The paper analyzes the definite place of industrial building in the history of urban development. Due to the development of urban economy and the transition of the traditional industrial structure, many historic citie...The paper analyzes the definite place of industrial building in the history of urban development. Due to the development of urban economy and the transition of the traditional industrial structure, many historic cities and towns both at home and abroad have witnessed a large scale "demolition" and abandonment of industrial buildings in urban renewal during last 30 years. Consequently, it has been leading to the discontinuity of urban cultural and historic context. The paper discusses and expounds the clas...展开更多
The current study investigated the value and significance of the existence of the old industrial buildings, as well as the necessity and difficulty to renovate the design. Combined with successful cases, this study an...The current study investigated the value and significance of the existence of the old industrial buildings, as well as the necessity and difficulty to renovate the design. Combined with successful cases, this study analyzed and showed that one should not only deal with the relationship between the original architectural style and construction of modem cities in the process of renovation design of the old industrial building space. More attention should also be paid to create new space to meet the functional requirements of the modem features, and then complete substantial renovation of old industrial building space through the innovative design. In the use of aesthetic innovative design for the renovation of the old industrial building space, people must respect the space of old industrial buildings as the prerequisite of the renovation design. It is needed to expound the local space reconstruction methods and design principles respectively on the basis of respect. And then one should grasp the whole space and make the structured design and reasonable use according to the new space functional requirements of different functional areas. This paper attempted to learn from environmental art study on the renovation of old industrial buildings space and in terms of innovative design. The authors explored the innovative thinking on the renovation design of old industrial building space through the analysis of the reality.展开更多
Because of the high energy demand required to heat a production hall, the aim of this project is to find out whether it is possible to verify the heating consuming process for heating with the standard simplified calc...Because of the high energy demand required to heat a production hall, the aim of this project is to find out whether it is possible to verify the heating consuming process for heating with the standard simplified calculation method [1], especially for cold regions such as Kosice (Slovakia). The energy requirement for heating a case study industrial building was evaluated using measurements and calculations.During the winter period, energy consumption was measured in the selected industrial building according to a validation standard [2]. The building is comprised of two halls. The measurements were analyzed according to the criteria used for validating residential and public buildings, with several regression dependencies taken into account in the resulting evaluation of heating energy consumption. The mathematical dependencies of measured values in real conditions are shown in this paper. In addition, the building’s heating energy demand was calculated according to the Austrian standard [3], ?NORM EN ISO 13790, the simplified calculation method for non-residential buildings. It was investigated whether the measured values could be replicated using this calculation. It was found that the precise definition of the internal heat gains is very important.展开更多
With the progress of urbanization in China,the pace of urban renewal is accelerating.Various factors have prompted the transformation of industrial buildings in the city.Following the transformation,old industrial bui...With the progress of urbanization in China,the pace of urban renewal is accelerating.Various factors have prompted the transformation of industrial buildings in the city.Following the transformation,old industrial buildings have shown a new look with diversification and modernization.This article briefly describes contemporary China.The background of industrial building renovation and the analysis of the redevelopment and utilization modes as well as renovation strategies in conjunction with case studies provide a summary and enlightenment for the renovation of industrial heritage buildings in the city.展开更多
The acceleration of industrialization worsening indoor environments of industrial buildings has drawn more attention in recent years.Natural ventilation can improve indoor air quality(IAQ)and reduce carbon emissions.T...The acceleration of industrialization worsening indoor environments of industrial buildings has drawn more attention in recent years.Natural ventilation can improve indoor air quality(IAQ)and reduce carbon emissions.To evaluate gaseous pollutant levels in industrial buildings for the development of buoyancy-driven natural ventilation,two theoretical models of pollutant flushing(Model I and Model II)are developed based on the existing thermal stratification theory in combination with the mixing characteristics of lower pollutant.The results show that indoor pollutant flushing is mainly dependent on the pollution source intensity and effective ventilation area.The mixing characteristics of lower pollutant has an important effect on pollutant stratification and evolution during ventilation,but it does not change the prediction results at steady state.When the dimensionless pollution source intensity is larger than 1,the pollution source should be cleaned up or other ventilation methods should be used instead to improve IAQ.In addition,the comparisons between Model I and Model II on instantaneous pollutant concentration are significantly influenced by the pollution source intensity,and the actual pollutant concentration is more likely to be between the predicted values of Model I and Model II.To reduce pollutant concentration to a required level,the pollution source intensity should be in a certain range.The theoretical models as well as the necessary conditions for ventilation effectiveness obtained can be used for the ventilation optimization design of industrial buildings.展开更多
Energy consumption of industrial buildings has remained continuously high,and the environmental quality requirements are also constantly improving.Only by improving industrial environmental control technology based on...Energy consumption of industrial buildings has remained continuously high,and the environmental quality requirements are also constantly improving.Only by improving industrial environmental control technology based on the transport mechanism of the pollution,can the energy consumption of industrial building environmental control be further reduced,and the environmental quality of industrial buildings can be improved as well.Therefore,after verifying the numerical simulation by experiments,this study uses a self-label method to investigate the spatio-temporal distribution of gaseous pollutants from multiple time-series sources in industrial plants with different length-span ratios.The results show that,the polluted flow in plants with different aspect ratios have different flow patterns:(i)the,,Back-mixingw flow pattern occurs when the ratio of ventilation rate 6 and polluted flow rate at the exhaust height b is less than 1,i.e.,G/L_(p)<1,and(ii)the"One-way"flow pattern occurs when G/L_(p)>1.For plants with the"Back-mixing"pattern,the following source pollutants enter a density stratified environment induced by the retained pre-source pollutants.The flow of following source pollutants released at the same intensity as the precursor source can reach the roof,while those with low velocity and density difference may be blocked during the ascending process.The maximum height zm of the flow of the following source is related to both the initial Froude number Fr_(o)of the following source and the unsteady vertical density gradient of the fluid in the indoor environment dpa/dz.For plants with the,,One-way,/pattern,the flow from the following source enters into an environment with approximately uniform density.Under the condition of positive buoyancy,design parameters of ventilation corresponding to the vicinity of G/L_(p)=1 may be the optimal solution for safety and energy conservation.展开更多
This paper describes economical strategies to design blast resistant electrical substations and control buildings that are commonly used at industrial plants.Limited literature addressed design aspects for this class ...This paper describes economical strategies to design blast resistant electrical substations and control buildings that are commonly used at industrial plants.Limited literature addressed design aspects for this class of buildings.Furthermore,little guidelines are available in practice to regulate this type of steel construction.The first part of the paper overviews the architectural and structural layouts of electrical buildings.Blast resistance requirements for occupied control buildings are also discussed.Simplified multiple degrees of freedom(MDOF)dynamic model is also illustrated that can be utilized for analysis of the blast resistant buildings.The economical aspects and cost savings resulting in using mobile blast resistant buildings are discussed.The article also highlights the engineering challenges that are encountered in design of mobile electrical facilities.The transportation procedure and design requirements are briefly described.Guidelines are proposed to calculate the center of mass of the building combined with interior equipment.The proposed design concept for electrical and control buildings is cost effective and can be implemented in industry to reduce projects cost.展开更多
The aim of this paper is to define the nature, present the possibilities, and discuss the problems of using human resource controlling in small and medium-sized building companies. This paper is based on the assumptio...The aim of this paper is to define the nature, present the possibilities, and discuss the problems of using human resource controlling in small and medium-sized building companies. This paper is based on the assumption that expedient human resource controlling is an effective human resource management tool that achieves the required performance of employees and expected competitiveness of a building company. This paper uses the results of a questionnaire survey conducted in November 2013 to analyze human resource management in building companies in the Czech Republic and specify the organization and conditions of human resource management. Some 81 small （less than 50 employees） and 66 medium-sized （50-249 employees） building companies operating in the Czech Republic took part in the questionnaire survey. The results of the questionnaire survey showed the lack of concept and random nature of human resource management in most small and medium-sized building companies. Of course, in terms of the present economic trend, it is above all important for small and medium-sized companies to develop their adaptability to the building market and to be able to deal with a variety of construction works. It is effective human resource management supported by expedient human resources that serves this purpose.展开更多
This paper summarizes the results of the international questionnaire survey which took place at the start of 2013 in order to examine, judge, and compare the implemented concept and procedures of human resource manage...This paper summarizes the results of the international questionnaire survey which took place at the start of 2013 in order to examine, judge, and compare the implemented concept and procedures of human resource management in the questioned building companies operating in the Visegrad Four countries （the Czech Republic, Hungary, Poland, and the Slovak Republic） and the Federal Republic of Germany, and proposes an optimal approach to human resource management in the context of the current and expected economic development. The questionnaire survey was based on the assumption that effective human resource management is a condition of the successful function of each building company and that human resource management is that area of management which distinguishes the successful building companies from the unsuccessful ones. In total, 202 companies from the Czech Republic, 105 companies from Hungary, 100 companies from Poland, 102 companies from the Slovak Republic, and 99 companies from the Federal Republic of Germany took part in the questionnaire survey. The results of the questionnaire survey showed that among the building companies questioned in individual countries, there was no substantial difference in the overall concept and in the partial procedures of human resource management. The implemented concept and procedures in the questioned building companies show significant merits and surprising shortcomings, whereas it is difficult to prove an unequivocal connection between the efficiency of human resource management and the success of building companies. This relationship is determined by a series of other political, economic, legal, social, cultural, technical, demographic, and natural effects which are not related to the efficiency of human resource management or to the performance of the workforce of building companies.展开更多
Thanks to the efforts on prospecting and exploiting of salt lakes,new cities and towns have grown up in Qaidam Basin,which used to be untraversed deserts and saline and alkaline lands.And these progress have made great
China’s building materials industry experienced great development in 1993 with rapid increases in production and record output and profits. The industry produced 360 million tons of cement, 96.163 million cases of pl...China’s building materials industry experienced great development in 1993 with rapid increases in production and record output and profits. The industry produced 360 million tons of cement, 96.163 million cases of plate glass, 20.4 million pieces of sanitation ceramics and 173 million square metres of construction ceramics, showing rises of 12.89, 12.83, 123.8 and 127 percent respectively over the previous year. The output of cement and展开更多
Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY...Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY） and 31.29 million tons （up 15% YOY）,展开更多
Since 1994, a vigourous development has emerged in China’s construction thanks to the remarkable progress of our economicreform and the continuous, stable and healthy growth of the national economy The national key c...Since 1994, a vigourous development has emerged in China’s construction thanks to the remarkable progress of our economicreform and the continuous, stable and healthy growth of the national economy The national key construction projects have been speeded up with the improved completion of investment plans and capital funds, compared to 1993. The macro control of real estate has展开更多
Tender price indices (TPI) remain an optimum process for predicting tender prices. There have been several indices’ developments in the Ghanaian Building Industry (GBI) to help in cost management practices, for insta...Tender price indices (TPI) remain an optimum process for predicting tender prices. There have been several indices’ developments in the Ghanaian Building Industry (GBI) to help in cost management practices, for instance, building cost indices, and material indices among others. Notwithstanding, there are no indices for forecasting tender price at the design stage of building projects in the Ghanaian Building Industry. The motivation of this study is to develop tender price indices that would facilitate easy prediction of the initial cost of building projects. Through a thorough literature review and secondary data collection, the index was formulated using Laspeyres with Excel spreadsheet for the actual index. The variables considered include preliminaries and measured work sections which include the substructure, concrete work, reinforcement, masonry, lining/sheathing, window/door/stairs, metalwork, surface finishes, sanitary appliances/fitting and electrical supply/power light system of the Bills of Quantities. The finding of the study shows that on average there is a change in price of about 4.42 per cent within the eight-year period from 2008 to 2016. The study has developed tender price indices for the Ghanaian Building industry for the facilitation of the easy prediction of the tender prices at the initial design stage, however, the indices have an error margin of ±3. The development of these indices will serve as the basis for further development of other indices in GBI such as locational indices and value-based indices for effective cost management practices.展开更多
In 2013, China＇s outputs of cement and flat glass were 2. 414 billion tons and 778.98 million weight cases, increasing by 9.6% and 11.2% YOY, respectively.
JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and qualit...JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products展开更多
Based on the national strategy of"new urbanization",from the perspective of urban and rural integration,industrial interaction,economy and intensification,this paper proposes to vigorously promote the indust...Based on the national strategy of"new urbanization",from the perspective of urban and rural integration,industrial interaction,economy and intensification,this paper proposes to vigorously promote the industrialization planning of urban and rural housing based on SI system,do a good job in the production of building structural parts from the perspective of building industrialization,extend to the internal filling parts,and do a good job in the internal filling system from the perspective of housing industrialization.At the moment of"Rural Revitalization"strategy,we should first develop the SI system multi-storey industrialized housing to meet the needs of rural areas.At the same time,we put forward the development path of China's urban and rural housing industrialization.展开更多
The Industrialized Building System （IBS） was recently introduced to minimize the time and cost of project construction. Accordingly, ensuring the integration of the connection of precast components in IBS structures...The Industrialized Building System （IBS） was recently introduced to minimize the time and cost of project construction. Accordingly, ensuring the integration of the connection of precast components in IBS structures is an important factor that ensures stability of buildings subjected to dynamic loads from earthquakes, vehicles, and machineries. However, structural engineers still lack knowledge on the proper connection and detailed joints o fiBS structure construction. Therefore, this study proposes a special precast concrete wall-to-wall connection system for dynamic loads that resists multidirectional imposed loads and reduces vibration effects （PI2014701723）. This system is designed to connect two adjacent precast wall panels by using two steel U-shaped channels （i.e., male and female joints）. During casting, each joint is adapted for incorporation into a respective wall panel after considering the following conditions： one side of the steel channel opens into the thickness face of the panel; a U-shaped rubber is implemented between the two channels to dissipate the vibration effect; and bolts and nuts are used to create an extension between the two U-shaped male and female steel channels. The developed finite element model of the precast wall is subjected to cyclic loads to evaluate the performance of the proposed connection during an imposed dynamic load. Connection performance is then compared with conventional connections based on the energy dissipation, stress, deformation, and concrete damage in the plastic range. The proposed precast connection is capable of exceeding the energy absorption of precast walls subjected to dynamic load, thereby improving its resistance behavior in all principal directions.展开更多
文摘The paper analyzes the definite place of industrial building in the history of urban development. Due to the development of urban economy and the transition of the traditional industrial structure, many historic cities and towns both at home and abroad have witnessed a large scale "demolition" and abandonment of industrial buildings in urban renewal during last 30 years. Consequently, it has been leading to the discontinuity of urban cultural and historic context. The paper discusses and expounds the clas...
文摘The current study investigated the value and significance of the existence of the old industrial buildings, as well as the necessity and difficulty to renovate the design. Combined with successful cases, this study analyzed and showed that one should not only deal with the relationship between the original architectural style and construction of modem cities in the process of renovation design of the old industrial building space. More attention should also be paid to create new space to meet the functional requirements of the modem features, and then complete substantial renovation of old industrial building space through the innovative design. In the use of aesthetic innovative design for the renovation of the old industrial building space, people must respect the space of old industrial buildings as the prerequisite of the renovation design. It is needed to expound the local space reconstruction methods and design principles respectively on the basis of respect. And then one should grasp the whole space and make the structured design and reasonable use according to the new space functional requirements of different functional areas. This paper attempted to learn from environmental art study on the renovation of old industrial buildings space and in terms of innovative design. The authors explored the innovative thinking on the renovation design of old industrial building space through the analysis of the reality.
基金the project ITMS“26220220050”—Architectural,Structural,technological and economical aspects of energy efficiency building designfinancially supported by the EU structural resources within operative program of research and development OPVaV-2008/2.2/01-SORO.
文摘Because of the high energy demand required to heat a production hall, the aim of this project is to find out whether it is possible to verify the heating consuming process for heating with the standard simplified calculation method [1], especially for cold regions such as Kosice (Slovakia). The energy requirement for heating a case study industrial building was evaluated using measurements and calculations.During the winter period, energy consumption was measured in the selected industrial building according to a validation standard [2]. The building is comprised of two halls. The measurements were analyzed according to the criteria used for validating residential and public buildings, with several regression dependencies taken into account in the resulting evaluation of heating energy consumption. The mathematical dependencies of measured values in real conditions are shown in this paper. In addition, the building’s heating energy demand was calculated according to the Austrian standard [3], ?NORM EN ISO 13790, the simplified calculation method for non-residential buildings. It was investigated whether the measured values could be replicated using this calculation. It was found that the precise definition of the internal heat gains is very important.
文摘With the progress of urbanization in China,the pace of urban renewal is accelerating.Various factors have prompted the transformation of industrial buildings in the city.Following the transformation,old industrial buildings have shown a new look with diversification and modernization.This article briefly describes contemporary China.The background of industrial building renovation and the analysis of the redevelopment and utilization modes as well as renovation strategies in conjunction with case studies provide a summary and enlightenment for the renovation of industrial heritage buildings in the city.
基金This work is supported by the National Key Research and Development Program(No.2018YFC0705305)the Fundamental Research Funds for the Central University of Donghua University(No.2232017A-09).
文摘The acceleration of industrialization worsening indoor environments of industrial buildings has drawn more attention in recent years.Natural ventilation can improve indoor air quality(IAQ)and reduce carbon emissions.To evaluate gaseous pollutant levels in industrial buildings for the development of buoyancy-driven natural ventilation,two theoretical models of pollutant flushing(Model I and Model II)are developed based on the existing thermal stratification theory in combination with the mixing characteristics of lower pollutant.The results show that indoor pollutant flushing is mainly dependent on the pollution source intensity and effective ventilation area.The mixing characteristics of lower pollutant has an important effect on pollutant stratification and evolution during ventilation,but it does not change the prediction results at steady state.When the dimensionless pollution source intensity is larger than 1,the pollution source should be cleaned up or other ventilation methods should be used instead to improve IAQ.In addition,the comparisons between Model I and Model II on instantaneous pollutant concentration are significantly influenced by the pollution source intensity,and the actual pollutant concentration is more likely to be between the predicted values of Model I and Model II.To reduce pollutant concentration to a required level,the pollution source intensity should be in a certain range.The theoretical models as well as the necessary conditions for ventilation effectiveness obtained can be used for the ventilation optimization design of industrial buildings.
基金This work was supported by the National Key Research and Development Program(No.2018YFC0705300).
文摘Energy consumption of industrial buildings has remained continuously high,and the environmental quality requirements are also constantly improving.Only by improving industrial environmental control technology based on the transport mechanism of the pollution,can the energy consumption of industrial building environmental control be further reduced,and the environmental quality of industrial buildings can be improved as well.Therefore,after verifying the numerical simulation by experiments,this study uses a self-label method to investigate the spatio-temporal distribution of gaseous pollutants from multiple time-series sources in industrial plants with different length-span ratios.The results show that,the polluted flow in plants with different aspect ratios have different flow patterns:(i)the,,Back-mixingw flow pattern occurs when the ratio of ventilation rate 6 and polluted flow rate at the exhaust height b is less than 1,i.e.,G/L_(p)<1,and(ii)the"One-way"flow pattern occurs when G/L_(p)>1.For plants with the"Back-mixing"pattern,the following source pollutants enter a density stratified environment induced by the retained pre-source pollutants.The flow of following source pollutants released at the same intensity as the precursor source can reach the roof,while those with low velocity and density difference may be blocked during the ascending process.The maximum height zm of the flow of the following source is related to both the initial Froude number Fr_(o)of the following source and the unsteady vertical density gradient of the fluid in the indoor environment dpa/dz.For plants with the,,One-way,/pattern,the flow from the following source enters into an environment with approximately uniform density.Under the condition of positive buoyancy,design parameters of ventilation corresponding to the vicinity of G/L_(p)=1 may be the optimal solution for safety and energy conservation.
文摘This paper describes economical strategies to design blast resistant electrical substations and control buildings that are commonly used at industrial plants.Limited literature addressed design aspects for this class of buildings.Furthermore,little guidelines are available in practice to regulate this type of steel construction.The first part of the paper overviews the architectural and structural layouts of electrical buildings.Blast resistance requirements for occupied control buildings are also discussed.Simplified multiple degrees of freedom(MDOF)dynamic model is also illustrated that can be utilized for analysis of the blast resistant buildings.The economical aspects and cost savings resulting in using mobile blast resistant buildings are discussed.The article also highlights the engineering challenges that are encountered in design of mobile electrical facilities.The transportation procedure and design requirements are briefly described.Guidelines are proposed to calculate the center of mass of the building combined with interior equipment.The proposed design concept for electrical and control buildings is cost effective and can be implemented in industry to reduce projects cost.
文摘The aim of this paper is to define the nature, present the possibilities, and discuss the problems of using human resource controlling in small and medium-sized building companies. This paper is based on the assumption that expedient human resource controlling is an effective human resource management tool that achieves the required performance of employees and expected competitiveness of a building company. This paper uses the results of a questionnaire survey conducted in November 2013 to analyze human resource management in building companies in the Czech Republic and specify the organization and conditions of human resource management. Some 81 small （less than 50 employees） and 66 medium-sized （50-249 employees） building companies operating in the Czech Republic took part in the questionnaire survey. The results of the questionnaire survey showed the lack of concept and random nature of human resource management in most small and medium-sized building companies. Of course, in terms of the present economic trend, it is above all important for small and medium-sized companies to develop their adaptability to the building market and to be able to deal with a variety of construction works. It is effective human resource management supported by expedient human resources that serves this purpose.
文摘This paper summarizes the results of the international questionnaire survey which took place at the start of 2013 in order to examine, judge, and compare the implemented concept and procedures of human resource management in the questioned building companies operating in the Visegrad Four countries （the Czech Republic, Hungary, Poland, and the Slovak Republic） and the Federal Republic of Germany, and proposes an optimal approach to human resource management in the context of the current and expected economic development. The questionnaire survey was based on the assumption that effective human resource management is a condition of the successful function of each building company and that human resource management is that area of management which distinguishes the successful building companies from the unsuccessful ones. In total, 202 companies from the Czech Republic, 105 companies from Hungary, 100 companies from Poland, 102 companies from the Slovak Republic, and 99 companies from the Federal Republic of Germany took part in the questionnaire survey. The results of the questionnaire survey showed that among the building companies questioned in individual countries, there was no substantial difference in the overall concept and in the partial procedures of human resource management. The implemented concept and procedures in the questioned building companies show significant merits and surprising shortcomings, whereas it is difficult to prove an unequivocal connection between the efficiency of human resource management and the success of building companies. This relationship is determined by a series of other political, economic, legal, social, cultural, technical, demographic, and natural effects which are not related to the efficiency of human resource management or to the performance of the workforce of building companies.
文摘Thanks to the efforts on prospecting and exploiting of salt lakes,new cities and towns have grown up in Qaidam Basin,which used to be untraversed deserts and saline and alkaline lands.And these progress have made great
文摘China’s building materials industry experienced great development in 1993 with rapid increases in production and record output and profits. The industry produced 360 million tons of cement, 96.163 million cases of plate glass, 20.4 million pieces of sanitation ceramics and 173 million square metres of construction ceramics, showing rises of 12.89, 12.83, 123.8 and 127 percent respectively over the previous year. The output of cement and
文摘Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY） and 31.29 million tons （up 15% YOY）,
文摘Since 1994, a vigourous development has emerged in China’s construction thanks to the remarkable progress of our economicreform and the continuous, stable and healthy growth of the national economy The national key construction projects have been speeded up with the improved completion of investment plans and capital funds, compared to 1993. The macro control of real estate has
文摘Tender price indices (TPI) remain an optimum process for predicting tender prices. There have been several indices’ developments in the Ghanaian Building Industry (GBI) to help in cost management practices, for instance, building cost indices, and material indices among others. Notwithstanding, there are no indices for forecasting tender price at the design stage of building projects in the Ghanaian Building Industry. The motivation of this study is to develop tender price indices that would facilitate easy prediction of the initial cost of building projects. Through a thorough literature review and secondary data collection, the index was formulated using Laspeyres with Excel spreadsheet for the actual index. The variables considered include preliminaries and measured work sections which include the substructure, concrete work, reinforcement, masonry, lining/sheathing, window/door/stairs, metalwork, surface finishes, sanitary appliances/fitting and electrical supply/power light system of the Bills of Quantities. The finding of the study shows that on average there is a change in price of about 4.42 per cent within the eight-year period from 2008 to 2016. The study has developed tender price indices for the Ghanaian Building industry for the facilitation of the easy prediction of the tender prices at the initial design stage, however, the indices have an error margin of ±3. The development of these indices will serve as the basis for further development of other indices in GBI such as locational indices and value-based indices for effective cost management practices.
文摘In 2013, China＇s outputs of cement and flat glass were 2. 414 billion tons and 778.98 million weight cases, increasing by 9.6% and 11.2% YOY, respectively.
文摘JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products
基金On March 15,2021,supported by the 2019 soft science project of Shaanxi Provincial Science and Technology Department,research on the development path and countermeasures of Shaanxi urban and rural housing industrialization(Project No.:2019krm037).
文摘Based on the national strategy of"new urbanization",from the perspective of urban and rural integration,industrial interaction,economy and intensification,this paper proposes to vigorously promote the industrialization planning of urban and rural housing based on SI system,do a good job in the production of building structural parts from the perspective of building industrialization,extend to the internal filling parts,and do a good job in the internal filling system from the perspective of housing industrialization.At the moment of"Rural Revitalization"strategy,we should first develop the SI system multi-storey industrialized housing to meet the needs of rural areas.At the same time,we put forward the development path of China's urban and rural housing industrialization.
基金financial support from the Housing Research Center of UPMNAEIM Company
文摘The Industrialized Building System （IBS） was recently introduced to minimize the time and cost of project construction. Accordingly, ensuring the integration of the connection of precast components in IBS structures is an important factor that ensures stability of buildings subjected to dynamic loads from earthquakes, vehicles, and machineries. However, structural engineers still lack knowledge on the proper connection and detailed joints o fiBS structure construction. Therefore, this study proposes a special precast concrete wall-to-wall connection system for dynamic loads that resists multidirectional imposed loads and reduces vibration effects （PI2014701723）. This system is designed to connect two adjacent precast wall panels by using two steel U-shaped channels （i.e., male and female joints）. During casting, each joint is adapted for incorporation into a respective wall panel after considering the following conditions： one side of the steel channel opens into the thickness face of the panel; a U-shaped rubber is implemented between the two channels to dissipate the vibration effect; and bolts and nuts are used to create an extension between the two U-shaped male and female steel channels. The developed finite element model of the precast wall is subjected to cyclic loads to evaluate the performance of the proposed connection during an imposed dynamic load. Connection performance is then compared with conventional connections based on the energy dissipation, stress, deformation, and concrete damage in the plastic range. The proposed precast connection is capable of exceeding the energy absorption of precast walls subjected to dynamic load, thereby improving its resistance behavior in all principal directions.
