A comprehensive understanding of the dynamic frictional characteristics in rock joints under high normal load and strong confinement is essential for ensuring the safety of deep engineering construction and mitigating...A comprehensive understanding of the dynamic frictional characteristics in rock joints under high normal load and strong confinement is essential for ensuring the safety of deep engineering construction and mitigating geological disasters.This study conducted shear experiments on rough rock joints under displacement-controlled dynamic normal loads,investigating the shear behaviors of joints across varying initial normal loads,normal loading frequencies,and normal loading amplitudes.Experimental results showed that the peak/valley shear force values increased with initial normal loads and normal loading frequencies but showed an initial increase followed by a decrease with normal loading amplitudes.Dynamic normal loading can either increase or decrease shear strength,while this study demonstrates that higher frequencies lead to enhanced friction.Increased initial normal loading and normal loading frequency result in a gradual decrease in joint roughness coefficient(JRC)values of joint surfaces after shearing.Positive correlations existed between frictional energy dissipation and peak shear forces,while post-shear joint surface roughness exhibited a negative correlation with peak shear forces through linear regression analysis.This study contributes to a better understanding of the sliding responses and shear mechanical characteristics of rock joints under dynamic disturbances.展开更多
To reduce data variance caused by individual differences of different samples,a new experimental method is proposed by loading and unloading the axial forces with different frequencies and different waves of a certain...To reduce data variance caused by individual differences of different samples,a new experimental method is proposed by loading and unloading the axial forces with different frequencies and different waves of a certain load amplitude to the same rock sample without damaging it.Lag time segments are defined and fractionized into segments I and Ⅱ.Criterions for seg-mentation,definitions of relevant parameters and empirical analysis are also offered afterwards.In the course of sinusoidal loading,the serious peak value dislocation of the displacement variation rate and the loading rate is defined as peak dislocation.Meanwhile,the definition of the apparent tangent modulus is put forward and the linear relation between it and the vertical force in the frequency of 0.1,0.2,0.5 Hz sinusoidal loading segment is confirmed to be ever-present on the basis of the test data.Then the calculating formula of the deformation rate in non-lag time is deduced.It is thus suggested that the deformation rate should be codetermined by the loading rate df/dt and instant load f(t),which well explains the peak dislocation of the time-variable curve peak value of dl/dt and deformation rate of df/dt.Finally the lag time derivation model is established and by comparing the calculated values with the measured ones,it is demonstrated that the above formula offers a better simulation of the sandstone deformation rate in the sinusoidal loading segment,with the load amplitude being 96 kN and the frequency ranging from 0.1 Hz to 0.5 Hz.展开更多
基金Projects(52174092,51904290)supported by the National Natural Science Foundation,ChinaProject(BK20220157)supported by the Natural Science Foundation of Jiangsu Province,China+1 种基金Project(232102321009)supported by Henan Province Science and Technology Key Project,ChinaProject(2022YCPY0202)supported by Fundamental Research Funds for the Central Universities,China。
文摘A comprehensive understanding of the dynamic frictional characteristics in rock joints under high normal load and strong confinement is essential for ensuring the safety of deep engineering construction and mitigating geological disasters.This study conducted shear experiments on rough rock joints under displacement-controlled dynamic normal loads,investigating the shear behaviors of joints across varying initial normal loads,normal loading frequencies,and normal loading amplitudes.Experimental results showed that the peak/valley shear force values increased with initial normal loads and normal loading frequencies but showed an initial increase followed by a decrease with normal loading amplitudes.Dynamic normal loading can either increase or decrease shear strength,while this study demonstrates that higher frequencies lead to enhanced friction.Increased initial normal loading and normal loading frequency result in a gradual decrease in joint roughness coefficient(JRC)values of joint surfaces after shearing.Positive correlations existed between frictional energy dissipation and peak shear forces,while post-shear joint surface roughness exhibited a negative correlation with peak shear forces through linear regression analysis.This study contributes to a better understanding of the sliding responses and shear mechanical characteristics of rock joints under dynamic disturbances.
基金supported by the National Natural Science Foundation of China (Grant No.90610029)the Foundation of China Three Gorges University (Grant Nos.KJ2009B061,KJ2009A033,2008ZRJ05,00956)
文摘To reduce data variance caused by individual differences of different samples,a new experimental method is proposed by loading and unloading the axial forces with different frequencies and different waves of a certain load amplitude to the same rock sample without damaging it.Lag time segments are defined and fractionized into segments I and Ⅱ.Criterions for seg-mentation,definitions of relevant parameters and empirical analysis are also offered afterwards.In the course of sinusoidal loading,the serious peak value dislocation of the displacement variation rate and the loading rate is defined as peak dislocation.Meanwhile,the definition of the apparent tangent modulus is put forward and the linear relation between it and the vertical force in the frequency of 0.1,0.2,0.5 Hz sinusoidal loading segment is confirmed to be ever-present on the basis of the test data.Then the calculating formula of the deformation rate in non-lag time is deduced.It is thus suggested that the deformation rate should be codetermined by the loading rate df/dt and instant load f(t),which well explains the peak dislocation of the time-variable curve peak value of dl/dt and deformation rate of df/dt.Finally the lag time derivation model is established and by comparing the calculated values with the measured ones,it is demonstrated that the above formula offers a better simulation of the sandstone deformation rate in the sinusoidal loading segment,with the load amplitude being 96 kN and the frequency ranging from 0.1 Hz to 0.5 Hz.
