Aiming to achieve simultaneous good performances of in-situ sludge reduction and effluent quality,an integrated repeatedly coupling aerobic and anaerobic and oxic-setting-anaerobic system( r CAA + OSA) is developed to...Aiming to achieve simultaneous good performances of in-situ sludge reduction and effluent quality,an integrated repeatedly coupling aerobic and anaerobic and oxic-setting-anaerobic system( r CAA + OSA) is developed to reduce sludge production and enhance nutrient removal. Considering the mechanism of in-situ sludge reduction in this r CAA +OSA system,the combined effect of energy uncoupling metabolism and sludge cryptic growth maybe attributed to the higher reduction of biomass. Results show that the maximal sludge reduction in this r CAA + OSA system is obtained when the hydraulic retention time( HRT) is controlled at6. 5 h,which an increase in 16. 67% reduction in excess sludge is achieved compared with OSA system( HRT of 6. 5 h). When compared the performances of effluent qualities,the enhanced nutrient removal efficiencies also can be observed in this r CAA + OSA system. Three-dimensional excitation emission matrix( 3D-EEM)fluorescence spectroscopy is applied to characterize the effluent organic matters( Ef OM) under different HRTs in the OSA and the r CAA+OSA systems. Analyses of 3D-EEM spectra show that more refractory humic-like and fulvic-like components are observed in the effluent of the OSA system. On the basis of these results,simultaneous enhanced in-situ sludge reduction and improved nutrient removal can be obtained in the r CAA +OSA systems.展开更多
To improve the sludge conditioning efficiency without increasing the ozone dose,an in-situ sludge reduction process based on Mn^(2+)-catalytic ozonation conditioning was proposed.Using ozone conditioning alone as a co...To improve the sludge conditioning efficiency without increasing the ozone dose,an in-situ sludge reduction process based on Mn^(2+)-catalytic ozonation conditioning was proposed.Using ozone conditioning alone as a control,a lab-scale sequencing batch reactor coupled with ozonated sludge recycle was evaluated for its operating performance at an ozone dose of 75 mg O_(3)/g VSS and 1.5 mmol/L Mn^(2+)addition.The results showed a 39.4%reduction in MLSS and an observed sludge yield of 0.236 kg MLSS/kg COD for the O_(3)+Mn^(2+)group compared to the O_(3)group (15.3%and 0.292 kg MLSS/kg COD),accompanied by better COD,NH_(4)^(+)-N,TN and TP removal,improved effluent SS and limited impact on excess sludge properties.Subsequently,activity tests,BIOLOG ECO microplates and 16S rRNA sequencing were applied to elucidate the changing mechanisms of Mn^(2+)-catalytic ozonation related to microbial action:(1) Dehydrogenase activity reached a higher peak.(2) Microbial utilization of total carbon sources had an elevated effect,up to approximately 18%,and metabolic levels of six carbon sources were also increased,especially for sugars and amino acids most pronounced.(3) The abundance of Defluviicoccus under the phylum Proteobacteria was enhanced to 12.0%and dominated in the sludge,they had strong hydrolytic activity and metabolic capacity.Denitrifying bacteria of the genus Ferruginibacter also showed an abundance of 7.6%,they contributed to the solubilization and reduction of sludge biomass.These results could guide researchers to further reduce ozonation conditioning costs,improve sludge management and provide theoretical support.展开更多
Ammonia(NH_(3))is an important raw material for modern agriculture and industry,being widely demanded to sustain the sustainable development of modern society.Currently,the industrial production methods of NH_(3),such...Ammonia(NH_(3))is an important raw material for modern agriculture and industry,being widely demanded to sustain the sustainable development of modern society.Currently,the industrial production methods of NH_(3),such as the traditional Haber-Bosch process,have drawbacks including high energy consumption and significant carbon dioxide emissions.In recent years,the electrocatalytic nitrate reduction reaction(NO_(3)RR)powered by intermittent renewable energy sources has gradually become a multidisciplinary research hotspot,as it allows for the efficient synthesis of NH_(3)under mild conditions.In this review,we focus on the research of electrocatalysts with atomic-level site,which have attracted attention due to their extremely high atomic utilization efficiency and unique structural characteristics in the field of NO_(3)RR.Firstly,we introduce the mechanism of nitrate reduction for ammonia synthesis and discuss the in-situ characterization techniques related to the mechanism study.Secondly,we review the progress of the electrocatalysts with atomic-level site for nitrate reduction and explore the structure-activity relationship to guide the rational design of efficient catalysts.Lastly,the conclusions of this review and the challenges and prospective of this promising field are presented.展开更多
In this study, composite briquettes were prepared using gravity dust and converter sludge as the main materials; these briquettes were subsequently reduced in a tube furnace at 1000-1300℃ for 5-30 min under a nitroge...In this study, composite briquettes were prepared using gravity dust and converter sludge as the main materials; these briquettes were subsequently reduced in a tube furnace at 1000-1300℃ for 5-30 min under a nitrogen atmosphere. The effects of reaction temperature, reaction time, and carbon content on the metallization and dezincification ratios of the composite briquettes were studied. The reduced com- posite briquettes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and energy-dispersive spectroscopy （EDS）. The results show that the gravity dust and converter sludge are combined into the composite briquettes and a reasonable combination not only improves the performance of the composite briquettes, but also leads to the reduction with no or little reductant and flux. As the re- action temperature is increased and the reaction time is extended, the metallization and dezincification ratios of the composite briquettes in- crease gradually. When the composite briquettes are roasted at 1300℃ for 30 rain, the metallization ratio and dezineification ratio reaches 91.35% and 99.25%, respectively, indicating that most of the iron oxide is reduced and the zinc is almost completely removed. The carbon content is observed to exert a lesser effect on the reduction process; as the C/O molar ratio increases, the metallization and dezincification ra- tios first increase and then decrease.展开更多
To reduce excess sludge, a Tubificidae reactor was combined with an integrated oxidation ditch with vertical circle （IODVC）, and a new integrated system was developed for wastewater treatment, A pilot-scale of this ...To reduce excess sludge, a Tubificidae reactor was combined with an integrated oxidation ditch with vertical circle （IODVC）, and a new integrated system was developed for wastewater treatment, A pilot-scale of this integrated system was tested to investigate the sludge reduction with Tubificidae and the impact on effluent quality and sludge production. The dominant worm was Branchnria Sowerbyi in the Tubificidae reactor after inoculation of Branchnria Sowerbyi and Limnodrilns sp., and the maximal volume density of wet Tubificidae in vessels of the Tubificidae reactor was 17600 g/m^3. Two operational modes, treating the excess sludge （first mode） and the returned sludge （second mode） of IODVC by the Tubificidae reactor, were used in this experiment. The results showed that the excess sludge reduction rate was 46.4% in the first mode, and the average sludge yield of the integrated system was 6.19× 10^-5 kg SS/kg COD in the second mode. Though the sludge returned to IODVC via the Tubificidae reactor, it had little impact on the effluent quality and the sludge characteristics of the IODVC. No new type of recalcitrant substance in the supernatant was discharged into the environment when the sludge was treated by Tubificidae. The experimental results also indicated that no significant changes occurred on the viscosity, specific resistance, and the floc size distribution of the sludge.展开更多
The aim of the research was to obtain both an excellent effluent for reuse and a reduced sludge production simultaneously by a combination process of anaerobic phase and Membrane bioreactor （MBR） technology in treat...The aim of the research was to obtain both an excellent effluent for reuse and a reduced sludge production simultaneously by a combination process of anaerobic phase and Membrane bioreactor （MBR） technology in treating domestic wastewater. During the experimental period of three months, excellent removals for COD, NH3-H, TN were obtained, and mean removals were 91.87%, 96.13%, and 69. 23%, respectively. Whereas, at first 20 days, the removal for TP was only about 15.87%. In the following days, about 30% of raw water was introduced into the anaerobic reactor to supply organics for denitrificatien and release of polyphosphate, then a significant improvement for TP removal was observed, and mean removal of TP increased to 76.35%. During the operational period, it was investigated that the permeate could meet the requirements of several water criteria for reuse except free chlorine, and a mean excess sludge yield coefficient of 0.137 g MLSS/g COD was obtained. Therefore, the predicted goals of permeate for reuse and excess sludge reduction could be both achieved after dosing a certain quantity of disinfectant into the permeate.展开更多
An advanced sludge reduction process, i.e. sludge reduction and phosphorous removal process, was developed. The results show that excellent sludge reduction and biological phosphorous removal can be achieved perfectly...An advanced sludge reduction process, i.e. sludge reduction and phosphorous removal process, was developed. The results show that excellent sludge reduction and biological phosphorous removal can be achieved perfectly in this system. When chemical oxygen demand ρ（COD） is 332 - 420 mg/L, concentration of ammonia p（NH3-N） is 30 - 40 mg/L and concentration of total phosphorous p（TP） is 6.0 -9.0 mg/L in influent, the system still ensures ρ（COD）〈23 mg/L, ρ（NH3-N）〈3.2 mg/L and ρ（TP）〈0. 72 mg/L in effluent. Besides, when the concentration of dissolved oxygen ρ（DO） is around 1.0 mg/L, sludge production is less than 0. 140 g with the consumption of 1 g COD, and the phosphorous removal exceeds 91 %. Also, 48.4% of total nitrogen is removed by simultaneous nitrification and denitrification.展开更多
This work takes sludge drying and incineration and pollutant discharge characteristics as the main line of research.With sludge dewatered by a certain sewage plant in southern Jiangsu using machinery and chemical cond...This work takes sludge drying and incineration and pollutant discharge characteristics as the main line of research.With sludge dewatered by a certain sewage plant in southern Jiangsu using machinery and chemical conditioners selected as the research object,the influencing factors such as particle size,drying temperature and sludge reverse-mixing ratio in the sludge drying process were mainly explored,and the best working conditions of sludge drying were further analyzed.On this basis,in-depth research was carried out on the pollutants such as NO_(x),SO_(2),HCl,CO and other pollutants generated in the sludge incineration process by investigating the incineration temperature,sewage,the sludge moisture content and excess air coefficient.The results showed that the best conditions for sludge drying were as follows:particle size 3.5 mm,temperature 210℃and reverse-mixing ratio 25,and the cumulative drying time of the sludge 445.21 min.Through the research on the pollutant emission characteristics of sludge incineration,it was found that the incineration temperature and the moisture content of the sludge had a greater impact on the emission concentrations of NO_(x),SO_(2),HCl,and CO.Among them,the incineration temperature was the key factor that affected the generation of NO_(x),SO_(2),HCl,and CO.展开更多
Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overco...Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.展开更多
Covalent organic frameworks(COFs)have emerged as a class of promising supports for electrocatalysis because of their advantages including good crystallinity,highly ordered pores,and structural diversity.However,their ...Covalent organic frameworks(COFs)have emerged as a class of promising supports for electrocatalysis because of their advantages including good crystallinity,highly ordered pores,and structural diversity.However,their poor conductivity represents the main obstruction to their practical application.Here,we reported a novel synthesis strategy for synergistically endowing a triphenylamine-based COFs with improved electrical conductivity and excellent catalytic activity for oxygen reduction,via the in-situ redox deposition and confined growth of palladium nanoparticles inside the porous structure of COFs using reductive triphenylamine frameworks as reducing agent;meanwhile,the triphenylamine unit was oxidized to radical cation structure and affords radical cation COFs with conductivity as high as3.2*10^(-1) S m^(-1).Such a uniform confine palladium nanoparticle on highly conductive COFs makes it an efficient electrocatalyst for four-electron oxygen reduction reaction(4e-ORR),showing excellent activities and fast kinetics with a remarkable half-wave potential(E_(1/2))of 0.865 V and an ultralow Tafel slope of 39.7 mV dec^(-1) in alkaline media even in the absence of extra commercial conductive fillers.The generality of this strategy was proved by preparing the different metal and metal alloy nanoparticles supported on COFs(Au@COF,Pt@COF,AuPd@COF,AgPd@COF,and PtPd@COF)using reductive triphenylamine frameworks as reducing agent.This work not only provides a facile strategy for the fabrication of highly conductive COF supported ORR electrocatalysts,but also sheds new light on the practical application of Zn-air battery.展开更多
The electrocatalytic conversion of reactive nitrogen species to ammonia is a promising strategy for efficient NH_(3) synthesis.In this study,we reveal that the hybrid Cu^(+)/Cu~0 interface is catalytically active for ...The electrocatalytic conversion of reactive nitrogen species to ammonia is a promising strategy for efficient NH_(3) synthesis.In this study,we reveal that the hybrid Cu^(+)/Cu~0 interface is catalytically active for electrochemical ammonia synthesis from nitrate reduction.To maintain the hybrid Cu^(+)/Cu~0 state at negative reaction potentials,hydrophilic zeolite is used to modify Cu/Cu_(2)O electrocatalyst,which demonstrates an impressive NH_(3) production rate of 41.65 mg h^(-1) cm^(-2)with ~100% Faradaic efficiency of ammonia synthesis at-0.6 V vs.RHE.In-situ Raman spectroscopy unveil the high activity originates from the zeolite reconstruction at the electrode–electrolyte interface,which protects the valence state of Cu~0/Cu^(+) site under negative potential and promotes electrochemical activity towards NH_(3) synthesis.展开更多
Transition metal compound(TMC)/carbon hybrids,as prospering electrocatalyst,have attracted great attention in the field of oxygen reduction reaction(ORR).Their morphology,structure and composition often play a crucial...Transition metal compound(TMC)/carbon hybrids,as prospering electrocatalyst,have attracted great attention in the field of oxygen reduction reaction(ORR).Their morphology,structure and composition often play a crucial role in determining the ORR performance.In this work,we for the first time report the successful fabrication of porous core-shell Fe_(1-x)S@N,S co-doped carbon(Fe_(1-x)S@NSC-t,t represents etching time)by a novel in-situ self-template induced strategy using Fe3O4 nanospheres and pyrrole as sacrificial self-template.The post-polymerization of pyrrole can be accomplished by the Fe^(3+)released through the etching of Fe_(3)O_(4) by HCl acid.Thus,the etching time has a significant effect on the morphology,structure,composition a nd ORR performance of Fe_(1-x)S@NSC-t.Based on the cha racterizations,we find Fe_(1-x)S@NSC-24 can realize effective and balanced combination of Fe_(1-x)S and NSC,possessing porous core-shell architecture,optimized structure defect,specific surface area and doped heteroatoms configurations(especially for pyridinic N,graphitic N and Fe-N structure).These features thus lead to outstanding catalytic activity and cycling stability towards ORR.Our work provides a good guidance on the design of TMC/carbon-based electrodes with unique stable morphology and optimized structure and composition.展开更多
Resol type phenolic resin/silver nanocomposite was prepared by in-situ reduction method, in which the curing of phenolic resin and the formation of silver nano-particles took place simultaneously. The silver ions wer...Resol type phenolic resin/silver nanocomposite was prepared by in-situ reduction method, in which the curing of phenolic resin and the formation of silver nano-particles took place simultaneously. The silver ions were reduced completely to silver nanoparticles, which were dispersed homogeneously in the resin matrix with narrow size distribution.展开更多
Electrochemical nitrate reduction reaction (NITRR) is regarded as a “two birds-one stone” method for the treatment of nitrate contaminant in polluted water and the synthesis of valuable ammonia, which is retarded by...Electrochemical nitrate reduction reaction (NITRR) is regarded as a “two birds-one stone” method for the treatment of nitrate contaminant in polluted water and the synthesis of valuable ammonia, which is retarded by the lack of highly reactive and selective electrocatalysts .Herein, for the first time, nickel foam supported Co_(4) N was designed as a high-performance NITRR catalyst by an in-situ nonmetal leaching-induced strategy.At the optimal potential, the Co_(4) N/NF catalyst achieves ultra-high Faraday efficiency and NH_(3) selectivity of 95.4% and 99.4%, respectively.Ex situ X-ray absorption spectroscopy (XAS), together with other experiments powerfully reveal that the nitrogen vacancies produced by nitrogen leaching are stable and play a key role in boosting nitrate reduction to ammonia.Theoretical calculations confirm that Co_(4) N with abundant nitrogen vacancies can optimize the adsorption energies of NO_(3)^(-) and intermediates, lower the free energy (Δ G ) of the potential-determining step (*NH_(3) to NH_(3) ) and inhibit the formation of N-containing byproducts.In addition, we also conclude that the nitrogen vacancies can stabilize the adsorbed hydrogen, making H_(2) quite difficult to produce, and lowering ΔG from *NO to *NOH, which facilitates the selective reduction of nitrate.This study reveals significant insights about the in-situ nonmetal leaching to enhance the NITRR activity.展开更多
Resource recycling from waste-water and sludge is an important part of the 14th Five-Year Plan in China.The emerging titanium-based coagulants have drawn growing attentions due to their strong coagulation capability i...Resource recycling from waste-water and sludge is an important part of the 14th Five-Year Plan in China.The emerging titanium-based coagulants have drawn growing attentions due to their strong coagulation capability in water purification and value-added Ti-loaded sludge production.Management and recovery of the high value-added sludge into functional nanomaterials is highly significant for both sludge reduction and environmental remediation.The present study was carried out to investigate the recycle of the coagulated Ti-loaded sludge to produce functional C/TiO_(2)composites as the anode materials for lithium-ion batteries(LIBs).It is the first time that the application of the Ti-loaded wastewater sludge derived C/TiO_(2)was evaluated for LIBs.The experimental results showed that the carbon coating through in-situ carbonization of the sludge produced the C/TiO_(2)composites with a high specific surface area,stable structural integrity,and excellent electrochemical properties that would facilitate Li+diffusion in long-term LIBs usage.The C/TiO_(2)composites calcinated from the polytitanium sulfate-coagulated sludge at 800℃(N_(2))exhibited the best electrochemical performance during the cycling tests(601 m Ah/g at 100 m A/g after 200 cycles).The research work demonstrates the promising prospect of the recycle and value-added utilization of the Ti-loaded sludge in the production of high-performance C/TiO_(2)composites for energy storage applications.This study provides a new way for the management and reuse of Ti-loaded waste-sludge.展开更多
Based on the in-situ self-reduction and chemical stability,graphdiyne(GDY)and graphdiyne oxide(GDYO)are used as trapping agents to investigate the ability for recovering Au^(3+),Ag^+,and Pd^(2+)under different pH valu...Based on the in-situ self-reduction and chemical stability,graphdiyne(GDY)and graphdiyne oxide(GDYO)are used as trapping agents to investigate the ability for recovering Au^(3+),Ag^+,and Pd^(2+)under different pH values and interfering ions.Under strong acidity at pH=1,these two agents demonstrate high select recovery towards the three precious metal ions,which could be insitu reduced to nanoparticles(NPs).In addition,superparamagnetic Fe_(3)O_(4)NPs are deposited on the surfaces of GDY and GDYO.The magnetic responses enable GDYFe_(3)O_(4)to recover precious metals conveniently and efficiently by the aid of an external magnetic field.This study also confirms the antibacterial activity of the as-recovered NPs deposited on GDY and GDYO against Escherichia coli and Staphylococcus aureus(1×10^(5)colony-forming unit(CFU)·mL^(-1)),and the antibacterial rates are 100%.This strategy of recovering precious metals and subsequently reusing to combat pathogens will be of great significance for environmental remediation and biomedical applications.展开更多
Oily cold rolling mill （CRM） sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at...Oily cold rolling mill （CRM） sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at the same time. The compound methods of ＂vacuum distillation ＋ oxidizing roasting＂ and ＂vacuum distillation ＋ hydrogen reduction＂ were employed for the recycle of oily cold rolling mill sludge. First, the sludge was dynamically vacuum distilled in a rotating furnace at 50 r/rain and 600℃ for 3 h, which removed almost hazardous organic components, obtaining 89.2wt% ferrous resultant. Then, high purity ferric oxide powders （99.2wt%） and reduced iron powders （98.9wt%） were obtained when the distillation residues were oxidized and reduced, respectively. The distillation oil can be used for fuel or chemical feedstock, and the distillation gases can be collected and reused as a fuel.展开更多
Metal-free, heteroatom functionalized carbon-based catalysts have made remarkable progress in recent years in a wide range of applications related to energy storage and energy generation. In this study, high surface a...Metal-free, heteroatom functionalized carbon-based catalysts have made remarkable progress in recent years in a wide range of applications related to energy storage and energy generation. In this study, high surface area mesoporous ordered sulphur doped carbon materials are obtained via one-pot hydrothermal synthesis of carbon/SBA-15 composite after removal of in-situ synthesized hard template SiO2. 2-thiophenecarboxy acid as sulphur source gives rise to sulphur doping level of 5.5 wt%. Comparing with pristine carbon, the sulphur doped mesoporous ordered carbon demonstrates improved electro-catalytic activity in the oxygen reduction reaction in alkaline solution. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.展开更多
N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechan...N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechanism is essential to suppress the N2O emission during the low-temperature NH3-SCR, and requires an intensive study of this heterogeneous catalysis process. In this study, we investigated the reaction between NH3 and NO over a Pd/CeO2 catalyst in the absence of O2, using X-ray photoelectron spectroscopy, NH3-temperature-programmed desorption, NO-temperature-programmed desorption, and in-situ Fourier-transform infrared spectroscopy. Our results indicate that the N2O formation mechanism is reaction-temperature-dependent. At temperatures below 250 ℃, the dissociation of HON, which is produced from the reaction between surface H· adatoms and adsorbed NO, is the key process for N2O formation. At temperatures above 250 ℃,the reaction between NO and surface N·, which is produced by NO dissociation, is the only route for N2O formation, and the dissociation of NO is the rate-determining step. Under optimal reaction conditions, a high performance with nearly 100% NO conversion and 100% N2 selectivity could be achieved. These results provide important information to clarify the mechanism of N2O formation and possible suppression of N2 O emission during low-temperature NH3-SCR.展开更多
Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quant...Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quantity was lower than 5 m^3/h,the optimal operation parameters of the three-phase centrifuge are shown as follows: the frequency of the main motor and vice motor was 33 and 30 Hz respectively,and the flocculant flow was 0. 7 m^3/h,while the oily sludge temperature was 55 ℃. Water content in the separated sludge decreased from 98% to lower than 70%,and the goal of reduction and harmless treatment of oily sludge could be achieved,which could provide essential conditions for subsequent resource utilization and could be used to guide industrial production.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51008105 and 51121062)the State Key Laboratory of Urban Water Resource and Environment(Grant No.2014TS06)+1 种基金the Department of Education Fund for Doctoral Tutor(Grant No.20122302110054)the Special S&T Project on Treatment and Control of Water Pollution(Grant No.2013ZX07201007-001)
文摘Aiming to achieve simultaneous good performances of in-situ sludge reduction and effluent quality,an integrated repeatedly coupling aerobic and anaerobic and oxic-setting-anaerobic system( r CAA + OSA) is developed to reduce sludge production and enhance nutrient removal. Considering the mechanism of in-situ sludge reduction in this r CAA +OSA system,the combined effect of energy uncoupling metabolism and sludge cryptic growth maybe attributed to the higher reduction of biomass. Results show that the maximal sludge reduction in this r CAA + OSA system is obtained when the hydraulic retention time( HRT) is controlled at6. 5 h,which an increase in 16. 67% reduction in excess sludge is achieved compared with OSA system( HRT of 6. 5 h). When compared the performances of effluent qualities,the enhanced nutrient removal efficiencies also can be observed in this r CAA + OSA system. Three-dimensional excitation emission matrix( 3D-EEM)fluorescence spectroscopy is applied to characterize the effluent organic matters( Ef OM) under different HRTs in the OSA and the r CAA+OSA systems. Analyses of 3D-EEM spectra show that more refractory humic-like and fulvic-like components are observed in the effluent of the OSA system. On the basis of these results,simultaneous enhanced in-situ sludge reduction and improved nutrient removal can be obtained in the r CAA +OSA systems.
基金supported by the National Natural Science Foundation of China (Nos. 52192684 and 52270136)the National Key Research and Development Project (No. 2020YFC1908704)China Three Gorges Corporation (No. 202003166)。
文摘To improve the sludge conditioning efficiency without increasing the ozone dose,an in-situ sludge reduction process based on Mn^(2+)-catalytic ozonation conditioning was proposed.Using ozone conditioning alone as a control,a lab-scale sequencing batch reactor coupled with ozonated sludge recycle was evaluated for its operating performance at an ozone dose of 75 mg O_(3)/g VSS and 1.5 mmol/L Mn^(2+)addition.The results showed a 39.4%reduction in MLSS and an observed sludge yield of 0.236 kg MLSS/kg COD for the O_(3)+Mn^(2+)group compared to the O_(3)group (15.3%and 0.292 kg MLSS/kg COD),accompanied by better COD,NH_(4)^(+)-N,TN and TP removal,improved effluent SS and limited impact on excess sludge properties.Subsequently,activity tests,BIOLOG ECO microplates and 16S rRNA sequencing were applied to elucidate the changing mechanisms of Mn^(2+)-catalytic ozonation related to microbial action:(1) Dehydrogenase activity reached a higher peak.(2) Microbial utilization of total carbon sources had an elevated effect,up to approximately 18%,and metabolic levels of six carbon sources were also increased,especially for sugars and amino acids most pronounced.(3) The abundance of Defluviicoccus under the phylum Proteobacteria was enhanced to 12.0%and dominated in the sludge,they had strong hydrolytic activity and metabolic capacity.Denitrifying bacteria of the genus Ferruginibacter also showed an abundance of 7.6%,they contributed to the solubilization and reduction of sludge biomass.These results could guide researchers to further reduce ozonation conditioning costs,improve sludge management and provide theoretical support.
基金financial support from the Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX24_0690)financial support from the National Natural Science Foundation of China (Project No. 22275088, 52101260)+4 种基金the Project of Shuangchuang Scholar of Jiangsu Province (Project No. JSSCBS20210212)the Fundamental Research Funds for the Central Universities (Project No. 30921011203)the Start-Up Grant (Project No. AE89991/340) from Nanjing University of Science and Technologyfinancial support from the Foundation of Jiangsu Educational Committee (22KJB310008)the Senior Talent Program of Jiangsu University (20JDG073)
文摘Ammonia(NH_(3))is an important raw material for modern agriculture and industry,being widely demanded to sustain the sustainable development of modern society.Currently,the industrial production methods of NH_(3),such as the traditional Haber-Bosch process,have drawbacks including high energy consumption and significant carbon dioxide emissions.In recent years,the electrocatalytic nitrate reduction reaction(NO_(3)RR)powered by intermittent renewable energy sources has gradually become a multidisciplinary research hotspot,as it allows for the efficient synthesis of NH_(3)under mild conditions.In this review,we focus on the research of electrocatalysts with atomic-level site,which have attracted attention due to their extremely high atomic utilization efficiency and unique structural characteristics in the field of NO_(3)RR.Firstly,we introduce the mechanism of nitrate reduction for ammonia synthesis and discuss the in-situ characterization techniques related to the mechanism study.Secondly,we review the progress of the electrocatalysts with atomic-level site for nitrate reduction and explore the structure-activity relationship to guide the rational design of efficient catalysts.Lastly,the conclusions of this review and the challenges and prospective of this promising field are presented.
基金financially supported by the National Natural Science Foundation of China(No.U1260202)the National Basic Research Priorities Program of China(No.2012CB720401)the State Key Laboratory of Solid Waste Reuse for Building Materials
文摘In this study, composite briquettes were prepared using gravity dust and converter sludge as the main materials; these briquettes were subsequently reduced in a tube furnace at 1000-1300℃ for 5-30 min under a nitrogen atmosphere. The effects of reaction temperature, reaction time, and carbon content on the metallization and dezincification ratios of the composite briquettes were studied. The reduced com- posite briquettes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and energy-dispersive spectroscopy （EDS）. The results show that the gravity dust and converter sludge are combined into the composite briquettes and a reasonable combination not only improves the performance of the composite briquettes, but also leads to the reduction with no or little reductant and flux. As the re- action temperature is increased and the reaction time is extended, the metallization and dezincification ratios of the composite briquettes in- crease gradually. When the composite briquettes are roasted at 1300℃ for 30 rain, the metallization ratio and dezineification ratio reaches 91.35% and 99.25%, respectively, indicating that most of the iron oxide is reduced and the zinc is almost completely removed. The carbon content is observed to exert a lesser effect on the reduction process; as the C/O molar ratio increases, the metallization and dezincification ra- tios first increase and then decrease.
基金Project supported by the National Natural Science Foundation of China(No. 50238050).
文摘To reduce excess sludge, a Tubificidae reactor was combined with an integrated oxidation ditch with vertical circle （IODVC）, and a new integrated system was developed for wastewater treatment, A pilot-scale of this integrated system was tested to investigate the sludge reduction with Tubificidae and the impact on effluent quality and sludge production. The dominant worm was Branchnria Sowerbyi in the Tubificidae reactor after inoculation of Branchnria Sowerbyi and Limnodrilns sp., and the maximal volume density of wet Tubificidae in vessels of the Tubificidae reactor was 17600 g/m^3. Two operational modes, treating the excess sludge （first mode） and the returned sludge （second mode） of IODVC by the Tubificidae reactor, were used in this experiment. The results showed that the excess sludge reduction rate was 46.4% in the first mode, and the average sludge yield of the integrated system was 6.19× 10^-5 kg SS/kg COD in the second mode. Though the sludge returned to IODVC via the Tubificidae reactor, it had little impact on the effluent quality and the sludge characteristics of the IODVC. No new type of recalcitrant substance in the supernatant was discharged into the environment when the sludge was treated by Tubificidae. The experimental results also indicated that no significant changes occurred on the viscosity, specific resistance, and the floc size distribution of the sludge.
文摘The aim of the research was to obtain both an excellent effluent for reuse and a reduced sludge production simultaneously by a combination process of anaerobic phase and Membrane bioreactor （MBR） technology in treating domestic wastewater. During the experimental period of three months, excellent removals for COD, NH3-H, TN were obtained, and mean removals were 91.87%, 96.13%, and 69. 23%, respectively. Whereas, at first 20 days, the removal for TP was only about 15.87%. In the following days, about 30% of raw water was introduced into the anaerobic reactor to supply organics for denitrificatien and release of polyphosphate, then a significant improvement for TP removal was observed, and mean removal of TP increased to 76.35%. During the operational period, it was investigated that the permeate could meet the requirements of several water criteria for reuse except free chlorine, and a mean excess sludge yield coefficient of 0.137 g MLSS/g COD was obtained. Therefore, the predicted goals of permeate for reuse and excess sludge reduction could be both achieved after dosing a certain quantity of disinfectant into the permeate.
基金Project (50278101) supported by the National Natural Science Foundation of China Project( CSTC, 2005AB7030)supported by Chongqing Key Technologies Research and Development Program
文摘An advanced sludge reduction process, i.e. sludge reduction and phosphorous removal process, was developed. The results show that excellent sludge reduction and biological phosphorous removal can be achieved perfectly in this system. When chemical oxygen demand ρ（COD） is 332 - 420 mg/L, concentration of ammonia p（NH3-N） is 30 - 40 mg/L and concentration of total phosphorous p（TP） is 6.0 -9.0 mg/L in influent, the system still ensures ρ（COD）〈23 mg/L, ρ（NH3-N）〈3.2 mg/L and ρ（TP）〈0. 72 mg/L in effluent. Besides, when the concentration of dissolved oxygen ρ（DO） is around 1.0 mg/L, sludge production is less than 0. 140 g with the consumption of 1 g COD, and the phosphorous removal exceeds 91 %. Also, 48.4% of total nitrogen is removed by simultaneous nitrification and denitrification.
基金Supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_2596).
文摘This work takes sludge drying and incineration and pollutant discharge characteristics as the main line of research.With sludge dewatered by a certain sewage plant in southern Jiangsu using machinery and chemical conditioners selected as the research object,the influencing factors such as particle size,drying temperature and sludge reverse-mixing ratio in the sludge drying process were mainly explored,and the best working conditions of sludge drying were further analyzed.On this basis,in-depth research was carried out on the pollutants such as NO_(x),SO_(2),HCl,CO and other pollutants generated in the sludge incineration process by investigating the incineration temperature,sewage,the sludge moisture content and excess air coefficient.The results showed that the best conditions for sludge drying were as follows:particle size 3.5 mm,temperature 210℃and reverse-mixing ratio 25,and the cumulative drying time of the sludge 445.21 min.Through the research on the pollutant emission characteristics of sludge incineration,it was found that the incineration temperature and the moisture content of the sludge had a greater impact on the emission concentrations of NO_(x),SO_(2),HCl,and CO.Among them,the incineration temperature was the key factor that affected the generation of NO_(x),SO_(2),HCl,and CO.
基金the National Natural Science Foundation of China(No.52072256)Shanxi Science and Technology Major Project(No.20201101016)+1 种基金Key R&D program of Shanxi Province(No.202102030201006)Research Project Supported by Shanxi Scholarship Council of China(HGKY2019031).
文摘Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.
基金financially supported by the National Natural Science Foundation of China(21674068,52173133,52161145402)the Sichuan Science and Technology Department(2021YFH0180)。
文摘Covalent organic frameworks(COFs)have emerged as a class of promising supports for electrocatalysis because of their advantages including good crystallinity,highly ordered pores,and structural diversity.However,their poor conductivity represents the main obstruction to their practical application.Here,we reported a novel synthesis strategy for synergistically endowing a triphenylamine-based COFs with improved electrical conductivity and excellent catalytic activity for oxygen reduction,via the in-situ redox deposition and confined growth of palladium nanoparticles inside the porous structure of COFs using reductive triphenylamine frameworks as reducing agent;meanwhile,the triphenylamine unit was oxidized to radical cation structure and affords radical cation COFs with conductivity as high as3.2*10^(-1) S m^(-1).Such a uniform confine palladium nanoparticle on highly conductive COFs makes it an efficient electrocatalyst for four-electron oxygen reduction reaction(4e-ORR),showing excellent activities and fast kinetics with a remarkable half-wave potential(E_(1/2))of 0.865 V and an ultralow Tafel slope of 39.7 mV dec^(-1) in alkaline media even in the absence of extra commercial conductive fillers.The generality of this strategy was proved by preparing the different metal and metal alloy nanoparticles supported on COFs(Au@COF,Pt@COF,AuPd@COF,AgPd@COF,and PtPd@COF)using reductive triphenylamine frameworks as reducing agent.This work not only provides a facile strategy for the fabrication of highly conductive COF supported ORR electrocatalysts,but also sheds new light on the practical application of Zn-air battery.
基金the support from the Fundamental Research Funds for the Central Universities (2022LHJH01-03, 2022ZFJH04, 2022QZJH14)Pioneer R&D Program of Zhejiang Province (2022C03040)+1 种基金the Ecological civilization project, Zhejiang Universitythe support from A Project Supported by Scientific Research Fund of Zhejiang University (XY2022013)。
文摘The electrocatalytic conversion of reactive nitrogen species to ammonia is a promising strategy for efficient NH_(3) synthesis.In this study,we reveal that the hybrid Cu^(+)/Cu~0 interface is catalytically active for electrochemical ammonia synthesis from nitrate reduction.To maintain the hybrid Cu^(+)/Cu~0 state at negative reaction potentials,hydrophilic zeolite is used to modify Cu/Cu_(2)O electrocatalyst,which demonstrates an impressive NH_(3) production rate of 41.65 mg h^(-1) cm^(-2)with ~100% Faradaic efficiency of ammonia synthesis at-0.6 V vs.RHE.In-situ Raman spectroscopy unveil the high activity originates from the zeolite reconstruction at the electrode–electrolyte interface,which protects the valence state of Cu~0/Cu^(+) site under negative potential and promotes electrochemical activity towards NH_(3) synthesis.
基金financially supported by the National Natural Science Foundation of China(Nos.51804116,51772092,51972109)Hunan Provincial Natural Science Foundation of China(Nos.2018JJ3207,2017JJ2103,2019JJ40102,2019JJ50205,2018JJ2149)+1 种基金China Scholarship Councilthe Scientific Research Fund of Hunan Provincial Education Department,China(Nos.18B346,18A315,18B347,19A205)。
文摘Transition metal compound(TMC)/carbon hybrids,as prospering electrocatalyst,have attracted great attention in the field of oxygen reduction reaction(ORR).Their morphology,structure and composition often play a crucial role in determining the ORR performance.In this work,we for the first time report the successful fabrication of porous core-shell Fe_(1-x)S@N,S co-doped carbon(Fe_(1-x)S@NSC-t,t represents etching time)by a novel in-situ self-template induced strategy using Fe3O4 nanospheres and pyrrole as sacrificial self-template.The post-polymerization of pyrrole can be accomplished by the Fe^(3+)released through the etching of Fe_(3)O_(4) by HCl acid.Thus,the etching time has a significant effect on the morphology,structure,composition a nd ORR performance of Fe_(1-x)S@NSC-t.Based on the cha racterizations,we find Fe_(1-x)S@NSC-24 can realize effective and balanced combination of Fe_(1-x)S and NSC,possessing porous core-shell architecture,optimized structure defect,specific surface area and doped heteroatoms configurations(especially for pyridinic N,graphitic N and Fe-N structure).These features thus lead to outstanding catalytic activity and cycling stability towards ORR.Our work provides a good guidance on the design of TMC/carbon-based electrodes with unique stable morphology and optimized structure and composition.
基金Financial support from Chinese Academy of Sciences (CMS-CX200105) is gratefully acknow- ledged.
文摘Resol type phenolic resin/silver nanocomposite was prepared by in-situ reduction method, in which the curing of phenolic resin and the formation of silver nano-particles took place simultaneously. The silver ions were reduced completely to silver nanoparticles, which were dispersed homogeneously in the resin matrix with narrow size distribution.
基金financial supports from National Natural Science Foundation of China(Nos.91741105,22006120)Program for Innovation Team Building at Institutions of Higher Education in Chongqing(No.CXTDX201601011)Chongqing Municipal Natural Science Foundation(No.cstc2018jcyjAX0625).
文摘Electrochemical nitrate reduction reaction (NITRR) is regarded as a “two birds-one stone” method for the treatment of nitrate contaminant in polluted water and the synthesis of valuable ammonia, which is retarded by the lack of highly reactive and selective electrocatalysts .Herein, for the first time, nickel foam supported Co_(4) N was designed as a high-performance NITRR catalyst by an in-situ nonmetal leaching-induced strategy.At the optimal potential, the Co_(4) N/NF catalyst achieves ultra-high Faraday efficiency and NH_(3) selectivity of 95.4% and 99.4%, respectively.Ex situ X-ray absorption spectroscopy (XAS), together with other experiments powerfully reveal that the nitrogen vacancies produced by nitrogen leaching are stable and play a key role in boosting nitrate reduction to ammonia.Theoretical calculations confirm that Co_(4) N with abundant nitrogen vacancies can optimize the adsorption energies of NO_(3)^(-) and intermediates, lower the free energy (Δ G ) of the potential-determining step (*NH_(3) to NH_(3) ) and inhibit the formation of N-containing byproducts.In addition, we also conclude that the nitrogen vacancies can stabilize the adsorbed hydrogen, making H_(2) quite difficult to produce, and lowering ΔG from *NO to *NOH, which facilitates the selective reduction of nitrate.This study reveals significant insights about the in-situ nonmetal leaching to enhance the NITRR activity.
基金supported by grants from the Taishan Scholars Young Experts Program (No.tsqn202103080)The National Natural Science Foundation of China (No.51978311)+1 种基金the Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program (No.2021KJ043)the Research Grants Council of the Hong Kong SAR Government (Nos.17210219 and T21-711/16-R)。
文摘Resource recycling from waste-water and sludge is an important part of the 14th Five-Year Plan in China.The emerging titanium-based coagulants have drawn growing attentions due to their strong coagulation capability in water purification and value-added Ti-loaded sludge production.Management and recovery of the high value-added sludge into functional nanomaterials is highly significant for both sludge reduction and environmental remediation.The present study was carried out to investigate the recycle of the coagulated Ti-loaded sludge to produce functional C/TiO_(2)composites as the anode materials for lithium-ion batteries(LIBs).It is the first time that the application of the Ti-loaded wastewater sludge derived C/TiO_(2)was evaluated for LIBs.The experimental results showed that the carbon coating through in-situ carbonization of the sludge produced the C/TiO_(2)composites with a high specific surface area,stable structural integrity,and excellent electrochemical properties that would facilitate Li+diffusion in long-term LIBs usage.The C/TiO_(2)composites calcinated from the polytitanium sulfate-coagulated sludge at 800℃(N_(2))exhibited the best electrochemical performance during the cycling tests(601 m Ah/g at 100 m A/g after 200 cycles).The research work demonstrates the promising prospect of the recycle and value-added utilization of the Ti-loaded sludge in the production of high-performance C/TiO_(2)composites for energy storage applications.This study provides a new way for the management and reuse of Ti-loaded waste-sludge.
基金financially supported by the National Natural Science Foundation of China(Nos.22062017 and 22164015)Inner Mongolia Autonomous Region Program for Key Science and Technology(No.2020GG0161)+3 种基金Ordos City Program for Key Science and Technology(No.2022YY003)the Program of Higher-Level Talents of Inner Mongolia University(No.10000-22311201/035)the Research Program of science and technology at Universities of Inner Mongolia Autonomous Region(No.NJZZ23091)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region(No.NMGIRT2210)。
文摘Based on the in-situ self-reduction and chemical stability,graphdiyne(GDY)and graphdiyne oxide(GDYO)are used as trapping agents to investigate the ability for recovering Au^(3+),Ag^+,and Pd^(2+)under different pH values and interfering ions.Under strong acidity at pH=1,these two agents demonstrate high select recovery towards the three precious metal ions,which could be insitu reduced to nanoparticles(NPs).In addition,superparamagnetic Fe_(3)O_(4)NPs are deposited on the surfaces of GDY and GDYO.The magnetic responses enable GDYFe_(3)O_(4)to recover precious metals conveniently and efficiently by the aid of an external magnetic field.This study also confirms the antibacterial activity of the as-recovered NPs deposited on GDY and GDYO against Escherichia coli and Staphylococcus aureus(1×10^(5)colony-forming unit(CFU)·mL^(-1)),and the antibacterial rates are 100%.This strategy of recovering precious metals and subsequently reusing to combat pathogens will be of great significance for environmental remediation and biomedical applications.
基金financially supported by the National Key Technology R&D Program(Nos.2012BAC02B01,2012BAC12B05,2011BAE13B07,and 2011BAC10B02)the National High-Tech Research and Development Program of China(No.2012AA063202)+2 种基金the National Natural Science Foundation of China(Nos.51174247 and51004011)the Science and Technology Program of Guangdong Province,China(No.2010A030200003)the Ph.D.Programs Foundation of the Ministry of Education of China(No.2010000612003)
文摘Oily cold rolling mill （CRM） sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at the same time. The compound methods of ＂vacuum distillation ＋ oxidizing roasting＂ and ＂vacuum distillation ＋ hydrogen reduction＂ were employed for the recycle of oily cold rolling mill sludge. First, the sludge was dynamically vacuum distilled in a rotating furnace at 50 r/rain and 600℃ for 3 h, which removed almost hazardous organic components, obtaining 89.2wt% ferrous resultant. Then, high purity ferric oxide powders （99.2wt%） and reduced iron powders （98.9wt%） were obtained when the distillation residues were oxidized and reduced, respectively. The distillation oil can be used for fuel or chemical feedstock, and the distillation gases can be collected and reused as a fuel.
基金supported by the University of Electronic Science and Technology of China(Y02002010301080)the National Science Foundation of China(51502032)the financial support from Natural Science Foundation of Zhejiang Province(No.LQ14E020003)
文摘Metal-free, heteroatom functionalized carbon-based catalysts have made remarkable progress in recent years in a wide range of applications related to energy storage and energy generation. In this study, high surface area mesoporous ordered sulphur doped carbon materials are obtained via one-pot hydrothermal synthesis of carbon/SBA-15 composite after removal of in-situ synthesized hard template SiO2. 2-thiophenecarboxy acid as sulphur source gives rise to sulphur doping level of 5.5 wt%. Comparing with pristine carbon, the sulphur doped mesoporous ordered carbon demonstrates improved electro-catalytic activity in the oxygen reduction reaction in alkaline solution. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
基金support of the National Key Research and Development Program of China(2017YFB0310403)the National Natural Science Foundation of China(51872260,51390474,91645103)+2 种基金the Ministry of Science and Technology of China(2016YFE0105700)the Environmentally Sustainable Management of Medical Wastes in China(C/V/S/10/251)the Zhejiang Provincial Natural Science Foundation of China(Z4080070,LD19B030001)~~
文摘N2O is a major by-product emitted during low-temperature selective catalytic reduction of NO with NH3(NH3-SCR), which causes a series of serious environmental problems. A full understanding of the N2O formation mechanism is essential to suppress the N2O emission during the low-temperature NH3-SCR, and requires an intensive study of this heterogeneous catalysis process. In this study, we investigated the reaction between NH3 and NO over a Pd/CeO2 catalyst in the absence of O2, using X-ray photoelectron spectroscopy, NH3-temperature-programmed desorption, NO-temperature-programmed desorption, and in-situ Fourier-transform infrared spectroscopy. Our results indicate that the N2O formation mechanism is reaction-temperature-dependent. At temperatures below 250 ℃, the dissociation of HON, which is produced from the reaction between surface H· adatoms and adsorbed NO, is the key process for N2O formation. At temperatures above 250 ℃,the reaction between NO and surface N·, which is produced by NO dissociation, is the only route for N2O formation, and the dissociation of NO is the rate-determining step. Under optimal reaction conditions, a high performance with nearly 100% NO conversion and 100% N2 selectivity could be achieved. These results provide important information to clarify the mechanism of N2O formation and possible suppression of N2 O emission during low-temperature NH3-SCR.
文摘Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quantity was lower than 5 m^3/h,the optimal operation parameters of the three-phase centrifuge are shown as follows: the frequency of the main motor and vice motor was 33 and 30 Hz respectively,and the flocculant flow was 0. 7 m^3/h,while the oily sludge temperature was 55 ℃. Water content in the separated sludge decreased from 98% to lower than 70%,and the goal of reduction and harmless treatment of oily sludge could be achieved,which could provide essential conditions for subsequent resource utilization and could be used to guide industrial production.
