The present study focuses on the formulation of new composite consisting of plaster and raffia vinifera particle (RVP) with the purpose to reducing energy consumption. The aim of this study is to test this new compoun...The present study focuses on the formulation of new composite consisting of plaster and raffia vinifera particle (RVP) with the purpose to reducing energy consumption. The aim of this study is to test this new compound as an insulating eco-material in building in a tropical climate. The composites samples were developed by mixing plaster with raffia vinifera particles (RVP) using three different sizes (1.6 mm, 2.5 mm and 4 mm). The effects of four different RVP incorporations rates (i.e., 0wt%, 5wt%;10wt%;15wt%) on physical, thermal, mechanicals properties of the composites were investigated. In addition, the use of the raffia vinifera particles and plaster based composite material as building envelopes thermal insulation material is studied by the habitable cell thermal behavior instrumentation. The results indicate that the incorporation of raffia vinifera particle leads to improve the new composite physical, mechanical and thermal properties. And the parametric analysis reveals that the sampling rate and the size of raffia vinifera particles are the most decisive factor to impact these properties, and to decreases in the thermal conductivity which leads to an improvement to the thermal resistance and energy savings. The best improvement of plaster composite was obtained at the raffia vinifera particles size between 2.5 and 4.0 mm loading of 5wt% (C95P5R) with a good ratio of thermo-physical-mechanical properties. Additionally, the habitable cell experimental thermal behavior, with the new raffia vinifera particles and plaster-based composite as thermal insulating material for building walls, gives an average damping of 4°C and 5.8°C in the insulated house interior environment respectively for cold and hot cases compared to the outside environment and the uninsulated house interior environment. The current study highlights that this mixture gives the new composite thermal insulation properties applicable in the eco-construction of habitats in tropical environments.展开更多
As socioeconomic development continues,the issue of building energy consumption has attracted significant attention,and improving the thermal insulation performance of buildings has become a crucial strategic measure....As socioeconomic development continues,the issue of building energy consumption has attracted significant attention,and improving the thermal insulation performance of buildings has become a crucial strategic measure.Simultaneously,the application of solid waste in insulation materials has also become a hot topic.This paper reviews the sources and classifications of solid waste,focusing on research progress in its application as insulation materials in the domains of daily life,agriculture,and industry.The research shows that incorporating household solid waste materials,such as waste glass,paper,and clothing scraps into cementitious thermal insulation can significantly reduce the thermal conductivity of the materials,leading to excellent thermal insulation properties.Insulation materials prepared from agricultural solid waste,such as barley straw,corn stalk,chicken feather,and date palm fibers,possess characteristics of lightweight and strong thermal insulation.Industrial solid waste,including waste tires,iron tailings,and coal bottom ash,can also be utilized in the preparation of insulation materials.These innovative applications not only have positive environmental significance by reducing waste emissions and resource consumption,but also provide efficient and sustainable insulation solutions for the construction industry.However,to further optimize the mix design and enhance the durability of insulation materials,continuous research is required to investigate the mechanisms through which solid waste impacts the performance of insulation materials.展开更多
Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating...Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating refractories were prepared by the molten salt method with high silica magnesite and tertiary talc ore as raw materials by pretreating them to get light burnt magnesia and talc,and NaCl molten salt as the reaction medium.The effects of the NaCl addition,the sintering temperature,the holding time and the raw material ratio on the sample preparation were studied.The results show that when the NaCl addition is 20% of the mass of light burnt magnesia and talc mixture,the sintering temperature is 1 200 ℃,the holding time is 6 h,and m(light burnt magnesia):m(talc)=5:5,the sample has the optimal comprehensive properties:the bulk density of 1.46 g·cm^(-3) and the apparent porosity of 55.0%.In addition,it is found that self-decomposition of talc and the formation of forsterite can form pores inside the sample.展开更多
The sol-gel method is used to prepare a new nano-alumina aerogel structure and the thermal properties of this nanomaterial are investigated comprehensively using electron microscope scanning,thermal analysis,X-ray and...The sol-gel method is used to prepare a new nano-alumina aerogel structure and the thermal properties of this nanomaterial are investigated comprehensively using electron microscope scanning,thermal analysis,X-ray and infrared spectrometer analysis methods.It is found that the composite aerogel alumina material has a multi-level porous nano-network structure.When employed for the thermal insulation of high-rise buildings,the alumina nanocomposite aerogel material can lead to effective energy savings in winter.However,it has almost no energy-saving effect on buildings where energy is consumed for cooling in summer.展开更多
Deep petroleum resources are stored under high temperature and pressure conditions,with the temperature having a significant influence on the properties of rocks.Deep in-situ temperature-preserved coring(ITP-coring)de...Deep petroleum resources are stored under high temperature and pressure conditions,with the temperature having a significant influence on the properties of rocks.Deep in-situ temperature-preserved coring(ITP-coring)devices were developed to assess deep petroleum reserves accurately.Herein,hollow glass microspheres(HGMs)/silicone rubber(SR)composites that exhibit excellent thermal insulation properties were prepared as thermal insulation materials for deep ITP-coring devices.The mechanism and process of heat transfer in the composites were explored,as well as their other properties.The results show that the HGMs exhibit good compatibility with the SR matrix.When the volume fraction of the HGMs is increased to 50%,the density of the HGMs/SR composites is reduced from 0.97 to 0.56 g/cm^(3).The HGMs filler introduces large voids into the composites,reducing their thermal conductivity to 0.11 W/m·K.The addition of HGMs into the composites further enhances the thermal stability of the SR,wherein the higher the HGMs filler content,the better the thermal stability of the composites.HGMs significantly enhance the mechanical strength of the SR.HGMs increase the compressive strength of the composites by 828%and the tensile strength by 164%.Overall,HGMs improve the thermal insulation,pressure resistance,and thermal stability of HGMs/SR composites.展开更多
This study is planned to investigate the problems associated with the wasted sheep fleece in Jordan and to suggest methods to decrease its environmental impact. Results indicate that sheep fleece in Jordan makes an ex...This study is planned to investigate the problems associated with the wasted sheep fleece in Jordan and to suggest methods to decrease its environmental impact. Results indicate that sheep fleece in Jordan makes an excellent resource for buildings insulation material. A linear regression model is used to predict sheep number for the period (2017-2030). Based on the predicted number of Sheep an estimated annual average production of wool is found for the period (2017-2030) to be (3.586 × 10<sup>3</sup> ton). The average cost per kg of fleece produced is calculated to be 0.39 JD, and the estimated price of fleece per head, if market is available for raw fleece, is 1 JD. Average annual financial losses by farmers are calculated to be (3.743 × 10<sup>6</sup> JD) for the period 2002-2016, and they were estimated to be (9.421 × 10<sup>6</sup> JD) for the years 2017-2030. Physical characteristics of sheep-wool are presented and compared to other competitive insulation materials (polystyrene and rockwool). Sustainability of sheep-wool production to be utilized as an insulation material is found to be an excellent solution to the huge waste of wool with respect to farmers and National income and to the problems associated with environmental impact. Results can be generalized to similar cases worldwide.展开更多
A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter ...A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter as nanoparticles with the formation of the SiO Ti bonds.The growth mechanism accounting for the formation of the TiO2 nanolayers was proposed.The morphology,composition,thermal insulation properties,and visible-near infrared(VIS-NIR)refl ectance of the HGMs/TiO2 composite hollow spheres were characterized.The VIS-NIR reflectance of the HGMs/TiO2 composite hollow spheres increased by more than 30%compared to raw HGMs.The thermal conductivity of the particles is 0.058 W/(m K).The result indicates that the VIS-NIR reflectance of the composite hollow spheres is strongly influenced by the coating of TiO2.The composite hollow spheres were used as the main functional filler to prepare the organic-inorganic composite coatings.The glass substrates coated by the organic-inorganic coatings had lower thermal conductivity and higher near infrared reflectivity.Therefore,the HGMs/TiO2 composite hollow spheres can reflect most of the solar energy and effectively keep out the heat as a thermal insulation coating for energy-saving constructions.展开更多
In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregat...In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregates(using high purity magnesia powder as starting material and potassium oleate as the foaming agent),middle grade magnesia powder,calcium aluminate cement,and SiO_(2) micropowder as starting materials,introducing walnut shell powder impregnated with silica sol(short for Sws)as a pore-forming agent.The effects of the Sws addition(0,10%,15%,and 20%,by mass)and the sintering temperature(1300,1350,1400,and 1480℃)on the properties of magnesia insulation materials were studied.The results show that(1)for the specimens fired at 1480℃,when the Sws addition is 10%,the cold compressive strength is 22 MPa;when the Sws addition is 20%,the thermal conductivity is 0.368 W·m^(-1)·K^(-1)(350℃);(2)nano-silica in the silica sol reacts with MgO in the matrix to form forsterite,which encapsulates the pores volatilized from the walnut shell powder and forms closed pores.展开更多
Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical indust...Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical industry on the aspects of energy conservation and emissions reduction.This paper presents characteristics and use of mineral wool made of blast furnace slag,and also introduces mineral wool production process and key techniques.It also put forward a number of issues need to be addressed in the process.The inherent mechanism affecting the performance of the of mineral wool is analyzed.And it points out the target and future direction of R & D in Baoshan Iron and Steel in mineral wool technology field.展开更多
We want to conclude on the interest of the “crimping” process used to produce the glass wool and to make a comparison for anisotropic factor obtained from structural property (air permeability) as well as thermal pr...We want to conclude on the interest of the “crimping” process used to produce the glass wool and to make a comparison for anisotropic factor obtained from structural property (air permeability) as well as thermal property (thermal conductivity and diffusivity). The main structural (densities, porosity, specific surface, air permeability) and the thermal (conductivity, diffusivity, heat capacity) characteristics of this glass wool are presented. Thermal results are determined by using several methods (Hot disc (HD), Heat Flow Meter (HFM) and Guarded Hot Plate).展开更多
At present,thermal conductivity is usually taken as a constant value in the calculation of building energy con-sumption and load.However,in the actual use of building materials,they are exposed to the environment with...At present,thermal conductivity is usually taken as a constant value in the calculation of building energy con-sumption and load.However,in the actual use of building materials,they are exposed to the environment with continuously changing temperature and relative humidity.The thermal conductivity of materials will inevitably change with temperature and humidity,leading to deviations in the estimation of energy consumption in the building.Therefore,in this study,variations in the thermal conductivity of eight common building insulation materials(glass wool,rock wool,silica aerogel blanket,expanded polystyrene,extruded polystyrene,phenolic foam,foam ceramic and foam glass)with temperature(in the range of 20-60°C)and relative humidity(in the range of 0-100%)were studied by experimental methods.The results show that the thermal conductivity of these common building insulation materials increased approximately linearly with increasing temperature with maxi-mum growth rates from 3.9 to 22.7%in the examined temperature range.Due to the structural characteristics of materials,the increasing thermal conductivity of different materials varies depending on the relative humidity.The maximum growth rates of thermal conductivity with humidity ranged from 8.2 to 186.7%.In addition,the principles of selection of building insulation materials in different humidity regions were given.The research re-sults of this paper aim to provide basic data for the accurate value of thermal conductivity of building insulation materials and for the calculation of energy consumption.展开更多
Insulating liquid plays an important role for the life span of the transformer.Petroleum-based mineral oil has become dominant insulating liquid of transformer for more than a century for its excellent dielectric and ...Insulating liquid plays an important role for the life span of the transformer.Petroleum-based mineral oil has become dominant insulating liquid of transformer for more than a century for its excellent dielectric and cooling properties.However,the usage of petroleum-based mineral oil,derived from a nonrenewable energy source,has affected the environment for its nonbiodegradability property.Therefore,researchers direct their attention to renewable and biodegradable alternatives.Palm fatty acid ester,coconut oil,sunflower oil,etc.are considered as alternatives to replace mineral oil as transformer insulation liquid.This paper gives an extensive review of different liquid insulating materials used in a transformer.Characterization of different liquids as an insulating material has been discussed.An attempt has been made to classify different insulating liquids-based on different properties.展开更多
Destructive quantum interference(DQI)provides a unique approach to controlling the leakage current in the OFF state of molecular devices.However,the DQI in π-conjugated molecular building blocks cannot exhibit ultral...Destructive quantum interference(DQI)provides a unique approach to controlling the leakage current in the OFF state of molecular devices.However,the DQI in π-conjugated molecular building blocks cannot exhibit ultralow conductance due to the existence of covalently bonded σ-transport channels.Thus,suppressing the σ-contribution via σ-DQI is essential for the fabrication of molecular junctions with high insulation and effective modulation of conductance in single-molecule junctions.Here,we demonstrate the existence of σ-DQI even in a simple series of C_(m)C_(n) ring molecules,with parallel chains of m and n alkyl units(where m,n=6,8 or 10),by measuring their electrical conductance and Seebeck coefficients.Counterintuitively,the conductance of the symmetric C_(n)C_(n) rings is lower than that of the corresponding single chains(C_(n)),which is in contrast to the conductance superposition law in multi-channeled systems.Combined theoretical calculations reveal that the gauche conformation in a shorter chain fixed by another chain leads to the decreased conductance in alkyl rings,which originates from the phase-coherent tunneling and DQI in σ-conjugated systems.Our finding suggests that through appropriate conformation locking by cyclization,the covalent alkane system can exhibit DQI,which offers strategies for future designs of molecular electronic devices and materials.展开更多
A composite biomass insulation material,which uses geopolymers as adhesives and forestry waste as fillers,was proposed and experimentally tested.The orthogonal experimental method was adopted to analyze the optimum th...A composite biomass insulation material,which uses geopolymers as adhesives and forestry waste as fillers,was proposed and experimentally tested.The orthogonal experimental method was adopted to analyze the optimum theoretical oxide molar ratios and the mass ratio of mixing water to binder(m_(w2)/m__(B))for preparing geopolymers.The influences of curing regimes(including one-stage and two-stage curing methods)and m_(w2)/m_(B) ratios of the insulation materials on mechanical,thermal,and hydraulic performances were also studied by experiment.The results indicated that the optimum combination scheme of preparing geopolymers was molar ratio x_(SiO_(2))/x_(Na_(2)O)=3.3,x_(SiO_(2))/x_(Al_(2)O_(3))=3.2 and m_(w2)/m_(B)=0.5 with the highest mechanical strength of 34.21 MPa.Besides,the best curing conditions of the composite material were the curing temperatures of 85°C and 70°C under the two-stage curing regime,which could achieve the low heat conductivity of 0.123 and 0.125 W/(m·K),and the high mechanical strength of 1.70 MPa and 1.71 MPa,respectively.The optimum m_(w2)/m_(B)ratios of the biomass material were 0.5 to 0.55 with heat conductivity of 0.114 to 0.125 W/(m·K).This novel composite insulation material has satisfying physical performances,which is helpful for achieving building energy conservation.展开更多
Thermal insulation materials play an increasingly important role in protecting mechanical parts functioning at high temperatures.In this study,a new porous high-entropy(La_(1/6)Ce_(1/6)Pr_(1/6)Sm_(1/6)Eu_(1/6)Gd_(1/6)...Thermal insulation materials play an increasingly important role in protecting mechanical parts functioning at high temperatures.In this study,a new porous high-entropy(La_(1/6)Ce_(1/6)Pr_(1/6)Sm_(1/6)Eu_(1/6)Gd_(1/6))PO_(4)(HE(6RE_(1/6))PO_(4))ceramics was prepared by combining the high-entropy method with the pore-forming agent method and the effect of different starch contents(0–60vol%)on this ceramic properties was systematically investigated.The results show that the porous HE(6RE_(1/6))PO_(4)ceramics with 60vol%starch exhibit the lowest thermal conductivity of 0.061 W·m^(-1)·K^(-1)at room temperature and good pore structure stability with a linear shrinkage of approximately1.67%.Moreover,the effect of large regular spherical pores(>10μm)on its thermal insulation performance was discussed,and an optimal thermal conductivity prediction model was screened.The superior properties of the prepared porous HE(6RE_(1/6))PO_(4)ceramics allow them to be promising insulation materials in the future.展开更多
The building sector accounts for nearly 40%of global energy consumption.In Nigeria,more than two-thirds of the consumption comes from residential buildings.Energy efficiency measures through the adoption of insulation...The building sector accounts for nearly 40%of global energy consumption.In Nigeria,more than two-thirds of the consumption comes from residential buildings.Energy efficiency measures through the adoption of insulation materials are tools that could crash the peak demand of energy in buildings while improving its thermal comfort and aerogel is considered as the most effective material for insulation,owing to its unique thermal properties.In this paper,we present the performance of aerogel as a thermal insulation material towards a sustainable design of residential buildings for tropical climates in Nigeria.First,a typical residential building in the tropical region was modeled with conventional materials utilized in the region and was later modified through the application of aerogel material on various surfaces of the model.A whole building energy simulation was then carried out in each variation and the outcome was compared to effectively conclude on the significance of aerogel in terms of thermal comfort improvement and energy consumption reduction.Results show that aerogel had the highest influence when inserted in the attic and floor slabs of the designed model.A reduction of more than 6%was attained in the recorded indoor mean air and operative temperatures while still maintaining an acceptable humidity range.Concerning energy consumption,a reduction of more than 15%was achieved.However,the high price of aerogel may hinder its application on the studied building but could be a good investment where climate change and sustainability are of high importance and less concern is given to expenditure.Aerogel demonstrated significant potential with respect to both thermal comfort improvement and energy consumption reduction on the designed model.The outcome of the study is hoped to serve as a base reference for the insulation of residential buildings with similar climate and characteristics to the adopted case building.展开更多
Affected by climate warming and shady–sunny slope effect,the permafrost foundation under the railway is undergoing a significant asymmetric degradation process;research on the corresponding regulating or strengthenin...Affected by climate warming and shady–sunny slope effect,the permafrost foundation under the railway is undergoing a significant asymmetric degradation process;research on the corresponding regulating or strengthening measures is urgently needed.Based on a well developed of numerical model,we analyzed the‘thermal repair’effect of three redesigned differential thermal reinforcement on the partially degraded permafrost embankment with steps.The results show that,when used as a strengthening measure,the method of laying crushed rock revetment(CRR)with different thicknesses on the sunny and shady slopes cannot completely eliminate the residual warm permafrost regions formed in the previous thermal erosion.When the TCRR scheme is adopted for reinforcement,although horizontal region from the evaporation section of thermosyphones(TPCTs)to the right side of the embankment is remarkably cooled,permafrost under the sunny slope is still deteriorating.In the long run,both ETCRR and TCECRR reinforcement schemes can produce a large range of‘cold core’right below the whole embankment.However,from the perspective of the simultaneous functioning range and cold storage capacity,the TCECRR scheme is signally more efficient.The thermal insulation materials in the above composite strengthening measures can not only resist the heat input in the warm season,but also improve their working efficiency by maintaining the temperature difference between the evaporation section of the heat pipe and the external environment in cold season.The addition of crushed rock revetment in TCECRR has played its thermal semiconductor effect and further improved the comprehensive thermal repair efficiency of the composite measures.展开更多
Determining the optimum insulation thicknesses of external envelopes for livestock buildings are one of the most effective metrics to decrease energy requirements.This study was carried out to determine the optimum in...Determining the optimum insulation thicknesses of external envelopes for livestock buildings are one of the most effective metrics to decrease energy requirements.This study was carried out to determine the optimum insulation thicknesses for livestock buildings in different climate zones,to examine the effects of insulation thickness and material(foam glass,mineral wool,expanded polystyrene,foamed polyurethane,foamed polyvinyl chloride,and expanded polyethylene)on life cycle total cost,life cycle savings,and payback period.The finishing pig houses and laying hen buildings with sandwich wall structures(color steel laminboard)in five typical cities were studied using the degree-days method with economic models.Optimal insulation thicknesses ranged from 0.05 m to 0.25 m and 0.02 m to 0.24 m in finishing pig houses and poultry buildings,respectively;the life cycle total costs ranged from 16.49 to 37.98$/m2 and 13.37 to 36.84$/m2;the life cycle savings ranged from 29.13 to 220.60$/m2 and 0 to 202.13$/m2;and the payback period ranged from 1.11 to 5.81 years and 1.19 to 20.76 years,respectively.Foamed polyurethane provided the highest life cycle savings,while foam glass had the lowest.In this research,the insulation thicknesses for the sandwich structure livestock buildings external envelopes are optimized,and the energy saving can be obtained by using proper insulation thickness in different regions.Furthermore,it can increase the knowledge about energy consumption in the livestock buildings and the results can be also a useful tool for farmers.展开更多
文摘The present study focuses on the formulation of new composite consisting of plaster and raffia vinifera particle (RVP) with the purpose to reducing energy consumption. The aim of this study is to test this new compound as an insulating eco-material in building in a tropical climate. The composites samples were developed by mixing plaster with raffia vinifera particles (RVP) using three different sizes (1.6 mm, 2.5 mm and 4 mm). The effects of four different RVP incorporations rates (i.e., 0wt%, 5wt%;10wt%;15wt%) on physical, thermal, mechanicals properties of the composites were investigated. In addition, the use of the raffia vinifera particles and plaster based composite material as building envelopes thermal insulation material is studied by the habitable cell thermal behavior instrumentation. The results indicate that the incorporation of raffia vinifera particle leads to improve the new composite physical, mechanical and thermal properties. And the parametric analysis reveals that the sampling rate and the size of raffia vinifera particles are the most decisive factor to impact these properties, and to decreases in the thermal conductivity which leads to an improvement to the thermal resistance and energy savings. The best improvement of plaster composite was obtained at the raffia vinifera particles size between 2.5 and 4.0 mm loading of 5wt% (C95P5R) with a good ratio of thermo-physical-mechanical properties. Additionally, the habitable cell experimental thermal behavior, with the new raffia vinifera particles and plaster-based composite as thermal insulating material for building walls, gives an average damping of 4°C and 5.8°C in the insulated house interior environment respectively for cold and hot cases compared to the outside environment and the uninsulated house interior environment. The current study highlights that this mixture gives the new composite thermal insulation properties applicable in the eco-construction of habitats in tropical environments.
基金funded by the National Natural Science Foundation of China (52078068)Postgraduate Research&Practice Innovation Program of Jiangsu Province (SJCX22_1391)+1 种基金the National Science Foundation of Jiangsu Province (BK20220626)Changzhou Leading Innovative Talent Introduction and Cultivation Project (CQ20210085).
文摘As socioeconomic development continues,the issue of building energy consumption has attracted significant attention,and improving the thermal insulation performance of buildings has become a crucial strategic measure.Simultaneously,the application of solid waste in insulation materials has also become a hot topic.This paper reviews the sources and classifications of solid waste,focusing on research progress in its application as insulation materials in the domains of daily life,agriculture,and industry.The research shows that incorporating household solid waste materials,such as waste glass,paper,and clothing scraps into cementitious thermal insulation can significantly reduce the thermal conductivity of the materials,leading to excellent thermal insulation properties.Insulation materials prepared from agricultural solid waste,such as barley straw,corn stalk,chicken feather,and date palm fibers,possess characteristics of lightweight and strong thermal insulation.Industrial solid waste,including waste tires,iron tailings,and coal bottom ash,can also be utilized in the preparation of insulation materials.These innovative applications not only have positive environmental significance by reducing waste emissions and resource consumption,but also provide efficient and sustainable insulation solutions for the construction industry.However,to further optimize the mix design and enhance the durability of insulation materials,continuous research is required to investigate the mechanisms through which solid waste impacts the performance of insulation materials.
文摘Low grade magnesite is one of the main research directions in the future as the raw material for the preparation of magnesia based insulating refractories.Periclase-forsterite(MgO-Mg_(2)SiO_(4)) lightweight insulating refractories were prepared by the molten salt method with high silica magnesite and tertiary talc ore as raw materials by pretreating them to get light burnt magnesia and talc,and NaCl molten salt as the reaction medium.The effects of the NaCl addition,the sintering temperature,the holding time and the raw material ratio on the sample preparation were studied.The results show that when the NaCl addition is 20% of the mass of light burnt magnesia and talc mixture,the sintering temperature is 1 200 ℃,the holding time is 6 h,and m(light burnt magnesia):m(talc)=5:5,the sample has the optimal comprehensive properties:the bulk density of 1.46 g·cm^(-3) and the apparent porosity of 55.0%.In addition,it is found that self-decomposition of talc and the formation of forsterite can form pores inside the sample.
文摘The sol-gel method is used to prepare a new nano-alumina aerogel structure and the thermal properties of this nanomaterial are investigated comprehensively using electron microscope scanning,thermal analysis,X-ray and infrared spectrometer analysis methods.It is found that the composite aerogel alumina material has a multi-level porous nano-network structure.When employed for the thermal insulation of high-rise buildings,the alumina nanocomposite aerogel material can lead to effective energy savings in winter.However,it has almost no energy-saving effect on buildings where energy is consumed for cooling in summer.
基金supported by the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08G315)Shenzhen Basic Research Program(General Program)(No.JCYJ20190808153416970)National Natural Science Foundation of China No.51827901 and U2013603。
文摘Deep petroleum resources are stored under high temperature and pressure conditions,with the temperature having a significant influence on the properties of rocks.Deep in-situ temperature-preserved coring(ITP-coring)devices were developed to assess deep petroleum reserves accurately.Herein,hollow glass microspheres(HGMs)/silicone rubber(SR)composites that exhibit excellent thermal insulation properties were prepared as thermal insulation materials for deep ITP-coring devices.The mechanism and process of heat transfer in the composites were explored,as well as their other properties.The results show that the HGMs exhibit good compatibility with the SR matrix.When the volume fraction of the HGMs is increased to 50%,the density of the HGMs/SR composites is reduced from 0.97 to 0.56 g/cm^(3).The HGMs filler introduces large voids into the composites,reducing their thermal conductivity to 0.11 W/m·K.The addition of HGMs into the composites further enhances the thermal stability of the SR,wherein the higher the HGMs filler content,the better the thermal stability of the composites.HGMs significantly enhance the mechanical strength of the SR.HGMs increase the compressive strength of the composites by 828%and the tensile strength by 164%.Overall,HGMs improve the thermal insulation,pressure resistance,and thermal stability of HGMs/SR composites.
文摘This study is planned to investigate the problems associated with the wasted sheep fleece in Jordan and to suggest methods to decrease its environmental impact. Results indicate that sheep fleece in Jordan makes an excellent resource for buildings insulation material. A linear regression model is used to predict sheep number for the period (2017-2030). Based on the predicted number of Sheep an estimated annual average production of wool is found for the period (2017-2030) to be (3.586 × 10<sup>3</sup> ton). The average cost per kg of fleece produced is calculated to be 0.39 JD, and the estimated price of fleece per head, if market is available for raw fleece, is 1 JD. Average annual financial losses by farmers are calculated to be (3.743 × 10<sup>6</sup> JD) for the period 2002-2016, and they were estimated to be (9.421 × 10<sup>6</sup> JD) for the years 2017-2030. Physical characteristics of sheep-wool are presented and compared to other competitive insulation materials (polystyrene and rockwool). Sustainability of sheep-wool production to be utilized as an insulation material is found to be an excellent solution to the huge waste of wool with respect to farmers and National income and to the problems associated with environmental impact. Results can be generalized to similar cases worldwide.
文摘A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter as nanoparticles with the formation of the SiO Ti bonds.The growth mechanism accounting for the formation of the TiO2 nanolayers was proposed.The morphology,composition,thermal insulation properties,and visible-near infrared(VIS-NIR)refl ectance of the HGMs/TiO2 composite hollow spheres were characterized.The VIS-NIR reflectance of the HGMs/TiO2 composite hollow spheres increased by more than 30%compared to raw HGMs.The thermal conductivity of the particles is 0.058 W/(m K).The result indicates that the VIS-NIR reflectance of the composite hollow spheres is strongly influenced by the coating of TiO2.The composite hollow spheres were used as the main functional filler to prepare the organic-inorganic composite coatings.The glass substrates coated by the organic-inorganic coatings had lower thermal conductivity and higher near infrared reflectivity.Therefore,the HGMs/TiO2 composite hollow spheres can reflect most of the solar energy and effectively keep out the heat as a thermal insulation coating for energy-saving constructions.
文摘In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregates(using high purity magnesia powder as starting material and potassium oleate as the foaming agent),middle grade magnesia powder,calcium aluminate cement,and SiO_(2) micropowder as starting materials,introducing walnut shell powder impregnated with silica sol(short for Sws)as a pore-forming agent.The effects of the Sws addition(0,10%,15%,and 20%,by mass)and the sintering temperature(1300,1350,1400,and 1480℃)on the properties of magnesia insulation materials were studied.The results show that(1)for the specimens fired at 1480℃,when the Sws addition is 10%,the cold compressive strength is 22 MPa;when the Sws addition is 20%,the thermal conductivity is 0.368 W·m^(-1)·K^(-1)(350℃);(2)nano-silica in the silica sol reacts with MgO in the matrix to form forsterite,which encapsulates the pores volatilized from the walnut shell powder and forms closed pores.
文摘Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical industry on the aspects of energy conservation and emissions reduction.This paper presents characteristics and use of mineral wool made of blast furnace slag,and also introduces mineral wool production process and key techniques.It also put forward a number of issues need to be addressed in the process.The inherent mechanism affecting the performance of the of mineral wool is analyzed.And it points out the target and future direction of R & D in Baoshan Iron and Steel in mineral wool technology field.
文摘We want to conclude on the interest of the “crimping” process used to produce the glass wool and to make a comparison for anisotropic factor obtained from structural property (air permeability) as well as thermal property (thermal conductivity and diffusivity). The main structural (densities, porosity, specific surface, air permeability) and the thermal (conductivity, diffusivity, heat capacity) characteristics of this glass wool are presented. Thermal results are determined by using several methods (Hot disc (HD), Heat Flow Meter (HFM) and Guarded Hot Plate).
基金This work was supported by the National Natural Science Foundation of China(No.51878534,No.51878532 and U20A20311)State Key Laboratory of Green Building in Western China.
文摘At present,thermal conductivity is usually taken as a constant value in the calculation of building energy con-sumption and load.However,in the actual use of building materials,they are exposed to the environment with continuously changing temperature and relative humidity.The thermal conductivity of materials will inevitably change with temperature and humidity,leading to deviations in the estimation of energy consumption in the building.Therefore,in this study,variations in the thermal conductivity of eight common building insulation materials(glass wool,rock wool,silica aerogel blanket,expanded polystyrene,extruded polystyrene,phenolic foam,foam ceramic and foam glass)with temperature(in the range of 20-60°C)and relative humidity(in the range of 0-100%)were studied by experimental methods.The results show that the thermal conductivity of these common building insulation materials increased approximately linearly with increasing temperature with maxi-mum growth rates from 3.9 to 22.7%in the examined temperature range.Due to the structural characteristics of materials,the increasing thermal conductivity of different materials varies depending on the relative humidity.The maximum growth rates of thermal conductivity with humidity ranged from 8.2 to 186.7%.In addition,the principles of selection of building insulation materials in different humidity regions were given.The research re-sults of this paper aim to provide basic data for the accurate value of thermal conductivity of building insulation materials and for the calculation of energy consumption.
文摘Insulating liquid plays an important role for the life span of the transformer.Petroleum-based mineral oil has become dominant insulating liquid of transformer for more than a century for its excellent dielectric and cooling properties.However,the usage of petroleum-based mineral oil,derived from a nonrenewable energy source,has affected the environment for its nonbiodegradability property.Therefore,researchers direct their attention to renewable and biodegradable alternatives.Palm fatty acid ester,coconut oil,sunflower oil,etc.are considered as alternatives to replace mineral oil as transformer insulation liquid.This paper gives an extensive review of different liquid insulating materials used in a transformer.Characterization of different liquids as an insulating material has been discussed.An attempt has been made to classify different insulating liquids-based on different properties.
基金the financial supports by the National Natural Science Foundation of China(22173075,21933012,31871877,21703188 and 92061117)the National Key Research and Development Program of China(2017YFA0204902)+9 种基金the Fundamental Research Funds for the Central Universities(20720200068 and 20720190002)Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(2021ZR129)financial support from the UK EPSRC(EP/M014452/1,EP/P027156/1 and EP/N03337X/1)additionally supported by the European Commission is provided by the FET Open project 767187–QuIETfinancial assistance from the Leverhulme Foundation(ECF-2020-638)Tikrit University(Iraq)the Iraqi Ministry of Higher Education(SL–20)financial assistance from Anbar Universityfinancial assistance from King Faisal and Al-Jouf Universities(Saudi Arabia)the Saudi Ministry of Education。
文摘Destructive quantum interference(DQI)provides a unique approach to controlling the leakage current in the OFF state of molecular devices.However,the DQI in π-conjugated molecular building blocks cannot exhibit ultralow conductance due to the existence of covalently bonded σ-transport channels.Thus,suppressing the σ-contribution via σ-DQI is essential for the fabrication of molecular junctions with high insulation and effective modulation of conductance in single-molecule junctions.Here,we demonstrate the existence of σ-DQI even in a simple series of C_(m)C_(n) ring molecules,with parallel chains of m and n alkyl units(where m,n=6,8 or 10),by measuring their electrical conductance and Seebeck coefficients.Counterintuitively,the conductance of the symmetric C_(n)C_(n) rings is lower than that of the corresponding single chains(C_(n)),which is in contrast to the conductance superposition law in multi-channeled systems.Combined theoretical calculations reveal that the gauche conformation in a shorter chain fixed by another chain leads to the decreased conductance in alkyl rings,which originates from the phase-coherent tunneling and DQI in σ-conjugated systems.Our finding suggests that through appropriate conformation locking by cyclization,the covalent alkane system can exhibit DQI,which offers strategies for future designs of molecular electronic devices and materials.
基金funded by the Science and Technology Bureau of Changsha,China(No.kh1902239)National Natural Science Foundations of China(No.52076070No.52008166)。
文摘A composite biomass insulation material,which uses geopolymers as adhesives and forestry waste as fillers,was proposed and experimentally tested.The orthogonal experimental method was adopted to analyze the optimum theoretical oxide molar ratios and the mass ratio of mixing water to binder(m_(w2)/m__(B))for preparing geopolymers.The influences of curing regimes(including one-stage and two-stage curing methods)and m_(w2)/m_(B) ratios of the insulation materials on mechanical,thermal,and hydraulic performances were also studied by experiment.The results indicated that the optimum combination scheme of preparing geopolymers was molar ratio x_(SiO_(2))/x_(Na_(2)O)=3.3,x_(SiO_(2))/x_(Al_(2)O_(3))=3.2 and m_(w2)/m_(B)=0.5 with the highest mechanical strength of 34.21 MPa.Besides,the best curing conditions of the composite material were the curing temperatures of 85°C and 70°C under the two-stage curing regime,which could achieve the low heat conductivity of 0.123 and 0.125 W/(m·K),and the high mechanical strength of 1.70 MPa and 1.71 MPa,respectively.The optimum m_(w2)/m_(B)ratios of the biomass material were 0.5 to 0.55 with heat conductivity of 0.114 to 0.125 W/(m·K).This novel composite insulation material has satisfying physical performances,which is helpful for achieving building energy conservation.
基金the National Key R&D Program of China(No.2021YFB3701404)the National Natural Science Fund for Distinguished Young Scholars(No.52025041)+1 种基金the National Natural Science Foundation of China(Nos.52250091,51904021,and 52174294)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-20-02C2 and FRF-BD-22-05).
文摘Thermal insulation materials play an increasingly important role in protecting mechanical parts functioning at high temperatures.In this study,a new porous high-entropy(La_(1/6)Ce_(1/6)Pr_(1/6)Sm_(1/6)Eu_(1/6)Gd_(1/6))PO_(4)(HE(6RE_(1/6))PO_(4))ceramics was prepared by combining the high-entropy method with the pore-forming agent method and the effect of different starch contents(0–60vol%)on this ceramic properties was systematically investigated.The results show that the porous HE(6RE_(1/6))PO_(4)ceramics with 60vol%starch exhibit the lowest thermal conductivity of 0.061 W·m^(-1)·K^(-1)at room temperature and good pore structure stability with a linear shrinkage of approximately1.67%.Moreover,the effect of large regular spherical pores(>10μm)on its thermal insulation performance was discussed,and an optimal thermal conductivity prediction model was screened.The superior properties of the prepared porous HE(6RE_(1/6))PO_(4)ceramics allow them to be promising insulation materials in the future.
基金The work presented in this paper was fully supported by the Nige-rian Petroleum Technology Development Fund,through the Fundação para o Desenvolvimento Tecnológico da Engenharia,Brasil(grant No.4179/16).However,the sponsors had no involvement in the prepara-tion and or submission of the article.
文摘The building sector accounts for nearly 40%of global energy consumption.In Nigeria,more than two-thirds of the consumption comes from residential buildings.Energy efficiency measures through the adoption of insulation materials are tools that could crash the peak demand of energy in buildings while improving its thermal comfort and aerogel is considered as the most effective material for insulation,owing to its unique thermal properties.In this paper,we present the performance of aerogel as a thermal insulation material towards a sustainable design of residential buildings for tropical climates in Nigeria.First,a typical residential building in the tropical region was modeled with conventional materials utilized in the region and was later modified through the application of aerogel material on various surfaces of the model.A whole building energy simulation was then carried out in each variation and the outcome was compared to effectively conclude on the significance of aerogel in terms of thermal comfort improvement and energy consumption reduction.Results show that aerogel had the highest influence when inserted in the attic and floor slabs of the designed model.A reduction of more than 6%was attained in the recorded indoor mean air and operative temperatures while still maintaining an acceptable humidity range.Concerning energy consumption,a reduction of more than 15%was achieved.However,the high price of aerogel may hinder its application on the studied building but could be a good investment where climate change and sustainability are of high importance and less concern is given to expenditure.Aerogel demonstrated significant potential with respect to both thermal comfort improvement and energy consumption reduction on the designed model.The outcome of the study is hoped to serve as a base reference for the insulation of residential buildings with similar climate and characteristics to the adopted case building.
基金This research was funded by National Natural Science Foundation of China(41861010,41801033)The CAS Light of the West China Training Program(Granted to Dr.Yan-Dong Hou)+1 种基金the Funds for Creative Research Groups of Gansu Province,China(20JR5RA478)Science and Technology Program of Gansu Province(22YF11GA302).
文摘Affected by climate warming and shady–sunny slope effect,the permafrost foundation under the railway is undergoing a significant asymmetric degradation process;research on the corresponding regulating or strengthening measures is urgently needed.Based on a well developed of numerical model,we analyzed the‘thermal repair’effect of three redesigned differential thermal reinforcement on the partially degraded permafrost embankment with steps.The results show that,when used as a strengthening measure,the method of laying crushed rock revetment(CRR)with different thicknesses on the sunny and shady slopes cannot completely eliminate the residual warm permafrost regions formed in the previous thermal erosion.When the TCRR scheme is adopted for reinforcement,although horizontal region from the evaporation section of thermosyphones(TPCTs)to the right side of the embankment is remarkably cooled,permafrost under the sunny slope is still deteriorating.In the long run,both ETCRR and TCECRR reinforcement schemes can produce a large range of‘cold core’right below the whole embankment.However,from the perspective of the simultaneous functioning range and cold storage capacity,the TCECRR scheme is signally more efficient.The thermal insulation materials in the above composite strengthening measures can not only resist the heat input in the warm season,but also improve their working efficiency by maintaining the temperature difference between the evaporation section of the heat pipe and the external environment in cold season.The addition of crushed rock revetment in TCECRR has played its thermal semiconductor effect and further improved the comprehensive thermal repair efficiency of the composite measures.
基金This work was supported by National Key R&D Program of China(2018YFD0500700)and the China Agricultural Research System(CARS-40).
文摘Determining the optimum insulation thicknesses of external envelopes for livestock buildings are one of the most effective metrics to decrease energy requirements.This study was carried out to determine the optimum insulation thicknesses for livestock buildings in different climate zones,to examine the effects of insulation thickness and material(foam glass,mineral wool,expanded polystyrene,foamed polyurethane,foamed polyvinyl chloride,and expanded polyethylene)on life cycle total cost,life cycle savings,and payback period.The finishing pig houses and laying hen buildings with sandwich wall structures(color steel laminboard)in five typical cities were studied using the degree-days method with economic models.Optimal insulation thicknesses ranged from 0.05 m to 0.25 m and 0.02 m to 0.24 m in finishing pig houses and poultry buildings,respectively;the life cycle total costs ranged from 16.49 to 37.98$/m2 and 13.37 to 36.84$/m2;the life cycle savings ranged from 29.13 to 220.60$/m2 and 0 to 202.13$/m2;and the payback period ranged from 1.11 to 5.81 years and 1.19 to 20.76 years,respectively.Foamed polyurethane provided the highest life cycle savings,while foam glass had the lowest.In this research,the insulation thicknesses for the sandwich structure livestock buildings external envelopes are optimized,and the energy saving can be obtained by using proper insulation thickness in different regions.Furthermore,it can increase the knowledge about energy consumption in the livestock buildings and the results can be also a useful tool for farmers.
