Coal gasification slag(CGS)is a type of solid waste produced during coal gasification,in which heavy metals severely restrict its resource utilization.In this work,the mineral occurrence and distribution of typical he...Coal gasification slag(CGS)is a type of solid waste produced during coal gasification,in which heavy metals severely restrict its resource utilization.In this work,the mineral occurrence and distribution of typical heavy metal Cr in CGS is investigated.The leaching behavior of Cr under different conditions is studied in detail.Acid leaching-selective oxidation-coprecipitation method is proposed based on the characteristics of Cr in CGS.The detoxification of Cr in CGS is realized,and the detoxification mechanism is clarified.Results show that Cr is highly enriched in CGS.The speciation of Cr is mainly residual fraction(74.47%-86.12%),which is combined with amorphous aluminosilicate.Cr^(3+)and Cr^(6+)account for 90.93%-94.82%and 5.18%-9.07%of total Cr,respectively.High acid concentration and high liquid-solid ratio are beneficial to destroy the lattice structure of amorphous aluminosilicate,thus improving the leaching efficiency of Cr,which can reach 97.93%under the optimal conditions.Acid leaching-selective oxidation-coprecipitation method can realize the detoxification of Cr in CGS.Under the optimal conditions,the removal rates of Fe^(3+)and Cr^(3+)in the leaching solution are 80.99%-84.79%and 70.58%-71.69%,respectively,while the loss rate of Al^(3+)is only 1.10%-3.35%.Detoxification slag exists in the form of Fe-Cr coprecipitation(Fe_(1-x)Cr_xOOH),which can be used for smelting.The detoxification acid leaching solution can be used to prepare inorganic polymer composite coagulant poly-aluminum chloride(PAC).This study can provide theoretical and data guidance for detoxification of heavy metal Cr in CGS and achieve resource utilization of coal gasification solid waste.展开更多
A hydrometallurgical process was developed for recycling pharmaceutical blisters.Leaching aluminum from pharmaceutical blisters using sodium hydroxide(NaOH) solutions was investigated with respect to leaching behavior...A hydrometallurgical process was developed for recycling pharmaceutical blisters.Leaching aluminum from pharmaceutical blisters using sodium hydroxide(NaOH) solutions was investigated with respect to leaching behaviors and kinetics.AL9(34) orthogonal design of experiments suggests that the most significant factor is NaOH concentration followed by temperature and leaching time.Factorial experiments demonstrate that the leaching rate of aluminum increases with increasing of the factors.The optimum conditions are temperature of 70 °C,leaching time of 20 min,NaOH concentration of 1.25 mol/L,liquid-to-solid mass ratio of 15:1 and agitation speed of 400 r/min.Under optimum conditions,the leaching rate is up to 100%,implying that aluminum and polyvinyl chloride(PVC) plastic in pharmaceutical blisters are separated completely.Kinetics of leaching aluminum is best described by the product layer diffusion control model,and the activation energy is calculated to be 19.26 kJ/mol.展开更多
This paper investigates the leaching behavior of heavy metals(V,Pb,Cd,Cr,and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments.The results show that the dissolved concentra...This paper investigates the leaching behavior of heavy metals(V,Pb,Cd,Cr,and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments.The results show that the dissolved concentrations of V and As initially increased and then slightly decreased as time progressed and that the dissolved concentrations of Pb,Cd,and Cr were high in the early stage before decreasing.The particle size of the stone coal waste rocks strongly influenced the heavy metal concentration in the leaching solutions.The effects of the particle size of the stone coal waste rocks on the dissolved concentrations of V,Pb,and As decreased in the order fine fraction > medium fraction > coarse fraction,and the effects of particle size on the dissolved concentrations of Cr and Cd decreased in the order medium fraction > coarse fraction > fine fraction and coarse fraction > medium fraction > fine fraction,respectively.The quantities of heavy metals dissolved from the stone coal waste rock with fine particle sizes were observed to decrease in the order V(17104.36 μg/kg) > As(609.41 μg/kg) > Pb(469.24 μg/kg) > Cr(56.35 μg/kg) > Cd(27.52 μg/kg),and the dissolution rates decreased in the order As(2.96%) > Pb(0.93%) > V(0.35%) > Cd(0.25%) > Cr(0.01%).The specific surface area,pore size of the stone coal waste rocks,and chemical forms of heavy metals also influenced the release of heavy metals from the stone coal waste rocks.Kinetic analysis showed that the dissolution of heavy metals fundamentally agreed with the rate equation controlled by the shrinking core model.The results of this study are expected to serve as a reference for the evaluation of heavy metals contamination from stone coal waste rocks.展开更多
Calcification roasting–acid leaching of high-chromium vanadium slag(HCVS)was conducted to elucidate the roasting and leaching behaviors of vanadium and chromium.The effects of the purity of Ca O,molar ratio between C...Calcification roasting–acid leaching of high-chromium vanadium slag(HCVS)was conducted to elucidate the roasting and leaching behaviors of vanadium and chromium.The effects of the purity of Ca O,molar ratio between Ca O and V_2O_5(n(Ca O)/n(V_2O_5)),roasting temperature,holding time,and the heating rate used in the oxidation–calcification processes were investigated.The roasting process and mechanism were analyzed by X-ray diffraction(XRD),scanning electron microscopy(SEM),and thermogravimetry–differential scanning calorimetry(TG–DSC).The results show that most of vanadium reacted with Ca O to generate calcium vanadates and transferred into the leaching liquid,whereas almost all of the chromium remained in the leaching residue in the form of(Fe_(0.6)Cr_(0.4))_2O_3.Variation trends of the vanadium and chromium leaching ratios were always opposite because of the competitive reactions of oxidation and calcification between vanadium and chromium with Ca O.Moreover,Ca O was more likely to combine with vanadium,as further confirmed by thermodynamic analysis.When the HCVS with Ca O added in an n(Ca O)/n(V_2O_5)ratio of 0.5 was roasted in an air atmosphere at a heating rate of 10°C/min from room temperature to 950°C and maintained at this temperature for 60 min,the leaching ratios of vanadium and chromium reached91.14%and 0.49%,respectively;thus,efficient extraction of vanadium from HCVS was achieved and the leaching residue could be used as a new raw material for the extraction of chromium.Furthermore,the oxidation and calcification reactions of the spinel phases occurred at 592and 630°C for n(Ca O)/n(V_2O_5)ratios of 0.5 and 5,respectively.展开更多
This study aims to investigate the leaching behavior and filtration performance of zinc refinery residue under hydrothermal conditions. The relationships between the structure and morphology of silicon in the leaching...This study aims to investigate the leaching behavior and filtration performance of zinc refinery residue under hydrothermal conditions. The relationships between the structure and morphology of silicon in the leaching residue and the pulp filtration performance were explored by determining the pulp filtration speed, analyzing quantitatively the silicon content in the leachate, and characterizing the leaching residue structure. The results show that hydrothermal leaching induces the coagulation–hydrolysis of the silicon in solution, consequently altering the microstructure of the leaching residue, and that silicon oxygen tetrahedra([SiO_4]^(4-)) form the main skeleton structure of the residue. The results obtained also show that the leaching rates of zinc and copper are 98.1% and 98.7%, respectively, and that the filtration speed is 526.32 L/(m^2·h) under the conditions of sulfuric acid concentration of 140 g/L, leaching temperature of 160°C, leaching time of 3.0 h, oxygen partial pressure of 0.75 MPa, stirring speed of 600 r/min, and a liquid-to-solid ratio of 10 mL/g.展开更多
Increasing attention has been paid to air pollution control (APC) resi dues in China recently due to the rising proportion of waste incineration and th e hazardous characteristics of the residues, among which heavy me...Increasing attention has been paid to air pollution control (APC) resi dues in China recently due to the rising proportion of waste incineration and th e hazardous characteristics of the residues, among which heavy metal leaching to xicity plays an important role. Leaching behavior and potential risk of Pb and Z n in the APC residues from a Shanghai municipal solid waste (MSW) incinerator wa s studied, based on the leaching tests under different conditions and theoretica l calculation using a geochemical thermodynamic equilibrium model MINTEQA2. Res ults showed that, extractant species and liquid to solid (L/S) ratio predomina ntly controlled the leaching toxicity of Pb and Zn, while ionic strength, vibr ation method and leaching time had less effect on the metals release. Leachate/f inal pH determined the metal leaching behavior, which changed the speciation of heavy metals in the extraction system. The equilibrium aqueous speciation, preci pitation-dissolution of Pb and Zn was investigated according to the model comput ation, which was well in agreement with the experimental results.展开更多
The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solut...The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solution used on the curing,soaking,and leaching behavior of ag-glomerations.The results revealed that Portland cement(3CaO·SiO_(2),2CaO·SiO_(2),and 3CaO·Al_(2)O_(3))was the optimal binder for obtaining a well-shaped,stable agglomeration structure.A higher extraction rate was achieved when using Portland cement than that obtained using sodi-um silicate,gypsum,or acid-proof cement.An excessive geometric mean size is not conducive to obtaining well-shaped agglomerations and desirable porosity.Using computed tomography(CT)and MATLAB,the porosity of two-dimensional CT images in sample concentrations L1-L3 was observed to increase at least 4.5vol%after acid leaching.Ore agglomerations began to be heavily destroyed and even to disinteg-rate when the sulfuric acid solution concentration was higher than 30 g/L,which was caused by the excessive accumulation of reaction products and residuals.展开更多
The relationship between Pb leaching concentration and the solution's p H with time was analyzed when cement in its solidified form was leached in an acid medium. The effects of the particle size of the solidified...The relationship between Pb leaching concentration and the solution's p H with time was analyzed when cement in its solidified form was leached in an acid medium. The effects of the particle size of the solidified form, the cement adding method, and the hydration degree on Pb solidification were also investigated. The experimental results indicate that cement is quickly dissolved and hydrated in the acid medium, forming a C-S-H gel or silicic acid sol with good adsorption. When cement-Pb solidified form is leached in an acetate solution, the hydrated product erodes with time, so the Pb concentration increases slightly in the beginning. Then, some of the Pb ions are absorbed by the newly generated silicic acid sol, C-S-H. Others produce Pb(OH)2 precipitation for secondary solidification, leading to a gradual decrease in the Pb concentration in a leaching time of more than two hours. Moreover, the particle size of the solidified form has important effects on the Pb dissolution. When the amount of added cement is low, with a p H of less than 9.5, the solidification affects the sequence of the original cement powder, the cement hydrated powder, and the cementPb solidified form. When the added amount of cement increases with a pH of more than 11, the effect of adding methods on solidification decreases, and the solidified form is a little better than others.展开更多
The solidifying effect of cement addition on municipal solid waste incineration fly ash (MSWFA for short,collected from the gas exhaust system of MSW incinerator),the interaction of MSWFA with cement and water and the...The solidifying effect of cement addition on municipal solid waste incineration fly ash (MSWFA for short,collected from the gas exhaust system of MSW incinerator),the interaction of MSWFA with cement and water and the leaching of heavy metals from cement solidified MSWFA are investigated.The main results show that:(1) when MSWFA is mixed with cement and water,H 2 evolution,the formation and volume expansion of AFt will take place,the volume expansion can be reduced by ground rice husk ash addition;(2) heavy metals do leach from cement solidified MSWFA and at lower pH more leaching will occur;(3) compared with cement-solidified fly ash,the leachate of solidified MSWFA is with higher heavy metal contents;(4) with the increment of cement addition leached heavy metals are decreased;and (5) concentrations of Zn,Mn,Cu and Cd in all the leachates can meet the relevant Standards of Japan,but as the regulations for soil and groundwater protection of Japan are concerned,precautions against the leaching of Pb,Cl - and Cr 6+ and so on are needed.展开更多
The Yanzhou mine district, located in southwestern Shandong Province, is about 1300 km2 with more than 8×109 tons of proved coal reserves and there are 10 big power plants in this area. A large amount of coal ash...The Yanzhou mine district, located in southwestern Shandong Province, is about 1300 km2 with more than 8×109 tons of proved coal reserves and there are 10 big power plants in this area. A large amount of coal ashes, which are regarded as waste materials, have been stockpiled in the area and have influenced the environment of the mine district. In this paper, analysis of fly ash samples from three power plants is carried out, the enrichment and concentration of trace elements, Pb, Zn, Cu and As, in coal ashes are analyzed, and petrological and mineralogical characteristics and chemical compositions of coal ashes are studied. The aim of this work is to provide basic scientific data for utilization of ashes and reduction of environmental pollutions.展开更多
Butanedionedioxime, a small organic compound with low toxicity and good chemical stability, has been proposed as an effective gold ligand in gold extraction. The result of experiment shows that: 1) highly effective go...Butanedionedioxime, a small organic compound with low toxicity and good chemical stability, has been proposed as an effective gold ligand in gold extraction. The result of experiment shows that: 1) highly effective gold lixiviant can be composed of butanedionedioxime (BDM) with many oxidants, especially potassium permanganate; 2)in the leaching system of BDM KMnO 4 the suitable Ox/Lig(ratio of oxidants to gold ligands) range is 0.20～0.50, optimally 0.25～0.45 at the pH range of 7～11; 3) BDM KMnO 4 extraction of gold from an oxide ore is similar to cyanide(cyanide O 2) extraction, but the leaching rate of gold by BDM KMnO 4 is faster than that by cyanide O 2; 4) gold may readily be recovered by carbon adsorption and zinc precipitation.展开更多
The leaching behavior of three types of mortars was investigated using a self-design device which could simulate the field conditions of pipe lining. The results by ICP and ESEM measurement show that the developed sla...The leaching behavior of three types of mortars was investigated using a self-design device which could simulate the field conditions of pipe lining. The results by ICP and ESEM measurement show that the developed slag cement mortar is suitable for the lining of cast iron pipe that is used for delivering drinking water.展开更多
As the multibarrier system has been adopted to dispose HLW glass in geological formation in many coun- tries, it was important to study the leaching behavior of vitrification under geological formation. This article d...As the multibarrier system has been adopted to dispose HLW glass in geological formation in many coun- tries, it was important to study the leaching behavior of vitrification under geological formation. This article describes the leaching behavior of simulated high level waste glass (90Nd/10), which can incorporate 16 wt.% simulated HLW in five kinds of geological media, such as granite, cement, bentonite, Fe3O4, etc. The durable experimental results show that the glass had less mass loss in granite and more mass loss in bentonite after a two-year leaching test. The SEM/XEDS analysis shows some element distributions on the leached specimen’s surface, i.e., Na, Si and Mg ele- ments were reduced on the specimen’s surface, whereas Ba, Al, and Fe were enriched on the specimen’s surface.展开更多
The granite collected from the Yinshan Mountain and kaolinite has been selected for the leaching and adsorption experiment,respectively,aiming to clarify the enrichment processes of Li and Ga during the deposition.Res...The granite collected from the Yinshan Mountain and kaolinite has been selected for the leaching and adsorption experiment,respectively,aiming to clarify the enrichment processes of Li and Ga during the deposition.Results suggest both Li and Ga could be leached out from granite by using different acid solutions of different p H and kaolinite can adsorb Li and Ga with varying degrees.Lithium and Ga had the highest leaching ratio when p H=1.Special geological events(e.g.volcanic eruptions and wildfires),which could result in very low p H values of water in peatland,may have accelerated the release of Li and Ga from the source rocks.Kaolinite has the highest adsorption fraction was obtained at p H=8.The different characteristics of Li and Ga displayed in the leaching and adsorption experiments probably result from the different occurrences and enrichment processes of Li and Ga in the coals.Lithium was probably enriched before the Li carriers(e.g.kaolinite)had been transported into paleomires because of its high leaching ratio and high adsorption fraction under neutral and alkaline conditions,whereas Ga was more likely concentrated by kaolinite and other carriers after it had been transported into the peat mires.展开更多
Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the ...Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the impacts of rice straw(RS)and biochar amendments on the adsorption and leaching behavior of bispyribac-sodium in soil.Biochars were produced from RS at different pyrolysis temperatures and characterized using various spectral techniques.Rice straw had a surface area of 3.996×10^(4)m^(2)kg^(-1),which increased under pyrolysis;biochars prepared at 350 and 550℃(RS350 and RS550)in a closed furnace with limited oxygen supply had a surface area of 5.763×10^(4)and 6.890×10^(4)m^(2)kg^(-1),respectively,and biochar prepared by purging the pyroformer with N2(RSC)had the highest surface area of 12.173×10^(4)m^(2)kg^(-1).After amendment with RS and biochar,soil Freundlich adsorption capacity(KF ads)increased to varying extents in the order RSC>RS350>RS550,from 2.89×10^(3)to 29.57×10^(3)mg^(1-1)/nkg^(-1)L1/n,compared to1.55×10^(3)mg^(1-1)/nkg^(-1)L1/nin unamended soil.The variability in KF ads of bispyribac-sodium amongst the RS-and biochar-amended soils was dependent on the surface area of the amendments.The desorption of bispyribac-sodium decreased in the RS-and biochar-amended soils and varied from90.45%to 95.20%in unamended soils and from 60.95%to 89.50%in amended soils.The adsorption and desorption of bispyribac-sodium varied significantly depending on its concentration and the type and application rate of soil amendment.Different leaching risk evaluation indices,viz.,modified leach index(M.LEACH),leach index(LEACH),groundwater ubiquity score(GUS),Hornsby index(HI),leaching index(LIN),and pesticide leaching potential(PLP)index,were used to assess the susceptibility of groundwater to herbicide leaching.To reduce the repetitive effects of common parameters in each index,a new index was developed by employing principal component analysis(PCA)to condense their information into a single ranking.The results of the PCA indicated that RS and biochar amendments could be an effective management practice for controlling the leaching potential of bispyribac-sodium in soil.展开更多
To achieve the resource utilization of solid waste phosphogypsum(PG)and tackle the problem of utilizing potassium feldspar(PF),a coupled synergistic process between PG and PF is proposed in this paper.The study invest...To achieve the resource utilization of solid waste phosphogypsum(PG)and tackle the problem of utilizing potassium feldspar(PF),a coupled synergistic process between PG and PF is proposed in this paper.The study investigates the features of P and F in PG,and explores the decomposition of PF using hydrofluoric acid(HF)in the sulfuric acid system for K leaching and leaching of P and F in PG.The impact factors such as sulfuric acid concentration,reaction temperature,reaction time,material ratio(PG/PF),liquid–solid ratio,PF particle size,and PF calcination temperature on the leaching of P and K is systematically investigated in this paper.The results show that under optimal conditions,the leaching rate of K and P reach more than 93%and 96%,respectively.Kinetics study using shrinking core model(SCM)indicates two significant stages with internal diffusion predominantly controlling the leaching of K.The apparent activation energies of these two stages are 11.92 kJ·mol^(-1)and 11.55 kJ·mol^(-1),respectively.展开更多
The necessity to saline and sodic waters is sometimes used for irrigating agricultural activities under certain circumstances, but it is important to note that the use of these waters comes with specific consideration...The necessity to saline and sodic waters is sometimes used for irrigating agricultural activities under certain circumstances, but it is important to note that the use of these waters comes with specific considerations and limitations. One way to decrease undesirable effects of sodic waters on the physical and chemical properties of soils is to apply organic and chemical amendments within the soil. This study aimed to assess the effectiveness of saline water on soil acidity, alkalinity and nutrients leaching in sandy loamy soil at Bella flower farm, in Rwamagana District, Rwanda. The water used was from the Muhazi Lake which is classified as Class I (Saline water quality). Column leaching experiments using treated soils were then conducted under saturated conditions. The soil under experimental was first analyzed for its textural classification, soil properties and is classified as sandy loamy soil. The t-test was taken at 1%, 5% and 10% levels of statistical significance compared to control soil. The results indicated that the application of saline water to soils caused an increase in some soil nutrients like increase of Phosphorus (P), Potassium (K<sup>+</sup>), Magnesium (Mg2<sup>+</sup>), Sulphur (S), CN ratio and Sodium (Na<sup>+</sup>) and decreased soil texture, physical and chemical properties and remained soil nutrients. Consequently, the intensive addition of saline water leachates to soil in PVC pipes led to decreased of soil EC through leaching and a raiser Soluble Sodium Percentage (SSP). The rate of saline water application affected the increase accumulation of SAR and Na% in the top soil layers. The study indicated that saline water is an inefficient amendment for sandy soil with saline water irrigation. The study recommends further studies with similar topic with saline water irrigation, as it accentuated the alkalinity levels.展开更多
To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparat...To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.展开更多
The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous subs...The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.展开更多
基金finally supported by the National Natural Science Foundation of China(52174390,U1810205)Innovation Academy for Green Manufacture of the Chinese Academy of Sciences China(IAGM2022D04)Strategic Priority Research Program of the Chinese Academy of Sciences China(XDA21040601)。
文摘Coal gasification slag(CGS)is a type of solid waste produced during coal gasification,in which heavy metals severely restrict its resource utilization.In this work,the mineral occurrence and distribution of typical heavy metal Cr in CGS is investigated.The leaching behavior of Cr under different conditions is studied in detail.Acid leaching-selective oxidation-coprecipitation method is proposed based on the characteristics of Cr in CGS.The detoxification of Cr in CGS is realized,and the detoxification mechanism is clarified.Results show that Cr is highly enriched in CGS.The speciation of Cr is mainly residual fraction(74.47%-86.12%),which is combined with amorphous aluminosilicate.Cr^(3+)and Cr^(6+)account for 90.93%-94.82%and 5.18%-9.07%of total Cr,respectively.High acid concentration and high liquid-solid ratio are beneficial to destroy the lattice structure of amorphous aluminosilicate,thus improving the leaching efficiency of Cr,which can reach 97.93%under the optimal conditions.Acid leaching-selective oxidation-coprecipitation method can realize the detoxification of Cr in CGS.Under the optimal conditions,the removal rates of Fe^(3+)and Cr^(3+)in the leaching solution are 80.99%-84.79%and 70.58%-71.69%,respectively,while the loss rate of Al^(3+)is only 1.10%-3.35%.Detoxification slag exists in the form of Fe-Cr coprecipitation(Fe_(1-x)Cr_xOOH),which can be used for smelting.The detoxification acid leaching solution can be used to prepare inorganic polymer composite coagulant poly-aluminum chloride(PAC).This study can provide theoretical and data guidance for detoxification of heavy metal Cr in CGS and achieve resource utilization of coal gasification solid waste.
基金Project(2010CB630903)supported by the National Basic Research Program of China
文摘A hydrometallurgical process was developed for recycling pharmaceutical blisters.Leaching aluminum from pharmaceutical blisters using sodium hydroxide(NaOH) solutions was investigated with respect to leaching behaviors and kinetics.AL9(34) orthogonal design of experiments suggests that the most significant factor is NaOH concentration followed by temperature and leaching time.Factorial experiments demonstrate that the leaching rate of aluminum increases with increasing of the factors.The optimum conditions are temperature of 70 °C,leaching time of 20 min,NaOH concentration of 1.25 mol/L,liquid-to-solid mass ratio of 15:1 and agitation speed of 400 r/min.Under optimum conditions,the leaching rate is up to 100%,implying that aluminum and polyvinyl chloride(PVC) plastic in pharmaceutical blisters are separated completely.Kinetics of leaching aluminum is best described by the product layer diffusion control model,and the activation energy is calculated to be 19.26 kJ/mol.
基金financially supported by the Major Science and Technology Program for Water Pollution Control and Treatment of China (No.2015ZX07205003)
文摘This paper investigates the leaching behavior of heavy metals(V,Pb,Cd,Cr,and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments.The results show that the dissolved concentrations of V and As initially increased and then slightly decreased as time progressed and that the dissolved concentrations of Pb,Cd,and Cr were high in the early stage before decreasing.The particle size of the stone coal waste rocks strongly influenced the heavy metal concentration in the leaching solutions.The effects of the particle size of the stone coal waste rocks on the dissolved concentrations of V,Pb,and As decreased in the order fine fraction > medium fraction > coarse fraction,and the effects of particle size on the dissolved concentrations of Cr and Cd decreased in the order medium fraction > coarse fraction > fine fraction and coarse fraction > medium fraction > fine fraction,respectively.The quantities of heavy metals dissolved from the stone coal waste rock with fine particle sizes were observed to decrease in the order V(17104.36 μg/kg) > As(609.41 μg/kg) > Pb(469.24 μg/kg) > Cr(56.35 μg/kg) > Cd(27.52 μg/kg),and the dissolution rates decreased in the order As(2.96%) > Pb(0.93%) > V(0.35%) > Cd(0.25%) > Cr(0.01%).The specific surface area,pore size of the stone coal waste rocks,and chemical forms of heavy metals also influenced the release of heavy metals from the stone coal waste rocks.Kinetic analysis showed that the dissolution of heavy metals fundamentally agreed with the rate equation controlled by the shrinking core model.The results of this study are expected to serve as a reference for the evaluation of heavy metals contamination from stone coal waste rocks.
基金financially supported by the National Natural Science Foundation of China (Nos.51604065 and 51574082)the National Basic Research Program of China (No.2013CB632603)the Fundamental Funds for the Central Universities (Nos.150203003 and 150202001)
文摘Calcification roasting–acid leaching of high-chromium vanadium slag(HCVS)was conducted to elucidate the roasting and leaching behaviors of vanadium and chromium.The effects of the purity of Ca O,molar ratio between Ca O and V_2O_5(n(Ca O)/n(V_2O_5)),roasting temperature,holding time,and the heating rate used in the oxidation–calcification processes were investigated.The roasting process and mechanism were analyzed by X-ray diffraction(XRD),scanning electron microscopy(SEM),and thermogravimetry–differential scanning calorimetry(TG–DSC).The results show that most of vanadium reacted with Ca O to generate calcium vanadates and transferred into the leaching liquid,whereas almost all of the chromium remained in the leaching residue in the form of(Fe_(0.6)Cr_(0.4))_2O_3.Variation trends of the vanadium and chromium leaching ratios were always opposite because of the competitive reactions of oxidation and calcification between vanadium and chromium with Ca O.Moreover,Ca O was more likely to combine with vanadium,as further confirmed by thermodynamic analysis.When the HCVS with Ca O added in an n(Ca O)/n(V_2O_5)ratio of 0.5 was roasted in an air atmosphere at a heating rate of 10°C/min from room temperature to 950°C and maintained at this temperature for 60 min,the leaching ratios of vanadium and chromium reached91.14%and 0.49%,respectively;thus,efficient extraction of vanadium from HCVS was achieved and the leaching residue could be used as a new raw material for the extraction of chromium.Furthermore,the oxidation and calcification reactions of the spinel phases occurred at 592and 630°C for n(Ca O)/n(V_2O_5)ratios of 0.5 and 5,respectively.
基金financially supported by the National Natural Science Foundation of China(Nos.21566017 and 21266011)the National Innovation and Entrepreneurship Training Program for College Students(No.201710674161)
文摘This study aims to investigate the leaching behavior and filtration performance of zinc refinery residue under hydrothermal conditions. The relationships between the structure and morphology of silicon in the leaching residue and the pulp filtration performance were explored by determining the pulp filtration speed, analyzing quantitatively the silicon content in the leachate, and characterizing the leaching residue structure. The results show that hydrothermal leaching induces the coagulation–hydrolysis of the silicon in solution, consequently altering the microstructure of the leaching residue, and that silicon oxygen tetrahedra([SiO_4]^(4-)) form the main skeleton structure of the residue. The results obtained also show that the leaching rates of zinc and copper are 98.1% and 98.7%, respectively, and that the filtration speed is 526.32 L/(m^2·h) under the conditions of sulfuric acid concentration of 140 g/L, leaching temperature of 160°C, leaching time of 3.0 h, oxygen partial pressure of 0.75 MPa, stirring speed of 600 r/min, and a liquid-to-solid ratio of 10 mL/g.
基金The Key Project of Shanghai Council of Science and Technology(No. 032312043)
文摘Increasing attention has been paid to air pollution control (APC) resi dues in China recently due to the rising proportion of waste incineration and th e hazardous characteristics of the residues, among which heavy metal leaching to xicity plays an important role. Leaching behavior and potential risk of Pb and Z n in the APC residues from a Shanghai municipal solid waste (MSW) incinerator wa s studied, based on the leaching tests under different conditions and theoretica l calculation using a geochemical thermodynamic equilibrium model MINTEQA2. Res ults showed that, extractant species and liquid to solid (L/S) ratio predomina ntly controlled the leaching toxicity of Pb and Zn, while ionic strength, vibr ation method and leaching time had less effect on the metals release. Leachate/f inal pH determined the metal leaching behavior, which changed the speciation of heavy metals in the extraction system. The equilibrium aqueous speciation, preci pitation-dissolution of Pb and Zn was investigated according to the model comput ation, which was well in agreement with the experimental results.
基金This work was financially supported by the National Nat-ural Science Foundation for Excellent Youth of China(No.51722401)the State Key Research Development Program of China(No.2016YFC0600704)the Key Program of Na-tional Natural Science Foundation of China(No.51734001).
文摘The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solution used on the curing,soaking,and leaching behavior of ag-glomerations.The results revealed that Portland cement(3CaO·SiO_(2),2CaO·SiO_(2),and 3CaO·Al_(2)O_(3))was the optimal binder for obtaining a well-shaped,stable agglomeration structure.A higher extraction rate was achieved when using Portland cement than that obtained using sodi-um silicate,gypsum,or acid-proof cement.An excessive geometric mean size is not conducive to obtaining well-shaped agglomerations and desirable porosity.Using computed tomography(CT)and MATLAB,the porosity of two-dimensional CT images in sample concentrations L1-L3 was observed to increase at least 4.5vol%after acid leaching.Ore agglomerations began to be heavily destroyed and even to disinteg-rate when the sulfuric acid solution concentration was higher than 30 g/L,which was caused by the excessive accumulation of reaction products and residuals.
基金Found by the National High-tech Research and Development Program of China(No.SS2012AA062204)
文摘The relationship between Pb leaching concentration and the solution's p H with time was analyzed when cement in its solidified form was leached in an acid medium. The effects of the particle size of the solidified form, the cement adding method, and the hydration degree on Pb solidification were also investigated. The experimental results indicate that cement is quickly dissolved and hydrated in the acid medium, forming a C-S-H gel or silicic acid sol with good adsorption. When cement-Pb solidified form is leached in an acetate solution, the hydrated product erodes with time, so the Pb concentration increases slightly in the beginning. Then, some of the Pb ions are absorbed by the newly generated silicic acid sol, C-S-H. Others produce Pb(OH)2 precipitation for secondary solidification, leading to a gradual decrease in the Pb concentration in a leaching time of more than two hours. Moreover, the particle size of the solidified form has important effects on the Pb dissolution. When the amount of added cement is low, with a p H of less than 9.5, the solidification affects the sequence of the original cement powder, the cement hydrated powder, and the cementPb solidified form. When the added amount of cement increases with a pH of more than 11, the effect of adding methods on solidification decreases, and the solidified form is a little better than others.
文摘The solidifying effect of cement addition on municipal solid waste incineration fly ash (MSWFA for short,collected from the gas exhaust system of MSW incinerator),the interaction of MSWFA with cement and water and the leaching of heavy metals from cement solidified MSWFA are investigated.The main results show that:(1) when MSWFA is mixed with cement and water,H 2 evolution,the formation and volume expansion of AFt will take place,the volume expansion can be reduced by ground rice husk ash addition;(2) heavy metals do leach from cement solidified MSWFA and at lower pH more leaching will occur;(3) compared with cement-solidified fly ash,the leachate of solidified MSWFA is with higher heavy metal contents;(4) with the increment of cement addition leached heavy metals are decreased;and (5) concentrations of Zn,Mn,Cu and Cd in all the leachates can meet the relevant Standards of Japan,but as the regulations for soil and groundwater protection of Japan are concerned,precautions against the leaching of Pb,Cl - and Cr 6+ and so on are needed.
基金This work was supported by the National Natural Science Found of China(40133010,40273035)Natural Science Found of Anhui(04045064)
文摘The Yanzhou mine district, located in southwestern Shandong Province, is about 1300 km2 with more than 8×109 tons of proved coal reserves and there are 10 big power plants in this area. A large amount of coal ashes, which are regarded as waste materials, have been stockpiled in the area and have influenced the environment of the mine district. In this paper, analysis of fly ash samples from three power plants is carried out, the enrichment and concentration of trace elements, Pb, Zn, Cu and As, in coal ashes are analyzed, and petrological and mineralogical characteristics and chemical compositions of coal ashes are studied. The aim of this work is to provide basic scientific data for utilization of ashes and reduction of environmental pollutions.
文摘Butanedionedioxime, a small organic compound with low toxicity and good chemical stability, has been proposed as an effective gold ligand in gold extraction. The result of experiment shows that: 1) highly effective gold lixiviant can be composed of butanedionedioxime (BDM) with many oxidants, especially potassium permanganate; 2)in the leaching system of BDM KMnO 4 the suitable Ox/Lig(ratio of oxidants to gold ligands) range is 0.20～0.50, optimally 0.25～0.45 at the pH range of 7～11; 3) BDM KMnO 4 extraction of gold from an oxide ore is similar to cyanide(cyanide O 2) extraction, but the leaching rate of gold by BDM KMnO 4 is faster than that by cyanide O 2; 4) gold may readily be recovered by carbon adsorption and zinc precipitation.
文摘The leaching behavior of three types of mortars was investigated using a self-design device which could simulate the field conditions of pipe lining. The results by ICP and ESEM measurement show that the developed slag cement mortar is suitable for the lining of cast iron pipe that is used for delivering drinking water.
文摘As the multibarrier system has been adopted to dispose HLW glass in geological formation in many coun- tries, it was important to study the leaching behavior of vitrification under geological formation. This article describes the leaching behavior of simulated high level waste glass (90Nd/10), which can incorporate 16 wt.% simulated HLW in five kinds of geological media, such as granite, cement, bentonite, Fe3O4, etc. The durable experimental results show that the glass had less mass loss in granite and more mass loss in bentonite after a two-year leaching test. The SEM/XEDS analysis shows some element distributions on the leached specimen’s surface, i.e., Na, Si and Mg ele- ments were reduced on the specimen’s surface, whereas Ba, Al, and Fe were enriched on the specimen’s surface.
基金supported by the National Natural Science Foundation of China(41330317)the Natural Science Foundation of Hebei Province(D2021402017,D2021402036)。
文摘The granite collected from the Yinshan Mountain and kaolinite has been selected for the leaching and adsorption experiment,respectively,aiming to clarify the enrichment processes of Li and Ga during the deposition.Results suggest both Li and Ga could be leached out from granite by using different acid solutions of different p H and kaolinite can adsorb Li and Ga with varying degrees.Lithium and Ga had the highest leaching ratio when p H=1.Special geological events(e.g.volcanic eruptions and wildfires),which could result in very low p H values of water in peatland,may have accelerated the release of Li and Ga from the source rocks.Kaolinite has the highest adsorption fraction was obtained at p H=8.The different characteristics of Li and Ga displayed in the leaching and adsorption experiments probably result from the different occurrences and enrichment processes of Li and Ga in the coals.Lithium was probably enriched before the Li carriers(e.g.kaolinite)had been transported into paleomires because of its high leaching ratio and high adsorption fraction under neutral and alkaline conditions,whereas Ga was more likely concentrated by kaolinite and other carriers after it had been transported into the peat mires.
文摘Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the impacts of rice straw(RS)and biochar amendments on the adsorption and leaching behavior of bispyribac-sodium in soil.Biochars were produced from RS at different pyrolysis temperatures and characterized using various spectral techniques.Rice straw had a surface area of 3.996×10^(4)m^(2)kg^(-1),which increased under pyrolysis;biochars prepared at 350 and 550℃(RS350 and RS550)in a closed furnace with limited oxygen supply had a surface area of 5.763×10^(4)and 6.890×10^(4)m^(2)kg^(-1),respectively,and biochar prepared by purging the pyroformer with N2(RSC)had the highest surface area of 12.173×10^(4)m^(2)kg^(-1).After amendment with RS and biochar,soil Freundlich adsorption capacity(KF ads)increased to varying extents in the order RSC>RS350>RS550,from 2.89×10^(3)to 29.57×10^(3)mg^(1-1)/nkg^(-1)L1/n,compared to1.55×10^(3)mg^(1-1)/nkg^(-1)L1/nin unamended soil.The variability in KF ads of bispyribac-sodium amongst the RS-and biochar-amended soils was dependent on the surface area of the amendments.The desorption of bispyribac-sodium decreased in the RS-and biochar-amended soils and varied from90.45%to 95.20%in unamended soils and from 60.95%to 89.50%in amended soils.The adsorption and desorption of bispyribac-sodium varied significantly depending on its concentration and the type and application rate of soil amendment.Different leaching risk evaluation indices,viz.,modified leach index(M.LEACH),leach index(LEACH),groundwater ubiquity score(GUS),Hornsby index(HI),leaching index(LIN),and pesticide leaching potential(PLP)index,were used to assess the susceptibility of groundwater to herbicide leaching.To reduce the repetitive effects of common parameters in each index,a new index was developed by employing principal component analysis(PCA)to condense their information into a single ranking.The results of the PCA indicated that RS and biochar amendments could be an effective management practice for controlling the leaching potential of bispyribac-sodium in soil.
基金jointly supported by the National Key Research and Development Program of China (2019YFC1905800)the National Key Research & Development Program of China (2018YFC1903500)+4 种基金the commercial project by Beijing Zhong Dian Hua Yuan Environment Protection Technology Co., Ltd. (E01211200005)the Regional key projects of the science and technology service network program (STS program) of the Chinese Academy of Sciences (KFJ-STS-QYZD-153)the Ningbo Science and Technology Innovation Key Projects (2020Z099, 2022Z028)the Ningbo Municipal Commonweal Key Program (2019C10033)the support of Mineral Resources Analytical and Testing Center, Institute of Process Engineering, Chinese Academy of Science
文摘To achieve the resource utilization of solid waste phosphogypsum(PG)and tackle the problem of utilizing potassium feldspar(PF),a coupled synergistic process between PG and PF is proposed in this paper.The study investigates the features of P and F in PG,and explores the decomposition of PF using hydrofluoric acid(HF)in the sulfuric acid system for K leaching and leaching of P and F in PG.The impact factors such as sulfuric acid concentration,reaction temperature,reaction time,material ratio(PG/PF),liquid–solid ratio,PF particle size,and PF calcination temperature on the leaching of P and K is systematically investigated in this paper.The results show that under optimal conditions,the leaching rate of K and P reach more than 93%and 96%,respectively.Kinetics study using shrinking core model(SCM)indicates two significant stages with internal diffusion predominantly controlling the leaching of K.The apparent activation energies of these two stages are 11.92 kJ·mol^(-1)and 11.55 kJ·mol^(-1),respectively.
文摘The necessity to saline and sodic waters is sometimes used for irrigating agricultural activities under certain circumstances, but it is important to note that the use of these waters comes with specific considerations and limitations. One way to decrease undesirable effects of sodic waters on the physical and chemical properties of soils is to apply organic and chemical amendments within the soil. This study aimed to assess the effectiveness of saline water on soil acidity, alkalinity and nutrients leaching in sandy loamy soil at Bella flower farm, in Rwamagana District, Rwanda. The water used was from the Muhazi Lake which is classified as Class I (Saline water quality). Column leaching experiments using treated soils were then conducted under saturated conditions. The soil under experimental was first analyzed for its textural classification, soil properties and is classified as sandy loamy soil. The t-test was taken at 1%, 5% and 10% levels of statistical significance compared to control soil. The results indicated that the application of saline water to soils caused an increase in some soil nutrients like increase of Phosphorus (P), Potassium (K<sup>+</sup>), Magnesium (Mg2<sup>+</sup>), Sulphur (S), CN ratio and Sodium (Na<sup>+</sup>) and decreased soil texture, physical and chemical properties and remained soil nutrients. Consequently, the intensive addition of saline water leachates to soil in PVC pipes led to decreased of soil EC through leaching and a raiser Soluble Sodium Percentage (SSP). The rate of saline water application affected the increase accumulation of SAR and Na% in the top soil layers. The study indicated that saline water is an inefficient amendment for sandy soil with saline water irrigation. The study recommends further studies with similar topic with saline water irrigation, as it accentuated the alkalinity levels.
基金Funded by the National Natural Science Foundation of China Youth Fund(No.52204419)the Liaoning Provincial Natural Science Foundation(No.2022-BS-076)the Guangxi Science and Technology Major Project(No.2021AA12013)。
文摘To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.
基金supported by Key R&D Program of Zhejiang Province,China (No.2022C03061)the National Natural Science Foundation of China (No.52074204)the Fundamental Research Funds for the Central Universities (No.2023-vb-032).
文摘The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.
