Dual-metal gate and gate–drain underlap designs are introduced to reduce the ambipolar current of the device based on the C-shaped pocket TFET(CSP-TFET).The effects of gate work function and gate–drain underlap leng...Dual-metal gate and gate–drain underlap designs are introduced to reduce the ambipolar current of the device based on the C-shaped pocket TFET(CSP-TFET).The effects of gate work function and gate–drain underlap length on the DC characteristics and analog/RF performance of CSP-TFET devices,such as the on-state current(I_(on)),ambipolar current(I_(amb)),transconductance(g_(m)),cut-off frequency(f_(T))and gain–bandwidth product(GBP),are analyzed and compared in this work.Also,a combination of both the dual-metal gate and gate–drain underlap designs has been proposed for the C-shaped pocket dual metal underlap TFET(CSP-DMUN-TFET),which contains a C-shaped pocket area that significantly increases the on-state current of the device;this combination design substantially reduces the ambipolar current.The results show that the CSP-DMUN-TFET demonstrates an excellent performance,including high I_(on)(9.03×10^(-4)A/μm),high I_(on)/I_(off)(~10^(11)),low SS_(avg)(~13 mV/dec),and low I_(amb)(2.15×10^(-17)A/μm).The CSP-DMUN-TFET has the capability to fully suppress ambipolar currents while maintaining high on-state currents,making it a potential replacement in the next generation of semiconductor devices.展开更多
A new high voltage trench lateral double-diffused metal–oxide semiconductor （LDMOS） with ultra-low specific onresistance （R on,sp ） is proposed. The structure features a dual gate （DG LDMOS）： a planar gate and...A new high voltage trench lateral double-diffused metal–oxide semiconductor （LDMOS） with ultra-low specific onresistance （R on,sp ） is proposed. The structure features a dual gate （DG LDMOS）： a planar gate and a trench gate inset in the oxide trench. Firstly, the dual gate can provide a dual conduction channel and reduce R on,sp dramatically. Secondly, the oxide trench in the drift region modulates the electric field distribution and reduces the cell pitch but still can maintain comparable breakdown voltage （BV）. Simulation results show that the cell pitch of the DG LDMOS can be reduced by 50% in comparison with that of conventional LDMOS at the equivalent BV; furthermore, R on,sp of the DG LDMOS can be reduced by 67% due to the smaller cell pitch and the dual gate.展开更多
A new planar split dual gate （PSDG） MOSFET device, its characteristics and experimental results, as well as the three dimensional device simulations, are reported here for the first time. Both theoretical calculatio...A new planar split dual gate （PSDG） MOSFET device, its characteristics and experimental results, as well as the three dimensional device simulations, are reported here for the first time. Both theoretical calculation and 3D simulation, as well as the experiment data, show that the two independent split dual gates can provide dynamical control of the device characteristics, such as threshold voltage （Vt） and sub-threshold swing （SS）, as well as the device saturated current. The PSDG MOSFET transistor leakage current （loft） can be reduced as much as 78% of the traditional single gate MOSFET. The PSDG is fabricated and fully compatible with our conventional 0.18 μm logic process flow.展开更多
In order to suppress drain-induced barrier lowering in dual material gate SOI MOSFETs,halo doping is used in the channel near the source. Two-dimensional analytical models of surface potential and threshold voltage fo...In order to suppress drain-induced barrier lowering in dual material gate SOI MOSFETs,halo doping is used in the channel near the source. Two-dimensional analytical models of surface potential and threshold voltage for the novel SOI MOSFET are developed based on the explicit solution of the two-dimensional Poisson＇s equation. Its characteristic improvement is investigated. It is concluded that the novel structure exhibits better suppression of drain-induced barrier lowering and higher carrier transport efficiency than conventional dual material gate SOI MOSFETs. Its drain-induced barrier lowering decreases with increasing halo doping concentration but does not change monotonically with halo length. The analytical models agree well with the two-dimensional device simulator MEDICI.展开更多
A two-dimensional analytical subthreshold behavior model for junctionless dual-material cylindrical surrounding- gate （JLDMCSG） metal-oxide-semiconductor field-effect transistors （MOSFETs） is proposed. It is deriv...A two-dimensional analytical subthreshold behavior model for junctionless dual-material cylindrical surrounding- gate （JLDMCSG） metal-oxide-semiconductor field-effect transistors （MOSFETs） is proposed. It is derived by solving the two-dimensional Poisson＇s equation in two continuous cylindrical regions with any simplifying assumption. Using this analytical model, the subthreshold characteristics of JLDMCSG MOSFETs are investigated in terms of channel electro- static potential, horizontal electric field, and subthreshold current. Compared to junctionless single-material cylindrical surrounding-gate MOSFETs, JLDMCSG MOSFETs can effectively suppress short-channel effects and simultaneously im- prove carrier transport efficiency. It is found that the subthreshold current of JLDMCSG MOSFETs can be significantly reduced by adopting both a thin oxide and thin silicon channel. The accuracy of the analytical model is verified by its good agreement with the three-dimensional numerical simulator ISE TCAD.展开更多
An analytical model for the channel potential and the threshold voltage of the short channel dual-material-gate lightly doped drain （DMG-LDD） metal-oxide-semiconductor field-effect transistor （MOSFET） is presented...An analytical model for the channel potential and the threshold voltage of the short channel dual-material-gate lightly doped drain （DMG-LDD） metal-oxide-semiconductor field-effect transistor （MOSFET） is presented using the parabolic approximation method. The proposed model takes into account the effects of the LDD region length, the LDD region doping, the lengths of the gate materials and their respective work functions, along with all the major geometrical parameters of the MOSFET. The impact of the LDD region length, the LDD region doping, and the channel length on the channel potential is studied in detail. Furthermore, the threshold voltage of the device is calculated using the minimum middle channel potential, and the result obtained is compared with the DMG MOSFET threshold voltage to show the improvement in the threshold voltage roll-off. It is shown that the DMG-LDD MOSFET structure alleviates the problem of short channel effects （SCEs） and the drain induced barrier lowering （DIBL） more efficiently. The proposed model is verified by comparing the theoretical results with the simulated data obtained by using the commercially available ATLASTM 2D device simulator.展开更多
Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explici...Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explicit solution of two-dimensional Poisson’s equation in the depletion region. The model takes into consideration the channel length modulation effect and the contribution of the back channel current component. Its validation is verified by comparision with two dimensional device simulator MEDICI.展开更多
Sub-threshold characteristics of the dual material gate 4H-SiC MESFET （DMGFET） are investigated and the analytical models to describe the drain-induced barrier lowering （DIBL） effect are derived by solving one- an...Sub-threshold characteristics of the dual material gate 4H-SiC MESFET （DMGFET） are investigated and the analytical models to describe the drain-induced barrier lowering （DIBL） effect are derived by solving one- and two- dimensional Poisson＇s equations. Using these models, we calculate the bottom potential of the channel and the threshold voltage shift, which characterize the drain-induced barrier lowering （DIBL） effect. The calculated results reveal that the dual material gate （DMG） structure alleviates the deterioration of the threshold voltage and thus suppresses the DIBL effect due to the introduced step function, which originates from the work function difference of the two gate materials when compared with the conventional single material gate metal-semiconductor field-effect transistor （SMGFET）.展开更多
在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Drive...在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Driver,SD)芯片的面积。通过分析和实践,提出了针对用于平板电脑的Dual-Gate TFT-LCD屏和翻转方式,需要采用优化的FRC算法提高显示效果。在应用于平板电脑的dual-gate TFT-LCD屏的FRC方案中,分析了传统方案产生周期性竖线的原因,然后提出了改进方案,消除了竖线,提高了显示质量。最后,总结了FRC算法具体需要考虑的因素。展开更多
The key technologies for the dual high-k and dual metal gate, such as the electrical optimization of metal insert poly-Si stack structure, the separating of high-k and metal gate of n/pMOS in different regions of the ...The key technologies for the dual high-k and dual metal gate, such as the electrical optimization of metal insert poly-Si stack structure, the separating of high-k and metal gate of n/pMOS in different regions of the wafer, and the synchronous etching of n/pMOS gate stack, are successfully developed. First, reasonable flat-band voltage and equivalent oxide thickness of pMOS MIPS structure are obtained by further optimizing the HfSiAlON dielectric through incorporating more Al-O dipole at interface between HfSiAlON and bottom SiOx. Then, the separating of high-k and metal gate for n/pMOS is achieved by SC1（NH4OH：H2O2：H2O = 1 ： 1 ： 5） and DHF-based solution for the selective removing of n MOS TaN and Hf Si ON and by BCl3-based plasma and DHF-based solution for the selective removing of pMOS TaN/Mo and HfSiAlON.After that, the synchronous etching of n/pMOS gate stack is developed by utilizing optimized BCl3/SF6/O2/Ar plasma to obtain a vertical profile for TaN and TaN/Mo and by utilizing BCl3/Ar plasma combined with DHF-based solution to achieve high selectivity to Si substrate. Finally, good electrical characteristics of CMOS devices, obtained by utilizing these new developed technologies, further confirm that they are practicable technologies for DHDMG integration.展开更多
A dual material gate silicon-on-insulator MOSFET with asymmetrical halo is presented to improve short channel effect and carder transport efficiency for the first time. The front gate consists of two metal gates with ...A dual material gate silicon-on-insulator MOSFET with asymmetrical halo is presented to improve short channel effect and carder transport efficiency for the first time. The front gate consists of two metal gates with different work functions by making them contacting laterally, and the channel is more heavily doped near the source than in the rest. Using a three-region polynomial potential distribution and a universal boundary condition, a two-dimensional analytical model for the fully depleted silicon-on-insulator MOSFET is developed based on the explicit solution of two-dimensional Poisson＇s equation. The model includes the calculation of potential distribution along the channel and subthreshold current. The performance improvement of the novel silicon-on-insulator MOSFET is examined and compared with the traditional silicon-on-insulator MOSFET using the analytical model and two-dimensional device simulator MEDICI. It is found that the novel silicon-on-insulator MOSFET could not only suppress short channel effect, but also increase cartier transoort efficiency noticeably. The derived analytical model agrees well with MEDICI.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52177185 and 62174055)。
文摘Dual-metal gate and gate–drain underlap designs are introduced to reduce the ambipolar current of the device based on the C-shaped pocket TFET(CSP-TFET).The effects of gate work function and gate–drain underlap length on the DC characteristics and analog/RF performance of CSP-TFET devices,such as the on-state current(I_(on)),ambipolar current(I_(amb)),transconductance(g_(m)),cut-off frequency(f_(T))and gain–bandwidth product(GBP),are analyzed and compared in this work.Also,a combination of both the dual-metal gate and gate–drain underlap designs has been proposed for the C-shaped pocket dual metal underlap TFET(CSP-DMUN-TFET),which contains a C-shaped pocket area that significantly increases the on-state current of the device;this combination design substantially reduces the ambipolar current.The results show that the CSP-DMUN-TFET demonstrates an excellent performance,including high I_(on)(9.03×10^(-4)A/μm),high I_(on)/I_(off)(~10^(11)),low SS_(avg)(~13 mV/dec),and low I_(amb)(2.15×10^(-17)A/μm).The CSP-DMUN-TFET has the capability to fully suppress ambipolar currents while maintaining high on-state currents,making it a potential replacement in the next generation of semiconductor devices.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61176069)the National Key Laboratory of Analog Integrated Circuit,China (Grant No. 9140C090304110C0905)the Innovation Foundation of the State Key Laboratory of Electronic Thin Films and Integrated Devices,China (Grant No. CXJJ201004)
文摘A new high voltage trench lateral double-diffused metal–oxide semiconductor （LDMOS） with ultra-low specific onresistance （R on,sp ） is proposed. The structure features a dual gate （DG LDMOS）： a planar gate and a trench gate inset in the oxide trench. Firstly, the dual gate can provide a dual conduction channel and reduce R on,sp dramatically. Secondly, the oxide trench in the drift region modulates the electric field distribution and reduces the cell pitch but still can maintain comparable breakdown voltage （BV）. Simulation results show that the cell pitch of the DG LDMOS can be reduced by 50% in comparison with that of conventional LDMOS at the equivalent BV; furthermore, R on,sp of the DG LDMOS can be reduced by 67% due to the smaller cell pitch and the dual gate.
文摘A new planar split dual gate （PSDG） MOSFET device, its characteristics and experimental results, as well as the three dimensional device simulations, are reported here for the first time. Both theoretical calculation and 3D simulation, as well as the experiment data, show that the two independent split dual gates can provide dynamical control of the device characteristics, such as threshold voltage （Vt） and sub-threshold swing （SS）, as well as the device saturated current. The PSDG MOSFET transistor leakage current （loft） can be reduced as much as 78% of the traditional single gate MOSFET. The PSDG is fabricated and fully compatible with our conventional 0.18 μm logic process flow.
文摘In order to suppress drain-induced barrier lowering in dual material gate SOI MOSFETs,halo doping is used in the channel near the source. Two-dimensional analytical models of surface potential and threshold voltage for the novel SOI MOSFET are developed based on the explicit solution of the two-dimensional Poisson＇s equation. Its characteristic improvement is investigated. It is concluded that the novel structure exhibits better suppression of drain-induced barrier lowering and higher carrier transport efficiency than conventional dual material gate SOI MOSFETs. Its drain-induced barrier lowering decreases with increasing halo doping concentration but does not change monotonically with halo length. The analytical models agree well with the two-dimensional device simulator MEDICI.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204092 and 61076101)the Fundamental Research Funds for the Central Universities of Ministry of Education of China(Grant No.K50511250001)
文摘A two-dimensional analytical subthreshold behavior model for junctionless dual-material cylindrical surrounding- gate （JLDMCSG） metal-oxide-semiconductor field-effect transistors （MOSFETs） is proposed. It is derived by solving the two-dimensional Poisson＇s equation in two continuous cylindrical regions with any simplifying assumption. Using this analytical model, the subthreshold characteristics of JLDMCSG MOSFETs are investigated in terms of channel electro- static potential, horizontal electric field, and subthreshold current. Compared to junctionless single-material cylindrical surrounding-gate MOSFETs, JLDMCSG MOSFETs can effectively suppress short-channel effects and simultaneously im- prove carrier transport efficiency. It is found that the subthreshold current of JLDMCSG MOSFETs can be significantly reduced by adopting both a thin oxide and thin silicon channel. The accuracy of the analytical model is verified by its good agreement with the three-dimensional numerical simulator ISE TCAD.
文摘An analytical model for the channel potential and the threshold voltage of the short channel dual-material-gate lightly doped drain （DMG-LDD） metal-oxide-semiconductor field-effect transistor （MOSFET） is presented using the parabolic approximation method. The proposed model takes into account the effects of the LDD region length, the LDD region doping, the lengths of the gate materials and their respective work functions, along with all the major geometrical parameters of the MOSFET. The impact of the LDD region length, the LDD region doping, and the channel length on the channel potential is studied in detail. Furthermore, the threshold voltage of the device is calculated using the minimum middle channel potential, and the result obtained is compared with the DMG MOSFET threshold voltage to show the improvement in the threshold voltage roll-off. It is shown that the DMG-LDD MOSFET structure alleviates the problem of short channel effects （SCEs） and the drain induced barrier lowering （DIBL） more efficiently. The proposed model is verified by comparing the theoretical results with the simulated data obtained by using the commercially available ATLASTM 2D device simulator.
基金This work was supported by the National Natural Science Foundation of China (No60472003)
文摘Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explicit solution of two-dimensional Poisson’s equation in the depletion region. The model takes into consideration the channel length modulation effect and the contribution of the back channel current component. Its validation is verified by comparision with two dimensional device simulator MEDICI.
基金Project supported by the Pre-research Foundation from the National Ministries and Commissions of China (GrantNo.51308030201)
文摘Sub-threshold characteristics of the dual material gate 4H-SiC MESFET （DMGFET） are investigated and the analytical models to describe the drain-induced barrier lowering （DIBL） effect are derived by solving one- and two- dimensional Poisson＇s equations. Using these models, we calculate the bottom potential of the channel and the threshold voltage shift, which characterize the drain-induced barrier lowering （DIBL） effect. The calculated results reveal that the dual material gate （DMG） structure alleviates the deterioration of the threshold voltage and thus suppresses the DIBL effect due to the introduced step function, which originates from the work function difference of the two gate materials when compared with the conventional single material gate metal-semiconductor field-effect transistor （SMGFET）.
文摘在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Driver,SD)芯片的面积。通过分析和实践,提出了针对用于平板电脑的Dual-Gate TFT-LCD屏和翻转方式,需要采用优化的FRC算法提高显示效果。在应用于平板电脑的dual-gate TFT-LCD屏的FRC方案中,分析了传统方案产生周期性竖线的原因,然后提出了改进方案,消除了竖线,提高了显示质量。最后,总结了FRC算法具体需要考虑的因素。
基金Project supported by the National High Technology Research and Development Program of China(Grant No.2015AA010601)
文摘The key technologies for the dual high-k and dual metal gate, such as the electrical optimization of metal insert poly-Si stack structure, the separating of high-k and metal gate of n/pMOS in different regions of the wafer, and the synchronous etching of n/pMOS gate stack, are successfully developed. First, reasonable flat-band voltage and equivalent oxide thickness of pMOS MIPS structure are obtained by further optimizing the HfSiAlON dielectric through incorporating more Al-O dipole at interface between HfSiAlON and bottom SiOx. Then, the separating of high-k and metal gate for n/pMOS is achieved by SC1（NH4OH：H2O2：H2O = 1 ： 1 ： 5） and DHF-based solution for the selective removing of n MOS TaN and Hf Si ON and by BCl3-based plasma and DHF-based solution for the selective removing of pMOS TaN/Mo and HfSiAlON.After that, the synchronous etching of n/pMOS gate stack is developed by utilizing optimized BCl3/SF6/O2/Ar plasma to obtain a vertical profile for TaN and TaN/Mo and by utilizing BCl3/Ar plasma combined with DHF-based solution to achieve high selectivity to Si substrate. Finally, good electrical characteristics of CMOS devices, obtained by utilizing these new developed technologies, further confirm that they are practicable technologies for DHDMG integration.
基金Project 60472003 supported by National Natural Science Foundation of China and 2005CB321701 by the State Key Development Program for BasicResearch of China
文摘A dual material gate silicon-on-insulator MOSFET with asymmetrical halo is presented to improve short channel effect and carder transport efficiency for the first time. The front gate consists of two metal gates with different work functions by making them contacting laterally, and the channel is more heavily doped near the source than in the rest. Using a three-region polynomial potential distribution and a universal boundary condition, a two-dimensional analytical model for the fully depleted silicon-on-insulator MOSFET is developed based on the explicit solution of two-dimensional Poisson＇s equation. The model includes the calculation of potential distribution along the channel and subthreshold current. The performance improvement of the novel silicon-on-insulator MOSFET is examined and compared with the traditional silicon-on-insulator MOSFET using the analytical model and two-dimensional device simulator MEDICI. It is found that the novel silicon-on-insulator MOSFET could not only suppress short channel effect, but also increase cartier transoort efficiency noticeably. The derived analytical model agrees well with MEDICI.
