Current research on pump-turbine units is focused on the unstable operation at off-design conditions, with the characteristic curves in generating mode being S-shaped. Unlike in the traditional water turbines, pump-tu...Current research on pump-turbine units is focused on the unstable operation at off-design conditions, with the characteristic curves in generating mode being S-shaped. Unlike in the traditional water turbines, pump-turbine operation along the S-shaped curve can lead to difficulties during load rejection with unusual increases in the water pressure, which leads to machine vibrations. This paper describes both model tests and numerical simulations. A reduced scale model of a low specific speed pump-turbine was used for the performance tests, with comparisons to computational fluid dynamics（CFD） results. Predictions using the detached eddy simulation（DES） turbulence model, which is a combined Reynolds averaged Naviers-Stokes（RANS） and large eddy simulation（LES） model, are compared with the two-equation turbulence mode results. The external characteristics as well as the internal flow are for various guide vane openings to understand the unsteady flow along the so called S characteristics of a pump-turbine. Comparison of the experimental data with the CFD results for various conditions and times shows that DES model gives better agreement with experimental data than the two-equation turbulence model. For low flow conditions, the centrifugal forces and the large incident angle create large vortices between the guide vanes and the runner inlet in the runner passage, which is the main factor leading to the S-shaped characteristics. The turbulence model used here gives more accurate simulations of the internal flow characteristics of the pump-turbine and a more detailed force analysis which shows the mechanisms controlling of the S characteristics.展开更多
The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resour...The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resource.But for cavitating flows,the above equations noticeably over-predict turbulent production and hence effective viscosity.In this paper,the detached eddy simulation（DES） method for time-dependent turbulent cavitating flows is investigated.To assess the state-of-the-art of computational capabilities,different turbulence models including the widely used RANS model and DES model are conducted.Firstly,in order to investigate the grid dependency in computations,different grid sizes are adopted in the computation.Furthermore,the credibility of DES model is supported by the unsteady cavitating flows over a 2D hydrofoil.The results show that the DES model can effectively reduce the eddy viscosities.From the experimental validations regarding the force analysis,frequency and the unsteady cavity visualizations,more favorable agreement with experimental visualizations and measurements are obtained by DES model.DES model is better able to capture unsteady phenomena including cavity length and the resulting hydrodynamic characteristics,reproduces the time-averaged velocity quantitatively around the hydrofoil,and yields more acceptable and unsteady dynamics features.The DES model has shown to be effective in improving the overall predictive capability of unsteady cavitating flows.展开更多
In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge mod...In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge model are employed, Numerical wind tunnel technology based on computational fluid dynamics(CFD) is used, and the CFD models are set as stationary models. The Reynolds number of the flow, based on the inflow velocity and the height of the vehicle, is 1.9×10~6. The computations are conducted under three cases, train on the windward track on the bridge(WWC), train on the leeward track on the bridge(LWC) and train on the flat ground(FGC). Commercial software FLUENT is used and the mesh sensitivity research is carried out by three different grids: coarse, medium and fine. Results show that compared with FGC case, the side force coefficients of the head cars for the WWC and LWC cases increases by 14% and 29%, respectively; the coefficients of middle cars for the WWC and LWC increase by 32% and 10%, respectively; and that of the tail car increases by 45% for the WWC whereas decreases by 2% for the LWC case. The most notable thing is that the side force and the rolling moment of the head car are greater for the LWC, while the side force and the rolling moment of the middle car and the tail car are greater for the WWC. Comparing the velocity profiles at different locations, the flow is significantly influenced by the bridge-train system when the air is close to it. For the three cases(WWC, LWC and FGC), the pressure on the windward side of train is mostly positive while that of the leeward side is negative. The discrepancy of train's aerodynamic force is due to the different surface area of positive pressure and negative pressure zone. Many vortices are born on the leeward edge of the roofs. Theses vortices develop downstream, detach and dissipate into the wake region. The eddies develop irregularly, leading to a noticeably turbulent flow at leeward side of train.展开更多
Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean ca...Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean cavity prediction are compared with experimental sound pressure level(SPL)data from QinetiQ,UK.DDES results agree well with the experimental data.Furthermore,comparisons are made with the predicted SPL between the three configurations to find out the effect of different passive control methods.Both the spoilers can suppress the over-all SPL up to 8dB.The main focuses of this investigation are to exam the DDES method on cavity aeroacoustic analysis and test the noise suppression effect by saw tooth spoiler and flattop spoiler.展开更多
One of the objectives of car manufacturers is to improve engine performance, reduce consumption reduce emissions. To achieve this objective, it is important to understand the phenomena involved in the combustion chamb...One of the objectives of car manufacturers is to improve engine performance, reduce consumption reduce emissions. To achieve this objective, it is important to understand the phenomena involved in the combustion chambers of engines. These phenomena are numerous and complex in nature such: the aerodynamics, fuel-air mixture, turbulence, combustion and the cycle to cycle instabilities that cause more problems. One of the factors responsible for the phenomenon of cycle to cycle variations is the instability of the characteristics of the vortex flow Tumble. This instability may be due to changes in initial conditions. This study is achieved in order to contribute in a better understanding of engine flow by using a Detached Eddy Simulation Shear-Stress Transport (DES SST) model, which is a hybrid RANS/LES model. These simulations have been performed with the commercial CFD (computational fluid dynamic) code (FLUENT) coupled with our own development based on UDF facilities given by FLUENT. To explore the suitability of the 3D DES STT to simulate the internal flow, the calculation is performed for a model tumbling flow at constant volume. This flow has been measured in an experimental set up and measurements are used to initiate and to validate simulations. For this case study, we consider simplified engine geometry. To generate tumbling motion, we use non-reacting DES with a single cycle (SC) strategy. Also, with this strategy we study the effect of initial conditions on the instabilities that accompany a vortex type tumble.展开更多
Detailed formulation of the detached-eddy simulation （DES） based on shear stress transport model （SST） was deduced. Based on finite volume method, detached-eddy simulation of super- sonic turbulent flow over rearw...Detailed formulation of the detached-eddy simulation （DES） based on shear stress transport model （SST） was deduced. Based on finite volume method, detached-eddy simulation of super- sonic turbulent flow over rearward facing step was conducted. Multi-block structured non-conform grid was designed. The obtained distribution of wall pressure coefficient along the downstream of the step was in good agreement with experiment. The structure of supersonic flow over rearward facing step is complicated and contains boundary layer-shock interaction, shock-shock interaction and sec- ondary flow separation. The predictions of the corner pressure and location of the reattachment shock are more exact than the Reynolds-averaged method. Results show that detached-eddy simulation can simulate the supersonic separated flows exactly and has advantages over Reynolds-averaged method. The partition of the detached-eddy simulation can be easily achieved by using multi-block non-conform grid, which reduces the requirement of the computational resources as well.展开更多
A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulen...A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulence model, whereas the standard k-ε(SKE) was considered here for comparison purposes. Predictions of the mean axial velocity, temperature and humidity profile have been evaluated and compared with experimental measurements. The effects of the turbulence model on the predictions of the mean axial velocity, temperature and the humidity profile are most noticeable in the(highly anisotropic) spraying region. The findings suggest that DES provide a more accurate prediction(with error less than 5%) of the flow field in a spray drying chamber compared with RANS-based k-ε models. The DES simulation also confirmed the presence of anisotropic turbulent flow in the spray dryer from the analysis of the velocity component fluctuations and turbulent structure as illustrated by the Q-criterion.展开更多
The complex flow characteristics in the tip region of a tandem cascade with tip clearance have been calculated and analyzed using Delayed Detached Eddy Simulation(DDES).The coherent mechanism of the vortex structures ...The complex flow characteristics in the tip region of a tandem cascade with tip clearance have been calculated and analyzed using Delayed Detached Eddy Simulation(DDES).The coherent mechanism of the vortex structures near the blade tip was discussed,and the unsteady behaviors and features in the tip flow field were analyzed.Additionally,the interaction between the tip leakage flow and the gap jet was revealed.The results show that,compared to the datum cascade,the blade tip load of the rear blade increases while that of the front blade decreases.Unsteady fluctuations of the tandem cascade are mainly caused by the interaction between the tip leakage flow and gap jet,and by the mixing of the vortex structures,but there is no essential change in the spectrum feature of the tip leakage flow.Finally,a detailed analysis of the development of vortices in the tip region is conducted by the topological structures of the flow field.Combined with the three-dimensional vortex structures,the schematic diagram of the vortex system of the datum single-row cascade and tandem cascade is summarized.展开更多
The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computatio...The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computational fluid dynamics（CFD） software package Fluent 6.2, the mixing characteristics in a tank agitated by dual six-blade-Rushton-turbines（6-DT） are predicted using the detached eddy simulation（DES） method. A sliding mesh（SM） approach is adopted to solve the rotation of the impeller. The simulated flow patterns and liquid velocities in the agitated tank are verified by experimental data in the literature. The simulation results indicate that the DES method can obtain more flow details than Reynolds-averaged Navier-Stokes（RANS） model. Local and global mixing time in the agitated tank is predicted by solving a tracer concentration scalar transport equation. The simulated results show that feeding points have great influence on mixing process and mixing time. Mixing efficiency is the highest for the feeding point at location of midway of the two impellers. Two methods are used to determine global mixing time and get close result. Dimensionless global mixing time remains unchanged with increasing of impeller speed. Parallel, merging and diverging flow pattern form in the agitated tank, respectively, by changing the impeller spacing and clearance of lower impeller from the bottom of the tank. The global mixing time is the shortest for the merging flow, followed by diverging flow, and the longest for parallel flow. The research presents helpful references for design, optimization and scale-up of agitated tanks with multi-impeller.展开更多
A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out,...A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out, i.e., the subcritical flow past a circular cylinder and the transonic flow over a hemisphere cylinder. For comparison, the same cases are calculated by the detached-eddy simulation （DES）, the delayed-detached eddy simulation （DDES）, and the XY-SAS approaches. Some typical results including the mean pressure coefficient, velocity, and Reynolds stress profiles are obtained and compared with the experiments. Extensive calculations show that the proposed SAS technique can give better prediction of the massively separated flow and shock/turbulent-boundary-layer interaction than the DES and DDES methods. Furthermore, by the comparison of the XY-SAS model with the present SAS model, some improvements can be obtained.展开更多
In order to study the cavitation damage in a side-wall when a sudden lateral enlargement and a vertical drop are imposed at the radial gate, a new arrangement-scheme is proposed, where the sudden lateral enlargement a...In order to study the cavitation damage in a side-wall when a sudden lateral enlargement and a vertical drop are imposed at the radial gate, a new arrangement-scheme is proposed, where the sudden lateral enlargement and the vertical drop can be imposed at the outlet of the gate chamber. The hydraulic characteristics along the side-wall are simulated by the detached eddy simulation and the Volume Of Fluid （VOF） method. The numerical results agree well with those of experiment. The experimental and numerical results show that the flow condition is smooth with only a weak water-wing appearing behind the lateral cavity, and the length of the lateral cavity becomes longer and is mainly affected by the size of the lateral enlargement and the zone of negative pressure after the water impacts the side-wall would disappear. The hydraulic characteristics of the new arrangement-scheme are beneficial to the prevention of the cavitation damage in the side-wall and the Detached Eddy Simulation （DES） with the VOF method can well predict the hydraulic characteristics after the new arrangement-scheme of the sudden lateral enlargement and the vertical drop.展开更多
In the present study, the formation of the wing-tip vortex from a rectangular NACA0015 wing with a square tip at the Reynolds number of 1.8× 105 and the angles of attack （AOA） α = 8° and 10° were sim...In the present study, the formation of the wing-tip vortex from a rectangular NACA0015 wing with a square tip at the Reynolds number of 1.8× 105 and the angles of attack （AOA） α = 8° and 10° were simulated with an incompressible detached eddy simulation （DES） method and the Reynolds averaged Navier-Stokes （RANS） equations with the SA model respectively. Numerical results were compared with experimental results to validate the capability of the employed methods in resolving tip vortex flows. The results show that DES model could capture the complicated three-dimensional structures in the vortex, and the streamwise vorticity and the cross-flow velocity agree with the experiment results quite well, but RANS-SA model with the same grid as that of DES failed to capture the correct structures and under-predicted the streamwise vorticity in the vortex by 40%. The present study suggests that under the same calculation cost, DES but not RANS-SA could be used to effectively predict the flow characteristics in tip vortex.展开更多
Cavitation and cavitation erosion often occur and seriously threaten the safe and stable operation of hydraulic machinery.However,during the operation of hydraulic machinery,the cavitation flow field is often difficul...Cavitation and cavitation erosion often occur and seriously threaten the safe and stable operation of hydraulic machinery.However,during the operation of hydraulic machinery,the cavitation flow field is often difficult to contact and measure,and the shedding and development characteristics of cavitation flow are unknown.This paper uses the Detached Eddy Simulation(DES)turbulence model and Zwart-Gerber-Belamri(ZGB)cavitation model to conduct numerical research on the cavitation flow of a twisted hydrofoil and verifies the effectiveness of numerical simulation by comparing it with experimental results.Then,based on the fractal dimension method,the number and fractal dimension of the main cavitation clusters in two different views are analyzed.The research results show that with the continuous flow of fluid,the cavitation at the tail of the hydrofoil periodically falls off,and the number of cavitation bubbles shows a strong randomness between 1 and 2.The fractal dimension method calculates that the frequency of cavitation bubbles falling off is 30 Hz.The fractal dimension of cavitation also fluctuates periodically.The fractal dimension of cavitation in the side view fluctuates between 1.30–1.38,and the fractal dimension of cavitation in the top view fluctuates between 1.31–1.42.The fractal dimension of the cavitation is closely related to the size and shape of the cavitation.By analyzing the relationship between the cavitation development process and the fractal dimension in the side view,we found the relationship between the development of cavitation in a cycle and the change of fractal dimension,which is of great significance to understanding the characteristics of cavitation flow through the image of the cavitation flow field.展开更多
This study conducts a comparative analysis between detached eddy simulation(DES)and Unsteady Reynolds-averaged Navier-Stokes(URANS)models for simulating pressure fluctuations in a stilling basin,aiming to assess the U...This study conducts a comparative analysis between detached eddy simulation(DES)and Unsteady Reynolds-averaged Navier-Stokes(URANS)models for simulating pressure fluctuations in a stilling basin,aiming to assess the URANS mode’s performance in modeling pressure fluctuation.The URANS model predicts accurately a smoother flow field and its time-average pressure,yet it underestimates the root mean square of pressure(RMSP)fluctuation,achieving approximately 70%of the results predicted by DES model on the bottom floor of the stilling basin.Compared with DES model’s results,which are in alignment with the Kolmogorov−5/3 law,the URANS model significantly overestimates low-frequency pulsations,particularly those below 0.1 Hz.We further propose a novel method for estimating the RMSP in the stilling basin using URANS model results,based on the establishment of a quantitative relationship between the RMSP,time-averaged pressure,and turbulent kinetic energy in the boundary layer.The proposed method closely aligns with DES results,showing a mere 15%error level.These findings offer vital insights for selecting appropriate turbulence models in hydraulic engineering and provide a valuable tool for engineers to estimate pressure fluctuation in stilling basins.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51139007)State Key Laboratory of Hydroscience and Engineering Open Foundation of China(Grant No.2014-KY-05)
文摘Current research on pump-turbine units is focused on the unstable operation at off-design conditions, with the characteristic curves in generating mode being S-shaped. Unlike in the traditional water turbines, pump-turbine operation along the S-shaped curve can lead to difficulties during load rejection with unusual increases in the water pressure, which leads to machine vibrations. This paper describes both model tests and numerical simulations. A reduced scale model of a low specific speed pump-turbine was used for the performance tests, with comparisons to computational fluid dynamics（CFD） results. Predictions using the detached eddy simulation（DES） turbulence model, which is a combined Reynolds averaged Naviers-Stokes（RANS） and large eddy simulation（LES） model, are compared with the two-equation turbulence mode results. The external characteristics as well as the internal flow are for various guide vane openings to understand the unsteady flow along the so called S characteristics of a pump-turbine. Comparison of the experimental data with the CFD results for various conditions and times shows that DES model gives better agreement with experimental data than the two-equation turbulence model. For low flow conditions, the centrifugal forces and the large incident angle create large vortices between the guide vanes and the runner inlet in the runner passage, which is the main factor leading to the S-shaped characteristics. The turbulence model used here gives more accurate simulations of the internal flow characteristics of the pump-turbine and a more detailed force analysis which shows the mechanisms controlling of the S characteristics.
基金supported by National Natural Science Foundation of China (Grant No.11172040)
文摘The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resource.But for cavitating flows,the above equations noticeably over-predict turbulent production and hence effective viscosity.In this paper,the detached eddy simulation（DES） method for time-dependent turbulent cavitating flows is investigated.To assess the state-of-the-art of computational capabilities,different turbulence models including the widely used RANS model and DES model are conducted.Firstly,in order to investigate the grid dependency in computations,different grid sizes are adopted in the computation.Furthermore,the credibility of DES model is supported by the unsteady cavitating flows over a 2D hydrofoil.The results show that the DES model can effectively reduce the eddy viscosities.From the experimental validations regarding the force analysis,frequency and the unsteady cavity visualizations,more favorable agreement with experimental visualizations and measurements are obtained by DES model.DES model is better able to capture unsteady phenomena including cavity length and the resulting hydrodynamic characteristics,reproduces the time-averaged velocity quantitatively around the hydrofoil,and yields more acceptable and unsteady dynamics features.The DES model has shown to be effective in improving the overall predictive capability of unsteady cavitating flows.
基金Project(U1534210)supported by the National Natural Science Foundation of ChinaProject(14JJ1003)supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2015CX003)supported by the Project of Innovation-driven Plan in Central South University,ChinaProject(14JC1003)supported by the Natural Science Foundation of Hunan Province,ChinaProject(2015T002-A)supported by the Technological Research and Development program of China Railways Cooperation
文摘In order to describe an investigation of the flow around high-speed train on a bridge under cross winds using detached-eddy simulation(DES), a 1/8th scale model of a three-car high-speed train and a typical bridge model are employed, Numerical wind tunnel technology based on computational fluid dynamics(CFD) is used, and the CFD models are set as stationary models. The Reynolds number of the flow, based on the inflow velocity and the height of the vehicle, is 1.9×10~6. The computations are conducted under three cases, train on the windward track on the bridge(WWC), train on the leeward track on the bridge(LWC) and train on the flat ground(FGC). Commercial software FLUENT is used and the mesh sensitivity research is carried out by three different grids: coarse, medium and fine. Results show that compared with FGC case, the side force coefficients of the head cars for the WWC and LWC cases increases by 14% and 29%, respectively; the coefficients of middle cars for the WWC and LWC increase by 32% and 10%, respectively; and that of the tail car increases by 45% for the WWC whereas decreases by 2% for the LWC case. The most notable thing is that the side force and the rolling moment of the head car are greater for the LWC, while the side force and the rolling moment of the middle car and the tail car are greater for the WWC. Comparing the velocity profiles at different locations, the flow is significantly influenced by the bridge-train system when the air is close to it. For the three cases(WWC, LWC and FGC), the pressure on the windward side of train is mostly positive while that of the leeward side is negative. The discrepancy of train's aerodynamic force is due to the different surface area of positive pressure and negative pressure zone. Many vortices are born on the leeward edge of the roofs. Theses vortices develop downstream, detach and dissipate into the wake region. The eddies develop irregularly, leading to a noticeably turbulent flow at leeward side of train.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Funding of Jiangsu Innovation Program for Graduate Education (KYLX_0296)the Fundamental Research Funds for the Central Universities
文摘Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean cavity prediction are compared with experimental sound pressure level(SPL)data from QinetiQ,UK.DDES results agree well with the experimental data.Furthermore,comparisons are made with the predicted SPL between the three configurations to find out the effect of different passive control methods.Both the spoilers can suppress the over-all SPL up to 8dB.The main focuses of this investigation are to exam the DDES method on cavity aeroacoustic analysis and test the noise suppression effect by saw tooth spoiler and flattop spoiler.
文摘One of the objectives of car manufacturers is to improve engine performance, reduce consumption reduce emissions. To achieve this objective, it is important to understand the phenomena involved in the combustion chambers of engines. These phenomena are numerous and complex in nature such: the aerodynamics, fuel-air mixture, turbulence, combustion and the cycle to cycle instabilities that cause more problems. One of the factors responsible for the phenomenon of cycle to cycle variations is the instability of the characteristics of the vortex flow Tumble. This instability may be due to changes in initial conditions. This study is achieved in order to contribute in a better understanding of engine flow by using a Detached Eddy Simulation Shear-Stress Transport (DES SST) model, which is a hybrid RANS/LES model. These simulations have been performed with the commercial CFD (computational fluid dynamic) code (FLUENT) coupled with our own development based on UDF facilities given by FLUENT. To explore the suitability of the 3D DES STT to simulate the internal flow, the calculation is performed for a model tumbling flow at constant volume. This flow has been measured in an experimental set up and measurements are used to initiate and to validate simulations. For this case study, we consider simplified engine geometry. To generate tumbling motion, we use non-reacting DES with a single cycle (SC) strategy. Also, with this strategy we study the effect of initial conditions on the instabilities that accompany a vortex type tumble.
文摘Detailed formulation of the detached-eddy simulation （DES） based on shear stress transport model （SST） was deduced. Based on finite volume method, detached-eddy simulation of super- sonic turbulent flow over rearward facing step was conducted. Multi-block structured non-conform grid was designed. The obtained distribution of wall pressure coefficient along the downstream of the step was in good agreement with experiment. The structure of supersonic flow over rearward facing step is complicated and contains boundary layer-shock interaction, shock-shock interaction and sec- ondary flow separation. The predictions of the corner pressure and location of the reattachment shock are more exact than the Reynolds-averaged method. Results show that detached-eddy simulation can simulate the supersonic separated flows exactly and has advantages over Reynolds-averaged method. The partition of the detached-eddy simulation can be easily achieved by using multi-block non-conform grid, which reduces the requirement of the computational resources as well.
基金Supported by the Ministry of Education Malaysia through RACE(RDU121308)and FRGS(RDU130136)
文摘A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulence model, whereas the standard k-ε(SKE) was considered here for comparison purposes. Predictions of the mean axial velocity, temperature and humidity profile have been evaluated and compared with experimental measurements. The effects of the turbulence model on the predictions of the mean axial velocity, temperature and the humidity profile are most noticeable in the(highly anisotropic) spraying region. The findings suggest that DES provide a more accurate prediction(with error less than 5%) of the flow field in a spray drying chamber compared with RANS-based k-ε models. The DES simulation also confirmed the presence of anisotropic turbulent flow in the spray dryer from the analysis of the velocity component fluctuations and turbulent structure as illustrated by the Q-criterion.
基金co-supported by the National Science and Technology Major Project,China(No.2017-Ⅱ-0001-0013)the National Natural Science Foundation of China(Nos.52106057 and 51790512)+2 种基金the Fundamental Research Funds for the Central Universities,China(No.D5000210483)the Foundation of State Level Key Laboratory of Airfoil and Cascade Aerodynamics,China(Nos.D5150210006 and D5050210015)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China(No.CX2022013).
文摘The complex flow characteristics in the tip region of a tandem cascade with tip clearance have been calculated and analyzed using Delayed Detached Eddy Simulation(DDES).The coherent mechanism of the vortex structures near the blade tip was discussed,and the unsteady behaviors and features in the tip flow field were analyzed.Additionally,the interaction between the tip leakage flow and the gap jet was revealed.The results show that,compared to the datum cascade,the blade tip load of the rear blade increases while that of the front blade decreases.Unsteady fluctuations of the tandem cascade are mainly caused by the interaction between the tip leakage flow and gap jet,and by the mixing of the vortex structures,but there is no essential change in the spectrum feature of the tip leakage flow.Finally,a detailed analysis of the development of vortices in the tip region is conducted by the topological structures of the flow field.Combined with the three-dimensional vortex structures,the schematic diagram of the vortex system of the datum single-row cascade and tandem cascade is summarized.
基金Supported by Key Scientific Research Project of Sichuan Provincial Education Department(Grant No.15ZA0107)Doctor Foundation of Southwest University of Science and Technology(Grant No.11zx7162)
文摘The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computational fluid dynamics（CFD） software package Fluent 6.2, the mixing characteristics in a tank agitated by dual six-blade-Rushton-turbines（6-DT） are predicted using the detached eddy simulation（DES） method. A sliding mesh（SM） approach is adopted to solve the rotation of the impeller. The simulated flow patterns and liquid velocities in the agitated tank are verified by experimental data in the literature. The simulation results indicate that the DES method can obtain more flow details than Reynolds-averaged Navier-Stokes（RANS） model. Local and global mixing time in the agitated tank is predicted by solving a tracer concentration scalar transport equation. The simulated results show that feeding points have great influence on mixing process and mixing time. Mixing efficiency is the highest for the feeding point at location of midway of the two impellers. Two methods are used to determine global mixing time and get close result. Dimensionless global mixing time remains unchanged with increasing of impeller speed. Parallel, merging and diverging flow pattern form in the agitated tank, respectively, by changing the impeller spacing and clearance of lower impeller from the bottom of the tank. The global mixing time is the shortest for the merging flow, followed by diverging flow, and the longest for parallel flow. The research presents helpful references for design, optimization and scale-up of agitated tanks with multi-impeller.
基金Project supported by the National Natural Science Foundation of China(No.11202100)the Natural Science Fund in Jiangsu Province(No.BK2011723)+1 种基金the Fundamental Research Funds for the Central Universities(No.NS2012032)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out, i.e., the subcritical flow past a circular cylinder and the transonic flow over a hemisphere cylinder. For comparison, the same cases are calculated by the detached-eddy simulation （DES）, the delayed-detached eddy simulation （DDES）, and the XY-SAS approaches. Some typical results including the mean pressure coefficient, velocity, and Reynolds stress profiles are obtained and compared with the experiments. Extensive calculations show that the proposed SAS technique can give better prediction of the massively separated flow and shock/turbulent-boundary-layer interaction than the DES and DDES methods. Furthermore, by the comparison of the XY-SAS model with the present SAS model, some improvements can be obtained.
基金supported by the Natural National Science Foundation of China (Grant No. 50779041)the Ph. D. Program Foundation of Ministry of Education of China (Grant No.20060610039)
文摘In order to study the cavitation damage in a side-wall when a sudden lateral enlargement and a vertical drop are imposed at the radial gate, a new arrangement-scheme is proposed, where the sudden lateral enlargement and the vertical drop can be imposed at the outlet of the gate chamber. The hydraulic characteristics along the side-wall are simulated by the detached eddy simulation and the Volume Of Fluid （VOF） method. The numerical results agree well with those of experiment. The experimental and numerical results show that the flow condition is smooth with only a weak water-wing appearing behind the lateral cavity, and the length of the lateral cavity becomes longer and is mainly affected by the size of the lateral enlargement and the zone of negative pressure after the water impacts the side-wall would disappear. The hydraulic characteristics of the new arrangement-scheme are beneficial to the prevention of the cavitation damage in the side-wall and the Detached Eddy Simulation （DES） with the VOF method can well predict the hydraulic characteristics after the new arrangement-scheme of the sudden lateral enlargement and the vertical drop.
基金supported by the National Natural Science Foundation of China(Grant No.11102110)
文摘In the present study, the formation of the wing-tip vortex from a rectangular NACA0015 wing with a square tip at the Reynolds number of 1.8× 105 and the angles of attack （AOA） α = 8° and 10° were simulated with an incompressible detached eddy simulation （DES） method and the Reynolds averaged Navier-Stokes （RANS） equations with the SA model respectively. Numerical results were compared with experimental results to validate the capability of the employed methods in resolving tip vortex flows. The results show that DES model could capture the complicated three-dimensional structures in the vortex, and the streamwise vorticity and the cross-flow velocity agree with the experiment results quite well, but RANS-SA model with the same grid as that of DES failed to capture the correct structures and under-predicted the streamwise vorticity in the vortex by 40%. The present study suggests that under the same calculation cost, DES but not RANS-SA could be used to effectively predict the flow characteristics in tip vortex.
基金supported by the National Natural Science Foundation of China,Grant No.51909131.
文摘Cavitation and cavitation erosion often occur and seriously threaten the safe and stable operation of hydraulic machinery.However,during the operation of hydraulic machinery,the cavitation flow field is often difficult to contact and measure,and the shedding and development characteristics of cavitation flow are unknown.This paper uses the Detached Eddy Simulation(DES)turbulence model and Zwart-Gerber-Belamri(ZGB)cavitation model to conduct numerical research on the cavitation flow of a twisted hydrofoil and verifies the effectiveness of numerical simulation by comparing it with experimental results.Then,based on the fractal dimension method,the number and fractal dimension of the main cavitation clusters in two different views are analyzed.The research results show that with the continuous flow of fluid,the cavitation at the tail of the hydrofoil periodically falls off,and the number of cavitation bubbles shows a strong randomness between 1 and 2.The fractal dimension method calculates that the frequency of cavitation bubbles falling off is 30 Hz.The fractal dimension of cavitation also fluctuates periodically.The fractal dimension of cavitation in the side view fluctuates between 1.30–1.38,and the fractal dimension of cavitation in the top view fluctuates between 1.31–1.42.The fractal dimension of the cavitation is closely related to the size and shape of the cavitation.By analyzing the relationship between the cavitation development process and the fractal dimension in the side view,we found the relationship between the development of cavitation in a cycle and the change of fractal dimension,which is of great significance to understanding the characteristics of cavitation flow through the image of the cavitation flow field.
基金Project supported by the Key Research and Development Plan Project of China(Grant No.2022YFC3204602)the National Natural Science Foundation of China(Grant No.U21A20157).
文摘This study conducts a comparative analysis between detached eddy simulation(DES)and Unsteady Reynolds-averaged Navier-Stokes(URANS)models for simulating pressure fluctuations in a stilling basin,aiming to assess the URANS mode’s performance in modeling pressure fluctuation.The URANS model predicts accurately a smoother flow field and its time-average pressure,yet it underestimates the root mean square of pressure(RMSP)fluctuation,achieving approximately 70%of the results predicted by DES model on the bottom floor of the stilling basin.Compared with DES model’s results,which are in alignment with the Kolmogorov−5/3 law,the URANS model significantly overestimates low-frequency pulsations,particularly those below 0.1 Hz.We further propose a novel method for estimating the RMSP in the stilling basin using URANS model results,based on the establishment of a quantitative relationship between the RMSP,time-averaged pressure,and turbulent kinetic energy in the boundary layer.The proposed method closely aligns with DES results,showing a mere 15%error level.These findings offer vital insights for selecting appropriate turbulence models in hydraulic engineering and provide a valuable tool for engineers to estimate pressure fluctuation in stilling basins.
