An exquisite mesostructure model was presented to predict the effective elastic modulus of concrete,in which concrete is realized as a four-phase composite material consisting of coarse aggregates,mortar matrix,interf...An exquisite mesostructure model was presented to predict the effective elastic modulus of concrete,in which concrete is realized as a four-phase composite material consisting of coarse aggregates,mortar matrix,interfacial transition zone(ITZ),and initial defects.With the three-dimensional(3D)finite element(FE)simulation,the highly heterogeneous composite elastic behavior of concrete was modeled,and the predicted results were compared with theoretical estimations for validation.Monte Carlo(MC)simulations were performed with the proposed mesostructure model to investigate the various factors of initial defects influencing the elastic modulus of concrete,such as the shape and concentration(pore volume fraction or crack density)of microspores and microcracks.It is found that the effective elastic modulus of concrete decreases with the increase of initial defects concentration,while the distribution and shape characteristics also exert certain influences due to the stress concentration caused by irregular inclusion shape.展开更多
The meniscus shell plays an important role in slab quality and process operation for continuously cast steel. One decisive reason is initial solidifying shell and growing dendrite under the mechanical stress caused by...The meniscus shell plays an important role in slab quality and process operation for continuously cast steel. One decisive reason is initial solidifying shell and growing dendrite under the mechanical stress caused by mold oscil- lation and liquid steel flow to generate disturbance of casting. The mechanical state of meniscus shell was analyzed using mathematical models in combination with thermo-physical properties and flow rate of steel to shed light on the formation of initial defects. The results show that the mold oscillation is a critical factor on the initial crack formation because the periodic stress makes the shell bending. The formed crack may also expand and propagate due to the fol- lowing secondary cooling and straightening behavior. The primary dendrite has high possibility to be broken by fluid flow in the solidification front to lead to the non-uniform thickness of solidifying shell. The inter-dendrite bridging is also likely to be formed to produce other internal defects, such as air hole and solute enrichment in the residual mol- ten steel located in the bridging area.展开更多
To analyze fracture mechanism of propellant grain and study the mechanical properties of propellant grain, the press and fracture processes of propellant grain with and without initial defects are modeled using the di...To analyze fracture mechanism of propellant grain and study the mechanical properties of propellant grain, the press and fracture processes of propellant grain with and without initial defects are modeled using the discrete element method. On the basis of the appropriate constitutive relationships, the discrete element model of the propellant grain was established. Compared with experimental measurements, the micro-parameters of the bonded-particle model of the propellant grain under unconfined uniaxial compression tests were calibrated. The propellant grains without initial defects, with initial surface defects, and with initial internal defects were studied numerically through a series of unconfined uniaxial compression tests. Results show that the established discrete element model is an efficient tool to study the press and fracture processes of the propellant grain. The fracture process of the propellant grain without initial defects can be divided into the elastic deformation phase, crack initiation phase, crack stable propagation phase, and crack unstable propagation phase. The fracture mechanism of this grain is the global shear failure along the direction of the maximum shear stress. Initial defects have significant effects on both the fracture mechanism and peak strength of the propellant grain. The major fracture mechanism of the propellant grain with initial surface defects is local shear failure, whereas that of the propellant grain with initial internal defects is global tensile failure. Both defects weaken the peak strengths of the propellant grain. Therefore, the carrying and filling process of the propellant grain needs to minimize initial defects as far as possible.展开更多
基金Founded by the National Natural Science Foundation of China(No.42002287)the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(No.CUG2106335)。
文摘An exquisite mesostructure model was presented to predict the effective elastic modulus of concrete,in which concrete is realized as a four-phase composite material consisting of coarse aggregates,mortar matrix,interfacial transition zone(ITZ),and initial defects.With the three-dimensional(3D)finite element(FE)simulation,the highly heterogeneous composite elastic behavior of concrete was modeled,and the predicted results were compared with theoretical estimations for validation.Monte Carlo(MC)simulations were performed with the proposed mesostructure model to investigate the various factors of initial defects influencing the elastic modulus of concrete,such as the shape and concentration(pore volume fraction or crack density)of microspores and microcracks.It is found that the effective elastic modulus of concrete decreases with the increase of initial defects concentration,while the distribution and shape characteristics also exert certain influences due to the stress concentration caused by irregular inclusion shape.
基金Item Sponsored by National Natural Science Foundation of China(51004031)Fundamental Research Funds for the Central Universities of China(N140205002)National Outstanding Young Scientist Foundation of China(50925415)
文摘The meniscus shell plays an important role in slab quality and process operation for continuously cast steel. One decisive reason is initial solidifying shell and growing dendrite under the mechanical stress caused by mold oscil- lation and liquid steel flow to generate disturbance of casting. The mechanical state of meniscus shell was analyzed using mathematical models in combination with thermo-physical properties and flow rate of steel to shed light on the formation of initial defects. The results show that the mold oscillation is a critical factor on the initial crack formation because the periodic stress makes the shell bending. The formed crack may also expand and propagate due to the fol- lowing secondary cooling and straightening behavior. The primary dendrite has high possibility to be broken by fluid flow in the solidification front to lead to the non-uniform thickness of solidifying shell. The inter-dendrite bridging is also likely to be formed to produce other internal defects, such as air hole and solute enrichment in the residual mol- ten steel located in the bridging area.
基金The National Key Research and Development Program of China(No.2018YFD1100401-04)the National Natural Science Foundation of China(No.11772091)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions(No.CE01-2)the Open Research Fund Program of Jiangsu Key Laboratory of Engineering M echanics(No.LEM16A08)
文摘To analyze fracture mechanism of propellant grain and study the mechanical properties of propellant grain, the press and fracture processes of propellant grain with and without initial defects are modeled using the discrete element method. On the basis of the appropriate constitutive relationships, the discrete element model of the propellant grain was established. Compared with experimental measurements, the micro-parameters of the bonded-particle model of the propellant grain under unconfined uniaxial compression tests were calibrated. The propellant grains without initial defects, with initial surface defects, and with initial internal defects were studied numerically through a series of unconfined uniaxial compression tests. Results show that the established discrete element model is an efficient tool to study the press and fracture processes of the propellant grain. The fracture process of the propellant grain without initial defects can be divided into the elastic deformation phase, crack initiation phase, crack stable propagation phase, and crack unstable propagation phase. The fracture mechanism of this grain is the global shear failure along the direction of the maximum shear stress. Initial defects have significant effects on both the fracture mechanism and peak strength of the propellant grain. The major fracture mechanism of the propellant grain with initial surface defects is local shear failure, whereas that of the propellant grain with initial internal defects is global tensile failure. Both defects weaken the peak strengths of the propellant grain. Therefore, the carrying and filling process of the propellant grain needs to minimize initial defects as far as possible.