In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperatur...In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperature sensors on the position around end filling area, and filling time difference between the various cavities can be calculated. Then the melt temperature of each hot nozzle can be adjusted automatically by a control strategy established based on the Fuzzy Theory and a program compiled with LABVIEW software. Temperature changes the melt mobility, so the adjustment of temperature can equalize the filling time of the melt in each cavity, which can reduced the mass deviation between each cavity and make product properties of each cavity consistent. The conclusion of the experiment is as follows: For this contact lens box of a four-cavity Hot Runner mold, by applying hot runner temperature compensation control system, time difference can be reduced from 0.05 s to 0.01 s at each cavity, and the mass Standard deviation of the four cavity can be improved from 0.006 to 0.002. The ratio of imbalance can be reduced from 20% to 4%. Hence, the hot runner temperature compensation control system has significant feasibility and high potential in improving melt flow balance of multi-cavity molding application.展开更多
In this work,a flowing material balance equation(FMBE) is established for under saturated coalbed methane(CBM) reservoirs,which considers immobile free gas expansion effect at the dewatering stage.Based on the establi...In this work,a flowing material balance equation(FMBE) is established for under saturated coalbed methane(CBM) reservoirs,which considers immobile free gas expansion effect at the dewatering stage.Based on the established FMBE,five straight-line methods are proposed to determine the control area,initial water reserve,initial free gas reserve,initial adsorbed gas reserve,original gas in place,as well as permeability at the same time.Subsequently,the proposed FMBE methods for undersaturated CBM reservoirs are validated against a reservoir simulation software with and without considering free gas expansion.Finally,the proposed methods are applied in a field case when considering free gas expansion effect.Validation cases show that the straight-line relationships for the proposed five FMBE methods are excellent,and good agreements are obtained among the actual reserves and permeabilities and those evaluated by the proposed five FMBE methods,indicating the proposed five FMBE methods are effective and rational for CBM reservoirs.Results show that a small amount of free gas will result in a great deviation in reserve evaluation;hence,the immobile free gas expansion effect should be considered when establishing the material balance equation of undersaturated CBM reservoirs at the dewatering stage.展开更多
Due to the extremely low permeability of shale formations,the combination of horizontal well and volume fracturing has been proposed as an effective technique to improve the production of Dagang continental shale oil ...Due to the extremely low permeability of shale formations,the combination of horizontal well and volume fracturing has been proposed as an effective technique to improve the production of Dagang continental shale oil reservoirs.Based on the flow material balance method(FMB)and straight-line analysis(SLA)method,the stimulated reservoir volume(SRV)and drainage volume are determined to identify the flow regimes of the seepage mechanism of shale oil reservoirs.To resolve the challenges of multi-scaled flow regimes and bottom hole pressure(BHP)variation before and after pumping in shale oil wells,a multi-linear analytical flow model was established to predict the future production and the final expected ultimate recoverable oil(EURo)after fitting the historical production dynamics.Based on the results,it can be concluded that the flow regime of a shale oil well in production can be divided into two stages consisting of linear flow within SRV and composite flow from the un-stimulated area to SRV.The effects of fracturing operation parameters,such as fracturing fluid volume and sand/liquid ratio,on shale oil productivity,are analyzed,and insightful suggestions are drawn for the future development of this pay zone.展开更多
The two-fluid model coupled with population balance model was used for simulating the gas-liquid flow in the Ruhrstahl-Heraeus(RH)degasser.The predicted circulation flow rate was compared with that measured from a wat...The two-fluid model coupled with population balance model was used for simulating the gas-liquid flow in the Ruhrstahl-Heraeus(RH)degasser.The predicted circulation flow rate was compared with that measured from a water model experiment to validate the mathematical model.Then,influence of snorkel immersion depth on liquid circulation flow rate was numerically investigated under an atmospheric pressure of 101 and 84 kPa,respectively.Predicted result indicates that the circulation flow rate of the RH degasser in the high-altitude area was severely reduced because of the decrease in atmospheric pressure.However,increasing the snorkel immersion depth from 0.5 to 0.7 m can compensate for the decrease in atmospheric pressure.Industrial test result indicates that decarburization rate is significantly enhanced by increasing the snorkel immersion depth.Through optimization,the percentage of heats with a final carbon content less than 0.002 wt.%is significantly increased from 22.0%to 96.4%.展开更多
A structued stormwater infiltration system was developed and constructed at a university campus and monitoring of storm events was performed during a one- year operation period. The flow and pollutant mass balances we...A structued stormwater infiltration system was developed and constructed at a university campus and monitoring of storm events was performed during a one- year operation period. The flow and pollutant mass balances were analyzed and the overall efficiency of the system was assessed. While significant positive correla- tions were observed among rainfall, runoff and discharge volume (R2= 0.93-0.99; p 〈 0.05), there was no sig- nificant correlations existed between rainfall, runoff, discharge volume and pollutant load. The system was more effective in reducing the runoff volume by more than 50% for small storm events but the difference between the runoff and discharge volume was significant even with rainfall greater than 10ram. Results showed that the pollutant reduction rates were higher compared to the runoff volume reduction. Average pollutant reduction rates were in the range of 72% to 90% with coefficient of variation between 0.10 and 0.46. Comparable with runoff reduction, the system was more effective in reducing the pollutant load for small storm events, in the range of 80% to 100% for rainfall between 0 and 10mm; while 65% to 80% for rainfall between l0 and 20mm. Among the pollutant parameters, particulate matters was highly reduced by the system achieving only a maximum of 25% discharge load even after the entire runoff was completely discharged. The findings have proven the capability of the system as a tool in stormwater manage- ment achieving both flow reduction and water quality improvement.展开更多
We determine using a compound model the influence of the mass of granular matter on the behavior of a supercritical circulating fluidized bed (CFB) reactor. Population balance enables a stationary-regime modeling of...We determine using a compound model the influence of the mass of granular matter on the behavior of a supercritical circulating fluidized bed (CFB) reactor. Population balance enables a stationary-regime modeling of the mass flow of granular matter inside a CFB unit in a large-scale. The simulation includes some important dynamic processes of gas-particle flows in fluidized bed such as attrition, fragmenta- tion, elutriation, and fuel combustion. Numerical calculations with full boiler loading were performed of operational parameters such as furnace temperature, furnace pressure, feeding materials mass flows, and excess air ratio. Furthermore, three bed inventory masses were adopted as experimental variables in the simulation model of mass balance. This approach enables a sensitivity study of mass flows of granular matter inside a CFB facility. Some computational results from this population balance model obtained for a supercritical CFB reactor are presented that show consistency with the operational data for large-scale CFB units.展开更多
In SDN,the control logic of packet processing devices is moved onto the SDN centralized controller.This decoupled networking architecture creates some critical concerns when compared to traditional distributed archite...In SDN,the control logic of packet processing devices is moved onto the SDN centralized controller.This decoupled networking architecture creates some critical concerns when compared to traditional distributed architectures.One primary concern in this architecture is the placement of the controller,which is commonly known as the CPP.From our extensive literature review,we identify that there is no strict placement rule that best fits every network in SDN.Dynamic addition and deletion of controllers is inevitable.Motivated from this,in this paper,we attempt to transform the CPP into a CSP.We show that,in the dynamic SDN environment,researchers need to pay attention to CSP issues.The clear advantage of CSP over CPP is that,in the dynamic SDN ecosystem,we can answer fundamental questions about the control plane performance,i.e.,minimum number of controllers,their workload distribution,and placement/locations.Furthermore,we can meet strict,application-specific,QoS constraints.展开更多
The Sino-German research collaboration project,"Recycling of organic residues from agricultural and municipal origin in China"(2008–2012),comprising different interdisciplinary research groups,and also Germ...The Sino-German research collaboration project,"Recycling of organic residues from agricultural and municipal origin in China"(2008–2012),comprising different interdisciplinary research groups,and also German small and medium-sized enterprises,aimed at developing integrated strategies and solutions for the recycling of organic residues in China.In an intensive crop-livestock agricultural region in the Shunyi District of Beijing,five typical cropping systems were investigated.The research was conducted in the form of analyses of phosphorus(P)in soil,plants,animal feed,animal products,manures,mineral and organic fertilizers and the derivation of the corresponding nutrient balances and P flows.The mean annual P balance surplus was492 kg·ha–1·yr–1 P for the vegetable production system,significantly higher(P<0.05)than that for orchards(130 kg·ha–1·yr–1 P)and cereal crops(83 kg·ha–1·yr–1 P).Plant-available P(Olsen-P)concentrations of topsoils(0–20 cm)had good correlations with the amounts of P applied(from mineral and organic sources).Compared to results from the Second Chinese National Soil Survey of 1981,mean concentrations of available P in soils of 19 plots investigated in Shunyi District increased 10-fold(from 7.3 to 60 mg·kg–1)from 1981 to 2009.On average,the critical limit for Olsen-P concentrations(>30 mg·kg–1)that can lead to increased risk of P loss was exceeded in all five cropping systems.With feed additives,the"natural background value"(Chinese Environmental Quality Standard for Soils)of copper and zinc in topsoils was exceeded at several sites.Screening for several substances in the veterinary antibiotic classes of sulfonamides,tetracyclines,and fluoroquinolones revealed widespread topsoil contamination.Calculated livestock densities were 10.6 livestock units per ha arable land in 2007.Animal husbandry is increasingly conducted in large operations,making traditional ways of reuse difficult to apply.Comparing three management systems for treatment of organic residues from a pig farm via aerobic(composting)or anaerobic(biogas)treatment in a life cycle assessment,the resulting cropland demand for a sustainable land application of biogas effluent varied between 139 and 288 ha·yr–1,well above the cropland area owned by the farm(10 ha).The mismatch problems in the above context between business-as-usual and improving performance are framed and discussed as(1)the mismatch between centralized animal husbandry and smallholder farming,(2)the mismatch between livestock density and cropland,(3)nutrient(including P)recycling and increasing organic matter content versus energy production,(4)subsidies for compost production and biogas,as well as(5)advances in the regulatory framework in China.展开更多
文摘In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperature sensors on the position around end filling area, and filling time difference between the various cavities can be calculated. Then the melt temperature of each hot nozzle can be adjusted automatically by a control strategy established based on the Fuzzy Theory and a program compiled with LABVIEW software. Temperature changes the melt mobility, so the adjustment of temperature can equalize the filling time of the melt in each cavity, which can reduced the mass deviation between each cavity and make product properties of each cavity consistent. The conclusion of the experiment is as follows: For this contact lens box of a four-cavity Hot Runner mold, by applying hot runner temperature compensation control system, time difference can be reduced from 0.05 s to 0.01 s at each cavity, and the mass Standard deviation of the four cavity can be improved from 0.006 to 0.002. The ratio of imbalance can be reduced from 20% to 4%. Hence, the hot runner temperature compensation control system has significant feasibility and high potential in improving melt flow balance of multi-cavity molding application.
基金supported by the National Science and Technology Major Projects of China (No. 2016ZX05042 and No. 2017ZX05039)the National Natural Science Foundation Projects of China (No. 51504269 and No. 51490654)Science Foundation of China University of Petroleum, Beijing (No.C201605) to support part of this work。
文摘In this work,a flowing material balance equation(FMBE) is established for under saturated coalbed methane(CBM) reservoirs,which considers immobile free gas expansion effect at the dewatering stage.Based on the established FMBE,five straight-line methods are proposed to determine the control area,initial water reserve,initial free gas reserve,initial adsorbed gas reserve,original gas in place,as well as permeability at the same time.Subsequently,the proposed FMBE methods for undersaturated CBM reservoirs are validated against a reservoir simulation software with and without considering free gas expansion.Finally,the proposed methods are applied in a field case when considering free gas expansion effect.Validation cases show that the straight-line relationships for the proposed five FMBE methods are excellent,and good agreements are obtained among the actual reserves and permeabilities and those evaluated by the proposed five FMBE methods,indicating the proposed five FMBE methods are effective and rational for CBM reservoirs.Results show that a small amount of free gas will result in a great deviation in reserve evaluation;hence,the immobile free gas expansion effect should be considered when establishing the material balance equation of undersaturated CBM reservoirs at the dewatering stage.
基金supported by Beijing Municipal Natural Science Foundation (No.2214077)。
文摘Due to the extremely low permeability of shale formations,the combination of horizontal well and volume fracturing has been proposed as an effective technique to improve the production of Dagang continental shale oil reservoirs.Based on the flow material balance method(FMB)and straight-line analysis(SLA)method,the stimulated reservoir volume(SRV)and drainage volume are determined to identify the flow regimes of the seepage mechanism of shale oil reservoirs.To resolve the challenges of multi-scaled flow regimes and bottom hole pressure(BHP)variation before and after pumping in shale oil wells,a multi-linear analytical flow model was established to predict the future production and the final expected ultimate recoverable oil(EURo)after fitting the historical production dynamics.Based on the results,it can be concluded that the flow regime of a shale oil well in production can be divided into two stages consisting of linear flow within SRV and composite flow from the un-stimulated area to SRV.The effects of fracturing operation parameters,such as fracturing fluid volume and sand/liquid ratio,on shale oil productivity,are analyzed,and insightful suggestions are drawn for the future development of this pay zone.
基金supported by the National Natural Science Foundation of China (Grant No.52104321)the Natural Science Foundation of Chongqing,China (Grant No.CSTB2023NSCQ-MSX0871)the Science and Technology Research Program of Chongqing Municipal Education Commission (Grant No.KJQN202101404).
文摘The two-fluid model coupled with population balance model was used for simulating the gas-liquid flow in the Ruhrstahl-Heraeus(RH)degasser.The predicted circulation flow rate was compared with that measured from a water model experiment to validate the mathematical model.Then,influence of snorkel immersion depth on liquid circulation flow rate was numerically investigated under an atmospheric pressure of 101 and 84 kPa,respectively.Predicted result indicates that the circulation flow rate of the RH degasser in the high-altitude area was severely reduced because of the decrease in atmospheric pressure.However,increasing the snorkel immersion depth from 0.5 to 0.7 m can compensate for the decrease in atmospheric pressure.Industrial test result indicates that decarburization rate is significantly enhanced by increasing the snorkel immersion depth.Through optimization,the percentage of heats with a final carbon content less than 0.002 wt.%is significantly increased from 22.0%to 96.4%.
文摘A structued stormwater infiltration system was developed and constructed at a university campus and monitoring of storm events was performed during a one- year operation period. The flow and pollutant mass balances were analyzed and the overall efficiency of the system was assessed. While significant positive correla- tions were observed among rainfall, runoff and discharge volume (R2= 0.93-0.99; p 〈 0.05), there was no sig- nificant correlations existed between rainfall, runoff, discharge volume and pollutant load. The system was more effective in reducing the runoff volume by more than 50% for small storm events but the difference between the runoff and discharge volume was significant even with rainfall greater than 10ram. Results showed that the pollutant reduction rates were higher compared to the runoff volume reduction. Average pollutant reduction rates were in the range of 72% to 90% with coefficient of variation between 0.10 and 0.46. Comparable with runoff reduction, the system was more effective in reducing the pollutant load for small storm events, in the range of 80% to 100% for rainfall between 0 and 10mm; while 65% to 80% for rainfall between l0 and 20mm. Among the pollutant parameters, particulate matters was highly reduced by the system achieving only a maximum of 25% discharge load even after the entire runoff was completely discharged. The findings have proven the capability of the system as a tool in stormwater manage- ment achieving both flow reduction and water quality improvement.
文摘We determine using a compound model the influence of the mass of granular matter on the behavior of a supercritical circulating fluidized bed (CFB) reactor. Population balance enables a stationary-regime modeling of the mass flow of granular matter inside a CFB unit in a large-scale. The simulation includes some important dynamic processes of gas-particle flows in fluidized bed such as attrition, fragmenta- tion, elutriation, and fuel combustion. Numerical calculations with full boiler loading were performed of operational parameters such as furnace temperature, furnace pressure, feeding materials mass flows, and excess air ratio. Furthermore, three bed inventory masses were adopted as experimental variables in the simulation model of mass balance. This approach enables a sensitivity study of mass flows of granular matter inside a CFB facility. Some computational results from this population balance model obtained for a supercritical CFB reactor are presented that show consistency with the operational data for large-scale CFB units.
文摘In SDN,the control logic of packet processing devices is moved onto the SDN centralized controller.This decoupled networking architecture creates some critical concerns when compared to traditional distributed architectures.One primary concern in this architecture is the placement of the controller,which is commonly known as the CPP.From our extensive literature review,we identify that there is no strict placement rule that best fits every network in SDN.Dynamic addition and deletion of controllers is inevitable.Motivated from this,in this paper,we attempt to transform the CPP into a CSP.We show that,in the dynamic SDN environment,researchers need to pay attention to CSP issues.The clear advantage of CSP over CPP is that,in the dynamic SDN ecosystem,we can answer fundamental questions about the control plane performance,i.e.,minimum number of controllers,their workload distribution,and placement/locations.Furthermore,we can meet strict,application-specific,QoS constraints.
基金funded by the German Federal Ministry of Education and Research (BMBF) project “Recycling of organic residues from agricultural and municipal origin in China” (0330847A-H)the Ministry of Science and Technology of China (MOST) (2009DFA32710)the German Academic Exchange Service (DAAD)–China Scholarship Council (CSC)
文摘The Sino-German research collaboration project,"Recycling of organic residues from agricultural and municipal origin in China"(2008–2012),comprising different interdisciplinary research groups,and also German small and medium-sized enterprises,aimed at developing integrated strategies and solutions for the recycling of organic residues in China.In an intensive crop-livestock agricultural region in the Shunyi District of Beijing,five typical cropping systems were investigated.The research was conducted in the form of analyses of phosphorus(P)in soil,plants,animal feed,animal products,manures,mineral and organic fertilizers and the derivation of the corresponding nutrient balances and P flows.The mean annual P balance surplus was492 kg·ha–1·yr–1 P for the vegetable production system,significantly higher(P<0.05)than that for orchards(130 kg·ha–1·yr–1 P)and cereal crops(83 kg·ha–1·yr–1 P).Plant-available P(Olsen-P)concentrations of topsoils(0–20 cm)had good correlations with the amounts of P applied(from mineral and organic sources).Compared to results from the Second Chinese National Soil Survey of 1981,mean concentrations of available P in soils of 19 plots investigated in Shunyi District increased 10-fold(from 7.3 to 60 mg·kg–1)from 1981 to 2009.On average,the critical limit for Olsen-P concentrations(>30 mg·kg–1)that can lead to increased risk of P loss was exceeded in all five cropping systems.With feed additives,the"natural background value"(Chinese Environmental Quality Standard for Soils)of copper and zinc in topsoils was exceeded at several sites.Screening for several substances in the veterinary antibiotic classes of sulfonamides,tetracyclines,and fluoroquinolones revealed widespread topsoil contamination.Calculated livestock densities were 10.6 livestock units per ha arable land in 2007.Animal husbandry is increasingly conducted in large operations,making traditional ways of reuse difficult to apply.Comparing three management systems for treatment of organic residues from a pig farm via aerobic(composting)or anaerobic(biogas)treatment in a life cycle assessment,the resulting cropland demand for a sustainable land application of biogas effluent varied between 139 and 288 ha·yr–1,well above the cropland area owned by the farm(10 ha).The mismatch problems in the above context between business-as-usual and improving performance are framed and discussed as(1)the mismatch between centralized animal husbandry and smallholder farming,(2)the mismatch between livestock density and cropland,(3)nutrient(including P)recycling and increasing organic matter content versus energy production,(4)subsidies for compost production and biogas,as well as(5)advances in the regulatory framework in China.