Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant no...Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant nonsingular terminal sliding mode control method based on support vector machine(SVM)is proposed.A SVM is designed to estimate the fault by off-line learning from small sample data with solving convex quadratic programming method and is introduced into a high-gain observer,so as to improve the state estimation and fault detection accuracy when the fault occurs.The state estimation value of the observer is used for state reconfiguration.A novel nonsingular terminal sliding mode surface is designed,and Lyapunov theorem is used to derive a parameter adaptation law and a control law.It is guaranteed that the proposed controller can achieve asymptotical stability which is superior to many advanced fault-tolerant controllers.In addition,the parameter estimation also can help to diagnose the system faults because the faults can be reflected by the parameters variation.Extensive comparative simulation and experimental results illustrate the effectiveness and advancement of the proposed controller compared with several other main-stream controllers.展开更多
Readout errors caused by measurement noise are a significant source of errors in quantum circuits,which severely affect the output results and are an urgent problem to be solved in noisy-intermediate scale quantum(NIS...Readout errors caused by measurement noise are a significant source of errors in quantum circuits,which severely affect the output results and are an urgent problem to be solved in noisy-intermediate scale quantum(NISQ)computing.In this paper,we use the bit-flip averaging(BFA)method to mitigate frequent readout errors in quantum generative adversarial networks(QGAN)for image generation,which simplifies the response matrix structure by averaging the qubits for each random bit-flip in advance,successfully solving problems with high cost of measurement for traditional error mitigation methods.Our experiments were simulated in Qiskit using the handwritten digit image recognition dataset under the BFA-based method,the Kullback-Leibler(KL)divergence of the generated images converges to 0.04,0.05,and 0.1 for readout error probabilities of p=0.01,p=0.05,and p=0.1,respectively.Additionally,by evaluating the fidelity of the quantum states representing the images,we observe average fidelity values of 0.97,0.96,and 0.95 for the three readout error probabilities,respectively.These results demonstrate the robustness of the model in mitigating readout errors and provide a highly fault tolerant mechanism for image generation models.展开更多
In cloud computing(CC),resources are allocated and offered to the cli-ents transparently in an on-demand way.Failures can happen in CC environment and the cloud resources are adaptable tofluctuations in the performance...In cloud computing(CC),resources are allocated and offered to the cli-ents transparently in an on-demand way.Failures can happen in CC environment and the cloud resources are adaptable tofluctuations in the performance delivery.Task execution failure becomes common in the CC environment.Therefore,fault-tolerant scheduling techniques in CC environment are essential for handling performance differences,resourcefluxes,and failures.Recently,several intelli-gent scheduling approaches have been developed for scheduling tasks in CC with no consideration of fault tolerant characteristics.With this motivation,this study focuses on the design of Gorilla Troops Optimizer Based Fault Tolerant Aware Scheduling Scheme(GTO-FTASS)in CC environment.The proposed GTO-FTASS model aims to schedule the tasks and allocate resources by considering fault tolerance into account.The GTO-FTASS algorithm is based on the social intelligence nature of gorilla troops.Besides,the GTO-FTASS model derives afitness function involving two parameters such as expected time of completion(ETC)and failure probability of executing a task.In addition,the presented fault detector can trace the failed tasks or VMs and then schedule heal submodule in sequence with a remedial or retrieval scheduling model.The experimental vali-dation of the GTO-FTASS model has been performed and the results are inspected under several aspects.Extensive comparative analysis reported the better outcomes of the GTO-FTASS model over the recent approaches.展开更多
In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is sing...In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is single or two-current sensor fault occurs,based on the proposed method the missing current information can be reconstructed by using direct current（DC）bus current sensor and the three-phase current can be updated in time within any two adjacent sampling periods,so as to ensure stability of the closed-loop system.And then the switchover and fault tolerant control of fault current sensor would be accomplished by fault diagnosis method based on adaptive threshold judgment.For the reconstructed signal error caused by the modulation method and the main control target of electric pitch system,a variable universe fuzzy control method is used in the speed loop,which can improve the anti-disturbance ability to load variation,and the robustness of fault tolerance system.The results show that the fault tolerant control method makes the variable pitch control system still has ideal control characteristics in case of sensor failure although part of the system performance is lost,thus the correctness of the proposed method is verified.展开更多
In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swa...In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swarm optimization(PSO) is constructed to model the unknown system dynamics. By utilizing the estimated system states, the particle swarm optimized critic neural network(PSOCNN) is employed to solve the Hamilton-Jacobi-Bellman equation(HJBE) more efficiently.Then, a data-based FTC scheme, which consists of the NN identifier and the fault compensator, is proposed to achieve actuator fault tolerance. The stability of the closed-loop system under actuator faults is guaranteed by the Lyapunov stability theorem. Finally, simulations are provided to demonstrate the effectiveness of the developed method.展开更多
Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP i...Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP is introduced, and it is used to extend the conventional generic model control (GMC) to nonlinear processes with large input time-delay. Then the STF is adopted to estimate process states and sensor bias, the estimated sensor bias is used to drive a fault detection logic. When a sensor fault is detected, the estimated process states by the STF will be used to construct the process output to form a 'soft sensor', which is then used by the NSP (instead of the real outputs) to provide state predictors. These procedures constitute an active fault tolerant control scheme. Finally, simulation results of a three-tank-system demonstrate the effectiveness of the proposed approach.展开更多
A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measure...A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measured information for the FTC is the probability density functions（PDFs） of the system output rather than its measured value.A radial basis functions（RBFs） neural network technique is proposed so that the output PDFs can be formulated in terms of the dynamic weighings of the RBFs neural network.As a result,the nonlinear FTC problem subject to dynamic relation between the input and the output PDFs can be transformed into a nonlinear FTC problem subject to dynamic relation between the control input and the weights of the RBFs neural network approximation to the output PDFs.The FTC design consists of two steps.The first step is fault detection and diagnosis（FDD）,which can produce an alarm when there is a fault in the system and also locate which component has a fault.The second step is to adapt the controller to the faulty case so that the system is able to achieve its target.A linear matrix inequality（LMI） based feasible FTC method is applied such that the fault can be detected and diagnosed.An illustrated example is included to demonstrate the efficiency of the proposed algorithm,and satisfactory results have been obtained.展开更多
In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system ...In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system model.Packet loss dependent Lyapunov function is used and a fault tolerant controller is proposed respectively for arbitrary packet loss process and Markovian packet loss process.Considering a controlled plant with external energy-bounded disturbance,a robust H ∞ fault tolerant controller is designed for the NCS.These results are also expanded to the NCS with packet loss and networked-induced delay.Numerical examples are given to illustrate the effectiveness of the proposed design method.展开更多
A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system d...A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults. Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.展开更多
First, two fault tolerant planning algorithms with avoidance of joint static torque limit or joint dynamic torque limit are proposed respectively. The former is suitable for the low-speed manipulators, and the latter ...First, two fault tolerant planning algorithms with avoidance of joint static torque limit or joint dynamic torque limit are proposed respectively. The former is suitable for the low-speed manipulators, and the latter is suitable for the high-speed manipulators. These algorithms not only can insure manipulation tasks to lie within the fault tolerant workspace but also can avoid joint torque limit, and hence can insure a redundant manipulator to be. fault tolerant in both kinematical sense and dynamic sense. Then, the simulation examples for a planar 3R manipulator demonstrate the validity of these algorithms.展开更多
A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault inf...A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault influence of the faulty one on the whole collaborative system. When the faulty subsystem could not repair itself or the repair process needs a long time, the controller of the fault-free subsystem is reconfigured using the fault diagnosis information and other measured infor- mation, leading to the fault tolerant control of the robot collaborative system. Simulations of fault tolerant control for the robot collaborative system show the effectiveness of the proposed method.展开更多
In this paper the fault tolerant synchronization of two chaotic systems based on fuzzy model and sample data is investigated. The problem of fault tolerant synchronization is formulated to study the global asymptotica...In this paper the fault tolerant synchronization of two chaotic systems based on fuzzy model and sample data is investigated. The problem of fault tolerant synchronization is formulated to study the global asymptotical stability of the error system with the fuzzy sampled-data controller which contains a state feedback controller and a fault compensator. The synchronization can be achieved no matter whether the fault occurs or not. To investigate the stability of the error system and facilitate the design of the fuzzy sampled-data controller, a Takagi Sugeno （T-S） fuzzy model is employed to represent the chaotic system dynamics. To acquire good performance and produce a less conservative analysis result, a new parameter-dependent Lyapunov-Krasovksii functional and a relaxed stabilization technique are considered. The stability conditions based on linear matrix inequality are obtained to achieve the fault tolerant synchronization of the chaotic systems. Finally, a numerical simulation is shown to verify the results.展开更多
An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivati...An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivatives are introduced.Secondly,the linear sliding surface and the equivalent sliding mode controller are constructed,and the sufficient conditions for the stability of the damaged aircraft motion model are given by using the Lyapunov technique.The damage-tolerant controller is designed based on an adaptive sliding mode control for analyzing damaged aircraft systems.Furthermore,the hyperbolic tangent function is utilized to replace the symbolic function in the controller.The feasibility of the hyperbolic tangent function as the switching function is analyzed theoretically.Finally,the Boeing-747100/200 model is taken as an example to demonstrate the efficiency of theoretical results by recognizing the structural fault of aircraft.Numerical results show that the control law has a positive impact on the performance of the closed-loop system,and it also has a better fault tolerance and robustness towards external disturbance compared with traditional methods of damaged aircraft stabilization control.展开更多
A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. ...A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. Based on the Lyapunov stability theory and stochastic analysis, several passive fault tolerant synchronization criteria are derived,which can be described in the form of linear matrix inequalities. Finally,a numerical simulation example is carried out and the results show the validity of the proposed fault tolerant synchronization controller.展开更多
The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust ...The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust fault tolerant tracking controller such that,for the disturbances and sensor faults,the closed-loop system is asymptotically stable with a given disturbance attenuation level.A robust fault tolerant tracking control scheme,combining an observer with H∞ performance,is proposed.Furthermore,it is proved that the designed controller can guarantee asymptotic stability of FFCS despite sensor faults.Finally,a simulation of two UAV formations is employed to demonstrate the effectiveness of the proposed approach.展开更多
An impact angle constrained fuzzy adaptive fault tolerant integrated guidance and control method for Ski-to-Turn(STT)missiles subject to unsteady aerodynamics and multiple disturbances is proposed.Unsteady aerodynamic...An impact angle constrained fuzzy adaptive fault tolerant integrated guidance and control method for Ski-to-Turn(STT)missiles subject to unsteady aerodynamics and multiple disturbances is proposed.Unsteady aerodynamics appears when flight vehicles are in a transonic state or confronted with unstable airflow.Meanwhile,actuator failures and multisource model uncertainties are introduced.However,the boundaries of these multisource uncertainties are assumed unknown.The target is assumed to execute high maneuver movement which is unknown to the missile.Furthermore,impact angle constraint puts forward higher requirements for the interception accuracy of the integrated guidance and control(IGC)method.The impact angle constraint and the precise interception are established as the object of the IGC method.Then,the boundaries of the lumped disturbances are estimated,and several fuzzy logic systems are introduced to compensate the unknown nonlinearities and uncertainties.Next,a series of adaptive laws are developed so that the undesirable effects arising from unsteady aerodynamics,actuator failures and unknown uncertainties could be suppressed.Consequently,an impact angle constrained fuzzy adaptive fault tolerant IGC method with three loops is constructed and a perfect hit-to-kill interception with specified impact angle can be implemented.Eventually,the numerical simulations are conducted to verify the effectiveness and superiority of the proposed method.展开更多
Multimedia Services has drawn much attention from both industrial and academic researchers due to the emerging consumer market, how to provide High-Availability service is one of most important issues to take into acc...Multimedia Services has drawn much attention from both industrial and academic researchers due to the emerging consumer market, how to provide High-Availability service is one of most important issues to take into account. In this paper, a dynamic fault tolerant algorithm is presented for highly available distributed multimedia service, then by introducing SLB(server load balancing) into fault tolerance and switching servers in different ways according to their functions, the proposed schema can preserve reliability and real-time of the system .The analysis and experiments indicate that resuming server's faulty by this method is smooth and transparent to the client The proposed algorithm is effectively improving the reliability of the multimedia service.展开更多
For the problem of sensor faults and actuator faults in aircraft attitude control,this paper proposes a fault tolerant control(FTC)scheme based on extended state observer(ESO)and nonlinear dynamic inversion(NDI).First...For the problem of sensor faults and actuator faults in aircraft attitude control,this paper proposes a fault tolerant control(FTC)scheme based on extended state observer(ESO)and nonlinear dynamic inversion(NDI).First,two ESOs are designed to estimate sensor faults and actuator faults respectively.Second,the angular rate signal is reconstructed according to the estimation of sensor faults.Third,in angular rate loop,NDI is designed based on reconstruction of angular rate signals and estimation of actuator faults.The FTC scheme proposed in this paper is testified through numerical simulations.The results show that it is feasible and has good fault tolerant ability.展开更多
In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant...In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant computer system on a single chip of 5000 gate CMOS gate array. The design, fabrication and test of this single chip system will be discussed..展开更多
Due to the mobility of mobile hosts,checkpoints and message logs of the computing process may disperseover different mobile support stations in the checkpointing and rollback recovery protocol for mobilecomputing.Thre...Due to the mobility of mobile hosts,checkpoints and message logs of the computing process may disperseover different mobile support stations in the checkpointing and rollback recovery protocol for mobilecomputing.Three existing checkpoint handoff schemes do not give well consideration to the efficiency offailure-free process execution and the recovery speed of the failure process at the same time.A dynamicadaptive handoff management of the checkpointing and rollback recovery protocol for mobile computing isproposed in this paper.According to the individual feature and current state of each mobile host,differentimplementations are selected dynamically to complete the handoff process upon the handoff event.Performance analyses show that the proposed handoff management incurs a low loss of performance duringfailure-free and achieves a quick recovery upon the process fault.展开更多
基金Supported by National Natural Science Foundation of China (Grant No.51975294)Fundamental Research Funds for the Central Universities of China (Grant No.30922010706)。
文摘Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant nonsingular terminal sliding mode control method based on support vector machine(SVM)is proposed.A SVM is designed to estimate the fault by off-line learning from small sample data with solving convex quadratic programming method and is introduced into a high-gain observer,so as to improve the state estimation and fault detection accuracy when the fault occurs.The state estimation value of the observer is used for state reconfiguration.A novel nonsingular terminal sliding mode surface is designed,and Lyapunov theorem is used to derive a parameter adaptation law and a control law.It is guaranteed that the proposed controller can achieve asymptotical stability which is superior to many advanced fault-tolerant controllers.In addition,the parameter estimation also can help to diagnose the system faults because the faults can be reflected by the parameters variation.Extensive comparative simulation and experimental results illustrate the effectiveness and advancement of the proposed controller compared with several other main-stream controllers.
基金Project supported by the Natural Science Foundation of Shandong Province,China (Grant No.ZR2021MF049)Joint Fund of Natural Science Foundation of Shandong Province (Grant Nos.ZR2022LLZ012 and ZR2021LLZ001)。
文摘Readout errors caused by measurement noise are a significant source of errors in quantum circuits,which severely affect the output results and are an urgent problem to be solved in noisy-intermediate scale quantum(NISQ)computing.In this paper,we use the bit-flip averaging(BFA)method to mitigate frequent readout errors in quantum generative adversarial networks(QGAN)for image generation,which simplifies the response matrix structure by averaging the qubits for each random bit-flip in advance,successfully solving problems with high cost of measurement for traditional error mitigation methods.Our experiments were simulated in Qiskit using the handwritten digit image recognition dataset under the BFA-based method,the Kullback-Leibler(KL)divergence of the generated images converges to 0.04,0.05,and 0.1 for readout error probabilities of p=0.01,p=0.05,and p=0.1,respectively.Additionally,by evaluating the fidelity of the quantum states representing the images,we observe average fidelity values of 0.97,0.96,and 0.95 for the three readout error probabilities,respectively.These results demonstrate the robustness of the model in mitigating readout errors and provide a highly fault tolerant mechanism for image generation models.
文摘In cloud computing(CC),resources are allocated and offered to the cli-ents transparently in an on-demand way.Failures can happen in CC environment and the cloud resources are adaptable tofluctuations in the performance delivery.Task execution failure becomes common in the CC environment.Therefore,fault-tolerant scheduling techniques in CC environment are essential for handling performance differences,resourcefluxes,and failures.Recently,several intelli-gent scheduling approaches have been developed for scheduling tasks in CC with no consideration of fault tolerant characteristics.With this motivation,this study focuses on the design of Gorilla Troops Optimizer Based Fault Tolerant Aware Scheduling Scheme(GTO-FTASS)in CC environment.The proposed GTO-FTASS model aims to schedule the tasks and allocate resources by considering fault tolerance into account.The GTO-FTASS algorithm is based on the social intelligence nature of gorilla troops.Besides,the GTO-FTASS model derives afitness function involving two parameters such as expected time of completion(ETC)and failure probability of executing a task.In addition,the presented fault detector can trace the failed tasks or VMs and then schedule heal submodule in sequence with a remedial or retrieval scheduling model.The experimental vali-dation of the GTO-FTASS model has been performed and the results are inspected under several aspects.Extensive comparative analysis reported the better outcomes of the GTO-FTASS model over the recent approaches.
基金Natural Science Foundation of Gansu Province(Joint)Project(No.213244)Natural Science Foundation of Gansu Province(No.145RJZA136)Youth Science Foundation of Lanzhou Jiaotong University(No.2013040)
文摘In view of the current sensors failure in electric pitch system,a variable universe fuzzy fault tolerant control method of electric pitch control system based on single current detection is proposed.When there is single or two-current sensor fault occurs,based on the proposed method the missing current information can be reconstructed by using direct current（DC）bus current sensor and the three-phase current can be updated in time within any two adjacent sampling periods,so as to ensure stability of the closed-loop system.And then the switchover and fault tolerant control of fault current sensor would be accomplished by fault diagnosis method based on adaptive threshold judgment.For the reconstructed signal error caused by the modulation method and the main control target of electric pitch system,a variable universe fuzzy control method is used in the speed loop,which can improve the anti-disturbance ability to load variation,and the robustness of fault tolerance system.The results show that the fault tolerant control method makes the variable pitch control system still has ideal control characteristics in case of sensor failure although part of the system performance is lost,thus the correctness of the proposed method is verified.
基金supported in part by the National Natural ScienceFoundation of China(61533017,61973330,61773075,61603387)the Early Career Development Award of SKLMCCS(20180201)the State Key Laboratory of Synthetical Automation for Process Industries(2019-KF-23-03)。
文摘In this paper, a data-based fault tolerant control(FTC) scheme is investigated for unknown continuous-time(CT)affine nonlinear systems with actuator faults. First, a neural network(NN) identifier based on particle swarm optimization(PSO) is constructed to model the unknown system dynamics. By utilizing the estimated system states, the particle swarm optimized critic neural network(PSOCNN) is employed to solve the Hamilton-Jacobi-Bellman equation(HJBE) more efficiently.Then, a data-based FTC scheme, which consists of the NN identifier and the fault compensator, is proposed to achieve actuator fault tolerance. The stability of the closed-loop system under actuator faults is guaranteed by the Lyapunov stability theorem. Finally, simulations are provided to demonstrate the effectiveness of the developed method.
基金Supported by the National Natural Science Foundation of China (No. 60025307, No. 60234010) the National 863 Project(No. 2001AA413130,2002AA412420)+1 种基金 Research Fund for the Doctoral Program of Higher Education (No. 20020003063) the National 973 Program
文摘Based on a nonlinear state predictor (NSP) and a strong tracking filter (STF), a sensor fault tolerant generic model control (FTGMC) approach for a class of nonlinear time-delay processes is proposed. First, the NSP is introduced, and it is used to extend the conventional generic model control (GMC) to nonlinear processes with large input time-delay. Then the STF is adopted to estimate process states and sensor bias, the estimated sensor bias is used to drive a fault detection logic. When a sensor fault is detected, the estimated process states by the STF will be used to construct the process output to form a 'soft sensor', which is then used by the NSP (instead of the real outputs) to provide state predictors. These procedures constitute an active fault tolerant control scheme. Finally, simulation results of a three-tank-system demonstrate the effectiveness of the proposed approach.
基金supported by the UK Leverhulme Trust (F/00 120/BC)the National Natural Science Foundation of China (6082800760974029)
文摘A new fault tolerant control（FTC） via a controller reconfiguration approach for general stochastic nonlinear systems is studied.Different from the formulation of classical FTC methods,it is supposed that the measured information for the FTC is the probability density functions（PDFs） of the system output rather than its measured value.A radial basis functions（RBFs） neural network technique is proposed so that the output PDFs can be formulated in terms of the dynamic weighings of the RBFs neural network.As a result,the nonlinear FTC problem subject to dynamic relation between the input and the output PDFs can be transformed into a nonlinear FTC problem subject to dynamic relation between the control input and the weights of the RBFs neural network approximation to the output PDFs.The FTC design consists of two steps.The first step is fault detection and diagnosis（FDD）,which can produce an alarm when there is a fault in the system and also locate which component has a fault.The second step is to adapt the controller to the faulty case so that the system is able to achieve its target.A linear matrix inequality（LMI） based feasible FTC method is applied such that the fault can be detected and diagnosed.An illustrated example is included to demonstrate the efficiency of the proposed algorithm,and satisfactory results have been obtained.
基金supported by National Natural Science Foundation of China (No. 60874052)
文摘In this paper,a fault tolerant control with the consideration of actuator fault for a networked control system （NCS） with packet loss is addressed.The NCS with data packet loss can be described as a switched system model.Packet loss dependent Lyapunov function is used and a fault tolerant controller is proposed respectively for arbitrary packet loss process and Markovian packet loss process.Considering a controlled plant with external energy-bounded disturbance,a robust H ∞ fault tolerant controller is designed for the NCS.These results are also expanded to the NCS with packet loss and networked-induced delay.Numerical examples are given to illustrate the effectiveness of the proposed design method.
基金Supported by National Natural Science Foundation of P.R.China (60574083)Key Laboratory of Process Industry Automation, Ministry of Education of P.R.China (PAL200514)Innovation Scientific Fund of Nanjing University of Aeronautics and Astronautics (Y0508-031)
文摘A model-based fault tolerant control approach for hybrid linear dynamic systems is proposed in this paper. The proposed method, taking advantage of reliable control, can maintain the performance of the faulty system during the time delay of fault detection and diagnosis (FDD) and fault accommodation (FA), which can be regarded as the first line of defence against sensor faults. Simulation results of a three-tank system with sensor fault are given to show the efficiency of the method.
基金Supported by Beijing Municipal Natural Science Foundation Committee and the High Technology Research and Development Programme of China （No.2003AA404140）.
文摘First, two fault tolerant planning algorithms with avoidance of joint static torque limit or joint dynamic torque limit are proposed respectively. The former is suitable for the low-speed manipulators, and the latter is suitable for the high-speed manipulators. These algorithms not only can insure manipulation tasks to lie within the fault tolerant workspace but also can avoid joint torque limit, and hence can insure a redundant manipulator to be. fault tolerant in both kinematical sense and dynamic sense. Then, the simulation examples for a planar 3R manipulator demonstrate the validity of these algorithms.
基金Supported by the National Natural Science Foundation of China (61104022, 10971202)the Science and Technology Research Key Program of Henan Educational Committee(12A120009)
文摘A new fault-tolerant control scheme is proposed for a nonlinear collaborative system that contains two robot subsystems. When fault occurs in one subsystem, the fault-free subsystem is used to compensate the fault influence of the faulty one on the whole collaborative system. When the faulty subsystem could not repair itself or the repair process needs a long time, the controller of the fault-free subsystem is reconfigured using the fault diagnosis information and other measured infor- mation, leading to the fault tolerant control of the robot collaborative system. Simulations of fault tolerant control for the robot collaborative system show the effectiveness of the proposed method.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50977008,60774048,and 60774093)the National High Technology Research and Development Program of China (Grant No. 2009AA04Z127)+1 种基金the Special Grant of Financial Support from China Postdoctoral Science Foundation (Grant No. 200902547)Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 200801451096)
文摘In this paper the fault tolerant synchronization of two chaotic systems based on fuzzy model and sample data is investigated. The problem of fault tolerant synchronization is formulated to study the global asymptotical stability of the error system with the fuzzy sampled-data controller which contains a state feedback controller and a fault compensator. The synchronization can be achieved no matter whether the fault occurs or not. To investigate the stability of the error system and facilitate the design of the fuzzy sampled-data controller, a Takagi Sugeno （T-S） fuzzy model is employed to represent the chaotic system dynamics. To acquire good performance and produce a less conservative analysis result, a new parameter-dependent Lyapunov-Krasovksii functional and a relaxed stabilization technique are considered. The stability conditions based on linear matrix inequality are obtained to achieve the fault tolerant synchronization of the chaotic systems. Finally, a numerical simulation is shown to verify the results.
基金The National Natural Science Foundation of China(No.61973172,61973175)the Key Technologies R&D Program of Tianjin(No.19JCZDJC32800).
文摘An equivalent sliding mode fault-tolerant control method with continuous switching is proposed for vertical tail damage.First,the nonlinear damage model of aircraft and the estimation of stability and control derivatives are introduced.Secondly,the linear sliding surface and the equivalent sliding mode controller are constructed,and the sufficient conditions for the stability of the damaged aircraft motion model are given by using the Lyapunov technique.The damage-tolerant controller is designed based on an adaptive sliding mode control for analyzing damaged aircraft systems.Furthermore,the hyperbolic tangent function is utilized to replace the symbolic function in the controller.The feasibility of the hyperbolic tangent function as the switching function is analyzed theoretically.Finally,the Boeing-747100/200 model is taken as an example to demonstrate the efficiency of theoretical results by recognizing the structural fault of aircraft.Numerical results show that the control law has a positive impact on the performance of the closed-loop system,and it also has a better fault tolerance and robustness towards external disturbance compared with traditional methods of damaged aircraft stabilization control.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61374180)the Science Foundation of Nanjing University of Posts and Telecommunications(Grant No.NY215129)
文摘A fault tolerant synchronization strategy is proposed to synchronize a complex network with random time delays and sensor faults. Random time delays over the network transmission are described by using Markov chains. Based on the Lyapunov stability theory and stochastic analysis, several passive fault tolerant synchronization criteria are derived,which can be described in the form of linear matrix inequalities. Finally,a numerical simulation example is carried out and the results show the validity of the proposed fault tolerant synchronization controller.
基金supported in part by the Post Doctoral Research Foundation of Jiangsu Province(No.1701140B)the National Natural Science Foundation of China (No. 61403195)the GF Research and Development Project of the Nanjing Tech Universities(No.201709)
文摘The command tracking problem of formation flight control system(FFCS)for multiple unmanned aerial vehicles(UAVs)with sensor faults is discussed.And the objective of the addressed control problem is to design a robust fault tolerant tracking controller such that,for the disturbances and sensor faults,the closed-loop system is asymptotically stable with a given disturbance attenuation level.A robust fault tolerant tracking control scheme,combining an observer with H∞ performance,is proposed.Furthermore,it is proved that the designed controller can guarantee asymptotic stability of FFCS despite sensor faults.Finally,a simulation of two UAV formations is employed to demonstrate the effectiveness of the proposed approach.
基金supported by the National Natural Science Foundation of China(62003264).
文摘An impact angle constrained fuzzy adaptive fault tolerant integrated guidance and control method for Ski-to-Turn(STT)missiles subject to unsteady aerodynamics and multiple disturbances is proposed.Unsteady aerodynamics appears when flight vehicles are in a transonic state or confronted with unstable airflow.Meanwhile,actuator failures and multisource model uncertainties are introduced.However,the boundaries of these multisource uncertainties are assumed unknown.The target is assumed to execute high maneuver movement which is unknown to the missile.Furthermore,impact angle constraint puts forward higher requirements for the interception accuracy of the integrated guidance and control(IGC)method.The impact angle constraint and the precise interception are established as the object of the IGC method.Then,the boundaries of the lumped disturbances are estimated,and several fuzzy logic systems are introduced to compensate the unknown nonlinearities and uncertainties.Next,a series of adaptive laws are developed so that the undesirable effects arising from unsteady aerodynamics,actuator failures and unknown uncertainties could be suppressed.Consequently,an impact angle constrained fuzzy adaptive fault tolerant IGC method with three loops is constructed and a perfect hit-to-kill interception with specified impact angle can be implemented.Eventually,the numerical simulations are conducted to verify the effectiveness and superiority of the proposed method.
文摘Multimedia Services has drawn much attention from both industrial and academic researchers due to the emerging consumer market, how to provide High-Availability service is one of most important issues to take into account. In this paper, a dynamic fault tolerant algorithm is presented for highly available distributed multimedia service, then by introducing SLB(server load balancing) into fault tolerance and switching servers in different ways according to their functions, the proposed schema can preserve reliability and real-time of the system .The analysis and experiments indicate that resuming server's faulty by this method is smooth and transparent to the client The proposed algorithm is effectively improving the reliability of the multimedia service.
基金supported by the Chinese Aviation Science Fund(20160757001)the National Natural Science Foundation of China(10577012)。
文摘For the problem of sensor faults and actuator faults in aircraft attitude control,this paper proposes a fault tolerant control(FTC)scheme based on extended state observer(ESO)and nonlinear dynamic inversion(NDI).First,two ESOs are designed to estimate sensor faults and actuator faults respectively.Second,the angular rate signal is reconstructed according to the estimation of sensor faults.Third,in angular rate loop,NDI is designed based on reconstruction of angular rate signals and estimation of actuator faults.The FTC scheme proposed in this paper is testified through numerical simulations.The results show that it is feasible and has good fault tolerant ability.
文摘In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant computer system on a single chip of 5000 gate CMOS gate array. The design, fabrication and test of this single chip system will be discussed..
基金Supported by the National Natural Science Foundation of China (No. 60873138)Postdoctoral Scientific Research Foundation of Heilongjiang (No. LBH-008124)the Fundamental Research Funds for the Central Universities (No. HEUCFT1007)
文摘Due to the mobility of mobile hosts,checkpoints and message logs of the computing process may disperseover different mobile support stations in the checkpointing and rollback recovery protocol for mobilecomputing.Three existing checkpoint handoff schemes do not give well consideration to the efficiency offailure-free process execution and the recovery speed of the failure process at the same time.A dynamicadaptive handoff management of the checkpointing and rollback recovery protocol for mobile computing isproposed in this paper.According to the individual feature and current state of each mobile host,differentimplementations are selected dynamically to complete the handoff process upon the handoff event.Performance analyses show that the proposed handoff management incurs a low loss of performance duringfailure-free and achieves a quick recovery upon the process fault.
