This paper studies and analyzes the response of helical stairs as helicoidal shells in earthquake zones. The response of helical stairs under gravity loads was analyzed by both the membrane theory and finite element m...This paper studies and analyzes the response of helical stairs as helicoidal shells in earthquake zones. The response of helical stairs under gravity loads was analyzed by both the membrane theory and finite element methods. The non-linear response of helical stairs, when subjected to UBC （Uniform Building Code） dynamic and static equivalent earthquake loads, were obtained using finite element models. These responses were compiled and analyzed in order to draw recommendations for the preliminary design of helical stairs in earthquake zones. The analysis of the results obtained showed that helical stairs are stiffer and lighter than regular ones.展开更多
In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are ana...In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8. 1 earthquake had greater impact on the Yunnan region,and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level,and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake,the higher ratio of the occurrence of co-seismic response,and in the same well,the larger the response amplitude,as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different. Water temperature co-seismic response almost occurred in wells with water level response,indicating that the well water level and water temperature are closely related in co-seismic response,and the well water temperature seismic response was caused mainly by well water level seismic response.展开更多
Output-only structural identification is developed by a refined Frequency Domain Decomposition（rFDD） approach, towards assessing current modal properties of heavy-damped buildings（in terms of identification challe...Output-only structural identification is developed by a refined Frequency Domain Decomposition（rFDD） approach, towards assessing current modal properties of heavy-damped buildings（in terms of identification challenge）, under strong ground motions. Structural responses from earthquake excitations are taken as input signals for the identification algorithm. A new dedicated computational procedure, based on coupled Chebyshev Type Ⅱ bandpass filters, is outlined for the effective estimation of natural frequencies, mode shapes and modal damping ratios. The identification technique is also coupled with a Gabor Wavelet Transform, resulting in an effective and self-contained time-frequency analysis framework. Simulated response signals generated by shear-type frames（with variable structural features） are used as a necessary validation condition. In this context use is made of a complete set of seismic records taken from the FEMA P695 database, i.e. all 44 ＂Far-Field＂（22 NS, 22 WE） earthquake signals. The modal estimates are statistically compared to their target values, proving the accuracy of the developed algorithm in providing prompt and accurate estimates of all current strong ground motion modal parameters. At this stage, such analysis tool may be employed for convenient application in the realm of Earthquake Engineering, towards potential Structural Health Monitoring and damage detection purposes.展开更多
In this paper, the dynamical response of soil structure coupled system was studied by the continuum theory of soild fluid mixtures, the building foundation system subjected to rapid earthquake excitation were calcul...In this paper, the dynamical response of soil structure coupled system was studied by the continuum theory of soild fluid mixtures, the building foundation system subjected to rapid earthquake excitation were calculated by using finite element method.In the results, the deformation patterns and corresponding contour diagrams of pore pressure at various time levels are given, time variations of displacement in a certain node and shear stress in a certain element are also presented. The results of this study have provided an improved understanding of coupled behaviour of porous media. The procedure developed in this paper can be effectively used under a wide range of loading conditions from very slow quasi static to very rapid earthquake excitations.展开更多
The dynamic and earthquake response of bell towers,located at the Island of Kefalonia,Greece,is examined here.These structures were subjected during the winter of 2014 with an intensive earthquake sequence.The dynamic...The dynamic and earthquake response of bell towers,located at the Island of Kefalonia,Greece,is examined here.These structures were subjected during the winter of 2014 with an intensive earthquake sequence.The dynamic characteristics of two bell towers were measured in situ.Subsequently the dynamic and earthquake response of each bell tower was numerically simulated employing 3-D dynamic elastic numerical simulations taking into account the soil-foundation deformability.It is demonstrated that the soil-foundation-structure interaction influences the dynamic and earthquake response predictions for this structure quite significantly.It also demonstrates the usefulness of such in-situ testing towards formulating realistic numerical models in order to yield realistic predictions of the dynamic and earthquake response of the examined structures.The obtained numerical analyses utilize the earthquake ground motion which was recorded at close distance from both bell towers.The numerical predictions of the earthquake response of both bell towers are utilized to draw conclusions of their actual earthquake performance.It is concluded that the soil-foundation interaction was a critical response mechanism.The newly built RC(reinforced concrete)bell towers performed satisfactorily.展开更多
Several procedures for non-linear static and dynamic analysis of structures have been developed in recent years. In this paper, the response spectrum analysis is performed on two different shapes i.e. regular and irre...Several procedures for non-linear static and dynamic analysis of structures have been developed in recent years. In this paper, the response spectrum analysis is performed on two different shapes i.e. regular and irregular shape of structure by using STAAD PRO. And the comparison results are studied and compared accounting for the earthquake characteristics and the structure dynamic characteristics. As the results show that the earthquake response peak values and the main response frequencies are very close and comparable. It can be referred to by the engineering applications.展开更多
Four results of the rupture process of 14 April 2010 Yushu, Qinghai, earthquake, obtained by inverting the broadband seismic data of Global Seismographic Network （GSN） based on the inversion method of earthquake rup...Four results of the rupture process of 14 April 2010 Yushu, Qinghai, earthquake, obtained by inverting the broadband seismic data of Global Seismographic Network （GSN） based on the inversion method of earthquake rupture process, were compared and discussed. It is found that the Yushu earthquake has several basic characteristics as follows： 1 There exist two principal sub-events which correspond to two slip-concentrated patches being located near the hypocenter and to the southeast of the epicenter. The rupture of the slip-concentrated patch to the southeast of the epicenter broke though the ground surface; 2 The peak slip and peak slip-rate are about 2.1 m and 1.1 m/s, respectively, indicating that the Yushu earthquake is an event with large slip-rate on the fault plane; 3 Overall the Yushu earthquake is a unilateral rupture event with the rupture mainly propagating southeastward. The strong focusing of the seismic energy in the southeast of the epicenter due to the ＂seismic Doppler effect＂ reasonably accounts for the tremendous damage in the Yushu city.展开更多
The Kunlunshan Mountain Ms8.1 earthquake, occurred in Nov.14, 2001, is the first event with magnitude more than 8 in the China earthquake monitoring history, specifically at the beginning of digital techniques in prec...The Kunlunshan Mountain Ms8.1 earthquake, occurred in Nov.14, 2001, is the first event with magnitude more than 8 in the China earthquake monitoring history, specifically at the beginning of digital techniques in precursor monitoring networks. Any investigation of recorded data on this earthquake is very important for testing the operation of the digital monitoring networks and understanding the preparation, occurrence, and adjustment of stress/strain of strong continental earthquakes. In this paper we investigated the coseismic response changes of well water level of groundwater and volume strain meter of bore hole in digital earthquake monitoring network of Capital area and its vicinity, due to the Nov.14, 2001 Ms8.1 Kunlun Mountain earthquake. The responding time, shapes or manners, amplitudes, and lasting time of well water level and strain-meters to seismic wave are studied in comparison. Then we discussed the possibility that the response changes of groundwater to strong distant earthquakes can be understood as one kind of observing evidence of stress/strain changes induced by distant earthquake.展开更多
The fast processing, seismic damage data extraction and loss evaluation from RS imagery acquired immediately after a destructive earthquake occurs, are important means for compen- sating the insufficiency of seismic d...The fast processing, seismic damage data extraction and loss evaluation from RS imagery acquired immediately after a destructive earthquake occurs, are important means for compen- sating the insufficiency of seismic damage information from ground-based investigations and provide an important basis for emergency command and rescue. The paper introduces the method of emergency seismic damage assessment using remote sensing data and its application to the great Wenchuan earthquake of magnitude 8.0 occurring in southwest Sichuan Province on May 12, 2008. The practical effectiveness of the method is also evaluated in the paper.展开更多
In this study, we analyze the co-seismic response of water levels in the Jiaji well to strong earthquakes （Ms ≥7. 8） from 2001 to 2010 at an epicentrai distance less than 8000km. We investigated the co-seismic vari...In this study, we analyze the co-seismic response of water levels in the Jiaji well to strong earthquakes （Ms ≥7. 8） from 2001 to 2010 at an epicentrai distance less than 8000km. We investigated the co-seismic variation form of water levels, and analyzed the relationship between the amplitude of water level variation and the magnitude and the epicentral distance. We then checked the seismic wave phases when the changes of water level occurred. It was shown that： （1） the water level＇s co-seismic response is mainly characterized by escalation with no oscillation; （2） the amplitude of water level change has a certain connection with epicentral distance and magnitude; （3） co-seismic response of water levels in the Jiaji well shows a certain directivity; （4） most of the co-seismic responses were caused by surface waves, and some by long-period S waves.展开更多
This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certai...This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.展开更多
The vehicle-track-bridge(VTB)element was used to investigate how a high-speed railway bridge reacted when it was subjected to near-fault directivity pulse-like ground motions.Based on the PEER NAG Strong Ground Motion...The vehicle-track-bridge(VTB)element was used to investigate how a high-speed railway bridge reacted when it was subjected to near-fault directivity pulse-like ground motions.Based on the PEER NAG Strong Ground Motion Database,the spatial analysis model of a vehicle-bridge system was developed,the VTB element was derived to simulate the interaction of train and bridge,and the elasto-plastic seismic responses of the bridge were calculated.The calculation results show that girder and pier top displacement,and bending moment of the pier base increase subjected to near-fault directivity pulse-like ground motion compared to far-field earthquakes,and the greater deformation responses in near-fault shaking are associated with fewer reversed cycles of loading.The hysteretic characteristics of the pier subjected to a near-fault directivity pulse-like earthquake should be explicitly expressed as the bending moment-rotation relationship of the pier base,which is characterized by the centrally strengthened hysteretic cycles at some point of the loading time-history curve.The results show that there is an amplification of the vertical deflection in the girder's mid-span owing to the high vertical ground motion.In light of these findings,the effect of the vertical ground motion should be used to adjust the unconservative amplification constant 2/3 of the vertical-to-horizontal peak ground motion ratio in the seismic design of bridge.展开更多
The results of a study on the key technology of using shell sand, a kind of sea sand, as backfill for sea reclamation are described briefly. Iaboratory tests show that the physical and mechanical properties of shell s...The results of a study on the key technology of using shell sand, a kind of sea sand, as backfill for sea reclamation are described briefly. Iaboratory tests show that the physical and mechanical properties of shell sand are as good as normal quartz sand. Based on the chemical test and durability test of shell sand it could be concluded that the influence of corrosion of shell sand by acid rain and sea water might be ignored in the evaluation of the safety and durability of the engineering project. The results of field improvement tests show that the bearing capacity of shell sand backfill foundation is more than 200 kPa after vibmflotation improvement or dynamic compaction improvement. The shell sand is a good backfill material for sea reclamation.展开更多
The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control s...The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control shear force for different structures were derived with the stiffness ratio of columns taken into consideration.With the active control algorithm based on the theory of modern optimal control,this study proposes a simulative computation on the frame structure and mill structure respectively,and the results indicate that the installation of this smart controller with proper parameters can significantly reduce seismic responses of different structures. The optimal parameters of the damper can be identified through a parameter study.展开更多
A feedback control optimization method of partially observable linear structures via stationary response is proposed and analyzed with linear building structures equipped with control devices and sensors. First, the p...A feedback control optimization method of partially observable linear structures via stationary response is proposed and analyzed with linear building structures equipped with control devices and sensors. First, the partially observable control problem of the structure under horizontal ground acceleration excitation is converted into a completely observable control problem. Then the It6 stochastic differential equations of the system are derived based on the stochastic averaging method for quasi-integrable Hamiltonian systems and the stationary solution to the Fokker-Plank-Kolmogorov （FPK） equation associated with the It6 equations is obtained. The performance index in terms of the mean system energy and mean square control force is established and the optimal control force is obtained by minimizing the performance index. Finally, the numerical results for a three-story building structure model under E1 Centro, Hachinohe, Northridge and Kobe earthquake excitations are given to illustrate the application and the effectiveness of the proposed method.展开更多
Soil dynamic parameters,including dynamic shear modulus ratio and damping ratio,have important effects on the results of layered soil earthquake response. In this paper,the mean parameter values of silty clay in diffe...Soil dynamic parameters,including dynamic shear modulus ratio and damping ratio,have important effects on the results of layered soil earthquake response. In this paper,the mean parameter values of silty clay in different depths are obtained after statistical analysis of the experimental soil dynamic data from 20 recent site seismic safety evaluation reports in the Beijing area. Furthermore,based on two typical engineering sites,the influence of four different soil dynamic parameters,the statistic mean values,experimental values, values recommended by Yuan Xiaoming,and the values recommended in the code for seismic safety evaluation of engineering sites( DB001-94) are analyzed. The result shows that mean statistical values are applicable to seismic safety evaluation work in the Beijing area,especially for some inter-layered silty clays whose undisturbed soil samples are hard to obtain.展开更多
In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algor...In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude（MI） could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.展开更多
This paper presents the application of finite state machine (FSM) theory to the programming of nonlinear hysteretic model simulation for both known and newly created rules. The complicated reversed internal paths invo...This paper presents the application of finite state machine (FSM) theory to the programming of nonlinear hysteretic model simulation for both known and newly created rules. The complicated reversed internal paths involved in the nonlinear relationship which not only depend on material properties, but also on load history, often confuse rule creators and scholars. In this paper, we first describe the development of past hysteretic models. Then we introduce the FSM theory conceptually, and explain how it is applied to reversed and diverse routes. Next, state definitions and procedures are explained with a specific data example using the bilinear model. Finally, the successful application to UC-win/FRAME (3D) is described and several characteristics are summarized. By using FSM’s states and the linkages to represent a hysteresis model, we can quickly realize the programming of the defined complex model rules, and the nonlinear modeling becomes more efficient and feasible.展开更多
A three-dimensional model of near-surface shear-wave velocity in the deep alluvial basin underlying the metropolitan area of Las Vegas, Nevada （USA）, is being developed for earthquake site response projections. The ...A three-dimensional model of near-surface shear-wave velocity in the deep alluvial basin underlying the metropolitan area of Las Vegas, Nevada （USA）, is being developed for earthquake site response projections. The velocity dataset, which includes 230 measurements, is interpolated across the model using depth-dependent correlations of velocity with sediment type. The sediment-type database contains more than 1 400 well and borehole logs. Sediment sequences reported in logs are assigned to one of four units. A characteristic shear-wave velocity profile is developed for each unit by analyzing closely spaced pairs of velocity profiles and well or borehole logs. The resulting velocity model exhibits reasonable values and patterns, although it does not explicitly honor the measured shear-wave velocity profiles. Site response investigations that applied a preliminary version of the velocity model support a two-zone ground-shaking hazard model for the valley. Areas in which clay predominates in the upper 30 m are predicted to have stronger ground motions than the rest of the basin.展开更多
文摘This paper studies and analyzes the response of helical stairs as helicoidal shells in earthquake zones. The response of helical stairs under gravity loads was analyzed by both the membrane theory and finite element methods. The non-linear response of helical stairs, when subjected to UBC （Uniform Building Code） dynamic and static equivalent earthquake loads, were obtained using finite element models. These responses were compiled and analyzed in order to draw recommendations for the preliminary design of helical stairs in earthquake zones. The analysis of the results obtained showed that helical stairs are stiffer and lighter than regular ones.
基金sponsored by the special fund of“A Study on Short-term Seismic Tracking of Strong Earthquakes in the Yunnan Area”of the“Ten Key Projects”in Yunnan Provincethe 2016 Earthquake Trend Tracking Task of China Earthquake Administration(2016010305)the 2015 Earthquake Trend Tracking Task of Earthquake Administration of Yunnan Province
文摘In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8. 1 earthquake had greater impact on the Yunnan region,and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level,and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake,the higher ratio of the occurrence of co-seismic response,and in the same well,the larger the response amplitude,as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different. Water temperature co-seismic response almost occurred in wells with water level response,indicating that the well water level and water temperature are closely related in co-seismic response,and the well water temperature seismic response was caused mainly by well water level seismic response.
基金Public research funding from“Fondi di Ricerca d’Ateneo ex 60%” and a ministerial doctoral grantfunds at the ISA Doctoral School,University of Bergamo,Department of Engineering and Applied Sciences (Dalmine)
文摘Output-only structural identification is developed by a refined Frequency Domain Decomposition（rFDD） approach, towards assessing current modal properties of heavy-damped buildings（in terms of identification challenge）, under strong ground motions. Structural responses from earthquake excitations are taken as input signals for the identification algorithm. A new dedicated computational procedure, based on coupled Chebyshev Type Ⅱ bandpass filters, is outlined for the effective estimation of natural frequencies, mode shapes and modal damping ratios. The identification technique is also coupled with a Gabor Wavelet Transform, resulting in an effective and self-contained time-frequency analysis framework. Simulated response signals generated by shear-type frames（with variable structural features） are used as a necessary validation condition. In this context use is made of a complete set of seismic records taken from the FEMA P695 database, i.e. all 44 ＂Far-Field＂（22 NS, 22 WE） earthquake signals. The modal estimates are statistically compared to their target values, proving the accuracy of the developed algorithm in providing prompt and accurate estimates of all current strong ground motion modal parameters. At this stage, such analysis tool may be employed for convenient application in the realm of Earthquake Engineering, towards potential Structural Health Monitoring and damage detection purposes.
文摘In this paper, the dynamical response of soil structure coupled system was studied by the continuum theory of soild fluid mixtures, the building foundation system subjected to rapid earthquake excitation were calculated by using finite element method.In the results, the deformation patterns and corresponding contour diagrams of pore pressure at various time levels are given, time variations of displacement in a certain node and shear stress in a certain element are also presented. The results of this study have provided an improved understanding of coupled behaviour of porous media. The procedure developed in this paper can be effectively used under a wide range of loading conditions from very slow quasi static to very rapid earthquake excitations.
文摘The dynamic and earthquake response of bell towers,located at the Island of Kefalonia,Greece,is examined here.These structures were subjected during the winter of 2014 with an intensive earthquake sequence.The dynamic characteristics of two bell towers were measured in situ.Subsequently the dynamic and earthquake response of each bell tower was numerically simulated employing 3-D dynamic elastic numerical simulations taking into account the soil-foundation deformability.It is demonstrated that the soil-foundation-structure interaction influences the dynamic and earthquake response predictions for this structure quite significantly.It also demonstrates the usefulness of such in-situ testing towards formulating realistic numerical models in order to yield realistic predictions of the dynamic and earthquake response of the examined structures.The obtained numerical analyses utilize the earthquake ground motion which was recorded at close distance from both bell towers.The numerical predictions of the earthquake response of both bell towers are utilized to draw conclusions of their actual earthquake performance.It is concluded that the soil-foundation interaction was a critical response mechanism.The newly built RC(reinforced concrete)bell towers performed satisfactorily.
文摘Several procedures for non-linear static and dynamic analysis of structures have been developed in recent years. In this paper, the response spectrum analysis is performed on two different shapes i.e. regular and irregular shape of structure by using STAAD PRO. And the comparison results are studied and compared accounting for the earthquake characteristics and the structure dynamic characteristics. As the results show that the earthquake response peak values and the main response frequencies are very close and comparable. It can be referred to by the engineering applications.
基金supported by China Postdoctoral Science Foundation funded project (20080440435)the project (DQJB09B06) from Institute of Geophysics (IGP),China Earthquake Administration (CEA). Contribution No. is 10FE3002, IGP-CEA
文摘Four results of the rupture process of 14 April 2010 Yushu, Qinghai, earthquake, obtained by inverting the broadband seismic data of Global Seismographic Network （GSN） based on the inversion method of earthquake rupture process, were compared and discussed. It is found that the Yushu earthquake has several basic characteristics as follows： 1 There exist two principal sub-events which correspond to two slip-concentrated patches being located near the hypocenter and to the southeast of the epicenter. The rupture of the slip-concentrated patch to the southeast of the epicenter broke though the ground surface; 2 The peak slip and peak slip-rate are about 2.1 m and 1.1 m/s, respectively, indicating that the Yushu earthquake is an event with large slip-rate on the fault plane; 3 Overall the Yushu earthquake is a unilateral rupture event with the rupture mainly propagating southeastward. The strong focusing of the seismic energy in the southeast of the epicenter due to the ＂seismic Doppler effect＂ reasonably accounts for the tremendous damage in the Yushu city.
基金supported by Natural Science Foundation of China(41274061 and 40374019)
文摘The Kunlunshan Mountain Ms8.1 earthquake, occurred in Nov.14, 2001, is the first event with magnitude more than 8 in the China earthquake monitoring history, specifically at the beginning of digital techniques in precursor monitoring networks. Any investigation of recorded data on this earthquake is very important for testing the operation of the digital monitoring networks and understanding the preparation, occurrence, and adjustment of stress/strain of strong continental earthquakes. In this paper we investigated the coseismic response changes of well water level of groundwater and volume strain meter of bore hole in digital earthquake monitoring network of Capital area and its vicinity, due to the Nov.14, 2001 Ms8.1 Kunlun Mountain earthquake. The responding time, shapes or manners, amplitudes, and lasting time of well water level and strain-meters to seismic wave are studied in comparison. Then we discussed the possibility that the response changes of groundwater to strong distant earthquakes can be understood as one kind of observing evidence of stress/strain changes induced by distant earthquake.
基金sponsored by the National Science and Technological Support Program of the 11th "Five-year Plan"(2006BAC01B02-01-01)
文摘The fast processing, seismic damage data extraction and loss evaluation from RS imagery acquired immediately after a destructive earthquake occurs, are important means for compen- sating the insufficiency of seismic damage information from ground-based investigations and provide an important basis for emergency command and rescue. The paper introduces the method of emergency seismic damage assessment using remote sensing data and its application to the great Wenchuan earthquake of magnitude 8.0 occurring in southwest Sichuan Province on May 12, 2008. The practical effectiveness of the method is also evaluated in the paper.
基金supported by the 2011 "China Spark Program"of China Earthquake Administration(XH1020)
文摘In this study, we analyze the co-seismic response of water levels in the Jiaji well to strong earthquakes （Ms ≥7. 8） from 2001 to 2010 at an epicentrai distance less than 8000km. We investigated the co-seismic variation form of water levels, and analyzed the relationship between the amplitude of water level variation and the magnitude and the epicentral distance. We then checked the seismic wave phases when the changes of water level occurred. It was shown that： （1） the water level＇s co-seismic response is mainly characterized by escalation with no oscillation; （2） the amplitude of water level change has a certain connection with epicentral distance and magnitude; （3） co-seismic response of water levels in the Jiaji well shows a certain directivity; （4） most of the co-seismic responses were caused by surface waves, and some by long-period S waves.
文摘This paper studies the evolution charateristics of positive and negative quakes before Hyugo earthquake of M =7.2 and several strong quakes in Kanto area in Japan.The results show that the earthquakes over a certain megnitude are mainly positive ones a certain time before the main shock in or near the focal regions of most strong quakes,and form a concentratingintervals of positive quakes,The main quakes generally locate in or near the areas of positive quake distribution.Negative quakes often occur several months before the main shocks (not excluding positive ones), with the decrease of LURR (Loading/Unloading Response Ratio) values.It possibly shows that earthquake generating process has come to a short term stage.These characteristics may help to predict the time and location of the future earthquakes,and have been applied to the preliminary prediction of the time and the location of the earthquake of M =6.6 on Sep.11,1996 in Kanto area.
基金Project(2013CB036203)supported by the National Basic Research Program of ChinaProject(2013M530022)supported by China Postdoctoral Science Foundation+4 种基金Project(2013-K5-31)supported by Science and Technology Plan of Ministry of Housing and Urban-Rural Development of ChinaProject supported by High-level Scientific Research Foundation for the Introduction of Talent of Yangzhou University,ChinaProject supported by the Open Fund of the National Engineering Laboratory for High Speed Railway Construction,ChinaProject(IRT1296)supported by the Program for Changjiang Scholars and Innovative Research Team in University,ChinaProject(50908236)supported by the National Natural Science Foundation of China
文摘The vehicle-track-bridge(VTB)element was used to investigate how a high-speed railway bridge reacted when it was subjected to near-fault directivity pulse-like ground motions.Based on the PEER NAG Strong Ground Motion Database,the spatial analysis model of a vehicle-bridge system was developed,the VTB element was derived to simulate the interaction of train and bridge,and the elasto-plastic seismic responses of the bridge were calculated.The calculation results show that girder and pier top displacement,and bending moment of the pier base increase subjected to near-fault directivity pulse-like ground motion compared to far-field earthquakes,and the greater deformation responses in near-fault shaking are associated with fewer reversed cycles of loading.The hysteretic characteristics of the pier subjected to a near-fault directivity pulse-like earthquake should be explicitly expressed as the bending moment-rotation relationship of the pier base,which is characterized by the centrally strengthened hysteretic cycles at some point of the loading time-history curve.The results show that there is an amplification of the vertical deflection in the girder's mid-span owing to the high vertical ground motion.In light of these findings,the effect of the vertical ground motion should be used to adjust the unconservative amplification constant 2/3 of the vertical-to-horizontal peak ground motion ratio in the seismic design of bridge.
基金This work was financially supported by CNOOC(Grant No.Z2004SLFJ-TS26)
文摘The results of a study on the key technology of using shell sand, a kind of sea sand, as backfill for sea reclamation are described briefly. Iaboratory tests show that the physical and mechanical properties of shell sand are as good as normal quartz sand. Based on the chemical test and durability test of shell sand it could be concluded that the influence of corrosion of shell sand by acid rain and sea water might be ignored in the evaluation of the safety and durability of the engineering project. The results of field improvement tests show that the bearing capacity of shell sand backfill foundation is more than 200 kPa after vibmflotation improvement or dynamic compaction improvement. The shell sand is a good backfill material for sea reclamation.
基金FundedbytheNationalNaturalScienceFoundationofChi na (No .5 0 0 380 1 0 )
文摘The control using piezoelectric smart moment (PSM) controllers for seismically excited structures was studied.The radical principle of PSM controller was introduced firstly and then the different formulae of control shear force for different structures were derived with the stiffness ratio of columns taken into consideration.With the active control algorithm based on the theory of modern optimal control,this study proposes a simulative computation on the frame structure and mill structure respectively,and the results indicate that the installation of this smart controller with proper parameters can significantly reduce seismic responses of different structures. The optimal parameters of the damper can be identified through a parameter study.
基金Project supported by the National Natural Science Foundation of China under a key grant (No.10332030)the Research Fund for the Doctoral Program of Higher Education of China (No.20060335125)the Zhejiang Provincial Natural Science Foundation of China (No.Y607087).
文摘A feedback control optimization method of partially observable linear structures via stationary response is proposed and analyzed with linear building structures equipped with control devices and sensors. First, the partially observable control problem of the structure under horizontal ground acceleration excitation is converted into a completely observable control problem. Then the It6 stochastic differential equations of the system are derived based on the stochastic averaging method for quasi-integrable Hamiltonian systems and the stationary solution to the Fokker-Plank-Kolmogorov （FPK） equation associated with the It6 equations is obtained. The performance index in terms of the mean system energy and mean square control force is established and the optimal control force is obtained by minimizing the performance index. Finally, the numerical results for a three-story building structure model under E1 Centro, Hachinohe, Northridge and Kobe earthquake excitations are given to illustrate the application and the effectiveness of the proposed method.
基金sponsored jointly by the Research Grants from Institute of Crustal Dynamics,CEA(NO. ZDJ2007-7)the 2007 Special Research Project 8-50 of the Department of Finance
文摘Soil dynamic parameters,including dynamic shear modulus ratio and damping ratio,have important effects on the results of layered soil earthquake response. In this paper,the mean parameter values of silty clay in different depths are obtained after statistical analysis of the experimental soil dynamic data from 20 recent site seismic safety evaluation reports in the Beijing area. Furthermore,based on two typical engineering sites,the influence of four different soil dynamic parameters,the statistic mean values,experimental values, values recommended by Yuan Xiaoming,and the values recommended in the code for seismic safety evaluation of engineering sites( DB001-94) are analyzed. The result shows that mean statistical values are applicable to seismic safety evaluation work in the Beijing area,especially for some inter-layered silty clays whose undisturbed soil samples are hard to obtain.
文摘In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude（MI） could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.
文摘This paper presents the application of finite state machine (FSM) theory to the programming of nonlinear hysteretic model simulation for both known and newly created rules. The complicated reversed internal paths involved in the nonlinear relationship which not only depend on material properties, but also on load history, often confuse rule creators and scholars. In this paper, we first describe the development of past hysteretic models. Then we introduce the FSM theory conceptually, and explain how it is applied to reversed and diverse routes. Next, state definitions and procedures are explained with a specific data example using the bilinear model. Finally, the successful application to UC-win/FRAME (3D) is described and several characteristics are summarized. By using FSM’s states and the linkages to represent a hysteresis model, we can quickly realize the programming of the defined complex model rules, and the nonlinear modeling becomes more efficient and feasible.
基金supported by the U.S. Department of Energy(Contract No. DE-FG52-03NA99204)
文摘A three-dimensional model of near-surface shear-wave velocity in the deep alluvial basin underlying the metropolitan area of Las Vegas, Nevada （USA）, is being developed for earthquake site response projections. The velocity dataset, which includes 230 measurements, is interpolated across the model using depth-dependent correlations of velocity with sediment type. The sediment-type database contains more than 1 400 well and borehole logs. Sediment sequences reported in logs are assigned to one of four units. A characteristic shear-wave velocity profile is developed for each unit by analyzing closely spaced pairs of velocity profiles and well or borehole logs. The resulting velocity model exhibits reasonable values and patterns, although it does not explicitly honor the measured shear-wave velocity profiles. Site response investigations that applied a preliminary version of the velocity model support a two-zone ground-shaking hazard model for the valley. Areas in which clay predominates in the upper 30 m are predicted to have stronger ground motions than the rest of the basin.
