Micro-coiled chiral carbon fibers are modified by nano-Ni. X-ray diffraction （XRD） and scanning electron microscopy （SEM） are used to compare the composition and morphology of the unmodified and the modified fiber...Micro-coiled chiral carbon fibers are modified by nano-Ni. X-ray diffraction （XRD） and scanning electron microscopy （SEM） are used to compare the composition and morphology of the unmodified and the modified fibers. The results show that electromagnetism parameters of the modified are different from those of the unmodified. After modification by nano-Ni, the micro-coiled chiral carbon fibers have decreased permittivity and electrical loss. The permeability and magnetic loss of the modified carbon fibers become larger than those of the unmodified ones. Moreover, the modification of unmodified chiral carbon fibers into the modified is much like changing hollow electric windings into those with magnetic cores inside. The modifier intensifies the cross polarization of the chiral carbon fibers and makes the permittivity and the permeability get closer to each other which improves the matching performance and enhances absorbability of coatings. In the range of 6-18 GHz, the reflectivity of the coating is 6-8dB and the bandwidth is 12 GHz. The area density of the coating is below 3 kg/m^2.展开更多
The effects of hot-strip coiling temperature on Ti（C,N） precipitation, texture and hydrogen permeation behavior in DC06 EK enamel steel were investigated by TEM, EBSD test and electrochemical hydrogen permeation exp...The effects of hot-strip coiling temperature on Ti（C,N） precipitation, texture and hydrogen permeation behavior in DC06 EK enamel steel were investigated by TEM, EBSD test and electrochemical hydrogen permeation experiment. It was found that the Ti（C,N） particles in hot-strip coarsened with increasing coiling temperature, whereas after cold-rolling and annealing, the size difference of Ti（C,N） particles was lessened. The hot-strip coiling temperature has a significant impact on the recrystallized texture in the subsequent cold-rolled and annealed sheet. Hot-strip using high temperature（700 ℃） coiling leads to strong {111} recrystallized texture in annealed sheet, with peak intensity 9.2. On the contrary, in annealed sheets using hot-strip coiling at 650 ℃, their {111} recrystallized textures were weaker, which was also reflected in their rmvalues. Even though the hydrogen diffusion coefficient is slightly lower（7.76×10^（-5） mm^2/s） in annealed sheet using low temperature coiling（600 ℃）, appropriately higher coiling temperature is more suitable for DC06 EK enamel steel combining both good drawability and fish-scale resistance.展开更多
文摘Micro-coiled chiral carbon fibers are modified by nano-Ni. X-ray diffraction （XRD） and scanning electron microscopy （SEM） are used to compare the composition and morphology of the unmodified and the modified fibers. The results show that electromagnetism parameters of the modified are different from those of the unmodified. After modification by nano-Ni, the micro-coiled chiral carbon fibers have decreased permittivity and electrical loss. The permeability and magnetic loss of the modified carbon fibers become larger than those of the unmodified ones. Moreover, the modification of unmodified chiral carbon fibers into the modified is much like changing hollow electric windings into those with magnetic cores inside. The modifier intensifies the cross polarization of the chiral carbon fibers and makes the permittivity and the permeability get closer to each other which improves the matching performance and enhances absorbability of coatings. In the range of 6-18 GHz, the reflectivity of the coating is 6-8dB and the bandwidth is 12 GHz. The area density of the coating is below 3 kg/m^2.
基金Funded by the National Natural Science Foundation of China(No.51501056)Natural Science Foundation of Hebei Province(No.E2016209341)+2 种基金Educational Commission of Hebei Province(No.BJ2014031)Project of Science and Technology of Tangshan(Nos.14130243B and 15130202C)Foundation of North China University of Science and Technology(No.JP201510)
文摘The effects of hot-strip coiling temperature on Ti（C,N） precipitation, texture and hydrogen permeation behavior in DC06 EK enamel steel were investigated by TEM, EBSD test and electrochemical hydrogen permeation experiment. It was found that the Ti（C,N） particles in hot-strip coarsened with increasing coiling temperature, whereas after cold-rolling and annealing, the size difference of Ti（C,N） particles was lessened. The hot-strip coiling temperature has a significant impact on the recrystallized texture in the subsequent cold-rolled and annealed sheet. Hot-strip using high temperature（700 ℃） coiling leads to strong {111} recrystallized texture in annealed sheet, with peak intensity 9.2. On the contrary, in annealed sheets using hot-strip coiling at 650 ℃, their {111} recrystallized textures were weaker, which was also reflected in their rmvalues. Even though the hydrogen diffusion coefficient is slightly lower（7.76×10^（-5） mm^2/s） in annealed sheet using low temperature coiling（600 ℃）, appropriately higher coiling temperature is more suitable for DC06 EK enamel steel combining both good drawability and fish-scale resistance.
