The inefficient separation of photogenerated carriers has become a serious problem that limits the photoelectrochemical(PEC)performance of semiconductors.Herein,a sol-gel method was used to prepare BiFeO_(3) ferroelec...The inefficient separation of photogenerated carriers has become a serious problem that limits the photoelectrochemical(PEC)performance of semiconductors.Herein,a sol-gel method was used to prepare BiFeO_(3) ferroelectric thin films with FTO and FTO/Au as substrates,respectively.The polarization electric field of the ferroelectric can more effectively separate the carriers generated in the photoelectrode.Meanwhile,the introduction of an Au buffer layer can reduce the resistance in the process of charge transfer,accelerate the carrier migration,and enhance the efficiency of the charge separation.Under light irradiation,Au/BiFeO_(3) photoelectrode exhibited an extraordinary improvement in PEC water splitting compared with BiFeO_(3).In addition,the ferroelectric polarization electric field causes band bending,which further accelerates the separation of electrons and holes and improves the PEC performance of the photoelectrode.This work promotes the effective application of ferroelectric films in PEC water splitting.展开更多
An improved transverse Ising model is proposed by taking the depolarization field effect into account. Within the framework of mean-held theory we investigate the behavior of the ferroelectric thin film. Our results s...An improved transverse Ising model is proposed by taking the depolarization field effect into account. Within the framework of mean-held theory we investigate the behavior of the ferroelectric thin film. Our results show that the influence of the depolarization field is to flatten the spontaneous polarization profile and make the films more homogeneous, which is consistent with Ginzburg Landau theory. This fact shows that this model can be taken as an effective model to deal with the ferroelectric film and can be further extended to refer to quantum effect. The competition between quantum effect and depolarization field induces some interesting phenomena on ferroelectric thin films.展开更多
Ferroelectric materials have many interesting physical properties such as ferroelectricity, pyroelectricity, piezoelectricity, and opto-electricity, and applying ferroelectric materials in the forms of thin and thick ...Ferroelectric materials have many interesting physical properties such as ferroelectricity, pyroelectricity, piezoelectricity, and opto-electricity, and applying ferroelectric materials in the forms of thin and thick films and integrating them on the silicon substrate as electronic and MEMS devices is a very attractive research area and challenging. In this paper, we report our research works on ferroelectric MEMS and ferroelectric films for electronic device applications. Pyroelectric thin film infrared sensors have been made, characterized, and a 32×32 array with its size of 1cm×1cm has been obtained on Si membrane. Ferroelectric thin films in amorphous phase have been applied to make silicon based hydrogen gas sensors with the metal/amorphous ferroelectric film/metal device structure, and its turn-on voltage of about 4.5V at ~1000 ppm in air is about 7 times of the best value reported in the literature. For the application of electron emission flat panel display, ferroelectric BST thin films with excess Ti concentrations have been coated on Si tips, the threshold voltage of those ferroelectric film coated tips has been reduced about one order from ~70 V/μm to 4~10 V/μm for different Ti concentrations, and however, the electron emission current density has been increased at least 3~4 order for those coated tips compared to that of the bare Si tips. To fulfill in the thickness gap between thin film of typical ~1 μm made by PVD/CVD and polished ceramic wafer of ~50 μm from the bulk, piezoelectric films with thickness in a range of 1~30 μm have been successfully deposited on Si substrate at a low temperature of 650oC by a novel hybridized deposition technique, and piezoelectric MEMS ultrasonic arrays have been very recently obtained with the sound pressure level up to ~120 dB. More detailed results will be presented and mechanisms will be discussed.展开更多
Hafnia-based ferroelectric materials, like Hf_(0.5)Zr_(0.5)O_(2)(HZO), have received tremendous attention owing to their potentials for building ultra-thin ferroelectric devices. The orthorhombic(O)-phase of HZO is fe...Hafnia-based ferroelectric materials, like Hf_(0.5)Zr_(0.5)O_(2)(HZO), have received tremendous attention owing to their potentials for building ultra-thin ferroelectric devices. The orthorhombic(O)-phase of HZO is ferroelectric but metastable in its bulk form under ambient conditions, which poses a considerable challenge to maintaining the operation performance of HZO-based ferroelectric devices. Here, we theoretically addressed this issue that provides parameter spaces for stabilizing the O-phase of HZO thin-films under various conditions. Three mechanisms were found to be capable of lowering the relative energy of the O-phase, namely, more significant surface-bulk portion of(111) surfaces, compressive c-axis strain,and positive electric fields. Considering these mechanisms, we plotted two ternary phase diagrams for HZO thin-films where the strain was applied along the in-plane uniaxial and biaxial, respectively. These diagrams indicate the O-phase could be stabilized by solely shrinking the film-thickness below 12.26 nm, ascribed to its lower surface energies. All these results shed considerable light on designing more robust and higher-performance ferroelectric devices.展开更多
BiFeO_(3)(BFO)has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polariza-tion.However,BFO suffers from a large leakage current,resulting in poor ferroelectric p...BiFeO_(3)(BFO)has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polariza-tion.However,BFO suffers from a large leakage current,resulting in poor ferroelectric properties.Herein,the sol-gel method was used to deposit a series of BFO-based thin films on fluorine-doped tin oxide substrates,and the effects of the substitution of the elements Co,Cu,Mn(B-site)and Sm,Eu,La(A-site)on the crystal structure,ferroelectricity,and leakage current of the BFO-based thin films were invest-igated.Results confirmed that lattice distortion by X-ray diffraction can be attributed to the substitution of individual elements in the BFO-based films.Sm and Eu substitutions contribute to the lattice distortion in a pseudo-cubic structure,while La is biased toward pseudo-tet-ragonal.Piezoelectric force microscopy confirmed that reversible switching of ferroelectric domains by nearly 180°can be realized through the prepared films.The ferroelectric hysteresis loops showed that the order for the polarization contribution is as follows:Cu>Co>Mn(B-site),Sm>La>Eu(A-site).The current density voltage curves indicated that the order for leakage contribution is as follows:Mn<Cu<Co(B-site),La<Eu<Sm(A-site).Scanning electron microscopy showed that the introduction of Cu elements facilitates the formation of dense grains,and the grain size distribution statistics proved that La element promotes the reduction of grain size,leading to the increase of grain boundaries and the reduction of leakage.Finally,a Bi_(0.985)Sm_(0.045)La_(0.03)Fe_(0.96)Co_(0.02)Cu_(0.02)O_(3)(SmLa-CoCu)thin film with a qualitative leap in the remnant polarization from 25.5(Bi_(0.985)Sm_(0.075)FeO_(3))to 98.8µC/cm^(2)(SmLa-CoCu)was prepared through the syner-gistic action of Sm,La,Co,and Cu elements.The leakage current is also drastically reduced from 160 to 8.4 mA/cm^(2)at a field strength of 150 kV/cm.Thus,based on the increasing entropy strategy of chemical engineering,this study focuses on enhancing ferroelectricity and decreasing leakage current,providing a promising path for the advancement of ferroelectric devices.展开更多
Bi3.25La0.75Ti3O12(BLT)thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate th...Bi3.25La0.75Ti3O12(BLT)thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate that the BLT films annealed at different temperatures are randomly orientated and the single perovskite phase is obtained at 550℃.The remmant polarization increnses and the coercive field decreases with the annealing temperature increasing.The leakage current density of the BLT films annealed at 700℃ is about 5.8×10^-8A/cm^2 at the electrie field of 250kv/cm.展开更多
The effects of internal stresses and depolarization fields on the properties of epitaxial ferroelectric perovskite thin films are discussed by employing the dynamic Ginzbur~Landau equation (DCLE). The numerical solu...The effects of internal stresses and depolarization fields on the properties of epitaxial ferroelectric perovskite thin films are discussed by employing the dynamic Ginzbur~Landau equation (DCLE). The numerical solution for BaTiO3 film shows that internal stress and the depolarization field have the most effects on ferroelectric properties such as polarization, Curie temperature and susceptibility. With the increase of the thickness of the film, the polarization of epitaxia] ferroelectric thin film is enhanced rapidly under high internal compressively stress. With the thickness exceeding the critical thickness for dislocation formation, the polarization increases slowly and even weakens due to relaxed internal stresses and a weak electrical boundary condition. This indicates that the effects of mechanical and electrical boundary conditions both diminish for ferroelectric thick films. Consequently, our thermodynamic method is a full scale model that can predict the properties of ferroelectric perovskite films in a wide range of film thickness.展开更多
Ferroelectric domain switching under low voltage or short pulses is of interest for the development of high-density random access memory (FRAM) devices. Being necessarily very small in size, instability and back swi...Ferroelectric domain switching under low voltage or short pulses is of interest for the development of high-density random access memory (FRAM) devices. Being necessarily very small in size, instability and back switching often occur when the external voltage is removed, which creates serious problems. In this investigation, a general approach to determine the minimum size of ferroelectric domain to avoid back switching was developed, and as an example, a 180° domain in a ferroelectric thin film covered by the upper and lower electrodes was considered in detail. We note that our approach is generally applicable to many other fields, including phase transformation, nucleation and expansion of dislocation loops in thin films, etc.展开更多
Fatigue-free Bi3.2La0.8Ti3O12 ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were st...Fatigue-free Bi3.2La0.8Ti3O12 ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were studied under different processing conditions using XRD. Experimental results indicate that increase in annealing time at 700 ℃ after preannealing for 10 min at 400 ℃ can remarkably increase (200)-orientation of the films derived from the precursor solutions with two contents of citric acid. Meanwhile, high content of citric acid increases the film thickness and is conducive to the α-orientation of the films with the preannealing, and low concentration of the solution is conducive to the c-orientation of the films without the preannealing.展开更多
The size effects of the critical behaviors for the systems of interacting spins are discussed extensively inliterature.In this paper,the finite-size dependence of the critical temperature and susceptibility of the fer...The size effects of the critical behaviors for the systems of interacting spins are discussed extensively inliterature.In this paper,the finite-size dependence of the critical temperature and susceptibility of the ferroelectric thinfilm are investigated numerically based on the four-state Potts model with the nearest-neighbor interactions between thedipole moments.The four orientations of the domains exist in the ferroelectric film and the movement of the domainwalls determines the polarization switching process besides the boundary conditions of the film.The critical exponentsare obtained and our investigations show that the boundary conditions play the important roles for the ferroelectricproperties of the thin films and the critical behavior of the thin films strongly depends on the feature of the surface.展开更多
By taking into account structural transition zones near the lateral and thickness direction edges,this paper uses a modified transverse Ising model to study dielectric properties of a finite size ferroelectric thin fi...By taking into account structural transition zones near the lateral and thickness direction edges,this paper uses a modified transverse Ising model to study dielectric properties of a finite size ferroelectric thin film in the framework of the mean-field approximation.The results indicate that the influence of the lateral size on the dielectric susceptibility cannot be neglected and lateral structural transition zones could be a crucial factor that improves the mean susceptibility of the fixed size film.展开更多
Many distinguished properties of epitaxial ferroelectric thin films can be tunable through the misfit strain.The strain tunability of ferroelectric and dielectric properties in epitaxial lead titanate ultrathin films ...Many distinguished properties of epitaxial ferroelectric thin films can be tunable through the misfit strain.The strain tunability of ferroelectric and dielectric properties in epitaxial lead titanate ultrathin films is numerically investigated by using a phase field model,in which the surface effect of polarization is taken into account.The response of polarization to the applied electric field in the thickness direction is examined with different misfit strains at room temperature.It is found that a compressive misfit strain increases the coercive field and the remanent polarization while a tensile misfit strain decreases both of them.The nonlinear dielectric constants of the thin films with tensile misfit strains are much larger than those of the thin films without misfit strains,which are attributed to the existence of the a/c/a/c multiple domains in the thin films under tensile misfit strains.展开更多
In the present work,the comparative study of the electric response of Sn_(2)P_(2)S_(6) films to the visible light action was carried out without and under external electric field.The light flux modulated by a chopper ...In the present work,the comparative study of the electric response of Sn_(2)P_(2)S_(6) films to the visible light action was carried out without and under external electric field.The light flux modulated by a chopper induces the integral response comprising time-dependent photoelectric and photovoltaic components.It was shown that spontaneous polarization influences the electric response characteristics.展开更多
Polycrystalline Bi_4Ti_3O_(12) thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/Si O_2/Si substrates by laser-ablation under different kinetic growth condit...Polycrystalline Bi_4Ti_3O_(12) thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/Si O_2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and ferroelectric property of the films was investigated, so as to explore the possibility of enhancing ferroelectric polarization by controlling the preferred orientation. The structural characterization indicated that the large growth rate and high oxygen background pressure were both favorable for the growth of non-c-axis oriented grains in the Bi_4Ti_3O_(12) thin films. The films with high fractions of a-axis and random orientations, i e, f(a-sxis) = 28.3% and f(random) = 69.6%, could be obtained at the deposition temperature of 973 K, oxygen partial pressure of 15 Pa and laser fluence of 4.6 J/cm^2, respectively. It was also noted that the variation of ferroelectric polarization was in accordance with the evolution non-c-axis orientation. A large value of remanent polarization(2 Pr = 35.5 μC/cm^2) was obtained for the Bi_4Ti_3O_(12) thin films with significant non-c-axis orientation, even higher than that of rare-earth-doped Bi_4Ti_3O_(12) films.展开更多
Properties of ferroelectric xBiInO3-(1-x)PbTiO3(xBI-(1-x)PT) thin films deposited on(101) SrRuO3/(200)Pt/(200) MgO substrates by rf magnetron sputtering method and effects of deposition conditions are inve...Properties of ferroelectric xBiInO3-(1-x)PbTiO3(xBI-(1-x)PT) thin films deposited on(101) SrRuO3/(200)Pt/(200) MgO substrates by rf magnetron sputtering method and effects of deposition conditions are investigated.The structures of the xBI-(1-x)PT films are characterized by x-ray diffraction and scanning electron microscopy.The results indicate that the thin films are grown with mainly(001) orientation. The chemical compositions of the films are analyzed by scanning electron probe and the results indicate that the loss phenomena of Pb and Bi elements depend on the pressure and temperature during the sputtering process.The sputtering parameters including target composition, substrate temperature, and gas pressure are adjusted to obtain optimum sputtering conditions. To decrease leakage currents,2 mol% La2 O3 is doped in the targets. The P-E hysteresis loops show that the optimized xBI-(1-x)PT(x = 0.24) film has high ferroelectricities with remnant polarization2 Pr = 80μC/cm2 and coercive electric field 2 EC = 300 kV/cm. The Curie temperature is about 640℃. The results show that the films have optimum performance and will have wide applications.展开更多
Polycrystalline ferroelectric Bi3.25La0.75Ti3O12 thin films are prepared on Pt/Ti/SiO2/Si substrates by the conventional metalorganic decomposition method. It is observed that with the increase of switching pulse widt...Polycrystalline ferroelectric Bi3.25La0.75Ti3O12 thin films are prepared on Pt/Ti/SiO2/Si substrates by the conventional metalorganic decomposition method. It is observed that with the increase of switching pulse width, the remnant polarisation and the coercive field increase. A wider switching pulse can result in poorer fatigue properties, which comes from more charged defects diffusing to and being trapped on domain walls. On the other hand, when the compressive stress is applied to films, the fatigue properties can be improved. This phenomenon is due to the reorientation of domains under stress.展开更多
PZT(Zr/Ti=52/48) ferroelectric films are prepared by a new modified Sol-Gel method from three stable-separated Pb2+, Zr4+, Ti4+ precursor–monomers. This method needs no distillation and has the advantage of easy chan...PZT(Zr/Ti=52/48) ferroelectric films are prepared by a new modified Sol-Gel method from three stable-separated Pb2+, Zr4+, Ti4+ precursor–monomers. This method needs no distillation and has the advantage of easy change of the Pb2+/Zr4+/Ti4+ stoichiometric. In the paper we also investigate PT seeds influence on ferroelectric properties, crystallographic structures and surface morphologies, and find the bottom/up PT seeds structure prompte PZT crystallization and have superior ferroeletric properties. The paper introduce a method to deduce and calculate lattice constant α by ‘least square method’, then the more accurate lattice constant a0 can be got from X-ray diffractometer (XRD) analysis data. We also discover that grain sizes of PZT film calculated from XRD data are much closed to those of AFM, and the film a0 is relatively small due to crushing stress.展开更多
Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usuall...Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usually deposited from solution, during which phase separation oc- curred, resulting in discrete semiconducting phase whose electrical property was modulated by surrounding ferroelectric phase. However, phase separation resulted in rough surface and thus large leakage current. To further improve electrical properties of such blend films, poly(methyl metacrylate) (PMMA) was introduced as additive into P3HT/P(VDF-TrFE) semiconducting/ferroelectric blend films in this work. It indicated that small amount of PMMA addition could effectively enhance the electrical stability to both large electrical stress and electrical fatigue and further improve retention performance. Overmuch PMMA addition tended to result in the loss of resistive switching property. A model on the configuration of three components was also put forward to well understand our experimental observations.展开更多
基金This work was supported by National Natural Science Foundation of China(Grant No.51702130)the Innovation/Entrepreneurship Program of Jiangsu Province and the project of Zhenjiang Key Laboratory of Advanced Sensing Materials and Devices(No.SS2018001)。
文摘The inefficient separation of photogenerated carriers has become a serious problem that limits the photoelectrochemical(PEC)performance of semiconductors.Herein,a sol-gel method was used to prepare BiFeO_(3) ferroelectric thin films with FTO and FTO/Au as substrates,respectively.The polarization electric field of the ferroelectric can more effectively separate the carriers generated in the photoelectrode.Meanwhile,the introduction of an Au buffer layer can reduce the resistance in the process of charge transfer,accelerate the carrier migration,and enhance the efficiency of the charge separation.Under light irradiation,Au/BiFeO_(3) photoelectrode exhibited an extraordinary improvement in PEC water splitting compared with BiFeO_(3).In addition,the ferroelectric polarization electric field causes band bending,which further accelerates the separation of electrons and holes and improves the PEC performance of the photoelectrode.This work promotes the effective application of ferroelectric films in PEC water splitting.
文摘An improved transverse Ising model is proposed by taking the depolarization field effect into account. Within the framework of mean-held theory we investigate the behavior of the ferroelectric thin film. Our results show that the influence of the depolarization field is to flatten the spontaneous polarization profile and make the films more homogeneous, which is consistent with Ginzburg Landau theory. This fact shows that this model can be taken as an effective model to deal with the ferroelectric film and can be further extended to refer to quantum effect. The competition between quantum effect and depolarization field induces some interesting phenomena on ferroelectric thin films.
文摘Ferroelectric materials have many interesting physical properties such as ferroelectricity, pyroelectricity, piezoelectricity, and opto-electricity, and applying ferroelectric materials in the forms of thin and thick films and integrating them on the silicon substrate as electronic and MEMS devices is a very attractive research area and challenging. In this paper, we report our research works on ferroelectric MEMS and ferroelectric films for electronic device applications. Pyroelectric thin film infrared sensors have been made, characterized, and a 32×32 array with its size of 1cm×1cm has been obtained on Si membrane. Ferroelectric thin films in amorphous phase have been applied to make silicon based hydrogen gas sensors with the metal/amorphous ferroelectric film/metal device structure, and its turn-on voltage of about 4.5V at ~1000 ppm in air is about 7 times of the best value reported in the literature. For the application of electron emission flat panel display, ferroelectric BST thin films with excess Ti concentrations have been coated on Si tips, the threshold voltage of those ferroelectric film coated tips has been reduced about one order from ~70 V/μm to 4~10 V/μm for different Ti concentrations, and however, the electron emission current density has been increased at least 3~4 order for those coated tips compared to that of the bare Si tips. To fulfill in the thickness gap between thin film of typical ~1 μm made by PVD/CVD and polished ceramic wafer of ~50 μm from the bulk, piezoelectric films with thickness in a range of 1~30 μm have been successfully deposited on Si substrate at a low temperature of 650oC by a novel hybridized deposition technique, and piezoelectric MEMS ultrasonic arrays have been very recently obtained with the sound pressure level up to ~120 dB. More detailed results will be presented and mechanisms will be discussed.
基金Project supported by the Fund from the Ministry of Science and Technology(MOST)of China(Grant No.2018YFE0202700)the National Natural Science Foundation of China(Grant Nos.11974422 and 12104504)+2 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB30000000)the Fundamental Research Funds for the Central Universitiesthe Research Funds of Renmin University of China(Grant No.22XNKJ30)。
文摘Hafnia-based ferroelectric materials, like Hf_(0.5)Zr_(0.5)O_(2)(HZO), have received tremendous attention owing to their potentials for building ultra-thin ferroelectric devices. The orthorhombic(O)-phase of HZO is ferroelectric but metastable in its bulk form under ambient conditions, which poses a considerable challenge to maintaining the operation performance of HZO-based ferroelectric devices. Here, we theoretically addressed this issue that provides parameter spaces for stabilizing the O-phase of HZO thin-films under various conditions. Three mechanisms were found to be capable of lowering the relative energy of the O-phase, namely, more significant surface-bulk portion of(111) surfaces, compressive c-axis strain,and positive electric fields. Considering these mechanisms, we plotted two ternary phase diagrams for HZO thin-films where the strain was applied along the in-plane uniaxial and biaxial, respectively. These diagrams indicate the O-phase could be stabilized by solely shrinking the film-thickness below 12.26 nm, ascribed to its lower surface energies. All these results shed considerable light on designing more robust and higher-performance ferroelectric devices.
基金supported by the National Natural Science Foundation of China(No.22371013)the National Key Research and Development Program of China(No.2018YFA0703700)+3 种基金the Fundamental Research Funds for the Central Universities,China(Nos.FRF-IDRY-19-007 and FRF-TP-19-055A2Z)the National Program for Support of Top-notch Young Professionals,Chinathe Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(CAST),China(No.2019-2021 QNRC)the“Xiaomi Young Scholar”Funding Project,China.
文摘BiFeO_(3)(BFO)has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polariza-tion.However,BFO suffers from a large leakage current,resulting in poor ferroelectric properties.Herein,the sol-gel method was used to deposit a series of BFO-based thin films on fluorine-doped tin oxide substrates,and the effects of the substitution of the elements Co,Cu,Mn(B-site)and Sm,Eu,La(A-site)on the crystal structure,ferroelectricity,and leakage current of the BFO-based thin films were invest-igated.Results confirmed that lattice distortion by X-ray diffraction can be attributed to the substitution of individual elements in the BFO-based films.Sm and Eu substitutions contribute to the lattice distortion in a pseudo-cubic structure,while La is biased toward pseudo-tet-ragonal.Piezoelectric force microscopy confirmed that reversible switching of ferroelectric domains by nearly 180°can be realized through the prepared films.The ferroelectric hysteresis loops showed that the order for the polarization contribution is as follows:Cu>Co>Mn(B-site),Sm>La>Eu(A-site).The current density voltage curves indicated that the order for leakage contribution is as follows:Mn<Cu<Co(B-site),La<Eu<Sm(A-site).Scanning electron microscopy showed that the introduction of Cu elements facilitates the formation of dense grains,and the grain size distribution statistics proved that La element promotes the reduction of grain size,leading to the increase of grain boundaries and the reduction of leakage.Finally,a Bi_(0.985)Sm_(0.045)La_(0.03)Fe_(0.96)Co_(0.02)Cu_(0.02)O_(3)(SmLa-CoCu)thin film with a qualitative leap in the remnant polarization from 25.5(Bi_(0.985)Sm_(0.075)FeO_(3))to 98.8µC/cm^(2)(SmLa-CoCu)was prepared through the syner-gistic action of Sm,La,Co,and Cu elements.The leakage current is also drastically reduced from 160 to 8.4 mA/cm^(2)at a field strength of 150 kV/cm.Thus,based on the increasing entropy strategy of chemical engineering,this study focuses on enhancing ferroelectricity and decreasing leakage current,providing a promising path for the advancement of ferroelectric devices.
文摘Bi3.25La0.75Ti3O12(BLT)thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate that the BLT films annealed at different temperatures are randomly orientated and the single perovskite phase is obtained at 550℃.The remmant polarization increnses and the coercive field decreases with the annealing temperature increasing.The leakage current density of the BLT films annealed at 700℃ is about 5.8×10^-8A/cm^2 at the electrie field of 250kv/cm.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10802070, 10972188, and 10902055), Natural Science Foundation of Fujian Province of China (Grant No. 2011J01329), and the Fundamental Research Funds for the Central Universities of China (Grant No. 2011121002).
文摘The effects of internal stresses and depolarization fields on the properties of epitaxial ferroelectric perovskite thin films are discussed by employing the dynamic Ginzbur~Landau equation (DCLE). The numerical solution for BaTiO3 film shows that internal stress and the depolarization field have the most effects on ferroelectric properties such as polarization, Curie temperature and susceptibility. With the increase of the thickness of the film, the polarization of epitaxia] ferroelectric thin film is enhanced rapidly under high internal compressively stress. With the thickness exceeding the critical thickness for dislocation formation, the polarization increases slowly and even weakens due to relaxed internal stresses and a weak electrical boundary condition. This indicates that the effects of mechanical and electrical boundary conditions both diminish for ferroelectric thick films. Consequently, our thermodynamic method is a full scale model that can predict the properties of ferroelectric perovskite films in a wide range of film thickness.
基金Project supported by the National Natural Science Foundation of China (Nos.50232030, 10172030 and 10572155)
文摘Ferroelectric domain switching under low voltage or short pulses is of interest for the development of high-density random access memory (FRAM) devices. Being necessarily very small in size, instability and back switching often occur when the external voltage is removed, which creates serious problems. In this investigation, a general approach to determine the minimum size of ferroelectric domain to avoid back switching was developed, and as an example, a 180° domain in a ferroelectric thin film covered by the upper and lower electrodes was considered in detail. We note that our approach is generally applicable to many other fields, including phase transformation, nucleation and expansion of dislocation loops in thin films, etc.
文摘Fatigue-free Bi3.2La0.8Ti3O12 ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were studied under different processing conditions using XRD. Experimental results indicate that increase in annealing time at 700 ℃ after preannealing for 10 min at 400 ℃ can remarkably increase (200)-orientation of the films derived from the precursor solutions with two contents of citric acid. Meanwhile, high content of citric acid increases the film thickness and is conducive to the α-orientation of the films with the preannealing, and low concentration of the solution is conducive to the c-orientation of the films without the preannealing.
基金the Center for Smart Materials of The Hong Kong Polytechnic University the Earmarked Research Grant(Account No.B-Q 363)allocated by the Hong Kong Research Grants Council
文摘The size effects of the critical behaviors for the systems of interacting spins are discussed extensively inliterature.In this paper,the finite-size dependence of the critical temperature and susceptibility of the ferroelectric thinfilm are investigated numerically based on the four-state Potts model with the nearest-neighbor interactions between thedipole moments.The four orientations of the domains exist in the ferroelectric film and the movement of the domainwalls determines the polarization switching process besides the boundary conditions of the film.The critical exponentsare obtained and our investigations show that the boundary conditions play the important roles for the ferroelectricproperties of the thin films and the critical behavior of the thin films strongly depends on the feature of the surface.
文摘By taking into account structural transition zones near the lateral and thickness direction edges,this paper uses a modified transverse Ising model to study dielectric properties of a finite size ferroelectric thin film in the framework of the mean-field approximation.The results indicate that the influence of the lateral size on the dielectric susceptibility cannot be neglected and lateral structural transition zones could be a crucial factor that improves the mean susceptibility of the fixed size film.
基金the financial support from the National Nature Science Foundation of China (Grants Nos.11002123 and 10832009)Zhejiang Provincial Qianjiang Talent Fund(E9027)Key Innovation Fund(2009R50025)
文摘Many distinguished properties of epitaxial ferroelectric thin films can be tunable through the misfit strain.The strain tunability of ferroelectric and dielectric properties in epitaxial lead titanate ultrathin films is numerically investigated by using a phase field model,in which the surface effect of polarization is taken into account.The response of polarization to the applied electric field in the thickness direction is examined with different misfit strains at room temperature.It is found that a compressive misfit strain increases the coercive field and the remanent polarization while a tensile misfit strain decreases both of them.The nonlinear dielectric constants of the thin films with tensile misfit strains are much larger than those of the thin films without misfit strains,which are attributed to the existence of the a/c/a/c multiple domains in the thin films under tensile misfit strains.
基金This work was supported by Russian Science Foundation(Grant No.15-19-00138).
文摘In the present work,the comparative study of the electric response of Sn_(2)P_(2)S_(6) films to the visible light action was carried out without and under external electric field.The light flux modulated by a chopper induces the integral response comprising time-dependent photoelectric and photovoltaic components.It was shown that spontaneous polarization influences the electric response characteristics.
基金Funded by the International Science and Technology Cooperation Project of Hubei Province(2016AHB008)the Natural Science Foundation of Hubei Province(2015CFB724,2016CFA006)+1 种基金the National Natural Science Foundation of China(51272195,51521001)the National Key Research and Development Program of China(2017YFB0310400)
文摘Polycrystalline Bi_4Ti_3O_(12) thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/Si O_2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and ferroelectric property of the films was investigated, so as to explore the possibility of enhancing ferroelectric polarization by controlling the preferred orientation. The structural characterization indicated that the large growth rate and high oxygen background pressure were both favorable for the growth of non-c-axis oriented grains in the Bi_4Ti_3O_(12) thin films. The films with high fractions of a-axis and random orientations, i e, f(a-sxis) = 28.3% and f(random) = 69.6%, could be obtained at the deposition temperature of 973 K, oxygen partial pressure of 15 Pa and laser fluence of 4.6 J/cm^2, respectively. It was also noted that the variation of ferroelectric polarization was in accordance with the evolution non-c-axis orientation. A large value of remanent polarization(2 Pr = 35.5 μC/cm^2) was obtained for the Bi_4Ti_3O_(12) thin films with significant non-c-axis orientation, even higher than that of rare-earth-doped Bi_4Ti_3O_(12) films.
基金Supported by the National Natural Science Foundation of China under Grant No 11304160the Special Fund for Public Interest of China under Grant No 201510068,and the NUPTFC under Grant No NY215111
文摘Properties of ferroelectric xBiInO3-(1-x)PbTiO3(xBI-(1-x)PT) thin films deposited on(101) SrRuO3/(200)Pt/(200) MgO substrates by rf magnetron sputtering method and effects of deposition conditions are investigated.The structures of the xBI-(1-x)PT films are characterized by x-ray diffraction and scanning electron microscopy.The results indicate that the thin films are grown with mainly(001) orientation. The chemical compositions of the films are analyzed by scanning electron probe and the results indicate that the loss phenomena of Pb and Bi elements depend on the pressure and temperature during the sputtering process.The sputtering parameters including target composition, substrate temperature, and gas pressure are adjusted to obtain optimum sputtering conditions. To decrease leakage currents,2 mol% La2 O3 is doped in the targets. The P-E hysteresis loops show that the optimized xBI-(1-x)PT(x = 0.24) film has high ferroelectricities with remnant polarization2 Pr = 80μC/cm2 and coercive electric field 2 EC = 300 kV/cm. The Curie temperature is about 640℃. The results show that the films have optimum performance and will have wide applications.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50871029)the National Basic Research Program of China (Grant Nos. 2010CB923401 and 2009CB929501)the Cyanine-Project Foundation of Jiangsu Province of China (Grant No. 1107020060)
文摘Polycrystalline ferroelectric Bi3.25La0.75Ti3O12 thin films are prepared on Pt/Ti/SiO2/Si substrates by the conventional metalorganic decomposition method. It is observed that with the increase of switching pulse width, the remnant polarisation and the coercive field increase. A wider switching pulse can result in poorer fatigue properties, which comes from more charged defects diffusing to and being trapped on domain walls. On the other hand, when the compressive stress is applied to films, the fatigue properties can be improved. This phenomenon is due to the reorientation of domains under stress.
基金Supported by the Ferroelectric Films Part of 973 Projects (No.51310Z02)
文摘PZT(Zr/Ti=52/48) ferroelectric films are prepared by a new modified Sol-Gel method from three stable-separated Pb2+, Zr4+, Ti4+ precursor–monomers. This method needs no distillation and has the advantage of easy change of the Pb2+/Zr4+/Ti4+ stoichiometric. In the paper we also investigate PT seeds influence on ferroelectric properties, crystallographic structures and surface morphologies, and find the bottom/up PT seeds structure prompte PZT crystallization and have superior ferroeletric properties. The paper introduce a method to deduce and calculate lattice constant α by ‘least square method’, then the more accurate lattice constant a0 can be got from X-ray diffractometer (XRD) analysis data. We also discover that grain sizes of PZT film calculated from XRD data are much closed to those of AFM, and the film a0 is relatively small due to crushing stress.
基金This work was supported by the STCSM (No.13NMI400600) and the National Natural Science Foundation of China (No.U1430106).
文摘Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usually deposited from solution, during which phase separation oc- curred, resulting in discrete semiconducting phase whose electrical property was modulated by surrounding ferroelectric phase. However, phase separation resulted in rough surface and thus large leakage current. To further improve electrical properties of such blend films, poly(methyl metacrylate) (PMMA) was introduced as additive into P3HT/P(VDF-TrFE) semiconducting/ferroelectric blend films in this work. It indicated that small amount of PMMA addition could effectively enhance the electrical stability to both large electrical stress and electrical fatigue and further improve retention performance. Overmuch PMMA addition tended to result in the loss of resistive switching property. A model on the configuration of three components was also put forward to well understand our experimental observations.