Strong atmospheric turbulence reduces astronomical seeing,causing speckle images acquired by ground-based solar telescopes to become blurred and distorted.Severe distortion in speckle images impedes image phase deviat...Strong atmospheric turbulence reduces astronomical seeing,causing speckle images acquired by ground-based solar telescopes to become blurred and distorted.Severe distortion in speckle images impedes image phase deviation in the speckle masking reconstruction method,leading to the appearance of spurious imaging artifacts.Relying only on linear image degradation principles to reconstruct solar images is insufficient.To solve this problem,we propose the multiframe blind deconvolution combined with non-rigid alignment(MFBD-CNRA)method for solar image reconstruction.We consider image distortion caused by atmospheric turbulence and use non-rigid alignment to correct pixel-level distortion,thereby achieving nonlinear constraints to complement image intensity changes.After creating the corrected speckle image,we use the linear method to solve the wavefront phase,obtaining the target image.We verify the effectiveness of our method results,compared with others,using solar observation data from the 1 m new vacuum solar telescope(NVST).This new method successfully reconstructs high-resolution images of solar observations with a Fried parameter r0 of approximately 10 cm,and enhances images at high frequency.When r0 is approximately 5 cm,the new method is even more effective.It reconstructs the edges of solar graining and sunspots,and is greatly enhanced at mid and high frequency compared with other methods.Comparisons confirm the effectiveness of this method,with respect to both nonlinear and linear constraints in solar image reconstruction.This provides a suitable solution for image reconstruction in ground-based solar observations under strong atmospheric turbulence.展开更多
Computed tomography has made significant advances since its intro-duction in the early 1970s,where researchers have mainly focused on the quality of image reconstruction in the early stage.However,radiation exposure p...Computed tomography has made significant advances since its intro-duction in the early 1970s,where researchers have mainly focused on the quality of image reconstruction in the early stage.However,radiation exposure poses a health risk,prompting the demand of the lowest possible dose when carrying out CT examinations.To acquire high-quality reconstruction images with low dose radiation,CT reconstruction techniques have evolved from conventional reconstruction such as analytical and iterative reconstruction,to reconstruction methods based on artificial intelligence(AI).All these efforts are devoted to con-structing high-quality images using only low doses with fast reconstruction speed.In particular,conventional reconstruction methods usually optimize one aspect,while AI-based reconstruction has finally managed to attain all goals in one shot.However,there are limitations such as the requirements on large datasets,unstable performance,and weak generalizability in AI-based reconstruction methods.This work presents the review and discussion on the classification,the commercial use,the advantages,and the limitations of AI-based image reconstruction methods in CT.展开更多
Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method...Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method.The commonly used Monte Carlo simulation method ensures well-performing imaging results for DR.However,for 3-D reconstruction,it is limited by its high time consumption.To solve this problem,this study proposes a parallel computing method to accelerate Monte Carlo simulation for projection images with a parallel interface and a specific DR application.The images are utilized for 3-D reconstruction of the test model.We verify the accuracy of parallel computing for DR and evaluate the performance of two parallel computing modes-multithreaded applications(G4-MT)and message-passing interfaces(G4-MPI)-by assessing parallel speedup and efficiency.This study explores the scalability of the hybrid G4-MPI and G4-MT modes.The results show that the two parallel computing modes can significantly reduce the Monte Carlo simulation time because the parallel speedup increment of Monte Carlo simulations can be considered linear growth,and the parallel efficiency is maintained at a high level.The hybrid mode has strong scalability,as the overall run time of the 180 simulations using 320 threads is 15.35 h with 10 billion particles emitted,and the parallel speedup can be up to 151.36.The 3-D reconstruction of the model is achieved based on the filtered back projection(FBP)algorithm using 180 projection images obtained with the hybrid G4-MPI and G4-MT.The quality of the reconstructed sliced images is satisfactory because the images can reflect the internal structure of the test model.This method is applied to a complex model,and the quality of the reconstructed images is evaluated.展开更多
In this paper, we improve traditional generative adversarial networks (GAN) with reference to residual networks and convolutional neural networks to facilitate the reconstruction of complex objects that cannot be reco...In this paper, we improve traditional generative adversarial networks (GAN) with reference to residual networks and convolutional neural networks to facilitate the reconstruction of complex objects that cannot be reconstructed by traditional associative imaging methods. Unlike traditional ghost imaging to reconstruct objects from bucket signals, our proposed method can use simple objects (such as EMNIST) as a training set for GAN, and then recognize objects (such as faces) of completely different complexity than the training set. We use traditional ghost imaging and neural network to reconstruct target objects respectively. According to the research results in this paper, the method based on neural network can reconstruct complex objects very well, but the method based on traditional ghost imaging cannot reconstruct complex objects. The research scheme in this paper is of great significance for the reconstruction of complex object-related imaging under low sampling conditions.展开更多
Traditional three-dimensional(3D)image reconstruction method,which highly dependent on the environment and has poor reconstruction effect,is easy to lead to mismatch and poor real-time performance.The accuracy of feat...Traditional three-dimensional(3D)image reconstruction method,which highly dependent on the environment and has poor reconstruction effect,is easy to lead to mismatch and poor real-time performance.The accuracy of feature extraction from multiple images affects the reliability and real-time performance of 3D reconstruction technology.To solve the problem,a multi-view image 3D reconstruction algorithm based on self-encoding convolutional neural network is proposed in this paper.The algorithm first extracts the feature information of multiple two-dimensional(2D)images based on scale and rotation invariance parameters of Scale-invariant feature transform(SIFT)operator.Secondly,self-encoding learning neural network is introduced into the feature refinement process to take full advantage of its feature extraction ability.Then,Fish-Net is used to replace the U-Net structure inside the self-encoding network to improve gradient propagation between U-Net structures,and Generative Adversarial Networks(GAN)loss function is used to replace mean square error(MSE)to better express image features,discarding useless features to obtain effective image features.Finally,an incremental structure from motion(SFM)algorithm is performed to calculate rotation matrix and translation vector of the camera,and the feature points are triangulated to obtain a sparse spatial point cloud,and meshlab software is used to display the results.Simulation experiments show that compared with the traditional method,the image feature extraction method proposed in this paper can significantly improve the rendering effect of 3D point cloud,with an accuracy rate of 92.5%and a reconstruction complete rate of 83.6%.展开更多
A multi-channel fast super-resolution image reconstruction algorithm based on matrix observation model is proposed in the paper,which consists of three steps to avoid the computational complexity: a single image SR re...A multi-channel fast super-resolution image reconstruction algorithm based on matrix observation model is proposed in the paper,which consists of three steps to avoid the computational complexity: a single image SR reconstruction step,a registration step and a wavelet-based image fusion. This algorithm decomposes two large matrixes to the tensor product of two little matrixes and uses the natural isomorphism between matrix space and vector space to transform cost function based on matrix-vector products model to matrix form. Furthermore,we prove that the regularization part can be transformed to the matrix formed. The conjugate-gradient method is used to solve this new model. Finally,the wavelet fusion is used to integrate all the registered highresolution images obtained from the single image SR reconstruction step. The proposed algorithm reduces the storage requirement and the calculating complexity,and can be applied to large-dimension low-resolution images.展开更多
The state-of-the-art approaches for image reconstruction using under-sampled k-space data are compressed sensing based.They are iterative algorithms that optimize objective functions with spatial and/or temporal const...The state-of-the-art approaches for image reconstruction using under-sampled k-space data are compressed sensing based.They are iterative algorithms that optimize objective functions with spatial and/or temporal constraints.This paper proposes a non-iterative algorithm to estimate the un-measured data and then to reconstruct the image with the efficient filtered backprojection algorithm.The feasibility of the proposed method is demonstrated with a patient magnetic resonance imaging study.The proposed method is also compared with the state-of-the-art iterative compressed-sensing image reconstruction method using the total-variation optimization norm.展开更多
Electrical Impedance Tomography (EIT) is a medical imaging technique which can be used to monitor the regional ventilation in patients utilizing voltage measurements made at the thorax. Several reconstruction algorith...Electrical Impedance Tomography (EIT) is a medical imaging technique which can be used to monitor the regional ventilation in patients utilizing voltage measurements made at the thorax. Several reconstruction algorithms have been developed during the last few years. In this manuscript we compare a well-established algorithm and a re-cently developed method for image reconstruction regarding EIT indices derived from the differently reconstructed images.展开更多
In this editorial,we review recent progress on the applications of artificial intelligence(AI)in image reconstruction for biomedical imaging.Because it abandons prior information of traditional artificial design and a...In this editorial,we review recent progress on the applications of artificial intelligence(AI)in image reconstruction for biomedical imaging.Because it abandons prior information of traditional artificial design and adopts a completely data-driven mode to obtain deeper prior information via learning,AI technology plays an increasingly important role in biomedical image reconstruction.The combination of AI technology and the biomedical image reconstruction method has become a hotspot in the field.Favoring AI,the performance of biomedical image reconstruction has been improved in terms of accuracy,resolution,imaging speed,etc.We specifically focus on how to use AI technology to improve the performance of biomedical image reconstruction,and propose possible future directions in this field.展开更多
The purpose of this study is to introduce a novel empirical iterative algorithm for medical image reconstruction, under the short name MRP-ISWLS (Median Root Prior Image Space Weighted Least Squares). Further, we asse...The purpose of this study is to introduce a novel empirical iterative algorithm for medical image reconstruction, under the short name MRP-ISWLS (Median Root Prior Image Space Weighted Least Squares). Further, we assess the performance of the new algorithm by comparing it to the simultaneous version of known MRP algorithms. All algorithms are compared in terms of cross-correlation and CNRs (Contrast-to-Noise Ratios). As it turns out, MRP-ISWLS presents higher CNRs than the known algorithms for objects of different size. Also MRP-ISWLS has better noise manipulation.展开更多
Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limita...Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limitation, and rapid scan time, etc. However, in CBCT images the x-ray beam has lower mean kilovolt (peak) energy, so the metal artifact is more pronounced on. The position of the shadowed region in other views can be tracked by projecting the 3D coordinates of the object. Automatic image segmentation was used to replace the pixels inside the metal object with the boundary pixels. The modified projection data, using synthetically Radon Transformation, were then used to reconstruct a new back projected CBCT image. In this paper, we present a method, based on the morphological, area and pixel operators, which we applied on the Radon transformed image, to reduce the metal artifacts in CBCT, then we built the Radon back project images using the radon invers transformation. The artifacts effects on the 3d-reconstruction is that, the soft tissues appears as bones or teeth. For the preprocessing of the CBCT images, two methods are used to recognize the noisy black areas that the first depends on thresholding and closing algorithm, and the second depends on tracing boundaries after using thresholding algorithm too. The intensity of these areas is the lowest in the image than other tissues, so we profit this property to detect the edges of these areas. These two methods are applied on phantom and patient image data. It deals with reconstructed CBCT dicom images and can effectively reduce such metal artifacts. Due to the data of the constructed images are corrupted by these metal artifacts, qualitative and quantitative analysis of CBCT images is very essential.展开更多
A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the motio...A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the motion-compensated reference image in wavelet transform domain,the proposed method does not need to estimate contrast changes and therefore increases computational efficiency.Additionally,NLTV regularization is applied to preserve image details and features without blocky effects.An efficient alternating iterative algorithm is used to estimate motion effects and reconstruct the difference image.Experimental results demonstrate that the proposed method can significantly reduce sampling rate or improve the quality of the reconstructed image alternatively.展开更多
Linear scan computed tomography (LCT) is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practi...Linear scan computed tomography (LCT) is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation (TV) minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method (ADM) to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.展开更多
3D image reconstruction for weather radar data can not only help the weatherman to improve the forecast efficiency and accuracy, but also help people to understand the weather conditions easily and quickly. Marching C...3D image reconstruction for weather radar data can not only help the weatherman to improve the forecast efficiency and accuracy, but also help people to understand the weather conditions easily and quickly. Marching Cubes (MC) algorithm in the surface rendering has more excellent applicability in 3D reconstruction for the slice images;it may shorten the time to find and calculate the isosurface from raw volume data, reflect the shape structure more accurately. In this paper, we discuss a method to reconstruct the 3D weather cloud image by using the proposed Cube Weighting Interpolation (CWI) and MC algorithm. Firstly, we detail the steps of CWI, apply it to project the raw radar data into the cubes and obtain the equally spaced cloud slice images, then employ MC algorithm to draw the isosurface. Some experiments show that our method has a good effect and simple operation, which may provide an intuitive and effective reference for realizing the 3D surface reconstruction and meteorological image stereo visualization.展开更多
An indirect imager working at terahertz band is presented and implemented,which is suitable for high-resolution planar object detection.The proposed imager employs a simple quasi-optics design to transmit and to recei...An indirect imager working at terahertz band is presented and implemented,which is suitable for high-resolution planar object detection.The proposed imager employs a simple quasi-optics design to transmit and to receive terahertz waves,and adopts incoherent detection technology to extract the intensity of echoed signal,which results in a relatively low complexity and cost.Moreover,the Fienup Fourier phase-retrieval algorithm is successfully modified and is applied to retrieve the phase of the echoed signal and reconstruct the target image.Imaging experiments on typical planar objects are performed with the imager working at 0.2 THz,and the experimental results demonstrate the good performance of the proposed imager and validate the effectiveness of the reconstruction algorithm.展开更多
With the development of the compressive sensing theory,the image reconstruction from the projections viewed in limited angles is one of the hot problems in the research of computed tomography technology.This paper dev...With the development of the compressive sensing theory,the image reconstruction from the projections viewed in limited angles is one of the hot problems in the research of computed tomography technology.This paper develops an iterative algorithm for image reconstruction,which can fit most cases.This method gives an image reconstruction flow with the difference image vector,which is based on the concept that the difference image vector between the reconstructed and the reference image is sparse enough.Then the l_2-norm minimization method is used to reconstruct the difference vector to recover the image for flat subjects in limited angles.The algorithm has been tested with a thin planar phantom and a real object in limited-view projection data.Moreover,all the studies showed the satisfactory results in accuracy at a rather high reconstruction speed.展开更多
The additional sparse prior of images has been the subject of much research in problems of sparse-view computed tomography(CT) reconstruction. A method employing the image gradient sparsity is often used to reduce the...The additional sparse prior of images has been the subject of much research in problems of sparse-view computed tomography(CT) reconstruction. A method employing the image gradient sparsity is often used to reduce the sampling rate and is shown to remove the unwanted artifacts while preserve sharp edges, but may cause blocky or patchy artifacts.To eliminate this drawback, we propose a novel sparsity exploitation-based model for CT image reconstruction. In the presented model, the sparse representation and sparsity exploitation of both gradient and nonlocal gradient are investigated.The new model is shown to offer the potential for better results by introducing a similarity prior information of the image structure. Then, an effective alternating direction minimization algorithm is developed to optimize the objective function with a robust convergence result. Qualitative and quantitative evaluations have been carried out both on the simulation and real data in terms of accuracy and resolution properties. The results indicate that the proposed method can be applied for achieving better image-quality potential with the theoretically expected detailed feature preservation.展开更多
基金sponsored by the National Natural Science Foundation of China(NSFC)under the grant numbers(11773073,11873027,U2031140,11833010)Yunnan Key Laboratory of Solar Physics and Space Science under the number 202205AG070009+1 种基金Yunnan Provincial Science and Technology Department(202103AD50013,202105AB160001,202305AH340002)the GHfund A202302013242 and CAS“Light of West China”Program 202305AS350029.
文摘Strong atmospheric turbulence reduces astronomical seeing,causing speckle images acquired by ground-based solar telescopes to become blurred and distorted.Severe distortion in speckle images impedes image phase deviation in the speckle masking reconstruction method,leading to the appearance of spurious imaging artifacts.Relying only on linear image degradation principles to reconstruct solar images is insufficient.To solve this problem,we propose the multiframe blind deconvolution combined with non-rigid alignment(MFBD-CNRA)method for solar image reconstruction.We consider image distortion caused by atmospheric turbulence and use non-rigid alignment to correct pixel-level distortion,thereby achieving nonlinear constraints to complement image intensity changes.After creating the corrected speckle image,we use the linear method to solve the wavefront phase,obtaining the target image.We verify the effectiveness of our method results,compared with others,using solar observation data from the 1 m new vacuum solar telescope(NVST).This new method successfully reconstructs high-resolution images of solar observations with a Fried parameter r0 of approximately 10 cm,and enhances images at high frequency.When r0 is approximately 5 cm,the new method is even more effective.It reconstructs the edges of solar graining and sunspots,and is greatly enhanced at mid and high frequency compared with other methods.Comparisons confirm the effectiveness of this method,with respect to both nonlinear and linear constraints in solar image reconstruction.This provides a suitable solution for image reconstruction in ground-based solar observations under strong atmospheric turbulence.
基金This work is supported by the National Key Research and Development Program of China(2020YFC2003400)Qiang Ni’s work was funded by the UK EPSRC project under grant number EP/K011693/1.
文摘Computed tomography has made significant advances since its intro-duction in the early 1970s,where researchers have mainly focused on the quality of image reconstruction in the early stage.However,radiation exposure poses a health risk,prompting the demand of the lowest possible dose when carrying out CT examinations.To acquire high-quality reconstruction images with low dose radiation,CT reconstruction techniques have evolved from conventional reconstruction such as analytical and iterative reconstruction,to reconstruction methods based on artificial intelligence(AI).All these efforts are devoted to con-structing high-quality images using only low doses with fast reconstruction speed.In particular,conventional reconstruction methods usually optimize one aspect,while AI-based reconstruction has finally managed to attain all goals in one shot.However,there are limitations such as the requirements on large datasets,unstable performance,and weak generalizability in AI-based reconstruction methods.This work presents the review and discussion on the classification,the commercial use,the advantages,and the limitations of AI-based image reconstruction methods in CT.
基金the China Natural Science Fund(No.52171253)the Natural Science Foundation of Sichuan(No.2022NSFSCO949).
文摘Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method.The commonly used Monte Carlo simulation method ensures well-performing imaging results for DR.However,for 3-D reconstruction,it is limited by its high time consumption.To solve this problem,this study proposes a parallel computing method to accelerate Monte Carlo simulation for projection images with a parallel interface and a specific DR application.The images are utilized for 3-D reconstruction of the test model.We verify the accuracy of parallel computing for DR and evaluate the performance of two parallel computing modes-multithreaded applications(G4-MT)and message-passing interfaces(G4-MPI)-by assessing parallel speedup and efficiency.This study explores the scalability of the hybrid G4-MPI and G4-MT modes.The results show that the two parallel computing modes can significantly reduce the Monte Carlo simulation time because the parallel speedup increment of Monte Carlo simulations can be considered linear growth,and the parallel efficiency is maintained at a high level.The hybrid mode has strong scalability,as the overall run time of the 180 simulations using 320 threads is 15.35 h with 10 billion particles emitted,and the parallel speedup can be up to 151.36.The 3-D reconstruction of the model is achieved based on the filtered back projection(FBP)algorithm using 180 projection images obtained with the hybrid G4-MPI and G4-MT.The quality of the reconstructed sliced images is satisfactory because the images can reflect the internal structure of the test model.This method is applied to a complex model,and the quality of the reconstructed images is evaluated.
文摘In this paper, we improve traditional generative adversarial networks (GAN) with reference to residual networks and convolutional neural networks to facilitate the reconstruction of complex objects that cannot be reconstructed by traditional associative imaging methods. Unlike traditional ghost imaging to reconstruct objects from bucket signals, our proposed method can use simple objects (such as EMNIST) as a training set for GAN, and then recognize objects (such as faces) of completely different complexity than the training set. We use traditional ghost imaging and neural network to reconstruct target objects respectively. According to the research results in this paper, the method based on neural network can reconstruct complex objects very well, but the method based on traditional ghost imaging cannot reconstruct complex objects. The research scheme in this paper is of great significance for the reconstruction of complex object-related imaging under low sampling conditions.
基金This work is funded by Key Scientific Research Projects of Colleges and Universities in Henan Province under Grant 22A460022Training Plan for Young Backbone Teachers in Colleges and Universities in Henan Province under Grant 2021GGJS077.
文摘Traditional three-dimensional(3D)image reconstruction method,which highly dependent on the environment and has poor reconstruction effect,is easy to lead to mismatch and poor real-time performance.The accuracy of feature extraction from multiple images affects the reliability and real-time performance of 3D reconstruction technology.To solve the problem,a multi-view image 3D reconstruction algorithm based on self-encoding convolutional neural network is proposed in this paper.The algorithm first extracts the feature information of multiple two-dimensional(2D)images based on scale and rotation invariance parameters of Scale-invariant feature transform(SIFT)operator.Secondly,self-encoding learning neural network is introduced into the feature refinement process to take full advantage of its feature extraction ability.Then,Fish-Net is used to replace the U-Net structure inside the self-encoding network to improve gradient propagation between U-Net structures,and Generative Adversarial Networks(GAN)loss function is used to replace mean square error(MSE)to better express image features,discarding useless features to obtain effective image features.Finally,an incremental structure from motion(SFM)algorithm is performed to calculate rotation matrix and translation vector of the camera,and the feature points are triangulated to obtain a sparse spatial point cloud,and meshlab software is used to display the results.Simulation experiments show that compared with the traditional method,the image feature extraction method proposed in this paper can significantly improve the rendering effect of 3D point cloud,with an accuracy rate of 92.5%and a reconstruction complete rate of 83.6%.
基金Sponsored by the National Natural Science Foundation of China(Grant No.60474016)the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.2009046)
文摘A multi-channel fast super-resolution image reconstruction algorithm based on matrix observation model is proposed in the paper,which consists of three steps to avoid the computational complexity: a single image SR reconstruction step,a registration step and a wavelet-based image fusion. This algorithm decomposes two large matrixes to the tensor product of two little matrixes and uses the natural isomorphism between matrix space and vector space to transform cost function based on matrix-vector products model to matrix form. Furthermore,we prove that the regularization part can be transformed to the matrix formed. The conjugate-gradient method is used to solve this new model. Finally,the wavelet fusion is used to integrate all the registered highresolution images obtained from the single image SR reconstruction step. The proposed algorithm reduces the storage requirement and the calculating complexity,and can be applied to large-dimension low-resolution images.
基金supported by American Heart Association,No.18AJML34280074.
文摘The state-of-the-art approaches for image reconstruction using under-sampled k-space data are compressed sensing based.They are iterative algorithms that optimize objective functions with spatial and/or temporal constraints.This paper proposes a non-iterative algorithm to estimate the un-measured data and then to reconstruct the image with the efficient filtered backprojection algorithm.The feasibility of the proposed method is demonstrated with a patient magnetic resonance imaging study.The proposed method is also compared with the state-of-the-art iterative compressed-sensing image reconstruction method using the total-variation optimization norm.
文摘Electrical Impedance Tomography (EIT) is a medical imaging technique which can be used to monitor the regional ventilation in patients utilizing voltage measurements made at the thorax. Several reconstruction algorithms have been developed during the last few years. In this manuscript we compare a well-established algorithm and a re-cently developed method for image reconstruction regarding EIT indices derived from the differently reconstructed images.
基金Supported by The National Key R&D Program of China,No.2018YFC0910600the National Natural Science Foundation of China No.81627807 and 11727813+2 种基金Shaanxi Science Funds for Distinguished Young Scholars,No.2020JC-27the Fok Ying Tung Education Foundation,No.161104and Program for the Young Topnotch Talent of Shaanxi Province.
文摘In this editorial,we review recent progress on the applications of artificial intelligence(AI)in image reconstruction for biomedical imaging.Because it abandons prior information of traditional artificial design and adopts a completely data-driven mode to obtain deeper prior information via learning,AI technology plays an increasingly important role in biomedical image reconstruction.The combination of AI technology and the biomedical image reconstruction method has become a hotspot in the field.Favoring AI,the performance of biomedical image reconstruction has been improved in terms of accuracy,resolution,imaging speed,etc.We specifically focus on how to use AI technology to improve the performance of biomedical image reconstruction,and propose possible future directions in this field.
文摘The purpose of this study is to introduce a novel empirical iterative algorithm for medical image reconstruction, under the short name MRP-ISWLS (Median Root Prior Image Space Weighted Least Squares). Further, we assess the performance of the new algorithm by comparing it to the simultaneous version of known MRP algorithms. All algorithms are compared in terms of cross-correlation and CNRs (Contrast-to-Noise Ratios). As it turns out, MRP-ISWLS presents higher CNRs than the known algorithms for objects of different size. Also MRP-ISWLS has better noise manipulation.
文摘Cone-beam CT (CBCT) scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector [1,2]. Compared to traditional CT, CBCT has many advantages, such as less X-ray beam limitation, and rapid scan time, etc. However, in CBCT images the x-ray beam has lower mean kilovolt (peak) energy, so the metal artifact is more pronounced on. The position of the shadowed region in other views can be tracked by projecting the 3D coordinates of the object. Automatic image segmentation was used to replace the pixels inside the metal object with the boundary pixels. The modified projection data, using synthetically Radon Transformation, were then used to reconstruct a new back projected CBCT image. In this paper, we present a method, based on the morphological, area and pixel operators, which we applied on the Radon transformed image, to reduce the metal artifacts in CBCT, then we built the Radon back project images using the radon invers transformation. The artifacts effects on the 3d-reconstruction is that, the soft tissues appears as bones or teeth. For the preprocessing of the CBCT images, two methods are used to recognize the noisy black areas that the first depends on thresholding and closing algorithm, and the second depends on tracing boundaries after using thresholding algorithm too. The intensity of these areas is the lowest in the image than other tissues, so we profit this property to detect the edges of these areas. These two methods are applied on phantom and patient image data. It deals with reconstructed CBCT dicom images and can effectively reduce such metal artifacts. Due to the data of the constructed images are corrupted by these metal artifacts, qualitative and quantitative analysis of CBCT images is very essential.
基金Supported by the National Natural Science Foundation of China(61077022)
文摘A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the motion-compensated reference image in wavelet transform domain,the proposed method does not need to estimate contrast changes and therefore increases computational efficiency.Additionally,NLTV regularization is applied to preserve image details and features without blocky effects.An efficient alternating iterative algorithm is used to estimate motion effects and reconstruct the difference image.Experimental results demonstrate that the proposed method can significantly reduce sampling rate or improve the quality of the reconstructed image alternatively.
基金the National High Technology Research and Development Program of China(Grant No.2012AA011603)
文摘Linear scan computed tomography (LCT) is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation (TV) minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method (ADM) to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.
文摘3D image reconstruction for weather radar data can not only help the weatherman to improve the forecast efficiency and accuracy, but also help people to understand the weather conditions easily and quickly. Marching Cubes (MC) algorithm in the surface rendering has more excellent applicability in 3D reconstruction for the slice images;it may shorten the time to find and calculate the isosurface from raw volume data, reflect the shape structure more accurately. In this paper, we discuss a method to reconstruct the 3D weather cloud image by using the proposed Cube Weighting Interpolation (CWI) and MC algorithm. Firstly, we detail the steps of CWI, apply it to project the raw radar data into the cubes and obtain the equally spaced cloud slice images, then employ MC algorithm to draw the isosurface. Some experiments show that our method has a good effect and simple operation, which may provide an intuitive and effective reference for realizing the 3D surface reconstruction and meteorological image stereo visualization.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174280,60990323,and 60990320the Knowledge Innovation Program of the Chinese Academy of Sciences under Grant No YYYJ-1123.
文摘An indirect imager working at terahertz band is presented and implemented,which is suitable for high-resolution planar object detection.The proposed imager employs a simple quasi-optics design to transmit and to receive terahertz waves,and adopts incoherent detection technology to extract the intensity of echoed signal,which results in a relatively low complexity and cost.Moreover,the Fienup Fourier phase-retrieval algorithm is successfully modified and is applied to retrieve the phase of the echoed signal and reconstruct the target image.Imaging experiments on typical planar objects are performed with the imager working at 0.2 THz,and the experimental results demonstrate the good performance of the proposed imager and validate the effectiveness of the reconstruction algorithm.
基金Project supported by the National Basic Research Program of China(Grant No.2006CB7057005)the National High Technology Research and Development Program of China(Grant No.2009AA012200)the National Natural Science Foundation of China (Grant No.60672104)
文摘With the development of the compressive sensing theory,the image reconstruction from the projections viewed in limited angles is one of the hot problems in the research of computed tomography technology.This paper develops an iterative algorithm for image reconstruction,which can fit most cases.This method gives an image reconstruction flow with the difference image vector,which is based on the concept that the difference image vector between the reconstructed and the reference image is sparse enough.Then the l_2-norm minimization method is used to reconstruct the difference vector to recover the image for flat subjects in limited angles.The algorithm has been tested with a thin planar phantom and a real object in limited-view projection data.Moreover,all the studies showed the satisfactory results in accuracy at a rather high reconstruction speed.
基金Project supported by the National Natural Science Foundation of China(Grant No.61372172)
文摘The additional sparse prior of images has been the subject of much research in problems of sparse-view computed tomography(CT) reconstruction. A method employing the image gradient sparsity is often used to reduce the sampling rate and is shown to remove the unwanted artifacts while preserve sharp edges, but may cause blocky or patchy artifacts.To eliminate this drawback, we propose a novel sparsity exploitation-based model for CT image reconstruction. In the presented model, the sparse representation and sparsity exploitation of both gradient and nonlocal gradient are investigated.The new model is shown to offer the potential for better results by introducing a similarity prior information of the image structure. Then, an effective alternating direction minimization algorithm is developed to optimize the objective function with a robust convergence result. Qualitative and quantitative evaluations have been carried out both on the simulation and real data in terms of accuracy and resolution properties. The results indicate that the proposed method can be applied for achieving better image-quality potential with the theoretically expected detailed feature preservation.
