an observing station on Earth. Since its positional accuracy is expected to reach the meter level, the CE-3 landing site can become a new high precision absolute control point. We use a sequence of images taken from the landing camera, as well as satellite images taken by CE-1 and CE-2, to identify the location of the CE-3 lander. With its geographical location known, the CE-3 landing site can be established as a new abso- lute control point, which will effectively expand the current area of the lunar absolute control network by 22%, and can greatly facilitate future research in the field of lunar surveying and mapping, as well as selenodesy.
基金the support received from the National Natural Science Foundation of China (Nos. 11573012, 11303011, 11263004, 11163004 and U1231205)the Open Research Program of the Key Laboratory of Solar Activity of the Chinese Academy of Sciences (Nos. KLSA201414 and KLSA201505)
文摘Six high-resolution TiO-band image sequences from the New Vacuum Solar Telescope （NVST） are used to investigate the properties of intergranular bright points （igBPs）. We detect the igBPs using a Laplacian and morphological dilation algorithm （LMD） and automatically track them using a three- dimensional segmentation algorithm, and then investigate the morphologic, photometric and dynamic prop- erties of igBPs in terms of equivalent diameter, intensity contrast, lifetime, horizontal velocity, diffusion index, motion range and motion type. The statistical results confirm previous studies based on G-band or TiO-band igBPs from other telescopes. These results illustrate that TiO data from the NVST are stable and reliable, and are suitable for studying igBPs. In addition, our method is feasible for detecting and track- ing igBPs with TiO data from the NVST. With the aid of vector magnetograms obtained from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager, the properties of igBPs are found to be strongly influenced by their embedded magnetic environments. The areal coverage, size and intensity contrast values of igBPs are generally larger in regions with higher magnetic flux. However, the dynamics of igBPs, includ- ing the horizontal velocity, diffusion index, ratio of motion range and index of motion type are generally larger in the regions with lower magnetic flux. This suggests that the absence of strong magnetic fields in the medium makes it possible for the igBPs to look smaller and weaker, diffuse faster, and move faster and further along a straighter path.
基金Universiti Teknolog,Malaysia(UTM),and the IDF for their financial support
文摘We investigate the nonlinear behaviors of light recognized as chaos during the propagation of Gaussian laser beam inside a nonlinear polarization maintaining and absorption reducing （PANDA） ring resonator system. It aims to generate the nonlinear behavior of light to obtain data in binary logic codes for transmission in fiber optics communication. Effective parameters, such as refractive indices of a silicon waveguide, coupling coefficients （~）, and ring radius ring （R）, can be properly selected to operate the nonlinear behavior. Therefore, the binary coded data generated by the PANDA ring resonator system can be decoded and converted to Manchester codes, where the decoding process of the transmitted codes occurs at the end of the transmission link. The simulation results show that the original codes can be recovered with a high security of signal transmission using the Manchester method.
基金funded by the National Natural Science Foundation of China (Grant No. 51575388)
文摘Due to the low spatial resolution of images taken from the Chang＇e-1 （CE-I） orbiter, the details of the lunar surface are blurred and lost. Considering the limited spatial resolution of image data obtained by a CCD camera on CE-1, an example-based super-resolution （SR） algorithm is employed to obtain high- resolution （HR） images. SR reconstruction is important for the application of image data to increase the resolution of images. In this article, a novel example-based algorithm is proposed to implement SR reconstruction by single-image analysis, and the computational cost is reduced compared to other example-based SR methods. The results show that this method can enhance the resolution of images using SR and recover detailed information about the lunar surface. Thus it can be used for surveying HR terrain and geological features. Moreover, the algorithm is significant for the HR processing of remotely sensed images obtained by other imaging systems.
基金Supported by the National Natural Science Foundation of China
文摘With the fast increase in the resolution of astronomical images, the question of how to process and transfer such large images has become a key issue in astronomy. We propose a new real-time compression and fast reconstruction algorithm for astronomical images based on compressive sensing techniques. We first reconstruct tile Original signal with fewer measurements, according to its compressibility. Then, based on the characteristics of astronomical images, we apply Daubechies orthogonal wavelets to obtain a sparse representation. A matrix representing a random Fourier ensembleis used to obtain a sparse representation in a lower dimensional space. For reconstructing the image, we propose a novel minimum total variation with block addptive sensing to balance the accuracy and eomputation time. Our experimental results show that the proposed algorithm can efficiently reconstruct colorful astronomicai images with high resolution and improve the applicability of compressed sensing.
基金supported in part by the National Natural Science Fund Committee and the Chinese Academy of Sciences astronomical union funds (Grant U1331113)the Special Program for Basic Research of the Ministry of Science and Technology,China (Grant 2014FY120300)
文摘The quality of full-disk solar Hα images is significantly degraded by stripe interference. In this paper, to improve the analysis of morphological evolution, a robust solution for stripe interference removal in a partial full-disk solar Hα image is proposed. The full-disk solar image is decomposed into a set of support value images on different scales by convolving the image with a sequence of multiscale support value filters, which are calculated from the mapped least-squares support vector machines （LS-SVMs）. To match the resolution of the support value images, a scale-adaptive LS-SVM regression model is used to remove stripe interference from the support value images. We have demonstrated the advantages of our method on solar Hα images taken in 2001-2002 at the Huairou Solar Observing Station. Our experimental results show that our method can remove the stripe interference well in solar Hα images and the restored image can be used in morphology researches.
