Understanding and predicting the distribution of fractures in the deep tight sandstone reservoir are important for both gas exploration and exploitation activities in Kuqa Depression. We analyzed the characteristics o...Understanding and predicting the distribution of fractures in the deep tight sandstone reservoir are important for both gas exploration and exploitation activities in Kuqa Depression. We analyzed the characteristics of regional structural evolution and paleotectonic stress setting based on acoustic emission tests and structural feature analysis. Several suites of geomechanical models and experiments were developed to analyze how the geological factors influenced and controlled the development and distribution of fractures during folding. The multilayer model used elasto-plastic finite element method to capture the stress variations and slip along bedding surfaces, and allowed large deformation. The simulated results demonstrate that this novel Quasi-Binary Method coupling composite failure criterion and geomechanical model can effectively quantitatively predict the developed area of fracture parameters in fault-related folds. High-density regions of fractures are mainly located in the fold limbs during initial folding stage, then gradually migrate from forelimb to backlimb, from limbs to hinge, from deep to shallow along with the fold uplift. Among these factors, the fold uplift and slip displacement along fault have the most important influence on distributions of fractures and stress field, meanwhile the lithology and distance to fault have also has certain influences. When the uplift height exceeds approximately 55 percent of the total height of fold the facture density reaches a peak, which conforms to typical top-graben fold type with large amplitude and high-density factures in the top. The overall simulated results match well with core observation and FMI results both in the whole geometry and fracture distribution.展开更多
Folds have a significant development in the Cretaceous-Tertiary rock units of the northern part of Bagheran Mountains in southwest Birjand between Lut and Sistan structural zones. The general trends of fold axis and a...Folds have a significant development in the Cretaceous-Tertiary rock units of the northern part of Bagheran Mountains in southwest Birjand between Lut and Sistan structural zones. The general trends of fold axis and axial surface are E-W and the folds are less exposed by distance from mountain and plain boundary. Geometric and kinematic status investigation of folds (such as f2 fold in the middle part) and faults shows that faulting process has created some of the folds leading to their development. Such structures are described as fault-related folds. Also, analysis of geometry and mechanism of faults indicate that back thrusts have the largest influence on generation and development of folds in this region.展开更多
The prion protein(PrP) is the key molecular and pathological mediator of prion diseases,a heterogeneous group of brain disorders with fatal outcomes.Prion diseases are rare but deserve special attention because of the...The prion protein(PrP) is the key molecular and pathological mediator of prion diseases,a heterogeneous group of brain disorders with fatal outcomes.Prion diseases are rare but deserve special attention because of their unique familial,sporadic,and transmissible etiologies,all caused by a single agent:misfolded conformations of PrP.展开更多
Spectral compressive imaging has emerged as a powerful technique to collect the 3D spectral information as 2D measurements.The algorithm for restoring the original 3D hyperspectral images(HSIs)from compressive measure...Spectral compressive imaging has emerged as a powerful technique to collect the 3D spectral information as 2D measurements.The algorithm for restoring the original 3D hyperspectral images(HSIs)from compressive measurements is pivotal in the imaging process.Early approaches painstakingly designed networks to directly map compressive measurements to HSIs,resulting in the lack of interpretability without exploiting the imaging priors.While some recent works have introduced the deep unfolding framework for explainable reconstruction,the performance of these methods is still limited by the weak information transmission between iterative stages.In this paper,we propose a Memory-Augmented deep Unfolding Network,termed MAUN,for explainable and accurate HSI reconstruction.Specifically,MAUN implements a novel CNN scheme to facilitate a better extrapolation step of the fast iterative shrinkage-thresholding algorithm,introducing an extra momentum incorporation step for each iteration to alleviate the information loss.Moreover,to exploit the high correlation of intermediate images from neighboring iterations,we customize a cross-stage transformer(CSFormer)as the deep denoiser to simultaneously capture self-similarity from both in-stage and cross-stage features,which is the first attempt to model the long-distance dependencies between iteration stages.Extensive experiments demonstrate that the proposed MAUN is superior to other state-of-the-art methods both visually and metrically.Our code is publicly available at https://github.com/HuQ1an/MAUN.展开更多
Single-molecule magnetic tweezers(MTs) have revealed multiple transition barriers along the unfolding pathway of several two-state proteins, such as GB1 and Csp. In this study, we utilized MTs to measure the force-dep...Single-molecule magnetic tweezers(MTs) have revealed multiple transition barriers along the unfolding pathway of several two-state proteins, such as GB1 and Csp. In this study, we utilized MTs to measure the force-dependent folding and unfolding rates of both protein L(PLWT) and its Y47W mutant(PLY47W) where the mutation point is not at the force-bearing β-strands. The measurements were conducted within a force range of 3–120 pN. Notably, the unfolding rates of both PLWT and PWY47W exhibit distinct force sensitivities below 50 pN and above 60 pN, implying a two-barrier free energy landscape. Both PLWT and PLY47W share the same force-dependent folding rate and the same transition barriers,but the unfolding rate of PLY47W is faster than that of PLWT. Our finding demonstrates that the residue outside of the force-bearing region will also affect the force-induced unfolding dynamics.展开更多
Wideband spectrum sensing with a high-speed analog-digital converter(ADC) presents a challenge for practical systems.The Nyquist folding receiver(NYFR) is a promising scheme for achieving cost-effective real-time spec...Wideband spectrum sensing with a high-speed analog-digital converter(ADC) presents a challenge for practical systems.The Nyquist folding receiver(NYFR) is a promising scheme for achieving cost-effective real-time spectrum sensing,which is subject to the complexity of processing the modulated outputs.In this case,a multipath NYFR architecture with a step-sampling rate for the different paths is proposed.The different numbers of digital channels for each path are designed based on the Chinese remainder theorem(CRT).Then,the detectable frequency range is divided into multiple frequency grids,and the Nyquist zone(NZ) of the input can be obtained by sensing these grids.Thus,high-precision parameter estimation is performed by utilizing the NYFR characteristics.Compared with the existing methods,the scheme proposed in this paper overcomes the challenge of NZ estimation,information damage,many computations,low accuracy,and high false alarm probability.Comparative simulation experiments verify the effectiveness of the proposed architecture in this paper.展开更多
Nyquist Folding Receiver(NYFR)is a perceptron structure that realizes a low probability of intercept(LPI)signal analog to information.Aiming at the problem of LPI radar signal receiving,the time domain,frequency domai...Nyquist Folding Receiver(NYFR)is a perceptron structure that realizes a low probability of intercept(LPI)signal analog to information.Aiming at the problem of LPI radar signal receiving,the time domain,frequency domain,and time-frequency domain problems of signals intercepted by NYFR structure are studied.Combined with the time-frequency analysis(TFA)method,a radar recognition scheme based on deep learning(DL)is introduced,which can reliably classify common LPI radar signals.First,the structure of NYFR and its characteristics in the time domain,frequency domain,and time and frequency domain are analyzed.Then,the received signal is then converted into a time-frequency image(TFI).Finally,four kinds of DL algorithms are used to classify LPI radar signals.Simulation results demonstrate the correctness of the NYFR structure,and the effectiveness of the proposed recognition method is verified by comparison experiments.展开更多
Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy ...Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy areas. The wind and sand flow in the region is notably bi-directional. To shield railroads from sand, a unique sand fence made of folded linear high-density polyethylene(HDPE) is used, aligning with the principle that the dominant wind direction is perpendicular to the fence. This study employed field observations and numerical simulations to investigate the effectiveness of these HDPE sand fences in altering flow field distribution and offering protection. It also explored how these fences affect the deposition and erosion of sand particles. Findings revealed a significant reduction in wind speed near the fence corner;the minimum horizontal wind speed on the leeward side of the first sand fence(LSF) decreased dramatically from 3 m/s to 0.64 m/s. The vortex area on the LSF markedly impacted horizontal wind speeds. Within the LSF, sand deposition was a primary occurrence. As wind speeds increased, the deposition zone shrank, whereas the positive erosion zone expanded. Close to the folded corners of the HDPE sand fence, there was a notable shift from the positive erosion zone to a deposition zone. Field tests and numerical simulations confirmed the high windproof efficiency(WE) and sand resistance efficiency(SE) in the HDPE sand fence. Folded linear HDPE sheet sand fence can effectively slow down the incoming flow and reduce the sand content, thus achieving good wind and sand protection. This study provides essential theoretical guidance for the design and improvement of wind and sand protection systems in railroad engineering.展开更多
Protein folding in crowding cellular environment often relies on the assistance of various chaperones. Hsp70 is one of the most ubiquitous chaperones in cells. Previous studies showed that the chaperone–client intera...Protein folding in crowding cellular environment often relies on the assistance of various chaperones. Hsp70 is one of the most ubiquitous chaperones in cells. Previous studies showed that the chaperone–client interactions at the open state tend to remodel the protein folding energy landscape and direct the protein folding as a foldase. In this work, we further investigate how the chaperone–client interaction strength modulates the foldase function of Hsp70 by using molecular simulations. The results showed that the time of substrate folding(including the whole folding step and substrate release step) has a non-monotonic dependence on the interaction strength. With the increasing of the chaperone–client interaction strength, the folding time decreases first, and then increases. More detailed analysis showed that when the chaperone–client interaction is too strong, even small number of chaperones–client contacts can maintain the substrate bound with the chaperone. The sampling of the transient chaperones–client complex with sparse inter-molecule contacts makes the client protein have chance to access the misfolded state even it is bound with chaperone. The current results suggest that the interaction strength is an important factor controlling the Hsp70 chaperoning function.展开更多
The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thru...The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thrust belt(YFTB).However,there is still debate regarding the tectonic evolutionary history of the YFTB during the late Permian to Triassic period,specifically regarding the timing of subduction and collision between the NCC and the Paleo-Asian Ocean.The Nianzi granite unit exhibits unique petrological,geochronological and geochemical signatures that shed light on the tectonic evolutionary history of the YFTB.This study presents detailed petrology,whole-rock geochemistry,together with Sr-Nd isotopic,zircon U-Pb dating and Lu-Hf isotopic data of the granites within the Nianzi granite unit.Our findings demonstrate that the granites primarily consist of subhedral K-feldspar,plagioclase,quartz,minor biotite and hornblende,with accessory titanite,apatite,magnetite and zircon.Zircon U-Pb dating indicates that the Xiaolianghou granite was emplaced at 247.5±0.62 Ma.Additionally,the adakitic characteristics of the Nianzi,Xiawopu and Xiaolianghou granitic intrusions,such as high Sr and Ba contents and high ratios of Sr/Y and(La/Yb)N,combined with negative Sr-Nd and Lu-Hf isotopes(87Sr/86Sr)i=0.705681–0.7057433,εNd(t)=−21.98 to−20.97,zirconεHf(t)=−20.26 to−9.92,as well as the I-type granite features of high SiO_(2),Na_(2)O and K_(2)O/Na_(2)O ratios,enriched Rb,K,Sr and Ba,along with depleted Th,U,Nb,Ta,P and Ti,suggest that the Nianzi granitic unit was mainly derived from the partial melting of a thickened lower crust containing hydrous,calc-alkaline to high-K calc-alkaline,mafic to intermediate metamorphic rocks.In light of these parameters,we further integrate our data with previous studies and conclude that the Nianzi granitic unit was generated in a post-collisional extensional environment during the Early Triassic.展开更多
The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introdu...The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.展开更多
BACKGROUND Nasolabial fold(NLF)depression can affect the facial appearance of patients to some extent and increase their psychological burdens.In recent years,autologous fat grafting(AFG)combined with botulinum toxin ...BACKGROUND Nasolabial fold(NLF)depression can affect the facial appearance of patients to some extent and increase their psychological burdens.In recent years,autologous fat grafting(AFG)combined with botulinum toxin A(BTX-A)injection(AFG+BTX-A injection)has been gradually applied in the treatment of patients with NLF depression.Although studies have been conducted on the efficacy and safety of AFG+BTX-A injection in treating NLF depression,the experimental design,observational indicators,and sample enrollment criteria vary remarkably,making it difficult to draw convincing and consistent conclusions.Thus,further relevant research is warranted.AIM To assess the esthetic improvement,efficacy,and safety of AFG+BTX-A injections in patients with NLF depression.METHODS This study included 60 patients with NLF depression who were treated in our hospital from February 2019 to April 2021.These patients were categorized into control(n=30)and observation(n=30)groups.The observation group received AFG+BTX-A injection,whereas the control group underwent AFG only.All patients were evaluated using the wrinkle severity rating scale(WSRS)and global aesthetic improvement scale.The compactness of facial contours,skin evaluation indexes,adverse reactions,and satisfaction of the two groups were evaluated 3 months postoperatively.RESULTS The WSRS scores of the observation group at 1,3,and 6 months postoperatively were lower than those of the control group(P<0.05).Three months postoperatively,facial fine lines and pores showed obvious improvement and the skin index score was higher in the observation group than in the control group(P<0.05).The compactness of facial contours was better in the observation group than in the control group(P<0.05).In addition,no remarkable differences were noted in the incidence of postoperative adverse reactions such as facial stiffness,facial asymmetry,facial bruising,and facial concavity inequality(P>0.05).CONCLUSION AFG+BTX-A injection is a highly safe,cost-effective,effective,and long-lasting treatment for NLF depression with high esthetic value,which should be promoted in the future.展开更多
A CMOS folding and interpolating analog-to-digital converter (ADC) for embedded application is described.The circuit is fully compatible with standard digital CMOS technology.A modified folding block implemented witho...A CMOS folding and interpolating analog-to-digital converter (ADC) for embedded application is described.The circuit is fully compatible with standard digital CMOS technology.A modified folding block implemented without resistor contributes to a small chip area.At the input stage,offset averaging reduces the input capacitance and the distributed track-and-hold circuits are proposed to improve signal-to-noise-plus-distortion ratio.The 200Ms/s 8bit ADC with 177mW total power consumption at 3.3V power supply is realized in standard digital 0.18μm 3.3V CMOS technology.展开更多
In an attempt to realize a flapping wing micro-air vehicle with morphing wings, we report on improvements to our previousfoldable artificial hind wing.Multiple hinges, which were implemented to mimic the bending zone ...In an attempt to realize a flapping wing micro-air vehicle with morphing wings, we report on improvements to our previousfoldable artificial hind wing.Multiple hinges, which were implemented to mimic the bending zone of a beetle hind wing, weremade of small composite hinge plates and tiny aluminum rivets.The buck-tails of rivets were flared after the hinge plates wereassembled with the rivets so that the folding/unfolding motions could be completed in less time, and the straight shape of theartificial hind wing could be maintained after fabrication.Folding and unfolding actions were triggered by electrically-activatedShape Memory Alloy (SMA) wires.For wing folding, the actuation characteristics of the SMA wire actuator were modifiedthrough heat treatment.Through a series of flapping tests, we confirmed that the artificial wings did not fold back and arbitrarilyfluctuate during the flapping motion.展开更多
A serial of"comb-like and trough-like"folds developed in eastern Sichuan,controlled by the multi-layer detachment folding,is different from the classical Jura-type structure in their development.The key factor resul...A serial of"comb-like and trough-like"folds developed in eastern Sichuan,controlled by the multi-layer detachment folding,is different from the classical Jura-type structure in their development.The key factor resulting in the development of these structures is the occurrence of detachment layers in different parts of Neoprotozoic to Mesozoic stratigraphy of study area,which, from the bottom to the top,are the lower part of Banxi Group,Lower Cambrian(Niutitang Formation),Lower Silurian(Longmaxi Formation and Luoreping Formation),Upper Permian (Wujiaping Formation) and Lower Triassic(Daye Formation).On the basis of field survey combined with sand-box modeling,this study argued that the detachment layer of the lower part of Banxi Group controlled the development of the"comb-like"folds,and the lower part of Cambrian detachment layer controlled the development of"trough-like"folds.Because of several detachment layers occurring in the study area,the development of duplex structures different scales is an important deformation mechanism,and the duplexes are the important structures distinguished from the typical detachment folding structures.Due to these duplexes,the surface structures and structural highs may not be the structural highs in the depth.Meanwhile,the detachment layers are good channels for oil/ gas migration benefiting the understanding of accumulation and migration of oil and gas.展开更多
The thin-walled tube flexure(TWTF) hinges have important potential application value in the deployment mechanisms of satellite and solar array, but the optimal design of the TWTF hinges haven't been completely solv...The thin-walled tube flexure(TWTF) hinges have important potential application value in the deployment mechanisms of satellite and solar array, but the optimal design of the TWTF hinges haven't been completely solved, which restricts their applications. An optimal design method for the qusai-static folding and deploying of TWTF hinges with double slots is presented based on the response surface theory. Firstly, the full factorial method is employed to design of the experiments. Then, the finite element models of the TWTF hinges with double slots are constructed to simulate the qusai-static folding and deploying non-linear analysis. What's more, the mathematical model of the TWTF flexure hinge quasi-static folding and deploying properties are derived by the response surface method. Considering of small mass and high stability, the peak moment of quasi-static folding and deploying as well as the lightless are set as the objectives to get the optimal performances. The relative errors of the objectives between the optimal design results and the FE analysis results are less than 7%, which demonstrates the precision of the surrogate models. Lastly, the parameter study shows that both the slots length and the slots width both have significant effects to the peak moment of quasi-static folding and deploying of TWTF hinges with double slots. However, the maximum Mises stress of quasi-static folding is more sensitive to the slots length than the slots width. The proposed research can be applied to optimize other thin-walled flexure hinges under quasi-static folding and deploying, which is of great importance to design of flexure hinges with high stability and low stress.展开更多
Currently many facets of genetic information are illdefined. In particular, how protein folding is genetically regulated has been a long-standing issue for genetics and protein biology. And a generic mechanistic model...Currently many facets of genetic information are illdefined. In particular, how protein folding is genetically regulated has been a long-standing issue for genetics and protein biology. And a generic mechanistic model with supports of genomic data is still lacking. Recent technological advances have enabled much needed genome-wide experiments. While putting the effect of codon optimality on debate, these studies have supplied mounting evidence suggesting a role of m RNA structure in the regulation of protein folding by modulating translational elongation rate. In conjunctions with previous theories, this mechanistic model of protein folding guided by m RNA structure shall expand our understandings of genetic information and offer new insights into various biomedical puzzles.展开更多
A folding beam-type piezoelectric phononic crystal model is proposed to isolate vibration. Two piezoelectric bimorphs are joined by two masses as a folding structure to comprise each unit cell of the piezoelectric pho...A folding beam-type piezoelectric phononic crystal model is proposed to isolate vibration. Two piezoelectric bimorphs are joined by two masses as a folding structure to comprise each unit cell of the piezoelectric phononic crystal. Each bimorph is connected independently by a resistive-inductive resonant shunting circuit. The folding structure extends the propagation path of elastic waves, while its structure size remains quite small. Propagation of coupled extension-flexural elastic waves is studied by the classical laminated beam theory and transfer matrix method. The theoretical model is further verified with the finite element method(FEM). The effects of geometrical and circuit parameters on the band gaps are analyzed. With only 4 unit cells, the folding beam-type piezoelectric phononic crystal generates two Bragg band gaps of 369 Hz to1 687 Hz and 2 127 Hz to 4 000 Hz. In addition, between these two Bragg band gaps, a locally resonant band gap is induced by resonant shunting circuits. Appropriate circuit parameters are used to join these two Bragg band gaps by the locally resonant band gap.Thus, a low-frequency and broad band gap of 369 Hz to 4 000 Hz is obtained.展开更多
文摘Understanding and predicting the distribution of fractures in the deep tight sandstone reservoir are important for both gas exploration and exploitation activities in Kuqa Depression. We analyzed the characteristics of regional structural evolution and paleotectonic stress setting based on acoustic emission tests and structural feature analysis. Several suites of geomechanical models and experiments were developed to analyze how the geological factors influenced and controlled the development and distribution of fractures during folding. The multilayer model used elasto-plastic finite element method to capture the stress variations and slip along bedding surfaces, and allowed large deformation. The simulated results demonstrate that this novel Quasi-Binary Method coupling composite failure criterion and geomechanical model can effectively quantitatively predict the developed area of fracture parameters in fault-related folds. High-density regions of fractures are mainly located in the fold limbs during initial folding stage, then gradually migrate from forelimb to backlimb, from limbs to hinge, from deep to shallow along with the fold uplift. Among these factors, the fold uplift and slip displacement along fault have the most important influence on distributions of fractures and stress field, meanwhile the lithology and distance to fault have also has certain influences. When the uplift height exceeds approximately 55 percent of the total height of fold the facture density reaches a peak, which conforms to typical top-graben fold type with large amplitude and high-density factures in the top. The overall simulated results match well with core observation and FMI results both in the whole geometry and fracture distribution.
文摘Folds have a significant development in the Cretaceous-Tertiary rock units of the northern part of Bagheran Mountains in southwest Birjand between Lut and Sistan structural zones. The general trends of fold axis and axial surface are E-W and the folds are less exposed by distance from mountain and plain boundary. Geometric and kinematic status investigation of folds (such as f2 fold in the middle part) and faults shows that faulting process has created some of the folds leading to their development. Such structures are described as fault-related folds. Also, analysis of geometry and mechanism of faults indicate that back thrusts have the largest influence on generation and development of folds in this region.
基金supported by the NIH grant7R21 NS09662 7-02 to PFFthe Winston and Maxine Wallin Neuroscience Discovery Fund award CON000000083928 to PFF and AC。
文摘The prion protein(PrP) is the key molecular and pathological mediator of prion diseases,a heterogeneous group of brain disorders with fatal outcomes.Prion diseases are rare but deserve special attention because of their unique familial,sporadic,and transmissible etiologies,all caused by a single agent:misfolded conformations of PrP.
基金supported by the National Natural Science Foundation of China(62276192)。
文摘Spectral compressive imaging has emerged as a powerful technique to collect the 3D spectral information as 2D measurements.The algorithm for restoring the original 3D hyperspectral images(HSIs)from compressive measurements is pivotal in the imaging process.Early approaches painstakingly designed networks to directly map compressive measurements to HSIs,resulting in the lack of interpretability without exploiting the imaging priors.While some recent works have introduced the deep unfolding framework for explainable reconstruction,the performance of these methods is still limited by the weak information transmission between iterative stages.In this paper,we propose a Memory-Augmented deep Unfolding Network,termed MAUN,for explainable and accurate HSI reconstruction.Specifically,MAUN implements a novel CNN scheme to facilitate a better extrapolation step of the fast iterative shrinkage-thresholding algorithm,introducing an extra momentum incorporation step for each iteration to alleviate the information loss.Moreover,to exploit the high correlation of intermediate images from neighboring iterations,we customize a cross-stage transformer(CSFormer)as the deep denoiser to simultaneously capture self-similarity from both in-stage and cross-stage features,which is the first attempt to model the long-distance dependencies between iteration stages.Extensive experiments demonstrate that the proposed MAUN is superior to other state-of-the-art methods both visually and metrically.Our code is publicly available at https://github.com/HuQ1an/MAUN.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174322 to HC and 12204124 to ZG)111 Project(Grant No.B16029)+1 种基金the Graduate Scientific Research Foundation of Wenzhou University(Grant No.3162023003034 to JH)research grant from Wenzhou Institute。
文摘Single-molecule magnetic tweezers(MTs) have revealed multiple transition barriers along the unfolding pathway of several two-state proteins, such as GB1 and Csp. In this study, we utilized MTs to measure the force-dependent folding and unfolding rates of both protein L(PLWT) and its Y47W mutant(PLY47W) where the mutation point is not at the force-bearing β-strands. The measurements were conducted within a force range of 3–120 pN. Notably, the unfolding rates of both PLWT and PWY47W exhibit distinct force sensitivities below 50 pN and above 60 pN, implying a two-barrier free energy landscape. Both PLWT and PLY47W share the same force-dependent folding rate and the same transition barriers,but the unfolding rate of PLY47W is faster than that of PLWT. Our finding demonstrates that the residue outside of the force-bearing region will also affect the force-induced unfolding dynamics.
基金supported by the Key Projects of the 2022 National Defense Science and Technology Foundation Strengthening Plan 173 (Grant No.2022-173ZD-010)the Equipment PreResearch Foundation of The State Key Laboratory (Grant No.6142101200204)。
文摘Wideband spectrum sensing with a high-speed analog-digital converter(ADC) presents a challenge for practical systems.The Nyquist folding receiver(NYFR) is a promising scheme for achieving cost-effective real-time spectrum sensing,which is subject to the complexity of processing the modulated outputs.In this case,a multipath NYFR architecture with a step-sampling rate for the different paths is proposed.The different numbers of digital channels for each path are designed based on the Chinese remainder theorem(CRT).Then,the detectable frequency range is divided into multiple frequency grids,and the Nyquist zone(NZ) of the input can be obtained by sensing these grids.Thus,high-precision parameter estimation is performed by utilizing the NYFR characteristics.Compared with the existing methods,the scheme proposed in this paper overcomes the challenge of NZ estimation,information damage,many computations,low accuracy,and high false alarm probability.Comparative simulation experiments verify the effectiveness of the proposed architecture in this paper.
基金supported by the National Defence Pre-research Foundation of China。
文摘Nyquist Folding Receiver(NYFR)is a perceptron structure that realizes a low probability of intercept(LPI)signal analog to information.Aiming at the problem of LPI radar signal receiving,the time domain,frequency domain,and time-frequency domain problems of signals intercepted by NYFR structure are studied.Combined with the time-frequency analysis(TFA)method,a radar recognition scheme based on deep learning(DL)is introduced,which can reliably classify common LPI radar signals.First,the structure of NYFR and its characteristics in the time domain,frequency domain,and time and frequency domain are analyzed.Then,the received signal is then converted into a time-frequency image(TFI).Finally,four kinds of DL algorithms are used to classify LPI radar signals.Simulation results demonstrate the correctness of the NYFR structure,and the effectiveness of the proposed recognition method is verified by comparison experiments.
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China (IRT_15R29)the Basic Research Innovation Group Project of Gansu Province, China (21JR7RA347)the Natural Science Foundation of Gansu Province, China (20JR10RA231)。
文摘Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy areas. The wind and sand flow in the region is notably bi-directional. To shield railroads from sand, a unique sand fence made of folded linear high-density polyethylene(HDPE) is used, aligning with the principle that the dominant wind direction is perpendicular to the fence. This study employed field observations and numerical simulations to investigate the effectiveness of these HDPE sand fences in altering flow field distribution and offering protection. It also explored how these fences affect the deposition and erosion of sand particles. Findings revealed a significant reduction in wind speed near the fence corner;the minimum horizontal wind speed on the leeward side of the first sand fence(LSF) decreased dramatically from 3 m/s to 0.64 m/s. The vortex area on the LSF markedly impacted horizontal wind speeds. Within the LSF, sand deposition was a primary occurrence. As wind speeds increased, the deposition zone shrank, whereas the positive erosion zone expanded. Close to the folded corners of the HDPE sand fence, there was a notable shift from the positive erosion zone to a deposition zone. Field tests and numerical simulations confirmed the high windproof efficiency(WE) and sand resistance efficiency(SE) in the HDPE sand fence. Folded linear HDPE sheet sand fence can effectively slow down the incoming flow and reduce the sand content, thus achieving good wind and sand protection. This study provides essential theoretical guidance for the design and improvement of wind and sand protection systems in railroad engineering.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11305139 and 11974173)the HPC Center of Nanjing University。
文摘Protein folding in crowding cellular environment often relies on the assistance of various chaperones. Hsp70 is one of the most ubiquitous chaperones in cells. Previous studies showed that the chaperone–client interactions at the open state tend to remodel the protein folding energy landscape and direct the protein folding as a foldase. In this work, we further investigate how the chaperone–client interaction strength modulates the foldase function of Hsp70 by using molecular simulations. The results showed that the time of substrate folding(including the whole folding step and substrate release step) has a non-monotonic dependence on the interaction strength. With the increasing of the chaperone–client interaction strength, the folding time decreases first, and then increases. More detailed analysis showed that when the chaperone–client interaction is too strong, even small number of chaperones–client contacts can maintain the substrate bound with the chaperone. The sampling of the transient chaperones–client complex with sparse inter-molecule contacts makes the client protein have chance to access the misfolded state even it is bound with chaperone. The current results suggest that the interaction strength is an important factor controlling the Hsp70 chaperoning function.
基金funded by the National Natural Science Foundation of China(41872232)the Beijing Geological Survey Project(PXM 2016-158203-000008,PXM 2018-158203-000014)the Beijing Innovation Studio(Urban Geology,Active Structure,and Monitoring).
文摘The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thrust belt(YFTB).However,there is still debate regarding the tectonic evolutionary history of the YFTB during the late Permian to Triassic period,specifically regarding the timing of subduction and collision between the NCC and the Paleo-Asian Ocean.The Nianzi granite unit exhibits unique petrological,geochronological and geochemical signatures that shed light on the tectonic evolutionary history of the YFTB.This study presents detailed petrology,whole-rock geochemistry,together with Sr-Nd isotopic,zircon U-Pb dating and Lu-Hf isotopic data of the granites within the Nianzi granite unit.Our findings demonstrate that the granites primarily consist of subhedral K-feldspar,plagioclase,quartz,minor biotite and hornblende,with accessory titanite,apatite,magnetite and zircon.Zircon U-Pb dating indicates that the Xiaolianghou granite was emplaced at 247.5±0.62 Ma.Additionally,the adakitic characteristics of the Nianzi,Xiawopu and Xiaolianghou granitic intrusions,such as high Sr and Ba contents and high ratios of Sr/Y and(La/Yb)N,combined with negative Sr-Nd and Lu-Hf isotopes(87Sr/86Sr)i=0.705681–0.7057433,εNd(t)=−21.98 to−20.97,zirconεHf(t)=−20.26 to−9.92,as well as the I-type granite features of high SiO_(2),Na_(2)O and K_(2)O/Na_(2)O ratios,enriched Rb,K,Sr and Ba,along with depleted Th,U,Nb,Ta,P and Ti,suggest that the Nianzi granitic unit was mainly derived from the partial melting of a thickened lower crust containing hydrous,calc-alkaline to high-K calc-alkaline,mafic to intermediate metamorphic rocks.In light of these parameters,we further integrate our data with previous studies and conclude that the Nianzi granitic unit was generated in a post-collisional extensional environment during the Early Triassic.
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China(IRT_15R29)the Basic Research Innovation Group Project of Gansu Province,China(21JR7RA347)the Natural Science Foundation of Gansu Province,China(20JR10RA231)。
文摘The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.
基金Supported by Medical and Health Science and Technology Project of Hangzhou,No.B20230855Hangzhou Science and Technology Plan Development Project,No.20210133X01.
文摘BACKGROUND Nasolabial fold(NLF)depression can affect the facial appearance of patients to some extent and increase their psychological burdens.In recent years,autologous fat grafting(AFG)combined with botulinum toxin A(BTX-A)injection(AFG+BTX-A injection)has been gradually applied in the treatment of patients with NLF depression.Although studies have been conducted on the efficacy and safety of AFG+BTX-A injection in treating NLF depression,the experimental design,observational indicators,and sample enrollment criteria vary remarkably,making it difficult to draw convincing and consistent conclusions.Thus,further relevant research is warranted.AIM To assess the esthetic improvement,efficacy,and safety of AFG+BTX-A injections in patients with NLF depression.METHODS This study included 60 patients with NLF depression who were treated in our hospital from February 2019 to April 2021.These patients were categorized into control(n=30)and observation(n=30)groups.The observation group received AFG+BTX-A injection,whereas the control group underwent AFG only.All patients were evaluated using the wrinkle severity rating scale(WSRS)and global aesthetic improvement scale.The compactness of facial contours,skin evaluation indexes,adverse reactions,and satisfaction of the two groups were evaluated 3 months postoperatively.RESULTS The WSRS scores of the observation group at 1,3,and 6 months postoperatively were lower than those of the control group(P<0.05).Three months postoperatively,facial fine lines and pores showed obvious improvement and the skin index score was higher in the observation group than in the control group(P<0.05).The compactness of facial contours was better in the observation group than in the control group(P<0.05).In addition,no remarkable differences were noted in the incidence of postoperative adverse reactions such as facial stiffness,facial asymmetry,facial bruising,and facial concavity inequality(P>0.05).CONCLUSION AFG+BTX-A injection is a highly safe,cost-effective,effective,and long-lasting treatment for NLF depression with high esthetic value,which should be promoted in the future.
文摘A CMOS folding and interpolating analog-to-digital converter (ADC) for embedded application is described.The circuit is fully compatible with standard digital CMOS technology.A modified folding block implemented without resistor contributes to a small chip area.At the input stage,offset averaging reduces the input capacitance and the distributed track-and-hold circuits are proposed to improve signal-to-noise-plus-distortion ratio.The 200Ms/s 8bit ADC with 177mW total power consumption at 3.3V power supply is realized in standard digital 0.18μm 3.3V CMOS technology.
基金supported by the Korea Science and Engineering Foundation Grant(National Research Laboratory Program,R0A-2007-000-200012-0)the Korea Research Foundation(KRF-006-005-J03301)partially supported by the 2009 KU Brain Pool of Konkuk University
文摘In an attempt to realize a flapping wing micro-air vehicle with morphing wings, we report on improvements to our previousfoldable artificial hind wing.Multiple hinges, which were implemented to mimic the bending zone of a beetle hind wing, weremade of small composite hinge plates and tiny aluminum rivets.The buck-tails of rivets were flared after the hinge plates wereassembled with the rivets so that the folding/unfolding motions could be completed in less time, and the straight shape of theartificial hind wing could be maintained after fabrication.Folding and unfolding actions were triggered by electrically-activatedShape Memory Alloy (SMA) wires.For wing folding, the actuation characteristics of the SMA wire actuator were modifiedthrough heat treatment.Through a series of flapping tests, we confirmed that the artificial wings did not fold back and arbitrarilyfluctuate during the flapping motion.
基金funded by the Science and Technology Research and Development Program of China Petroleum and Chemical Corporation(No.P06088)Nonprofit Special Research Program(No.200811015)the Land Resource Survey Project of the Ministry of Land and Natural Resources,China(No.1212010782003).
文摘A serial of"comb-like and trough-like"folds developed in eastern Sichuan,controlled by the multi-layer detachment folding,is different from the classical Jura-type structure in their development.The key factor resulting in the development of these structures is the occurrence of detachment layers in different parts of Neoprotozoic to Mesozoic stratigraphy of study area,which, from the bottom to the top,are the lower part of Banxi Group,Lower Cambrian(Niutitang Formation),Lower Silurian(Longmaxi Formation and Luoreping Formation),Upper Permian (Wujiaping Formation) and Lower Triassic(Daye Formation).On the basis of field survey combined with sand-box modeling,this study argued that the detachment layer of the lower part of Banxi Group controlled the development of the"comb-like"folds,and the lower part of Cambrian detachment layer controlled the development of"trough-like"folds.Because of several detachment layers occurring in the study area,the development of duplex structures different scales is an important deformation mechanism,and the duplexes are the important structures distinguished from the typical detachment folding structures.Due to these duplexes,the surface structures and structural highs may not be the structural highs in the depth.Meanwhile,the detachment layers are good channels for oil/ gas migration benefiting the understanding of accumulation and migration of oil and gas.
基金supported by National Natural Science Foundation ofChina(Grant No.50935002)
文摘The thin-walled tube flexure(TWTF) hinges have important potential application value in the deployment mechanisms of satellite and solar array, but the optimal design of the TWTF hinges haven't been completely solved, which restricts their applications. An optimal design method for the qusai-static folding and deploying of TWTF hinges with double slots is presented based on the response surface theory. Firstly, the full factorial method is employed to design of the experiments. Then, the finite element models of the TWTF hinges with double slots are constructed to simulate the qusai-static folding and deploying non-linear analysis. What's more, the mathematical model of the TWTF flexure hinge quasi-static folding and deploying properties are derived by the response surface method. Considering of small mass and high stability, the peak moment of quasi-static folding and deploying as well as the lightless are set as the objectives to get the optimal performances. The relative errors of the objectives between the optimal design results and the FE analysis results are less than 7%, which demonstrates the precision of the surrogate models. Lastly, the parameter study shows that both the slots length and the slots width both have significant effects to the peak moment of quasi-static folding and deploying of TWTF hinges with double slots. However, the maximum Mises stress of quasi-static folding is more sensitive to the slots length than the slots width. The proposed research can be applied to optimize other thin-walled flexure hinges under quasi-static folding and deploying, which is of great importance to design of flexure hinges with high stability and low stress.
基金supported by the start-up grant from“Top 100 Talents Program”of Sun Yat-sen University to JRY(50000-31131114)General Program of National Natural Science Foundation of China to JRY(31671320)
文摘Currently many facets of genetic information are illdefined. In particular, how protein folding is genetically regulated has been a long-standing issue for genetics and protein biology. And a generic mechanistic model with supports of genomic data is still lacking. Recent technological advances have enabled much needed genome-wide experiments. While putting the effect of codon optimality on debate, these studies have supplied mounting evidence suggesting a role of m RNA structure in the regulation of protein folding by modulating translational elongation rate. In conjunctions with previous theories, this mechanistic model of protein folding guided by m RNA structure shall expand our understandings of genetic information and offer new insights into various biomedical puzzles.
基金Project supported by the National Natural Science Foundation of China(Nos.11272126,51435006,and 51121002)the Fundamental Research Funds for the Central Universities(Nos.HUST:2016JCTD114 and HUST:2015TS121)
文摘A folding beam-type piezoelectric phononic crystal model is proposed to isolate vibration. Two piezoelectric bimorphs are joined by two masses as a folding structure to comprise each unit cell of the piezoelectric phononic crystal. Each bimorph is connected independently by a resistive-inductive resonant shunting circuit. The folding structure extends the propagation path of elastic waves, while its structure size remains quite small. Propagation of coupled extension-flexural elastic waves is studied by the classical laminated beam theory and transfer matrix method. The theoretical model is further verified with the finite element method(FEM). The effects of geometrical and circuit parameters on the band gaps are analyzed. With only 4 unit cells, the folding beam-type piezoelectric phononic crystal generates two Bragg band gaps of 369 Hz to1 687 Hz and 2 127 Hz to 4 000 Hz. In addition, between these two Bragg band gaps, a locally resonant band gap is induced by resonant shunting circuits. Appropriate circuit parameters are used to join these two Bragg band gaps by the locally resonant band gap.Thus, a low-frequency and broad band gap of 369 Hz to 4 000 Hz is obtained.