TiO2 nanofibers（TiO2/NFs） have been synthesized through an electrospinning method and annealed at 400, 500 and 600 ℃ to optimize their systems. The effects of annealing temperature on the electrochemical properties...TiO2 nanofibers（TiO2/NFs） have been synthesized through an electrospinning method and annealed at 400, 500 and 600 ℃ to optimize their systems. The effects of annealing temperature on the electrochemical properties for lithium ion batteries（LIBs） are assessed. The obtained LIB properties for TiO2 nanofiber anodes annealed at 400 ℃（denoted as TiO2/NFs-400） are much better than those of TiO2/NFs-500 and TiO2/NFs-600. The TiO2/NFs-400 anodes show good LIB performance with capacities of 180 and 150 m Ah/g tested at 200 and 600 m A/g after 100 cycles with almost no capacity loss and superb rate performance. The XRD results show that the pure anatase phase TiO2 can form at 400 ℃ for TiO2/NFs-400, while mixed phases of anatase and rutile are emerged at TiO2/NFs-500 and TiO2/NFs-600. Furthermore, the TiO2 nanoparticles are combined in nanofibers, and their corresponding crystal particle size for TiO2/NFs-400 was smaller than that of the other two samples. It is concluded that the superior electrochemical performance of the TiO2/NFs-400 anodes could be due to their pure crystal of anatase, small nanoparticles and non-ideal crystal lattices.展开更多
In situ carbon-coated Co_(3)Se_(4)/CoSe_(2)(Co_(x)Se_(y))nanoparticles(NPs)attached on three-dimensional(3D)reduced graphene oxide(rGO)sheets were skillfully developed in this work,which involved the environment-frien...In situ carbon-coated Co_(3)Se_(4)/CoSe_(2)(Co_(x)Se_(y))nanoparticles(NPs)attached on three-dimensional(3D)reduced graphene oxide(rGO)sheets were skillfully developed in this work,which involved the environment-friendly hydrothermal method,freeze drying,and selenide calcination.Within the structure,the glucose-derived carbon layer exhibited significantly homogeneous dispersion under an argon environment.This structure not only has enhanced stability,but also can effectively mitigate the volume swell of Co_(x)Se_(y) particles.The resulted Co_(3)Sea/CoSe_(2)@C/rGO(CSe@C/rGO)exhibited a specific surface area(SSA)of 240.9 m^(2)·g^(-1),offering more electrochemically active sites for the storage of energy related to lithium ions.The rGO matrix held exceptional flexibility and functional structural rigidity,facilitating the swift ion intercalation and ensuring the high conductivity and recyclability of the structure.When applied to anodes designed for lithium-ion batteries(LiBs),this material demonstrated distinguished rate and ultra-high reversible capacity(872.98 mA·h·g^(-1) at 0.5 A·g^(-1)).Meanwhile,its capacity retention reached 119.5%after 500 cycles at 2 A·g^(-1),with a coulombic efficiency of 100%.This work potentially paves the way for generating fast and powerful metal selenide anodes and initiating LiBs with good performance.展开更多
Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for elec...Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for electrons and lithium ions. In this study, hierarchical hollow Li4Ti5O12 urchin-like microspheres with ultra-high specific surface area of over 140 m2·g^-1 and diameter more than 500 nm have been successfully synthesized by combining the versatile sol-gel process and a hydrothermal reaction, and exhibit excellent electrochemical performance with a high specific capacity of 120 mA-h.g-1 at 20 C and long cycling stability of 〈 2% decay after 100 cycles. Ex situ electron energy loss spectroscopy （EELS） analysis of Li4Ti5O12 microspheres at different charge-discharge stages indicates that only a fraction of the TP＊ ions are reduced to Ti3＋ and a phase transformation occurs whereby the spinel phase Li4TisO12 is converted into the rock-salt phase Li7Ti5O12. Even after 100 cycles, the oxidation-reduction reaction between Ti3＋ and Ti4＋ can be carried out much more effectively on the surface of Li4Ti5O12 nanosheets than on commercially available Li4Ti5O12 particles. All the results suggest that these Li4Ti5O12 microspheres may be attractive candidate anode materials for lithium ion batteries.展开更多
A high voltage layered Li1.2Ni0.16Co0.08Mn0.56O2 cathode material with a hollow spherical structure has been synthesized by molten-salt method in a NaCI flux. Characterization by X-ray diffraction and scanning electro...A high voltage layered Li1.2Ni0.16Co0.08Mn0.56O2 cathode material with a hollow spherical structure has been synthesized by molten-salt method in a NaCI flux. Characterization by X-ray diffraction and scanning electron microscopy confirmed its structure and proved that the as-prepared powder is constituted of small, homogenously sized hollow spheres （1-1.5 μm）. The material exhibited enhanced rate capability and high first cycle efficiency due to the good dispersion of secondary particles. Galvanostatic cycling at different temperatures （20, 40, and 60 ℃） and a current rate of 2 C （500 mA.g-1） showed no significant capacity fade.展开更多
Porous Fe3Odcarbon microspheres （PFCMs） were successfully fabricated via a facile electrospray method and subsequent heat treatment, using ferrous acetylacetonate, carbon nanotubes （CNTs）, Ketjen black （KB）, pol...Porous Fe3Odcarbon microspheres （PFCMs） were successfully fabricated via a facile electrospray method and subsequent heat treatment, using ferrous acetylacetonate, carbon nanotubes （CNTs）, Ketjen black （KB）, polyvinylpyrrolidone （PVP）, and polystyrene （PS） as raw materials. The porous carbon sphere framework decorated with well-dispersed CNTs and KB exhibits excellent electronic conductivity and acts as a good host to confine the Fe304 nanoparticles. The abundant mesopores in the carbon matrix derived from polymer pyrolysis can effectively accommodate the volume changes of F%O4 during the charge/ discharge process, facilitate electrolyte penetration, and promote fast ion diffusion. Moreover, a thin amorphous carbon layer on the Fe304 nanoparticle formed during polymer carbonization can further alleviate the mechanical stress associated with volume changes, and preventing aggregation and exfoliation of F%O4 nanoparticles during cycling. Therefore, as anode materials for lithium-ion batteries, the PFCMs exhibited excellent cycling stability with high specific capacities, and outstanding rate performances. After 130 cycles at a small current density of 0.1 A-g-1, the reversible capacity of the PFCM electrode is maintained at almost 1,317 mAh-g-1. High capacities of 746 and 525 mAh-g-1 were still achieved after 300 cycles at the larger currents of I and 5 A-g-1, respectively. The optimized structure design and facile fabrication process provide a promising way for the utilization of energy storage materials, which have high capacities but whose performance is hindered by large volume changes and poor electrical conductivity in lithium or sodium ion batteries.展开更多
Lithium iron silicate （Li2FeSiO4） is capable of affording a much higher capacity than conventional cathodes, and thus, it shows great promise for high-energy battery applications. However, its capacity has often bee...Lithium iron silicate （Li2FeSiO4） is capable of affording a much higher capacity than conventional cathodes, and thus, it shows great promise for high-energy battery applications. However, its capacity has often been adversely affected by poor reaction activity due to the extremely low electronic and ionic conductivity of silicates. Here, we for the first time report on a rational engineering strategy towards a highly active Li2FeSiO4 by designing a carbon nanotube （CNT） directed three-dimensional （3D） porous Li2FeSiO4 composite. As the CNT framework enables rapid electron transport, and the rich pores allow efficient electrolyte penetration, this unique 3D Li2FeSiO4-CNT composite exhibits a high capacity of 214 mAh·g^-1 and retains 96% of this value over 40 cycles, thus, outstripping many previously reported Li2FeSiO4-based materials. Kinetic analysis reveals a high Li＋ diffusivity due to coupling of the migration of electrons and ions. This research highlights the potential for engineering 3D porous structure to construct highly efficient electrodes for battery applications.展开更多
Orthorhombic niobium pentoxide （T-Nb2O5）/reduced graphene oxide nanohybrids were fabricated via the hydrothermal attachment of Nb2Os nanowires to dispersed graphene oxide nanosheets followed by a high-temperature ph...Orthorhombic niobium pentoxide （T-Nb2O5）/reduced graphene oxide nanohybrids were fabricated via the hydrothermal attachment of Nb2Os nanowires to dispersed graphene oxide nanosheets followed by a high-temperature phase transformation. Electrochemical measurements showed that the nanohybrid anodes possessed enhanced reversible capacity and superior cycling stability compared to those of a pristine T-Nb205 nanowire electrode. Owing to the strong bonds between graphene nanosheets and T-Nb2O5 nanowires, the nanohybrids achieved an initial capacity of 227 mAh·g^-1. Additionally, non-aqueous asymmetric supercapacitors （ASCs） were fabricated with the synthesized nanohybrids as the anode and activated carbon as the cathode. The 3 V Li-ion ASC with a LiPF6-based organic electrolyte achieved an energy density of 45.1 Wh·kg^-1 at 715.2 W·kg^-1. The working potential could be further enhanced to 4 V when a polymer ionogel separator （PVDF-HFP/LiTFSI/EMIMBF4） and formulated ionic liquid electrolyte were employed. Such a quasi-solid state ASC could operate at 60℃ and delivered a maximum energy density of 70 Wh·kg^-1 at 1 kW·kg^-1.展开更多
基金supported by the NSFC(21473096,21603112)the Special Project for Fujian Provincial Universities(JK2014055)+1 种基金the Research Project of Science and Technology of Ningde City(20140218,20150169)the Fund Projects of Scientific Research Innovation of Ningde Normal University(2013T03)
文摘TiO2 nanofibers（TiO2/NFs） have been synthesized through an electrospinning method and annealed at 400, 500 and 600 ℃ to optimize their systems. The effects of annealing temperature on the electrochemical properties for lithium ion batteries（LIBs） are assessed. The obtained LIB properties for TiO2 nanofiber anodes annealed at 400 ℃（denoted as TiO2/NFs-400） are much better than those of TiO2/NFs-500 and TiO2/NFs-600. The TiO2/NFs-400 anodes show good LIB performance with capacities of 180 and 150 m Ah/g tested at 200 and 600 m A/g after 100 cycles with almost no capacity loss and superb rate performance. The XRD results show that the pure anatase phase TiO2 can form at 400 ℃ for TiO2/NFs-400, while mixed phases of anatase and rutile are emerged at TiO2/NFs-500 and TiO2/NFs-600. Furthermore, the TiO2 nanoparticles are combined in nanofibers, and their corresponding crystal particle size for TiO2/NFs-400 was smaller than that of the other two samples. It is concluded that the superior electrochemical performance of the TiO2/NFs-400 anodes could be due to their pure crystal of anatase, small nanoparticles and non-ideal crystal lattices.
基金support from the National Natural Science Foundation of China(52071192)the Basic Research Project Fund of Shanxi Province(20210302124491 and 20210302123341)+5 种基金the Key Research and Development Project of Datong(2023003)the Basic Research Project Fund of Shanxi Datong University(2022K10 and 2022K11)the Graduate Education Reform project of Shanxi Datong University(21JG25)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(2021L370)the Graduate Student Education Innovation Project of Shanxi Datong University(23CX25,22CX11,and 22CX20)the Doctoral Research Fund of Shanxi Datong University(2016-B-14,2016-B-20,and 2019-B-11).
文摘In situ carbon-coated Co_(3)Se_(4)/CoSe_(2)(Co_(x)Se_(y))nanoparticles(NPs)attached on three-dimensional(3D)reduced graphene oxide(rGO)sheets were skillfully developed in this work,which involved the environment-friendly hydrothermal method,freeze drying,and selenide calcination.Within the structure,the glucose-derived carbon layer exhibited significantly homogeneous dispersion under an argon environment.This structure not only has enhanced stability,but also can effectively mitigate the volume swell of Co_(x)Se_(y) particles.The resulted Co_(3)Sea/CoSe_(2)@C/rGO(CSe@C/rGO)exhibited a specific surface area(SSA)of 240.9 m^(2)·g^(-1),offering more electrochemically active sites for the storage of energy related to lithium ions.The rGO matrix held exceptional flexibility and functional structural rigidity,facilitating the swift ion intercalation and ensuring the high conductivity and recyclability of the structure.When applied to anodes designed for lithium-ion batteries(LiBs),this material demonstrated distinguished rate and ultra-high reversible capacity(872.98 mA·h·g^(-1) at 0.5 A·g^(-1)).Meanwhile,its capacity retention reached 119.5%after 500 cycles at 2 A·g^(-1),with a coulombic efficiency of 100%.This work potentially paves the way for generating fast and powerful metal selenide anodes and initiating LiBs with good performance.
文摘Large specific surface area is critical for Li4Ti5O12 to achieve good rate capacity and cycling stability, since it can increase the contact area between electrolyte/ electrode and shorten the transport paths for electrons and lithium ions. In this study, hierarchical hollow Li4Ti5O12 urchin-like microspheres with ultra-high specific surface area of over 140 m2·g^-1 and diameter more than 500 nm have been successfully synthesized by combining the versatile sol-gel process and a hydrothermal reaction, and exhibit excellent electrochemical performance with a high specific capacity of 120 mA-h.g-1 at 20 C and long cycling stability of 〈 2% decay after 100 cycles. Ex situ electron energy loss spectroscopy （EELS） analysis of Li4Ti5O12 microspheres at different charge-discharge stages indicates that only a fraction of the TP＊ ions are reduced to Ti3＋ and a phase transformation occurs whereby the spinel phase Li4TisO12 is converted into the rock-salt phase Li7Ti5O12. Even after 100 cycles, the oxidation-reduction reaction between Ti3＋ and Ti4＋ can be carried out much more effectively on the surface of Li4Ti5O12 nanosheets than on commercially available Li4Ti5O12 particles. All the results suggest that these Li4Ti5O12 microspheres may be attractive candidate anode materials for lithium ion batteries.
文摘A high voltage layered Li1.2Ni0.16Co0.08Mn0.56O2 cathode material with a hollow spherical structure has been synthesized by molten-salt method in a NaCI flux. Characterization by X-ray diffraction and scanning electron microscopy confirmed its structure and proved that the as-prepared powder is constituted of small, homogenously sized hollow spheres （1-1.5 μm）. The material exhibited enhanced rate capability and high first cycle efficiency due to the good dispersion of secondary particles. Galvanostatic cycling at different temperatures （20, 40, and 60 ℃） and a current rate of 2 C （500 mA.g-1） showed no significant capacity fade.
文摘Porous Fe3Odcarbon microspheres （PFCMs） were successfully fabricated via a facile electrospray method and subsequent heat treatment, using ferrous acetylacetonate, carbon nanotubes （CNTs）, Ketjen black （KB）, polyvinylpyrrolidone （PVP）, and polystyrene （PS） as raw materials. The porous carbon sphere framework decorated with well-dispersed CNTs and KB exhibits excellent electronic conductivity and acts as a good host to confine the Fe304 nanoparticles. The abundant mesopores in the carbon matrix derived from polymer pyrolysis can effectively accommodate the volume changes of F%O4 during the charge/ discharge process, facilitate electrolyte penetration, and promote fast ion diffusion. Moreover, a thin amorphous carbon layer on the Fe304 nanoparticle formed during polymer carbonization can further alleviate the mechanical stress associated with volume changes, and preventing aggregation and exfoliation of F%O4 nanoparticles during cycling. Therefore, as anode materials for lithium-ion batteries, the PFCMs exhibited excellent cycling stability with high specific capacities, and outstanding rate performances. After 130 cycles at a small current density of 0.1 A-g-1, the reversible capacity of the PFCM electrode is maintained at almost 1,317 mAh-g-1. High capacities of 746 and 525 mAh-g-1 were still achieved after 300 cycles at the larger currents of I and 5 A-g-1, respectively. The optimized structure design and facile fabrication process provide a promising way for the utilization of energy storage materials, which have high capacities but whose performance is hindered by large volume changes and poor electrical conductivity in lithium or sodium ion batteries.
基金Acknowledgements We acknowledge the financial support of the National Natural Science Foundation of China （Nos. 51302181, 51372159, 51422206, and 51672182）, the Thousand Youth Talents Plan, the Jiangsu Shuangchuang Plan, the Natural Science Foundation of Jiangsu Province （Nos. BK20151219 and BK20140009）, the Jiangsu Undergraduate Student Innovation and Entrepreneurship Project, the Priority Academic Program Development of Jiangsu Higher Education Institutions （PAPD）, and Russian Scientific Fund （No. 14-43-00072）.
文摘Lithium iron silicate （Li2FeSiO4） is capable of affording a much higher capacity than conventional cathodes, and thus, it shows great promise for high-energy battery applications. However, its capacity has often been adversely affected by poor reaction activity due to the extremely low electronic and ionic conductivity of silicates. Here, we for the first time report on a rational engineering strategy towards a highly active Li2FeSiO4 by designing a carbon nanotube （CNT） directed three-dimensional （3D） porous Li2FeSiO4 composite. As the CNT framework enables rapid electron transport, and the rich pores allow efficient electrolyte penetration, this unique 3D Li2FeSiO4-CNT composite exhibits a high capacity of 214 mAh·g^-1 and retains 96% of this value over 40 cycles, thus, outstripping many previously reported Li2FeSiO4-based materials. Kinetic analysis reveals a high Li＋ diffusivity due to coupling of the migration of electrons and ions. This research highlights the potential for engineering 3D porous structure to construct highly efficient electrodes for battery applications.
文摘Orthorhombic niobium pentoxide （T-Nb2O5）/reduced graphene oxide nanohybrids were fabricated via the hydrothermal attachment of Nb2Os nanowires to dispersed graphene oxide nanosheets followed by a high-temperature phase transformation. Electrochemical measurements showed that the nanohybrid anodes possessed enhanced reversible capacity and superior cycling stability compared to those of a pristine T-Nb205 nanowire electrode. Owing to the strong bonds between graphene nanosheets and T-Nb2O5 nanowires, the nanohybrids achieved an initial capacity of 227 mAh·g^-1. Additionally, non-aqueous asymmetric supercapacitors （ASCs） were fabricated with the synthesized nanohybrids as the anode and activated carbon as the cathode. The 3 V Li-ion ASC with a LiPF6-based organic electrolyte achieved an energy density of 45.1 Wh·kg^-1 at 715.2 W·kg^-1. The working potential could be further enhanced to 4 V when a polymer ionogel separator （PVDF-HFP/LiTFSI/EMIMBF4） and formulated ionic liquid electrolyte were employed. Such a quasi-solid state ASC could operate at 60℃ and delivered a maximum energy density of 70 Wh·kg^-1 at 1 kW·kg^-1.
