The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C ...The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C to 400°C was investigated. The microstructure evolution during the aging treatment was characterized by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results show that the plate-like bainite precipitates distribute homogeneously within austenitic grains and at grain boundaries. The volume fraction of bainite increases with the increase in aging temperature and aging time, which substantially improves the martensitic transformation critical stress of the alloy, whereas the bainite only slightly affects the superelasticity. This behavior is attributed to a coherent relationship between the bainite and the austenite, as well as to the bainite and the martensite exhibiting the same crystal structure. The variations of the martensitic transformation critical stress and the superelasticity of columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with aging-temperature and aging time are described by the Austin-Rickett equation, where the activation energy of bainite precipitation is 77.2 kJ ·mol1. Finally, a columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with both excellent superelasticity（5%-9%） and high martensitic transformation critical stress（443-677 MPa） is obtained through the application of the appropriate aging treatments.展开更多
Precipitation reactions in the differential scanning calorimetry （DSC） of an Al-Cu-Mg-Ag alloy were identified by analyzing the results from hardness test,electrical conductivity test,and transmission electron micro...Precipitation reactions in the differential scanning calorimetry （DSC） of an Al-Cu-Mg-Ag alloy were identified by analyzing the results from hardness test,electrical conductivity test,and transmission electron microscope （TEM） examination.It is discovered that thermal effects can be identified through selected area electron diffraction and bright-field images.The reaction peaks around 171,231,and 276℃ can be attributed to a structural rearrangement of coherent zones,to the precipitation of Ω phases,and to the precipitation of Ω and θ＇ and possible combination with the transition of θ＇→θ,respectively.In addition,the hardness and electrical conductivity of the alloy change proportionately with the progression of reactions during the heating process.This phenomenon can be attributed to the evolution of the micro-structure.展开更多
In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transfo...In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transformation. The microstructures and superelasticity behavior of the fibers were studied via scanning electron microscopy（SEM） and a dynamic mechanical analyzer（DMA）, respectively. Appropriate heat treatment further improves the plasticity of Cu-based alloys. The serration behavior observed during the loading process is due to the multiple martensite phase transformation.展开更多
A variety of unique Al(salen) complexes functionalized by imidazolium-based ionic liquid(IL) moieties with the salen ligand at the two sides of 3,3′-position have been successfully prepared, rather than familiar 5,5...A variety of unique Al(salen) complexes functionalized by imidazolium-based ionic liquid(IL) moieties with the salen ligand at the two sides of 3,3′-position have been successfully prepared, rather than familiar 5,5′-position reported previously.The catalytic activity obtained by these bifunctional catalysts could be superior to those of the binary type catalysts in the formation of five-membered heterocyclic compounds from the cycloaddition reaction of CO_2 and three-membered heterocyclic compounds(including terminal epoxides and N-substituted aziridines), presumably due to the distinguished intramolecularly synergistic catalysis, which might lead to perform the cycloaddition reaction at ambient conditions and retain excellent yield and unprecedented chemo-or regioselectivity. Moreover, the polyether-based trifunctional Al(salen) catalysts with the best catalytic performance could be regenerated and reused at least eight times without any obvious decreases in catalytic activity. Finally,the kinetic investigation suggested the structure of catalysts had important influences on the catalytic activity, thereby proposing the possible reaction mechanism.展开更多
Impact and torsion pendulums are applied in impulse coupling experiments of high-energy laser irradiation of space debris. It is difficult to achieve a multi-pulse experiment and thus hard to analyze the multi-pulse i...Impact and torsion pendulums are applied in impulse coupling experiments of high-energy laser irradiation of space debris. It is difficult to achieve a multi-pulse experiment and thus hard to analyze the multi-pulse impulse coupling effect. Here, we designed a new recoil impulse experimental measurement system of non-contact, multidegrees of freedom, and multi-pulse irradiation. The system used a low-pressure and low-temperature vacuum chamber to simulate the space environment, the pinning effect of magnetic levitation to achieve aluminum target suspension, and high-speed cameras to record the displacement over time to calculate the impulse of the target.Then the impulse coupling experiment of multi-pulse laser irradiation on the aluminum target was performed.The result shows that the multi-pulse impulse coupling effect is not the linear accumulation of coupling results by every single-pulse and multi-pulse coefficient that decreases with the increase of the number of pulses, and eventually stabilizes as the decrease gets smaller.展开更多
Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal...Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal by co-precipitation with alum（Al_2（SO_4）_3·18H_2O）.Aluminum sulfate was more efficient than the other coagulants for fluoride removal in the pH range between 6 and 8.Nano-crystalline TiO_2 was more effective for fluoride removal than Al and Fe hydroxides in a pH range of 3–5.Coexisting anions in water decreased the removal of fluoride in the order：phosphate（2.5 mg/L） 〉 arsenate（0.1 mg/L） 〉 bicarbonate（200 mg/L） 〉sulfate（100 mg/L） = nitrate（100 mg/L） 〉 silicate（10 mg/L） at a pH of 6.0.The effect of silicate became more significant at pH 〉 7.0.Calcium and magnesium improved the removal of fluoride.Zeta-potential measurements determined that the adsorption of fluoride shifted the PZC of Al（OH）_3 precipitates from 8.9 to 8.4,indicating the chemical adsorption of fluoride at the surface.The presence of fluoride in solution significantly increased the soluble aluminum concentration at pH 〈 6.5.A Visual MINTEQ modeling study indicated that the increased aluminum solubility was caused by the formation of AlF^（2＋）,AlF^（＋2）,and AlF_3complexes.The AlF_x complexes decreased the removal of fluoride during co-precipitation with aluminum sulfate.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 51574027 and 51604206)the Financial Support from the State Key Laboratory for Advanced Metals and Materials (No. 2016Z-22)
文摘The effect of aging treatment on the superelasticity and martensitic transformation critical stress in columnar-grained Cu_（71）Al_（18）Mn_（11） shape memory alloy（SMA） at the temperature ranging from 250°C to 400°C was investigated. The microstructure evolution during the aging treatment was characterized by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results show that the plate-like bainite precipitates distribute homogeneously within austenitic grains and at grain boundaries. The volume fraction of bainite increases with the increase in aging temperature and aging time, which substantially improves the martensitic transformation critical stress of the alloy, whereas the bainite only slightly affects the superelasticity. This behavior is attributed to a coherent relationship between the bainite and the austenite, as well as to the bainite and the martensite exhibiting the same crystal structure. The variations of the martensitic transformation critical stress and the superelasticity of columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with aging-temperature and aging time are described by the Austin-Rickett equation, where the activation energy of bainite precipitation is 77.2 kJ ·mol1. Finally, a columnar-grained Cu_（71）Al_（18）Mn_（11） SMA with both excellent superelasticity（5%-9%） and high martensitic transformation critical stress（443-677 MPa） is obtained through the application of the appropriate aging treatments.
文摘Precipitation reactions in the differential scanning calorimetry （DSC） of an Al-Cu-Mg-Ag alloy were identified by analyzing the results from hardness test,electrical conductivity test,and transmission electron microscope （TEM） examination.It is discovered that thermal effects can be identified through selected area electron diffraction and bright-field images.The reaction peaks around 171,231,and 276℃ can be attributed to a structural rearrangement of coherent zones,to the precipitation of Ω phases,and to the precipitation of Ω and θ＇ and possible combination with the transition of θ＇→θ,respectively.In addition,the hardness and electrical conductivity of the alloy change proportionately with the progression of reactions during the heating process.This phenomenon can be attributed to the evolution of the micro-structure.
基金financial support of the National High Technology Research and Development Program of China (No. 2009AA03Z113)the National Science Foundation of China (No. 51471025)
文摘In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transformation. The microstructures and superelasticity behavior of the fibers were studied via scanning electron microscopy（SEM） and a dynamic mechanical analyzer（DMA）, respectively. Appropriate heat treatment further improves the plasticity of Cu-based alloys. The serration behavior observed during the loading process is due to the multiple martensite phase transformation.
基金supported by the National Science for Distinguished Young Scholars of China(21425627)the National Natural Science Foundation of China(21676306)+1 种基金the Natural Science Foundation of Guangdong Province(2016A030310211,2015A030313104)the Fundamental Research Funds for the Central Universities of Sun Yat-sen University
文摘A variety of unique Al(salen) complexes functionalized by imidazolium-based ionic liquid(IL) moieties with the salen ligand at the two sides of 3,3′-position have been successfully prepared, rather than familiar 5,5′-position reported previously.The catalytic activity obtained by these bifunctional catalysts could be superior to those of the binary type catalysts in the formation of five-membered heterocyclic compounds from the cycloaddition reaction of CO_2 and three-membered heterocyclic compounds(including terminal epoxides and N-substituted aziridines), presumably due to the distinguished intramolecularly synergistic catalysis, which might lead to perform the cycloaddition reaction at ambient conditions and retain excellent yield and unprecedented chemo-or regioselectivity. Moreover, the polyether-based trifunctional Al(salen) catalysts with the best catalytic performance could be regenerated and reused at least eight times without any obvious decreases in catalytic activity. Finally,the kinetic investigation suggested the structure of catalysts had important influences on the catalytic activity, thereby proposing the possible reaction mechanism.
文摘Impact and torsion pendulums are applied in impulse coupling experiments of high-energy laser irradiation of space debris. It is difficult to achieve a multi-pulse experiment and thus hard to analyze the multi-pulse impulse coupling effect. Here, we designed a new recoil impulse experimental measurement system of non-contact, multidegrees of freedom, and multi-pulse irradiation. The system used a low-pressure and low-temperature vacuum chamber to simulate the space environment, the pinning effect of magnetic levitation to achieve aluminum target suspension, and high-speed cameras to record the displacement over time to calculate the impulse of the target.Then the impulse coupling experiment of multi-pulse laser irradiation on the aluminum target was performed.The result shows that the multi-pulse impulse coupling effect is not the linear accumulation of coupling results by every single-pulse and multi-pulse coefficient that decreases with the increase of the number of pulses, and eventually stabilizes as the decrease gets smaller.
文摘Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal by co-precipitation with alum（Al_2（SO_4）_3·18H_2O）.Aluminum sulfate was more efficient than the other coagulants for fluoride removal in the pH range between 6 and 8.Nano-crystalline TiO_2 was more effective for fluoride removal than Al and Fe hydroxides in a pH range of 3–5.Coexisting anions in water decreased the removal of fluoride in the order：phosphate（2.5 mg/L） 〉 arsenate（0.1 mg/L） 〉 bicarbonate（200 mg/L） 〉sulfate（100 mg/L） = nitrate（100 mg/L） 〉 silicate（10 mg/L） at a pH of 6.0.The effect of silicate became more significant at pH 〉 7.0.Calcium and magnesium improved the removal of fluoride.Zeta-potential measurements determined that the adsorption of fluoride shifted the PZC of Al（OH）_3 precipitates from 8.9 to 8.4,indicating the chemical adsorption of fluoride at the surface.The presence of fluoride in solution significantly increased the soluble aluminum concentration at pH 〈 6.5.A Visual MINTEQ modeling study indicated that the increased aluminum solubility was caused by the formation of AlF^（2＋）,AlF^（＋2）,and AlF_3complexes.The AlF_x complexes decreased the removal of fluoride during co-precipitation with aluminum sulfate.
