An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material ...An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material was investigated by X-ray, saturation capacity of exchange, pH titration, and distribution coefficient （Kd） measurement. The acid treatments of Mg2Mn0.5Ti0.5O4 caused Mg^2＋ extractions of more than 81%, whereas the dissolutions of Mn^4＋ and Ti^4＋ were less than 10%. The experimental results proved that the acid-treated sample has a capacity of exchange 56 mg·g^-1 for Li^＋ in the solution. The chemical analysis showed that the Li^＋ extraction/insertion progressed mainly by ion-exchange mechanism and surface adsorption.展开更多
Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_...Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.展开更多
Electrochemical insertion/extraction of Li on cathode materials of spinel type LiMn2O4 and ordered rock-salt type LiCo0.5 Ni0.5O2 was measured on samples of which structures were well characterized. On the basis of ex...Electrochemical insertion/extraction of Li on cathode materials of spinel type LiMn2O4 and ordered rock-salt type LiCo0.5 Ni0.5O2 was measured on samples of which structures were well characterized. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materiaIs on electrochemical Li insertion/extraction performance was discussed. These two transition metal oxides belong to onegroup that the crystallinity of these oxides affects to the performance.展开更多
Electrochemical insertion/extraction of Li on cathode materials of anatase type TiO_2, quasilayered structure V_2O_5 and layered structure MoO_3 was measured on samples of which structures were well characterized and...Electrochemical insertion/extraction of Li on cathode materials of anatase type TiO_2, quasilayered structure V_2O_5 and layered structure MoO_3 was measured on samples of which structures were well characterized and showed a wide range of crystallinity. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materials on electrochemical Li insertion/extraction pedermance was discussed. These three transition metal oxides were classified as one group on the basis of whether the crystallinity of these oxides affects to the performance or not; LiMn_2O_4 and LiCo_(0.5)O_2 belongs to the former group and TiO_2, V_2O_5 and MoO_3 to the latter.展开更多
The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illu...The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illustrated. Meanwhile, some recent observation and analyses by in-situ or in operando on the Li-insertion/extraction of LiFePO_4 are summarized and prospected.展开更多
In this work, the liquid-liquid two-phase mass transfer characteristics in the microchannel with deformed insert were studied. The experiment used di-(2-ethylhexyl) phosphoric acid/kerosene-Cu^(2+)as the mass transfer...In this work, the liquid-liquid two-phase mass transfer characteristics in the microchannel with deformed insert were studied. The experiment used di-(2-ethylhexyl) phosphoric acid/kerosene-Cu^(2+)as the mass transfer evaluation system. The effects of some key factors such as the total flow velocity,channel inner diameter, channel length, insert diameter, extractant concentration on the extraction efficiency and mass transfer coefficient were systematically investigated. Compared with a simple microreactor, the liquid-liquid mass transfer enhancement effect of the insert was quantitatively analyzed. The study found that the regular deformation of the insert could cause fluid interface deformation and promote flow state chaos, effectively increasing the mass transfer rate. And the enhancement effect of the insert was more significant at high flow velocities. The highest mass transfer coefficient in the microchannel with deformed insert was 7.886 s^(-1), the enhancement factor could reach 4.17. And only needed 0.095 s to approach the extraction equilibrium. The deformed center insert exhibited an effective liquid-liquid mass transfer enhancement effect, which can be used as a micro-chemical process enhancement method to be applied in the fields of higher throughput mass transfer and chemical synthesis,and at the same time provide ideas for development and structural optimization of microreactors.展开更多
文摘An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material was investigated by X-ray, saturation capacity of exchange, pH titration, and distribution coefficient （Kd） measurement. The acid treatments of Mg2Mn0.5Ti0.5O4 caused Mg^2＋ extractions of more than 81%, whereas the dissolutions of Mn^4＋ and Ti^4＋ were less than 10%. The experimental results proved that the acid-treated sample has a capacity of exchange 56 mg·g^-1 for Li^＋ in the solution. The chemical analysis showed that the Li^＋ extraction/insertion progressed mainly by ion-exchange mechanism and surface adsorption.
基金financially supported by the National Natural Science Foundation of China(Nos.51772138,51572118,and 51601082)the Fundamental Research Funds for the Central Universities(No.lzujbky-2020-59)。
文摘Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.
文摘Electrochemical insertion/extraction of Li on cathode materials of spinel type LiMn2O4 and ordered rock-salt type LiCo0.5 Ni0.5O2 was measured on samples of which structures were well characterized. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materiaIs on electrochemical Li insertion/extraction performance was discussed. These two transition metal oxides belong to onegroup that the crystallinity of these oxides affects to the performance.
文摘Electrochemical insertion/extraction of Li on cathode materials of anatase type TiO_2, quasilayered structure V_2O_5 and layered structure MoO_3 was measured on samples of which structures were well characterized and showed a wide range of crystallinity. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materials on electrochemical Li insertion/extraction pedermance was discussed. These three transition metal oxides were classified as one group on the basis of whether the crystallinity of these oxides affects to the performance or not; LiMn_2O_4 and LiCo_(0.5)O_2 belongs to the former group and TiO_2, V_2O_5 and MoO_3 to the latter.
基金supported by the National Natural Science Foundation of China(No.51504196)Key Research and Development Plan of Shaanxi Province(No.2017ZDXM-GY-039)
文摘The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illustrated. Meanwhile, some recent observation and analyses by in-situ or in operando on the Li-insertion/extraction of LiFePO_4 are summarized and prospected.
基金financially supported by the National Natural Science Foundation of China (21776180)the Key Research Development Project of Sichuan Province (21ZDYF4086)the National Natural Science Foundation of China (22108177)。
文摘In this work, the liquid-liquid two-phase mass transfer characteristics in the microchannel with deformed insert were studied. The experiment used di-(2-ethylhexyl) phosphoric acid/kerosene-Cu^(2+)as the mass transfer evaluation system. The effects of some key factors such as the total flow velocity,channel inner diameter, channel length, insert diameter, extractant concentration on the extraction efficiency and mass transfer coefficient were systematically investigated. Compared with a simple microreactor, the liquid-liquid mass transfer enhancement effect of the insert was quantitatively analyzed. The study found that the regular deformation of the insert could cause fluid interface deformation and promote flow state chaos, effectively increasing the mass transfer rate. And the enhancement effect of the insert was more significant at high flow velocities. The highest mass transfer coefficient in the microchannel with deformed insert was 7.886 s^(-1), the enhancement factor could reach 4.17. And only needed 0.095 s to approach the extraction equilibrium. The deformed center insert exhibited an effective liquid-liquid mass transfer enhancement effect, which can be used as a micro-chemical process enhancement method to be applied in the fields of higher throughput mass transfer and chemical synthesis,and at the same time provide ideas for development and structural optimization of microreactors.
