The influence of Ti, B, RE (cerium-rich mixtures of rare earth) and Sr, applied in modification and refining processes, on A356 aluminum alloys has been studied with the aids of OM, etc. The results show that the grai...The influence of Ti, B, RE (cerium-rich mixtures of rare earth) and Sr, applied in modification and refining processes, on A356 aluminum alloys has been studied with the aids of OM, etc. The results show that the grain refining efficiency of Grain-Refining Aluminium Ingot (GRAI) and Al-Ti master alloys is similar. But the Tiaddition from GRAI has lower costs than that with Al-Ti master alloys. So A356 aluminum alloys produced with GRAI are feasible in economy. Grain refining with GRAI with 0.01%Ti plus additional 0.03% B offers significant advantages over that from GRAI with 0.1% Ti only in A356 aluminum alloys, which made the dendrite α(Al) grain structure transform into equiaxed α(Al) grain structure, plus a partially modified eutectic silicon structure. RE addition to A356 aluminum alloys with Sr modifier is enable to achieve small DAS, reduced pores, well-refined fibrous silicon, small and dispersive eutectic colonies.展开更多
The semi-solid slurry of A356 alloy, which is grain-refined by Al-Ti-B master alloy, is prepared by low superheat pouring and slight electromagnetic stirring. The effects of grain refining on the morphology and the gr...The semi-solid slurry of A356 alloy, which is grain-refined by Al-Ti-B master alloy, is prepared by low superheat pouring and slight electromagnetic stirring. The effects of grain refining on the morphology and the grain size of the primary α phase in the slurry manufactured are researched. The results indicate that the slurry with particle-like and rosette-like primary α phases can be prepared by low superheat pouring and slight electromagnetic stirring from liquid A356 alloy grain-refined, in which the pouring temperature can be suitably raised. Compared with the A356 samples without grain refining, the grain size and particle morphology of primary α phase as well as the distribution of the grain with particle-like or rosette-like along radial in the ingot in A356 are markedly improved by grain refining.展开更多
The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechan...The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechanical properties was investigated by theoretical calculations. The results showed that 32.9% of V（C,N） precipitates remained undissolved in the austenite during the soaking step of the normalizing process. These precipitates prevented the growth of the austenite grains. During the subsequent cooling process, the dissolved V（C,N） re-precipitated and played a role in precipitation strengthening. The undissolved V（C,N） induced intragranular ferrite nucleation and refined the ferrite grains. Consequently, compared with hot-rolled steel, the normalized steel exhibited increased grain-refining strengthening but diminished precipitation strengthening, leading to an improvement of the impact energy at the expense of about 40 MPa yield strength.展开更多
文摘The influence of Ti, B, RE (cerium-rich mixtures of rare earth) and Sr, applied in modification and refining processes, on A356 aluminum alloys has been studied with the aids of OM, etc. The results show that the grain refining efficiency of Grain-Refining Aluminium Ingot (GRAI) and Al-Ti master alloys is similar. But the Tiaddition from GRAI has lower costs than that with Al-Ti master alloys. So A356 aluminum alloys produced with GRAI are feasible in economy. Grain refining with GRAI with 0.01%Ti plus additional 0.03% B offers significant advantages over that from GRAI with 0.1% Ti only in A356 aluminum alloys, which made the dendrite α(Al) grain structure transform into equiaxed α(Al) grain structure, plus a partially modified eutectic silicon structure. RE addition to A356 aluminum alloys with Sr modifier is enable to achieve small DAS, reduced pores, well-refined fibrous silicon, small and dispersive eutectic colonies.
基金financially supported by National High Technical Research and Development Program of China(No.G2002AA336080)National Natural Science Foundation of China(No.50374012)Natural Science Foundation of Jiangxi Province(No.0650047).
文摘The semi-solid slurry of A356 alloy, which is grain-refined by Al-Ti-B master alloy, is prepared by low superheat pouring and slight electromagnetic stirring. The effects of grain refining on the morphology and the grain size of the primary α phase in the slurry manufactured are researched. The results indicate that the slurry with particle-like and rosette-like primary α phases can be prepared by low superheat pouring and slight electromagnetic stirring from liquid A356 alloy grain-refined, in which the pouring temperature can be suitably raised. Compared with the A356 samples without grain refining, the grain size and particle morphology of primary α phase as well as the distribution of the grain with particle-like or rosette-like along radial in the ingot in A356 are markedly improved by grain refining.
基金Item Sponsored by National Science and Technology Pillar Program of China(2011BAE25B01)
文摘The precipitation behavior of V-N microalloyed steel during normalizing process was studied by physicochemical phase analysis and transmission electron microscopy（TEM）. The effect of precipitation behavior on mechanical properties was investigated by theoretical calculations. The results showed that 32.9% of V（C,N） precipitates remained undissolved in the austenite during the soaking step of the normalizing process. These precipitates prevented the growth of the austenite grains. During the subsequent cooling process, the dissolved V（C,N） re-precipitated and played a role in precipitation strengthening. The undissolved V（C,N） induced intragranular ferrite nucleation and refined the ferrite grains. Consequently, compared with hot-rolled steel, the normalized steel exhibited increased grain-refining strengthening but diminished precipitation strengthening, leading to an improvement of the impact energy at the expense of about 40 MPa yield strength.
